User manual Arc Pad 48
Contents
1. Green Orange 3 Blue Green white 4 White Blue 5 Red Blue white 6 Green G 7 Blue Brown white 8 White Brown 60 W ArcPower 48 ArcPower 384 Rack Mount ArcPower 48 SmartWhite 20 C 40 C convection Luxeon Rebel 48 13 26 45 13 x 38 70 60 000 hours minimum 60 000 hours 70 C ambient 25 C IP 67 cast aluminium cast aluminium tempered glass 60 90 45 45 Chogori O8BMMA SL8001 male LiYY 8xAWG22 UL Style 2517 CSA O D 6 70mm RGBW CW WW SW 2 Important If the ArcPower 384 Rack Mount is used for control of the ArcPad 48 two rules has to be kept 1 The LEDs power limiting has to be set On at zone for which is the ArcPad 48 connected menu path Personality gt LEDs Power Limiting gt Zone Zone 8 gt On 2 The LEDs output current has to be set on 700mA at zone for which is the ArcPad 48 con nected menu path Personality gt LEDs Output Current gt Zone Zone 8 gt 700mA Breach of the rule no 1 may cause overheating of the LED module 4 Dimensions All dimensions are in mm 140 60 min 150 max 5 Accessories 1 x Connector Chogori C RBDU O8BFFA female 6 Optional Accessories Adapter cable CGRBDU 08BFFA RJ4 RJ45 L 3m No 13051630 Adapter cable CGRBDU 08BFFA RJ4 RJ45 L 7m No 13051631 Adapter cable CGRBDU 08BFFA RJ4 RJ45 L 15m No 13051682 Specif2. User instructions ArcPad 48 The product generates colored light by means of Luxeon LEDs The product was designed for exterior use and it is ideal for locations where the effect lighting is required 1 Attention During the operation the housing becomes hot up to 85 C Do not install the module near high inflammable liquids or materials Do not allow anything to rest on the module Do not install the module near the naked flames The unit is not suitable for underwater installation Do not install the module in dirty dusty or badly ventilated location Avoid using the unit in locations subject to possible impacts Avoid looking directly into the LED light beam at close range 2 Installation The ArcPad 48 unit can be arranged in any position orientation The ArcPad s head is mounted on an adjustable bracket for tilt adjustment into many positions 1 To fix the unit 1 Loosen both pan screws 1 in the fixture base etree 2 Turn the internal adjustable holder 2 to the position as shown on the picture and take it out from the base 3 Fasten the internal holder on the non flammable surface via 2 mounting holes of diameter of 9 2 mm 4 Put the base of the fixture on the internal holder 2 adjust its desired pan position and tighten both pan screws 1 Adjust suitable tilt position The ArcPpad 3 48 should be connected to the ArcPower 48 driver See the ArcPower 48
3. ications are subject to change without notice Version 1 5
4. user manual for full 1 details of mains power requirements and DMX operation Adapter cable CGRBDU O8BFFA RJ45 Connect the ArcPad 48 s cable to the ArcPower 48 via the adapter cable Chogori RJ45 The power data cable that connect the ArcPad 48 to the ArcPower48 has the following wiring Chogori O8BMMA SL8001 male Rear view LED module Pin Function Wire Red 1 Blue white 2 White Blue 3 White Brown 4 Blue Brown white 5 Blue Green white 6 Green Green 7 Green Orange s 8 Red Orange white Rear view male Adapter cable Chogori RJ45 betwen fixture and LED driver Chogori female 08BFFA SL8001 Rear view gaesss 1 ArcPower 8 Pin Function Wire Red Blue white White Blue 1 2 3 White Brown 4 Blue Brown white 5 Blue Green white 6 Green Green Rear view 7 Green Orange 8 Red Orange white 3 Technical specifications Maximum Power Consumption Comp Power Supply for RGBW version Comp Power Supply for single colour and SW version Operating Ambient Temp Range Cooling System Led device Number of LEDs Optical System Available Typical Lumen Maintenance Led Life Expectancy Operating Temperature Ingress Protection Construction Body Base Transparent cover tilt range pan range Power Data Connection plug Power Data Connection cable LED Colour Variants Pin Function Wire 1 Orange white 2
Download Pdf Manuals
Related Search