BA_4120.B
Contents
1. 8 30 PM Pull out the crown to position Il watch continues to run Turn the crown until yesterday s date appears 03 Pull out the crown to position Ill the second hand stops The display changes from alarm time to reference time o P o Turn the crown until the correct date 04 appears 8 B PF Continue to turn the crown until the uom current time 8 30 PM appears Push the crown back into position I the display changes from reference to alarm time Please note Resetting the time also requires the identical correction of the reference time Please refer to setting the reference time Please observe the AM PM clock rhythm 04 06 2014 Battery type 395 diameter 9 5mm x 2 6mm SR 927 SW X Accuracy 20 10 seconds per month2. RONDA startech Movement Cal 4120 B User s Manual English You have decided to buy a watch which was assembled by a watch maker using a Ronda movement Please note that no watches are produced or distributed under the Ronda Brand In case of repairs guarantee claims and questions concerning the functioning of a watch purchasers and consumers should contact their retailer or the watch manufacturer for which the relevant information can be found in the sales or guarantee documentation provided with the watch Alarm time Setting the alarm time Activate the setting mode Press the push button for at least 2 seconds As soon as the small minute hand jumps forward 1 minute this mode is active Setting Short pressing less than 1 second the alarm time is moved forward by the minute Long pressing longer than 2 seconds the alarm time is moved forward until the push button is released Please note If the push button is not activated for 10 seconds the setting mode of the alarm time deactivates itself At the same time 2 beeps are emitted to indicate that the alarm 05 is switched on Description of the display and control buttons Display elements Control buttons Minute hand Hour hand _ Alarm and reference time hour and minute Second hand Date 01 Alarm time Switching the alarm on off The alarm is switched on off by briefly pressing the push button 2 beep
3. eference time Activating the setting mode Press the push button for at least 2 seconds As soon as the small minute hand jumps forwards one minute this mode is active Short pressing less than 1 second the reference time is moved forwards by the minute Medium pressing 1 2 seconds the reference time is moved forwards by the hour Long pressing longer than 2 seconds the reference time is moved forwards until the push button is released Push the crown back into position the display changes from reference time to alarm time A 1 beep signal indicates that the alarm is switched off Please note The reference time must display the same time as the current time This means that resetting the current time also requires the identical correction of the reference time Afterwards the alarm time has to be reset What is the reference time The current time is displayed by means of the hour and minute hand Parallel to the current time the reference time runs in the background the alarm time refers itself to this reference time Thus resetting the time also requires the identical correction of the reference time If the reference time is not synchronised with the current time this results in the alarm signal being emitted at a different time to the set alarm time 07 Alarm time Setting the time and date Example Date time on the watch 7 1 25 AM Present date time 04
4. s alarm switched on beep alarm switched off Please note The alarm can be set maximum 12 hours before the desired alarm time Once the set alarm time has been reached a signal is emitted for 20 seconds This signal is repeated after two minutes Following brief pressing of the push button 06 the signal is immediately switched off Setting the time o Pull out the crown to position Ill the watch stops nom Turn the crown until you reach the correct time 8 45 Push the crown back into position I Please note In order to set the time to the exact second must be pulled out when the second hand is in position 60 Once the hour and minute hands have been set must be pushed back into position at the exact second Setting the date quick mode Pull out the crown to position Il the watch continues to run Turn the crown until the correct date 01 appears Push the crown back into position Please note The date of the following day must be set in the calendar changing phase between approx 9 PM and midnight Setting the date too quickly in quick mode can result in the incorrect date being displayed Switching the date between 01 and 31 position II restores the syn chronisation Reference time Setting the reference time Pull out the crown to position Ill second hand stops The display changes from alarm time to r
Download Pdf Manuals
Related Search
BA_4120.B ba 2120 bgsu ba 4110 bron aerotech