Multiglide with Handles
Contents
1. more resources means less Multiglide Materials Multiglide is made in 100 nylon There are two models A model where the top side is coated with polyurethane to prevent liquid penetration Outer surface high friction Inner surface low friction Cleaning The product should be checked regularly preferably each Washing instructions time it is used and especially after wash Do not use fabric softener as this will reduce the glide effect Check that there is no damage to seams or fabric Never try to repair a product yourself Never use a defective product Articles Article no Description Size mm IM130DR MultiGlide with handles waterproof pink strap W1300 x L800 IM160DR MultiGlide with handles waterproof lightblue strap W1600 x L800 Service Information Thank you for choosing an Etac product If the customer makes adjustments repairs or combinations not predetermined by Etac the Etac CE certification and Etac warranty will be voided Warranty Two year warranty on material and manufacturing defects provided that the product is used correctly Before taking a product in service always make a risk assesment according to national and or local legislation First inspection e Is the packaging intact e Read the label on the packaging and check the article no and product description e Check that Short Instruction is enclosed updated User Manual Instruction for use can be down2. Multiglide with Handles immedia Instruction for Use a part of Etac Illustration 1 Illustration 3 EY e 1 Illustrations NL Illustration 2 Heading Contents General Symbols Intended use Intended eNvirOMeNE ee ee ee Practical handling Notice Materials Cleaning ee Re RR AR Re ee Re ee ee Re ee Re eene Articles Combinations Service Information General Thank you for choosing an Etac product To avoid accidents and injury when moving and handling the products read the manual carefully The person described as the user in this user manual is the person who is lying or sitting on the product The as sistants are the people who manoeuvre the product This symbol appears alongside the text in the manual It draws the reader s attention to points at which there may be a risk to the health and safety of the user or assistant The products comply with the standards applicable for Class 1 products in theEuropean Council Directive MDD 93 42 EEC on medical devices Lot no Batch no x Xx x Xx X Xx X X x Xx Production year Running number At Etac we strive to improve our products all the time and therefore we reserve the right to make changes to prod ucts without prior warning All measurements given on illustrations and similar material are for guidance only and Etac cannot be held liable for errors and defects The information given in this manual inc
3. ax 704 882 0751 information snugseat com Wwww snugseat com cetac Creating possibilities
4. be EA scrapped in accordance Lt KG with national regulations Read the User Manual If in doubt please contact Etac Customer Service or local distributor for more information and guidance For more information about training and the use of these products contact the Etac transfer experts www etac com Class 1 European Council Directive MDD 93 42 EEC on medical devices Manufacture Etac Immedia A S Egeskovvej 12 DK 8700 Horsens Denmark etac immedia etac com m xport ac Immedia A S geskovvej 12 K 8700 Horsens ac immediaQetac com www etac com exp OD Om m Etac Sverige AB Box 203 334 24 Anderstorp S Tel 46 371 58 73 00 Fax 46 371 58 73 90 infoQetac se www etac se Etac AS Pb 249 1501 Moss N Tel 47 815 69 469 Fax 47 69 27 09 11 hovedkontor etac no www etac no Etac A S Egeskovvej 12 8700 Horsens DK Tel 45 79 68 58 33 Fax 45 75 68 58 40 info etac dk www etac dk Etac GMBH BahnhofstraBe 131 45770 Marl D Tel 49 236 598 710 Fax 49 236 598 6115 info etac de www etac de Etac Holland BV Fluorietweg 16a 1812RR Alkmaar NL Tel 31 72 547 04 39 Fax 431 72 547 13 05 info holland etac com www etac com R82 UK Ltd Unit D4A Coombswood Business Park East Coombswood Way Halesowen West Midlands B62 8BH UK Tel 0121 561 2222 Fax 0121 559 5437 R82ukQr82 com www r82 co Uk Snug Seat Inc 12801 E Independence Blvd P O Box 1739 Matthews NC 28106 US Tel 1 800 336 7684 F
5. ide and fold it out Then unfold the MultiGlide out respectively up down Notice Special features Always check the product before use and after washing There is a risk that the user may slide off Never leave the user alone on the edge of the bed Never use a defective product If the product shows signs of wear and tear it must be scrapped Never leave the product on the floor Read these instructions carefully Always make a risk assessment and secure that the It is important that assistants receive instruction in manual assistive product can be used at the individual user handling Etac offers advice and training for assistants j and in combination with other devices that it is safe For further information contact Etac for the user and caregivers Always use the correct manual handling techniques It is recommended that the guard rail is in place when the user is left on the glide system unless Encourage the client to assist where possible a risk assessment has found that the user can be safely left on the glide system without the need of To ensure that the client feels safe and that every manual guard rails handling is smooth always plan the manual handling in advance If in any doubt please contact Etac MultiGlide can be used either over or under a draw sheet making the draw sheet easier to pull on The choice of model depends not only on the needs but also on the user s resources As a general rule
6. loaded from www etac com or contact your Etac Customer Service or the local distributor e Check the label on the product does it include article no product description lot batch no cleaning instructions and supplier name Periodic Inspection e Make sure that your Manual transfer system always is in a perfect condition After wash always check materials stitching handles buckles e If the product shows signs of wear and tear it must be removed from service immediately Lot no Batch no 7 x x x x x x x Production year Running number te Visual inspection Check the product Stability test cat Ensure that the materials seams stitching KG Try to bend the product verify that it feels firm E handles buckles are intact faultless stable and solid Mechanical load or stress Test handles Test low high friction Draw hard in the handles in opposite directions gt Place the product on a firm surface or a bed and control the material seams and stitching SS place your hands on the material and test the Test buckles friction by pushing your hands down into the Lock the buckle and draw in opposite directions product control the buckle and the stitching Low friction slides effortlessly High friction no sliding moving Check always Manual transfer aids with handles straps and buckles Manual transfer aids for sitting and lying transfer Manual transfer aids with high or low friction The product can
7. luding recom mendations combinations and sizing does not apply to special orders and modifications If the customer makes adjustments repairs or combinations not predetermined by Etac the Etac CE certification and Etac warranty will be voided If in doubt please contact Etac Warranty Two year warranty on material and manufac turing defects provided that the product is used correctly For further information on the Etac transfer range see www etac com The product can be scrapped in accordance with national regulations Symbols Washing Iron Handwash Do not dryclean Wipe off Do not bleach Tumbledry Risk of sliding down Keep out of the sun User mass limit maximum rated load Never leave on the floor The product can be scrapped in accordance with national regulations Warning Read the User Manual Manufacturer Class 1 European Council Directive MDD 93 42 EEC on medical devices Batch no Lot no Intended use The Multiglide can be used anywhere where it is benefi cial to reduce friction at pressure points during manual handling Turning users in bed pulling them higher up in the bed getting in and out of bed etc Intended enviroment Acute care Long term care Home care Practical handling Positioning MultiGlide with handles is folded approximately every 10 cm or rolled up until there is no more material available If you wish to apply MultiGlide from the head end always
8. start by folding the end where the handle is located If you wish to apply MultiGlide from the upper legs al ways start by folding the opposite end where the handle is located The result is that the handle is ready for use at the user s thighs MultiGlide placed so that the open part facing away from user and the folded part is palced under the pillow and shoulders One can but favor be more than 2 carrers ex one to keep in the upper part and extra helpers presses palm down into the mattress One fold at a time has to be unfolded Use After placement the user can now be mobilized To turn use familiar technics To higher up in bed bend the users legs and take the handles stand in in walking position and use weight transfer to move the patient higher up and Always make a risk assessment and secure that the as sistive product can be used at the individual user and in combination with other devices that it is safe for the user and caregivers To remove Multiglide The assistant glides one hand between the two layers of sheet locates the corner on the opposite side and pulls it slowly towards him herself turning the Multiglide inside out Alternate positioning Alternative MultiGlide can be placed under the lower back Fold MultiGlide together as an accordion Then folding the folded MultiGlide again about 1 3 and pushed under the lower back to the user On the opposite side helper can now easily grab the Mul tiGl
Download Pdf Manuals
Related Search