View Instructions for 804-14
Contents
1. River City Cuckoo Clocks L L C Clock Care and Setup Instructions Congratulations on purchasing a River City Cuckoo Clock We are confident that this original Black Forest Cuckoo Clock will add character and charm to your home and that you and your family will be rewarded with a lifetime of pleasurable memories With proper care and maintenance your new clock will last a lifetime This brochure should answer most of your questions on its proper setup To avoid uh oh and unnecessary frustration please review the diagrams and read the unpacking and hanging instructions once before unpacking your new treasure Then follow the steps once and hang your clock Cuckoo Clock Rear View amp Parts headboard d clock a hole jor hanging clock FS bellows and removable clips silen weights attach A to hooks gong wire and paper UNPACKING AND HANGING INSTRUCTIONS 1 Gently unpack your clock a locating the pendulum b weights c and headboard d Your clock may or may not have a headboard and it may have two or three weights depending on the model Be sure to save the original box and packing material for future use 2 Place the clock face down Open the back of the clock by turning the small metal latch 2a Remove the back panel and pull the paper out from behind the spiral gong wire on the inside of the back panel 2b 3 Gently slide out the tw2. clock 7a Then attach the weights to the hook ends of the chains 7b 8 Now mount the headboard if there is one Pull free chains down carefully towind Operating Instructions 1 Silent Lever Most River City Cuckoo clocks have a silent lever on the side or bottom of the case o Place the lever in the on position if you want your clock to cucko and play music on models so equipped In the silent or off both cuckoo and music Avoid placing the le s the cuckoo is sound ing you may however move the lever to on at any time pendulum hanger silent lever side or bottom paper packet securing chains 2 Start the clock and place it in beat Gently swing the pendulum to one side to start its momentum and initiate the clock s ticking Listen carefully if the ticking lacks a perfect or regular rhythm your clock will run for only a few minutes and then stop Swing the base of the clock a little to the left or right un til the ticking is even Many owners place a faint pencil mark on the wall along one side of the clock This can be used to reposition the clock if it is accidentally moved 3 Set the time by moving the long hand minute hand clockwise or counter clockwise If the short hand hour hand is accidentally moved out of place the hour indicated by the hour hand will disagree with the cuckoo count You can gently hold the ho
3. e of wire pipe cleaner or twist tie through the chain links as close to the base of the clock as possible as in the original packaging The loose chain ends can then be placed in a bag or wrapped in paper to keep them from becoming entangled in the mechanisms Pack the clock securely in its original box or a sturdy box large enough to al low for packing material such as bubble wrap to protect the carvings Avoid use of packing material which may crumble and allow small debris to contaminate the mechanism Seal the box and place it in a larger sturdy box using packing material to secure the smaller box with the larger one If returning your clock to a clock service center for repairs send the clock without the weights and headboard Enclose a note indicating the number stamped on your weights i e 275 320 375 420 1260 1500 or 1750 Wooden weights may not be numbered Please indicate the nature of the problem and the address to Which the clock should be returned Be sure to insure your clock for its proper value and if the repair is covered under your warranty enclose a copy of your sales receipt RIVER CITY CUCKOO CLOCK TWO YEAR WARRANTY Your River City Cuckoo Clock is warranted to be free from defects in materials and workmanship for a period of two years Our obli gation under this warranty is limited to the repair or replacement of the defective clock without charge This warranty applies to the original consumer and
4. is not transfer able Please enclose a copy of the sales receipt Warranty service is available by returning the clock postage pre paid along with a check in the amount of 14 75 made payable to RIVER CITY SERVICE CENTER for return postage and handling Please pack your cuckoo clock for shipping as detailed on p 7 of this booklet and allow 4 6 weeks for warranty repairs The following situations are not covered under this warranty 1 Damage sustained while in transit or through misuse and or abuse Chains off the wheels or tangled Any problems caused by not following the instructions in the instruction brochure packed with your clock Repairs done by anyone other than an authorized RIVER CITY SERVICE CENTER RETURN FOR SERVICE INFORMATION It is suggested you insure the clock to cover any damage that may occur during shipment Include your check for 14 75 for return shipping and handling along with a note including your name phone number return shipping address and nature of defect Please allow 4 6 weeks for warranty repairs Ship clock to RIVER CITY SERVICE CENTER 3640 SCARLET OAK BLVD ST LOUIS MO 63122
5. k side of the pendulum stick with a pencil indicating the position of the carving on the stick If the carving is accidentally moved you can easily replace it to its correct position REPAIRS Servicing should always be done by a professional clock repairman PACKING YOUR CLOCK FOR SHIPMEN Unhook weights and pendulum wind chains so that the brass hooks return to the bottom of the clock case Move the wire latch to lock the cuckoo door Open the back panel and place bellow clips on bellows see diagram on p 2 If you cannot locate original bellow clips fashion a substitute with paper clips to keep the bellows closed and prevent damage during transportation Place a strip of paper through the spiral gong wire located on the inside back panel see diagram to keep it silent during shipping Secure chains to keep them on the sprocket wheel and avoid tangling within the clock mechanism A simple way to secure the chains is to extend them to their full length and wrap them carefully around the outside of the clock Be sure there is no pressure on delicate carvings waterwheels or other moving parts however Then to keep tension on the chains attach a rubber band to each of the round brass washers on the ends of the chains and hook the other ends of the rubber bands to the clock to keep the chains taut Another effective method of securing the chains and keeping them on the sprocket wheel is to insert a straight piec
6. o bellow clips 3a 3b at the upper inside of the clock and save them with the original packing material Replace the back panel 4 Tum the clock onto its backside Push aside the wire lever 4 to unlatch the cuckoo s door allowing the door to swing freely The wire latch should remain affixed to the clock body 5 At the bottom of the case you will see a paper packet which secures the clock s chains Loosen and remove the paper packet allowing the ends of the chains with the round brass washers to extend fully If there are knots in the chains un tangle them gently Once the chains are untangled keep the clock in an upright position to avoid their sliding inside the clock and off the sprocket wheels 1 1 Hang clock at 6 feet or higher 6 For maximum running time hang your clock approximately 6 off the floor on a secure strong nail or hook At this height the round chain ends should hang about 6 off the floor Running time will be a full day or week depending on the clock mechanism If there is no stud behind the wall where the nail is to be driven use wallboard anchor molybolt or heavy duty fastener of the correct type for your wall Picture hooks will not provide the necessary level of safety Make sure the clock hangs flush on the wall and does not lean forward 7 Attach the pendulum to the U shaped wire pendulum leader at the bottom of the
7. ur hand near the shaft and turn it clockwise or counter clock wise so that it correctly indicates the number of hours counted by the cuckoo Then using both thumbs push the hand down on the shaft back towards the dial to tighten In the event that your clock stops running and the minute hand won t move forward turn the minute hand counter clockwise one hour then slowly advance it clockwise or counter wise to the correct time and repeat No 2 above 4 Winding the clock To wind your clock firmly pull the free ends ring ends of the chains to raise the weights to the base of the clock To avoid the chains coming off the sprockets inside the clock always keep the weights on the chains Avoid roughness in winding and never pull on the weights themselves as this may damage the chains or ratchet mechanism It is impossible to overwind your cuckoo however you may damage the cha if you continue to pull on them once the weights have reached the base of the clock ns 5 Regulating your clock You can adjust your clock to run faster or slower To make your clock run faster unhook the pendulum and slide the pendulum carving up a bit on the pendulum stick to make the clock run slower pull the carving down a bit Reattach the pendulum to the pendulum leader at the base of the clock Set your clock using an accurate time source after each pen dulum adjustment Once your clock is accurately regulated you can mark the bac
Download Pdf Manuals
Related Search