DAQ Cards Software Installation Guide_50-10005-105
Contents
1. 17 When the software component installation process has completed Setup will launch the DAQ Configuration Utility PciUti or D2kUtil This utility is provided for configuring the card Refer to the DAQ Configuration Utility section to learn how use this utility When the installation process is completed the PC S LVIEW directory should contain the following files and sub directories File Sub director Description _ A copy of VI library It is also copied to Ee lt LabVIEW Dir gt User lib directory Util lt DIR gt DAQ Configuration utilit Manual lt DIR gt PDF manual files including User Guide and Function Reference Help lt DIR gt On line help file PCIS LVIEW onl mnu files They are also copied to Menus lt DIR gt lt LabVIEW Dir gt Menus directory 6208 Samples lt DIR gt 7200 Samples lt DIR gt 7230 Samples lt DIR gt Sample programs for each kind of card Please check if the following files are copied to your LabVIEW directory 1 If the Piv llb D2kLv llo file doesn t exist in the lt LabVIEW Dir gt User lib directory please copy it from the lt lnstallation Dir gt 2 If the lt LabVIEW Dir gt Menus does not have the ADLINK or Daq_2000 sub directory or there is no file in these sub directory please copy all files in the lt lnstallation Dir gt Menus to lt LabVIEW Dir gt Menus adlink or lt Lab VIEW Dir gt Menus Daq_2000 directory Windows 98 2000 XP After installing PCIS LVIEW2. CompactPCI DAQ devices Then please install the device driver according to the procedures described in Device Installation in Windows 98 chapter Situation 5 Performing continuous operations failed Windows 98 NT 2000 XP Actions 1 The memory size of the initially allocated memory for the Al DI DO for your device is not assigned or not large enough Use the DAQ configuration utility PciUtil or D2kUtil to set or modify the memory size Please refer to DAQ Configuration Utility chapter for operation procedures for this utility 2 The buffer size your program asks for currently exceeds the memory size for the initially allocated memory Use the related memory allocation size report function e g Al_InitialMemoryAllocated to check the size value 38 e Trouble Shooting Situation6 Inserting a new cards before installing ADLINK software drivers and Windows 98 2000 XP informs you of an unsuccessful device installation Actions 1 Because the System Driver Files SYS are un searchable the devices will not operate properly To solve this problem install the PCIS DASK D2K DASK software driver After installing all appropriate ADLINK software PCIS DASK PCIS LVIEW DA Bench etc all necessary device information files LINE and system driver files SYS will be copied to their proper directories All devices installed should now all operate properly Trouble Shooting e 39 Warranty Policy Thank you for choosing ADLINK
3. including INF files Win98 2000 XP_ only DLL files driver files and all sample programs e Compact Installs a minimum set of files to your hard disk Only INF files Win98 2000 XP only DLL files and driver files are installed e Custom The Custom Installation dialog box is displayed for you to select the sample programs of the cards you want to install The Custom Installation dialog box is shown below 14 e Windows 98 NT 2000 XP The selective components include Libraries amp all sample programs However for trouble free operation of the PC IS DASK or D2K DASK Library components are required Hence Library components MUST be selected When the software component installation process has completed Setup will launch the DAQ Configuration Utility PciUtil or D2kUtil This utility is provided for configuring the card Refer to the DAQ Configuration Utility section to learn how use this utility If you choose the Typical option in the Select Components window when the installation process is completed the installation directory should contain the following files and sub directories _File Sub directory Desepgon Import library and DLL Pci Dask lib or LIB lt DIR gt D2K Dask lib for Visual C C Pdask_bc lib or D2kDask_bc lib for Borland C Include files for application programming DASK BAS or D2KDASK BAS for Visual Basic Programming DASK H or INGENDE lt DIR gt D2KDASK H for C C program
4. 0 The main window of the DAQ Configuration utility is shown below With Windows NT systems if any PCI card drivers have been registered it will show in the Registered Drivers list NuDAQ PCINuIPC CompectPCl NT Driver Registy EI EG Exit This utility is used to make NuDAQ PCI NulPC CompactPCI NT driver registry Registered Drivers e Modify Remove IP Done 26 e NUDAQ Configuration Utility ee click the New button and a ES a Driver Configuration window will appear Card Type In this window users can Buffer Allocated KB select the driver they want to register and input the Al 1024 parameters in the box corresponding to the Al AO E DI or DO for the requirement of your application The Buffer Allocated for Al AO DI DO represents the size of the contiguous Initially Allocated memory for continuous analog input analog output digital input digital output respectively Its unit is Kbytes i e 1024 bytes The Device driver will try to allocate the memory size at system startup time If the system is not able to provide the memory size specified the device driver will allocate the largest possible size it can You can use Al DI DO_InitialMemoryAllocated function to retrieve the memory size allocated Only the fields that are available to the card are enabled the others are grayed out The size of the initially allocated memory is the maximum memory size the DMA or In
5. D2K LVIEW the INF files and Driver files are copied into appropriate directories With the well installed Device Information Files INF and Device Driver Files SYS Windows 98 2000 XP system will identify and install any new plugged data acquisition card automatically 18 e Windows 98 NT 2000 XP Windows NT 4 0 After loading Windows NT and all the devices you wish to operate have been plugged into your computer make sure the PC IS DASK D2K DASK device drivers corresponding to the cards are started For the PCI S DASK D2K DASK to be able to communicate with the DAQ cards the Garde own device driver e g PCI6208 PCI7200 DAQ2010 etc must be started You can check by opening the Control Panel double click Devices and a Devices window will be load as shown below Dese Stats Snap Ba Wie za A Dpast ed Se Sang Hai Protos Dises gt Help If the device status is none you have to select the device and then press the Start button Windows 98 NT 2000 XP 19 3 2 4 VEE Drivers PCIS VEE D2K VEE step 1 Place ADLINK All In One CD into the appropriate CD ROM drive step 2 If the Autorun setup program is not invoked automatically manually execute X Setup exe X indicates the CD ROM drive step 3 PCI cPCI series Select Software Package gt NuDAQ PCI Software gt PCIS VEE gt Win98 NT 2000 XP to install PCIS VEE DAQ 2000 series Select Software Package gt DAQ 2000 Series Soft
6. Windows 2000 XP will be able to identify and initiate any data acquisition card automatically at system startup time After installing ADLINK s Windows 2000 XP software driver and re booting the system to check if the installation process was a success you can open the Device Manager Start gt gt Settings gt gt Control Panel gt gt System and then select the Hardware tab System Properties 21 x General Network Identification Hardware User Profiles Advanced gt Hardware Wizard The Hardware wizard helps you install uninstall repair ag unplug eject and configure your hardware Hardware Wizard r Device Manager Dm The Device Manager lists all the hardware devices installed on your computer Use the Device Manager to change the properties of any device m Hardware Profiles Hardware profiles provide a way for you to set up and store zg different hardware configurations Hardware Profiles In the Device Manager you should find the device under NUDAQ Boards Double click on the device and select the Resources tab to check if the I O port and IRQ resources for the device are allocated successfully 12 e Windows 98 NT 2000 XP 3 2 Software Drivers Installation 3 2 1 System Requirements e An IBM PC AT or compatibles running Windows 98 NT 2000 XP e A hard disk with enough disk space to install the software driver e ACD ROM drive or 1 44 MB 3 5 inch floppy disk
7. drive e Application development system PCIS DASK D2K DASK any Windows programming language that allows calls to a DLL such as Microsoft Visual C C Microsoft Visual Basic etc PCIS LVIEW D2K LVIEW Need National Instruments LabVIEW version 4 0 or later PCIS VEE D2K VEE Need VEE version 4 0 or later e PCl cPCI series or DAQ 2000 series data acquisition cards that the software driver supports 3 2 2 DLL PCIS DASK D2K DASK With PCI xxxx or cPCI xxxx cards please use the PCIS DASK With the DAQ 2000 series cards please use D2K DASK In the following we will be using the PCl 7230 cPCI 7230 and DAQ 2010 as example unless otherwise specified to illustrate how to install the Windows 98 NT 2000 XP DLL drivers The installation procedures for the other PCI cards are the same step 1 step 2 step 3 Place the ADLINK AFIn One CD into the appropriate CD ROM drive If the Autorun setup program is not invoked automatically manually execute X Setup exe X indicates the CD ROM drive PCI 7230 cPCI 7230 Select Driver Installation gt NuDAQ PCI PCI 7230 Win98 NT 2000 XP to setup the NUDAQ PCI DLL driver PCIS DASk DAQ 2010 Select Driver Installation DAQ 2000 series gt DAQ 2010 gt Win98 NT 2000 XP to setup the DAQ 2000 series DLL driver D2K DASKk Windows 98 NT 2000 XP e 13 You can install the PC S DASK D2K DASK with any one of the following options e Typical Install all files to the hard disk
8. is Kbytes i e 1024 bytes The Device driver will try to allocate the memory size at system startup time If the system is not able to provide the memory size specified the device driver will allocate the largest possible size it can You can use Al DI DO_InitialMemoryAllocated function to retrieve the memory size allocated Only the fields that are available to the card are enabled the others are grayed out The size of the initially allocated memory is the maximum memory size the DMA or Interrupt transfer can perform Unexpected errors will result if the DMA or Interrupt transfer exceeds the initially allocated size 28 e NUDAQ Configuration Utility After the device configurations of the driver you have selected are completed click the OK button to register the driver and return to the main window The driver you just registered will be shown in the registered drivers list You can now exit the registration utility using the EXIT command in the menu bar or click the Done button To activate the registered drivers you need to restart your Windows 98 2000 XP system NuDAQ Configuration Utility e 29 5 3 Linux dask_conf is used for users to configure the PCIS DASK drivers removing the configured drivers and setting modifying the allocated buffer sizes for the Al AO DI and DO The default location of this utility is pci dask_xxx util directory The dask_util main screen is shown below If any PCIS DASK card driver s have been regi
9. the Device Manager under Other Devices Windows 95 DLL for this device will not recognize the device as a valid DAQ device Follow these steps to correct the problem 1 Open the Windows 95 Device Manager a From the Start menu select Settings gt gt Control Panel b From the Control Panel double click on System c In the System Properties dialog box select the Device Manager tab 2 Under Other Devices remove the entries that correspond to your DAQ devices Trouble Shooting e 37 3 Restart your system Windows 95 will try to re identify al of your PCI or CompactPCI DAQ devices Then follow the installation procedures for the device driver according to the Device Installation section of Windows 95 of chapter 3 4 If the problem still persists please run the PCI_SCAN utility under a pure DOS environment and send us the log file and any information from the Device Manager Situation 4 If you want to use ADLINK Windows 98 software drivers PCIS DASK PCIS VIEW DAQBench etc but the devices have been installed with Windows 95 software library Actions 1 Open the Windows 98 Device Manager a From the Start menu select Settings gt gt Control Panel From the Control Panel double click on System c In the System Properties dialog box select the Device Manager tab 2 Under DAQ remove the entries that correspond to your DAQ devices 3 Restart your system Windows 98 will re identify all of your PCI or
10. well together because of Windows 98 2000 XP s Plug and Play capabilities Once Windows 98 2000 XP has started the Plug and Play function will find and locate the new PCl CompactPCl cards If this is the first time your Windows system is operating with the installed ADLINK DAQ cards and you haven t installed the ADLINK Windows 98 2000 XP software drivers PCIS DASK PCIS LVIEW D2K DASK etc you will be informed to install the device drivers Windows NT is not a Plug and Play system If you are using Windows NT please skip this section and go to section 3 2 Software Drivers Installation 3 1 1 Windows 98 Windows 98 prompts the following window to inform you to install the device driver Click the Next button to XOINI continue with installing This wizard zostches for nee diverz hoe the device The device f PO Cad information files are located in the gas A dence divsri a rolus pogan thet maker a InADASK9Y8Inf directory hardware device moth of the ADLINK All In One CD 10 e Windows 98 NT 2000 XP After installing the ADLINK Windows 98 software driver the INF files and driver files are copied into its appropriate directories With the installed Device Information Files INF and Device Driver Files SYS Windows 98 will be able to identify and initiate any data acquisition card automatically at system startup time After installing ADLINK s Windows 98 software driver and re booting the system to ch
11. ADLINK PCI CompactPCI DAQ Cards Software Installation Guide Recycled Paper Copyright 1999 2002 ADLINK Technology Inc All Rights Reserved Manual Rev 4 20 December 12 2002 Part No 50 10005 105 The information in this document is subject to change without prior notice in order to improve reliability design and function and does not represent a commitment on the part of the manufacturer In no event will the manufacturer be liable for direct indirect special incidental or consequential damages arising out of the use or inability to use the product or documentation even if advised of the possibility of such damages This document contains proprietary information protected by copyright All rights are reserved No part of this manual may be reproduced by any mechanical electronic or other means in any form without prior written permission of the manufacturer Trademarks NuDAQ NulPC PCIS DASK DAQBench and PCI series product names are registered trademarks of ADLINK Technology Inc Other product names mentioned herein are used for identification purposes only and may be trademarks and or registered trademarks of their respective companies Getting service from ADLINK e Customer Satisfaction is the most important priority for ADLINK Tech Inc If you need any help or service please contact us ADLINK Technology Inc Web Site http www adlinktech com Sales amp Service Service adlinktech com NuDAQ USBDAQ
12. Garde own device driver e g PCI6208 PCI7200 DAQ2010 etc must be started You can check by opening the Control Panel double click Devices and a Devices window will be load as shown below Diabet HIID feel da Destied Aelita Datei SC T e Dpstied Sage Dasti zl If the device status is none you have to select the device and then press the Start button Windows 98 NT 2000 XP e 21 Linux 4 1 Software Drivers Installation 4 1 1 System Requirements e An IBM PC AT or compatibles running Linux Kernel 2 2 12 or later e A hard disk with enough disk space to install PCIS DASK e ACD ROM drive or 1 44 MB 3 5 inch floppy disk drive e Application development system PCIS DASK Using the appropriated C C compiler gcc or cc to compile the program e NuDAQ PCl bus or NulIPC CompactPCI data acquisition cards with PCIS DASK support 4 1 2 Install PCIS DASK X Step 1 UNPACK Place ADLINK All In One CD into the appropriate CD ROM drive Decompress the file TGZ file in the Software PCIS DASK Linux directory according to your Linux version of your system Refer to the file Software Pcis dask Linux Readme txt to identify which version of Linux the file supports ex tar xvzf pci dask_320 2 2 18 tgz 22 e Linux This will extract the pci dask_xxx where xxx in pci dask_xxx is the version number directory with the following subdirectories File Sub directory Description __ PCIS DA
13. PXI nudaq adlinktech com Technical EES 9F No 166 Jian Yi Road Chungho City Taipei 235 Taiwan e Please email or FAX us of your detailed information for a prompt satisfactory and constant service Detailed Company Information Company Organization Contact Person FAX Address Country Product Model OS Computer Brand MB CPU Environment to Use Chipset BIOS Video Card Network Interface Card Other Table of Contents Chapter 1 DOS ei iiicissistsascnctieaieuestsiscnsicseranssivedauatdvncsmesdenationusen 1 1 1 DOS Borland C and Microsoft C Library and Utility 1 Chapter 2 Windows op 4 2 1 Device Installation ccccceeeceeeeeceeeeeeeeeeeeeeeaeeeeneeeeaes 4 2 2 Software Driver Installation cceceeeeeeeeeeeeeeeeeeenees 7 2 2 1 DEL RO 7 2 2 2 LabVIEW Driver DCIGIWIEWo5 8 2 2 3 VEE Drivers DCS VMEEOR 9 Chapter 3 Windows O8INTIZOO0DIXP 10 3 1 Device Installation ccccceeeceeeeeeeeeeeeeeeseeeeeaeeeseeeees 10 glit WANG OWS EEN 10 3 1 2 Windows 2000 KP senretene oiiaii nieres 11 3 2 Software Drivers Installation ccceceeeeeeeeeeeeeeeees 13 3 2 1 System Heouiremente AE 13 3 2 2 DLL PCISDAck 2k DACk 13 3 2 3 LabVIEW Driver PCIS LVIEW D2K LVIEW 000000 17 3 2 4 VEE Drivers DCIeGVEEDZkK WEE 20 Chapter 4 Linux 2 2020 2 04scistesganccieestniaetesspetantendecetanetecss 22 4 1 Software Drivers Installatio
14. SK shared library UD SPIE libpci dask so for linux Include files for application programming dask h for C C programming Kernel modules for NUDAQ PCkcards Include lt DIR gt drivers lt DIR gt High_Memory Management Module Installation Script Function Reference Step 2 RESERVE MEMORY Note If you DO NOT perform any continuous operation you can skip this step and jump to steps For contiguous memory allocation we reserve memory in the upper memory space Users need to pass a command line argument to the kernel There are two ways to do this Suppose you have 64MB RAM and want to reserve 4MB memory for devices 1 Insert mem keyword to boot loader configuration file a If you use LILO as boot loader you can add append statement to the file etc lilo conf In file lilo conf boot dev hda prompt image boot vmlinuz 2 2 12 20 label linux initrd boot initrd 2 2 12 20 img read only root dev hda9 append mem 60M Linux 23 b If you use GRUB as boot loader add mem statement to the file etc grub con default 0 timeout 10 splashimage hd0 1 boot grub splash xpm gz title Red Hat Linux 2 4 18 3 root hdO 1 kernel boot vmlinuz 2 4 18 3 ro root dev hda1 mem 60M Note You have to manually execute the sbin lilo to make the setting active Linux does not reserve memory for you automatically 2 You can specify this command line arguments to the
15. To understand your rights and enjoy all the after sales services we offer please read the following carefully 1 Before using ADLINK s products please read the user manual and follow the instructions exactly When sending in damaged products for repair please attach an RMA application form 2 All ADLINK products come with a two year guarantee free of repair charge e The warranty period starts from the product s shipment date from ADLINK s factory e Peripherals and third party products not manufactured by ADLINK will be covered by the original manufacturers warranty e End users requiring maintenance services should contact their local dealers Local warranty conditions will depend on the local dealers 3 Our repair service does not cover the two year warranty if damages are cause by the following events a Damage caused by not following instructions in the users manual b Damage caused by carelessness on the users part during product transportation c Damage caused by fire earthquakes floods lightening pollution and incorrect usage of voltage transformers d Damage caused by unsuitable storage environments with high temperatures high humidity or volatile chemicals e Damage caused by leakage of battery fluid when changing batteries f Damages from improper repair by unauthorized technicians g Products with altered and damaged serial numbers are not entitled to our service h Other categor
16. ce will be loaded to the screen ADLINK NuDAQ PCI Installation PCI6208 PCI6308 PCI7200 PCI7230 PCI7233 PCI7234 PCI7248 PCI7250 PCI7296 PCI7300 PCI7396 PCI7432 PCI7433 Install directory AADLINK 3 Press Up or Down key to select the card model then press Enter to continue Then type the path name where you want the program Rev 3 00 DOS Version C CopyRight ADLINK Technology Inc 2000 3 1 Press UP or DOWN key to select a card or ESC to exit A ADL ADL ADL AD ADL AD ADL AD ADL ADL ADL files to be installed to ADLINK NuDAQ PCI Installation C CopyRight ADLINK Technology Inc DLINK PCI6208 DAQ Card NK PCI6308 DAQ Card INK PCI7200 DAQ Card NK PCI7230 DAQ Card NK PCI7233 DAQ Card NK PCI7234 DAQ Card NK PCI7248 DAQ Card NK PCI7250 DAQ Card NK PCI7296 DAQ Card NK PCI7300 DAQ Card INK PCI7396 DAQ Card NK PCI7432 DAQ Card NK PCI7433 DAQ Card Rev 3 00 DOS Version 2000 3 1 Setup will install PC16208 in the following directory To change to another directory please input the directory that you want to ins tall C ADLINK Press Enter Install directory C ADLINK 2 e DOS to install or ESC to back 4 Use Upor Down key to select what kind of the library you want to install ADLINK NuDAQ PCI Installation Rev 3 00 DOS Version C CopyRight ADLINK Technology Inc 20003 Press UP or DOWN key to select or ESC to go back Borland C Library Samples and Utilit
17. diagnosing BIOS compatibility and DOS installation problems For the operating system device driver installation and operating system compatibility problem within the Windows system refer to section 7 2 a b c What problem can be diagnosed using PCl_SCAN EXE PCI_SCAN utility is used primarily to list the BIOS setting It does not solve installation problem but can be use to list the systems PCI resources check if the BIOS has assigned the correct resources to your PCI I O cards and check if the BIOS assignments conflict with other resources of different I O devices How to use this utility Whenever your install card does not function probably please run this utility at first 1 When the system is powered on the BIOS assign resources to the PCI add on card 2 This utility must run under a pure DOS environment It calls the BIOS to list all the PCI resources in your computer and displays the information to the screen 3 It logs the BIOS setting to the file PCI_SCAN LOG 4 Some operating systems like Windows 98 may change the BIOS default setting the I O card resources under Windows 98 or NT may differ from that under a pure DOS environment Therefore we recommend you run this utility under a pure DOS environment What is the log file used for If there is an installation problem please send us the log file We can help with diagnostics if its is related to a BIOS compatibility problem Troubl
18. dow is displayed This window allows you to specify the location of the device information Place the ADLINK All In One CD into the CD ROM drive then click the Other Locations button Windows was unable to locate a driver for this device If you do not want to install a driver now click Finish To search for a driver manually click Other Locations Or to begin the automatic search again click Back Select Other Location x Type the name of the folder that contains the driver you want To search for a folder click Browse The following window then Location is prompted for you to Ss specify the location of the device information Browse for Folder 21 x Select the folder that contains driver information for Click the Browse button to this device invoke the Browsers Folder window then select the appropriate location of the NuDAQ NuIPC card s device information Desktop 80 9 3 Floppy A Windows95 C Windowsnt ID Lal Control Panel Lol Printers Let Dial Up Networking Network Neighborhood Gg Recycle Bin E My Briefcase Online Services F Geet _ Windows 95 5 The device information files INF are located in X nf Win95iInf lt model_number gt x indicates the CD ROM drive For example the device information for the PCI 7432 is located in X VnfilWin95Inf 7432 To de
19. e Device Manager If not Windows might have classified the NuDAQ PCI or NulPC CompactPCI DAQ device as a generic device and installed it in the Device Manager under Other Devices ADLINK Windows 98 2000 XP software drivers do not recognize the device as a valid DAQ device 36 e Trouble Shooting 2 Follow these steps to correct the problem 1 Open the Windows Device Manager From the Start menu select Settings gt gt Control Panel From the Control Panel double click on System c In the System Properties dialog box select the Device Manager tab 2 Under Other Devices remove the entries that correspond to your DAQ devices 3 Restart your system Windows will try to re identify all of your PCI or CompactPCI DAQ devices Then follow the installation procedures for the device driver according to the Device Installation section of Windows 98 NT 2000 XP of chapter 3 4 If the problem still persists please run the PCI_SCAN utility under a pure DOS environment and send us the log file and any information from the Device Manager Situation3 After installation and restarting Windows 95 the device doesn t work Actions Is the device installed or Not If the device was installed correctly by using the correct INF file you should be able to find this device under DAQ class in the Device Manager If not Windows 95 may have classified the NuDAQ PCI or NulPC CompactPCI DAQ device as a generic device and installed it in
20. e Shooting e 35 7 2 Windows 95 98 NT 2000 XP Trouble Shooting Situation1 After installation and restarting Windows NT the device doesn t work Actions 1 Does the driver appear in the registry list or not If not use the DAQ configuration utility PciUtil or D2kUtil to add the device to the registry Please refer to the DAQ Configuration Utility chapter for operation details 2 If the driver is listed in the registry check the device status in Devices window Control Panel gt gt Devices If the device status is none activate it using the following steps 1 Select the device and then press the Start button 2 If the device does not started after pressing the Start button record the error message shown 3 Run the Ntfdpci utility This utility is located under the Utility PCI_SCANINT directory of the ADLINK All In One CD Install the utility RE START the system and run Ntfdpci exe in the installed directory 4 A log file NtPci dat is generated after running the Ntfdpci exe program Send us this log file and the error message obtained from step 2 This will help us diagnose the problem with your card Situation2 After installation and restarting Windows 98 2000 XP the device doesn t work Actions 1 Is the device installed or not If the device was installed correctly using the correct INF file you should be able to find this device under NuDAQ class win98 or NuDAQ Boards class Win2000 XP in th
21. eck if the installation System Properties Gowd Device Nanpi Juste Pafomercs E View dewces by lype 1 View dear by connection process was a success you can open the Device Manager in Siart gt gt Settings gt gt Control Panel gt gt System and select the Device Manager tab In the Device Manager you should find the device under NuDAQ Double click on the device select the Resources tab to check if the I O port and IRQ resources for the device are allocated successfully 3 1 2 Windows 2000 XP Windows 2000 XP prompts the following window to inform you to install the device drivers Click the Next button to continue with installing the device The device information files are located in the In DASK2000Inf directory of the ADLINK All In One CD a 3 CDAGH a ech Dist dee a BI Display adapters 4 Popeye cick conto ters a sch Hard dd cortrodere al 2 Fejboad D a Morts 3 F3 Mouse at EI Necio adape Noa L Abt pt POI 7226 4 J Porte COW LLDT a BB Gier devices Found New Hardware Wizard Welcome to the Found New Hardware Wizard This wizard helps you install a device driver for a hardware device To continue click Next Bach Cancel Windows 98 NT 2000 XP e 11 After installing ADLINK s Windows 2000 XP software driver the INF files and driver files are copied into its appropriate directories With the installed Device Information Files INF and Device Driver Files SYS
22. es Sub directory PDF manual files including User Guide and Manual lt DIR gt Function Reference Help lt DIR gt On line help file A copy of all library files llb These files are Lib lt DIR gt also copied to lt LabVIEW Dir gt User lib directory 6208 lt DIR gt 7200 lt DIR gt 7230 lt DIR gt Example programs for each card Be Windows 95 All the PCIS LVIEW library files should be copied to lt LabVIEW Dir gt User lib They include 6208 Ilb 7200 Ilb and 7230 Ilb If you dont find these files in the lt LabVIEW Dir gt User lib directory please copy them from the lt PCIS LVIEW Dir gt Lib directory 2 2 3 VEE Drivers PCIS VEE 95 step 1 Place the ADLINK All In One CD into the appropriate CD ROM drive step 2 If the Autorun setup program is not invoked automatically manually execute X Setup exe X indicates the CD ROM drive step 3 Select Software Package gt NuDAQ PCI Software gt PCIS VEE gt Win95 to setup PCIL VEE 95 When the installation process is completed the PCIS VEE 95 directory should contain the following files and sub directories FileSub directory Description Manual lt DIR gt PDF manual files Help lt DIR gt On line help file 7230 lt DIR gt 7248 lt DIR gt User objects and sample programs for 7250 lt DIR gt each card Windows 95 e 9 Windows 98 NT 2000 XP 3 1 Device Installation Windows 98 2000 XP and the PCl CompactPCl data acquisition cards work
23. he content of the pcidask conf is set out as shown below Configured Cards s ss ss sssssssss2s2s Card Type Cards Buffer Size Cunit pages 4KB page Al AQ DI Do PCI6208 1 Oo 9 9 9 PCI6308 2 Oo o 9 9 PCI7200 3 Oo o 9 9 PCI9114 1 4 9 9 9 32 e NUDAQ Configuration Utility Software Un Installation 6 1 Windows 95 98 NT 2000 XP All ADLINK Windows 95 98 NT 2000 XP software can be easily be uninstalled To un install a software open the Control Panel double click Add Remove Programs select the software you want to un install 6 2 Linux To remove PCIS DASK for Linux execute the Un installation script dask_remove pl in the pci dask util directory Then the script will remove the device nodes made in dev and the library copied into usr lib Software Un Installation e 33 Trouble Shooting A PCI card installation problem may occur under any of the following situations 1 BIOS Setting 2 BIOS Compatibility 3 Operating System Device Driver Installation 4 Operating System Compatibility 5 Software Library Installation 6 Hardware failure 34 e Trouble Shooting 7 1 PCI_SCAN Utility A software utility PCI_SCAN EXE is included in the ADLINK All In One CD to help you with diagnosing any PCI card installation problems It is located in the Utility PCI_SCAN DOS directory You can also download it from our web site http www adlink com tw This utility runs under a DOS system It is used for
24. ies not protected under our guarantees 40 e Warranty Policy 4 Customers are responsible for the fees regarding transportation of damaged products to our company or to the sales office 5 To ensure the speed and quality of product repair please download an RMA application form from our company website www adlinktech com Damaged products with RMA forms attached receive priority For further questions please contact our FAE staff ADLINK service adlinktech com Test amp Measurement Product Segment NuDAQ adlinktech com Automation Product Segment Automation adlinktech com Computer amp Communication Product Segment NuPRO adlinktech com NulPC adlinktech com Warranty Policy e 41
25. ink 7230 w95 If you want to install the PC 7230 DLL for Windows 95 in another directory select the Browse button to change the destination directory Then click the Next button to begin installing the PC 7230 DLL for Windows 95 Setup wll etal PLI 7230 DLL for Windows T5 in the Folioving rectory To fisted to thet deck chek Next To instal to a daen decoy cht Bross and select another rectory You can chose not to sted PCILTZ30 DLL far windon S by chching Carne to ext Zeg Windows 95 e 7 2 2 2 LabVIEW Driver PCIS LVIEW 95 step 1 Place the ADLINK All In One CD into the appropriate CD ROM drive step 2 If the Autorun setup program is not invoked automatically manually execute X Setup exe X indicates the CD ROM drive step 3 Select Software Package gt NuDAQ PCI Software gt PCIS LVIEW gt Win95 to setup the PCI LVIEW 95 Setup will automatically detect ihe LabVIEW directory and copy the Ladje jN S BI Gi z a3 necessary files to the K vi LabVIEW directory If you don t have LabVIEW installed on your system or your LabVIEW is of an older version earlier then version 5 0 mmm Jazznc Setup will display a Fiction Labview MY cancel dialog box for you to I Open as mea specify the LabVIEW directory Specify your LabVIEW directory and then click the OK button When the installation process is completed the PCIS LVIEW 95 directory should contain the following files and sub directori
26. interactive prompt at boot time a LILO LILO linux mem 60M b GRUB i Press a to modify the kernel arguments ii ro root dev hda1 mem 60M Step 3 DEVICE INSTALLATION Because of the architecture of the PCI bus the NuDAQ PCI devices can be detected automatically All the user has to do is insert the modules and make nodes for the devices You can do this manually or use the applets we provide e pci dask_xxx util dask_conf for driver configuration e pci dask_xxx drivers dask_inst pl for driver installation The dask_confcan configure the device drivers and save the devices information into pcidask conf Please refer to section 5 3 From the configuration file pcidask conf the installation script inserts the device modules configured before and the memory management module if required Then the script makes the device nodes according to the number of cards To start installation execute the script as follows lt InstallDir gt pci dask_xxx drivers dask_inst pl 24 e Linux Step 4 INSTALL LIBRARY The library is provided as a shared library for Linux To install the library type the following command cp libpci_dask so usr lib In addition dask_inst pl also involves the installation for the library Linux e 25 NuDAQ Configuration Utility The DAQ Configuration Utility PciUtil or D2kUtil is used to set modify the allocated buffer sizes for continuous Al AO DI and DO operations 5 1 Windows NT 4
27. ming DASK PAS or D2KDASK PAS for Delphi programming HELP lt DIR gt On line help file PDF manual files including User Guide MANUAL lt DIR gt and Function Reference Sample programs browser Examples exe SAMPLES lt DIR gt and various sub directories with sample programs of the cards Note ADLINK will periodically upgrade the PCIS DASK and D2K DASK to add support for new data acquisition cards Please refer to the Read Me file in the PCIS DASK D2K DASK folder for the current card types that the PC S DASK D2K DASK actually supports Windows 98 2000 XP After installing the PC S DASK D2k DASK the INF files and driver files are copied to its appropriate directories With the installed Device Information Files INF and Device Driver Files SYS Windows 98 2000 XP will be able to identify and initiate any data acquisition card automatically at system startup time Windows 98 NT 2000 XP e 15 Windows NT 4 0 After loading Windows NT and all the devices you wish to operate have been plugged into your computer make sure the PC S DASK D2K DASK device drivers corresponding to the cards are started For the PCIS DASK D2K DASK to be able to communicate with the DAQ cards the Garde own device driver e g PCI6208 PCI7200 DAQ2010 etc must be started You can check by opening the Control Panel double click Devices and a Devices window will be load as shown below tall If the device s
28. n ceceeeeeeeeeeeeeeeees 22 4 1 1 System Heouiremente AE 22 4 1 2 Install DCIGSDAGK N 22 Chapter 5 NUDAQ Configuration Unit 26 5 1 Windows NT 4 0 i eeccsccssscatceegiquacectenataateacdbad chee tdeeadanderneny 26 5 2 Windows 98 2000 XP c0ccceeesseeceeeaeeeeeeeaaeeeeeeaaeeeeees 28 5 3 BU 30 Chapter 6 Software Un Jnstallatnon 0 000000 2 33 6 1 Windows 95 98 NT 2000 XP ecceceseeeeeeeeneeeeeeaaeeeeees 33 6 2 BU E 33 Chapter 7 Trouble Ghootng AAA 34 7 1 RG SG ANEN deenen ce EE A aae 35 7 2 Windows 95 98 NT 2000 XP Trouble Shooting 36 Warranty Poly icici iascescicasivsttieteiwnicdanaderecneinetircacennanaancuatine 40 Table of Contents e i DOS 1 1 DOS Borland C and Microsoft C Library and Utility In the following sections the PC 7230 cPCI 7230 is used as an example to illustrate how to install the software utilities and drivers Installation procedures for other PCI cards are the same as the PCI 7230 Note The DAQ 2000 series does not have a DOS library 1 Place the ADLINK All In One CD into an appropriate CD ROM drive 2 If you re using a NUDAQ PCI card type the following commands at the DOS prompt LN indicates the CD ROM drive X gt CD NuDAQPCI XANuDAQPCI gt DOSSETUP If you re using a Compact PCI DAQ card then type the following commands at the DOS prompt Ac CD NulPC XANuIPC gt DOSSETUP DOS e The following user interfa
29. stered it will show in the Registered Drivers list Configured Cards Buffer Size Cunit pages 4KB page gt DI D0 CLOPCI6208 2 gt PCI6308 IPCIZ200 C4 PCI7230 5 PCI7233 C62PCI7234 FOPCI7248 99PCI7249 C9PCI7250 10 PCI7252 CL29PC1I7296 12 gt 9PC1I7432 139PCI7433 149PC17434 15 PC19111 Select the card type for configuration or or to exit To configure one of the PCIS DASK drivers type the number corresponding to the Card Type and a Driver Configuration screen appears PEPE DEDEIE IE DEDEDE IE DE IE IE HE HE IE IE HE DE IE IE HE DE IE IE HE DE IE IE DE DE IEE IE IE IE HE DE IE HE HE DE IE IE DE IE IE IE IE DE IE IE DE IE IE DEDEDE DE DEDEDE DEE DASK LINUX Configuration Utility HHH rE ENAERE ERENER ENERE ERENER ENER ENER ENER ENER EKER ENER DERE DEHHEDEH IEDM DEHIEDEH DERE IEHOHIEHIEI OH IERIE Card_Type PCI9111 How many PCI9111 adapters in your machine Memory pages for AI function 1 Hen base In this screen users can input the number of cards and the buffer size for continuous operation The buffer size is set on the memory page The PAGE_SIZE is four kilo byte per page The Memory Pages for the Al AO DI DO represent the page sizes of contiguous Initially Allocated memory for 30 e NuDAQ Configuration Utility continuous analog input analog output digital input digital output respectively The device driver will allocate the memory size from the memory management module After the device config
30. tatus is none you have to select the device and then press the Start button 16 Windows 98 NT 2000 XP 3 2 3 LabVIEW Driver PCIS LVIEW D2K LVIEW With the PCl cPCI series cards please use PCIS LVIEW and with the DAQ 2000 series cards please use the D2K LVIEW step 1 step 2 step 3 Note Setup wil Place ADLINK AFIn One CD into the appropriate CD ROM drive If the Autorun setup program is not invoked automatically manually execute X Setup exe X indicates the CD ROM drive PCI cPCI series Select Software Package gt NuDAQ PCI Software gt PCIS LVIEW gt Win98 NT 2000 XP _ to install PCIS LVIEW DAQ 2000 series Select Software Package gt DAQ 2000 Series Software gt D2kK LVIEW gt Win98 NT 2000 XP_ to install D2K LVIEW D2K LVIEW needs the D2K DASK software driver You must install the D2K DASK software driver before you re able to use the D2K LVIEW VIs automatically detect the LabVIEW directory and copy the necessary files to the LabVIEW directory If you don t have LabVIEW installed on your system or your LabVIEW is of an older version earlier then version 5 0 Setup will display a dialog box for you to specify the LabVIEW button directory Specify your LabVIEW directory and then click the OK Specify LabVIEW Path 24 x Look in E Nt D ol Cup labview exe File name labview exe Files of type LabVIEW Cancel T Open as read only Windows 98 NT 2000 XP
31. termine if the hardware device installation was successful you can open the Device Manager in Start gt gt Settings gt gt Control Panel gt gt System and then select the Device Manager tab Under Device Manager you should find the device under DAQ You can double click the device select the Resources tab and check if the I O port and IRQ resources for the device are allocated successfully Syprtem Properties BE Bacia Desie Mange Hadma Parias Fetcmares View devices bryos Vien devos by sonecon p D H J ADLnk PCI 7432 r ADLink PONZ Dik dives H Danay adape PE Flop dik contobers SC Had dk conticbers 2 Kobord F 1 Moitos mY Moure BP Nanak odos HF Pots CON amp LPT H System devices H Ureversal zmia be oordie Deeg Refresh Denge Frig m A Be Windows 95 2 2 Software Driver Installation 2 2 1 DLL Drivers step 1 Under Windows 95 place the ADLINK All In One CD into the appropriate CD ROM drive step 2 If the Autorun setup program is not invoked automatically manually execute X Setup exe X indicates the CD ROM drive step 3 Select Driver Installation gt NuDAQ PCI gt PCI 7230 gt Win95 to setup the PCI 7230 DLL for Windows 95 Setup frst displays a Welcome dialog box Click the Next button to continue with the installation Setup then displays the following dialog box for you to specify the destination directory The default path is CAADL
32. terrupt transfer can perform Unexpected errors will result if the DMA or Interrupt transfer exceeds the initially allocated size After the device NuDAQ PCI NulPC CompactPC NT Driver R EET ES configurations of the Eat driver you have This utility is used to make NuDAQ PCI selected are completed NulPC CompactPCI NT driver registry click the OK button to register the driver and Registered Drivers return to the main window The driver you Ketik _New _ just registered will be shown in the registered Modify drivers list as shown in the figure to the right Remove You can now exit the registration utility using Dore the EXIT command in NuDAQ Configuration Utility e 27 the menu bar or click the Done button To activate the registered drivers you need to restart your Windows NT system 5 2 Windows 98 2000 XP The main window of the DAQ Configuration utility PciUti or D2kUtil is shown below Driver Configuration EN Card Type Pcigt 12 D Buffer Allocated KB Al mmm KE D DR Fe Apply Cancel In this window users can select the driver they want to register and input the parameters in the box corresponding to the Al AO DI or DO for the requirement of your application The Buffer Allocated for Al AO DI DO represents the size of the contiguous Initially Allocated memory for continuous analog input analog output digital input digital output respectively Its unit
33. urations of the driver you have select is completed type Y to confirm the input data and return to the dask_confmain screen The driver you just registered will be shown in the registered drivers list as shown below Configured Cards Card Type Cards Buffer Size Cunit pages 4KB page gt DI D0 CLOPCI6208 2PCI6ZOS IPCI Z200 4 gt PC1I7230 5 PCI7233 COOPCI7234 FOPCI7248 CSOPCI7249 S gt PCI7250 10 PCI7252 C1L9PC1I7296 129PC1I7432 139PCI7433 149PC17434 159PC19141 Select the card type for configuration or 707 to exit To modify the configuration including number of cards and the buffer size select the driver and re configure the settings again Similarly if the number of cards is set to zero configuration for the selected driver will be removed NuDAQ Configuration Utility 31 HEH IEDEDE HE DEDEHE EHHH EEE DASK LINUX Configuration Utility HIE HEM IEDEDE HEHE DEDEDE MIE DEDEDE DEDEDE MIE DEDEDE IE DEDEDE DEDEDE IE DEDEDE EKEN ER EVEN ERSTEN EREKE ER ELENEN E EKEN ERENER ERI Card_Type PCI9141 How many PCI9111 adapters in your machine Memory pages for AI function 1 Mem_Page The setting for PCI9111 AIO Pages ADO Pages DIO Pages DOO Pages for PCI9111 Cards xx The Cards for PCI9111 is zero that will remove PCI9111 x xx From configuration list x are these correct Y N 7 _ When the configuration is completed the information of the devices will be saved to pci dask_xxx drivers pcidask conf T
34. ware gt D2K VEE gt Win98 NT 2000 XP to install D2K VEE Note D2K VEE needs the D2K DASK software driver You must install the D2K DASK software driver before you re able to use the D2K VEE user objects When the software component installation process has completed Setup will launch the NuDAQ PCI Configuration Utility PciUtil This utility is provided for configuring the card Refer to the NuDAQ PCI Configuration Utility section to learn how use this utility When the installation process is completed the PC S VEE directory should contain the following files and sub directories File Sub directory__ Description Samples lt DIR gt Sample programs Util lt DIR gt DAQ Configuration utilit Manual lt DIR gt PDF manual files Help lt DIR gt On line help file PCIS VEE only Windows 98 2000 XP After installing the PCIS VEE D2K VEE the INF files and driver files are copied to its appropriate directories With the installed Device Information Files INF and Device Driver Files SYS Windows 98 2000 XP will be able to identify and initiate any data acquisition card automatically at system startup time 20 e Windows 98 NT 2000 XP Windows NT 4 0 After loading Windows NT and all the devices you wish to operate have been plugged into your computer make sure the PC S DASK D2K DASK device drivers corresponding to the cards are started For the PCIS DASK D2K DASK to be able to communicate with the DAQ cards the
35. y Microsoft C Library Samples and Utility Install directory C ADLINK The installation process is then completed you can now press the Esc key to exit After the installation all the files of the card that you selected will be stored in the installation directory DOS e 3 Windows 95 2 1 Device Installation Windows 95 and the NuDAQ NuIPC data acquisition cards work very well together because of Windows 95 includes Plug and Play capabilities Note The DAQ 2000 series does not have a Windows 95 library Once Windows 95 has started the Plug and Play functions of Windows 95 will find and locate the new NuDAQ NuIPC cards If this is the first time Windows 95 has operated with the installed NuDAQ NulPC cards Windows 95 will prompt for the device information source Update Device Driver Wizard This wizard will complete the installation of PCI Card by searching your local drives network and Internet locations for the most current driver If you have a disk or CD ROM that came with this device insert it now It is recommended that you let Windows search for an updated driver To do this click Next to continue 4 e Windows 95 Click the Next button to continue with the driver Update Device Driver Wizard installation for the device The system will initially search the device driver information on FDD A After it fails to load the device information from drive A the following win
Download Pdf Manuals
Related Search