ELATION DW FRESNEL - USER MANUAL VERSION 1
Contents
1. DW FRESNEL User manual PROFESSIONAL ETATION www elationlighting com 2015 ELATION PROFESSIONAL all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ELATION PROFESSIONAL logo and identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged All non ELATION brands and product names are trademarks or registered trademarks of their resoective companies ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indirect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe insufficient and negligent assembly installation rigging and operation of this product Elation Professional USA 6122 S Eastern Ave Los Angeles CA 90040 323 582 3322 323 832 9142 fax www elationlighting com info elationlighting com Elation Professional B V Junostraat 2 6468 EW Kerkrade Netherlands 31 45 546 85 66 31 452. Specifications are subject to change without any prior written notice MODE CHANNEL VALUE FUNCTION acn sen e O 0 255 Cool White 0 Black 255 100 Cool White 0 255 Warm White 0 Black 255 100 Warm White COLOR TEIVPERATURE 1 1 255 Color Temperature 1 3 200K 255 6 000k SC OLOR TEMPERATURE 2 pT NOFUNCTION o suter STROBE 5 3 DIMMER INTENSITY 0 255 Intensity 0 to 100 0 255 FINE Intensity O to 100 128 170 ARCHITECTURAL 171 213 THEATRE ONT 42 84 STAGE 214 255 Default to Unit Dimming Curve Setting 25 DW FRESNEL User Manual Ver 1 www elationlighting com CLEANING AND MAINTENANCE C A U T O N Disconnect power before cleaning or maintenance CLEANING Frequent cleaning is recommended to insure proper function optimized light output and an extended life The frequency of cleaning depends on the environment in which the fixture operates damp smoky or particularly dirty environments can cause greater accumulation of dirt on the fixture s optics e Clean the external lens surface at least every 20 days with a soft cloth to avoid dirt debris accumulation e Never use alcohol solvents or ammonia based cleaners MAINTENANCE Regular inspections are recommended to insure proper function and extended life There are no user serviceable parts inside this fixture please refer all other service issues to an authorized Elation service technician Should you need
3. 546 85 96 fax www elationlighting eu info elationlighting eu DOCUMENT VERSION IE Please check www elationlighting com for the latest revision update of this manual D t Soft ai ocument sorware Channel Modes Version Version 01 2015 2138 Initial release 2 DW FRESNEL User Manual Ver I www elationlighting com CONTENTS waren o ss i TO Fixture Overview Fixture Installation jenta Barn Door And Gel Frame Installation Understanding DMX DMX Channel Functions And Values Cleaning and Maintenance Technical Specifications 2 9 Optional Accessories 2 3 DW FRESNEL User Manual Ver 1 www elationlighting com GENERAL INFORMATION INTRODUCTION Congratulations you have just purchased one of the most innovative and reliable lighting fixtures on the market today The DW FRESNEL has been designed to perform reliably for years when the guidelines in this booklet are followed Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit These instructions contain important information regarding safety during use and maintenance UNPACKING Thank you for purchasing the DW FRESNEL by Elation Professionale Every DW FRESNEL has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be dama
4. I www elationlighting com FIXTURE OVERVIEW a7 NG a i QM OD OOOM a LILLE 1 LCD Menu Function Display 10 Spin DMX OUT 2 UP Button 11 5pin DMX IN 3 DOWN Button 12 Safety Cable Eyelet 4 MODE ESC Button 13 powerCON IN 5 ENTER Button 14 Fuse 6 Color Temperature Dial 15 Power Switch 7 Dimmer Dial 16 Yoke 8 3pin DMX OUT 17 Barn Doors 9 3pin DMX IN 18 Zoom Dial 9 DW FRESNEL User Manual Ver I www elationlighting com FIXTURE INSTALLATION FLAMMABLE MATERIAL WARNING Keep fixture at least 5 0 ff 1 5m away from any flammable materials decorations pyrotechnics etc ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and or installations ISP CAUTIONS For added protection mount the fixture in areas outside walking paths seating areas or in areas were unauthorized personnel might reach the fixture Ambient operating temperature range for this fixture is 14 to 113 F 10 to 45 C Do not use the fixture under or above this temperature Before mounting the fixture to any surface make sure the installation area can hold a minimum point load of 10 times the weight of the fixture 240 Ibs 109 kg Fixture installation must always be secured with a secondary safety attachment such as an appropriate safety cable Never stand directly below the device when mounting removing or servicing 10 DW FRE
5. Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Part 1 Part 2 Part 3 Part 1 Part 2 Part 3 Part 1 Part 2 Part 3 The slave unit receives data from the Master unit according to the group which the Slave unit was assigned to If e g a Slave unit is set to Slavel in the menu SetSlave the Master unit sends ProPart 1 to the Slave unit If set to Slave2 the Slave unit receives ProPart 2 To start an Auto Program proceed as follows 1 Slave Setting e Select FuncMode e Press ENTER to confirm e Select SetSlave e Press ENTER to confirm e Select Slavel Slave2 or Slave3 e Press ENTER to confirm e Press MODE ESC in order to return to the main menu 2 Automatic Program Run e Select FuncMode e Press ENTER to confirm e Select AutoProg e Press ENTER to confirm e Select Master or Alone e Press ENTER to confirm e Press MODE ESC in order to return to the main menu 22 DW FRESNEL User Manual Ver 1 ETATION www elationliahtina m ATIO e O g eee EditProg RecCntrl Working With Built In Program continued 3 Program Selection for Automatic Program Run e Select EditProg e Press ENTER to confirm e Select Sel Progm e Press ENTER to confirm e Select ProPart 1 ProPart 2 or ProPart 3 and select which Slave program is to be sent Selection Part 1 means the Slave unit runs the same pr
6. date of purchase This warranty excludes discharge lamps and all product accessories This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service send the product only to the Elation Professional factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty Elation Professional will pay return shipping charges only to a designated point within the United States If any product is sent it must be shipped in its original package and packaging material No accessories should be shipped with the product If any accessories are shipped with the product Elation Professional shall have no liability what so ever for loss and or or damage to any such accessories nor for the safe return thereof C This warranty is void if the product serial number and or labels are altered or removed if the product is modified in any manner which Elation Professional concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the Elation Professional factory unless prior written authorization was issued to purchaser by Elation Professional if the product is damaged because
7. hanging bracket as illustrated above Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle 12 DW FRESNEL User Manual Ver I www elationlighting com BARN DOOR AND FROST FILTER The DW FRESNEL Barn Door and the Frost Filter Gel Frame Assembly are preinstalled for your convenience Should you have a need to remove the assembly for any reason it can be removed by loosening the 4 M4 screws as indicated below GEL FRAME REMOVAL AND INSTALLATION The preinstalled Gel Frame comes with a standard Frost Filter The Gel Frame can be removed from the Barn Door Assembly if it s not needed and or to install a different type of gel TO REMOVE the Gel Frame unhook the locking tab and slide it out away from the Barn Door Assembly TO INSTALL the Gel Frame slide it into the Barn Door Assembly and hook the locking tab in place LOCKING TAB 13 DW FRESNEL User Manual Ver I www elationlighting com UNDERSTANDING DMX DMX 512 DMX is short for Digital Multiplex This is a universal protocol used by most lighting and controller manufactures as a form of Communication between intelligent fixtures and controllers DMX allows all makes and models of different manufactures to be linked together and operate from a single controller This is possible as long as all the fixtures and the controller are DMX compliant A DMX controller sends the DMX data instructions to t
8. not properly maintained as set forth in the product instructions guidelines and or user manual D This is not a service contract and this warranty does not include any maintenance cleaning or periodic check up During the periods as specified above Elation Professiondl will replace defective parts at its expense and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of Elation Professional under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of Elation Professional All products covered by this warranty were manufactured after January 1 1990 and bare identifying marks to that effect E Elation Professional reserves the right to make changes in design and or performance improvements upon its products without any obligation to include these changes in any products theretofore manufactured F No warranty whether expressed or implied is given or made with respect to any accessory supplied with the products described above Except to the extent prohibited by applicable law all implied warranties made by Elation Professional in connection with this product including warranties of merchantability or fitness are limited in duration to the warranty periods set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall a
9. or not must be freight pre paid and accompany a return authorization R A number The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A number must also be written down on a piece of paper and included in the shipping container If the unit is under warranty you must provide a copy of your proof of purchase invoice Items returned without a R A number clearly marked on the outside of the package will be refused and returned at customer s expense You may obtain a R A number by contacting Customer support IMPORTANT NOTICE 2 There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty Damages resulting from modifications to this fixture and or the disregard of safety and general user instructions found in this user manual void the manufactures warranty and are not subject fo any warranty claims and or repairs 5 DW FRESNEL User Manual Ver I ETATION www elationlighting com mi 9 9 LIMITED WARRANTY A Elation Professional hereby warrants to the original purchaser Elation Professional products to be free of manufacturing defects in material and workmanship for a period of two years 730 days and Elation Professional product rechargeable batteries to be free of manufacturing defects in material and workmanship for a period of six months 180 days from the original
10. the heat associated with the lamp and will decrease gradually over time This fixture is a professional lighting effect designed for INDOOR DRY LOCATIONS ONLY on stage in nightclubs theatres etc Please make sure there are NO FLAMMABLE MATERIALS close to the fixture while operating to prevent any fire hazard The fixture must be installed in a location with adequate ventilation at least 1 5 feet 5m from adjacent surfaces Be sure no air ventilation slots are blocked DO NOT attempt installation and or operation without knowledge how to do so DO NOT permit operation by persons who are not qualified to operate this type of fixture Most damages are the result of operations by nonprofessionals Consistent operational breaks may ensure the fixture will function properly for many years to come DO NOT shake fixture avoid brute force when installing and or operating fixture Always install the fixture with an appropriate safety cable When installing the fixture in a suspended environment always use mounting hardware that is no less than M10 x 25 mm also be sure the hardware is insert in the pre arranged screw holes in the bracket of the fixture Use the original packaging and materials to transport the fixture in for service DO NOT TOUCH the housing bare hand during its operation Turn OFF the power and allow approximately 15 minutes for the fixture to cool down before replacing or serving 8 DW FRESNEL User Manual Ver
11. SNEL User Manual Ver I www elationlighting com MOUNTING POINTS e Overhead mounting requires extensive experience including amongst others calculating working load limits installation material being used and periodic safety inspection of all installation material and the device If you lack these qualifications do not attempt the installation yourself Improper installation can result in bodily injury e Fixture is fully operational in the specific mounting positions as illustrated below DE ee ee ee Qe ee ee En TF dn EEE een G GS kal ikk db T KE NESE DEE en ee ee eee fer SAFETY CABLE Always use a Safety Cable whenever installing this fixture in a suspended environment to ensure the fixture will not drop if the clamp fails 11 DW FRESNEL User Manual Ver 1 www elationlighting com CLAMP MOUNTING The DW FRESNEL includes an adjustable mounting yoke and safety cable rigging point attached to the fixture see the illustration below When mounting this fixture to truss be sure to secure an appropriately rated clamp not included to the yoke using an M10 screw fitted through the center hole of the clamp Be sure to attach the included Safety Cable to the fixture using the safety cable rigging point SECURING Regardless of the rigging option you choose for your DW FRESNEL always be sure to secure your fixture with a safety cable The fixture provides a built in rigging point for a safety cable on the
12. a True signal Pin3 Not Used 1 Ping Do Not Use Not Used Pin 5 Do Not Use 16 DW FRESNEL User Manual Ver 1 www elationlighting com DMX ADDRESSING All fixtures should be given a DMX starting address when using a DMX controller so the correct fixture resoonds to the correct control signal This digital starting address is the channel number from which the fixture starts to listen to the digital control information sent out from the DMX controller The allocation of this starting DMX address is achieved by setting the correct DMX address on the digital display located on the back of the fixture You can set the same starting address for all fixtures or a group of fixtures or set different address for each individual fixture Be advised that setting all fixtures to the same DMX address will subsequently control all fixtures in the same fashion in other words changing the settings of one channel will affect all the fixtures simultaneously If you set each fixture to a different DMX address each unit will start to listen to the channel number you have set based on the quantity of control channels DMX channels of each fixture That means changing the settings of one channel will only affect the selected fixture In the case of the DW FRESNEL when in the 8 Channel Mode you should set the starting DMX address of the first unit to 1 the second unit to 9 1 8 the third unit to 17 9 8 and so on Note D
13. any spare parts please order genuine parts from your local Elation dealer Please refer to the following points during routine inspections e A detailed electric check by an approved electrical engineer every three months to make sure the circuit contacts are in good condition and prevent overheating e Be sure all screws and fasteners are securely tightened at all times Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall e Check for any deformations on the housing color lenses rigging hardware and rigging points ceiling suspension trussing Deformations in the housing could allow for dust to enter into the fixture Damaged rigging points or unsecured rigging could cause the fixture to fall and seriously injure a person s e Electric power supply cables must not show any damage material fatigue or sediments Never remove the ground prong from the power cable 26 DW FRESNEL User Manual Ver I ETATION www elationlighting com TECHNICAL SPECIFICATIONS FEATURES 13 41 Manual Zoom Variable Color Temperature 3 200 6 000K No Noise Thermo Optical Cooling Technology Manual and DMX Controlled Color Temp and Dimming Flicker FREE Operation for TV and FILM Rotating Barn Door Gel Frame and Frost Filter SOURCE 250W Dynamic White LED Engine 100 000 Hour Average Life EFFECTS Variable Strobe Settings 1 18 fps Electronic Dimming 0 100 Variable Dimming C
14. efine how fixture displays internal temperature Celsius or Fahrenheit Persnal ResetDef When ON all factory settings are restored ManCnitrl ManCnirl Adjust functions manually Mode Set UserMode select DMX channel modes Dimming DimModes select dimming modes Standar Stage TV Archite Theatre 100 a 50 Ramp Effect s fe 1180 EditProg Sel Prog select one of the 10 user defined internal Auto Programs EditProg EditProg Edit any of the 10 user defined internal Auto Programs EditProg EditScen Edit any of the 250 scenes of the internal Auto Programs www elationlighting com 2 DW FRESNEL User Manual Ver I ETATION www elationliahting com mi 9 9 EditProg RecCntirl The fixture features an integrated DMX recorder by which you can transmit the programmed scenes from your DMX controller to the moving head Adjust the desired scene numbers via the encoder from to When you call up the scenes at your controller they will automatically be transmitted to the moving head EditProg RecCnirl Working With Built In Programs A Master unit can send up to 3 different data groups to the Slave units i e a Master unit can start 3 different Slave units which run 3 different programs The Master unit sends the 3 program parts in a continuous loop Auto Pro Auto Pro Auto
15. escribed in this manual Only qualified and certified personnel should perform installation of this fixture and only the original rigging parts brackets included with this fixture should be used for installation Any modifications will void the original manufactures warranty and increase the risk of damage and or personal injury e Never look directly into the light source of this fixture to prevent risk of injury to your retina which may induce blindness Those suffering from EPILEPSY should avoid looking directly into the light source of this unit at all times e The fan and air inlets must remain clean and never blocked Allow approx 6 15cm between this fixture and other devices or a wall for proper cooling e Always disconnect from main power source before performing any type of service and or cleaning procedure Only handle the power cord by the plug end never pull out the plug by tugging the wire portion of the cord e Do not operate this fixture if the power cord has become frayed crimped and or damaged If the power cord is damaged replace it immediately with a new one of similar power rating 7 DW FRESNEL User Manual Ver 1 www elationlighting com GENERAL GUIDELINES NEVER OPEN THIS FIXTURE WHILE IN USE During the initial operation of this fixture a light smoke or smell may emit from the interior of the fixture This is a normal process and is caused by excess paint in the interior of the casing burning off from
16. ged carefully insoect your unit for damage and be sure all accessories necessary to operate the unit have arrived intact In the event damage has been found or parts are missing please contact our customer support team for further instructions Please do not return this unit to your dealer without first contacting Customer support at the number listed below Please do not discard the shipping carton in the trash Please recycle whenever possible BOX CONTENTS e 1 set Rotating Barn Door Gel Frame Frost Filter e 1 3pin DMX Cable e 1 powerCON Cable e 3 Safety Cables e Manual amp Warranty Card 4 DW FRESNEL User Manual Ver I www elationlighting com CUSTOMER SUPPORT Elation Professionale provides a customer support line to provide set up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www elationlighting com for any comments or suggestions For service related issue please contact Elation Professional ELATION SERVICE USA Monday Friday 8 00am to 5 00pm PST Voice 323 582 3322 Fax 323 832 9142 E mail support elationlighting com ELATION SERVICE EUROPE Monday Friday 08 30 to 17 00 CET Voice 31 45 546 85 30 Fax 31 45 546 85 96 E mail support elationlighting eu WARRANTY REGISTRATION Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty
17. he fixture allowing the user to control the different aspects of an intelligent light DMX data is sent out as serial data that travels from fixture to fixture via data IN and data OUT XLR terminals located on the fixtures most controllers will only have output jacks DMX LINKING To ensure proper DMX data transmission always use proper DMX cables and a terminator When using several DMX fixtures try to use the shortest cable path possible Never split a DMX line with a Y style connector The order in which the fixtures are connected in a DMX line does not influence the DMX addressing For example a fixture assigned a starting DMX address of I may be placed anywhere in the DMX chain at the beginning at the end or anywhere in the middle The DMX controller knows to send data assigned to address to that fixture no matter where it is located in the DMX chain The DW FRESNEL can be controlled via DMX 512 protocol and the DMX address is set via the control menu DATA CABLE DMX Cable REQUIREMENTS For DMX and Master Slave Operation Your fixture and your DMX controller require a standard 3pin or Spin XLR connector for data inout and data output see figure below If you are making your own cables be sure to use two conductor shielded digital DMX cable rated at 120 ohms this cable is designed for DMX transmission and may be purchased from your Elation dealer or at most professional lighting retailers Your cables should be
18. here are 3 manual knobs which can be used to control ZOOM IN ZOOM OUT COLOR TEMPERATURE and DIMMER see image below ZOOM IN ErAT10N DW Fresnel r efel Kolti 18 DW FRESNEL User Manual Ver I ETATION www elationlightino m eg O 9 g CO ELATIONO DW FRESNEL SYSTEM MENU Specifications are subject to change without any prior written notice MAIN MENU SUBMENU OPTIONS VALUES Default Settings in BOLD DESCRIPTION Address AG timento Info Soft Ver on Cool Cool xxx MancCntrl ManCntri Adjust Functions Manually DiMo DiMo xxx Mode Set 2CH 3CH 8CH DMX Channel Modes Standar Stage TV Archite Theatre Dimming Modes ProPart1 Program 1 10 Program 1 Sel Prog ProPart2 Program 1 10 Program 2 Select Programs To Be Run ProPart3 Program 1 10 Program 3 Proglest TO1SCxxx Testing Program Prog EdStep 01 EditProg SO1SCxxx Program In Loop EditProg Prog 10 EdStep 64 SHASCXXX Save and Exit Cool Cool xxx n scones save and Automatically Return EditScen InByOut Manual Scenes Edit Scene 250 Time xx xXS RecCntrl XX XX Automatic Scenes Recorder FuncMode Address Define desired DMX address via the Control Panel FuncMode ValuDisp Display DMX 512 value of each channel FuncMode SetSlave Define fixture slave mode Slavel Slave2 Slave3 19 DW FRESNEL User Manual Ver I www elationlighting com FuncMode A
19. made with a male and female XLR connector on either end of the cable Also remember that a DMX line must be daisy chained and cannot be split unless using an approved DMX splitter such as Elation s Opto Branch 4 Opto Branch 8 or DMX Branch 4 14 DW FRESNEL User Manual Ver 1 www elationlighting com DMX Output DMX Input DMX Output DMX Input 3 Pin XLR Socket 3 Pin XLR Socket 5 Pin XLR Socket 5 Pin XLR Socket 1 Ground 1 Ground 2 Data 2 Data 3 Data 3 Data 4 Open 5 Open Be sure to follow the above figure when making your own cables Do not use the ground lug on the XLR connector Do not connect the cable s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR outer casing Grounding the shield could cause a short circuit and erratic behavior DMX 512 CONTROLLER CONNECTION Connect the provided XLR cable to the female XLR output of your controller and the other side to the male XLR input of the DW FRESNEL The diagram below illustrates a typical DMX 512 connection when the fixture is in the 8 Channel Mode You can chain multiple panels together through serial linking The cable that should be used is two conductor shielded DMX cable with XLR input and output connectors Always be sure daisy chain your in and out data connections never split or Y your DMX connections unless you are using an approved DMX splitter such as Elation
20. o change without any prior written notice 28 DW FRESNELT User Manual Ver 1 www elationlighting com DIMENSIONAL DRAWINGS 15 4 17 8 391mm 453mm 11 6 295mm 8 0 204mm 252mm Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice OPTIONAL ACCESSORIES Of Gm Spin PRO DNX Cable 501 18m S n PRO DMX Gabi Of Gm Spin PRO DMX Cable ACSPDMX25PRO 25 ft 7 5m Spin PRO DMX Cable ACSPDMX50PRO 50 ft 15 2m Spin PRO DMX Cable 29 DW FRESNEL User Manual Ver 1
21. ogram as the master units e Press ENTER to confirm e Press MODE ESC in order to return to the main menu 4 Program Selection for Edit Program e Select EditProg e Press ENTER to confirm e Select EditProg e Press ENTER to confirm e Select the desired program to edit specific scenes into a specific program e Press ENTER to confirm e Press MODE ESC in order to return to the main menu 5 Automatic Scene Recording e Select EditProg e Press ENTER to confirm e Select EditScen e Select desired scene numbers A maximum of 250 scenes can be programmed e Press ENTER to confirm e Press MODE ESC in order to return to the main menu 23 DW FRESNEL User Manual Ver I ETATION www elationliahting com mi 9 9 EditProg RecCnirl Working With Built In Program continued Example Program 2 includes scenes 10 11 12 amp 13 Program 4 includes scenes 8 9 amp 10 Program 6 includes scenes 12 13 14 amp 15 Auto Pro Part I is Program 2 Auto Pro Part 2 is Program 3 Auto Pro Part 3 is Program 6 The 3 Slave groups run the Auto Program in certain time segments as shown in the following picture Part 1 of sem semen same semen Part 2 ne sens sem se Part 3 i i i 24 DW FRESNEL User Manual Ver 1 ETATION www elationlighting com min 9 9 DMX CHANNEL FUNCTIONS AND VALUES ELATION DW FRESNEL DMX Channel Values Functions 8 DMX Channels
22. pply to this product after said periods have expired The consumer s and or dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall Elation Professional be liable for any loss and or damage direct and or consequential arising out of the use of and or the inability to use this product G This warranty is the only written warranty applicable to Elation Professional products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published 6 DW FRESNEL User Manual Ver I www elationlighting com SAFETY INSTRUCTIONS The DW FRESNEL is an extremely sophisticated piece of electronic equipment To guarantee a smooth operation it is important to follow the guidelines in this manual The manufacturer of this device will not accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual This device falls under PROTECTION CLASS 1 It s essential this device be grounded properly Only qualified personnel should perform all electrical connections KEEP THIS FIXTURE AWAY FROM RAIN AND MOISTURE UNPLUG POWER BEFORE SERVICING FIXTURE NEVER TOUCH FIXTURE DURING OPERATION AS IT MAY BE HOT NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE SENSITIVE PERSONS MAY SUFFER AN EPILETIC SHOCK e For proper operation follow the Installation guidelines d
23. s Opto Branch 4 Opto Branch 8 or DMX Branch 4 DMX controller lt gt DMX512 Address 17 Address 9 Address I 15 DW FRESNEL User Manual Ver 1 www elationlighting com DMX 512 CONNECTION WITH DMX TERMINATOR A DMX terminator should be used in all DMX lines especially in longer runs The use of a terminator may avoid erratic behavior in your DMX line A terminator is a 120 ohm 1 4 watt resistor that is connected between pins 2 and 3 of a male XLR connector DATA and DATA This fixture is inserted in the female XLR connector of the last fixture in your daisy chain to terminate the line Using a line terminator will decrease the possibilities of erratic behavior r Termination reduces signal errors and avoids signal transmission problems iil and interference It is always advisable to connect a DMX terminal Resistance f N 120 Ohm 1 4 W between PIN 2 DMX Nans and PIN 3 DMX of the last fixture PIN2 5pin XLR DMX CONNECTORS Some manufactures use 5pin XLR Connectors for DATA transmission in place of 3pin Spin XLR fixtures may be implemented in a 3pin XLR DMX line When inserting standard Spin XLR connectors in to a 3pin line a cable adaptor must be used these adaptors are readily available at most electric stores The following chart details a proper cable conversion 3 Pin XLR to 5 Pin XLR Conversion Conductor 3 Pin XLR Female Out 5 Pin XLR Male In Data Compliment signal Pin2 Dat
24. uring start up the DW FRESNEL will automatically detect whether a DMX data signal is being received or not If the fixture is not receiving a DMX signal please check the following The 3pin or Spin XLR input plug cable with DMX signal from controller is not connected or is not inserted completely into the DMX input jack of the fixture The DMX controller is switched off or defective The DMX cable or connector is defective A DMX terminator has been inserted into the last fixture in your DMX chain 17 DW FRESNEL User Manual Ver 1 www elationlighting com FIXTURE MENU ON BOARD SYSTEM MENU The DW FRESNEL comes with an easy to navigate system menu The next section will detail the functions of each command in the system menu LCD MENU CONTROL PANEL The control panel see image below located on the fixture allows you to access the main menu and make all necessary adjustments to the DW FRESNEL During normal operation pressing MODE ESC button once will access the fixture s main menu Once in the main menu you can navigate through the different functions and access the sub menus with the UP and DOWN buttons Once you reach a field that requires adjusting press the ENTER button to activate that field and use the UP and DOWN buttons to adjust the field Pressing the ENTER button once more will confirm your setting You may exit the main menu at any time without making any adjustments by pressing the MODE ESC button T
25. urves CONTROL CONNECTIONS 4 Button and 3 Dial Control Panel LCD Menu Display Manual or DMX Controlled Color Temp and Dimming 3 DMX Channels Modes 2 3 8 3 and 5 pin DMX In Out powerC ON Power In SIZE WEIGHT Length 23 4 595 mm Width 10 4 264 mm Height 17 8 453 mm Weight 24 0 Ibs 10 9 kg ELECTRICAL THERMAL AC 100 240V 50 60Hz 320W Max Power Consumption 14 to 113 F 10 to 45 C APPROVALS RATINGS CE cETLus IP20 lb LISTED Intertek Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 27 DW FRESNEL User Manual Ver I www elationlighting com PHOTOMETRIC DATA se EG Er di FG i N n el 13 19 pe ae hain Field ar ICE p 3 j 2 5m a A ad mm sm EE a 7 5m MIN ZOOM as ft ft ft Distance 5 16 4 73 24 6 13 Beam Diameter 0 55 18 11 38 16 54 19 Field Diameter 255 84 Photometrics fo lux fo lux fo FULL ON 28 520 2 65 327 COOL WHITE 15 960 1 483 2 029 1 504 WARM WHITE 12 730 1 183 MAX ZOOM mn tt m Distance 1 3 3 41 Beam Diameter 1 86 ol 72 Field Diameter 3 6 11 8 _ 10 8 35 4 Photometrics lux fc fc fc FULL ON CooL wuite 1 550 219 20 WARM WHITE 174 16 Please Note Specifications and improvements in the design of this unit and this manual are subject t
26. utoProg Define fixture mode Master or Alone for running Auto Programs Select desired internal programs under Select Program set the number of steps under Edit Program and edit individual scenes under Edit Scenes Info Timelnfo Cur Time Displays fixture run time from last power ON The counter is reset after each time the fixture is powered OFF Info Timelnfo TotalHrs Displays fixture total run time Info Timelnfo Last Hrs Displays fixture run time for a given period of time i e rental period This counter can be reset Info Timelnfo TimePass Displays timer password 038 Info Timelnfo Clr Last Clear fixture last run time Time can only be cleared after the timer password is entered Info Tempinfo HeadTemp Displays temperature of the fixture Info Soft Ver Displays software version of the fixture Persnal Stat Set Addr DMX Define desired DMX address via an external controller Persnal Stat Set NoDMXSta Define how fixture operates if NO DMX signal is detected Persnal Disp Set Off Time Define how many minutes before the LCD Menu display will automatically shut OFF Persnal Disp Set Key Lock When ON Control Panel buttons lock automatically after exiting main menu for 15 seconds To unlock keeo MODE ESC button pressed for 3 seconds 20 DW FRESNEL User Manual Ver 1 Persnal Temp C F D
Download Pdf Manuals
Related Search