Home

- ServiceNet - T

1. Program PGM needs file FILE Check if file is existing and if directory and path specifi cations are valid portable rvs 32 CHAPTER 1 RVS MESSAGES FUNCTION FAILED E CALLER FCT failed with rc RC possible causes e not enough memory e database problem e internal rvs error please report to rus hot line INVALID COMMAND S PGM Invalid command CMD encountered internal rvs error Please report to rus hot line INVALID EXIT CODE E rps Unknown error code in exit command CODE please report to rus hot line INVALID VALUE S 9 PGM VAR contains invalid value VAL Check environment dataset for correct directory specifications if PGM is RPS Otherwise there is an internal problem please report to rvs hot line MALLOC FAILED 5 PGM Unable to allocate SIZE units of storage There is not enough virtual memory available in your system rus could not obtain temporary storage Check if there is enough space left for system page and swap files Remove unneccessary tasks or jobs from system Under DOS check if device drivers can moved out of the DOS memory into upper memory NO DSN AUTH B SK CN rps User USER not authorized to read data set DSN self explaining NO RCPT W SK CNSK rpssk No recipient found T Systems International GmbH Systems 33 During processing of a distribution list one recipient could not be retrieved from data
2. Station id SID is unknown self explaining SEND INV MASK E Masking as station SID not allowed self explaining portable rvs 56 CHAPTER 1 RVS MESSAGES SK ALR CREATED E Cannot delete receiver send request has been processed The selected send request has been partially processed by the monitor and a SK has been created Deletion of a single receiver is not possible any more You may cancel the entire send request to prevent sending START_ACCEPTED I START command accepted A rvs function has successfully been started by an authorized rus user SYS ERR S System error occured when calling function FCT RC RO Please report to rvs hot line SYNTAX PRINT I PRINT qual qual MANUAL shows syntax for PRINT statement SYNTAX RECEIVER I RECEIVER qual qual DELETE shows syntax for RECEIVER statement SYNTAX RESENTR I qual qual CREATE UPDATE DELETE shows syntax for RESENTR statement SYNTAX SEND I SEND lt qual gt qual CREATE DELETE HOLD RELEASE shows syntax for SEND statement SYNTAX START I START USER T Systems International GmbH Systems 57 shows syntax of START command SYNTAX USER I USER qual LANGUAGE lt lang gt UID lt uid gt PRIV lt priv gt NAME lt name gt lt qual gt CREATE UPDATE DELETE shows syntax of USER co
3. An invalid command line parameter was used Currently supported are c do not terminate batch interface after an error in a user command eRVSENV supersede default name of RVS environment dataset ADSN select input dataset ILANG select language q do not echo user commands on standard output quiet mode DATASET NOT EXIST Dataset DSN does not exist 7 The dataset specified with command line parameter i does not exist CNTL C ENTERED I Batch interface terminates CNTL C received CNTL C has been entered by user The batch interface terminates command execution COPYRIGHT I VER 1 7 rvs User Dialog Interface NO VALUE No value specified The field located by cursor or blinker needs to be filled with a required value portable rvs 46 CHAPTER 1 RVS MESSAGES INV ACTION O Invalid action Press F1 for HELP F3 to exit You pressed a key that is not allowed in the momentary contezt INSUFF PRIV O User USER not privileged You tried to initiate a priviledged operation for user USER but there is no authorization RECVR ADDED Receiver SID UID added to distribution list Another destination user UID at station SID has been added to the distribution list of the send order you are working on RECVR DELTD Receiver SID UID deleted from distribution list self explaining RE DELTD SWITCH RC DELETED DELETE FAILED This message indicates wether a deletion of a resident
4. IZ CN Delivery of VDSN DTAVAIL received at DTRECEIVED from SIDSENDER T Systems International GmbH Systems Stored in DSNLOCAL 13 This message indicates the successful delivery of data to the final recipient The virtual dataset name time and date it has been made available for transfer time and date of delivery user ids of sender and receiver are given for documentation and revision purposes save log files IZ DS IGNORED I IZ CNIZ Data set ignored due to RE CWRE Resident receive entry RE CNRE was found to match with an incoming dataset How ever there is already a dataset with same name and the replace option is not specified in the RE Because existing data should not be overwritten unless explicitly specified the incoming dataset is ignored LICENSE EXP 6 Your rvs license expired on YEAR MON DAY Your license for this version expired at the specified date and rvs is not operational any more Please contact T Systems concerning license renewal procedures LICENSE WARN W gt Your rvs license will expire on YEAR MON DAY Your license for this version will expire at the specified date and rvs will not be op erational any more Please contact T Systems as soon as possible concerning license renewal procedures to guarantee continued rus usage MO ALREADY ACTIVE W rpmoms Console CID1 already active cannot start CID2 Presently only one console
5. Return Codes 2 1 Command Parser Codes The following error indicators may be received on return from the rvs command parser code symbolic name explanation 1 RPXCI RC INV SYNTAX syntax error found by parser 2 RPXCI RC INV CMD invalid command issued 3 RPXCI RC INV PARM unknown parameter has been used 4 RPXCI RC PARM USED TWICE parameter has been specified two or more times 5 RPXCI TOO MANY POS PARMS too many positional parameters specified 6 RPXCI MISSING POS PARMS not enough positional parameters specified 7 RPXCI_RC_DUP_SID duplicate Station ID 8 RPXCI_RC_DUP_OID duplicate ODETTE ID These return codes may occur in the following context e rvs batch interface e call interface e when any operateur command is parsed by the rvs monitor e when reading a new station table via the modst operateur command 2 2 Call and Batch Interface Codes Presently a nonzero returncode from call or batch interface simply indicates that something went wrong Please refer to the message text issued allong with the error for further details Differentiated return codes for use in subsequent processing by user programs will be available in a future update release of portable rvs T Systems International GmbH rvs Systems Index command CAPI20 CTOUT LINE 76 modst 84 CAPI20 DROUT LINE 77 CAPI20 DTOUT LINE 76 error code 84 CAPI20 ERROR LINE 77 CAPI20 INFO LINE 75 fun
6. SFNA invalid record format SFNA invalid record length SFNA file too big 7 78 79 7 EFNA invalid record count EFNA invalid byte count EFNA access method failed EFNA duplicate file SFNA EFNA unspecified reason SFNA Start file negative answer or EFNA End file negative answer occured in ODETTE FTP MISSING VALUE E Expected parameter PARM not found in received Z record An error occurred during Z record processing No value specified for parameter with name given by PARM This may be due to an rus error at the neighbouring node Please report to rvs support team Work around do not use Operator message and distribution list facilities Please report to rus support team INV_Z_REC I Invalid content of Z record RC RC 7 RECORD Please report to rvs support team UNKNOWN NETID E NetID NETID not defined The network id NETID is not known on your system Please check station table and correct accordingly INV_INDICATOR E Receiver called with invalid indicator IND current state STATE An internal error occured in work flow control of the rus receiver Please report to rus support team portable rvs 37 38 CHAPTER 1 RVS MESSAGES VALUE TOO LONG E Value of PARM in received Z record too long An error occurred during Z record processing Work around do not use Operator message and distribution list facil
7. Systems 11 The program PGM tried to open dataset FILE and failed Check if FILE is existing in the right path and or if it is in use by someone else FUNCTION_FAILED E CALLER FCT failed with rc RC An internal error occurred Please report to rvs hot line IE2IZ FAILED E dispatch ie2iz LINE Creating IZ IZ from IE IE failed ACT returned rc RC The monitor detected an IE event indicating that a dataset has been received However the the creation of a correspondent IZ command for delivery of the data to the final recipient or user has failed Check if system is not short of memory Please report this error to rus hot line IE2SE FAILED E dispatch ie2iz LINE Creating SE SE from IE IE failed ACT returned rc RC The monitor detected that a dataset has been received for a non local destination However the creation of a correspondent send order entry command SE for forwarding the file failed Check if system is not short of memory Please report this error to hot line INIT A rpm Reading initial commands This message is issued after the rus monitor has been started and initial commands are read from the minitor initial commands dataset INVALID COMMAND S PGM Invalid command CMD encountered An internal error occurred Please report to rvs hot line INVALID EXIT CODE E rpm Unknown error code in exit command CODE An internal error occurred Pleas
8. TABLE_NOT_EXIST E Table TAB does not exist T Systems International GmbH Systems Database table TAB does not exist SYNTAX ERROR E Syntax error in command Syntax error found by parser INVALID CMD E Invalid command issued Invalid command issued INVALID COLNAME E Database table or dump file has invalid field name Database table or dump file has invalid field column name INVALID INPUT E convert failed invalid input data type PARM USED TWICE E Parameter used more than once Parameter in table used more than once in command RECOVER DATABASE I Recover RVS database DB This message is issued when RVSWDB starts to recover the system tables of the database to be used by ros B RECOVER DONE I Recovery of RVS database has been successful ended ENTRE entries read ERR error s occured Recovery of RVS database has been successful ended RECOVER ERROR I Done with recovery of RVS data base gt entries read ERR error s occured portable rvs 69 70 CHAPTER 1 RVS MESSAGES Recovery of RVS database has been ended with ERR error s RECOVER FAILED E Recovery of RVS data base failed ENTR entries read ERR error s occured up to this time Recovery of RVS database terminated by user ENTR entries read up this time ERR error s occured up to this time CONTINUE I Continue w
9. station because the ODETTE has detected an error The reason is given by REASON 0 normal termination 1 Command not recognized 2 Protocol violation 3 User code not known 4 Invalid password 5 Local site emergency closedown 6 Command contained invalid data 7 NSDU size error 8 Resources not available 9 Time out 10 Mode or capabilities incompatible 99 Unspecified error For detailed explanation refer to ODETTE SPECIFICATIONS FOR FILE TRANS FER ttp www odette org odg4 40ftp htm INTERNAL ERROR TEXT E Internal error occured in FILE at line LINE REASON REASON Please report to rvs support team INTERNAL ERROR RC E Internal error occured in FILE at line LINE REASON REASON internal error with reason given by REASON occured in line LINE of file FILE Please report error to rvs support team TRANSMIT ERROR E REASUN TEXT REASON REASON occured SID NEIGHB CN CNIE An error occured during transmission of data reason is given by REASON or REASON TEXT which may be ESID RES AVAIL resources not available could not write local file ESID CLOSEDOWN emergency close down was requested by application T Systems International GmbH Systems SHOW CAUSE E Error occured when starting or ending file transfer CAUSE CAUSE SWITCH CAUSE no error SFNA invalid filename SFNA invalid destination SFNA invalid origin
10. T Systems International GmbH Systems 35 FUNCTION FAILED HEX E CALLER failed with rc RC ALTERNATIVE CONN W Trying alternative connection to SID PROT PROT N N Info when connection will be traying DATASET NOT EXIST E Dataset DSN does not exist self explaining check path and drive specifications 1 4 rvs Receiver LOG FMT rpr AVAIL VDSN CN CMDNUM TEXT Standard format for log messages written by the receiver The fields have the following meaning AVAIL date and time when data had been queued for sending at originator 79227 VDSN virtual dataset name used for transmission CN command number of IE the receiver is working on 0 TEXT explanatory text which tells why a log message was created If the receiver generates a log message in a very early phase where it has mot yet received the file header i e the SFID the fields have default values as indicated in parentheses SESSION ENDED W Session aborted RC REASUN NSWITCHCREASON Normal termination Command not recognized Protocol violation Odette ID not known Invalid password Local site emergency closedown Command contained invalid data NSDU size error Resources not available Time out Mode or capabilities incompatible Unspecified error portable rvs 36 CHAPTER 1 RVS MESSAGES The receiver has terminated the session with the neighbouring
11. base Please report to rvs hot line NO STATREC W rps Unable to store statistics record rc RC for transfer to SID completion code ERROR There might be a database problem please report to rvs hot line PARM_UNAVAILABLE E PGM PARM unavailable or invalid A requested rus parameter could not be found This might be a problem with your data base Please report to rvs hot line RPS_STATUS_TERM A CN CN Setting status of cmd ended with completion code AC This is an rvs 400 specific message which occurs if the status of a SK or QS could not be reset after the transmission had failed CONNECTED I SID SID Connection established The exchange of Odette IDs and passwords was successful If there are queued files they will be transmitted now otherwise the connection will end immediately FILE STARTED A SK CN Start transmission This message appears after the exchange of Odette IDs and passwords and before trans mission of data RPS_TERMINATION E SK CN Sending ended code RC SWITCH RC successful transmission no connection available operator requested termination interrupt signal received transmission rejected by neighbor SFNA or EFNA error occured during transmission invalid command for transmission neither SK nor QS severe internal error portable rvs 34 CHAPTER 1 RVS MESSAGES This message indicates the termination of a sender proc
12. depending on context and system LTRACE I PID TEXT This message is issued when line trace output is directed to the rus console This option is not yet used portable rvs 80 CHAPTER 1 RVS MESSAGES LTRACT W PID Linetracing is active for station SID This message indicates that Line tracing is active for the particular station SID It reminds you that additional resources e g trace files are consumed and performance might be not optimal PID is the process id of the respective sender or receiver task OTRACT W PID ODETTE tracing is active for station SID This message indicates that ODETTE tracing is active for the particular station SID It reminds you that additional resources e g trace files are consumed and performance might be not optimal PID is the process id of the respective sender or receiver task LTERROR E PID unable to open linetrace log file A Line or ODETTE trace file could not be opened in the directory specified for TEMP in your environment dataset INVALID NEIGHB E neighbor station SID SID not or not completely defined the station id resp a part of the station configuration cannot be found in station table RCAPI READY L PID RCAPI ISDN Receiver COMMNO ready No NUMBER This message indicates that a prestarted listening ISDN receiver is up and ready to accept incoming calls TEXT may contain further details PID is the process id of the respective ISDN
13. 68 SYNTAX IDB 5 SYNTAX_DDB DBWD 67 SYNTAX_DRU DBWD 67 SYNTAX ERROR DBWD 69 SYNTAX PRINT UTILS 56 SYNTAX RECEIVER UTILS 56 SYNTAX RESENTR UTILS 56 SYNTAX SEND UTILS 56 SYNTAX SENDJOB UTILS 58 SYNTAX START UTILS 56 SYNTAX USER UTILS 57 SYNTAX DBWD 66 SYNTAX RII 71 SYS CMD DELDB 64 SYS ERR UTILS 56 TABLE EMPTY DBWD 67 TABLE NOT CLOSED DBWD 68 TABLE NOT EXIST DBWD 68 TABLE NOT OPEN DBWD 68 TABLE ROWS UDIF 48 TABLE WRITTEN DBWD 68 TABLES CREATED IDB 6 TCPIP_BIND LINE 79 TCPIP_CONNECT LINE 79 TCPIP_CTOUT LINE 79 TCPIP_ERROR LINE 78 TCPIP OUTGING CALL LINE 75 TCPIP_READY LINE 79 TCPIP_WARN LINE 79 TO RVSSP MONITOR 29 TOO MANY RECEIVERS UTILS 57 TRANSMIT ERROR RECEIVER 36 UNDEFINED LID IDB 6 UNIT UDIF 46 UNKNOWN NETID RECEIVER 37 USER UTILS 57 USER ALR EXIST UTILS 57 USER NOT EXIST UTILS 57 UTILITY FAILED MONITOR 17 VAL NOT SUPP UTILS 55 VALUE TOO LONG RECEIVER 38 VIRTUAL DSN UDIF 47 X25 CALL OK LINE 75 90 X25 ERR CAUSE LINE 80 X25 ERR DIAG LINE 81 X25_ERROR LINE 75 X25_IN_OK LINE 75 X25 IN REJCT LINE 75 X25 OUTGING CALL LINE 75 X25 READY LINE 74 X25 STOP LINE 74 X25 WARN LINE 79 XMT ACTIVE MONITOR 17 XMT START MONITOR 17 XMT STOPPED MONITOR 17 XOT CON RCV LINE 81 XOT CON SND LINE 81 XOT RCV DATA LINE 81 XOT READ
14. This message indicates that a resident receive entry RE with number CNRE was found to match incoming information criteria and therefore was executed RE JOB A RE CWRE starts DSNTEMP for IZ CNIZ RE JOBERR E Error during start of DSNTEMP RE CNRE IZ CNIZ This message indicates that a Resident Receive Entry with number CNRE fits to incom ing data and should be started but this failed RE_JOBERR_OINFL E Error during start of RE RE CNRE IZ CNIZ DSNSCRIPT couldn t be opened This message indicates that a Resident Receive Entry with number CNRE fits to incom ing data and should be started but this failed because the configured script file couldn t be opened The file either doesn t exist or rus doesn t have read permission RVS TERMINATION I RVS Monitor terminates return code RC The rvs monitor has ended If RC is not zero kindly inform rus hot line Exceptions rus VMS where good returncodes are always 1 rvs PC where returncodes 2 and 3 are used to decide wether to start receiver or sender portable rvs 16 CHAPTER 1 RVS MESSAGES SE2SK FAILED E dispatch se2sk LINE Creating SK SK from SE SE failed ACT returned rc RC send order entry SE was found in the rvs data base however the creation of an executable send command SK failed Please report to hot line SE SENT A SEC CN successfully sent DSNLOCAL for UIDSENDER at SIDSENDER This message i
15. and system ISDN CHARGE A U units CAPI20 INFO I TEXT portable rvs 76 CHAPTER 1 RVS MESSAGES An Info about status of CAPI20 TEXT is a short info text depending on context and system CAPI20_NOLVL3 E No ISDN connection on level 3 Last error TEXT This message indicates that the D channel connection has been established but set up the logical connection of a B channel failed TEXT is the E DSS1 error code CAPI20 CON E Error occurred during set up the ISDN connection TEXT This message indicates that the ISDN connection couldn t be established TEXT is the E DSS1 error code CAPI20 CTOUT E Timeout occurred during set up of ISDN connection to address NO This message indicates that the ISDN connection couldn t be established timeout occurred during the creation of ISDN connection to ISDN address NO The time passed between CONNECT REQ and CONNECT B3 ACTIVE IND messages CAPI20 RTOUT E Timeout occurred during set up of incoming ISDN connection address This message indicates that am incoming call from NO was received but the logical B channel connection couldn t be established timeout occurred The time passed between CONNECT I and CONNECT B3 ACTIVE IND messages CAPI20_RNODA E Error no data length BYTES This message indicates that incoming data are signaled but either the data buffer is invalid or the data length is zero BYTES is the length of data l
16. progress CNTL C received CNTL C has been entered by operator it is interpreted as a STOP command For rvs however CNTL C is used to obtain the console input prompt CONVERSION FAILED 6 CALLER Conversion FCT failed with rc RC severe internal processing error ocurred Program CALLER suffered a failure when invoking conversion subroutine FCT Please report this error to the rvs hot line DBW FAILED E DBW Recreation of data base failed rc RO The recreation of the rvs database failed Possible reasons are e not executable database command read from log file logfile damaged or manipu lated e wrong log file was specified e log file could not be opened or is not available e I O errors occurred Please make sure that you are starting recovery from a valid backup database together with the correspondent database log file that has to start from the moment your backup database from which you attempt to recover has been saved Please contact hot line for more help DBW OK I DBW Data base restored check LOG for messages restart RVS monitor portable rvs 10 CHAPTER 1 RVS MESSAGES The rvs database has successfully been recreated DBW RC DIFFER W DBW New return code RCNEW differs from original one RCOLD for CMD During recreation of the rvs database from a backup database and the database log file containing all the changes of the database since them a command
17. protocol detected a problem and rejected the transfer The reason is indicated in ERR e invalid filename The virtual filename is not a valid filename on the target system because of security limitations and or naming rules e invalid origin The originating station is not known at the target site e invalid destination The destination station is not known at the remote site e storage record format not supported target system is unable to store datasets with the specified format e mazimum record length not supported e file size is too big no space on target system or other reason that prevent storage e invalid record count there is a mismatch between record count on sending and receiving side e invalid byte count there is a mismatch between byte count on sending and receiving side e access method failure target system could not allocate dataset e duplicate file same file has already been received User Notifications NO Z REC W Unable to send SK CNSK node NEIGHB does not support distribution lists IZ_ENDED 1 DSN DT received IZ CM Dataset DSN has been received as result of information delivery IZ CN SE ENDED I DSN DT successfully sent SE CNSE Dataset DSN is sucessfully transferred receipt is received Operator Command Related Messages OK CMD DONE I CID CMD done indicates that command CMD entered on console with id CID has be
18. s and USERS from RVS database DB This message is issued when RVSDRU starts to dump the resident receive entries and users of the database to be used by rus B FUNCTION FAILED E Function call FUNCTION ended with return code RC The function given by FUNCTION ended with return code RC This error is either due to e unsufficient memory e non existing directory or library e an rus system error SYNTAX WDB E Invalid command line parameters specified Correct syntax is RVSWDB e lt rvsenv gt i input file gt l lt language gt T Systems International GmbH rvs Systems 67 This message describes the command line parameters and options expected or accepted by RVSWDB e erusenv supersede default name of RVS environment dataset e idsn select input dataset to recover database tables default is rldbdump log e llang set default language for ros B SYNTAX DDB E Invalid command line parameters specified Correct syntax is RVSDDB e lt rvsenv gt l lt language gt This message describes the command line parameters and options expected or accepted by RVSDDB e erusenv supersede default name of RVS environment dataset e llang set default language for SYNTAX DRU E Invalid command line parameters specified Correct syntax is RVSDRU e lt rvsenv gt l lt language gt This message describes the command line parameters and options expected or accepted by
19. was encountered that lead to a returncode different from that found in the log dataset This might be indicator for the moment or action from when on the old database was corrupted DBW START Start of data base recovery from log DSIP rus database recovery has been started using the database logfile DSN DB DISABLED I rvs data base is currently disabled try again later The rvs data base is currently not available due to maintainance activities Ask your rus administrator when it will be available DSN DEL FAILED I Unable to delete DSN termination of KT CN The monitor failed to delete dataset DSN which might be a successfully transmitted dataset for which disposition delete was specified or the temporary dataset that was created during reception of an incoming dataset which has successfully been delivered to its final destination DSN_DEL_REJECTED I 0516 must not delete DSN termination of SE CNSE ORIG is not authorized to delete dataset DSN DSN DELETED A DSN deleted termination of KT CM The monitor failed to delete dataset DSN which might be a successfully transmitted dataset for which disposition delete was specified or the temporary dataset that was created during reception of an incoming dataset which has successfully been delivered to its final destination FILE UNAVAILABLE E PGM FILE unavailable T Systems International GmbH
20. will be deletet veralteter IE wird nach Uebertragungsabbruch geloescht CMD FREED A KT CNA with label LAB freed was in S hold Predecessor was CN CNF Command KT CN was held by system because it was serialized to some event e g another transfer which now has occurred Consequently it is now released from system hold and made eligible for processing CMD_S_FREED A KT CN freed from serialization still in HOLD hold Command KT CN was held by system because it was serialized to some event e g another transfer which now has occurred In addition it also was placed in operator hold Consequently it is now released from system hold but is still remaining in operator hold CMD TERMINATED A KT CN terminated status STAT T Systems International GmbH Systems The specified command KT CN has ended STAT indicates the command status usually for ended CMDLINE MISSING LANG W rpm Missing language specification in command line flag 1 ignored The command line flag for language selection l has been specified the invocation call of rus monitor but not language is specified The language last in use is taken CMDLINE UNKNOWN FLAG W rpm Undefined command line parameter FLAG ignored rus monitor has been called with an undefined probably mistyped command line pa rameter flag indicated in FLAG which will be ignored CNTL_C_ENTERED Monitor shutdown in
21. 7 lt User Dialog Interface L8 rvs Internal Utilities 1 9 System Emergency 1 10 rvs Operator Console 1 11 Delete rvs TATA hehe te Be o te ek es 1 12 Dump and Recover 1 13 Recover Isam 1 14 Stop cee a lin dn ee 1 15 rvs Linedrivers lt oie Sete oe he ee MAA ek ok Se 116 rvs Woe BL AA bs Sh oh ah tura Tal umm aeu eodem ees s cu eft ad 2 Return Codes 2 1 Command Parser Codes 1 1 uoo E 2 2 Call and Batch Interface portable rvs About this Book This manual is intended as a message reference for persons who install customize and operate rvs Tt is meant to complement the User and Reference Manual use this manual you should be familiar with the basic concepts of rvs as described in Reference Manual Overwiev You should especially give attention to the sections about rvs monitor database and the rudiments of the protocol layers Chapter 1 rvs Messages rvs B messages consist of a message identifier a message class and the message text message identifiers consist of speaking character string foll
22. AD CHOICE UDIF 48 BB DONE MONITOR 6 BB FAILED MONITOR 6 BCKUP ERR FAIL MONITOR 28 BCKUP_ERR_FORK MONITOR 27 BCKUP_ERR_WAIT MONITOR 28 BCKUP_ERR_XMTSTARTFAIL MONITOR 28 BCKUP_ERR_XMTSTOPFAIL MONITOR 27 BCKUP_FINISHED MONITOR 28 BCKUP_START MONITOR 27 CALL_OUT LINE 74 CANNOT PROCESS UTILS 50 CAPI20 CON LINE 76 qagaaaaaadaadnaanaaanaana 85 86 CONNECT_FAILED_X ODETTE 39 CONNECT_IND ODETTE 44 CONNECTED SENDER 33 CONTINUE DBWD 70 CONVERSION_FAILED MONITOR 9 CONVERSION_FAILED SENDER 31 COPYRIGHT BATCH 45 CREATING DATABASE IDB 3 CREATING TABLES IDB 3 DATA ERROR ODETTE 40 DATABASE CREATED IDB 4 DATASET NOT EXIST BATCH 45 DATASET NOT EXIST DBWD 66 DATASET NOT EXIST IDB 4 DATASET NOT EXIST SENDER 35 DATASET_NOT_EXIST UTILS 51 DATASET NOT FV UTILS 51 DB DISABLED MONITOR 10 DB ERROR ODETTE 40 DB ERROR UTILS 51 DB FIELD UNAVAILABLE SENDER 31 DB UPDT ERROR SENDER 31 DBDEL INFO DELDB 63 DBERR MONITOR 30 DBW FAILED MONITOR 9 DBW OK MONITOR 9 DBW RC DIFFER MONITOR 10 DBW START MONITOR 10 DEL DB DELDB 63 DEL DONE DELDB 63 DEL LOG DELDB 63 DEL_NOT_UNIQUE UTILS 52 DEL STATUSFILES DELDB 63 DEL_TEMP DELDB 63 DEL_TRACEDIR DELDB 63 DISCONNECT ODETTE 44 DISKSPACEERR MONITOR 30 DISKSPACEWARN MONITOR 30 DONT REM PRIV USER UTILS 52 DSN DEL FAILED MONITOR 10
23. AG private public key for SID DATE not found or invalid rc RC ERR DUR RVSSP S Error during service provider execution rc RC check diag log ans service provider logs ERR TO RVSSP 9 Error during handover to service provider rc RC check diag log TO RVSSP A Command CN queued for service provider REQUEUE JOB A Command CN requeued for DATE FROM RVSSP A Command CN got from service provider SP START FAILED E Unable to start Service Provider rc RO portable rvs 30 CHAPTER 1 RVS MESSAGES MASKED SIDDEST W Receive Entry CMD with SIDDEST SID delivered local self explaining please check NO LICENCE USERSID Uising of User Stations not licenced abort command Your licence key rdkey dat doesn t have the component C of the User Level Security that is necessary for User related ODETTE IDs NO LICENCE TRANSR E using of Transport Restrictions not licenced abort command Your licence key rdkey dat doesn t have the component D of the User Level Security that is necessary for Transmission Restrictions HOST NOT FOUND W rvs Host HOST does not exist or stopped The name of the rvs node does not exist or the rvs node is already stopped See the value of RVSNODENAME in the environment file rvsenv dat DBERR W Unable to connect to data base Unable to connect to database try to reconnect DISKSPACEWARN W Diskspace an
24. CTIVATE MONITOR 26 OK_CMD_DONE MONITOR 19 OK_CN_ALREADY_HELD MONITOR 20 OK CN FREED MONITOR 20 OK CN HELD MONITOR 20 04 011 FOUND MONITOR 20 OK CN NOT HELD MONITOR 20 04 011 NOT QUEUED MONITOR 20 OK CN SERIAL HOLD MONITOR 20 OK DB FAILED MONITOR 20 OK DBV MONITOR 21 OK HELP MONITOR 26 OK HELP CMD MONITOR 26 OK HELP MORE MONITOR 26 OK HELP PARM MONITOR 26 OK HELP RPARM MONITOR 26 OK INVALID CN MONITOR 21 OK INVALID DSN MONITOR 21 OK INVALID PARM MONITOR 21 OK INVALID STATUS MONITOR 21 OK INVALID SYNTAX MONITOR 21 LISTST FAILED MONITOR 21 OK MODST FAILED MONITOR 22 OK MODTR FAILED MONITOR 22 OK MSG TOO LONG MONITOR 23 OK NO DBV MONITOR 23 OK_NO_DSN MONITOR 23 OK_NO_MATCH MONITOR 23 OK_NO_MSG_RCPT MONITOR 23 OK_NO_MSG_TEXT MONITOR 23 OK NO SID MONITOR 23 OK OPCMD DONE MONITOR 24 OK OPCMD FAILED MONITOR 24 INDEX OK OPCMD INV TIME MONITOR 24 OK OPCMD NO PARM MONITOR 24 OK OPEN FAILED MONITOR 24 OK READ MONITOR 24 OK SID DELETED MONITOR 24 OK SID FREED MONITOR 24 OK SID IS SUSPNDED MONITOR 25 OK SID NOT FOUND MONITOR 25 OK SID NOT FREED MONITOR 25 OK SID NOT HELD MONITOR 25 OK SID NOT SUSPND MONITOR 25 OK SID SUSPND MONITOR 25 OK SQL ERROR MONITOR 25 OK_SUSPND_NOT_SUPP MONITOR 25 OK TERMIN MONITOR 26 ONLINE ENCRYPTION ODETTE 41 OPEN
25. D at SID rvsums ended with rc RC T Systems International GmbH Systems user notification or message could not be delivered for some reason This is not a critical error CLNUP DEL A db cleanup deleting KT CN 5 DT This message is issued when a database cleanup has been started upon reception of a CLEANUP command from operator console or from command dataset KT CN indi cates the database entry currently being deleted KS and DT indicate the correspondent command status and creation date CLNUP DEL SS A Cleanup of RVS data base purge all SendStatistics with DTEND lt DIDEL This message is issued after reception of a CLEANUP command with the option SS YES specified All send statitstics entries with age older than DTDEL will also be deleted CLNUP DONE OK I db cleanup was successful All deletable items found with age older than specified in the DAYS parameter of the CLEANUP operator command have successfully been deleted See related CLNUP DEL messages CLNUP ERR CMD W db cleanup Error occured while deleting KT CN rc RO During cleanup command KT with commandnumber CN could not be removed from the data base which probably is out of order or the Monitor could not obtain enough memory from system CLNUP_ERR_FETCH db cleanup Terminating due to error during command retrieval SQL rc Nothing deleted During cleanup nonzero returncode was rece
26. DBV W CID No data base version information available data base probably created prior to Rel 1 01 You are probably using a version of the data base that was created before version information was stored within the data base itself Therefore the requested information is not available OK NO DSN I CID Required data set name is missing An operator command that requires an input dataset e g MODST or OPCMD was entered without a dataset being specified OK_NO_MATCH 1 CID No matching entry found A LISTCMD STATUS command has been issued but no database entries have been found with specified status OK NO MSG RCPT E CID No message recipient specified use CID cid SID sid operator message has been issued with no destination SID specified OK NO MSG TEXT E CID No message text specified use MSG An OPMSG command has been issued without any message tect OK NO SID W CID Required station id is missing LISTST operator command has been issued with no SID parameter specified portable rvs 24 CHAPTER 1 RVS MESSAGES OK OPCMD DONE I CID Operator command re scheduled for TIME The command will be executed again at the specified date and time Stopping Monitor removes the command from data base however OK OPCMD FAILED E CID Unable to re schedule operator command For some reason the command could not be stored Please check addit
27. DISK low needed NEEDED kb availiable AVAIL kb Diskspace below DISKSPACEWA RN clean Disk DISKSPACEERR W Diskspace an DISK extrem low needed NEEDED kb availiable AVAIL kb Diskspace below DISKSPACEERR clean Disk LOGDUMP I Count logmessages COUNT exceeds limit of LIMIT COUNTDUMP logmessages dumped to dataset DSN and de Logmessages dumped to disk T Systems International GmbH Systems 31 INFOSTATUS I COUNTCNT commands are queued the average time to serve is AVT Milliseconds it took at least SWITCH TIMEUNIT seconds minutes hours to serve all commands Statusausgabe zur Verarbeitungsgeschwindigkeit HEADYDUTY W rvs is overloaded COUNTCNT commands are queued he average time to serve is AVT Milliseconc SWITCH TIMEUNIT Sekunden Minuten Stunden to serve all commands Warnung zur Verarbeitungsgeschwindigkeit 1 3 rvs Sender DB FIELD UNAVAILABLE E PGM data base field FIELD unavailable rc RC Problem with database This could be due to a shortage in system memory Please report to rus hot line DB UPDT ERROR E PGM data base field FIELD could not be modified rc RC Problem with database This could be due to a system memory shortage Please report to rus hot line CONVERSION FAILED S CALLER Conversion FCT failed with rc RC please report to rvs hot line FILE UNAVAILABLE E PGM FILE unavailable
28. DSN DEL REJECTED MONITOR 10 DSN DELETED MONITOR 10 DSN DISP UDIF 47 DSN INSUFF PRIV UTILS 52 DSPR MSGDISP UDIF 49 DSPR MSGSTAT UDIF 49 DSPR MSGVDSN UDIF 49 DUMP DATABASE DBWD 66 DUMP DONE DBWD 67 DUMP RU DBWD 66 DUMP RU DONE DBWD 68 DUMP RU WRITTEN DBWD 68 DUMP TABLE DBWD 68 DUMP WRITTEN DBWD 68 DUPLICATE RESENTR UTILS 52 DUPLICATE SENDJOB UTILS 57 EFCHECK UTILS 52 INDEX END CNS 61 EQUAL VALUE CHECK 83 ERR_DUR_RVSSP MONITOR 29 ERR_TO_RVSSP MONITOR 29 ERROR UDIF 48 ESID_ERROR ODETTE 40 FATAL UDIF 48 FILE STARTED SENDER 33 FILE UNAVAILABLE MONITOR 10 FILE UNAVAILABLE SENDER 31 FLUSH CACHE UTILS 52 FORCED UTILS 54 FROM RVSSP MONITOR 29 FUNCTION FAILED BATCH 44 FUNCTION FAILED DBWD 66 FUNCTION FAILED DELDB 64 FUNCTION FAILED IDB 4 FUNCTION FAILED LOGW 81 FUNCTION FAILED MONITOR 11 FUNCTION FAILED RII 70 FUNCTION FAILED RVSSTOP 72 FUNCTION FAILED SENDER 32 FUNCTION FAILED HEX SENDER 35 GET LID FAILED CHECK 82 HEADYDUTY MONITOR 31 HELP END UDIF 49 HELP INV FIELD UDIF 49 HELP NOT AVAIL UDIF 50 HELP PFK LIST UDIF 50 HOST NOT FOUND MONITOR 30 IE2IZ FAILED MONITOR 11 IE2SE FAILED MONITOR 11 INCOMING CALL ODETTE 40 INDEX COLUMN X RII 71 INFOSTATUS MONITOB 31 INIT CMD MONITOR 11 INIT DONE IDB 4 INIT EMPTY TABLES IDB 4 INIT PAR
29. GW START A LogWriter started The command to start Log Writer was successfully executed LGW STOPPED I LogWriter has already been stopped The command to stop Log Writer is ignored because it has been executed before BCKUP START I Starting automatic backup BCKUP ERR XMTSTOPFAIL E Backup isn t possible because rvs master transmitter isn t stopped LRET BCKUP ERR FORK E Backup impossible ERR portable rvs 28 CHAPTER 1 RVS MESSAGES BCKUP ERR WAIT E Backup status unknown ERR BCKUP ERR FAIL E Backup failed ERR BCKUP FINISHED I Backup finished BCKUP ERR XMTSTARTFAIL E Start of rvs master transmitter failed ERB PRMCHG ERR CRQ E Creating of message store failed ERR PRMCHG CHANGE I Monitor parameter changed initialize master transmitter PRMCHG ERR XMTSTOPFAIL E Parameter change master transmitter couldn t be stopped LRET PRMCHG ERR XMTSTARTFAIL Restart of rvs master transmitter failed ERR IZ COPY FAILED HEX E IZ CNIZ could not copy received data set TDSN to ODSN SWITCH REASON gt unknown error see diag log text file contains binary zeroes copy return code RC T Systems International GmbH Systems 29 KEYID NOT FOUND S no NSWITCH KEYFLAG private public Key ID ID for file FILE from SID found DATE INVALID CRYPKEY 9 SWITCH KEYFL
30. IG Destination SIDDEST portable rvs 44 CHAPTER 1 RVS MESSAGES LOC RCVEERP 0 local EERP for DSN from SIDORIG Destination SIDDEST OFTP NO RESOURCE 0 Sessionlimit reached session to SIDDEST PROT could not be established CONNECT IND 0 Responder Connection with Station SID with Credit CREVAL Odette Buffer EXBUF SWITCH COMPRE CONNECT 0 Sender Connection with Station SID with Credit CREVAL Odette Buffer QEXBUF NSWITCH COMPRESS DISCONNECT 0 Connection as SWITCH DIR receive send to Station SID ended CHECK_CONN 0 physical connect to SID SWITCH RC gt succeeded failed not possible no line defined 1 6 rvs Batch Interface CMD FAILED E Command ended with return code RC CMD The command given by CMD failed with return code RC This message is issued if no more detailed error message has been set when the utility command was issued FUNCTION FAILED E Function call ended with return code RC FCT T Systems International GmbH Systems 45 This message ussually indicates a severe error Check rvs installation and environ ment Contact rus hot line if necessary MISSING VALUE E No value specified for command line parameter PARI value was expected for command line parameter given by PARM No value found INV CMDLINE PARM E Invalid command line parameter ARGSTR
31. ISSED ENTRY CHECK 83 MISSING INPUT FILE DBWD 67 MISSING PARM UTILS 53 MISSING VALUE BATCH 45 MISSING VALUE DBWD 67 MISSING VALUE IDB 5 MISSING VALUE RECEIVER 37 MISSING VALUE RII 71 MO ALREADY ACTIVE MONITOR 13 MO START FAILED MONITOR 13 MO STARTED MONITOR 13 MO WRITE ERROR MONITOR 13 NEW CMD CREATED MONITOR 14 NO DB DELDB 64 NO_DS_AUTH MONITOR 14 NO DSN AUTH SENDER 32 NO_ENV_DATASET DBWD 66 NO_ENV_DATASET IDB 5 NO_ENV_DATASET RII 70 NO LGW PORT CHECK 82 NO LICENCE COMP UTILS 54 NO LICENCE CRYP UTILS 54 NO LICENCE LINE LINE 73 NO LICENCE TRANSR MONITOR 30 NO LICENCE USERSID MONITOR 30 NO LICENCE USERSID UTILS 54 NO MORE MEMORY RII 71 NO NEIGHBOR MONITOR 14 NO PERM ULS UTILS 54 NO PRIVILEG UTILS 53 NO RCPT MONITOR 14 88 NO RCPT SENDER 32 NO SELECT UDIF 48 NO SK FOR QE MONITOR 14 NO SPDIR DELDB 64 NO STATREC SENDER 33 NO TEMP DELDB 64 NO TRACEDIR DELDB 64 NO VALUE UDIF 45 NO Z REC MONITOR 19 NOCRYP UTILS 54 NOT AUTH MONITOR 14 NOULS UTILS 54 NYI UDIF 48 ODTID UNKNOWN ODETTE 42 OFTP_END ODETTE 43 OFTP_END_ERR ODETTE 43 OFTP_NO_RESOURCE ODETTE 44 OFTP_RCV ODETTE 43 OFTP_RCV_END ODETTE 43 OFTP_RCVEERP ODETTE 43 OFTP_SEND ODETTE 42 OFTP_SEND_ERR ODETTE 43 OFTP_SNDEERP ODETTE 43 OFTP_UN_EERP ODETTE 43 OK_A
32. MS IDB 4 INIT TABLES IDB 5 INP_TIMEOUT CNS 61 INSUFF_PRIV UDIF 46 INSUFF_PRIV UTILS 53 INTERNAL ERROR RC RECEIVER 36 INTERNAL ERROR TEXT RECEIVER 36 I I I I I I I I I I I I zou 3 2 3 2232 NV ACTION UDIF 46 NV_ACTION CNS 62 NV_AP_BUF LOGW 82 NV_CHAR UDIF 49 NV_CMD_RCVD ODETTE 41 NV CMDLINE PARM BATCH 45 NV CMDLINE PARM CNS 62 NV DSN UTILS 53 NV INDICATOR RECEIVER 37 NV KEY ODETTE 41 NV OEXBUF ODETTE 41 NV OID ODETTE 41 T Systems International GmbH Systems INDEX INV PDU ODETTE 41 INV PSW ODETTE 41 INV RECVBUF LOGW 82 INV RVS USER UTILS 53 INV SYNT UTILS 53 INV TIME RVSSTOP 72 INV VERSION MONITOR 12 INV Z REC RECEIVER 37 INVALID CMD DBWD 69 INVALID COLNAME DBWD 69 INVALID COMMAND MONITOR 11 INVALID COMMAND SENDER 32 INVALID CRYPKEY MONITOR 29 INVALID DEST RECEIVER 38 INVALID EXIT CODE MONITOR 11 I I I I I I I I I I I I I I 2232324 IVALID EXIT CODE SENDER 32 IVALID_INPUT DBWD 69 IVALID KEY MONITOR 11 IVALID_LID IDB 5 IVALID_NEIGHB LINE 80 IVALID_NEIGHB SENDER 34 VALID_NUMBER ODETTE 41 IVALID_OEXBUF SENDER 34 IVALID_ORIGIN RECEIVER 38 VALID_PARM DELDB 64 NVALID_PARM LOGW 81 NVALID_PARM RVSSTOP 72 NVALID VALUE S MONITOR 12 NVALID VALUE S SENDER 32 ISDN CHARGE LINE 75 ISDN ERROR LINE 78 ISD
33. N READY LINE 77 IZ COPY FAILED MONITOR 12 IZ COPY FAILED HEX MONITOR 28 IZ DELIVERED MONITOR 12 IZ DS IGNORED MONITOR 13 IZ ENDED MONITOR 19 IZ GRTAUT FAILED MONITOR 12 JS EXEC MONITOR 26 JS JOB MONITOR 27 JS JOBERR MONITOR 27 KEY ALLOC FAILED UTILS 58 KEY DATE OVERLAPPED UTILS 59 KEY DELETE DB FAILED UTILS 58 KEY DUP KEYID UTILS 59 KEY ENTRY NOT FOUND UTILS 58 KEY INSERT DB FAILED UTILS 58 KEY INVALID SID UTILS 58 KEY KEYFILE NOT EXIST UTILS 59 KEY NO VALID LIST UTILS 58 KEY UNKNOWN ERR UTILS 59 KEY WRONG DATE FORMAT UTILS 58 KEYID NOT FOUND MONITOR 29 LGW MONITOR 27 LGW ACTIVE MONITOR 27 LGW START MONITOR 27 LGW_STOPPED MONITOR 27 lt portable rvs 8T LICENSE EXP MONITOR 13 LICENSE WARN MONITOR 13 LIMIT EXCEEDED MONITOR 12 LIMIT VIRTUAL STATIONS EXCEEDED MONITOR 12 LOC RCVEERP ODETTE 44 LOC SEND ODETTE 43 LOG ERROR SYS 61 LOG RECEIVER 35 LOGDUMP MONITOR 30 LTERROR LINE 80 LTRACE LINE 79 LTRACT LINE 80 LU62 ERROR LINE 74 LU62 START LINE 73 LU62 START LINE 74 LU62 STARTR LINE 74 LU62 STOP LINE 73 LU62 STOPR LINE 73 LU62 WARN LINE 74 MakeXX FAILED ODETTE 42 MALLOC FAILED SENDER 32 MANY ROWS UDIF 48 MASKED SIDDEST MONITOR 30 MASKED SIDORIG UTILS 54 MISS RECEIVER UTILS 53 M
34. NATION MONITOR 15 RVSBAT SYS 59 RVSCAL SYS 59 RVSCHECK USAGE CHECK 83 RVSCNS SYS 59 RVSCOM SYS 60 RVSDIA SYS 59 RVSIDB SYS 60 RVSMON SYS 60 RVSRCV SYS 60 RVSSND SYS 60 RVSSQL SYS 60 RVSTCPIP SYS 60 RVSXMT SYS 60 SE2SK FAILED MONITOR 16 SE ENDED MONITOR 19 SE S CREATED UTILS 57 SE SENT MONITOR 16 SEND DUP SID UTILS 55 SEND INV MASK UTILS 55 SEND INV SID UTILS 55 SEND SPAWN FAILED MONITOR 16 SEND STATUS UDIF 47 SENDER STARTED MONITOR 16 SENDER STARTED 08400 MONITOR 16 SENDJOB INV SID UTILS 58 SENDJOB NOT FOUND UTILS 57 SERR CONNECT MONITOR 17 SERR 10 ERR MONITOR 17 SERR_ODETTE MONITOR 18 SERR OPEN ERR MONITOR 18 SERR SEND ERR MONITOR 18 SERR UNKNOWN CODE MONITOR 18 SERR_ZREC MONITOR 18 SESSION ENDED RECEIVER 35 SHOW CAUSE RECEIVER 37 SIGINT SENDER 34 SK ALR CREATED UTILS 56 SK HELD MONITOR 16 SK NOT PENDING MONITOR 16 SK SENT SENDER 34 SNA ERROR LINE 78 SND DISCON FAILED ODETTE 42 SND FAILED ODETTE 42 portable rvs 89 SOCK EXITED LOGW 82 SP START FAILED MONITOR 29 SQL ERROR UTILS 52 SSTATUS UDIF 47 START_ACCEPTED UTILS 56 STARTCNS CNS 62 STAT INCONS MONITOR 22 STATE UDIF 48 STOP CANCEL RVSSTOP 73 STOP DONE RVSSTOP 72 STOP FAILED RVSSTOP 73 STOP INFO RVSSTOP 72 STORE NEIGHB FAILED MONITOR 17 STORE TABLE DBWD
35. OT EXIST E Dataset DSN does not exist Dataset DSN cannot be located Check directory and path or library name specifications FUNCTION FAILED E SAORI IR kK ak Function call FUNCTION ended with return code RC delete database rvsdbdel correct error and rerun rvsidb SEO RRR RR A IR AR Kk The function RVSIDB ended with return code RC This error is either due to e unsufficient memory e non existing directory or library e an ruso system error INIT DONE I FK FK FK FK Initialization of RVS database done Now start the monitor DK OK KK ok ok K FK ok ok ok FK ok FK ok ok FK Initialization of RVS database has been successful completed INIT EMPTY TABLES I Initializing RVS tables RVSIDB initializes the station table and related tables INIT PARMS I Initializing RVS parameters RVSIDB initializes all parameters and stores default values in the database T Systems International GmbH Systems INIT TABLES I Initializing RVS tables commands read from DSN RVSIDB initializes the station table and related tables The initialization comm
36. Odette session has been ended by the remote node due to the specified reason T Systems International GmbH Systems 41 CMD RCVD W OFTP Invalid command buffer CMD received This is not necessarily a real problem but indicates an unclean protocol handshake Kindly report to rvs hot line INVALID NUMBER W Incoming call from SID invalid origin NUMBER INV_OID OFTP Invalid Odette id received from SID OIDR instead of OID The Odette id in for station SID is not correctly defined in either yours or your part ners station table Correct station table accordingly or tell your partner to do so Use the MODST operator command INV PDU E OFTP Invalid PDU received An invalid protocol decription unit PDU has been received Please report to rus hot line INV PSW W OFTP Invalid password received from SID An Odette password for station SID is not correctly defined in either yours or your partners station table Correct station table accordingly or tell your partner to do so Use the MODST operator command Note that there is a difference for passwords to send and to receive Make sure that they are crosswise matching with your partners definitions i e his send must match your receive password and vice versa INV OEXBUF W OFTP Invalid buffersizefor online encryption received from SID bufferlength for online encryption must be at least 278 INV KEY W OFTP k
37. RVSDRU e ervsenv supersede default name of RVS environment dataset e llang set default language for ros B MISSING VALUE E No value specified for command line parameter PARM value was expected for command line parameter given by PARM No value found MISSING INPUT FILE E No value specified for input file Dataset name for input file is not specified TABLE EMPTY I Database table TAB has no entries This message is printed if a database table TAB is empty DUMP DONE I Done with dump of RVS data base portable rvs 68 CHAPTER 1 RVS MESSAGES Dump of RVS database has been successful ended DUMP WRITTEN I RVS database dump is written in data set DSN Shows in which dataset DSN the dump is written DUMP RU DONE Done with dump of RVS RE s and USERS Dump of RVS RE s and USERS has been successful ended DUMP RU WRITTEN 1 RVS RE amp USER dump is written data set DSN Shows in which dataset DSN the dump is written TABLE WRITTEN 1 Table TAB successfully written Informs whether a database table is successful written TABLE_NOT_CLOSED E Cannot close table TAP Database table TAB cannot be closed TABLE NOT OPEN E Cannot open table TAP Table TAB cannot be opened DUMP TABLE I Dump table TAP Dump database table TAB STORE_TABLE 1 Store table TAB Store database table TAB
38. S MESSAGES LU62_START_ I PID Conversation Initiator with SID SID started The local station has successfully initiated an LU 6 2 Conversation with partner station SID PID is the process id of the respective sender task LU62 STARTR I PID Responder started Conversation established An LU 6 2 Receiver or responder task has been started upon an LU 6 2 Allocate request from a remote partner station PID is the process id of the respective TP or responder task LU62 ERROR E PID EXPLAIN An LU 6 2 Error occurred in sender or receiver task with process id PID EXPLAIN is short text describing the specific problem depending om context and system LU62 WARN W PID TEXT An LU 6 2 problem might exist in sender or receiver task with process id PID TEXT is short text describing the specific problem depending on context and system CALL OUT A PID outgoing call to SID TEXT sender process calls this station X25 READY L PID X 25 Receiver ready to accept incoming calls TEXT This message indicates that a prestarted listening X 25 receiver is up and ready to accept incoming calls TEXT may contain further details PID is the process id of the respective X 25 receiver task X25 STOP I PID X 25 Receiver listening for incomming calls has ended This message indicates that a prestarted listening X 25 receiver has ended upon closedown of Monitor or Mastertransmitter Con
39. SAVF FAILED DELDB 65 OPENDB FAILED DELDB 65 OPENDB FAILED RII 71 OTRACT LINE 80 P_OK DELDB 64 PARM_ERR UTILS 53 PARM_UNAVAILABLE MONITOR 15 PARM_UNAVAILABLE SENDER 33 PARM_USED_TWICE DBWD 69 PORTS_EQUAL CHECK 83 PRMCHG_CHANGE MONITOR 28 PRMCHG ERR CRQ MONITOR 28 PRMCHG ERR XMTSTARTFAIL MONITOR 28 PRMCHG ERR XMTSTOPFAIL MONITOR 28 RCAPI_ERR_REG LINE 80 RCAPI_INFO LINE 80 RCAPI READY LINE 80 RCV FAILED ODETTE 42 RE DELTD UDIF 46 RE EXEC MONITOR 15 RE JOB MONITOR 15 RE JOBERR MONITOR 15 RE_JOBERR_OINFL MONITOR 15 RE_NOT_PENDING UDIF 46 RE_UPDTD UDIF 46 RECEIVER NOT FOUND UTILS 55 RECOVER DATABASE DBWD 69 RECOVER DATABASE RII 70 RECOVER DONE DBWD 69 RECOVER DONE RII 71 RECOVER_ERROR DBWD 69 RECOVER_FAILED DBWD 70 RECVR_ADDED UDIF 46 RECVR_DELTD UDIF 46 REPORT MONITOR 15 REPORT DELDB 64 REPORT IDB 5 REPORT RVSSTOP 72 REQUEUE JOB MONITOR 29 T Systems International GmbH rvs Systems INDEX RESENTR INV SID UTILS 55 RESENTR NOT FOUND UTILS 55 RESTORE TABLE X RII 71 RPS STATUS TERM SENDER 33 RPS TERMINATION SENDER 33 RPXCIE FAILED DBWD 70 RVS DISABLED CNS 62 RVS DISABLED UTILS 55 RVS_DUMP_FAILED DELDB 65 RVS IS RUNNING DELDB 65 RVS LOAD DUMP FUNC DELDB 65 RVS LOAD LIB DELDB 65 RVS RUNNINGCHECK FAILED DELDB 65 RVS TERMI
40. Y LINE 81 XOT SND DATA LINE 81 Z PROT ERROR ODETTE 42 7 REC ERROR SENDER 34 Z REC_TOO_LONG SENDER 34 RPXCI MISSING POS PARMS macro 84 RPXCI_RC_DUP_OID macro 84 RPXCI RC DUP SID macro 84 RPXCI_RC_INV_CMD macro 84 RPXCI_RC_INV_PARM macro 84 RPXCI_RC_INV_SYNTAX macro 84 RPXCI_RC_PARM_USED_TWICE macro 84 RPXCI_TOO_MANY_POS_PARMS macro 84 RVSBAT 50 RVSCAL 50 RVSDIA 50 INDEX T Systems International GmbH rvs Systems
41. a distribution list The destination suffering the error will be ignored UTILITY FAILED E rpm PGM failed Internal error Please report to rvs hot line XMT ACTIVE E MasterTransmitter has already been started The command to start MasterTransmitter is ignored because it is already active This should not happen after starting the monitor stop rvs rvsstop delete database rvs dbdel create a new database rusidb and start the monitor XMT START A MasterTransmitter started The command to start MasterTransmitter was successfully executed XMT STOPPED I MasterTransmitter has already been stopped The command to stop MasterTransmitter is ignored because it has been executed before Note that Master Transmitter waits until all active Senders end before it terminates Send errors SERR CONNECT A rpm Unable to connect to SID to send KT CN Connection to station SID could not be established most probable because of a network problem Please ckeck linetrace log for network error messages SERR IO ERR E rpm Unable to read send data set DSN for KT CN Send command terminated There is a problem with the dataset to be sent probably physically damaged deleted or in use by someone else portable rvs 18 CHAPTER 1 RVS MESSAGES SERR OPEN ERR E rpm Unable to open send data set DSN for KT CN Send command terminated There is a problem with the data
42. ages This message will occur when any log file is not available or cannot be written by rus When you are prompted to select an action you may select one of the listed actions having the following meanings R Retry attempted operation on log file after a few seconds If a failure occurs again repeat prompt If successful continue execution W Retry attempted operation on log file after a few minutes If a failure occurs again repeat prompt If successful continue execution I Ignore attempted operation on log file and carry on with execution NOTE Log messages will be lost partially or completely E Exit instantly from executable which caused the error NOTE Log messages will be lost partially or completely 1 10 rvs Operator Console CMD QUEUED Operator command has been queued END END _ Timeout occured while expecting operator command portable rvs 62 CHAPTER 1 RVS MESSAGES INV ACTION Invalid action or keystroke INV CMDLINE PARM E Invalid command line parameter ARGSTR An invalid command line parameter was used Currently supported are eRVSENV supersede default name of RVS environment dataset rSECONDS specify number of seconds for refresh of console output A value of 0 causes the console output not to be updated automatically This parameter is not supported by rus 400 t work in test mode RVS DISABLED O Access to RVS database currently d
43. al parameters an unknown reason RC RC T Systems International GmbH rvs Systems 51 Command CMD failed because of one of the following reasons e There is syntactical error in your command string please check e The specified command is not known please check your spelling e One or more parameters are not valid or mistyped check and correct e One parameter has been specified twice please correct e There are too many positional parameters specified please check e There are less positional parameters specified than needed CMD EXECUTED I Command CMD successfully executed self explaining CMD INV QUAL E Command CMD QUAL not implemented Sorry but the command CMD is not implemented CMD NYI E Command CMD not yet implemented We are awfully sorry The command CMD is foreseen but not yet available We hope to provide it in one of the next release updates DATASET NOT EXIST Dataset DSN does not exist self explaining check path and drive specifications DATASET NOT FV E DSN is not a valid FMT format file You requested to send a file as F or V format data set the record length maximum record length for V is found to be zero or negative however For rvs 2 and rus PC this may occur when you try to send a normal file and specify or V format these files can be sent as T or U format only DB ERROR S RVS database error RC RC Please report to rvs
44. ands are read from data set DSN INVALID LID S Invalid local station id C LID Local station id can consist of up to sixteen characters The local station id i e LID specified when invoking RVSIDB is invalid It can consist of up to sixteen characters Conversion to uppercase is done explicitely MISSING VALUE E No value specified for command line parameter PARM value was expected for command line parameter given by PARM No value found NO ENV DATASET RVS environment data set DSN not found Program stopped execution because RVS environment file could not be located REPORT R TEXT 2 This message is used to report commands read from the file specified with the i option SYNTAX E Invalid command line parameters specified Correct syntax is RVSIDB c 1ean e lt rvsenv gt i lt cmdfile gt l lt language gt lid This message describes the command line parameters and options expected or accepted by RVSIDB e lt rvsenv gt supersede default name of RVS environment dataset default is rusenv dat e i lt cmdfile gt select input dataset to initialize station table and related tables default is rdstat dat e 1 lt language gt set default language for default is e e lid is replaced by your own local station id mandatory paramter portable rvs CHAPTER 1 RVS MESSAGES TABLES CREATED I All RVS database tables successf
45. ction CAPI20 NOLVL3 LINE 76 rvsstop 72 CAPI20 NORES LINE 76 CAPI20 RNODA LINE 76 MESSAGE 20 RTOUT LINE 76 gt CHECK CONN ODETTE 44 No a CHECK PORTS CHECK 82 5 CHECK PORTS OK CHECK 82 DELDB 62 CHECK RVSENV CHECK 83 CLNUP DEL MONITOR 7 Io CLNUP DEL SS MONITOR 7 inen CLNUP_DONE_OK MONITOR 7 MONITOR 6 CLNUP ERR CMD MONITOR 7 CLNUP ERR FETCH MONITOR 7 x CLNUP ERR KT MONITOR 7 CLNUP ERR SL MONITOR 7 2 MONITOR 8 SENDER CLNUP INV DAYS MONITOR 8 MONITOR 8 CLNUP START MONITOR 8 i CLOSEDB FAILED DELDB 65 PETES un CLOSEDB FAILED RII 71 message id MD ALREADY ENDED UTILS 52 MD ERROR UTILS 50 MD EXECUTED UTILS 51 MD FAILED BATCH 44 MD FREED MONITOR 8 MD INCONS MONITOR 23 MD INV QUAL UTILS 51 MD_NYI UTILS 51 MD_QUEUED CNS 61 MD S FREED MONITOR 8 MD TERMINATED MONITOR 8 MDLINE MISSING LANG MONITOR 9 MDLINE UNKNOWN FLAG MONITOR 9 NTL C ENTERED BATCH 45 NTL C ENTERED MONITOR 9 NTL C ENTERED UDIF 49 CONNECT ODETTE 44 CONNECT_END SENDER 34 CONNECT_FAILED ODETTE 39 CONNECT_FAILED_K ODETTE 39 CONNECT_FAILED_RC ODETTE 40 CONNECT_FAILED_T ODETTE 39 A NO DBWD 65 A NO DELDB 62 A YES DBWD 66 A YES DELDB 62 ACC FAILED MONITOR 6 ALTERNATIVE CONN SENDER 35 AUTH UNAVAILABLE MONITOR 6 B
46. e entry T Systems International GmbH Systems KEY DUP KEYID E duplicate key id KEY DATE OVERLAPPED E date range already exists KEY KEYFILE NOT EXIST E keyfile doesn t exist KEY UNKNOWN ERR E unknown error 1 9 rvs System Emergency Messages system emergency messages is sent to the rus operator or user if some resources are not available to a module e g if a the ros log file or the database log file are full The following messages identify the module which sends a system emergency messages RVSBAT O Batch Interface RVSCAL Call Interface RVSCNS O Operator Console RVSDIA O Dialog Interface portable rvs 59 60 RVSIDB Initialize Database RVSMON Monitor RVSRCV Receiver RVSSND Sender RVSSQL O SQL Interface RVSTCPIP O TCP IP Master Server RVSXMT MasterTransmitter RVSCOM Communications Module CHAPTER 1 RVS MESSAGES T Systems International GmbH Systems 61 LOG ERROR 5 S Cannot write to DSN SWITCH REASON no error file or disk locked no access write error maximum number of open files reached file or directory not found disk error disk full unspecified error FCT REASON REASON SYSREASON SYSREASUN Select R etry W ait for 5 min I gnore or E xit WARNING I or E will lead to lost log mess
47. e gt This message describes the command line parameters and options expected or accepted by RVSWDB e erusenv supersede default name of RVS environment dataset e llang use non default language portable rvs 71 72 CHAPTER 1 RVS MESSAGES 1 14 Stop rvs STOP INFO I russtop syntax russtop eRVSENV Aa t zhh mm ss where eRVSENV specifies rus environment data set RVSENV lx uses language for prompts and messages t stops Monitor executing in test mode z specifies time when Monitor is supposed to stop if that time has passed already today the command will be scheduled for tomorrow requests this help information All parameters are optional Example rvsstop ec rustest rusenv dat ld z3 Stop Monitor that uses rvs data base defined in environment data set c rustest rusenv dat use German language for user communications The Monitor is to stop at 3 a m FUNCTION FAILED E CALLER FCT failed with rc RC An internal error occurred Please report to hot line INV_TIME E Unable to interpret time TIME The string specified for parameter z could not be interpreted as time of day Please check your input INVALID_PARM W Invalid command line parameter PARM will be ignored The command line which invoked rvsstop contained a parameter that could not be recognized and will be ignored Please check your input REPORT R TEXT A text i
48. e report to rvs hot line INVALID KEY S RVSENV missing or invalid Please check entries or order a valid key from T Systems portable rvs 12 CHAPTER 1 RVS MESSAGES Make sure the correct environment data set is being used and all fields like CUS TOMER EXPDATE etc contain the proper values Also make sure you are running rus on the system for which it was licensed LIMIT EXCEEDED S Limit of LIMIT partner stations is exceeded LIMIT VIRTUAL STATIONS EXCEEDED S Limit of LIMIT virtual stations is exceeded INV_VERSION 5 Your license key is not valid for this rvs Version VAL Please contact T Systems and request a valid KEY INVALID VALUE S 8 PGM VAR contains invalid value VAL An internal error occurred Please report to rvs hot line IZ_COPY_FAILED E IZ CNIZ could not copy received data set TDSN to ODSN copy return code RC Copy of received dataset to final recipient failed Probable causes are e no space on output disk e illegal specification of target drive or path or target library e loss of authorisation for copy into target library Restart of Momitor could help IZ GRTAUT FAILED E IZ CNIZ could not grant objectauthority AUT to received dataset DSN return code RC Grant objectauthority to received dataset failed Probably causes are e rus is not allowed to grant objectauthority to received dataset IZ DELIVERED
49. en executed portable rvs 20 CHAPTER 1 RVS MESSAGES OK CN ALREADY HELD W CID KT CN already held You entered HOLDCMD CN CN for KT CN which however already is in hold status OK CN FREED A CID freed After FREECMD CN CN command KT CN could be freed from hold status OK_CN HELD A CID KT CN placed in operator hold You entered HOLDCMD CN CN KT CN has successfully been placed in hold OK CN NOT FOUND W CID Command KT CN not found rc RC An operator command was issued against command KT CN which could not be found in the database Check command type and number OK CN W CID KT CN not held status KS cannot be freed After FREECMD CN CN KT CN could not be freed from hold status because it was not in hold status OK CN NOT QUEUED W CID KT CN not queued status KS cannot be held Only commands being in queued state can be held However KT CN was not in queued but in another state like active or pending OK CN SERIAL HOLD W CID KT CN in serialization hold cannot be freed Command KT CN could not be freed from hold status because it is not in operator hold but in system hold because it is serialized to some event another transfer OK_DB_FAILED W CID Data base access failed for KT CN rc RC Internal problem with database or system is short of memory Please report to rvs hot line T Systems Interna
50. ess If RC is zero data have succesfully been transmitted to the neigboring station which however does not neces sarily mean that data have already reached their final destination or recipient This is only the case when a receipt has been received for the transferred dataset If RC is not zero kindly check linetrace log file for network error messages ros 0 will automatically attempt to retransmit the file after a while INVALID NEIGHB E SIDCSID neighbor station not defined SIGINT I Sender terminates operator interrupt received The sender terminates after interruption e g CNTR C SK_SENT R SK CN sent DSNLOCAL to SIDNEIGHB destination SIDDEST as VDSN DTAVAIL sent by UIDSENDER This message indicates the succesful transfer of data to a neigboring node However this does not mean that data have already reached their final destination unless a receipt is received Z_REC_ERROR S rpsozr Unable to generate Z record src line LINE please report to rvs hot line Z REC TOO LONG 5 rpsozr Generated Z record s length LEN gt buffersize src line LINE please report to rvs hot line CONNECT_END I SIDCSID Connection terminated the connection which was established by rvs has been terminated INVALID OEXBUF I Parameter OEXBUF is invalid set to VALUE The parameter OEXBUF is invalid and set to an vald value check the configuration and choose a valid value
51. ey online encryption with station SID not definied key for online encryption not defined ONLINE ENCRYPTION I OFTP For station SID using online encryption with reduced buffersize OEXBUF portable rvs 42 CHAPTER 1 RVS MESSAGES online encryption enabled for partner station MakeXX FAILED E OFTP Unable to create PDU An Odette protocol decription unit PDU could not be created please report to rus hot line ODTID UNKNOWN W OFTP Unknown Odette id ODTID received rc RC Some station tried to open a rys connection with your station However the Odette id ODTID it has transmitted does not match with any entry in your local station table Check your station table and correct accordingly or let the other side do so RCV FAILED E OFTP Unable to receive buffer from SID rc RC during EVENT The local side was in a pending read state waiting for data buffers when the connection broke down Check if partner system and network are still up and running Check linetrace log for network error messages and try to fix the problem SND DISCON FAILED E OFTP Unable to send Disconnect rc RC Probably a network problem ore remote partner has already terminated the connection Check linetrace for network errors and try to fix the problem SND FAILED E OFTP Unable to send buffer rc RC during EVENT The local side was trying to send data buffers when the connection br
52. hot line portable rvs 52 CHAPTER 1 RVS MESSAGES FLUSH CACHE I Cache for CACHE flushed in process PID SQL ERROR S SQL database error RC MSG Please report to rvs hot line DEL NOT UNIQUE E The parameters do not identify unique send request There is more than one entry in the database matching specified search criteria Specify more selective search criteria EFCHECK W EFCHECK set dataset DSN is emtpy Parameter EFCHECK is set to Y and filesize is 0 DONT REM PRIV USER E User USER is privileged and may not remove or change own privileges self explaining DSN INSUFF PRIV E User USER has no privilege to SWITCH ACCESS read delete send as directory dataset DSN self explaining CMD ALREADY ENDED W entry CN already marked as ended An attempt was made to delete end an already ended command DUPLICATE RESENTR E entry for specified values does already exist resident receive entry for specified values of UIDSENDER SIDSENDER VDSN UIDLOCAL does already exist T Systems International GmbH Systems 53 INSUFF PRIV E User USER has unsufficient privilege to use specified value for parameter PARM of CMD self explaining NO PRIVILEG E Not permittet need PRIV self explaining INV DSN E Invalid dataset DSN RC RO The specified dataset name is not valid in the current environment INV RVS USER E User USER
53. ike signaled CAPI20 NORES E Timeout occurred when drawing up the receiver This message indicates that the LISTEN R EQ message was not confirmed by the CAPI during the timeout period The receiver couldn t be established CAPI20 DTOUT E Timeout occurred during send of data This message indicates that the time for the acknowledgement of transmitted data was exceeded T Systems International GmbH Systems 77 CAPI20 DROUT E Timeout occurred during wait for new data This message indicates that a timeout occurred during wait for new data CAPI20 ERROR E CAPI20 Error TEXT An Error occurred CAPI20 sender or receiver task TEXT 45 a short text describing the specific problem depending on context and system ISDN_READY L PID ISDN Receiver ready to accept incoming calls TEXT This message indicates that a prestarted listening ISDN receiver is up and ready to accept incoming calls TEXT may contain further details PID is the process id of the respective ISDN receiver task portable rvs 78 CHAPTER 1 RVS MESSAGES ISDN ERROR E RC NSWITCH RC 202 7 indicate request failed connection timeout mo gt netISDN not running please start netISDN lt gt wrong ISDN card number change LINK NETISDNx in station table unable to allocate buffer failed to assign netISDN unable to send data request unable to request disconnect failed
54. in the current context or an internal error occurred If you are sure that the latter is the case please report to hot line NYI I Sorry selected option not yet implemented T Systems International GmbH Systems 49 We awfully regret but this option is planned for a future release update but is not yet available DSPR_MSGSTAT Dataset has been completely MSWITCHCFLGDELVRD received but is not yet delivered delivered 777 This message tells whether the dataset has been delivered to the receiver DSPR MSGVDSN Dataset received as VDSN IE VDSN VDSN_IE and VDSN ET are the virtual dataset name passed to the receiving station in the ODETTE file transfer protocol VDSN ET differs from VDSN_IE only if the sender has sent the dataset to a list of receivers with different values of DSNNEW DSPR MSGDISP Dataset has been SWITCH FLGIGNORE written to disk ignored Tells whether the dataset has been accepted or ignored after being received completely INV CHAR E Invalid character found in field value FLDVAL This message will appear if invalid character occured in the value FLDVAL of an input field CNTL C ENTERED I Dialog interface terminates CNTL C received CNTL C has been entered by user The dialog interface terminates HELP END SWITCH MORE End of Help More F8 This message is displayed at the bottom of a help mask in
55. ional message which may tell you why OK OPCMD INV TIME E CID Unable to interpret time TIME The string specified for parameter TIME could not be interpreted as time of day Please check your input OK_OPCMD_NO_PARM E CID Required parameter CMD or DSN missing At least one of the parameters CMD and DSN must be specified for command OPCMD OK OPEN FAILED W CID Unable to open file DSN errno ERRNO An operator command that requires an input dataset e g MODST or OPCMD was entered However there is a problem when opening file DSN OK READ A CID CMD Operator command CMD has been checked for correct syntax and is accepted for execu tion OK SID DELETED I CID station id SID removed from data base This appears after operator command DELST SID SID and indicates the sucessful removal of a station with all its parameters from the data base OK SID FREED I CID Suspension of traffic to station id SID has been lifted T Systems International GmbH Systems 25 This message appears after operator command FREECMD SID SID has been issued All transfers to station SID that has been placed in Hold by command HOLDCMD SID SID beforehand will resume OK 510 18 SUSPNDED I 11 traffic to station id SID already suspended Operator command HOLDCMD SID SID has already been issued for this station OK SID NOT FOUND W CID station id SID is not a neighbo
56. is not authorized to use RVS USER is not defined as ros user Hence authorization to use rvs is not granted INV SYNT E Invalid syntax of CMD command Use following syntax See messages SYNTAX PRINT SYNTAX RECEIVER SYNTAX RESENTR SYN TAX SEND SYNTAX START SYNTAX USER below for correct syntax MISSING PARM E Missing value of PARM in command CMD self explaining please check MISS RECEIVER E No receiver specified in SEND command self explaining PARM ERR E Invalid value VAL of PARM in command CMD Creation of the send entry rejected by rvsbat for one of the following reasons e The file to be sent doesn t exist e You don t have read permissions for this file portable rvs 54 CHAPTER 1 RVS MESSAGES NO LICENCE CRYP E No icence for value VAL of PARM in command CMD no request generated self explaining please check NO LICENCE COMP W No icence for value VAL of PARM in command CMD compression request caneled self explaining please check NO LICENCE USERSID W No Licence for value VAL of PARM in command CMD use usersid request caneled self explaining please check NO PERM ULS E No Permission for value VAL of PARM in command CMD Send request caneled The send entry creation was rejected because the name of the file to be sent was not found in the table of the User Level Security FORCED CRYP W Encry
57. is supported MO START FAILED E rpmoms Unable to start new console CID rc RC New console could not be started because of a failing pipe communication with monitor A system error or memory shortage is possibly the reason Please shutdown rus and then reboot your system If problem reoccurs report to rvs hot line MO STARTED A rpmoms New console CID started Process for operator console communication with monitor has successfully been started MO WRITE ERROR E rpmoms Unable to write to console CID handle PIPE portable rvs 14 CHAPTER 1 RVS MESSAGES There is a problem writing to operator console The file handle or communication pipe seems to be broken system error is possibly the reason Please shutdown rus and then reboot your system Make sure rvs has all necessary access rights If problem reoccurs report to hot line NEW CMD CREATED A KTNEW CNNEW created by KTOLD CNOLD This message is issued whenever a new internal command is created as a processable unit of work in response to an event or external command Examples e send command SK will be created after detection of a send order entry SE e Information delivery IZ will be created after detection of incoming informa tion event IE e Receipt sending QS will be initiated after successful termination of an IZ NO NEIGHBOR E No neighboring node defined for station DEST rc RO One reci
58. isabled STARTCNS O Console output re started by monitor 1 11 Delete rvs Database ANO I N YES I Y T Systems International GmbH Systems DBDEL INFO I rvsdbdel call rvsdbdel eRVSENV 1x d dumpfilename f eRVSENV define environmentfile which is to be use 1x define language x for messages and questions print this usage d dump user RE JS und stationstabelle f force deleting without prompting for confirmation b xxxxx force deleting without prompting for confirmation xxxx answers to certain prompts Y or N Delete rvs database Delete all LOG and statistic files Delete all data sets in temp directory Delete all internal status files Delete all internal trace files Example rvsdbdel bYNNNNN will delete the database but not the LOG statistic and temp files a do not check for stopped rvs DEL DONE I rvsdbdel done DEL P Delete rvs data base in DB DEL LOG Delete all LOG and statistic files in DB DEL TEMP P Delete all data sets in TEMP DEL TRACEDIR P Delete all data sets in TEMP DEL STATUSFILES P Delete all internal status files now portable rvs 63 64 CHAPTER 1 RVS MESSAGES FUNCTION FAILED E CALLER FCT failed with rc RC INVALID PARM W Invalid command line parameter PARM will be ignored NO DB I rvs data base in DB does n
59. ith recovery of RVS data base Enter Y or N Continue with recovery of RVS database Y continue N break RPXCIE FAILED E Function rpxcie failed with return code EC Command CMD Function rpxcie failed during command execution Return code RC Command CMD 1 13 Recover Isam Index FUNCTION_FAILED E Function call FUNCTION ended with return code RC The function given by FUNCTION ended with return code RC This error is either due to e unsufficient memory e non existing directory or library e an ruso system error NO_ENV_DATASET E RVS environment data set DSN not found Program stopped execution because RVS environment file could not be located RECOVER DATABASE I Recovering database restore index files of ISAM database T Systems International GmbH Systems RECOVER DONE I Recovery of database completed OPENDB FAILED E Could not open database CLOSEDB FAILED E Could not close database RESTORE TABLE X I Restoring table INDEX COLUMN X I COLUMN is part of primary key NO MORE MEMORY S No more memory available MISSING VALUE E No value specified for command line parameter PARM A value was expected for command line parameter given by PARM No value found SYNTAX WDB E Invalid command line parameters specified Correct syntax is RVSRII e lt rvsenv gt l lt languag
60. ities Please report to rvs support team INVALID ORIGIN E OID OID origin station not defined INVALID DEST E OID OID destination station not defined T Systems International GmbH Systems 1 5 rvs Odette Protocol CONNECT FAILED X E OFTP X25 Unable to connect to SID Reason RC NSWITCH RC 07 X25 clear ALIAS wrong or not configured XADRESS wrong or not configured X25 Timeout ISDNADDR wrong or not configured 77 CONNECT FAILED K E OFTP Unable to connect to SID Reason RC NSWITCH RC 202 7 invalid protocol LU not available NK not available TC not available AC not available XP not available CONNECT FAILED W OFTP TCPIP Unable to connect to SID Reason RC NSWITCH RC 0 open failed alloc failed bind failed connect failed listen failed accept failed receive failed send failed gethost failed no port set sock opt failed close failed Set event failed DE CONNECT_FAILED E OFTP Unable to connect to SID reason see network messages portable rvs 40 CHAPTER 1 RVS MESSAGES check other messages CONNECT FAILED E OFTP Unable to connect to SID errorcode This message indicates a problem in the early stage of connection setup If this does not seem to be a temporary effect it is advisable to initialize trace for linedri
61. ived from SQL Cleanup terminated without deleting anything There might be a consistency problem with your data base CLNUP ERR KT db cleanup Error occured during delete from table KT rc RC During cleanup deletion of entries in the command table KT failed There might be a consistency problem with your data base or the system is short of memory CLNUP ERR SL W db cleanup Error occured during delete from table SL rc RC portable rvs RC CHAPTER 1 RVS MESSAGES During cleanup deletion of entries in the table SL failed There might be a consistency problem with your data base or a system memory shortage CLNUP INV DAYS E db cleanup invalid value DAYS DAYS specify positive number The value entered for parameter DAYS was not a number greater or equal to zero CLNUP NONE A Cleanup of RVS data base ended there no commands to be purged A CLEANUP command has been received However there is no purgable informa tion found with age older than the period specified in the DAYS parameter on the CLEANUP operator command CLNUP START A Cleanup of RVS data base purge all commands with DTDONE lt DTDEL This message indicates that all commands that have successfully been processed or have been placed in deleted status before DTDEL are going to be physically removed from the database CLNUP IE A Command CN Receive from SIDSENDER as VDSN Timestamp DATE is older than TINT
62. mmand TOO MANY RECEIVERS E More than one receiver specified to select SEND command to be processed USER ALR EXIST W User USER does already exist in table of RVS users Change USER self explaining USER NOT EXIST W User USER not found in table of RVS users USER is not defined in rus yet USER I MSG A job has started rvsbat M to post this message to rvs log file SE S CREATED R SE CN serialized with label LABEL created Predecessor is command CNFIRST self explaining DUPLICATE SENDJOB E entry for specified values does already exist A jobstart after send attempts entry for specified values of SID VDSN UID AT TEMPT S does already exist SENDJOB NOT FOUND E Specified jobstart after send attempts entry could not be located self explaining portable rvs 58 CHAPTER 1 RVS MESSAGES SENDJOB INV 51 E Station id SID unknown No matching entry found in RVS station table self explaining SYNTAX SENDJOB I RESENTR qual qual CREATE UPDATE DELETE shows syntax for SENDJOB statement KEY ENTRY NOT FOUND E No matching Entry found KEY ALLOC FAILED E Alloc failed KEY NO VALID LIST E No valid list available KEY WRONG DATE FORMAT E wrong date format KEY INVALID SID E invalid station id KEY INSERT DB FAILED E can t insert into database KEY DELETE DB FAILED E can t delet
63. ndicates that send order SE with number CN has successfully been pro cessed for transmission of dataset DSNLOCAL and the receipt has also been received SENDER STARTED A KT CN Sender started to SID SID SENDER STARTED 08400 A KT CN Job submitted to send to SID This message indicates that a sender task or job has been initiated in order to send kt CN to station SID SEND SPAWN FAILED W KT CN Unable to start Sender system errno err An error occurred when starting a sender task This might be due to a system problem or system limitation of tasks or threads for the 8 account Check system param eters Shutdown 085 and reboot your system If problem pertains please report to rus hot line SK HELD W SK CNSK matching receipt QE CNQE is in hold receipt accepted send command was placed in hold when the transfer has already been successful The receipt therefore is accepted SK NOT PENDING W SK CNSK matched receipt QE CNQE but is not pending status KSSK receipt ignored This should not happen Either your partner for some reason sent a receipt twice or the database or SK entry have been manipulated or a sender has been initiated not by monitor but by hand T Systems International GmbH Systems 17 STORE NEIGHB FAILED E Error storing SIDNEIGHB in ET for SE CNSE rc RO DEST will be ignored An internal error occurred during processing of
64. nding on context and system T Systems International GmbH rvs Systems TCPIP WARN W PID TEXT An TCP IP problem might exist in sender or receiver task with process id PID TEXT is a short text describing the specific problem depending on context and system TCPIP READY L PID TCP IP Receiver COMMNO ready to accept incoming calls TEXT This message indicates that a prestarted listening TCP IP receiver is up and ready to accept incoming calls TEXT may contain further details PID 48 the process id of the respective TCP IP receiver task TCPIP CTOUT E Timeout occurred during set up the TCP IP connection to address This message indicates that a timethe TCP IP connection couldn t be established to NO The connect command was not possible to complete The time passed without any response TCPIP CONNECT E Error occurred during set up the TCP IP connection to address 0 TEXT This message indicates that the TCP IP connection to IP address NO couldn t be es tablished TEXT is the error number and the error code TCPIP_BIND I Error occurred during set up the TCP IP bind to local address 0 TEXT This message indicates that the TCP IP connection to local IP address NO couldn t be established TEXT 4s the error number and the error code X25 WARN W PID TEXT An potential problem was found in X 25 sender or receiver task with process id PID TEXT is a short text describing the specific problem
65. oke down Check if partner system or network are still up and running Check linetrace log for network error Messages Z PROT ERROR 5 OFTP Protocol error sending Z records not allowed The partner side does not support Z records which are reuired for operator messages and distribution lists Do not send operator messages to this station and set up separate send orders for each recipient on this node OFTP SEND 0 Send SK CN DSN from SIDORIG Destination SIDDEST FORMAT RECFM RESTART RESTART T Systems International GmbH Systems 43 LOC SEND 0 local delivery SK CN DSN from SIDORIG Destination SIDDEST FORMAT RECFM OFTP SEND ERR 0 SFNA SK CN DSI from SIDORIG Destination SIDDEST FORMAT RECFM RESTART RESTART failed OFTP END 0 end SK CN status REASON DSN from SIDORIG Destination SIDDEST OFTP END ERR 0 EFNA SK CN status REASON DSN from SIDORIG Destination SIDDEST OFTP RCV 0 Receive DSN from SIDORIG Destination SIDDEST FORMAT RECFM RESTART RESTART IE CN begins OFTP RCV END 0 Receive DSN from SID RIG Destination SIDDEST IE CN ends OFTP SNDEERP 0 Send EERP for DSN TIMESTAMP from SIDORIG Destination SIDDEST OFTP UN EERP W unexpected EERP DSN TIMESTAMP SID RIG SIDDEST OFTP_RCVEERP 0 Receive EERP for DSN TIMESTAMP from SIDOR
66. onal parameters missing positional parameters empty command duplicate SID duplicate ODETTID unknown reason Js Check syntax of statements in input data set The input dataset for station table entries contains a statement with invalid syntax The statement in error can easily be determined from the console output or monitor log All correctly specified statements before the one in error are echoed as a REPORT message OK_MODTR_FAILED W CID modtr failed rc rpxcie RC SWITCH RC invalid syntax unknown command verb unknown parameter parameter specified twice too many positional parameters missing positional parameters empty command duplicate SID duplicate ODETTID unknown reason 22 Check syntax of statements input data set The input dataset for station table entries contains a statement with invalid syntax The statement in error can easily be determined from the console output or monitor log All correctly specified statements before the one in error are echoed as a REPORT message STAT INCONS W Station SID inconsitent defined SWITCH RC E double route in RT correkt rdstat dat T Systems International GmbH Systems 23 CMD INCONS W Inconsitency found at command CMD OK MSG TOO LONG W CID OK CN Message too long truncated An operator message exceeded the maximum possible length of bytes OK NO
67. order to indicate whether there is additional help available via scrolling HELP INV FIELD Sorry no specific help available for selected field This message is displayed if there is no specific paragraph for the selected field within the help text portable rvs 50 CHAPTER 1 RVS MESSAGES HELP NOT AVAIL Sorry no help available This message is displayed if there exists no help text for the current dialog mask HELP PFK LIST SWITCH MORE F1 additional help EXIT This message is displayed at the bottom of a help mask in order to indicate whether there is additional help available via F1 1 8 rvs Internal Utilities These internal rvs utilities are implicitely invoked from e the user dialog interface RVSDIA e the batch interface RVSBAT e the call interface RVSCAL Hence the following messages may occur under all of these environments CANNOT PROCESS Cannot execute because command status is NSWITCHCSTATUS held lt h gt queued lt q gt active lt a gt pending lt p gt ended lt e gt deleted lt d gt suspended lt s gt forwardable lt f gt in transit lt i gt during conversion lt c gt waiting lt w gt unknown self explaining CMD ERROR E Command CMD failed due to SWITCH RC gt invalid syntax unknown command verb unknown parameter parameter specified twice too many positional parameters missing position
68. ot exist NO TEMP I Directory TEMP does not exist NO TRACEDIR 1 Directory TEMP does not exist NO SPDIR I Directory SPDIR does not exist P_OK P Confirm Y N REPORT R TEXT SYS CMD I System command CMD ended with rc RC T Systems International GmbH Systems RVS IS RUNNING I Rvs is running Please stop rvs before you delete the rvs database RVS RUNNINGCHECK FAILED E while checking if rvs is running the error occurs RVS DUMP FAILED E While writing databasedump the error occurs RVS LOAD LIB E Looading of DLL rvscal dll failed RVS LOAD DUMP FUNC E Loading of dumping function failed OPEN SAVF FAILED E Creating LC status file failed OPENDB FAILED E Opening database failed CLOSEDB FAILED E Closing database failed 1 12 Dump and Recover rvs Database ANO I portable rvs 65 66 CHAPTER 1 RVS MESSAGES YES 1 Y DATASET NOT EXIST E Input Dataset DSN not found or does not exist Input dataset DSN for recovery of database is not found or does mot exist NO_ENV_DATASET E RVS environment data set DSN not found Program stopped execution because RVS environment file could not be located DUMP DATABASE I Dump RVS database DB This message is issued when RVSDDB starts to dump the system tables of the database to be used by ros DUMP RU I Dump RE
69. owed by the message class identifier indicating the type of the message The following message classes are used Action security messages Error messages Information messages Messages generated on line level i e X 25 ISDN LU6 2 or TCP IP Messages generated on Odette level Report Severe error Warning continuation line gt This manual is organized in sections according to major rvs components e g Monitor Sender Receiver In each section messages are ordered alphabetically by their message identifier The Message identifier and related class the latter in parantheses are presented underligned and in bold face The next lines contain the message text and the explanation of the message In order to locate a message in this manual search the index for the message identifier and find the respective page number 1 1 Initialize rvs Database CREATING DATABASE I Creating RVS database DB This message is issued when RVSIDB starts to create the system tables of the database to be used by ros RVSIDB performs this step for an ISAM database only CREATING TABLES 1 Creating RVS database tables RVSIDB starts to create the database tables used by the rus application programs portable rvs CHAPTER 1 RVS MESSAGES DATABASE CREATED I RVS database DB created successfully The system tables for the ISAM database have been created successfully by RVSIDB DATASET N
70. pient ignored for SE CNSE internal error occurred when processing a distribution list for a transfer recepient who suffered the error is ignored Please report to rvs hot line NO RCPT W No recipient defined for CMD CN An internal error occurred Please report to hot line NO SK FOR QE I No matching SK found for receipt QE CM receipt for a sent dataset has been received however there is no pending send com mand SK that matches Receipt is ignored This can happen only when the database has been recreated or the related SK has been deleted by operator or after system abends NOT_AUTH B ORIG not authorized to command TYPE CMDNUM Internal authorization ckecking detected command from originator ORIG having no autority NO_DS_AUTH B AGENT not authorized to access data set DS mode MODE T Systems International GmbH Systems 15 AGENT tried to access dataset DS with mode MODE without having authorization MODE can be for allocate for writing access PARM UNAVAILABLE E PGM PARM unavailable Internal error A parameter was refenced that does not exist please report to rus hot line REPORT R TEXT This message appears to report and log changes to station table or other rvs param eters as well as commands executed from an command input dataset TEXT contains the details RE EXEC A RECCNRE executed by IZ CNIZ
71. portable Release 5 07 Messages and Codes T Systems International GmbH 2012 March 9 2012 products listed in this manual are protected by copyright rvs Version 5 07 Messages and Codes 2012 by T Systems International GmbH Holzhauser Str 4 8 13509 Berlin This manual is protected by copyright All rights reserved No part of this book may be used or reproduced in any form or by any means including photocopies microfilm or any other means or stored in a database or retrieval system without obtaining prior permission from T Systems Rights are also reserved as far as lectures radio and television is concerned We reserve the right to make changes to the content of this manual without giving prior notice T Systems is not liable for technical or printing errors or defects in this manual Moreover T Systems shall not be liable for damage which is directly or indirectly caused by delivery performance and use of this material portable rvs Contents 1 rvs Messages 1 1 Initialize Databases 5S RA 1 2 EV Sm MONITORS a 5 af LAS A L3 rvs Gender eem p moererezebubce wow ws Wwe Ret e m SUE dede dh I ISl nu MT a a Ee ha ote oh ee Ga A Gee er a AR 1 5 rvs Odette Protocol m since p be wm ede 1 6 rvs B Batch Interface 4 amp 4 4 coco eU a Ro d xm 1
72. ption for destination of command CMD configured and added self explaining please check MASKED SIDORIG W Sendentry CMD with SIDORIGIN SID generated self explaining please check NOCRYP E Encryption for destination of command CMD desired and not configured self explaining please check NOULS E User level security for destination of command CMD necessary but not given The send entry was not created because in the T R table of the User Level Security is no matching configuration entry T Systems International GmbH Systems 55 VAL NOT SUPP W Value VAL of PARM in command CMD not supported use DEFAULT self explaining please check RECEIVER NOT FOUND E Specified receiver could not be located specified receiver could not be found in data base Check spelling of station or check station table for completeness RESENTR INV SID E Station id SID unknown No matching entry found in RVS station table self explaining RESENTR NOT FOUND E Specified resident receive entry could not be located self explaining RVS_DISABLED E Access to RVS currently disabled Your rvs administrator or operator currently has disabled access to ros B probably because he is backing up the database or fixing a problem SEND DUP SID E duplicate station id SID attempt was made to insert a receiver which already exists in the distribution list SEND INV SID E
73. r to this local station The HOLDCMD SID SID command is valid only for directly neigboring stations However statin SID can be reached only via another station OK_SID_NOT_FREED W CID SID not freed data base update failed with rc RC There might be a problem with your database Please report to rvs hot line OK SID NOT HELD W Traffic to station id SID cannot be freed it is not suspended self explaining OK SID NOT SUSPND CID SID not suspended data base update failed with rc RC Suspension of traffic to a neigboring station did not succeed Try again If problem reoccurs there might be a problem with your database Please report to rvs hot line OK SID SUSPND I 11 traffic to station id SID will be suspended This message is issued after an operator command HOLDCMD SID SID was issued OK SQL ERROR W CID CMD data base access failed for SQL RC There might be a problem with your database or system is short of memory Please report to rus hot line OK SUSPND NOT SUPP Suspension of traffic to neighbor not supported in test mode portable rvs 26 CHAPTER 1 RVS MESSAGES Should not occur in normal production mode OK TERMIN I CID Enter command use CNTL Z instead to resume normal operations OK TERMIN is used in rvs PC only where the monitor waits for more console input until CTL Z is entered OK ACTIVATE I connec
74. receive entry was successful or not RE_UPDTD SWITCH RC UPDATED UPDATE FAILED This message indicates wether an update of a resident receive entry was succesfful or not RE_NOT_PENDING No matching resident receive entry found with status pending You tried to update delete or query a resident receive entry which under normal conditions must have status pending UNIT SWITCH FLGREC bytes blocks Tells which kind of space units is in use e g bytes or blocks T Systems International GmbH rvs Systems 47 SSTATUS SWITCH STAT_IE_SE H Q A P E D 8 F 1 SWITCH STAT_ET H Q A P E D S F I SWITCH STAT_IZ_SK H Q A P E D S F 1 C W X Y Short form of status held queued active pending ended deleted suspended for wardable in transit see also next message below SEND_STATUS SE SWITCH STAT_SE held queued active pending ended deleted suspended forwardable in transit 7 ET SWITCH STAT_ET held queued active pending ended deleted suspended forwardable in transit 7 SK SWITCH STAT_SK gt held queued active pending ended deleted suspended forwardable in transit in conversion waiting inactiv EFID gap lt Long form of status message HELD command was put in hold status it cannot be processed until freed QUEUED ready to be processed ACTIVE the command is being processed PENDING processing partially complete ENDED proces
75. receiver task RCAPI ERR REG E PID CAPI register for CAPI HOST gt HOST lt CAPI PORT gt PORT lt failed error gt ERR lt register to CAPI failed RCAPI INFO L PID INFOTEXT Shows CAPI DISCONNECT IND info X25 ERR CAUSE E PID X 25 error cause ERRNUM TEXT T Systems International GmbH Systems 81 Shows X 25 error cause 125 ERR DIAG E PID X 25 error diagnostic ERRNUM TEXT Shows X 25 error diagnostic XOT CON RCV E Error occurred during set up the XOT connection receiver TEXT XOT CON SND E Error occurred during set up the XOT connection Sender TEXT XOT RCV DATA E Error occurred during receive of data TEXT XOT SND DATA E Error occurred during send of data TEXT XOT READY L PID Receiver ready to accept incoming calls Port PORT 1 16 rvs LogWriter FUNCTION FAILED E rvslgw CALLER FCT failed with rc RC An internal error occurred Please report to rvs hot line INVALID PARM W LogWriter called with invalid command line parameter PARM This parameter will be ignored portable rvs 82 CHAPTER 1 RVS MESSAGES If this error occurs when Log Writer is started by Monitor please inform rvs hot line SOCK EXITED D LogWriter socket thread exited with rc RC An internal non fatal error occured INV RECVBUF E LogWriter FCT invalid buffer received error in CALLED leng
76. s brought to your attention STOP DONE I Command to stop Monitor at TIME stored in data base DB Confirmation that STOP command has been scheduled T Systems International GmbH Systems STOP CANCEL I Command to stop Monitor at TIME endet due to no monitor is running stop Command endet due to no monitor is running STOP FAILED E Unable to schedule STOP command For some reason russtop could not store command in data base check other messages to find out why 1 15 rvs Linedriver NO LICENCE LINE E The protocol SWITCH PROT 1062 RVSTCPIP TCPIP XOT ISDN X25 is not licenced please ask for new licence key LU62_STOP I PID Conversation with SID SID ended An LU 6 2 Conversation with remote station SID has been ended The local station was the initiator of the conversation PID is the process id of the respective sender task LU62 STOPR I PID Conversation Responder ended An LU 6 2 Conversation has been ended the local station was the responder i e receiver PID is the process id of the respective TP or responder task LU62 START I PID Conversation Initiator with SID SID started LU LU MODE MODE The local station has successfully initiated an LU 6 2 Conversation with partner station SID The partners LU Name is LU and the LOGMODE in use is MODE PID is the process id of the respective sender task portable rvs 74 CHAPTER 1 RV
77. sequently no more incoming calls can be accepted PID is the process id of the respective X 25 receiver task T Systems International GmbH Systems 75 X25 IN OK A PID Incoming X 25 call from DTE DTE accepted This message indicates that an X 25 Call packet has been received from a remote station with X 25 DTE address DTE and the call has been accepted by the local station PID is the process id of the respective X 25 receiver task X25 0UTGING CALL A Outgoing Call to SIDN use local XP LOCXP remote XP REMXP TCPIP OUTGING CALL A Outgoing Call to SIDN use local IP LOCIP remote IP REMIP X25 IN REJCT W PID Incoming X 25 call from DTE DTE rejected reason TEXT This message indicates that an incoming X 25 Call packet from a remote station with X 25 DT E address DTE has not been honored because of the reason given in TEXT PID is the process id of the respective X 25 receiver task X25 CALL OK I PID X 25 Connection established to SID SID DTE DTE This message indicates that an outgoing X 25 call to station with DTE address DTE has successfullly been sent and a call connect packet indicating succesful establishment of X 25 connection has been received PID is the process id of the respective X 25 sender task X25 ERROR E PID TEXT An Error occurred X 25 sender or receiver task with process id PID TEXT is a short text describing the specific problem depending on context
78. set to be sent probably physically damaged deleted or in use by someone else SERR SEND ERR I rpm Error during transmission of KT CN to SID There is a problem with the dataset to be sent probably physically damaged deleted or in use by someone else SERR UNKNOWN CODE S rpm KT CN contains unknown send error code EC An internal error occurred Please report to rvs hot line SERR_ZREC_ 1 rpm Node SID does not accept Z records KT CM An attempt was made to initiate a transfer with Z records to a node that does not support these Only nodes running portable rvs versions presently support Z records Z record are used to handle distribution lists i e multiple recipients for a single dataset and operator messages to other nodes Avoid to use operator messages and distribution lists with node SID SERR_ODETTE E rpm Node SID rejected Odette transfer for KT CN Error ERR SWITCH XFNA gt 227 Send File Negative Answer retry allowed Send File Negative Answer retry not allowed End File Negative Answer SWITCH ERR Tp invalid filename invalid destination invalid origin Storage record format not supported maximum record length not supported file size is too big invalid record count invalid byte count access method failure duplicate file unspecified reason T Systems International GmbH Systems 19 The Odette file transfer
79. sing of the command ended DELETED this entry was logically deleted SUSPENDED this entry was suspended temporarily FORWARDABLE command forwarded to master transmitter IN TRANSIT being processed by sender DSN DISP Dataset will be SWITCH DISP kept deleted after transmission This message indicates what will be done with the dataset after transmission This depends on the setting of the DISPOSITION parameter the send a dataset primary menue VIRTUAL DSN New dataset name is VDSN The dataset to be transferred has been assigned to the virtual dataset name VDSN portable rvs 48 CHAPTER 1 RVS MESSAGES BAD CHOICE Command not supported You pressed a function key or selected a function not supported in the current context MANY ROWS To many rows selected self explaining NO SELECT No row is selected On menue displaying a list of items for further selection for example after display of transmissions to a certain node you pressed the ENTER key without having anything selected TABLE ROWS NSWITCHCROW MAX No Data 1 row Row ROUW MIN ROW MAX SWITCH EOT page up down F7 F8 End of table reached Messages for Cases of Severe Errors FATAL S Fatal Error Occured please report to rvs hot line ERROR S Unexpected Error Occurred please report to rvs hot line STATE 9 Unknown State or Keystroke You probably have pressed a key which is not allowed
80. t to station SID sender process will start to connect to this station All queued filed will be transmit ted OK HELP I List of available operator commands All available operator commands are listed OK HELP MORE I ARGSTR Further help to operator commands is given OK HELP_CMD I The command OPCMD expects ARGSTR positional parameters A support to a certain operator command is displayed OK HELP PARM I non repeatable keyword parameters ARGSTR The non repeatable keyword parameters are listed OK HELP RPARM 1 repeatable keyword parameters ARGSTR The repeatable keyword parameters are listed JS EXEC A JS CNJS executed by SK CNSK This message indicates that a jobstart after a send attempt entry with number CNJS was found to match incoming information criteria and therefore was executed T Systems International GmbH rvs Systems 27 JS JOB A JS CNJS starts DSNTEMP for SK CWSK JS JOBERR E Error during start of DSNTEMP JS CNJS SK CNSK LGW 1 MSG A message was found in the LM table Messages are only saved to the LM Table if something went wrong with the Log Writer LGW_ACTIVE E LogWriter has already been started The command to start LogWriter is ignored because it is already active This should not happen after starting the monitor stop rvs russtop delete database rvsdbdel create a new database rusidb and start the monitor L
81. th LEN Log Writer received an invalid buffer Please report to rvs hot line INV_AP_BUF E LogWriter FCT invalid ActivePanel buffer error in CALLED length LEN Log Writer created an invalid ActivePanel buffer Please report to rvs hot line 1 17 rvscheck CHECK PORTS I check ports of rvs The two rus TCP IP ports are the LogWriter port and the ODETTE port These ports must be different The default value for ODETTE port is 3305 for Log Writer 2956 CHECK PORTS OK I check ports of rvs ok The check of the rvs TCP IP ports was succesfull NO LGW PORT E can t get port of rvslgw You should check the enviroment file rusenv dat for the value of the parameter PORT That s the LogWriter port The default value is 2956 GET LID FAILED E can t get the name of the local station rc RC The name of the local station LID was not found in the station table rdstat dat line TC T Systems International GmbH Systems PORTS EQUAL E port of rvslgw and odette port are equal port PORTNUM RVSCHECK USAGE I rvscheck call rvscheck 1x v define language x for messages and questions print this usage v set verbose mode CHECK_RVSENV I check rvsenv dat MISSED ENTRY E entry KEY missed in rvsenv dat EQUAL VALUE W Values in KEY1 und KEY2 are equal portable rvs 83 84 Chapter 2 CHAPTER 2 RETURN CODES
82. tional GmbH rvs Systems 21 OK DBV R CID Data base for DBV created at DATE Echo of version and creation date of your current data base OK_INVALID_STATUS W STATUS STATUS is not a status The Value for STATUS is not a status OK_INVALID_CN W CN is not a command number The Value for CN is not a real command number OK INVALID DSN DSN DSN is Dataset the Value for DSN is no Dataset OK INVALID PARM W CID Invalid parameter name PARM An operator command was entered with an invalid parameter name specified Valid parameter names can be obtained via Operator command LISTPARM ALL or refer to User Manual OK INVALID SYNTAX E CID Syntax of CMD is invalid rc rpxcie RC NSWITCH RC invalid syntax unknown command verb unknown parameter parameter specified twice too many positional parameters missing positional parameters unknown reason Syntax of an operator command was not correct Please refer to User Manual OK LISTST FAILED W CID listst failed rc rpmrls RO portable rvs 22 CHAPTER 1 RVS MESSAGES The attempt to list the parameters of a certain station failed Check for correctness of the SID parameter OK MODST FAILED W CID modst failed rc rpxcie RC SWITCH RC invalid syntax unknown command verb unknown parameter parameter specified twice too many positi
83. to assign netISDN B channel level 3 call request failed connect request failed call resume failed connect resume failed assign task failed partner busy or transmission error hangup request failed end request by mastertransmitter programm stopped error invalid NCCI code error in message exchange see message log no data while receive received buffer too long connection timeout cannot connect or setup ISDN card please check parameter hangup received check ISDN number disconnected with CAUSE DIAGNOSTIC B the netISDN version of rvs is not installed Layer 1 error please check cable etc Timeout occurred during connection Error during CAPI initialisation CAPI not running Error in semaphore handling Error in DosLoadModule CAPI not running Error in DosQueryProcAddr CAPI not running Error during initialisation CAPI REGISTER CAPI not running common or ISDN error see message log An Error occurred in ISDN sender or receiver task with process id PID TEXT is a short text describing the specific problem depending on context and system SNA ERROR E TEXT An Error occurred in SNA sender or receiver task TEXT is a short text describing the specific problem depending on context and system TCPIP_ERROR E TEXT An Error occurred in TCP IP sender or receiver task with process id PID TEXT is a short text describing the specific problem depe
84. ully created RVSIDB has created all database tables needed by UNDEFINED LID S OO Undefined local station id LID must be defined in the stationtable rdstat dat k kk kkk kkk local station ID is not defined in the station table 1 2 rvs Monitor ACC FAILED W Account exit rvsacc failed for CMD CN with rc RC account exit program rusacc returned a nonzero return code for the rus com mand CMD with command number CN Possible causes are e problem in user written exit routine if you have replaced the standard accounting exit by own code e with the standard exit when CMD is other than SK or IZ please report AUTH UNAVAILABLE W dispatch check auth authority for command could not be determined Command rejected The rvs monitor encountered an external command KN the originator of which could not be determined due to some internal error Should not occur BB DONE A User message BB CM successfully delivered to UID at SID user notification e g after successful processing of a send order has successfully been delivered to user UID BB FAILED W Unable to deliver user message BB CN to UI
85. ver and Odette FTP If SID is network this indicates a problem with the local side being receiver The receiver could be started but was not able to start data exchange Check linedriver log for error loggings If SID is a valid station id we are the sender In most cases the problem is located in the network or results from faulty network parameters Check status of network devices For LU 6 2 check definitions for SYCLEVEL LUNAME MODE TPNAME and security information For connection test use the ACTIVATE command for example rvscom SID INCOMING_CALL I Incoming call received OAD DATA ERROR E OFTP Error creating or sending data buffers This message usually indicates a hard disruption of a running communication For example if the target system abends or the network fails Another reason could be a problem with your input dataset DB ERROR E OFTP Data base access error rc RC during EVENT PARM Check if system is not short of memory Please report to hot line ESID ERROR W Odette session ended by remote node SID Reason REASON SWITCH REASON normal session termination unknown command code in NSDU unexpected command code in NSDU invalid Odette ID invalid password local site emergency closedown NSDU contains invalid data NSDU size error resources not available time out mode or capabilities incompatible unspecified abort code The

- ServiceNet - T

Contents

Download Pdf Manuals

Related Search

Related Contents