8051324 yakima whispbar racks k324 fit kit installation instructions
Contents
1. Fitment Place crossbar on vehicle Minimum recommended spacing between the bars is 700mm unless otherwise stated Place crossbar into gutter of vehicle Adjust crossbar in or out to suit vehicle Refer to the crossbar instructions for crossbar adjustment Loosely position crossbar ensuring the guttermount blade is hard against the inside of the vehicle gutter Tighten adjusting screw to 5 Nm Fiting Kt Loosely line up clamp over the vehicle gutter Use same capscrew and washer to secure clamp onto leg Repeat for all legs Check crossbar is securely attached to the vehicle Use keys to fit and lock covers2. whispbar Loads of He GB Fitting Instructions for Basic Carrier Revision No 1 0 Fiting Kt First Time Installation ln a i k 9 Aa Remove parts from packaging and check contents Contact your Prorack dealer if parts are missing or damaged g This kit fits type A and B only These instructions show type A crossbar fitted They also apply to type B Use keys to remove covers Fiting Kt Use hex screwdriver to reverse adjusting screw 10 turns Press adjusting screw and pull crossbar legs out Refer to the crossbar instructions for crossbar adjustment Ensure each end of the crossbar is adjusted equally X Remove clamp block by pressing backwards Fiting Kt Remove both pins from each leg use spanner located inside left hand cover to assist Detach foot from leg Store loose parts in a safe place Repeat for all legs Select a guttermount assembly from fitting kit Unscrew and remove clamps Fiting Kt Assemble guttermount assembly into leg ensure guttermount blade interlocks with leg Using short capscrew and washer secure assembly onto leg use Hex Screwdriver supplied with crossbar to assist Use two M5 x 12 mm self tapping screws to secure the leg to the guttermount blade Do not over tighten Repeat for all legs Fitting Kt
Download Pdf Manuals
Related Search