INSTALLATION GUIDE
Contents
1. INSTALLATION GUIDE A CAUTION Please read the USER S MANUAL DISCLAIMER OR RELEASE OF LIABILITY WARRANTY AND RETURN POLICY located inside the Micro SD Card in the WEAPONEYE or on the website http www weaponeye com otherwise do not use the WEAPONEYE Set the toggle switches to ON position UP Toggle Switches Congratulations Your 1 CAMERA 2 FLASHLIGHT WEAPONEYE is now ready for use 3 LASER SIGHT WEAPONEYE PARTS Notes The WEAPONEYE will start recording 4 to 5 seconds after the activation switch is pressed We recommend keeping all toggle switches at the ON position at all times Before taking the WEAPONEYE with you please make sure the Micro SD card is N i properly seated and the battery is fully j Activation Switch Reset Button char ged Toggle Swatches ON OFF Screw to adjust Laser WINDAGE Micro SD Card Slot USB Port Please visit www weaponeye com for Screw to adjust Laser ELEVATION more detail and updated information LASER RADIATION AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION DO NOT STARE INTO BEAM MAXIMUM OUTPUT lt 5mW Chareme Recordimg Deactivation Button Indicator2. INSTALLATION GUIDE A CAUTION Please read the USER S MANUAL DISCLAIMER OR RELEASE OF LIABILITY WARRANTY AND RETURN POLICY located inside the Micro SD Card in the WEAPONEYE or on the website http www weaponeye com otherwise do not use the WEAPONEYE BATTERY PACK USB CABLE Step 1 You will see your WEAPONEYE in its Step 2 Remove WEAPONEYE from the foam bed WEAPONEYE BATTERY PACK shaped foam bed and remove the screws HOLSTER 7 CHARGER SCREWS SCREWDRIVER MEMORY CARD HEX KEY MEMORY CARD ADAPTER WEAPONEYE USB CABLE FOR DATA AND CHARGING lt amp CAUTION Please verify that your Step 3 Make sure your firearm is unloaded to FIREARM is unloaded and the magazine has prevent accidental discharges Install the 3 been removed before you install the new shorter screws in the 3 holes at the back of the WEAPONEYE no bullets whatsoever Do WEAPONEYE and 3 larger screws at front not install WEAPONEYE on a loaded Attach the WEAPONEYE to your Firearm as Firearm shown in figure 5 Please adjust the screws gently until they are completely in and tight Connect one end of the USB cable into the USB port in the WEAPONEYE and the other end into the battery charger and then connect the battery charger to a power outlet Once the WEAPONEYE is connected to the power source the red light will turn on k indicating the battery is charging Once the battery is fully charged the red light FIGURE 5 will turn off LARGER SCREWS SMALL SCREWS
Download Pdf Manuals
Related Search