LIPS 16.cdr
Contents
1. Fader 1 When switching on the power supply the LED window will display the start DMX channel address It canbe A001 Ifthere are nocharacter and number display check the power whether it s correctly connected 2 The default start address for controlling the DMX channels ischannel 1 To adjust the initial start address you can press the Up key to increase it by 1 When holding the Up key for 1 second the startaddress will increase rapidly from the initial value to the desired value You can also press the Down key to decrease the present value by 1 When holding the Down key for 1 second the present value will decrease rapidly to the desired value NOTE Whenever you want to adjust the start address press Up key or Downkey to shift the start address setting mode In this case you may change the start address temporarily You can control the 16 continual DMX channels from the beginning of the starting address The start address must bel 512 And the overflowing channels will not be proceeded 3 Pushing the channel fader one of the 16 channels faders canallow you to adjust the relative channel value The LED will display the value temporarily with the default mode of decimal 0 255 when sliding the fader For percent display mode you can press the MODE key In this case the indicating LED of right lowercorner will be out in the display window and the indicating LED of right higher corner will be lit up After you h2. OXO Lips Ib 16 Ch DMX Controller User Manual 24 004 1459 Rev1 0 August 2004 LIPS 16 User s Instruction What s the LIPS 16 Thank you for your purchase this simple and convenient product This unit is a512 DMX controller whichcan control consecutive 16 channels from the start address each time Itcan be easily setthe start addressby Up Downkeys and adjustedthe channels valuesby 16 faders And it hasa useful LED display window for operation What is more owning power failure memory this unit can recover the previous settings Safety Instructions When unpacking it please check it up carefully for sure thatthis product isnot damaged and all accessories arenot missing Ifthere s any problem contact the local dealer or distributor without hesitation WCautions Do notmake any inflammable liquids water or metal contact it Keep away from the strong magnetic fields Reduce therisk ofelectric shock or fire when using this unit Packaging material must notbe left within children reach asit canbe dangerous Specifications WDMX Out 3 pin female XLR connectors WPower requirement 9VDC 300mA Including an AC DC adaptor WDimension 482mmx 132mm x 80mm VWeight 2 30 kg Copyright Notice Allrights reserved No part of this manual may be reproduced in any form orby any means without written permission Improvement and changes to specification design How to operate the LIPS 16 Fader Mode Up Down Master
3. ave setthe 16 channels values waiting about 10 seconds the LED window will automatically show the start address 4 Master fader Pushing the Master fader can controlthe output values of all the 512 channels The output value can be set to 0 255 by the Master fader There are also two display modes including decimal and percent mode The default mode is decimal mode And you can shift between these two modes by pressing the mode key Rear Panel Power Input Power Switch DMX Output 1 Power Input DC 9V 300mA Min 2 Power Switch Turn on off the mains power 3 DMX Output 3 pin XLR female socket
Download Pdf Manuals
Related Search