Home

DSL-322T User Manual - D-Link

Contents

1. Internet Protocol TCP IP Properties General Alternate Configuration You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Select Obtain an IP address 5 Obtain an IP address automatically automatically in the Internet Protocol Use the following IP address TCP IP Properties window Use the following DNS server addresses Preferred DNS server Alternate DNS serve Your computer is now ready to use the Modem s DHCP server 50 DSL 322T ADSL Modem User Guide Windows 2000 First check for the IP protocol and if necessary install it 1 2 3 NEN 9 In the Windows task bar click the Start button point to Settings and then click Control Panel Double click the Network and Dial up Connections icon In the Network and Dial up Connections window right click the Local Area Connection icon and then select Properties The Local Area Connection Properties dialog box displays with a list of currently installed network components If the list includes Internet Protocol TCP IP then the protocol has already been enabled skip ahead to Configure Windows 2000 for DHCP If Internet Protocol TCP IP does not display as an installed component click Install In the Select Network Component Type dialog box select Protocol and then
2. DHCP Settings window The two options for DHCP service are as follows You may use the Modem as a DHCP server for your LAN You can disable DHCP service and manually configure IP settings for workstations Follow the instructions below according to which of the above DHCP options you want to use When you have configured the DHCP Settings as you want them click the Apply button to commit the new settings Use the Modem for DHCP To use the built in DHCP server click to select the DHCP Server option if it is not already selected The IP Address Pool settings can be adjusted The Starting IP Address is the lowest available IP address default 792 168 1 2 If you change the IP address of the Modem this will change automatically to be 1 more that the IP address of the Modem 29 DSL 322T ADSL Modem User Guide The Ending IP Address is the highest IP address number in the pool Type in the Lease Time in the entry field provided This is the amount of time in seconds that a workstation is allowed to reserve an IP address in the pool if the workstation is disconnected from the network or powered off Disable the DHCP Server To disable DHCP click to select the No DHCP option and click on the Apply button Choosing this option requires that workstations on the local network must be configured manually or use another DHCP server to obtain IP settings Advanced Tools Status Help The device can be setup as a DHCP Server to distrib
3. When you successfully connect to the web manager the Home directory tab will display the Setup Wizard window You can launch the Setup Wizard from this page or use the buttons located in the left panel of the web page to view other windows used for basic configuration Click on a directory tab to view the windows available in that directory A http 192 168 1 1 cgi binAvebcm Microsoft Internet Exp ER File Edit View Favorites Tools Help a Q Back QJ x a Ce ER Search Sie Favorites QP Media La Address SI http 192 168 1 1 cgi bin webem E I y Ba Links gt Google el Cl Search E boe Check X AlfoLink ea Options 4 D Link DSL 322T ADSL Modem Advanced Tools Status Help Setup Wizard The DSL 322T is an ADSL Modem ideal for horne networking and small business networking The setup wizard will guide you to configure the DSL 322T to connect to your ISP Internet Sepia Provider The DS SR atun all tohave Internet access within e DSL 322T Click on a button to use or view the window Logout Click the Run Wizard button to launch the S Setup Wizard a WD Internet Web Manager First Time Log On All configuration and management of the Modem is done using the web based management interface pictured in the above example The configuration windows are accessed by clicking on the directory tabs Home Advanced Tools Status and Help Each tab has associated win
4. DSL 322T ADSL Modem User Guide October 2006 ESL322TEU A1G DSL 322T ADSL Modem User Guide Table Of Contents BEFORE YOU STARTE ee edd IV Installation Overview ass en a nn da au nn nannten ana ar degen iv AMA Ur E iv PACKING let iv Installation Notes 2 u a ccs dde v Installing the HS DEENEN EENHEETEN viii INTRODUCTION EE 1 Modem Description and Operation uuuuresusnnannnnnnnnnnnannnnnnnnnnnnnnnnnnnnnnnnnnannnnnnnnnnnnnnnnnnnnnannnnnnnnnnnnnnnannnnnannnnnn 1 Modem TN 1 Front Panel Display 2 2 2 2 dias 2 Rear Panel CONNECTIONS gees eege EENS 3 HARDWARE INSTALLATION ii ii 4 PoOWer ON e EE 4 Factory Reset Button BERRSERPRERHRASIEFEREEE TERRENESTEEERUERTEEEEREECEEERUERCEEEENEELEEEEUERUREEEHEEHEREREERARSEERGERTERERR FERSENEFEERERDER TEREENEFERSERSER 4 Network Connections u nn ana Eden Edel dee geed SEENEN dee 5 BASIC MODEM CONFIGURATION Hu 6 Gomputer IP Settings 2 2 2 A dee AA 6 Access the Configuration Manager ccccssccccesseeceeeseeneeeeeeeeneeeesneeseeeneaeseeeneaeseeeennaeseenseaeseeesnaeeeeseaeseenenaes 7 Lea TE 8 Wizard BE 8 WAN E 15 PPPOoE PPPOA EE 17 Static IP Address u ana dee ENEE NEEN ees 20 Bridge Modera E IO si it id dt 24 ATM Traffic Shapini ica is Ha do did iaa 26 ATM VC EE 27 ENEE EE TITLEUNTLTTTR 28 Ale le LE 29 Save Settings and Reboot EE 31 ADVANCED MODEM MANAGEMENT 2 2 222222n2222a0n00000000nnnnnnn
5. Media Interface ANSI T1 413 Issue 2 ITU G 992 1 G dmt AnnexA ITU G 992 2 G lite Annex A ITU G 994 1 G hs ITU G 992 5 Annex A IEEE 802 1d Spanning Tree TCP UDP ARP RARP ICMP RFC1058 RIP v1 RFC1213 SNMP v1 amp v2c RFC1334 PAP RFC1389 RIP v2 ADSL2 Standards e ITU G 992 3 G dmt bis Annex A e ITU G 992 4 G lite bis Annex A RFC1483 2684 Multiprotocol Encapsulation over ATM Adaptation Layer 5 AAL5 RFC1577 Classical IP over ATM RFC1661 Point to Point Protocol RFC1994 CHAP RFC2131 DHCP Client DHCP Server RFC2364 PPP over ATM RFC2516 PPP over Ethernet G dmt full rate downstream up to 8 Mbps upstream up to 1 Mbps G lite ADSL downstream up to 1 5 Mbps upstream up to 512 Kbps G dmt bis full rate downstream up to 12 Mbps upstream up to 12 Mbps ADSL full rate downstream up to 24 Mbps upstream up to 1 Mbps ADSL interface RJ 11 connector for connection to 24 26 AWG twisted pair telephone line LAN interface RJ 45 port for 10 100BASE T Ethernet connection 46 DSL 322T ADSL Modem User Guide DC Inputs Input 120V AC 60Hz Power 11 25 Watts max Consumption Operating 0 to 40 C Temperature Temperature Humidity 5 to 95 non condensing vae 2 OO 2 CE Class B FCC Class B Part 15 a CSA 950 UL 1950 IEC 60950 EN 60950 Reliability Mean Time Between Failure MTBF min 4 years 47 DSL 322T ADSL Modem User Guide Configuring IP Settings on
6. Area Connection then click Properties Network Connections File Edit View Favorites Tools Advanced Help Geek P Osea ES Folders EI Address Network Connections Name Network Tasks LAN or High Speed Internet Other Places 9 oe cr ge Status Repair Type Enabled D Control Panel Bridge Connections Create Shortcut Right click on the Local Area Sh Connection icon and select the o Properties option from the pull down menu 49 DSL 322T ADSL Modem User Guide 5 In the General tab of the Local Area Connection Properties window highlight Internet Protocol TCP IP under This connection uses the following items by clicking on it once Click on the Properties button Local Area Connection 2 Properties PIR General Authentication Advanced Connect using Sa D Link DFE 550TX 10 100 Adapter This connection uses the following items AF NWLink NetBIOS A AF NWwLink IPX SPX NetBIOS Compatible Transport Prot Internet Protocol TCP IP E Click Properties gt Properties Description Transmission Control Protocol Internet Protocol The default wide area network protocol that provides communication across diverse interconnected networks Show icon in notification area when connected 6 Select Obtain an IP address automatically by clicking once in the circle Click the OK button
7. Do not turn the Modem off while it is restarting The following window opens to indicate the DSL 322T is in the process of restarting 14 DSL 322T ADSL Modem User Guide 2 DSL 322T Microsoft Internet Explorer Restarting The system is now restarting Please wait After the system is finished restarting you will be returned to the opening page of the web manager You may now continue to configure the Modem as desired WAN To configure the Modem s basic configuration settings without running the Setup Wizard you can access the windows used to configure WAN LAN and DHCP settings directly from the Home directory To access the WAN Settings window click on the WAN link button on the left side of the first window that appears when you successfully access the web manager 15 DSL 322T ADSL Modem User Guide Advanced Tools Status Help ATM YC Setting PVC Pvco VPI ls vol las virtual Circuit Enabled Y WAN Settings Please selecte the appropriate options to connect to your ISP PPPoE PPPoA Choose this option if your ISP uses PPPoE PPPoA For most DSL users O Static IP Address Choose this option to set static IP information provided to you by your ISP O Bridge Mode Choose this option if your ISP uses Bridge Mode PPPoEIPPPoA User Name lusemame Password cono AC Name Service Name Connection Type PPPoELLe MTU 11400 bytes MRU 11492 bytes Default Route Enabled gt IP Con
8. Wired network connections are provided through the ADSL port and the Ethernet port on the back of the Modem See the Rear Panel diagram above and the illustrations below for examples Connect ADSL Line Use the ADSL cable included with the Modem to connect it to a telephone wall socket or receptacle Plug one end of the cable into the ADSL port RJ 11 receptacle on the rear panel of the Modem and insert the other end into the RJ 11 wall socket If you are using a low pass filter device follow the instructions included with the device or given to you by your service provider The ADSL connection represents the WAN interface the connection to the Internet It is the physical link to the service provider s network backbone and ultimately to the Internet Connect Modem to Ethernet The Modem may be connected to a single computer or Ethernet device through the 10 100 BASE TX Ethernet port on the rear panel Any connection to an Ethernet concentrating device such as a switch or hub must operate at a speed of 10 100 Mbps only When connecting the Modem to any Ethernet device that is capable of operating at speeds between 0 100Mbps be sure that the device has auto negotiation NWay enabled for the connecting port Use Category 5 or better twisted pair Ethernet cable with RJ 45 connectors The RJ 45 port on the Modem is auto MDI X MDI II meaning that is will link correctly with either MDI II through or MDI X crossed ports The rules governing Ethernet
9. Your Computer In order to configure your system to receive IP settings from the Modem it must first have the TCP IP protocol installed If you have an Ethernet port on your computer it probably already has TCP IP protocol installed If you are using Windows XP the TCP IP is enabled by default for standard installations Below is an illustrated example of how to configure a Windows XP system to automatically obtain IP settings from the Modem Following this example is a step by step description of the procedures used on the other Windows operating systems to first check if the TCP IP protocol has been installed if it is not instructions are provided for installing it Once the protocol has been installed you can configure the system to receive IP settings from the Modem For computers running non Windows operating systems follow the instructions for your OS that configure the system to receive an IP address from the Modem that is configure the system to be a DHCP client use these instructions later to change the IP settings for the other computers However you cannot use the same IP address since every computer must have its own IP address that is unique on the local network y If you are using this Modem to provide Internet access for more than one computer you can Note Configure Windows XP for DHCP Use the following steps to configure a computer running Windows XP to be a DHCP client 1 From the Start menu on your desktop go to C
10. be required You can print out the two pages below and use the tables to list this information This way you have a hard copy of all the information needed to setup the Modem If it is necessary to reconfigure the device all the necessary information can be easily accessed Be sure to keep this information safe and private Low Pass Filters Since ADSL and telephone services share the same copper wiring to carry their respective signals a filtering mechanism may be necessary to avoid mutual interference A low pass filter device can be installed for each telephone that shares the line with the ADSL line These filters are easy to install passive devices that connect to the ADSL device and or telephone using standard telephone cable Ask your service provider for more information about the use of low pass filters with your installation Operating Systems The DSL 322T uses an HTML based web interface for setup and management The web configuration manager may be accessed using any operating system capable of running web browser software including Windows 98 SE Windows ME Windows 2000 and Windows XP Web Browser Any common web browser can be used to configure the Modem using the web configuration management software The program is designed to work best with more recently released browsers such as Opera Microsoft Internet Explorer version 6 0 Netscape Navigator version 6 2 3 or later versions The web browser must have JavaScript enable
11. cable lengths apply to the LAN to Modem connection Be sure that the cable connecting the LAN to the Modem does not exceed 100 meters DSL 322T ADSL Modem User Guide 3 Basic Modem Configuration The first time you setup the Modem it is recommended that you configure the WAN connection using a single computer connected directly to the Modem Once the WAN connection is functioning properly you may continue to make changes to Modem configuration including IP settings and DHCP setup For information on how to configure advanced features such as port redirection filtering and firewall please skip ahead to the Advanced Modem Management section on page 32 Configuration Summary 1 Connect to the Modem To configure various settings used by the Modem for Internet and access it is first necessary to access the Modem s management HTML based interface This is done using an ordinary web browser Your computer must be able to see the Modem before it can manage it using a browser If the Modem is in the same neighborhood or subnet as the Modem you should be able to access the management software Therefore you must first make sure your computer has IP settings that place it in the same subnet as the Modem The easiest way to make sure your computer has the correct IP settings is to configure it to use the DHCP server in the Modem The DHCP server will automatically enable your computer to use a browser to manage the Modem The next sectio
12. click Add Select Internet Protocol TCP IP in the Network Protocols list and then click OK You may be prompted to install files from your Windows 2000 installation CD or other media Follow the instructions to install the files If prompted click OK to restart your computer with the new settings Configure Windows 2000 for DHCP 1 2 5 In the Control Panel double click the Network and Dial up Connections icon In Network and Dial up Connections window right click the Local Area Connection icon and then select Properties In the Local Area Connection Properties dialog box select Internet Protocol TCP IP and then click Properties In the Internet Protocol TCP IP Properties dialog box click the button labeled Obtain an IP address automatically Double click OK to confirm and save your changes and then close the Control Panel Your computer is now ready to use the Modem s DHCP server 51 DSL 322T ADSL Modem User Guide Windows 95 and Windows 98 First check for the IP protocol and if necessary install it 1 7 In the Windows task bar click the Start button point to Settings and then click Control Panel Double click the Network icon The Network dialog box displays with a list of currently installed network components If the list includes TCP IP and then the protocol has already been enabled skip to Configure IP Information Windows 95 98 If TCP IP does not display as an installed
13. clients This may not be available to all ADSL accounts ATM Service Category UBR Y PCR kbps SCR kbps CDYT uSeconds MBS Cells ATM Settings for WAN Connection Additional ATM settings for PPPoE or PPPoA connections ATM Parameters Description The ATM settings allow the user to adjust ATM Quality of Service QoS or traffic parameters to suit specific traffic requirements For applications or circumstances where packet loss or packet delay are a concern ATM QoS can be adjusted to minimize problems For most accounts it will not be necessary to change these settings Altering QoS settings can adversely affect performance of some commonly used Internet applications If you plan to change QoS or traffic parameters contact your ISP or network services provider for information on what types of adjustment are available or possible for your account Your ISP may not support the class of service you want to use To adjust ATM QoS parameters select one of the Service Categories listed Service Category here and type in the PCR value in the entry field below For the VBR service category an additional parameter SCR must also be defined UBR Unspecified Bit Rate this is the default category used for general purpose Internet traffic where normal levels of packet loss and delay are acceptable CBR Constant Bit Rate usually used in circumstances where very low packet loss and very low Cell Delay Variable CD
14. configured the DSL 322T with the settings you desire make sure you save those settings To save the system configuration settings click the Tools tab You will be presented first with the Administrator Settings window This window is described in the next chapter To save the current configuration click the System button to view the System Settings window pictured here Home Advanced System Settings The current system settings can be saved as a file onto the local hard drive Save Settings To Local Hard Drive Load Settings From Local Hard Drive Browse J Note The system has to be restarted after the configuration is restored Save Settings and Reboot the System Save and Reboot Restore To Factory Default Settings System Settings window To save the settings you have configured click the Save and Reboot button under Save Settings and Reboot the System 31 DSL 322T ADSL Modem User Guide 4 Advanced Modem Management DSL 322T ADSL Modem Home d Tools Status Hel ATM VCC The ADSL Configuration page allows the user to set the configuration for ADSL protocol Modulation Type ADSL2 Multi Mode k This chapter introduces and describes the management features that have not been presented in the previous chapter These include the more advanced features used for network management and security as well as administrative tools to manage the Modem view statistics and other
15. information used to examine performance and for troubleshooting Use your mouse to click the directory tabs and window buttons in order to display the various configuration and read only windows discussed below The table below summarizes again the directories and windows available in the management web interface In this chapter you will find descriptions for the windows located in the Advanced Tools and Status directories oO oO o Apply Cancel Help Directory Home Advanced Tools Status Help Configuration and Read only Menus Click the Home tab to access the Setup Wizard as well as configuration windows for WAN LAN and DHCP See the previous chapter for a description of the Home directory windows Click the Advanced tab to access the ADSL Configuration and ATM VC Setting windows Click the Tools tab to access the Administrator Settings used to set the system user name and password backup and load settings Time Remote Log Settings System Settings Firmware Upgrade and Diagnostic Test windows The Save and Reboot feature is located on the System Settings window Click the Status tab to view the Device Information View Log Traffic Statistics and ADSL Status windows The Help window presents links to pages that explain various functions and services provided by the Modem 32 DSL 322T ADSL Modem User Guide ADSL This window allows the user to set the configuration for ADSL pr
16. 99 FAX 7 095 744 0099 350 URL www dlink ru China No 202 C1 Building Huitong Office Park No 71 Jianguo Road Chaoyang District Beijing 100025 China TEL 86 10 58635800 FAX 86 10 58635799 URL www dlink com cn Taiwan 2F No 119 Pao Chung Rd Hsin Tien Taipei Taiwan TEL 886 2 2910 2626 FAX 886 2 2910 1515 URL www dlinktw com tw Headquarters 2F No 233 2 Pao Chiao Rd Hsin Tien Taipei Taiwan TEL 886 2 2916 1600 FAX 886 2 2914 6299 URL www dlink com tw DSL 322T ADSL Modem User Guide 57
17. IPLLC UBR kbps kbps uSeconds Cells vaso Apply Cancel Help For Bridged connections it will be necessary for most users to install additional software on any computer that will the Modem for Internet access The additional software is used for the purpose of identifying and verifying your account and then granting Internet access to the computer requesting the connection The connection software requires the user to enter the User Name and Password for the ISP account This information is stored on the computer not in the Modem WAN Settings window Bridge Mode Follow the instructions below to configure a Bridged connection for the WAN interface To configure a Dynamic IP Address connection perform the steps listed below Some of the settings do not need to be changed the first time the device is set up but can be changed later if you choose See the table below for a description of all the settings available in this menu 24 8 DSL 322T ADSL Modem User Guide Click the Bridge Mode radio button in the WAN Settings section in the middle of the window The settings under ATM VC Setting at the top of the window should not be changed unless you have been instructed to change them However if you are instructed to change the VPI or VCI values type in the values assigned for your account Leave the Virtual Circuit setting at the default Enabled value for now Under the Bridge Mode heading choose the Connection
18. SL 322T ADSL Modem User Guide System Once you have configured the Modem to your satisfaction it is a good idea to back up the configuration file to your computer To save the current configuration settings to your computer click the System button in the Tools directory to display the System Settings window Click the Save button to Save Settings to Local Hard Drive You will be prompted to select a location on your computer to put the file The file type is xml HTML and may be named anything you wish To load a previously saved configuration file click the Browse button and locate the file on your computer Click the Load button to Load Settings From Local Hard Drive Confirm that you want to load the file when prompted and the process is completed automatically The Modem will reboot and begin operating with the configuration settings that have just been loaded Home Advanced The current system settings can be saved as a file onto the local hard drive Save Settings To Local Hard Drive Save Load Settings From Local Hard Drive L Browse Note The system has to be restarted after the configuration is restored Save Settings and Reboot the System Save and Reboot Restore To Factory Default Settings System Settings window Restore Factory Default Settings To reset the Modem to its factory default settings click the Restore button in the System Settings window You will be prompted to confirm
19. Setup Wizard For Bridge Mode connections 1 Select the specific Connection Type from the drop down menu The available Bridge Mode connection and encapsulation types are 1483 Bridged IP LLC and 1483 Bridged IP VC Mux 2 If you are instructed to change the VPI or VCI value type in the correct setting in the available entry fields Most users will not need to change these settings The Internet connection cannot function if these values are incorrect 3 Click Next to go to the next window and complete the Setup Wizard 3 DSL 322T Microsoft Internet Explorer D Link Badr wrverts ra Prats Setting Bridge Mode Enter the bridge information provided to you by your ISP Click Next to continue VPI 8 vel 35s Connection Type 1483 Bridged IP LLC 39 Exi 13 DSL 322T ADSL Modem User Guide Using the Setup Wizard Finish and Restart Finally you can confirm that the setup process is completed If you are satisfied that you have entered all the necessary information correctly click the Restart button to save the new configuration settings and restart the Modem If you need to change settings from a previous window click the Back button 3 DSL 322T Microsoft Internet Explorer D Link Beading weverts for Pract Setup Completed The Setup Wizard has completed Click on Back to modify changes or mistakes Click Restart to save the current settings and reboot the DSL 3227 990 Back Restart Exit CAUTION
20. Type from the pull down menu This defines both the connection type and encapsulation method used for your ADSL service The available options are 1483 Bridged IP LLC and 1483 Bridged IP VC Mux If you have not been provided specific information for the Connection Type leave the default setting Most users will not need to change ATM settings If this is the first time you are setting up the ADSL connection it is recommended that you leave the Service Category settings at the default values until you have established the connection See the table on page 26 for a description of the parameters available for ATM traffic shaping When you are satisfied that all the WAN settings are configured correctly click the Apply button The new settings must be saved and the Modem must be restarted for the settings to go into effect To save and reboot the Modem click on the Tools directory tab and then click System Next click the Save and Reboot button in the lower half of the System Settings window Click OK when the following Save and restart dialog box opens Microsoft Internet Explorer 2 J Save and restart i Cancel The Modem will save the new settings and restart Upon restarting the Modem will automatically establish the WAN connection 25 DSL 322T ADSL Modem User Guide ATM Traffic Shaping The ATM settings section in the WAN Settings windows for the different connection types can be used to adjust QoS parameters for ADSL
21. UTION The Modem must be used with the power adapter included with the device To power on the Modem 1 Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Modem and plug the adapter into a suitable nearby power source 2 You should see the Power LED indicator light up and remain lit The Status LED should light solid green and begin to blink after a few seconds 3 If the Ethernet port is connected to a working device check the Ethernet Link Act LED indicators to make sure the connection is valid The Modem will attempt to establish the ADSL connection if the ADSL line is connected and the Modem is properly configured this should light up after several seconds If this is the first time installing the device some settings may need to be changed before the Modem can establish a connection Factory Reset Button The Modem may be reset to the original factory default settings by depressing the reset button for a few seconds while the device is powered on Use a ballpoint or paperclip to gently push down the reset button Remember that this will wipe out any settings stored in flash memory including user account information and LAN IP settings The device settings will be restored to the factory default IP address 192 168 1 1 and the subnet mask is 255 255 255 0 the default management Username is admin and the default Password is admin DSL 322T ADSL Modem User Guide Network Connections
22. V are desirable VBR Variable Bit Rate usually used when network traffic is characterized by bursts of packets at variable intervals and some moderate packet loss and delay is acceptable This category is typically used for audio and video applications such as teleconferencing The network must support QoS Class 2 to use VBR Peak Cell Rate is inversely related to the time interval between ATM cells It PER is specified for all three service categories UBR CBR and VBR in Kbps Sustainable Cell Rate is defined for the VBR service category This is the SCR rate that can be sustained for bursty on off traffic sources It is a function of Maximum Burst Size MBS and the time interval between cells 26 DSL 322T ADSL Modem User Guide Cell Delay Variation Tolerance is a measure of the cell clumping CDVT phenomenon by which cells are delayed in the network and are negotiated Increasing the CDVT creates greater bucket depth Maximum Burst Size is the maximum number of bytes that can be sent MBS continuously from the source to the destination dropping any packets Some ATM providers set the MBS and CDVT very low and adjust up if problems occur ATM VC Setting ATM VC settings can be configured for all connection types in the WAN Setting windows of the Home directory PYC YPI VC Virtual Circuit 8 35 Enabled ze ATM VC Setting in WAN Settings window The table below describes the ATM VC
23. ay be done through the local or external interface to test connectivity to known IP addresses The diagnostics feature executes a series of tests of your system software and hardware connections Use this window when working with your ISP to troubleshoot problems Home Advanced Status Help Diagnostic Test The diagnostics feature executes a series oftest of your system software and hardware connections Use the feature when working with your ISP to troubleshoot problems Virtual Circuits PYCO OAM Type F4 Y This Page is used for performing diagnostics on the system Testing Connectivity to modem Testing Ethernet LAN connection PASS Testing ADSL Connection Testing ADSL Synchronization KS FAIL Testing Network Connection Testing ATM OAM segment ping SKIPPED Testing ATM OAM end to end ping SKIPPED Help Diagnostic Test window 40 DSL 322T ADSL Modem User Guide Status Use the various read only windows to view system information and monitor performance Device Info Use this window to quickly view basic current information about the LAN and WAN interfaces and device information including Firmware Version and MAC address D Link Building Networks for People DSL 322T ADSL Modem Home Advanced Tools Help Device Information Firmware Version W3 00B01T01 EU 20060221 LAN Log MAC Address 00 e0 b0 c0 00 ff r IP Address 192 168 1 1 Statistics Subnet Mask 255 255 255 0 f DHCP Server Ena
24. bled ADSL WAN x Virtual Circuit PYCO Connection Type pppoe IP Address NIA Subnet Mask NIA DNS Server NIA Help Device Information window 41 DSL 322T ADSL Modem User Guide Log The system log displays chronological event log data Use the navigation buttons to view or scroll log pages You may also save a simple text file containing the log to your computer Click the Save Log button and follow the prompts to save the file Home Advanced Tools Help View Log View Log displays the activities occurring on the DSL 322T Help page 1 of 1 Time Message View Log window Click Clear Log delete the current log information 42 Statistics DSL 322T ADSL Modem User Guide Use this window to monitor traffic on the Ethernet ADSL or USB Internet connection Select the interface for which you want to view packet statistics and the information will appear below Ethernet O ADSL O UsB Transmit Home Traffic Statistics Advanced Tools Choose an interface to view your network status Traffic Statistics display Receive and Transmit packets passing through the DSL 322T Display Receive and Transmit packages through Ethernet Display Receive and Transmit packages through ADSL Display Receive and Transmit packages through USB Good Rx Frames Good Rx Broadcast Frames Good Tx Multicast Frames Rx Total Bytes CRC Errors Undersized Frames Overruns Good Rx Frames Goo
25. cable to your PC before completing the below steps The CD ROM shipped with the Modem contains the USB driver software Insert the DSL 322T CD ROM into the CD drive Within a few seconds you should see a window that offers the following options Install DSL 322T Quick Install Guide View Manaual Install Acrobat Reader and Exit If you do not see this auto run pop up window explore the CD ROM and double click the setup application file autorun exe or find the file Setup exe in the folder labeled USBDRIVER and double click it to launch the installation software The auto run USB driver setup must be completed before connecting the modem to your PC with the USB cable To install the driver follow these instructions 1 Click the Install DSL 322T link in the to launch the USB driver installation software D Link DSLs InstallShield Wizard xl Welcome to the InstallShield Wizard for D Link DSLs The InstallShield Wizard will install D Link DSLs on your computer To continue click Next Back Next gt Cancel 2 Click Next on the InstallShield window D Link DSLs InstallShield Wizard a xj Ready to Install the Program The wizard is ready to begin installation Click Install to begin the installation If you want to review or change any of your installation settings click Back Click Cancel to exit the wizard InstallShield lt Back Install Cancel viii DSL 322T ADSL Modem User Gui
26. component click Add The Select Network Component Type dialog box displays Select Protocol and then click Add The Select Network Protocol dialog box displays Click on Microsoft in the Manufacturers list box and then click TCP IP in the Network Protocols list box Click OK to return to the Network dialog box and then click OK again You may be prompted to install files from your Windows 95 98 installation CD Follow the instructions to install the files Click OK to restart the PC and complete the TCP IP installation Configure Windows 95 and Windows 98 for DHCP Oy elt pe she 7 Open the Control Panel window and then click the Network icon Select the network component labeled TCP IP and then click Properties If you have multiple TCP IP listings select the listing associated with your network card or adapter In the TCP IP Properties dialog box click the IP Address tab Click the Obtain an IP address automatically option Double click OK to confirm and save your changes You will be prompted to restart Windows Click Yes When it has restarted your computer is ready to use the Modem s DHCP server Windows ME First check for the IP protocol and if necessary install it 1 2 3 4 E In the Windows task bar click the Start button point to Settings and then click Control Panel Double click the Network and Dial up Connections icon In the Network and Dial up Connections window right click the Network
27. d JavaScript is enabled by default on many browsers Make sure JavaScript has not been disabled by other software such as virus protection or web user security packages that may be running on your computer USB Port or Ethernet Port NIC Adapter Any computer that uses the Modem must be able to connect to it through either the Ethernet port or USB port on the Modem The easiest method of installation is via the Ethernet connection and therefore requires that your computer be equipped with an Ethernet port as well Most notebook computers are now sold with an Ethernet port already installed Likewise most fully assembled desktop computers come with an Ethernet NIC adapter as standard equipment If your computer does not have an Ethernet port and you do not wish to use a USB connection you must install an Ethernet NIC adapter before you can use the Modem If you must install an adapter follow the installation instructions that come with the Ethernet NIC adapter Additional Software For a bridged connection the information needed to make and maintain the Internet connection is stored on another computer or gateway device using PPP client or similar third party client software not in the Modem itself If your ADSL service is delivered through a PPPoE PPPoA or Static IP connection the information needed to establish and maintain the Internet connection can be stored in the Modem In this case it is not necessary to install software on your compu
28. d Rx Broadcast Frames Good Tx Multicast Frames Rx Total Bytes CRC Errors Undersized Frames Overruns Help 750 1 0 458730 0 0 0 Traffic Statistics window Click Refresh to view traffic information 43 DSL 322T ADSL Modem User Guide ADSL Use this window and the Diagnostic Test window Tools gt Test for troubleshooting the ADSL connection Home ADSL Status Advanced Tools ADSL Firmware Version ADSL status shows the ADSL physical layer status Help 5 00 04 00 5 00 03 00 5 00 03 00 Annex A 01 07 2b 0 52 44 ADSL Software Version v3 00B01T01 EU 20060221 Line State Disconnected Modulation NO_MODE Annex Mode ANNEX_A Max Tx Power 38 dBmiHz Item Downstream Upstream Unit SNR Margin 0 0 dB Line Attenuation 0 0 dB Data Rate 0 0 kbps Help ADSL Status window DSL 322T ADSL Modem User Guide Help D Link Building Networks for People DSL 322T Home Advanced Status Home e Setup Wizard e WAN Settings e LAN Settings e DHCP Server Advanced e ADSL Configuration e ATM VCC Tools e Administrator Settings Time Remotelog System Settings Firmware Upgrade Test Status e Device Information e Log e Statistics e ADSL Help window Click the desired hyperlink to access helpfiles 45 DSL 322T ADSL Modem User Guide Technical Specifications ADSL Standards Standards Protocols Data Transfer Rate
29. d installations Instructions for configuring your computer to receive IP settings from the Modem are provided in Appendix B on page 48 For computers running non Windows operating systems follow the instructions for your OS that configure the system to receive an IP address from the Modem that is configure the system to be a DHCP client If you are not sure how to configure your Windows computer to be a DHCP client see GE Configuring IP Settings on Your Computer beginning on page 48 DSL 322T ADSL Modem User Guide Access the Configuration Manager In order to make sure your computer s IP settings allow it to communicate with the Modem it is advisable to configure your system be a DHCP client that is it will get IP settings from the Modem Appendix B describes how to configure different Windows operating systems to Obtain IP settings automatically Be sure that the web browser on your computer is not configured to use a proxy server in the Internet settings In Windows Internet Explorer you can check if a proxy server is enabled using the following procedure 1 In Windows click on the Start button and go to the Control Panel 2 In the Control Panel window click on the Network and Internet Options icon 3 In the Network and Internet Connections window click the Internet Options icon 4 In the Internet Properties window click on the Connections tab and click on the LAN Settings button 5 Verify that the Use a
30. de 3 Click Install to begin the installation D Link DSLs InstallShield Wizard InstallShield Wizard Complete The InstallShield Wizard has successfully installed D Link DSLs Click Finish to exit the wizard lt Back Finish Cancel 4 Click Finish to complete the InstallShield wizard When the USB driver has been installed insert one end of the USB cable included with the Modem into the DSL 322T Modem s USB port Insert the other end of the USB cable into a USB port on your PC Connect the power adapter to the power input at the back panel of the DSL 322T and then plug the other end of the power adapter to a wall outlet or power strip On the front of the device the Power LED will turn ON to indicate proper operation Insert the telephone cable included with the Modem into the ADSL port and then connect the cable to your telephone line Check the LED display on the front of the Modem to confirm that the connections have been made DSL 322T ADSL Modem User Guide Introduction This section provides a brief description of the Modem its associated technologies and a list of Modem features Modem Description and Operation The DSL 322T Modem is designed to provide a simple and cost effective ADSL Internet connection for a private Ethernet network The Modem combines high speed ADSL Internet connection and IP routing for the Local Area Network LAN connectivity in one package The Modem is easy to install and
31. dow buttons in the left hand panel of the web interface Basic setup of the Modem can be completed in the windows accessed from the Home directory including Setup Wizard WAN Internet LAN to configure the IP address of the Modem and DHCP Wizard To use the Setup Wizard click the Run Wizard button in the first browser window and follow the instructions in the pop up window that appears DSL 322T ADSL Modem User Guide The initial window summarizes the setup process Click the Next button to proceed You may stop using the Setup Wizard at any time by clicking the Exit button If you exit the wizard you will return to the opening Setup Wizard window without saving any of the settings changed during the process Welcome to the DSL 322T Setup Wizard The Wizard will guide you through these three quick steps Begin by clicking on Next Step 1 Set Internet connection Step 2 Restart The first window of the Setup Wizard lists the basic steps in the process These steps are as follows 1 Configure the connection to the Internet 2 Save the new configuration settings and reboot the system DSL 322T ADSL Modem User Guide Using the Setup Wizard Choose Connection Type Now select the Connection Type used for the Internet connection Your ISP has given this information to you The connection types available for Multi User Mode are PPPoE PPPoA Static IP Address and Bridge Mode Each connection type has different setti
32. e Modem in a location that permits an easy view of the LED indicators on the front panel The LED indicators on the front panel include Power Status ADSL Ethernet and USB The ADSL Ethernet and USB indicators monitor link status and activity Link Act Power Status ADSL Ethernet Link Act Link Act Steady green light indicates the unit is powered on When the device is powered off this remains dark steady green after the POST the system has failed and the device should be rebooted Steady green light indicates a valid ADSL connection This will light after the ADSL Link Act ADSL negotiation process has been settled A blinking green light indicates activity on the WAN ADSL interface A solid green light indicates a valid link on startup This light will blink when Ferner A ACE there is activity currently on the Ethernet port A Steady green light indicates a valid USB connection A blinking green light USB Link Act indicates activity on the USB interface Lights steady green during power on self test POST Once the connection status has been settled the light will blink green If the indicator lights DSL 322T ADSL Modem User Guide Rear Panel Connections All cable connections to the Modem are made at the rear panel Connect the power adapter here to power on the Modem Use the Reset button to restore the settings to the factory default values in the next chapter for instructions on using the reset button C
33. ent 2 Install the hardware connect the cables to the device and connect the power adapter 3 Check the IP settings on your computer and change them if necessary so the computer can access the web based software built into the Modem 4 Use the web based management software to configure the device to suit the requirements of your ADSL service and private Ethernet network Setup Wizard Once you access the web interface use the Setup Wizard to configure your Internet connection For instructions on how to configure the Internet connection with the Setup Wizard read the section entitled Wizard later in this manual after you have configured your computer s IP settings to connect to the Modem Packing List Open the shipping carton and carefully remove all items Make sure that you have the items listed here e One DSL 322T ADSL Modem e One CD ROM containing the User s Guide e One twisted pair telephone cable used for ADSL connection e One straight through Ethernet cable e One USB cable e One AC power adapter suitable for your electric service e One Quick Installation Guide DSL 322T ADSL Modem User Guide Installation Notes In order to establish a connection to the Internet it will be necessary to provide information to the Modem that will be stored in its memory For some users only their account information Username and Password is required For others various parameters that control and define the Internet connection will
34. figure the WAN port as an Unnumbered IP interface See table below for Unnumbered IP Most users will not need to change ATM settings If this is the first time you are setting up the ADSL connection it is recommended that you leave the Service Category settings at the default values until you have established the connection See the table on page 26 for a description of the parameters available for ATM traffic shaping When you are satisfied that all the WAN settings are configured correctly click on the Apply button To save and reboot the Modem click on the Tools directory tab and then click System Next click the Save and Reboot button in the lower half of the System Settings window Click OK when the following Save and restart dialog box opens 17 DSL 322T ADSL Modem User Guide Microsoft Internet Explorer 2 jJ Save and restart j Cancel 13 The Modem will save the new settings and restart Upon restarting the Modem will automatically establish the WAN connection The following provides additional description of the settings for PPPoA and PPPoE connections PPPoA PPPoE Parameters User Name Password AC Name Service Name Connection Type MTU MRU Default Route IP Control Description For PPP connections a User Name and Password are used to identify and verify your account to the ISP Enter the User Name for your ADSL service account User names and passwords are case sensit
35. gn a global IP Address subnet mask and gateway IP Address used for the WAN connection Follow the instruction below to configure the Modem to use Static IP Address assignment for the WAN connection To configure a Static IP address connection perform the steps listed below Some of the settings do not need to be changed the first time the device is set up but can be changed later if you choose See the table below for a description of all the settings available in this window 20 DSL 322T ADSL Modem User Guide Advanced Tools Status Help ATM VC Setting PVC Pvco VPI ls vel as Virtual Circuit Enabled ze WAN Settings Please selecte the appropriate options to connect to your ISP OPPPoE PPPoA Choose this option if your ISP uses PPPoE PPPOoA For most DSL users Static IP Address Choose this option to set static IP information provided to you by your ISP O Bridge Mode Choose this option if your ISP uses Bridge Mode Static IP Connection Type 11483 Routed ELL Y IP Address 0000 Subnet Mask Gateway Address d Primary DNS Address 168 95 1 1 Secondary DNS Address Lo MTU 1400 bytes ATM Service Category UBR m PCR kbps SCR keps CDYT Fees uSeconds MBS Cells 980 Apply Cancel Help WAN Settings window Static IP Address To configure a Static IP connection for the WAN follow these steps 1 Click the Static IP Address radio button in the WAN Settings section in the middle of the w
36. hen you are satisfied that all the WAN settings are configured correctly click on the Apply button 8 To save and reboot the Modem click on the Tools directory tab and then click System Next click the Save and Reboot button in the lower half of the System Settings window 9 Click OK when the following Save and restart dialog box opens Microsoft Internet Explorer 2 j Save and restart Cancel 10 The Modem will save the new settings and restart Upon restarting the Modem will automatically establish the WAN connection The following provides additional description of the settings for Static IP Address connections Static IP Parameters Description Connection Type This specifies the connection type and the encapsulation method used for your Static IP Address connection The options available are 1483 Routed IP LLC and 1483 Routed IP VC Mux IP Address This is the permanent global IP address for your account This is the address that is visible outside your private network Get this from your ISP Subnet Mask This is the Subnet mask for the WAN interface Get this from your ISP Gateway Address This is the IP address of your ISP s Gateway modem It provides the connection to the Modem for IP routed traffic that is outside your ISP s network That is this will be the primary connection from the Modem to 22 Primary DNS Address Secondary DNS Address MTU DSL 322T ADSL Modem User Guide mos
37. icon and then select Properties The Network Properties dialog box displays with a list of currently installed network components If the list includes Internet Protocol TCP IP then the protocol has already been enabled Skip ahead to Configure Windows ME for DHCP If Internet Protocol TCP IP does not display as an installed component click Add In the Select Network Component Type dialog box select Protocol and then click Add Select Microsoft in the Manufacturers box Select Internet Protocol TCP IP in the Network Protocols list and then click OK You may be prompted to install files from your Windows Me installation CD or other media Follow the instructions to install the files 10 If prompted click OK to restart your computer with the new settings Configure Windows ME for DHCP St sr e E Ze In the Control Panel window double click the Network and Dial up Connections icon In the Network and Dial up Connections window right click the Network icon and then select Properties In the Network Properties dialog box select TCP IP and then click Properties In the TCP IP Settings dialog box click the Obtain and IP address automatically option Double click OK twice to confirm and save your changes and then close the Control Panel window 52 DSL 322T ADSL Modem User Guide Your computer is now ready to use the Modem s DHCP server Windows NT 4 0 Workstations First check for the IP protocol and if necessar
38. ide Tools Click the Tools tab to reveal the window buttons for various functions located in this directory Administrator Settings is the first window that appears in the Tools directory This window is used to change the system password used to access the web manager to save or load Modem configuration settings and to restore default settings The functions in this and the other Tools windows are described below Admin D Link DSL 322T ADSL Modem Home Advanced Status Help Administrator Settings There is only one account that can access the DSL 322T s Web Management interface Time Administrator The Login Name is admin New Password Remotelog Confirm Password System WebPort 80 Firmware Test Logout oO oO Apply Cancel Help Administrator Settings window To change the password used to access the Modem web manager click the Admin button in the Tools directory to display the Administrator Settings window Type the New Password and Confirm Password to be certain you have typed it correctly Click the Apply button to activate the new password The system User Name remains admin This cannot be changed using the web manager interface Be sure to save the new setting 35 DSL 322T ADSL Modem User Guide Time The Modem provides a number of options to maintain current date and time Home Advanced Status Help Time Set the DSL 322T system time L
39. indow 21 DSL 322T ADSL Modem User Guide 2 The settings under ATM VC Setting at the top of the window should not be changed unless you have been instructed to change them However if you are instructed to change the VPI or VCI values type in the values assigned for your account Leave the Virtual Circuit setting at the default Enabled value for now 3 Under the Static IP heading choose the Connection Type from the pull down menu This defines both the connection type and encapsulation method used for your ADSL service The available options are Routed IP LLC and Routed IP VC Mux If you have not been provided specific information for the Connection Type leave the default setting 4 Change the IP Address Subnet Mask Gateway Address and if available Secondary DNS Address as instructed by your ISP These are the global IP settings for the WAN interface This is the visible IP address of your account Your ISP should have provided these IP settings to you 5 Leave the MTU value at the default setting default 7400 unless you have specific reasons to change this see table below 6 Most users will not need to change ATM settings If this is the first time you are setting up the ADSL connection it is recommended that you leave the Service Category settings at the default values until you have established the connection See the table on page 26 for a description of the parameters available for ATM traffic shaping 7 W
40. it any IP address scheme the user desires This address will be the base IP address used for DHCP service on the LAN when DHCP is enabled This is the subnet mask used by the DSL 322T and will be used throughout your LAN The default subnet mask is 255 255 255 0 This can be changed later LAN Subnet Mask for the DSL 322T Information you will need about your LAN or computer If your computer has an Ethernet NIC you can Record info here connect the DSL 322T to this Ethernet port using an Ethernet NIC Ethernet cable You can also use the Ethernet ports on the DSL 322T to connect to other computer or Ethernet devices Your DSL 322T ADSL Modem is configured by default to be a DHCP server This means that it can assign an IP address subnet mask and a default gateway address to computers on your LAN The DHCP Client status default range of IP addresses the DSL 322T will assign are from 192 168 1 2 to 192 168 1 254 Your computer or computers needs to be configured to Obtain an IP address automatically that is they need to be configured as DHCP clients It is recommended that your collect and record this information here or in some other secure place in case you have to re configure your ADSL connection in the future Once you have the above information you are ready to setup and configure your DSL 322T ADSL Modem vii DSL 322T ADSL Modem User Guide Installing the USB Driver IMPORTANT Do not connect the USB
41. ive so enter this information exactly as given to you by your ISP Together with the User Name this is used to verify your account to the ISP Enter the Password exactly as given to you by your ISP AC Name is optional for most users Please contact your ISP if you are uncertain whether an AC Name is required Service Name is optional for most users Please contact your ISP if you are uncertain whether a Service Name is required This specifies the protocol PPPoE or PPPoA and the encapsulation method LLC or VC Mux used for your connection The options available are PPPoE LLC PPPoA LLC or PPPoA VC Mux The Maximum Transmission Unit size may be changed if you want to optimize efficiency for uploading data through the WAN interface The default setting 1400 bytes should be suitable for most users Some user may want to adjust the setting to optimize performance for wireless traffic or when low latency is desired such as with Internet gaming It is highly recommended that the user research how adjusting the MTU may affect network traffic for better or worse Similar to the MTU except this applies to Maximum Received Unit size for downloading data Most users will be happy with the default setting 1492 bytes However this may also be optimized for fast downloads of general bulk Internet traffic for low latency or for downloading to computers on the Wireless LAN As with the MTU setting the user should carefully consider how changi
42. k House Kurla Bandra Complex Road Off CST Road Santacruz East Mumbai 400098 India TEL 91 022 26526696 56902210 FAX 91 022 26528914 URL www dlink co in Middle East Dubai P O Box 500376 Office 103 Building 3 Dubai Internet City Dubai United Arab Emirates Tel 971 4 3916480 Fax 971 4 3908881 URL www dlink me com Turkey Ayazaga Maslak Yolu Erdebil Cevahir Is Merkezi 5 A Ayazaga Istanbul Turkiye TEL 90 212 289 56 59 FAX 90 212 289 76 06 URL www dlink com tr Egypt 19 El Shahed Helmy El Masri Al Maza Heliopolis Cairo Egypt TEL 202 414 4295 FAX 202 415 6704 URL www dlink me com Israel 11 Hamanofim Street Ackerstein Towers Regus Business Center P O B 2148 Hertzelia Pituach 46120 Israel TEL 972 9 9715700 FAX 972 9 9715601 URL www dlink co il LatinAmerica Isidora Goyeechea 2934 Ofcina 702 Las Condes Santiago Chile TEL 56 2 232 3185 FAX 56 2 232 0923 URL www dlink cl Brazil Av das Nacoes Unidas 11857 14 andar cj 141 142 Brooklin Novo Sao Paulo SP Brazil CEP 04578 000 Zip Code TEL 55 11 21859300 FAX 55 11 21859322 URL www dlinkbrasil com br South Africa Einstein Park II Block B 102 106 Witch Hazel Avenue Highveld Technopark Centurion Gauteng Republic of South Africa TEL 27 12 665 2165 FAX 27 12 665 2186 URL www d link co za Russia Grafsky per 14 floor 6 Moscow 129626 Russia TEL 7 095 744 00
43. lankuja 7A 8rd floor FIN 0150 10 Vantaa Finland TEL 358 9 2707 5080 FAX 358 9 2707 5081 URL www dlink fi D Link International Offices Spain C Sabino De Arana 56 Bajos 08028 Barcelona Spain TEL 34 93 4090770 FAX 34 93 4910795 URL www dlink es Portugal Rua Fernando Pahla 50 Edificio Simol 1900 Lisbon Portugal TEL 351 21 8688493 URL www dlink es Czech Republic Vaclavske namesti 36 Praha 1 Czech Republic TEL 420 603 276 589 URL www dlink cz Switzerland Glatt Tower 2 0G CH 8301 Glattzentrum Postfach 2 0G Switzerland TEL 41 0 1 832 11 00 FAX 41 0 1 832 11 01 URL www dlink ch Greece 101 Panagoulis Str 163 43 Helioupolis Athens Greece TEL 30 210 9914 512 FAX 30 210 9916902 URL www dlink gr Luxemburg Rue des Colonies 11 B 1000 Brussels Belgium TEL 32 0 2 517 7111 FAX 32 0 2 517 6500 URL www dlink be Poland Budynek Aurum ul Walic w 11 PL 00 851 Warszawa Poland TEL 48 0 22 583 92 75 FAX 48 0 22 583 92 76 URL www dlink pl Hungary R k ezi t 70 72 HU 1074 Budapest Hungary TEL 36 0 1 461 30 00 FAX 36 0 1 461 30 09 URL www dlink hu Singapore 1 International Business Park 03 12 The Synergy Singapore 609917 TEL 65 6774 6233 FAX 65 6774 6322 URL www dlink intl com Australia 1 Giffnock Avenue North Ryde NSW 2113 Australia TEL 61 2 8899 1800 FAX 61 2 8899 1868 URL www dlink com au India D Lin
44. n describes how to change the IP configuration for a computer running a Windows operating system to be a DHCP client If you are running another operating system make sure your computer is configured as a DHCP client so it can automatically obtain IP settings from the Modem Some operating systems will automatically select the best IP settings Consult the user manual for the operating system OS if you are unsure 2 Configure the Internet WAN Connection Most users will be able to complete this process using the Setup Wizard The Setup Wizard can be launched once you have successfully connected with the Modem s management software There are different methods used to establish the WAN connection to the service provider s network and ultimately to the Internet Your Modem may already have most of the settings configured by default However you will probably at least have to type in a user name and password given to you by your ISP You may also need to know the encapsulation and connection type required to use for your ADSL service Your service provider should provide all the information needed to configure the WAN connection Computer IP Settings In order to configure your system to receive IP settings from the Modem your computer must first have the TCP IP protocol installed If you have an Ethernet port on your computer it probably already has TCP IP protocol installed If you are using Windows XP the TCP IP is enabled by default for standar
45. ng the MRU may affect Internet downloads for all systems on your LAN When this is Enabled the Modem will be considered to be the primary gateway to the Internet and WAN for systems on your network If you are using the Modem on a network with one or more alternative gateway modems you may prefer to disable this if you will use another modem as the primary gateway This is used to determine how global IP settings are handled for the WAN interface Typically PPPoE or PPPoA connections will use the default setting for Dynamic IP Some users will be given a specific IP address for the WAN interface In this case you need to change this setting to Static P When Static IP is selected in the IP Control pull down menu you need to type in the global IP address provided to you by your ISP The P Unnumbered option is used if you want to set up a 18 DSL 322T ADSL Modem User Guide non TCP IP port protocol link through the WAN interface An IP Unnumbered interface does not have an IP address and therefore cannot be managed via Telnet or any other TCP IP application Static IP If you have selected the Static P option in the IP Control pull down menu type in the global IP address used for your WAN interface Your ISP should provide this IP address to you 19 DSL 322T ADSL Modem User Guide Static IP Address When the Modem is configured to use Static IP Address assignment for the WAN connection you must manually assi
46. ngs that are configured in the next window of the Setup Wizard 3 DSL 322T Microsoft Internet Explorer D Link Bad weven tar Prost Select Internet Connection Type WAN Select the connection type to connectto your ISP Click Next to continue PPPoEIPPPoA Choose this option if your ISP uses PPPoE PPPoA For most DSL users Static IP Address Choose this option to set static IP information provided to you by your ISP O Bridge Mode Choose this option if your ISP uses Bridge Mode 999 Back Next Exit Select the Connection Type specific to your service and click Next to go to the next Setup Wizard window Follow the instructions below for the type of connection you have selected 10 DSL 322T ADSL Modem User Guide Using the Setup Wizard For PPPoE PPPoA connections 1 Type in the Username and Password used to identify and verify your account to the ISP 2 Select the specific Connection Type from the drop down menu The available PPP connection and encapsulation types are PPPoE LLC PPPoA LLC and PPPoA VC Mux 3 If you are instructed to change the VPI or VCI value type in the correct setting in the available entry fields Most users will not need to change these settings The Internet connection cannot function if these values are incorrect 4 Click Next to go to the next window and complete the Setup Wizard Set PPPoE PPPoA Enter the PPPOE PPPOA information provided to you by your ISP Click Next to con
47. nnnnnnnnnnnnnnn nun nennen 32 ADE ii 33 Lal Ree 34 Jpolo Eeo EE E E E EE EE E EE AEA E EA E E E 35 PRIN aaiae EES EES EES EES EES ES odes 35 UU 36 Remote LOG EE 37 ST 38 lu 39 KT EA 40 Dra AE EAA A T EE 41 BEA EA a e AE a a E E A E E E E E E E 41 DO e Ee 42 KEE EE 43 ADSL BEE 44 el NN CEET 45 TECHNICAL SPECIFICATIONS ci cota ia 46 CONFIGURING IP SETTINGS ON YOUR COMPUTER cccccseccseecceeseeeeeneseceseeeeeeneees 48 LOW PASS FILTERS FOR DSE see iii isc 54 DSL 322T ADSL Modem User Guide About This User Guide This user s guide provides instructions on how to install the DSL 322T ADSL Modem and use it to provide Internet access for an Ethernet network or single computer If you are using a computer with a functioning Ethernet port the quickest and easiest way to set up the DSL 322T is to insert the Installation CD into the CD ROM drive of your computer and follow the instructions provided in the Quick Installation Guide Before You Start Please read and make sure you understand all the prerequisites for proper installation of your new Modem Have all the necessary information and equipment on hand before beginning the installation Installation Overview The procedure to install the Modem can be described in general terms in the following steps 1 Gather information and equipment needed to install the device Before you begin the actual installation make sure you have all the necessary information and equipm
48. ntifier VPI is used in conjunction with the Virtual Channel Identifier VCI to identify the data path between your ADSL service provider s network and your computer This setting can be changed in the WAN window of the web manager Default value 8 Most users will not be required to change this setting The Virtual Channel Identifier VCI used in conjunction with the VPI to identify the data path between your ADSL service provider s network and your computer This setting can be changed in the WAN window of the web manager Default value 35 The Setup Wizard can be used to configure the Internet connection for most users vi DSL 322T ADSL Modem User Guide Information you will need about your DSL 322T ADSL Modem Record info here This is the Username needed access the Modem s management interface When you attempt to connect to the device through a web browser you will be prompted to enter this Username The default Username for the Modem is admin The user cannot change this This is the Password you will be prompted to enter when you access the Modem s management interface The default Password is admin The user may change this Password This is the IP address you will enter into the Address field of your web browser to access the Modem s configuration graphical user interface GUI using a LAN IP addresses for web browser The default IP address is 192 168 1 1 the DSL 322T This may be changed to su
49. ocal Time 01 01 2005 12 23 04 Synchronize the modem s clock with Your computer s clock Manual Enter your own settings Date ec zi Jus Time las L la vago Apply Cancel Help Time window To configure system time on the Modem select the method used to maintain time The options available include using your computers system clock default or setting the time and date manually Click the Apply button to set the system time 36 DSL 322T ADSL Modem User Guide Remote Log Use this window to set up logging to servers or computers that are located outside the LAN or subnet of the Modem Home Advanced Status Help Log Level Notice v Add an IP Address l Add Selecta logging destination None Y Apply Cancel Remote Log Settings window Select the Log Level from the pull down menu The levels available are Alert Critical Debug Error Info Notice Panic and Warning Type in the IP address of a receiver for the log message in the Add an IP Address field and click on the Add button Log message receivers that are added appear listed in the Select a logging destination pull down menu These may be used at any time for other types of log messages To remove a log message receiver from the list select it and click on the Remove button Click the Apply button when you have configured the log message receivers Remember to save the settings to non volatile memory 37 D
50. onnect network cables 1 Insert the ADSL telephone cable into the ADSL port and then connect the cable to your telephone line 2 Insert one end of the Ethernet cable into the Ethernet LAN port on the back panel of the Modem and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer Ethernet 9VAC 1A Ethernet Port Power Insert ADSL Port Use the Ethernet port Use the adapter Use the ADSL cable to to connect the Modem shipped with the connect to the your telephone to your Ethernet LAN Modem to connect to line RJ 11 port or computer power source USB Port Reset Button Connect USB cable here To manually reset depress and install USB driver button with the power on for at least seven seconds DSL 322T ADSL Modem User Guide Hardware Installation The DSL 322T maintains three separate interfaces an ADSL an Ethernet and a USB interface Place the Modem in a location where it can be connected to the various devices as well as to a power source The Modem should not be located where it will be exposed to moisture or excessive heat Make sure the cables and power cord are placed safely out of the way so they do not create a tripping hazard As with any electrical appliance observe common sense safety procedures The Modem can be placed on a shelf or desktop ideally you should be able to see the LED indicators on the front if you need to view them for troubleshooting Power on Modem CA
51. ontrol Panel ae yr Quen B Dew g geng BR 48 DSL 322T ADSL Modem User Guide 2 In the Control Panel window click Network and Internet Connections E Control Panel Ele Edit view Favorites Tools Help QO O B ser Es Folders FE Address Control Panel P control Panel S Pick a category Switch to Classic View 1 Printers and Other Hardware e Appearance and Themes 2 Network and Internet Connectior e User Accounts Connections Click Network and Internet k D E Add or Remove Programs 3 Date Time Language and Regional id Options 7 Y Sounds Speech and Audio Devices Accessibility Options Performance and Maintenance 3 In the Network and Internet Connections window click Network Connections amp Network and Internet Connections File Edit view Favorites Tools Help QO O B Osea Es Folders F Address G Network and Internet Connections See Also Network and Internet Connections My Network Places a ers se Other Pick a task Remote Desktop Be Phone and Modem Options B Set up or change your Internet connection B Create a connection to the network at your workplace Troubleshooters d B Set up or change your home or small office network 2 Home or Small Office Networking Se or pick a Control Panel icon Click Network Connections J Internet uptions m Network Connection 4 Inthe Network Connections window right click on Local
52. otocols For most ADSL accounts the default setting ADSL2 Multi mode will work This configuration works with all ADSL implementations If you have been given instructions to change the Modulation Type used select the desired option from the drop down menu and click the Apply button Home Tools Status Help ADSL Configuration The ADSL Configuration page allows the user to set the configuration for ADSL protocol Modulation Type ADSL2 Multi Mode 7 v oO Apply Cancel Help ADSL Configuration window 33 DSL 322T ADSL Modem User Guide ATM VCC This ATM Virtual Circuit connection window is used to configure the WAN connection The window can be used as an alternative to configuring the same settings found on the WAN Settings windows in the Home directory Tools Status Hel ii G in 1 PVC PYCO VPI e vc 2 Virtual Circuit Enabled Y WAN Setting Bridge Mode v Connection Type 11483 Bridged IP LLC EN Apply Cancel Help ATM VCs List ID PVC VPI VC Connection Type Virtual Circuit Bridge Mode Enabled E ATM VC Setting window To configure the PVC configuration set click the corresponding notepad icon in the right hand column of the ATM VCs List The PVCs current settings appear above in the entry fields of the ATM VC Setting window Configure the appropriate settings and click the Apply button to put the new settings into effect 34 DSL 322T ADSL Modem User Gu
53. ount with your ISP See the table below for more information about the optional settings AC Name and Service Name Choose the Connection Type from the pull down menu located under the User Name and Password entry fields This defines both the connection protocol and encapsulation method used for your ADSL service The available options are PPPoA VC Mux PPPoA LLC and PPPoE LLC If you have not been provided specific information for the Connection Type setting leave the default setting Leave the MTU value at the default setting default 7400 unless you have specific reasons to change this see table below Leave the MRU value at the default setting default 7492 unless you have specific reasons to change this see table below Leave the Default Route enabled if you want to use the Modem as the default route to the Internet for your LAN Whenever a computer on the LAN attempts to access the Internet the Modem becomes the Internet gateway to the computer If you have an alternative route for Internet traffic you may disable this without effecting the Modem s connection Typically the globally IP settings i e IP address for the WAN interface for a PPPoA or PPPoA connection will use Dynamic IP assignment from the ISP Some accounts may be assigned a specific global IP address If you have been give an IP address for you PPPoE PPPoA connection select the Static IP option from the IP Control pull down menu This menu can be used to con
54. proxy server for your LAN These settings will not apply to dial up or VPN connections option is NOT checked If it is checked click in the checked box to deselect the option and click OK Alternatively you can access this Internet Options menu using the Tools pull down menu in Internet Explorer Login to Home Page To use the web based management software launch a suitable web browser and direct it to the IP address of the Modem Type in http followed by the default IP address 192 168 1 1 in the address bar of the browser The URL in the address bar should read http 192 168 1 1 A dialog box prompts for the User Name and Password Type in the default User Name admin and the default Password admin then click the OK button to access the web based manager Connect to 192 168 1 1 Please enter your user name and password on DSL 322T User name admin Password ossos C Remember my password Enter Password dialog box You should change the web based manager access user name and password once you have verified that a connection can be established The user name and password allows any PC within the same subnet as the Modem to access the web based manger ADSL account user name and password needed for PPPoE PPPoA connections to access the Note Internet wu i The user name and password used to access the web based manager is NOT the same as the DSL 322T ADSL Modem User Guide Home
55. r Guide C Low Pass Filters for DSL Most ADSL clients will be required to install a simple device that prevents the ADSL line from interfering with regular telephone services These devices are commonly referred to as microfilters or low pass filters The two basic styles of low pass filters commonly used are described below In Line Filter In line low pass filters are used for each telephone or telephone device answering machines Faxes etc that shares the line with the ADSL service These devices are attached to the telephone cable between the telephone and wall jack Filters that install behind the wall plate hidden from view are also available A typical in line filter installation is shown in the diagram below Phone Jack ADSL Microfilter Phone In line low pass filter 54 DSL 322T ADSL Modem User Guide Three Port Filter Another style of filter is installed at the same point where the Modem connects to the telephone line Only a single filter is required The connection ports are typically labeled as follows e Line This port connects to the wall jack e ADSL This port connects to the Modem e Phone This port connects to a telephone or other telephone device The diagram below illustrates the proper use of this style of filter Make certain the lines are properly connected If you are unable to hear a dial tone with the telephone check the connections to make sure they are securely attached and connected
56. red to as Private settings You may change the LAN IP address if needed IP Address 1192 168 1 1 Subnet Mask 255 255 255 0 090 Apply Cancel Help Management IP window To change the IP Address or Subnet Mask type in the desired values and click the Apply button Your web browser should automatically be redirected to the new IP address You will asked to login again to the Modem s web manager 28 DSL 322T ADSL Modem User Guide DHCP The DHCP server is enabled by default for the Modem s Ethernet LAN interface DHCP service will supply IP settings to workstations configured to automatically obtain IP settings that are connected to the Modem though the Ethernet port When the Modem is used for DHCP it becomes the default gateway for DHCP client connected to it Keep in mind that if you change the IP address of the Modem the range of IP addresses in the pool used for DHCP on the LAN will also be changed The IP address pool can be up to 253 IP addresses Advanced Tools Status Help The device can be setup as a DHCP Serverto distribute IP addresses to the LAN network Choose this option The IP address must be manually assigned at O No DHCP each device connected to DSL 322T Choose this option to setup as a DHCP server to distribute IP DHCP Server addresses to the LAN network DHCP Starting IP Address 1192 168 1 2 Ending IP Address 1192 168 1 254 Lease Time 60 seconds 90 Apply Cancel Help
57. settings used to configure a PPPoE or PPPoA connection for an ADSL account ATM VC Parameters PVC VPI VCI Virtual Circuit Description The Modem supports a single connection only The Virtual Path Identifier is used with the VCI to define a dedicated circuit on the ATM network portion of the connection to the Internet and WAN Most users will not need to change this setting The Virtual Channel Identifier is used with the VPI to define a dedicated circuit on the ATM network portion of the connection to the Internet and WAN Most users will not need to change this setting Pvco is Enabled by default 27 DSL 322T ADSL Modem User Guide LAN You can configure the LAN IP address to suit your preference Many users will find it convenient to use the default settings together with DHCP service to manage the IP settings for their private network The IP address of the Modem is the base address used for DHCP In order to use the Modem for DHCP on your LAN the IP address pool used for DHCP must be compatible with the IP address of the Modem The IP addresses available in the DHCP IP address pool will change automatically if you change the IP address of the Modem See the next section for information on DHCP setup To access the Management IP window click the LAN button in the Home directory Advanced Tools Status Help These are the IP settings of the LAN interface for the DSL 322T These setting may be refer
58. t of the Internet Get this IP address from your ISP This is the IP address of the first choice for Domain Name Service DNS used to match the named URL web address used by most browsers with the actual global IP address used for a web server Usually this will be a server owned by the ISP Get this IP address from your ISP This is the second choice for a DNS server Get this IP address from your ISP The Maximum Transmission Unit size may be changed if you want to optimize efficiency for uploading data through the WAN interface The default setting 2400 bytes should be suitable for most users Some user may want to adjust the setting to optimize performance for wireless traffic or when low latency is desired such as with Internet gaming It is highly recommended that the user research how adjusting the MTU may affect network traffic for better or worse 23 DSL 322T ADSL Modem User Guide Bridge Mode AIR FC Setti PYC VPI vol Virtual Circuit WAN Settings PPPoEIPPPoA Bridge Mode PCR SCR CDYT MBS Connection Type Service Category Advanced Tools Status Help OH PYCO 8 Enabled e Please selecte the appropriate options to connect to your ISP Choose this option if your ISP uses PPPoE PPPoA For most DSL users Static IP Address Choose this option to set static IP information provided to you by your ISP Choose this option if your ISP uses Bridge Mode 1483 Bridged
59. ter It may however be necessary to change some settings in the device including account information used to identify and verify the connection A If you plan to use the DSL 322T s USB port to connect to your computer do not connect the USB cable to the Modem until you have finished all of the steps to install the USB driver and your computer has restarted DSL 322T ADSL Modem User Guide Information you will need from your ADSL service provider This is the Username used to log on to your ADSL service Record info here provider s network It is commonly in the form user isp co uk Your ADSL service provider uses this to identify your account This is the Password used in conjunction with the Username Password above to log on to your ADSL service provider s network This is used to verify the identity of your account These settings describe the method your ADSL service provider uses to transport data between the Internet and your computer Most users will use the default settings You may need to specify one of the following WAN Setting and Connection Type configurations Connection Type settings listed in parenthesis WAN So PPPOE PPOA PPPoE LLC PPPoA LLC or PPPoA VC Mux el in Bridge Mode 1483 Bridged IP LLC or 1483 Bridged IP VC Mux Static IP Address 1483 Routed IP LLC 1483 Routed IP VC Mux Default PPPoE PPPoA PPPoE LLC Most users will not be required to change this setting The Virtual Path Ide
60. tinue User Name username Password e VPI 8 VC 35 Connection Type PPPoE LLC v 99 Exi 11 DSL 322T ADSL Modem User Guide Using the Setup Wizard For Static IP Address connections 1 Select the specific Connection Type from the drop down menu The available Static IP Address connection and encapsulation types are 1483 Routed IP LLC and 1483 Routed IP VC Mux Change the IP Address Subnet Mask ISP Gateway Address Primary DNS Address and Secondary DNS Server IP Address as instructed by your ISP For IPoA connections it may also be necessary to change the ARP Server Address IPoA connection users who have not been given this information should leave the field blank If you are instructed to change the VPI or VCI value type in the correct setting in the available entry fields Most users will not need to change these settings The Internet connection cannot function if these values are incorrect Click Next to go to the next window and complete the Setup Wizard 3 DSL 322T Microsoft Internet Explorer Set Static IP Address Enter the static IP information provided to you by your ISP Click Next to continue VPI VC IP Address Subnet Mask ISP Gateway Address ARP Server Address 0 0 0 0 Primary DNS Address 168 95 1 1 Secondary DNS Address Connection Type 1483 Routed IPLLC J 99 Exi 12 DSL 322T ADSL Modem User Guide Using the
61. to the correct port Phone Jack Line Splitter ADSL Device 3 port Filter 55 U S A 17595 Mt Herrmann Street Fountain Valley CA 92708 TEL 1 800 326 1688 URL www dlink com Canada 2180 Winston Park Drive Oakville Ontario L6H 5W1 Canada TEL 1 905 8295033 FAX 1 905 8295223 URL www dlink ca Europe U K 4th Floor Merit House Edgware Road Colindale London NW9 5AB U K TEL 44 20 8731 5555 FAX 44 20 8731 5511 URL www dlink co uk Germany Schwalbacher Strasse 74 D 65760 Eschborn Germany TEL 49 6196 77990 FAX 49 6196 7799300 URL www dlink de France No 2 all ee de la Fresnerie 78330 Fontenay le Fleury France TEL 33 1 30238688 FAX 33 1 30238689 URL www dlink fr Netherlands Weena 290 3012 NJ Rotterdam Netherlands Tel 31 10 282 1445 Fax 31 10 282 1331 URL www dlink nl Belgium Rue des Colonies 11 B 1000 Brussels Belgium Tel 32 0 2 517 7111 Fax 32 0 2 517 6500 URL www dlink be Italy Via Nino Bonnet n 6 b 20154 Milano Italy TEL 39 02 2900 0676 FAX 39 02 2900 1723 URL www dlink it Sweden P O Box 15036 S 167 15 Bromma Sweden TEL 46 0 8564 61900 FAX 46 0 8564 61901 URL www dlink se Denmark Naverland 2 DK 2600 Glostrup Copenhagen Denmark TEL 45 43 969040 FAX 45 43 424347 URL www dlink dk Norway Karihaugveien 89 N 1086 Oslo Norway TEL 47 99 300 100 FAX 47 22 30 95 80 URL www dlink no Finland Pakka
62. trol Dynamic IP v Static IP Connection Setting Always ON Recommended Connection will close if idle for Connection On Demand i inutes Om Use Connect Disconnect button in anna Status Device Info page only ATM Service Category UBR e PCR kbps SCR kbps CDVT uSeconds MBS Cells oO oO Oo Apply Cancel Help WAN Settings window PPPoE PPPoA 16 DSL 322T ADSL Modem User Guide PPPoE PPPoA Follow the instructions below to configure the Modem to use a PPPoE or PPPoA for the Internet connection Make sure you have all the necessary information before you configure the WAN connection To set up a PPPoE or PPPoA connection 1 12 If not already selected click the PPPoE PPPoA radio button in the WAN Settings section in the middle of the window PPPoE PPPOA is selected by default if you are configuring the Modem for the first time The settings under ATM VC Setting at the top of the window should not be changed unless you have been instructed to change them However if you are instructed to change the VPI or VCI values type in the values assigned for your account Leave the Virtual Circuit setting at the default Enabled value for now Under the PPPoE PPPoA heading type the User Name and Password used for your ADSL account A typical User Name will be in the form user1234 isp co uk The Password may be assigned to you by your ISP or you may have selected it when you set up the acc
63. use The DSL 322T connects to an Ethernet LAN or computers via standard Ethernet ports The ADSL connection is made using ordinary telephone line with standard connectors ADSL Asymmetric Digital Subscriber Line ADSL is a broadband network technology that utilizes standard twisted pair copper wire telephone lines to enable broadband high speed digital data transmission and bandwidth hungry applications for business and residential customers ADSL modems and modems provide faster downloads and more reliable connectivity to the user without loss of quality or disruption of voice fax telephone capabilities ADSL service operates at speeds of up to 24 Mbps downstream and up to 1 Mbps upstream A secure dedicated point to point connection is established between the user and the central office of the service provider Modem Features The DSL 322T ADSL Modem utilizes the latest ADSL enhancements to provide a reliable Internet portal suitable for most small to medium sized offices DSL 322T advantages include e Data rates up to 24 Mbps for downstream and 1Mbps for upstream e Friendly web based graphical user interface for configuration and management e Supports most ADSL ADSL2 and ADSL2 standards e Auto handshake and rate adaptation for different ADSL flavors e Widest range of DSLAM interoperability e Built in MIBs for SNMP management e Upgradeable firmware through HTTP DSL 322T ADSL Modem User Guide Front Panel Display Place th
64. ute IP addresses to the LAN network Choose this option The IP address must be manually assigned at No DHCP each device connected to DSL 322T Choose this option to setup as a DHCP server to distribute IP O DHCP Server addresses to the LAN network oO oO Oo Apply Cancel Help DHCP Settings window with DHCP disabled If you configure IP settings manually make sure to use IP addresses in the subnet of the Modem You will need to use the Modem s IP address as the Default Gateway for the workstation in order to provide Internet access Internet Protocol TCP IP Properties General You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Obtain an IP address automatically Use the following IP address IP address Subnet mask Default gateway Use the following DNS server addresses Preferred DNS server 168 SCHT Alternate DNS server 172 gt 10 39 menu and select the Use the following IP address option You will need to supply the IP Note address subnet mask and default gateway use the IP address of the DSL 322T for each workstation The example here also uses manually configured DNS settings Y To manually configure IP settings on Windows workstations open the TCP IP Properties 30 DSL 322T ADSL Modem User Guide Save Settings and Reboot When you have
65. y install it DD Ka 8 In the Windows NT task bar click the Start button point to Settings and then click Control Panel In the Control Panel window double click the Network icon In the Network dialog box click the Protocols tab The Protocols tab displays a list of currently installed network protocols If the list includes TCP IP then the protocol has already been enabled Skip to Configure IP Information If TCP IP does not display as an installed component click Add In the Select Network Protocol dialog box select TCP IP and then click OK You may be prompted to install files from your Windows NT installation CD or other media Follow the instructions to install the files After all files are installed a window displays to inform you that a TCP IP service called DHCP can be set up to dynamically assign IP information Click Yes to continue and then click OK if prompted to restart your computer Configure Windows NT 4 0 for DHCP u gt A ne Open the Control Panel window and then double click the Network icon In the Network dialog box click the Protocols tab In the Protocols tab select TCP IP and then click Properties In the Microsoft TCP IP Properties dialog box click the Obtain an IP address automatically option Click OK twice to confirm and save your changes and then close the Control Panel window Your computer is now ready to use the Modem s DHCP server 53 DSL 322T ADSL Modem Use
66. your decision to reset the Modem The Modem will reboot with the factory default settings including IP settings 192 168 1 1 and Administrator password admin 38 DSL 322T ADSL Modem User Guide Firmware A Performing a Firmware Upgrade can sometimes change the configuration settings Be Note sure to back up the Modem s configuration settings before upgrading the firmware Use this window to load the latest firmware for the device Note that the device configuration settings may return to the factory default settings so make sure you save the configuration settings with the System Settings window described above Home Advanced Status Help There may be new firmware for your DSL 322T to improve functionality and performance To upgrade the firmware locate the upgrade file on the local hard drive with the Browse button Once you have found the file to be used clickthe Apply button below to start the firmware upgrade Current Firmware Version 3 00601701 U 20060221 Note The system has to be restarted after the firmware upgrade 90 Apply Cancel Help Firmware Upgrade window To upgrade firmware type in the name and path of the file or click on the Browse button to search for the file Click the Apply button to begin copying the file The file will load and restart the Modem automatically 39 DSL 322T ADSL Modem User Guide Test This window is used to test connectivity of the Modem A Ping test m

Download Pdf Manuals

Related Search

Related Contents

SoftBank 102P 取扱説明書    Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page    Modelo AV-72-RF  電動式骨手術器械購入事業仕様書（PDF  DV-RW250S Operation-Manual FR  

Copyright © All rights reserved. Failed to retrieve file