sensor manual and specifications
Contents
1. lt Input socket Sensor cable with locating F Ultraviolet lt arrows facing 1 Sensor upwards e Hold the Ultraviolet Sensor housing with the Smart Q label showing on the top e Push one end of the sensor cable supplied with the EASYSENSE unit into the socket on the Sensor with the locating arrow on the cable facing upwards e Connect the other end of the sensor cable to the input socket on the EASYSENSE unit with the locating arrow facing upwards e The EASYSENSE unit will detect that the Ultraviolet Sensor is connected and display values using the currently selected range If the range is not suitable for your investigation set to the correct range To set the range e Connect the Ultraviolet Sensor to the EASYSENSE unit ait tures X e Start the EASYSENSE program and select one of the logging modes from the Home page e g EasyLog Select Sensor Config from the Settings menu Select Range e Select the Ultraviolet Sensor from the list it will be listed using its current range and click on the Change Range button coal SN e The current range will be highlighted Select the required range and click on OK e Close Sensor Config Click on New and then Finish for the change in range to be detected by the logging mode Sensor 2 500m rr Fast ED The range setting will be retained until changed by the user With some EASYSENSE units it is p2. mainly by ozone Also called actinic radiation Actinic radiation since the high photon energy of the radiation induces chemical Burning rays processes including changes in biological systems photo biological systems which can induce cancer This band is the primary danger to humans UV A band 315 400 nm UV A penetrates the Earth s atmosphere readily 99 of the near UV ultraviolet that reaches the Earth s surface is UV A In general this is the least harmful band of UV but with high exposure can Tanning rays cause reddening of the skin sunburn UV A rays are longer and able to penetrate the skin more deeply More responsible for premature ageing and wrinkling of the skin Increasingly being linked to eye damage and the formation of skin cancer Smart Ultraviolet Sensor The cancer inducing properties of UV are proportional to its ability to damage cell DNA The longer you are exposed to UV the more likely that damage will take place Sunburn is not connected with the sensation of heat When we are exposed to strong sunlight passing through glass in a window that absorbs UV B despite the sensation of heat our skin does not burn When exposed to sunlight in cold weather at high altitudes our skin can burn despite feeling cold The Smart Q Ultraviolet Sensor measures UV light intensity as irradiance in W m There are other ways that UV intensity and exposure are measured E g 1 The Ul
3. 020 0 015 y z E7 i 0 010 if 0 005 Ng i Free 0 000 200 220 240 260 280 300 320 340 360 380 400 420 440 460 480 500 wavelength nm The unit for ultraviolet irradiance is W m Measurements can be recorded at three levels using either a Slow or Fast response range e The slow response ranges are 0 500 mW m 0 5 W m and 0 50 W m e The fast response ranges are 0 500 mW m 0 5 W m and 0 50 W m The slow response is the most commonly used range and is suitable for use in most ultraviolet investigations The response has been smoothed to remove rapid fluctuations of UV If a slow range is selected it will be indicated by an S after the range on the sensor axis e g UV 5W m S W m The fast range is used to show mains frequency ultraviolet fluctuations These variations in UV intensity can be a source of interference for general work If a fast range is selected it will be indicated by an F after the range on the sensor axis e g UV 5W m F W m 1 Smart Ultraviolet Sensor The Smart Q Ultraviolet Sensor is equipped with a microcontroller that greatly improves its accuracy precision and consistency The microcontroller contains the calibration for the six ranges The stored calibration for the selected range is automatically loaded into EASYSENSE when the Ultraviolet Sensor is connected Connecting
4. V value for plain glass transmission Type plain glass into the Comment column Swap the plain glass slide for a lotion coated slide Click on the graph area to record the UV value for this value SPF Type the SPF value into the Comment column Repeat until all slides have been tested and click on Stop The investigation could be extended To test home made lotions e g olive oil bay oil etc to see if they have any effect 2 The slides could be swished around in water to simulate swimming and retested Smart Ultraviolet Sensor 3 The slides could be retested after several hours to see if the effectiveness of the lotion decays with time 4 Does the lotion loose effectiveness if kept for a year Warranty All Data Harvest Sensors are warranted to be free from defects in materials and workmanship for a period of 12 months from the date of purchase provided they have been used in accordance with any instructions under normal laboratory conditions This warranty does not apply if the Sensor has been damaged by accident or misuse In the event of a fault developing within the 12 month period the Sensor must be returned to Data Harvest for repair or replacement at no expense to the user other than postal charges Note Data Harvest products are designed for educational use and are not intended for use in industrial medical or commercial applications
5. ng markings made with a UV marker Smart Ultraviolet Sensor Ultraviolet Lamp lt Glass or plastic slide Plasticine Ultraviolet Suntan lotions of varying or Blu Tak Sensor SPF s use the same carrier types e g oil cream or milk Arrange the UV source so it shines at the Ultraviolet Sensor at a distance of about 100 mm Use a blob of plasticine to secure the Sensor in place Turn on the UV lamp about 5 minutes before the investigation starts to allow the tube to warm up and stabilise Make up a microscope slide for each SPF value of suntan lotion Label the slide with the name and SPF value Either smear a drop of the lotion over the surface of the slide or use second slide Sf 2 Pull to drag the lotion across You need to make sure 1 Push 4 back the slide is coated evenly forward Place another blob of plasticine about 20 mm in front of the Sensor to hold the test slide Connect the Ultraviolet Sensor to the EASYSENSE Open the EASYSENSE program and select Snapshot from the Home page If the Y Axis doesn t show a slow response range e g 50 W m S change to a slow range Select Test Mode from the Tools menu and check that the reading from the Ultraviolet Sensor is within range If not change to a more suitable range see page 2 Click on Start to begin recording Position an untreated slide in front of the Sensor and click in the graph area to record the U
6. ny DATA HARVEST uy i Data Harvest Group Ltd 1 Eden Court Leighton Buzzard Beds LU7 4FY Tel 01525 373666 Fax 01525 851638 e mail sales data harvest co uk www data harvest co uk Smart Q TECHNOLOGY Ultraviolet Sensor gt Product No 3277 EFR 105 Slow response ranges 1 500 mW m Resolution lt 0 4 mW m 2 5 W m Resolution lt 0 004 W m 3 50 W m Resolution lt 0 04 W m Fast response ranges 1 500 mW m2 Resolution lt 0 4 mW m 2 5 Wim Resolution lt 0 004 W m 3 50 W m Resolution lt 0 04 W m DS 064 No 3 Data Harvest Freely photocopiable for use within the purchasers establishment Smart Ultraviolet Sensor Contents INTOGUCION Mea E sii Got a eh ee ee ee eis 1 Connecting 2 To set the range 2 Background s sisien 3 Practical information 4 IMVESTIQANONS siensia e dy dee oa aE ndpde eae E A 5 Investigate absorption of UV radiation by suntan lotion 5 Wamanty oxccescecetiies tai cause Gatun vacansvasner bin catas oe aae NEEE E e oideeteras ate aes 7 Introduction The Smart Q Ultraviolet Sensor will measure the intensity of electromagnetic radiation in the ultraviolet UV A and B bands The Sensor uses a photodiode that is sensitive to UV in the range 215 nm to 387 nm 0 215 0 387 microns It has maximum spectral sensitivity at 300 nm Absolute spectral response of the photodiode 0 025 FER E 3 0
7. or guidance e Use a screen around the UV lamp so that pupils are not exposed to its direct rays e Even with UV A care should be taken to reduce exposure to the source to as little time as possible e We made use of a small hand held battery powered ultraviolet light source which emits mainly UV A radiation These are supplied commercially as security devices to identify markings made with a UV marker e g such as the 6V mini UV Fluorescent lantern with torch The one we purchased was supplied without a risk assessment check local regulations or the school advisory service e g SSERC CLEAPSS for guidance 4 Smart Ultraviolet Sensor e The output from an ultraviolet lamp is normally made visible by emitting some violet light true ultraviolet is invisible e Fluorescent lamps produce UV light by the emission of low pressure mercury gas Fluorescence occurs when UV is absorbed by a phosphorescent coating on the inside of the tube and re emitted as visible light e The sun is a source of UV UV in sunlight can in some cases penetrate clouds mist and fog Fresh snow can reflect up to 85 of the sun s rays e Halogen bulbs or lamps which are not UV protected by a plastic or glass shield are another source of UV Investigations Using the Slow range e Absorption of ultraviolet by different types of clothing not related to colour Whether the colour of clothing affects absorption of UV Investigate the UV protection pr
8. ossible to set the range from the unit Please refer to the EASYSENSE unit s user manual 2 Smart Ultraviolet Sensor Background Electromagnetic radiation is a transfer of energy through space via waves of oscillating electromagnetic fields What distinguishes the parts of the electromagnetic spectrum is the frequency of the oscillation and consequently the wavelength The Ultraviolet UV radiation band in the electromagnetic spectrum extends from the very short wavelengths of 100 nm to 400 nm which is just above violet light in the visible region of the spectrum Latin word for beyond is ultra True ultraviolet light is invisible Visible Light Region Violet 400 450nm Blue 450 500nm Green 500 570nm Yellow 570 590nm Ultraviolet Radiation Region Orange 590 610nm Red 610 700nm The Ultraviolet spectrum is divided into four smaller bands according to the nature of the radiation UV A is closest in wavelength to visible light Vacuum or UV C are closer to the soft X ray region of the electromagnetic spectrum Wavelength Vacuum UV 100 200 nm The energy in this band can only be transmitted in vacuum far UV UV C band 200 280 nm UV C radiation from the sun would be harmful but it is completely absorbed by the ozone in the Earth s upper atmosphere and does not reach the surface UV B band 280 315 nm UV B radiation from the sun is partly absorbed in the Earth s atmosphere
9. ovided by sunglasses Investigate absorption of UV radiation by suntan lotion Investigate how different material like plastic glass auto glass comparison clothes soft drinks etc absorb or reflect UV light e Direct or diffuse solar radiation a considerable amount of UV does not come directly from the sun but is scattered by the atmosphere e Fluorescent rocks e Fluorescent dyes from washing powders that absorb UV and then emit light e Different light levels produce different UV levels Using the Fast range e Variation of UV along a fluorescent tube compared to light output Investigate absorption of UV radiation by suntan lotion The sun protection factor SPF was developed to rate the general effectiveness of sunscreens and lotions to block UV B rays Historically UV A was not seen as damaging and the ability to block this section of the UV spectrum was not included SPF ratings numbers are determined by dividing 100 by the percentage of UV B rays transmitted through the sunscreen For example if a sunscreen blocks 95 of UV B then it is allowing 5 through Divide 100 by 5 20 therefore the SPF of this sunscreen is SPF 20 A sunscreen that blocks 97 of UV B would have a rating of 30 100 3 33 The actual difference between the effectiveness of an SPF of 20 and an SPF of 30 is 2 For this activity you would need a UV source We used a small battery powered UV fluorescent lantern supplied as a security device for identifyi
10. traviolet Index UVI which is a measure of the solar ultraviolet UV intensity at the Earth s surface relevant to the effect on human skin The higher the UV index number the greater the penetrating power of the UV radiation and the more likely the damage to skin 2 The Effective UV Dose is directly related to the onset of sunburn and is an integral of the Effective UV Intensity over the exposure time The dose unit is called MED or Minimal Erythemal Dose minimum erythemal dosage units per hour Both the UVI and the MED hour units take into account the erythemal response curve for reddening of skin The response curve follows the varying sensitivity of the average person to different wavelengths Skin sensitivity decreases rapidly over the UV B range approximately 100 times less sensitive every 20 nm and decreases less rapidly over the UV A range approximately half as sensitive every 20 nm The Smart Q Ultraviolet Sensor does not have wavelength weighting corresponding to the erythemal action spectrum so the readings cannot be converted to the UVI or MED hour units Practical information e Ordinary glass can cut off some UV that has a wavelength less than 300 nm e An appropriate UV light source would be within the UV A band because it s the least hazardous UV radiation to work with A risk assessment should be made on the type of UV light source used Refer to local regulations or the school advisory service e g SSERC CLEAPSS f
Download Pdf Manuals
Related Search