TL-510 Optical Power Meter manual
Contents
1. Fail to turn on Replace battery No changing on Lower power Replace battery LCD screen In sensitive LCD Dirty or Use the correct screen polluted connector and connector clean it Warranty 12 months from the purchasing date Warranty clause 1 Under the warranty we would repair the problems 10 TiANLAN T amp L TECHNOLOGY CO LIMITED caused under the normal operation free of charge Note remember to show us the warranty card when repair 2 For the following situation we have to charge certain cost B WW N ed gt 6 Out of the warranty Fail to provide the warranty card Alter and omit the warranty card Wrong operation including the problem caused by human actors abnormal working environment and so on Problems or damages are not caused by the products quality Do not operate it according to this manual 3 For the following situation we do not repair it 1 2 3 Damaged seal label Take apart it without permission Products from other manufacture 11 O A O N gt T amp L TECHNOLOGY LIMITED Packing List TL 510 Optical Power Meter 1pc Soft case T ete User Manual _ 1pc Battery AAA transportation permit 3pcs Quality Certificate 1pc T amp L TECHNOLOGY LIMITED Quality Certificat2. 50nm 1300nm 1310nm 1490nm 1550nm and 1625nm other wavelength can be provided according to customer s request lt Provide absolute optical power measurement and relative power measurement lt Real time monitoring and displaying the battery level Warning notice is available when the battery is low 1 canlan T amp L TECHNOLOGY CO LIMITED Auto off function Backlight LCD display AAA batteries which is more convenient to carry User self calibration function o gt gt gt TiANLAN T amp L TECHNOLOGY CO LIMITED 3 Technical Specifications Measurement range dBm 700 10 dBm 50 26 dBm Wavelength range nm 800 1650 850nm 1300nm 1310nm 1490nm Calibrated wavelength 1550nm 1625nm other wavelength will be on request Detector InGaAs Accuracy lt 3 10dBm 22 C Linearity 0 1 Non linearity Resolution 0 01dBm Working temperature 10 Q 50 Storage temperature 20 Q 70 C Relative humidity 90 30 C Movable FC PC SC PC ST as Optional Power supply 3pcs AAA batteries Optional accessory which require connector special order DC power supply Support wide range power input work AC 90 240 Working hours 2120 hours without backlight Weight g 160g Dimension mm 130x69x29 TiANLAN T amp L TECHNOLOGY LIMITED 4 Layout Optical Power Meter 1 Wavelength Display the wavelength su
3. F or dBm W to increase or decrease the power value by 0 05d every time Until the LCD display the pigtails power Or the difference gap less than 0 3db press to save the Repeat above operation for other wavelength After recalibrate each wavelength please pull down the switch 1 come back to the position the opposition of the ON and turn off the meter End the user self calibration operation 6 5 Auto off function The auto off is on when turning on the meter Press ON OFF to activate or deactivate this function 6 6 Replace battery lt gt lt gt lt gt If the battery level is very low please turn off the unit immediately and replace the batteries Take out the batteries if not in use for a long period of time like one month NOTE do not charge the non rechargeable battery dangerous 7 Maintenance 1 Keep all optical connectors and surfaces free from oil dirt or other contamination to ensure proper operation T amp L TECHNOLOGY LIMITED 2 Keep using the same type of connector 3 Please cover the dust cap when not in use to keep the connector clean 4 Carefully plug in or out the adapter 5 Regularly clean the connector 6 Take out the battery when not in use for a period of time 8 Trouble Shootings Faint LCD screen Replace battery No backlight Lower power Replace battery No display when Lower Turn on again or turning on power other replace battery
4. TL 510 Optical Power Meter User Manual T amp L TECHNOLOGY LIMITED V1 0 T amp L TECHNOLOGY LIMITED CONTENTS Model Introductions 1 2 Features 1 3 Technical Specifications 3 ESTO eioen nassen 4 5 Function 5 6 Operation naan eenen nennen 7 8 1 NUN OM OU ee 6 2 Absolute power 6 3 Relative power measurement 6 4 User self calibration function 6 5 Auto off function nennen 6 6 Replace 7 Maintenance 9 8 Trouble Shootings 10 TiANLAN T amp L TECHNOLOGY CO LIMITED 1 Model Introductions TL 510A Measurement range 70 10dBm calibrated wavelength 850nm 1300nm 1310nm 1490nm 1550nm 1625nm TL 510B Measurement range 50 26dBm calibrated wavelength 850nm 1300nm 1310nm 1490nm 1550nm 1625nm 2 Features lt High measurement accuracy and display resolution Quick response and measurement It can display fast tracking and real time measurement of optical power when output power changes lt Wide measurement range it can provide 80dB of optical power measurement range lt Six calibrated wavelength 8
5. ch as 850nm 1300nm 1310nm 1490nm 1550nm and 1625nm 2 Power value lt Displays the current output power under absolute 4 TiANLAN T amp L TECHNOLOGY CO LIMITED test mode Displays the difference between the current output power and reference power under relative test mode 3 uW nW dBm dB 4 Battery level Indicate the current battery level When the icon is blank it means the power is too low please change the batteries 5 Auto off Activate the 10 minute auto off function 6 ON OFF 7 Wavelength select 8 REF Relative power Press REF for 2 seconds to start relative test 9 DBm w Absolute power 5 Function Keys 1 DN OFF press ON OFF to turn it on And press it for 3 seconds to turn it off Under power on mode press this key shortly to activate or deactivate the 10 minute auto off function The default setting is auto off function ON when start the meter Operators can press ON OFF shortly to close the auto off function 2 KdBm w press dBm W to enter absolute measurement mode Press it repeatly to switch the display power unit between W and dBm 3 A Switch the wavelength from 6 calibrated 5 iAnLAn T amp L TECHNOLOGY CO LIMITED wavelengths the current choice of wavelength will appears on the LCD REF press REF key to enter relative measurement mode and it has 3 working modes A Directly enter the relative measurement in absolute measurement
6. e Product name Optical Power Meter Product modell TL 510 Serial number Date of production Inspection Warranty Card Date of purchase Customer Customer address Customer phone Distributor Distributor phonel Posted back tol Fault unit return back to manufacture for repair purpose should come with the warranty card with detailed information T amp L TECHNOLOGY CO LIMITED Email zibotianlan 163 com Web www tlet com cn
7. e 1310nm to substitue 1300nm Press to choose the display unit The default wavelength is 1310nm and working mode is dBm After the above steps the LCD will show the test power value 6 3 Relative power measurement lt gt lt gt Set the wavelength Press REF for 2 seconds to enter the relative measurement mode now LCD screen display 00 00dB Measurement Insert the pigtail need to be tested 7 wAn Lan T amp L TECHNOLOGY CO LIMITED and introduce another measurement light now the current value shown in the LCD is the difference value between the tested signal and reference value The reference value shown in the Ref position Press to review the current absolute power value Press REF to review the current reference value 6 4 User self calibration function ON ON 1 2 1 2 a lib ration position Work position During the operation when operators need to calibrate the meter to be accordance with other meters So our product offers operators self calibration function the following steps will tell you how to do lt gt lt gt Take out the batteries and pull up the switch 1 to ON position Put the battery back to the battery compartment and turn on the unit to choose the wavelength for calibration TiANLAN T amp L TECHNOLOGY CO LIMITED lt gt lt gt Now connect it with a pigtail which we already know its power and press RE
8. mode press to enter the relative measurement Now the Ref value shows the previous saved power values B Save the reference value when enter the relative measurement mode press REF for 2 seconds to save the current absolute power value as REF value and show the relative power value in dB unit C Enter the relative measurement mode and save current reference value in the absolute measurement mode press REF for 2 seconds to enter the REF measurement mode and save the current value as REF value which will appears in Ref position Now the value in dB unit on the LCD and the vale means the difference value between the measurement value and REF value meanwhile the REF value will displays in the REF position Backlit is on when turning on the unit It will turn off one minute later Operators can press any key to make backlit for another one minute TiANLAN T amp L TECHNOLOGY CO LIMITED 6 Operation 6 1 Turn on off lt gt Press shortly to turn on the unit Press for a few seconds to turn it off and press this key slightly to activate or deactivate the auto off function 6 2 Absolute power measurement lt gt lt gt lt gt Insert optical signal Insert the pigtail properly turn on the meter Choose the wavelength via A key If the tested wavelength is not exactly same to the one in the power meter then choose a close one from the power meter For example 1300nm wavelength is near to 1310nm we can choos
Download Pdf Manuals
Related Search