Connecting The Receiver - produktinfo.conrad.com
Contents
1. FAV gt Press FAV to add the marked channel to the favorite s list gt Press the OK button gt Select with PR the favorite list for the selected channel Confirm with the OK button Smart MX 04 EN 19 Edit Channel Locking gt Press Find to lock channels Select the channel which should be locked with the PR buttons gt Press the OK button to lock the selected channel Skip gt Press ZOOM to skip channels in the channel list Select the channel which should be skipped with PR To confirm press OK Move gt Press TXT to move channel to another place in the list gt Select the channel which should be moved Press the OK button Move the selected channel with PR to the new position Press the OK button to store the channel at the new position Change Sort gt Press Audio to change the channel list Then press Find to get an overview about the sorting mode Select a sorting mode with PR and confirm with the OK button Change Press Audio to change the channel list Press ZOOM to change the channel name To confirm press OK Insert the new name with the Numeric buttons 0 9 Just like on mobile phones every numeric button has also some alphanumeric functions With pressing several times on the same button you can select the letters with are printed on top of the Numeric buttons 0 9 of the remote control gt Press the VOL buttons to move to2. Smart MX 04 EN 9 Remote Control Remote Control 10 EN Smart MX 04 Remote Control 1 Standby Switches between operation and standby mode 2 Numeric For direct choice of channels or for numeric or buttons 0 9 alphanumeric figures 3 TV Radio Switches between TV and radio mode 4 EPG Shows detail information for individual channels Press again for going back to previous mode 5 VOL Turns up down volume or changes the page of channel list 6 FAV Shows current favorite channel list 7 Find Find a channel 8 TXT Displays teletext information if the broadcaster supports it 9 SAT Shows the programmed satellites 10 TV AV Switches on and off the TV scart output 11 SLEEP Sleep Timer 12 INFO Displays the program information on the screen 13 Mosaic Displays several channels on the screen 14 Pause Pauses to freeze the screen 15 Audio Changes between different audio modes 16 ZOOM Magnification of display details 17 Up Switches between the satellites 17 Down Switches between the satellites 18 EXIT Back to former status 19 PR Changes channels or moves the cursor upwards and downwards in the menu 20 OK Displays the channel list and selects the item on the menu 21 MENU Moves to main menu during TV viewing 22 PR Change to the previous selected channel 23 Mute Turns sound on or off Smart MX 04 EN 11
3. Press MENU Select the menu point Installation To confirm press OK Insert the code see page 18 Antenna Connection To select the kind of antenna go to the menu Installation gt gt gt gt gt Select the menu point Antenna Connection To confirm press OK Select Fixed Antenna if you receive your satellite channels with a fixed satellite antenna Select Motor Antenna if your satellite antenna is a slewable one For leaving the menu press EXIT once or repeatedly Satellite List For selecting the satellite list go to the menu Installation gt G28 8 Select the menu point Satellite list To confirm press OK Select from the list the satellites which you can receive To confirm press OK Behind the satellite name appears a checkmark For leaving the menu press EXIT once or repeatedly Antenna Setup LNB Type To change the LNB type go to the menu Installation ULLI ULLL 22 Select the menu point Antenna Setup To confirm press OK Select the menu point LNB Type To confirm press OK Select the LNB type To confirm press OK For leaving the menu press EXIT once or repeatedly EN Smart MX 04 Installation Motor Type To change the activation of your satellite antenna go to the menu Installation on page 22 gt Select the menu point Antenna Setup Toconfirm press OK Select the menu point Motor Type gt Select the kind of activation You can select between
4. 60 EN Smart MX 04 Operation With The Remote Control Zoom Function While watching TV press ZOOM to call the zoom menu Figure 29 ZOOM menu You can move the section with the PR and the VOL buttons Press ZOOM again and you change the size of the section To leave the ZOOM menu press EXIT Smart MX 04 EN 61 Operation With The Remote Control Satellite Overview 1 All Satellite 10774 22000 H Figure 30 Overview over the programmed satellites Press SAT to get an overview over the programmed satellites TV Switch Press TV AV to switch between satellite receipt via the MX 04 and antenna receipt via TV Set Sleep Timer Press SLEEP to call the sleep timer With repeating pressing of the SLEEP button you can change the time OFF 10 30 60 90 120 62 EN Smart MX 04 Operation With The Remote Control Program Information 16 45 17 10 Loriot 17 10 18 00 18 15 18 45 Einfach geni 18 45 19 30 DAS 19 30 20 00 Hamburg Jou 2090 2015 Tagesschau Bei Kr mers Stratmanns Figure 31 Detailed Program Information Digital television gives the opportunity to broadcast additional information for the program Not every channel offers this service In this case the text field is empty Press INFO to get information about the running program Press INFO again and you get more detailed information about the current program If the information is very detailed you can scroll forward with the ZO
5. If you want to search for radio channels then select Radio If you want to search for TV and radio channels then select TV Radio Uug 26 EN Smart MX 04 Installation Network Search gt Select the menu point Network Search in menu Single Satellite Search on page 26 This menu point is only active when you have selected Preset Scan If you want to search with network search then select Yes Otherwise select No Scan Mode gt Select the menu point Scan Mode in menu Single Satellite Search on page 26 gt Select the search mode Preset Scan or Blind Search Search gt Select the menu point Search in menu Single Satellite Search on page 26 gt Press OK to start the search run Multi Satellite Search To search channels on several satellites go to the menu Installation on page 22 Select the menu point Multi Satellite Search Confirm with OK At the bottom of the menu you can see the satellites on which the channels will be searched For leaving the menu press EXIT once or repeatedly Satellite gt Select the menu point Satellite in menu Multi Satellite Search gt To confirm press OK Select a satellite from the list gt To confirm press OK Scan Channel gt Select the menu point Scan Channel in menu Multi Satellite Search on page 27 If you only want to search for TV channels then select TV Channels If you want to search for radio channels then select Radio I
6. Remote Control Rear Side With Modulator optional OOA s Geh wm e NECIT RF IN en N 2 CH IME AUA ANCIN Figure 2 rear side of receiver 1 POWER On Off switch for main supply 2 VIDEO Video output Composite 3 AUDIO L Audio output left 4 SPDIF Digital output 5 VCR SCART output for Video 6 TV SCART output for TV 7 LNB OUT Satellite signal loop through out 8 LNB IN Digital satellite signal input 9 RF IN Antenna input 10 RF OUT Antenna output 11 RS232 Serial Low Speed Interface 12 AUDIO R Audio output right 13 0 12V 0 12 Volt output 14 175 250 V AC mains connection 50 60 Hz 12 EN Smart MX 04 Remote Control Inserting Of Batteries Figure 3 Inserting of batteries into the remote control Open the battery compartment on back side of remote control Insert two batteries type AAA according to polarities mentioned on the battery compartment Push the cover of the battery compartment carefully till the cover is locked Replacing Of Batteries Replace discharging batteries on time Always replace both batteries simultaneously and use batteries of the same type Safety Instructions Attention Do not recharge or destruct normal batteries Do not throw them into fire Batteries may contain toxic agents that are hazardous to health and environment Therefore dispose of the batteries immediately according to
7. Scope Of Supply Please check the scope of supply after purchase If any part is missing please contact your dealer e The Satellite Receiver Smart MX 04 e Remote Control e 2 pieces of batteries type AAA for the remote control e Instruction Manual With the Smart MX 04 Free To Air Digital Satellite Receiver you can receive Free To Air channels There are hundreds of free digital TV and Radio channels which can be received The digital satellite receiver Smart MX 04 has a mains connection of 175 250 V AC 50 60 Hz The most common digital broadcasting stations of the mostly used satellites are pre programmed You can receive the digital channels broadcasted through these satellites as soon as you have connected the receiver to a satellite antenna and oriented it to one of these satellites All functions of the Receiver can be operated with the remote control All receiver settings can be done easily using the user interface menu on the TV monitor The user interface supports multiple languages 8 EN Smart MX 04 Control Elements Functions Control Elements Functions Front Side Figure 1 Control Elements at the front side No Symbol Description 1 Display Channel display 2 PRY Button to switch the channels downwards step by step 3 PRA Button to switch the channels upwards step by step 4 On Off switch Switch between power and standby 5 Standby LED Indicator of standby
8. Input F type connector Frequency Range Input Level LNB Power Supply LNB Control Signal DiSEqC Control Demodulator Front End Module Input Data Rates SCPC and MCPC compatible System Resources Processor SDRAM FLASH Video Decoder Video Resolution Video format Aspect Ratio Modulator optional Channel Remote Control Batteries Range Smart MX 04 IEC 169 24 950 MHz 2150 MHz 65 dBm to 25 dBm 13 18 V max 400 mA 22 kHz 0 12 V Version 1 2 QPSK 2 MS s to 45 MS s 32 bit 60 MHz 8 MByte 2 MByte 720 x 576 PAL 720 x 480 NTSC 4 3 16 9 21 69 2x type AAA max 7m EN 69 Technical Specifications Power Supply Power Consumption Supply Voltage Connectors Rear Panel Data Interface Digital Tuner Input LNB IN Loop Througn digit Tuner LNB OUT TV SCART VCR SCART Analogue Video Output Analogue Audio Output Digital Audio Output SPDIF 0 12V Output Temperature Operating Temperature Storage Temperature Dimensions Width Height Depth Weight 70 EN max 15 W 175 250 V AC 50 60 Hz 9 pole D Sub IEC 169 24 IEC 169 24 RGB CVBS Audio CVBS Audio 1 x RCA Cinch coaxial 2 x RCA Cinch coaxial 1 x RCA Cinch coaxial 1 x RCA Cinch coaxial 0 C to 40 C 40 C to 65 C 260 mm 50 mm 165 mm ca 1kg Smart MX 04 Supplier WELA electronic Handels GmbH Industriestra e 29 78112 St Georgen Germany Service Hotline 0049 1805 9352 11 0 1
9. MHz Receiver 1 Receiver 2 Receiver 3 Receiver 4 Receiver 5 Receiver 6 Receiver 7 Receiver 8 Ee Note Write down the freguency of your receiver in the last fissure of this table so you have all relevant information in this document Smart MX 04 L ENG 3 Note to this document Adjusting of the ZF canals and frequency gt gt gt Switch on the receiver Press the button on the remote control Press the and N En select installation and confirm with the button Enter the password in the state of delivery 0000 is pre installed The installation menu is indicated gt gt Select the Menu point antenna setup Select the menu point LNB freguency after this select unicable 9750 10600 Select the menu point IF Channel enter a ZF channel Begin with channel 1 one of the ZF channels in climbing up order assign to the connected receivers Choose Center Freg and set up the freguency see the allocation table The bargraph signal strength and signal quality will display immediately when the correct frequency is chosen Press the button The adjustments are saved You are back in the Installation menu gt Press the button twice The receiver is into the normal mode and ready to receipt 4 ENG Smart MX 04 L simpl www smart electronic de television Smart
10. OK Select with VOL the desired language To confirm press OK For leaving the menu press EXIT once or repeatedly Dk A Smart MX 04 EN 29 System Setup First Audio To change the first audio language go to the menu System Setup on page 29 Select the menu point Language To confirm press OK Select the menu point First Audio To confirm press OK Select with VOL the desired language To confirm press OK For leaving the menu press EXIT once or repeatedly Second Audio To change the second audio language go to the menu System Setup on page 29 Select the menu point Language To confirm press OK Select the menu point Second Audio To confirm press OK Select with VOL the desired language To confirm press OK For leaving the menu press EXIT once or repeatedly ggu Ugg Subtitle Language To change the language of the subtitle go to the menu System Setup on page 29 Select the menu point Language To confirm press OK Select the menu point Subtitle Language To confirm press OK Select with VOL the desired language To confirm press OK For leaving the menu press EXIT once or repeatedly utu zug ze 30 EN Smart MX 04 System Setup Teletext To change the language of the teletext go to the menu System Setup on page 29 Select the menu point Language To confirm press OK Select the menu point Teletext To confirm press OK Select with VO
11. color in vertical horizontal or diagonal line will be changed to your own color 56 EN Smart MX 04 Games Start Starting the game gt Select the menu point Start gt To confirm press OK gt For leaving the menu press EXIT once or repeatedly Setup Setup of Level gt Select the menu point Setup Select the level by pressing OK Cancel Leave the menu gt Select the menu point Cancel to leave the menu To confirm press OK Smart MX 04 EN 57 Operation With The Remote Control Operation With The Remote Control Switch The Receiver On And Off Press the Standby button to switch the receiver on and off Change The Volume Change the volume with the VOL buttons Change The Channel Press Numeric buttons 0 9 for the channel number To change the channel in ascending or descending order you can also press the PR buttons Teletext For teletext press the TXT button The teletext shows news and information about the program To exit the teletext press EXIT 58 EN Smart MX 04 Operation With The Remote Control Electronic Program Guide Figure 27 Electronic Program Guide EPG For the electronic program guide press the EPG button Here you can get information of the just running and following programs if supported by the broadcaster Press EXIT to leave the EPG Favorite List While watching TV or listening to the radio you can press the FAV button and retrieve a
12. delete all settings select Yes and confirm with the OK button If you do not want to delete the settings select No press the OK button For leaving the menu press EXIT once or repeatedly GQ 4 Motor Setting To change the motor settings go to the menu Installation on page 22 gt Select the menu point Antenna Setup gt To confirm press OK Select the menu point Motor Setting To confirm press OK At the bottom of the menu you can see two progress bars for signal strength and signal quality Satellite gt Select the menu point Satellite gt To confirm press OK Select the satellite which position you want to setup gt To confirm press OK Transponder Select the menu point Transponder To confirm press OK gt Select a transponder To confirm press OK Pos No amp Save gt Select the menu point Pos No amp Save gt Select a position number 24 EN Smart MX 04 Installation GoToX gt Select the menu point go to X gt To confirm press OK gt Select a position gt To confirm press OK Save Select the menu point Save Change the setting of the satellite antenna with the VOL buttons Safe your changes with the OK button If you want to safe the new settings then select Yes and confirm with the OK button gt Otherwise select No and confirm with the OK button Uug Recalculation gt Select the menu point Recalculation gt To confirm press O
13. following settings e USALS e DiSEqC 1 2 e For leaving the menu press EXIT once or repeatedly Local Longitude To change the local longitude go to the menu Installation on page 22 This menu point is only active when antenna setting is set on USALS see chapter Motor Type page 23 gt Select the menu point Antenna Setup To confirm press OK Select the menu point Local Longitude Select the direction east west with VOL To confirm press OK Insert the longitude with the Numeric buttons 0 9 For leaving the menu press EXIT once or repeatedly Local Latitude To change the local latitude go to the menu Installation on page 22 This menu point is only active when antenna setting is set on USALS see chapter Motor Type page 23 gt Select the menu point Antenna Setup To confirm press OK Select the menu point Local Latitude Select the direction north south with VOL To confirm press OK Insert the latitude with the Numeric buttons 0 9 For leaving the menu press EXIT once or repeatedly GURY VII E84 Smart MX 04 EN 23 Installation Delete All To delete the saved satellite positions go to the menu Installation on page 22 This menu point is only active when antenna setup is set on DiSEqC 1 2 see chapter Motor Type page 23 gt Select the menu point Antenna Setup To confirm press OK Select the menu point Delete all To confirm press OK If you really want to
14. operating the MX 04 L Keep the user manual always next to the Receiver The Receiver Smart MX 04 L is equipped with especially power saving electric and electronic components Moreover a thought out energy management helps to save energy Hence in the standby modus there is no more time indicated on the display Only the red shining standby light and two green points EH io Veit ame smert CD Figure 1 Display in the standby modus The current consumption in the standby modus is less than 1 Watt 2 ENG Smart MX 04 L Connection with an unicable system Connection with an unicable system Note CZ The unicacable system is only funcionable if the structure of receiving or according to their components are prepared i e if an unicable system exists The digital satellite receiver MX 04 L makes sure that instead of the different LNB frequencies the receipt mode can be moved to the unicable standard It s possible to connect up to eight receivers independent of each other Each receiver has to be assigned to one specific ZF channel and a matching frequency in the setting menu The allocation of canals and frequency is depending on LNC or multi switch manufacturer The data sheet and the technical documentation of your LNC and or multi switch contains an allocation table similarly of the following Adjusting of the ZF canals and frequency Receiver ZF example frequency frequency MHz channel
15. point RAPS Scanning with the PR buttons gt Activate the option off with the VOL buttons gt Leave the menu by pressing EXIT several times If you selected off the flash checking RAPS data will not be visible any more and the receiver will go directly to the last channel list Manual Updating Of The RAPS List If you have switched off the automatic updating of the RAPS list you can search manually for an update gt Press MENU Select the menu accessories with the PR buttons Confirm your selection with OK If necessary insert the code IC 7 Note The default code is 0000 Uug Select the menu RAPS System with the PR buttons Confirm your selection with OK Select the menu point RAPS Mode with the PR buttons Activate the option Update with the VOL buttons Select the menu point Start with the PR buttons gt Confirm your selection with OK The current settings for RAPS will now be shown and the receiver is checking for an updated RAPS list If the data for RAPS Date Receiver list on your receiver and Date current list are different the RAPS list has been changed In this case the update starts automatically If there is no change in the RAPS list the receiver reports no change gt Press OK and confirm by pressing again OK to get back to programming mode Uug Change RAPS Settings Belated If you want to change the RAPS settings for examp
16. press OK Select the timer which you want to change or program To confirm press OK Select the menu point Wakeup Channel To confirm press OK Select the channel To confirm press OK Go to Save to safe your settings and press the OK button Go to Cancel for not saving the settings and press the OK button For leaving the menu press EXIT once or repeatedly ULLI ULLI LIUL 36 EN Smart MX 04 System Setup Wakeup Message You can only chose the message if the setting in the menu point Timer Service see page 36 is notice To chose a message go to the menu System Setup see on page 29 gt Select the menu point Timer Setting To confirm press OK gt Select the timer which you want to change or program gt To confirm press OK gt Select the menu point Wakeup Message gt To confirm press OK gt Select the kind of notice To be available are e Birthday e Anniversary e General Goto Save to safe your settings and press the OK button Go to Cancel for not saving the settings and press the OK button For leaving the menu press EXIT once or repeatedly Wakeup Date To select the wakeup date go to the menu System Setup see on page 29 Select the menu point Timer Setting To confirm press OK Select the timer which you want to change or program To confirm press OK Select the menu point Wakeup Date Insert the date Go to Save to safe your settings and press the OK button Go
17. to channel 38 Connecting A Dolby Digital Device If you want to connect a Dolby Digital device you can connect it with a coaxial cable to the digital output SPDIF of the receiver For connecting to the Dolby Digital device please read its user manual Operation After connecting all devices you can plug in the mains supplies of all connected devices and switch them on Smart MX 04 EN 15 Start Operating The Receiver Start Operating The Receiver Switching On The Receiver After connecting the receiver see page 14 you can switch it on with the switch at the rear side You can see Strt for start on the display of the receiver On the TV screen you find a selection of available languages Figure 5 Selection of language after first startup Select your language with the PR buttons and confirm with OK 16 EN Smart MX 04 Operating At The Front Panel Operating At The Front Panel Figure 6 Front side of the receiver At the rear side of the receiver is the main supply switch Here you should switch the device off if it will not be used for longer time Here you also have to switch the device on afterwards With the On Off switch at the front side you can switch your receiver to the standby mode If the receiver is in the standby mode press the On Off switch to switch the receiver on On the display you can see the actual channel number For selecting the channels upwards press PR A for selecti
18. 4 min from German landline Fax 00 49 7724 94 78 333 E Mail info smart electronic de Internet www smart electronic de The warranty for the digital satellite receiver MX 04 of the WELA electronic Handels GmbH is in conformity with the prevailing statutory regulations at the time of purchasing the product The WELA electronic Handels GmbH reserves the right to change the specification at any time without prior notice Declaration of Conformity The WELA electronic Handels GmbH Industriestra e 29 78112 St Georgen Germany hereby declares conformity with the following guidelines and standards for this product e Guideline for low voltage 2006 95 EG e EN 60 335 1 e EN 60 335 2 15 e Guideline for electromagnetic compatibility 2004 108 EG e EN 55 013 2001 e EN 55020 e EN 61 000 3 2 2000 e EN 61 000 3 3 1995 A1 2001 e EN 61 938 Equipment type model Free To Air Digital Satellite Receiver WELA electronic Handels GmbH Smart MX 04 EN 71 Einfach 9 fernsehen www smart electronic de SMES Simply television Digital satellite receiver MX 04 L Supplement to the user manual MX 04 version 07 04 2009 simp ly www smart electronic de television Smart Note to this document This supplement to the operating instructions MX04 describes additional functionalities and qualities of the Receivers MX 04 L Please read the user manual and the supplement to the user manual carefully before
19. K gt If you want to have all satellite positions recalculated then select Yes and confirm with the OK button gt Otherwise select No and confirm with the OK button Limit Setup To setup or change the limits for the slewable satellite antenna go to the menu Installation on page 22 gt Select the menu point Antenna Setup To confirm press OK gt Select the menu point Limit Setup To confirm press OK Limit Setup gt Select the menu point Limit Setup gt Select the limit of the position You can select following points e Disable Limit e West Limit e East Limit Smart MX 04 EN 25 Installation Limit Setup gt Select the menu point Limit Setup gt Change the limit with the VOL buttons Go To Reference gt Select the menu point Go to reference gt To confirm press OK gt For leaving the menu press EXIT once or repeatedly Single Satellite Search To search channels on a satellite go to the menu Installation on page 22 Select the menu point Single Satellite Search gt To confirm press OK gt For leaving the menu press EXIT once or repeatedly Satellite gt Select in menu Single Satellite Search the menu point Satellite To confirm press OK gt Select a Satellite from the list gt To confirm press OK Scan Channel gt Select the menu point Scan Channel in menu Single Satellite Search If you only want to search for TV channels then select TV Channels
20. K gt For leaving the menu press EXIT once or repeatedly RF System only for Receivers with Modulator To change the color TV norm of the modulator go to the menu System Setup see on page 29 gt Select the menu point TV System To confirm press OK Select the menu point RF System To confirm press OK Select the norm for the modulator with VOL To be available are e PAL BG e PAL I e PAL DK e NTSC To confirm press OK gt For leaving the menu press EXIT once or repeatedly Uug RF Channel only for Receivers with Modulator To change the output channel of the modulator go to the menu System Setup see on page 29 Select the menu point TV System To confirm press OK Select the menu point RF Channel To confirm press OK Select the output channel for the modulator Default setting is the RF channel 38 To confirm press OK For leaving the menu press EXIT once or repeatedly GU 4 GY Smart MX 04 EN 33 System Setup Local Time Setting GMT Usage To change the time setting go to the menu System Setup see on page 29 Select the menu point Local Time Settings To confirm press OK Select the menu point GMT Usage Select On if the time setting should be automatically Select Off if you want to set or change the time manually To confirm press OK For leaving the menu press EXIT once or repeatedly GMT Offset To choose the time zone go to the menu System Se
21. L the desired language To confirm press OK For leaving the menu press EXIT once or repeatedly ULLI UL TV System Figure 9 menu for TV System Display Mode To change the color TV norm go to the menu System Setup on page 29 gt Select the menu point TV System gt To confirm press OK gt Select the menu point Display Mode gt To confirm press OK Smart MX 04 EN 31 System Setup gt Select the adequate color TV norm for your system with the VOL buttons To be available are following norms e PAL e PAL M e PAL N e NTSC e Auto To confirm press OK For leaving the menu press EXIT once or repeatedly Aspect Mode To change the screen format go to the menu System Setup see on page 29 Select the menu point TV System To confirm press OK gt Select the menu point Aspect Mode To confirm press OK gt Select with VOL the adequate screen format for your TV Set To be available are e 4 3 PanScan e 4 3 Letter Box e 16 9 To confirm press OK gt For leaving the menu press EXIT once or repeatedly Video Output To change the format of the video signal go to the menu System Setup see on page 29 Select the menu point TV System To confirm press OK gt Select the menu point Video Output Select the video output format with VOL To be available are e RGB e CVBS 32 EN Smart MX 04 System Setup To confirm press O
22. OM button and back with the Find button Smart MX 04 EN 63 Operation With The Remote Control Mosaic Figure 32 Mosaic Press Mosaic button to get an overview about the current and the next eight channels Pause Function Press Pause button to freeze the picture of the current program Press Pause button again to go back to normal Switching Channels Press the Numeric buttons 0 9 to insert the number of channel You can go to the next or previous channel with the PR buttons Press Up or Down button to switch between the channel lists of the several programmed satellites Press lt PR button to recall the last selected channel 64 EN Smart MX 04 Operation With The Remote Control Audio Settings While watching TV press the Audio button Select the audio mode with the VOL buttons Dependant on the selected channel you can chose between following mode e Mono sound track e Left e Right e Stereo e AC3 After selecting the desired mode leave the menu with EXIT Muting For Muting press the Mute button On the screen you will see a symbol with crossed out loudspeaker Press Mute again to hear the sound The symbol disappears Smart MX 04 EN 65 Storing Of Product Storing Of Product Pull all plugs out of the sockets Screw the LNB cable from the receiver Take the batteries out of the remote control if you do not use the receiver for a longer period Pack the receiver the
23. Simply Digital Satellite Receiver he channel list for Astra 19 2 Hotbird 13 und Turksat 42 e Individually favorite lists Details see page 46 User Manual Version 09 01 2008 Einfach www smart electronic de fernsehen smen Preface Dear Customer thank you for buying the Smart MX 04 Free To Air Digital Satellite Receiver Please read this user manual carefully before using this device This operating manual will help you in the e appropriate e safe and e favorable usage of the digital satellite receiver in short the receiver We assume that the user of the receiver has overall knowledge regarding the handling of audio and video equipment Each person who e installs e connects e operates e cleans or e disposes of this receiver must be familiar with the entire content of this operating manual Always keep this operating manual in the proximity of the receiver Please keep this instruction manual for consulting near by the receiver WELA electronic Handels GmbH Use Raps After switching on the receiver for the first time or after default C reset you will be asked if you would like to use RAPS Select yes by pressing OK on the remote control For more information see chapter RAPS on page 46 2 EN Smart MX 04 Contents Profa O SPPEBREPFOPRERFFPPFEREFFEPFREHSFEPEREEFFEPEFEEEFFEPEEEREFEPEREEEFELFHERFEEPFEREFEFPERERFEFEPERERFFEPFERERFEPFR 2 CONTE enge 3 Sa
24. a 19 2 E Figure 17 Selection of receivable satellites Afterwards you can see a selection of receivable satellites gt Select the satellite which you would like to receive with the PR buttons gt Confirm your selection with OK The field behind the selected satellite will be checked now Repeat these steps for all desired satellites Finally press Vol to come to the next step Figure 18 Selection of RAPS list The list on the screen shows the available RAPS data gt To select the ideal list press the PR buttons 48 EN Smart MX 04 RAPS Confirm your selection with OK Adjust Local TV Channel In the following menu you must select the local TV channel Figure 19 Selection of local channel You can see the available local TV channels in a list gt Select the requested TV channel with the PR buttons gt Confirm your selection with the OK Note Depending on the receiver and the input on the following IC pages H can happen that some of the following menu points will not be shown In any case you have to follow all settings through Only then RAPS is completely configured Allow Erotic Channels gt As next you can select if you want to watch channels with erotic contents gt Select yes or no with the VOL buttons Smart MX 04 EN 49 RAPS M chten Sie Programme mit Erotikinhalten sehen Figure 20 Protection of minors Confirm you
25. block defect The antenna is not adjusted to the satellite Adjust the antenna TheLNB is defective Replace the LNB The remote control does not work The batteries are empty Replace them with new ones The remote control does not always work Focus the remote control to the front side of the receiver and assure that nothing else is between the remote control and the receiver If you cannot find out what is wrong with your device please contact your local dealer Smart MX 04 EN 67 Disposal Attention Never throw the receiver and the batteries in normal household waste They may contain toxic agents that are hazardous to health and environment Therefore dispose of the device and the batteries immediately according to the prevailing statutory regulations Never throw the batteries in normal household waste EU directive for disposal of used devices in private household Figure 33 WEEE Symbol Used devices contain valuable materials that should be recycled Electronic equipment is not household waste in accordance with directive 2002 96 EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 27th January 2003 on used electrical and electronic equipment it must be disposed of properly At the end of its service life take this unit for disposal at a relevant official collection point 68 EN Smart MX 04 Technical Specifications Technical Specifications LNB Tuner
26. cables and the remote control into the original carton gt Save the receiver and all accessories at a dry and dust free location Protect the receiver from frost DD A Cleaning Danger of Electric Shock No liquids must run into the receiver Never clean it with a wet cloth Always pull the plug out of the socket before cleaning Attention Never use solvent containing agents like benzene or similar These agents can damage the surface of the housing Pull the plug out of the socket before cleaning the receiver Clean the housing of the receiver only with a dry cloth 66 EN Smart MX 04 Troubleshooting The display shows nothing The power cable is not plugged in Put the plug of the power cable into the mains socket The power switch is off Switch power on at the backside of the device No volume or picture the LED is on The receiver is on standby Press the power button The receiver will switch on and the program is on the screen No volume or picture The antenna is not adjusted to the satellite Adjust the antenna correctly No or only faint signal Please check the cable between LNB and receiver and between receiver and connected devices Adjust the antenna No picture on TV screen The system is connected incorrectly Check connection of SCART cable TV Set is not in AV mode Switch the TV set on AV input Bd picture
27. ct switch on and watch TV But this receiver is able to do more It has the automatical programming system RAPS which we recommend to use so that you always receive the updated channels Today you can receive more than 1 200 TV and radio channels via the most important satellite system Astra 19 2 and Eutelsat Hot Bird 13 east and Turksat 42 Modern satellite receivers have stored all important channels at delivery status But what is later Nearly every week there are new interesting channels To store these new channels in the existing set top box is not so easy for most of the users And furthermore the new channels will usually be added on the last place so that the viewer has to reprogram his list time consuming RAPS gives the viewer and the listener an easy possibility to be always up to date RAPS relieves you of the task of programming And this without any additional costs You can configure certain standard settings like country or preferred regional channels you can also hide foreign languages or certain channels like erotic channels Whenever you switch on the receiver RAPS searches automatically for new channels This lasts only a few seconds If there are new channels these will be added automatically to the channel list and will be shown on the screen as new channels If channels will be shut down irrecoverably they will be deleted automatically The new channels will be sorted into logical blocks this is why also so
28. e To confirm press OK Timer Mode To set the timer repetition go to the menu System Setup see on page 29 Select the menu point Timer Settings To confirm press OK Select the timer which you want to change or program To confirm press OK Select the menu point Timer Mode Select the frequency of repetition To be available are following settings e off e once e daily e weekly e monthly G U8 E84 e yearly Go to Save to safe your settings and press the OK button Smart MX 04 EN 35 System Setup gt Go to Cancel for not saving the settings and press the OK button gt For leaving the menu press EXIT once or repeatedly Timer Service To select the service for the timer go to the menu System Setup see on page 29 Select the menu point Timer Setting To confirm press OK Select the timer which you want to change or program To confirm press OK Select the menu point Timer Service Select the service To be available are gt gt gt gt gt gt e Channel e Message Go to Save to safe your settings and press the OK button Go to Cancel for not saving the settings and press the OK button For leaving the menu press EXIT once or repeatedly Wakeup Channel You can only choose a channel if the setting in menu point Timer Service see page 36 is set on channel gt Goto the menu System Setup see on page 29 Select the menu point Timer Setting To confirm
29. e letters with are printed on top of the Numeric buttons 0 9 of the remote control gt Press the VOL buttons to move to the left or right in the input field To add a letter press first the VOL button Then press the numeric button for the desired letter Note Press Find to switch between small and capital letters You can see on the letters ABC on top of the input panel which C spelling is active Press ZOOM for deleting a figure or letter Press TXT to finish the input and show the entered channel Press Audio or EXIT to exit the dialog box gt For leaving the menu press EXIT once or repeatedly Other Figure 13 menu for other 42 EN Smart MX 04 System Setup LNB Power To switch the LNB voltage on or off go to the menu System Setup see on page 29 Select the menu point Other To confirm press OK Select the menu point LNB voltage Select On if there should be any voltage at the LNB IN socket Select Off if there should be no voltage at the LNB IN socket Uug Channel Play Type To change the channel type go to the menu System Setup see on page 29 Select the menu point Other To confirm press OK Select the menu point Channel Play Type Select Free if you only want to watch free to air channels Select All if you want to watch all channels For leaving the menu press EXIT once or repeatedly UL EE Y Channel Change To select the kind of change of channe
30. eatedly Menu Lock gt gt gt gt Select the menu point Menu Lock in the menu Parental Lock Select On if you want to lock some menus Select Off if all settings shall be free accessible Only exception the menu Parental Lock can only be opened after inserting the code For leaving the menu press EXIT once or repeatedly Channel Lock gt gt gt gt Select the menu point Channel Lock in the menu Parental Lock Select On if you want to lock some channels Select Off if all settings shall be free accessible Only exception the menu Parental Lock can only be opened after inserting the code For leaving the menu press EXIT once or repeatedly New Password gt Uug Select the menu point New Password in the menu Parental Lock Insert a new code with the Numeric buttons 0 9 Repeat the new code under confirm password You will see the message Change password successfully Confirm the new code with the OK button For leaving the menu press EXIT once or repeatedly C When the new code is inserted and confirmed there is no Note possibility to revoke or cancel the code change Smart MX 04 EN 39 System Setup OSD Setting Figure 11 menu for OSD Setting To change the settings of the OSD go to the menu System Setup see on page 29 gt Select the menu point OSD Setting gt To confirm press OK gt For leaving the menu press EXIT once or repeated
31. eset the receiver to default setting go to the menu accessories gt Select the menu point Factory Setting To confirm press OK Select Yes if you really want to reset the receiver to default setting Select No if you want to keep the settings of the receiver For leaving the menu press EXIT once or repeatedly G28 8 SatcoDX Auto Programming To start the SatcoDX Auto Programming go to the menu Tools Select the menu point SatcoDX Auto Programming Toconfirm press OK Start the programming with the OK button gt For leaving the menu press EXIT once or repeatedly SW Upgrade by OTA To upgrade the software of the receiver over satellite go to the menu Tools gt Select the menu point SW Upgrade by OTA gt To confirm press OK gt Select the parameter Satellite Transponder Frequency Symbol Rate Polarisation and Download PID with the PR and VOL buttons gt Select the menu point Start Start the Update with the OK button gt For leaving the menu press EXIT once or repeatedly Smart MX 04 EN 45 RAPS M chten Sie Raps verwenden Schauen Sie auf www raps tv nach um zu erfahren was RAPS ist Mit RAPS verpassen Sie nie wieder Programme Dr cken Sie Ja f Figure 15 Decision for RAPS What is RAPS The receiver is preset for the receipt of Astra 19 2 Eutelsat Hot Bird 13 east and T rksat 42 with the common receiving installations You only have to conne
32. f you want to search for TV and radio channels then select TV Radio L Smart MX 04 EN 27 Installation Network Search gt gt gt Select the menu point Network Search in menu Multi Satellite Search on page 27 This menu point is only active when you have selected Preset Scan If you want to search with network search then select Yes Otherwise select No Scan Mode gt gt Select the menu point Scan Mode in menu Multi Satellite Search on page 27 Select the search mode Preset Scan or Blind Search Search gt gt Select the menu point Search in menu Multi Satellite Search on page 27 Press OK to start the search run TP List To select the transponder list go to the menu Installation on page 22 Tutug 28 Select the menu point TP List To confirm press OK To edit the TP List press Find To add a transponder press ZOOM To delete a transponder press TXT To search a transponder press Audio For leaving the menu press EXIT once or repeatedly EN Smart MX 04 System Setup System Setup gt Press MENU gt Select the menu point System Setup gt To confirm press OK Language Figure 8 menu for language settings Language The menu language is set when the receiver was stared for the first time see chapter Start Operating The Receiver page 16 To change the menu language go to the menu System Setup gt Select the menu point Language To confirm press
33. fety Instructions 2 3 2 22er seh 6 Electrical Connection EE 6 Correct Battery Handimg A 7 Appropriate HE ET 7 Scope Of SUPply a ssececcecciessccestaneccscccssenestinnecsscessnanaveatueseeceesssnntatbecssdsssnsensscnneces 8 D scripti BE 8 Control Elements FUNCTIONS cccssseeeeeseeeeeeeseeeeeeenseeeeeenseeeeeenseseeneneeeeeenens 9 Belg 9 Remote Control esiccciicicccctcisscedecegseceee caseceecesendeescasecencasenciecassndenccsnndecceeseesiecss 10 Rear Side With Modulator optional 12 Inserting Of Bali nu een 13 Replacing OF Batteries 2 uch 13 safety Mere TONS TE E TTET 13 Connecting The Receiver uunussnsnnnsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnennnnnnnn 14 Connecting The Satellite Antenna A 14 Connecting The TV S aa Aa 15 Connecting A Dolby Digital Device nn 15 Operati N asinen a aai aa a aaa aaa iaa SA 15 Start Operating The Receiver unussnssnrssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnsnnnnnnnnnnnnnnn 16 Switching On The Receiver nn 16 Operating At The Front Panel nnnnunnennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 17 Navigation In The Menus uunusnsesnnnennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 18 WA od ege ee SEELEN SE 18 Edit Channel u ee an 19 TV Channel List nn 19 Radio Channel AS ae un 21 Delete All Aussee im een lei 21 Smart MX 04 EN 3 Contents Sai ee aus 22 Antenna Conneclion nenese ikin EEE ENEE EAEE EE 22 Satellite List nn adana
34. h 59 Favorite DE 59 Find A Channel 60 Zoom Function rn 61 Satellite Overview sueina a aaa a a aaa 62 Ne EE 62 Sleep WR enter eher rare here vanes N E 62 Program Information u element 63 lee 64 Pause Function nennen 64 Switching Channele AA 64 e Eu EE 65 du e DT 65 Storing Of Product nsueesnsennnnnnnnonnnonnnnnnnnunnnunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 66 Cleaning EE 66 Troubleshooting Aa 67 ND TTT 68 Technical Specifications uurunu24444400annnnnnnnnnnnnannnnnnnnnnnnnnnannnnnnnnn nn 69 SUPP gt ET 71 Warranty ee shiek sevwts ueeeetedice raaa AAEE aaa AE AESI 71 Declaration of Conformity uuusssesnannnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nenn 71 Smart MX 04 EN 5 Safety Instructions Attention Please read the safety instructions carefully before operating the receiver Please follow all warnings and instructions on the equipment and in the operating manual Electrical Connection Do not expose the receiver to rain as well as any kind of humidity to avoid risk of fire and electric shock Connect the receiver only to a professionally installed mains socket of 175 240 V 50 60 Hz Never open the casing Otherwise there is a risk of electric shock Ensure that the power source socket is easily accessible Pull out the mains plug from the socket if the equipment is not in use for a longer period of time Always pull out only at the mains plug If f
35. le hidden languages act as follows gt Press MENU gt Select the menu accessories with the PR buttons 54 EN Smart MX 04 RAPS Confirm your selection with OK gt If necessary insert the code IC 7 Note The default code is 0000 Select the menu RAPS System with the PR buttons Confirm your selection with OK Select the menu point RAPS mode with the PR buttons Activate the option configure with the VOL buttons Select the menu point start with the PR buttons Confirm your selection with OK You can see the menu fort he RAPS update on the screen gt Make the RAPS settings like mentioned in chapter Install or update on page 47 GU8 88 8 Smart MX 04 EN 55 Games gt Press MENU gt Select the menu point Game gt To confirm press OK Tetris You must assemble the falling bricks to a wall without gaps Start Starting the game gt Select the menu point Start gt To confirm press OK gt For leaving the menu press EXIT once or repeatedly Setup Setup of Level gt Select the menu point Setup gt Select the level by pressing OK Cancel Leave the menu gt Select the menu point Cancel to leave the menu gt To confirm press OK Othello You must win as many tokens of your own color as possible Set one of your tokens at the rim and all tokens of the other color which are between this token and another of your own
36. list with your favorite TV or radio channels If you did not select any favorite channels no list will appear Instead you will see the notice No FAV Channels Smart MX 04 EN 59 Operation With The Remote Control Find A Channel cAars EL 0k CANCEL Figure 28 Find a channel Every satellite is broadcasting hundreds of digital channels To avoid that you must search the whole channel memory for a certain channel you can insert the name of the channel with the keys and search for it Press Find to get the input field for the name Insert the channel name with the Numeric buttons 0 9 Just like on mobile phones every numeric button has also some alphanumeric functions With pressing several times on the same button you can select the letters with are printed on top of the Numeric buttons 0 9 of the remote control After inserting the first letter you can see on the left side a list with channels which begins with this letter Press the PR buttons and you can scroll through the channels and select the required channel With inserting more letters you can narrow down the result further Press the VOL buttons to move to the left or right To add another letter first press the VOL button Then insert the next letter Press Find to switch between small and capital letters Press ZOOM to delete a digit or letter Press TXT to finish the input and show the selected channel Press Audio or EXIT to leave the menu
37. ls go to the menu System Setup see on page 29 Select the menu point Other To confirm press OK Select the menu point channel change Select Black Screen if you want to see a black screen when switching from one channel to another Select Freeze if you want to see the latest picture before switching to another channel For leaving the menu press EXIT once or repeatedly G44 Beeper The receiver can show the signal strength of the actual channel with a sound signal The stronger the signal the higher will be the sound This is very helpful when adjusting the satellite antenna The better the antenna is adjusted to the satellite the higher is the sound To switch this sound signal on or off go to the menu System Setup see on page 29 gt Select the menu point Other gt To confirm press OK Smart MX 04 EN 43 Tools gt Select the menu point Beeper gt Select On to switch the sound signal on gt Select Offto switch the sound signal off Tools Figure 14 menu for tools gt Press MENU Select the menu point Tools To confirm press OK Insert the code see chapter Insert Code page 18 DL DA Information To get information about hardware and software of the Smart MX 04 go to the menu Tools gt Select the menu point Information gt To confirm press OK gt For leaving the menu press EXIT once or repeatedly 44 EN Smart MX 04 Tools Factory Setting To r
38. ly Subtitle Display gt Select the menu point Subtitle Display in the menu OSD Setting gt Select on to show the subtitles gt Select offto hide the subtitles gt For leaving the menu press EXIT once or repeatedly OSD Timeout gt Select the menu point OSD Timeout in the menu OSD Setting gt To confirm press OK gt Select the time how long the menu shall be displayed The minimum is 1 second and the maximum is 10 seconds gt To confirm press OK gt For leaving the menu press EXIT once or repeatedly 40 EN Smart MX 04 System Setup OSD Transparency gt Select the menu point OSD Transparency in the menu OSD Setting gt To confirm press OK gt Select the value for die transparency To be available are following grades Off e 10 e 20 e 30 e 40 gt To confirm press OK gt For leaving the menu press EXIT once or repeatedly Favorite CAPS DEL er CANCEL Figure 12 change name of favorite list To change the names of the favorite lists go to the menu System Setup see on page 29 gt Select the menu point Favorites gt To confirm press OK gt Select the favorite list supposed to be changed Smart MX 04 EN 41 System Setup gt To confirm press OK gt Insert the new name with the Numeric buttons 0 9 Just like on mobile phones every numeric button has also some alphanumeric functions With pressing several times on the same button you can select th
39. me areas can remain free For this procedure it is necessary to overwrite the general channel list All changes which you have made by hand meanwhile will be deleted then But for all that it is no problem if you want to program channels by yourself You can store an own channel list as favourite list and favourite lists will not 46 EN Smart MX 04 RAPS be changed by the new RAPS list Furthermore you can deactivate RAPS at any time with default reset RAPS gives you plenty of rope here Install or update RAPS automatically Note Scanning for new RAPS lists will only be made in TV mode Switch to TV mode to search manually for a new RAPS list or make later configuration changes of your RAPS system IL The RAPS list will only be transmitted when you receive Astra 19 2 When you use RAPS only the channel list will be updated Favourite lists established by you will remain unaffected gt To activate RAPS on your receiver reset it to default or select RAPS under MENU gt SOFTWARE VERSION gt After default reset you have to select the menu language In the following menu you can choose if you want to use RAPS or not gt If you want to use RAPS select the option yes with the PR buttons gt Press OK The receiver will now search for the updated RAPS list Figure 16 Automatic programming Smart MX 04 EN 47 RAPS You can see the progress of update at the status bar tn Astr
40. ng the channels downwards press PR V Smart MX 04 EN 17 Navigation In The Menus Navigation In The Menus 1c Note A menu is a text field which will be displayed on the screen Selectable options are marked with color Not marked options cannot be changed or selected Most options in the menus are explained on the bottom of the screen With the PR and VOL buttons you can navigate through the menu After marking the selected option you can confirm your selection with the OK button With pressing the EXIT button you can leave the menu and come to the previous mode Insert Code To protect some settings against unauthorized access and changes they are only accessible after inserting a code When selecting one of these menus you will be asked to enter the code iz Note The default code is 0000 You can change the code at any time see chapter Channel Lock on page 39 18 EN Smart MX 04 Edit Channel Edit Channel gt Press MENU on the remote control gt Select the menu point Edit Channel gt To confirm press OK Insert your code TV Channel List Select the menu point Edit Channel in the main menu gt Select TV Channel List gt To confirm press OK gt To leave the menu press EXIT Figure 7 TV Channel List gt Select the satellite which channel list should be shown with VOL Select the channel which you want to edit with PR
41. oreign substances or fluids access the receiver immediately pull out the mains plug from the socket Ask a qualified person to check the equipment before operating it once again Otherwise there is a risk of electric shock The total power consumption by the antenna connection of the receiver LNB IN must not exceed 400 mA Do not bend or crimp the mains cable Never touch the mains cable with humid hands Otherwise there is a risk of electric shock If the mains cable is damaged the receiver must be repaired by an expert before reusing it Otherwise there is a risk of electric shock Never allow children to operate the receiver or to play with the antenna unit unless supervised Always ask qualified personnel to carry out maintenance jobs Otherwise you are putting yourself and others at risk Disconnect the receiver from the power source in case of operational disruptions Never cover ventilation slits Ensure adequate ventilation EN Smart MX 04 Appropriate Usage Do not expose the apparatus to dripping or splashing Do not place water filled objects like vases on or atop of the receiver Otherwise there is a risk of electric shock Place the receiver on a stable and smooth base Avoid proximity to heat sources like e g heaters naked flames like e g candles devices with strong magnetic fields like e g loudspeakers Avoid direct sunlight and places with an extremely high amount of dust or high humidit
42. r selection with the OK Show Pay TV Channels If you have subscribed TV channels select yes with the VOL buttons and confirm your selection with OK If you select no the Pay TV channels will not be inserted in the channel list Figure 21 Pay TV channels If you have selected yes you can see the following menu page with different encrypting systems 50 EN Smart MX 04 RAPS Figure 22 Selection of encryption system gt Press the PR buttons to mark the system which is used by your Pay TV provider You will find corresponding information on your Cl module or your card In case of doubt you can select all gt Confirm your selection with OK Behind the selected encrypting system will now be a check gt To select all encrypting systems press Find To delete all checks from the list press ZOOM gt At last press the VOL Button to get to the next step Hiding Channel lists You can hide the channel lists of not subscribed Pay TV providers Figure 23 hide channel lists Smart MX 04 EN 51 RAPS Press the PR buttons to mark a list Confirm your selection with OK Behind the selected channel list will now be a check gt Repeat these steps for all channel lists which should be hidden gt Atlast press the VOL Button to get to the next step Hide Some Languages To arrange your channel list clearly you can hide the languages which are not desired en Mochten au
43. rana raaa aaa aaa UE 22 Antenna Set 6 ME 22 Single Satellite Gearch nn 26 Multi Satellite Search ee 27 TP USt EE 28 System SOU Pies awa 29 UWA EE 29 TW SY EE 31 Local Time Setting lt w wwamwmwannanananawnananwa wanawa aaazzwanzemaaanama nana kanzazanaa 34 Timer Setting EE 35 Parental Lock un ee er 38 OSD Setling u ae ee ee 40 Favorite a ee re eae an eee ae aa 41 KEE eee cid ANAE WA PE AYA CE MAA ARI MPERA NA EA EIA AZAN 42 Le EE 44 Information eee e unensa aan ii ieda aner iE aE aaa aa rii NE 44 Factory Seting seccion N 45 SatcoDX Auto Programming ii 45 SW Upgrade by OTA un ann 45 FRAPS AAA AAA NA AAA EN ent 46 Whati RAPS Tee eek 46 Install or update RAPS automatcalhy nn 47 Adjust Local TV Channel Ried EENS dd 49 Allow Erotic Channels aua 49 show Pay TV Ch nnfels 2 run ea denis 50 Hiding Channel erte ege EUREN ee 51 Hide Some Langu ges 4 een 52 Activate And Deactivate The Automatical Checking Of The RAPS List 53 Manual Updating Of The RAPS List nn 54 Change RAPS Settings Belated ae 54 4 EN Smart MX 04 Contents Games une 56 RE 56 OWO 422 Heisse es 56 Operation With The Remote Control ur u2r24000000nnnnnnnnnnnnnn anne 58 Switch The Receiver On And On 58 Change The Volume a 2s2 s0 Haan lan Hasena 58 Change The Channel cciiecincsiseeaiieiendive lee 58 Teletext ec Hedi eek erlernen deed ee 58 Electronic Program Guide 4a c
44. sblenden Figure 24 Hiding of languages gt Select yes with the VOL buttons if you want to hide some languages Confirm your selection with OK Figure 25 Selection of languages 52 EN Smart MX 04 RAPS You can now see a list of languages of the screen and you can select each language separately gt Press the PR buttons to mark a language Confirm your selection with OK The field behind the selected language will be checked now Repeat these steps for all languages with shall be hidden At last press the VOL Taste to get to the next step To select all languages press Find To delete all checks from the list press ZOOM At last press the VOL Button All Settings will now be saved Ugg Activate And Deactivate The Automatical Checking Of The RAPS List RAPS Datei Profung Figure 26 RAPS Data checking RAPS will check after each switching on if there is an updated RAPS list with modified channel data This will last about 15 seconds Press EXIT to stop the checking If you do not want to use the automatical update function act as follows gt Press MENU gt Select the menu accessories with the PR buttons Confirm your selection with OK gt f necessary insert the code IC 7 Note The default code is 0000 gt Select the menu RAPS System with the PR buttons Confirm your selection with OK Smart MX 04 EN 53 RAPS gt Select the menu
45. the left or right in the input field To add a letter press first the VOL button Then press the numeric button for the desired letter GO 4 20 EN Smart MX 04 Edit Channel Note Press Find to switch between small and capital letters You can see on the letters ABC on top of the input panel which C spelling is active Press ZOOM for deleting a figure or letter Press TXT to finish the input and show the entered channel Press Audio or EXIT to exit the dialog box gt For leaving the menu press EXIT once or repeatedly Delete gt gt gt gt Press Audio to change the channel list Press Audio again to delete a channel Select with PR the channel which you want to delete To confirm press OK Radio Channel List To select the radio channel list go to the menu Edit Channel see page 19 gt gt gt gt Select the menu point Radio channel list To confirm press OK All further functions are the same as for the TV channel list Please look under Edit Channel page 19 For leaving the menu press EXIT once or repeatedly Delete All To delete all radio channels go to the menu Edit Channel see page 19 gt G28 8 Select the point Delete All To confirm press OK Select Yes if you really want to delete all channels To confirm press OK For leaving the menu press EXIT once or repeatedly Smart MX 04 EN 21 Installation gt gt gt gt
46. the prevailing statutory regulations Never throw the batteries in normal household waste Note cs Always insert the batteries according to their polarities Batteries which are getting discharged may damage the remote control If you do not use the receiver for a longer period of time remove the batteries from the remote control Smart MX 04 EN 13 Connecting The Receiver Connecting The Receiver Attention Check that connections of all equipment and the antenna are proper before connecting the receiver to the mains TV Figure 4 connection scheme Connecting The Satellite Antenna Connect the cable of the satellite antenna with the receiver Screw the F connector of the cable to the LNB IN socket of the receiver 14 EN Smart MX 04 Connecting The Receiver Connecting The TV Set Connect your TV Set with the Scart output for TV Alternatively you can also use the connectors AUDIO L AUDIO R and VIDEO If the receiver has a modulator you can connect the RF OUT of the receiver with the antenna input of the TV Set If you want to receive programs as well via the house antenna you must connect the RF IN socket of the receiver with the antenna socket in your house When all antenna cables are connected you can select a free channel on your TV Set and start the channel search Please look for details in the user manual of your TV Set The output channel of the modulator is pre set
47. to Cancel for not saving the settings and press the OK button For leaving the menu press EXIT once or repeatedly ULLI ILL On Time To select the start up time go to the menu System Setup see on page 29 gt Select the menu point Timer Setting To confirm press OK Select the timer which you want to change or program Smart MX 04 EN 37 System Setup DL DALL D To confirm press OK Select the menu point On Time Insert the time Go to Save to safe your settings and press the OK button Go to Cancel for not saving the settings and press the OK button For leaving the menu press EXIT once or repeatedly Duration To select the duration go to the menu System Setup see on page 29 GUC Select the menu point Timer Settings To confirm press OK Select the timer which you want to change or program To confirm press OK Select the menu point Duration Insert the duration Go to Save to safe your settings and press the OK button Go to Cancel for not saving the settings and press the OK button For leaving the menu press EXIT once or repeatedly Parental Lock Figure 10 menu for setting the parental lock 38 EN Smart MX 04 System Setup To change the setting of Parental Lock go to the menu System Setup see on page 29 gt gt gt gt Select the menu point Parental Lock To confirm press OK Insert the code see page 18 For leaving the menu press EXIT once or rep
48. tup see on page 29 Select the menu point Local Time Settings To confirm press OK Select the menu point GMT Offset To confirm press OK Select the time zone for your location To confirm press OK For leaving the menu press EXIT once or repeatedly GUE GUE EY Summertime To select the summertime go to the menu System Setup see on page 29 Select the menu point Local Time Settings To confirm press OK Select the menu point Summertime Select On when time is just summertime Select Off in wintertime To confirm press OK For leaving the menu press EXIT once or repeatedly GUE Date To set the date go to the menu System Setup see on page 29 Select the menu point Local Time Settings To confirm press OK 34 EN Smart MX 04 System Setup gt Select the menu point Date gt Insert the date with the Numeric buttons 0 9 gt For leaving the menu press EXIT once or repeatedly Time To set the time go to the menu System Setup see on page 29 gt Select the menu point Local Time Settings To confirm press OK Select the menu point Time Insert the time with the Numeric buttons 0 9 For leaving the menu press EXIT once or repeatedly GQ D Timer Setting To change the timer settings go to the menu System Setup see on page 29 gt Select the menu point Timer setting To confirm press OK Select the timer which you want to program or which you want to chang
49. y Do not place any heavy objects on the receiver Humidity may settle in the receiver if is brought from cold into hot surroundings In this case please wait for about two or three hours before operating the equipment Never cover ventilation slits Ensure adequate ventilation by maintaining a safety distance of 5 cm to other objects Arrange the mains and antenna cable in such a manner that no one steps or trips over them Use the apparatus only in moderate climates not in tropical climates Correct Battery Handling Batteries may contain toxic agents Ensure that batteries are not within the reach of children Children may eat and swallow batteries Leaking batteries may cause damages at the remote control Batteries may contain toxic agents that are hazardous to the environment Therefore dispose of the batteries immediately according to the prevailing statutory regulations Never throw the batteries in normal household waste The digital satellite receiver receives digital channels in a covered area It is exclusively meant for this purpose and should only be used for the same This also includes paying attention to all information in this operating manual especially that of safety instructions Any other usage is considered to be improper and may lead to material damages and even personal injuries The manufacturer does not bear any liability for damages caused due to improper usage Smart MX 04 EN 7 Scope Of Supply
Download Pdf Manuals
Related Search