Do`s and Don`ts - Parkermotion.com
Contents
1. Automation SLVD Series Do s and Don ts Do 1 Follow the SLVD Quick Reference Guide for all wiring and parameter configuration 2 Apply 24VDC power to Connector X4 AC power should be applied prior to or in unison with the application of 24VDC power in order to avoid an Under Voltage Error Er 2 3 Supply the recommended input voltage of 240VAC 3 phase input power 4 Always save your parameter modifications Pr99 15 1 5 If using a motor that is not shown in the SLVD Quick Reference Guide set the inductance value Pr 47 to 2 of that motor s specified value The motor tables in the SLVD Quick Reference Guide are already adjusted to the proper values 6 Always issue a Pb99 11 1 after changing the SLVD Operating Mode Pr 31 7 Refer to the SLVD Quick Reference Guide SLVD User s Manual or contact Compumotor s Application Department for assistance at 1 800 358 9070 Do Not 1 Apply 120VAC input power The SLVD will not function properly 2 Modify the Resolver Offset parameter Pr 30 while the drive is enabled Only modify this parameter while the drive is disabled to prevent damaging the drive 3 Follow the catalog pin out shown in the Servo Motors section of the Compumotor 4 Product Catalog Rev 8000 4 for resolver connections Instead follow the resolver connections as outlined in the SLVD Quick Reference Guide 88 020930 01 Rev B
Download Pdf Manuals
Related Search