Home

FH User Guide - FIREHOUSE Software

1. Press either NFIRS Incident Reports EMS Search amp Rescue Incident Reports or Dispatch Remote Station Incident Reports highlight a record then press OK Check Count this activity as part of incident response to include staff added to this activity in incident counts The values added to the Default Values area fields are added to each staff member record added for the activity If necessary you can edit the values for specific participant detail records Type or look up the Station Shift Unit of staff members added to the activity If most staff share a particular station shift or unit add values to these fields These fields can be left empty Type the number of Hours Worked for staff members added to the activity can be different than hours paid Note that depending on the activity the Hours Worked value may be greater than zero even if the participant did not actually work such as the instance of an activity for sick leave Select at least one Activity Type Select any combination of Fire Rescue Medical Other depending on the type s that best describe the activity Note that the selection will be used in reports to determine incident type counts Check Attendance Required if appropriate Enter default participant payroll values in the Payroll Calculation area See the FH Help File Pay topic for additional information on payroll calculations To add one staff member press Add The Attendee D
2. Type or look up the Affiliation code Specify the injury date and time Check Same as Alarm to enter alarm date Note that the date and time could be before or after the alarm time shown on the Basic section of the main incident form Type or look up a Severity of Injury code to best indicate the severity of the injury Required O Adding NFIRS 5 0 Incident Reports 155 156 Type or look up a Cause of Injury code that best indicates the main cause of injury Type or look up Human Factors Contributing to Injury codes Click the Injury tab Complete Factors Contributing to Injury area Type or look up a Code that best describes factors contributing to the injury If there were no factors check None Type or look up an Activity When Injured code that best describes the activity of the casualty when injured Complete General Locations area fields Type or look up a Location At Time of Incident code that best describes the location of the casualty with relation to the area of fire origin and whether the casualty was involved with the ignition of the fire Type or look up a General Location at Time Of Injury code that best describes the casualty s general location at the time of injury Complete Specific Locations area values Ifthe injury occurred inside a structure type the Story at Start of Incident If the story is below grade check Below Grade Ifthe injury occurred in a struct
3. 0000 Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Clinical tab Provider tab Type or look up the Initial EMS level of the first EMS care provider to arrive at the patient victim and the Highest level of EMS care provider Type or look up the Provider Impression area Primary provider impression code indicating the provider s primary assessment of the cause of the patient victim s symptoms Select values for CMS Condition Codes Patient Staff Exposures and Exposure Precautions Taken areas and add details if Yes You can add all responding personnel when adding an exposures and or precaution detail record by selecting All All Responding Personnel Responding Personnel from the Staff ID lookup Complete other fields as needed Save and close To Add Injury Illness Details 0000 O From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Clinical tab Injury Illness Codes tab Press Add to add a injury illness detail or Add G
4. About Users You can add many different users each with their own security levels Note that the record modification history will not identify specific individuals unless user names are set up for each user To Add Administrative User K DANGER gt Do not lose the administrative account user names and a Loa f passwords These should be stored in a secure location Administrative User Name and Passwords Select the Administration menu Users and Security option The Users and Security form is displayed Press New The User Setup form is displayed with the cursor in the User Name field Type the user name then press Enter If passwords are required via the Administrative Options form General section press Set Password type the password for the user in the Password field then type the password again in Confirm Password then press OK Certain password complexity requirements may also be specified in the Administrative Options form See To Specify Security Options on page 42 for the steps to require a password and to specify password complexity requirements Press Link to Staff ID to associate the login with a specific staff member When a Staff ID is associated with a login you can add staff name to reports and queries that include user records Type or look up an FDID associated with the user Check Full Administrative Access to give the user complete rights to the program including the ability to modify
5. From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click Units amp Personnel tab Press Aid Given Received Details to display a listing of mutual aid given or received Press Add or Add Group The Aid Given or Received Detail form is displayed Type or lookup the Department Unit Code for the department or unit that either provided or received mutual aid Note that additional data elements required for mutual aid given or received departments are added as part of the Department Unit Code lookup setup Complete Response Times area fields The incident record s Alarm Date is associated with each completed time field by default press the time field s lookup button to change the date Complete Resources area fields If you give aid you may choose to report your own resources Similarly if you receive aid you may choose whether to count only your own resources or those of the aid giving department as well The aid receiving department should always report all casualties other than the fire service casualties of the aid giving department Each department reports its own fire service casualties Type Their Incident Number If you gave aid to another fire d
6. Send messages to specific users staff within FH FH messaging creates multiple notes on save so they can be deleted individually FH Internal Messages can be sent to all FH users specific staff members by name station assignment rank status if a Staff ID is associated with an FH user login record or specific users or user groups if you do not associate Staff ID with FH login records FH Messaging checks for unread messages at a user defined interval and automatically displays a message when a message for the currently logged in user is received To Specify Internal Messaging Select the Tools menu Workstation Options option Click the Other tab then select the Internal Messaging tab Check Enable Message Polling and specify an interval in minutes to check for new messages at the specified interval Press OK About Toolbars Toolbars list commonly used options and access major data entry forms You can modify toolbar appearance or add new toolbars To Customize Toolbars Select the Tools menu Workstation Options option Press Customize Toolbars to modify existing toolbars or add new toolbars The Customize Toolbars form is displayed Press F1 and review the Customize Toolbars topic in the FH Help File for step by step instructions for modifying and adding toolbars Press Close Press OK About Default Workstation Options FH is sent out with default options If you have experimented wit
7. Type or look up Shift s to filter the department journal for specific shifts Type or look up Unit s to filter the department journal for specific units Type or look up Staff Member s to filter the department journal for specific staff member activities Check Ignore items without Station Shift or Unit to exclude events with blank Station Shift or Unit values only events that have an explicit match in Station Shift or Unit are included Press Apply Filter to apply entered values and view results Press Close to close the Filtering Options form Press Close if finished O00 To Set Shift Times Select the File menu Department Journal option The current year s month is displayed with the current day highlighted Events for the highlighted day are displayed to the right Press Shift Times The Shift Times form is displayed Type the Shift Length and Start Time Press Apply Filter to apply entered values and view results Press Close to close the Shift Times form Press Close to close the Department Journal form OOOo6080 To Specify Event Types to Display Select the File menu Department Journal option The current year s month is displayed with the current day highlighted Events for the highlighted day are displayed to the right Select the event types to include in the journal A specific event is selected when it is pressed down like this Press to include fire incident
8. Administrative Options form Inventory section Personal Protective Equipment Track the use of consumables used for this maintenance test in the Usage section Type additional information about the maintenance test in the Notes section Add user fields add attached files access record modification HEH history and add staff activities for this maintenance test in the Other section Save and close maintenance test detail record Save and close inventory record Understanding Inventory Records 103 104 To Add Scheduled Maintenance O O O From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option Ifthe Inventory form is displayed press Browse or Ctrl O select record and press OK Ifthe Query form is displayed select record and press OK Click the Maintenance Test tab Press Add located below the Scheduled Maintenance area to schedule maintenance or testing The Scheduled Maintenance Test Detail form is displayed Maintenance records added to the Scheduled Maintenance section do not create maintenance records in the Maintenance section You must run a report to identify when a scheduled maintenance record is due Type or lookup the Job Code for the maintenance or testing Enter Performance Interval values Ifyou enter a value in Mileage Interval the maintenance testing indicates th
9. Queries that display equipment records can be modified so they exclude equipment marked as hidden Specify the Quantity Unit indicating the unit of measure associated with the inventory for example Ouarts This value is displayed after Quantity fields in usage detail records Last Meter Reading fields and Last Maintenance Test fields are displayed for reference purposes Press Save then close the inventory record Understanding Inventory Records 99 100 About Generic Equipment Generic equipment is a class or group of equipment that is usually not kept in the same location Once you have added the generic equipment record entered as a standard inventory record with Generic Equipment checked you can add this generic equipment to the inventory record that the generic equipment is located on If you have set up Equipment Location lookup codes specifically for the primary apparatus and run the Apparatus Inventory Checklist report all generic equipment and equipment linked to the main apparatus will be listed by the equipment location Note that for this to work properly you should set up the equipment location codes so they are sorted as the locations would be situated during an inventory check that is walk from one location to the next To Add Generic Inventory Record From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option If
10. To Lock Occupancy Record 129 To Review Record Modification History 129 About Multi Occupancy Property Records 129 To Add New Multi Occupancy Property Record Existing Occupancy 130 To Add New Occupancy to Multi Occupancy Property Record 130 To Link Existing Occupancy to Multi Occupancy Property Record 130 To Remove Occupancy from Multi Occupancy Property Record 131 To Review All Contacts Preplans and Responses 131 NFIRS Incident Reporting Section Understanding NFIRS 5 0 Incident Reports 134 Standard Lookup Code Entries 135 Adding NFIRS 5 0 Incident Reports 136 To Create a New Basic Incident 136 About Responding Personnel and Units 140 To Complete Aid Given Received Details 140 To Add Multiple Responding Units 141 To Add a Single Responding Unit 143 To Edit a Single Responding Unit 145 To Edit All Responding Units 145 To Add Staff Activities 146 About Incident Response Information 147 To Add Incident Response Information 147 About Incident Property Information 149 To Add Incident Property Information 149 About Involvements 150 To Add Incident Involvement Information 150 About Fire Reports 150 To Add Fire Report 151 About Structure Fire Reports 153 To Add Structure Fire Report 153 About Fire Casualty Reports 155 To Add Civilian Fire Casualty Report 155 To Add Fire Service Casualty Report 156 About EMS Search amp Rescue Reports 158 Contents 4 To Add EMS Search amp Rescue Report About HazMat Reports To Add Haz
11. Training programs are set up as follows Set up Training Category codes and Staff Activity codes for certification requirements Add a training program including training activity and elective requirements number of hours required for each training activity or elective or check Skills Based to accept when objective is met regardless of hours staff members enrolled in the training program FH automatically tracks staff member training and staff activities When a training activity record with the required training category code and the staff member is added to FH the number of hours credited for the class is automatically subtracted from the corresponding required time in the training program When the staff member has taken the number of hours or more in the training category required in the training program they are recorded as having satisfied this particular requirement The same is true when a staff activity record for a staff member enrolled in a training program is added using the staff activity code set up as a training program requirement When a training activity record with a training category code within a training category code group added as an elective and the staff member is added to FH the number of hours credited for the class is automatically subtracted from the corresponding required time in the training program Note that if a specific training category is required for a training program AND
12. You can review a list of modifications made to the record Occupancy Management To Lock Occupancy Record From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Other tab Press Record Lock Status Check Lock Record then press OK Press F1 for more information Save and close To Review Record Modification History From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Other tab Press Record Modification History The Record Modification History form is displayed The amount of information displayed depends on the level of tracking selected from the Administrative Options form Database section Press Close Press F1 for more information O About Multi Occupancy Property Records Multi occupancy property records are individual occupancy records that are linked together using the same Property ID From a Multi Occupancy Property record you can view all occupancy records linked to the property all contacts a
13. does not have security access to Calculated values and custom expressions and functions are not excluded regardless of the user s security If Respect View Security and Privacy in Queries and Queries and Reports is enabled via the Administrative Options form Reports Database section Rules and Security section protected information is masked in all queries and reports that do not include the record ID field regardless of the security level of the user Include the ID fields for the following list of tables to use this feature EMS Patient EMS_PTNT PTNT_ID Incident Arson Involvements INC_ASUB SUSP_ID Incident Civilian Casualties INC_CCAS CAS ID Incident Fire Service Casualties INC_FCAS CAS_ ID Incident Involvements INC_INVL INVL_ID Check Security Option for Attachments amp Signatures to require administrative access or specific user access to access For FH Enterprise systems only check Always store a copy of attachments on the server to store attachments added to records in the FH database Enabling this feature only effects attachments added after the feature is enabled Press OK To Disable Batch Updating of Contacts 000 Select the Administration menu Administrative Options option Click the Database tab Data Security tab By default when you modify a contact and other contacts in the record area exist you are prompted to batch update all contacts to match the currently displayed contact Check Dis
14. ems incidents ax Xe ee Occupancy ao al Inspections A x F Activity a x E Staff x xe e Training is al ead Training Program x oa Kool Inventory Ko ey Hydrant Lookup codes can be added to user defined fields throughout FH Invoicing and Accounts Receivable codes are also available with the optional FH Accounts Receivable module For more information on the invoicing and accounts receivable codes see the FH Accounts Receivable Installation and Introduction Guide More information about each lookup table is available on page 1 Setting Up Lookup Codes To Complete a Lookup Code Driven Field Data entry forms throughout FH include lookup driven fields Below is a description of a typical lookup driven field Anatomy of a Lookup Field Field for Status After a lookup code entering valid E if o S is entered the lookup code o mH lookup codes description is Press to display valid displayed lookup codes Lookups Entering lookup codes on data entry forms for example the Staff Member form is simple If you know the code you wish to add to the record you can type it directly into the field Press Tab to move to the next field and the description of the code is included If the code is not valid the field is marked as invalid and positioning the cursor over the field displays additional information If you know the description part of the description or keywords in the description type this i
15. incidents in the specified date range to export even though they have been previously exported You would want to do this if you had exported department information to the state previously but for some reason the export was not received by the state Check Include any records flagged for resubmission or deletion to include all of incidents tagged resubmit changed after being exported or delete deleted after being exported regardless of incident date Check Export narrative fields to include notes Check Export NFIRS EMS transactions to include optional NFIRS EMS incident data elements if completed from incidents in the selected date range Check Export special study transaction to include special study codes included with the incident records Note that if the special study codes do not match the states special study codes the state will not be able to use the data Check Export state user field transactions to include values from state user fields Check Export local user field transactions to include values from local user fields Press Next gt The NFIRS 5 0 Export Wizard form Output Files section is displayed Specify file output options When you select to output both an incident transaction export file and department information two files are created the incident transaction file and the department information file Incident Transaction File A copy of the incident transaction export file is placed i
16. such as a fleet of cars Type the Alarm Time that the alarm was received Use military time Required for all incidents Type the Incident Number or press Tab to allow FH to assign the next available number if auto numbering is enabled This number is used to identify a particular incident and to tie data from different modules together Enter the number assigned to the incident It may be necessary to obtain this number from an alarm or dispatch center Type or lookup the Station code This is a local option Provides a means of tracking incident data that has been collected and reported by individual stations Specific feedback on incident experience can then be prepared and sent to individual stations Station number is also useful for analyzing different levels of activity within a fire department Type or lookup the Occupancy ID for the occupancy record where the incident occurred When you select an existing occupancy address and building information from the occupancy record is added to the incident and can skip to the Incident Type field Address fields are disabled when an Occupancy ID is used unless specified otherwise in the Administrative Options form Incident section All Incidents section Select Address Type which may be a street address an intersection of two roadways or directions from a recognized landmark Incident address information is required to establish a legal report reference This information may also
17. 0 does not required it with these incident types Wildland Fire Reports are discussed in this chapter on page 160 NFIRS Incident Reporting To Add Fire Report 000 From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Additional Reports tab Press Fire The Fire Report form is displayed Enter the estimated total number of residential living units in Number of Residential Living Units whether or not all units became involved or were occupied at the time of the fire Check Not Residential if the fire did not occur in residential property Enter the total Number of Buildings Involved in the fire This total should include all building exposures Check No Buildings Involved If there were no buildings involved Enter the number of Acres Burned in this fire if at least one acre burned Otherwise check None or Less than One Acre If Property Use is in the 500s 600s 700s or 800s on site materials Oo O 800 or product fields are required Check None in the On Site Materials or Products area to indicate that no significant amounts of commercial industrial agricultural or energy products or materials were stored on this property If any of these products or material
18. Adding Dispatch or Remote Station Report Adding Dispatch Reports 212 212 To Add Basic Dispatch Remote Incident Report 212 Adding Remote Incident Report 213 To Add Remote Incident Report 213 To Merge Remote Responses to Central Database 214 Hydrant Management Section Adding Hydrant Records 216 To Add New Hydrant Record 216 Add Hydrant Contacts 216 Add Hydrant Service Activity 217 Add Hydrant Flow Tests 217 Operations Section Attach a File 220 Exporting Transaction Files to State 221 Contents 5 Contents About NFIRS Transaction Files 221 To Export NFIRS Transaction File s 221 About EMS Transaction Files 223 To Export EMS Transaction File s 224 Using the Department Journal 226 About Event Display 226 To Browse Month and Year 226 To View a Selected Date 226 To Set Filtering 227 To Set Shift Times 227 To Specify Event Types to Display 227 To Display Events Added After Department Journal Display 228 Opening and Editing Events from the Journal 228 To Open Event from Journal 228 To Add New Records from Journal 228 Send a Message 230 Sending and Receiving Messages 230 To Send a Message 230 Printed Reports and Queries 231 To Run a Report 231 To Run a Query 232 Set Spell Check Options 234 About Basic Spell Check Settings 234 To Set SpellCheck Options 234 To Link to Additional Dictionary Files 234 About Replacement Text 234 To Specify Replacement Text 235 Contents 6 Chapter About This Guide The User Guide l
19. Associated with Occupancy You can review all inventory associated with an occupancy and add inventory records To Review Add Inventory Associated with Occupancy From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Additional Records tab Press Equipment If inventory is associated with the occupancy inventory is listed Press New to add a new inventory record linked to the occupancy Save and close when finished o Press Add Link to add inventory record s You can select multiple inventory Press OK to link highlighted inventory to occupancy Occupancy Management o Highlight an inventory item and press Remove Link to remove the association with the occupancy the inventory record is not deleted Ifno inventory is associated with the occupancy the inventory browse listing is displayed o Press Cancel then New to add a new inventory record linked to the occupancy Save and close when finished o Select inventory item s then press OK to link highlighted inventory item s to the occupancy Multi select is enabled Press Close About Preplan Information amp Alerts Other preplans can include a variety of important preplan information An area for unlimited no
20. Close You can select other queries to run or press Close if finished Printed Reports and Queries 233 234 Set Spell Check Options You can customize spell check functionality to tailor the spell check to your department s needs About Basic Spell Check Settings Spell Check settings provide control over default behavior for spell check Dictionary files are installed with FH including a dictionary of 100 000 general terms and 30 000 medical terms If necessary you can link to additional dictionary files To Set SpellCheck Options From the Administration menu select Administrative Options The Administrative Options form is displayed Click the General tab Press Options in the Spell Checking area The SpellCheck Options form Settings section is displayed Check individual settings to enable the specific setting Save and close when finished 00O O80 O 4 o Link to Additional Dictionary Files From the Administration menu select Administrative Options The Administrative Options form is displayed Click the General tab Press Options in the Spell Checking area The SpellCheck Options form is displayed Click the Main Dictionary Files tab Press Add locate and highlight the additional dictionary file then press Open Check Include Microsoft Office shared dictionaries to link to custom Office dictionary files Save and close when finished Oo O OO OO 6 About Replacement Text Spell Check can b
21. Code is used Multiple Activities Fo i hes One Individual This allows you to track different types of activities at the scene for a single staff member Type or look up the Activity Code for the activity The description is automatically filled in with the description associated with the activity code Type or look up the Station Shift and Unit codes for staff member s to be added to the activity If most staff share a particular station shift or unit use these fields These fields can be left empty The values you add to the Hours Worked fields are added to each staff member record added The values you add to the Credits Points fields in this section are added to each staff member record added Complete Payroll Calculation information The Hours Paid values you add to the fields in this section are added to each staff member record added Type or look up a Pay Scale code to apply to each staff member added to the activity When a pay scale code is included the dollar amount associated with the pay scale code will be credited to the staff member and hours paid times the staff member s default hourly rate will be ignored Additional pay options are available NFIRS Incident Reporting o Check Credit Both Hours Paid and Pay Scale to calculate pay by multiplying hours paid by the staff member s default hourly rate plus the amount associated with the pay scale code o Check Use Pay Scale as the Hourly R
22. Complete remaining sections as needed then save and close About EMS Search amp Rescue Reports You can add EMS incidents from a NFIRS Incident Report When information shared between NFIRS and EMS is available it is automatically inserted into the EMS record so we recommend completing the NFIRS incident before creating an EMS incident To Add EMS Search amp Rescue Report From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click Additional Reports tab Press EMS Search amp Rescue We have added to the optional NFIRS 5 0 elements and created a module that can be used as an independent EMS reporting package or to track the optional NFIRS EMS data For more details on adding EMS incident reports is included starting page 197 About HazMat Reports A Hazmat Report is required for certain incident types To Add HazMat Report From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK NFIRS Incident Reporting GHEH Ifthe Query form is displayed highlight an incident then press OK Click Additional Reports ta
23. EMS Patient From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Other tab Press Attachments amp Signatures Attach File to Record on page 220 for details 0000 0 To Manually Lock Patient Record From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option About EMS Incidents 205 206 Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Other tab Press Record Lock Status The lock status of the report is displayed Click Manual Lock to lock the report User name is entered and only the user or an administrator can modify the incident To Display EMS Patient Completion Status From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse o
24. Find Highlight the report then press Run The Output Report To form is displayed Select an output format Select Screen if you want to preview the report before printing Select Default Printer to use the printer set up as the workstation default If you need to change default printer settings press Printer Setup at the bottom of the form and select the printer to use as the default printer for all Windows applications Select Select Printer to specify a printer to direct the report to a printer other than the default without changing the default printer Select HTML Graphical to output the report in HTML format HTML files can be viewed and printed by many software programs all internet browsers and many text editing programs Select PDF to output the report in a PDF format PDF files can be viewed and printed by Adobe Reader free software available from Adobe Select Other File Type and select from external data formats like Excel compatible spreadsheet only available when output results in formatted tables Press OK Printed Reports and Queries 231 232 Ifthe report does not include any filters the report is output as specified Ifthe report includes user specified filters the Query Parameters form is displayed o For each listed parameter you can specify criteria for example equal to less than etc and enter a value Leaving a parameter without a speci
25. Fire Reports The Wildland Fire Report is an optional alternative form that may be used for any of the following Incident Types e 140 Vegetation fire other e 141 Forrest woods or wildland fire NFIRS Incident Reporting e 142 Brush or brush and grass mixture fire e 143 Grass fire e 160 Special outside fire other e 170 Cultivated vegetation crop fire other e 171 Cultivated grain crop fire e 172 Cultivated orchard or vineyard fire e 173 Cultivated trees or nursery stock fire e 561 Unauthorized burning e 631 Controlled burning authorized e 632 Prescribed burning authorized To Add Wildland Fire Report O From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Additional Reports tab Press Wildland Fire The Wildland Fire Report form Scene section is displayed If you complete the Wildland Fire Report do not complete the regular Fire Report NFIRS 2 Specify latitude longitude or section township range meridian Use one of these if you checked Wildland Address on the Basic section of the main incident form If you put an address on the Basic section entry in this section is optional Type or look up the Area Type code to indicate the type of area at the origi
26. Groups Using Census Tracts as an Specifying Administrative Options 40 Example 20 Specifying Licensing Administrative Options 40 About Distinct Values Lookups 23 To Specify Department Information 40 To Lock Distinct Values Lookup Category 24 oe Add station S f a0 To Add Distinct Values Lookups Category Specifying General Administrative Options 41 Locked 24 To Specify Date and Phone Number Formatting To Merge Distinct Values Lookups 24 Options Al To Share Distinct Values Lookups Across To Specify Network amp Multi User Options 41 Categories 25 To Define Fiscal Year 42 To Specify Spell Checking Options 42 Contents Contents To Specify Security Options 42 To Specify Password Complexity Rules 43 Specifying Database Administrative Options 43 To Specify Database Audit Tracking Options 43 To Specify Key Values Administrative Options 44 To Specify Backup and Log Options 44 To Specify System Wide Requirements and Station Default 45 To Specify Administrative Data Security 45 To Disable Batch Updating of Contacts 46 To Enable Append Only Notes and Narratives 46 To Define Field Captions 47 Specifying Incident Administrative Options 47 To Specify General Incident Requirements 47 To Specify General Incident Resource Units amp Personnel Requirements 48 To Specify General Incident Authorization and Locking Requirements 49 To Specify All Incident Restrictions amp Ownership Requirements 50 To Specify NFIRS Administrative Opti
27. If inside complete the Story Where Injury Occurred for the story the injury occurred on If the story is below grade check Below Grade Type or look up a Specific Location code that best describes the specific location at time of injury Type or look up a Vehicle Type code that best describes the vehicle type the firefighter was in at the time of injury Type or look up Protective Equipment Contributed to Injury code indicating if protective equipment contributed to the injury If Yes is indicated click the Equipt Failure tab and complete the Equipt Failure section Press Add to add equipment involved in injury The Fire Service Casualty Equipment Failure form is displayed Type or look up the Protective Equipment Item code for the type of protective equipment involved Type or look up the Protective Equipment Problem code that best describes the protective equipment problem Adding NFIRS 5 0 Incident Reports 157 158 Type or look up the Manufacturer that made the piece of equipment Type or look up the manufacturer s Model name If one does not exist use the common physical description that is used to describe the equipment Enter the manufacturer s Serial Number that is generally stamped on an identification plate on the equipment Complete a detail record for each item that was a factor in the injury Press New to add an additional record Save and close when finished
28. Occupancy form is displayed press Browse or Ctrl O select the record to merge to then press OK Ifthe Query form is displayed select the record to merge to then press OK From the Form menu select Merge Occupancy Master Records The Query form is displayed Select the record containing information to merge then press OK The Merge Occupancy form is displayed Occupancy 1 is the original occupancy opened and Occupancy 2 is the occupancy selected from the Form menu Merge Occupancy Master Records option By default all information from Occupancy 2 is added to Occupancy 1 unless you select Merge to this occupancy in the Occupancy 2 area Select the child records to merge Press OK Carefully review the information in the prompt then press Yes to merge Press Close when finished To Review Merge Activity From the File menu select the Occupancy Management option Occupancies and Preplans option NOTICE Occupancy records that are merged to another occupancy record are marked as Hidden so the Query form Show Hidden checkbox needs to be checked to include these records Merged Records Ifthe Occupancy form is displayed press Browse or Ctrl O select the record to review merge activity for then press OK 112 Occupancy Management Ifthe Query form is displayed select the record to review merge activity for then press OK Click the Additional Records section tab t
29. Patient Victims tab Highlight a patient and press Open Click the Response tab Complete Times area fields The incident record s Alarm Date is associated with each completed time field by default press the time field s lookup button to change the date Type the Unit Notified time for this apparatus Type the Unit Enroute time To indicate that the unit was cancelled check Cancelled and type the cancelled time Type the Arrived Scene time of arrival Type the Arrived Pt Vict time personnel arrived at the patient or victim Type the Transfer of Care time when patient responsibility has been changed to another service agency Type the Enroute to Dest time the unit left scene for the destination e g hospital Type the Arrived Dest time the unit arrived at their destination e g hospital Type the Cleared time that this unit cleared the scene Type the Back In Svc time the unit was back in service Type the Back at Home time when the unit has returned to its service agency Press Response Time Analysis to display a summary of calculated response times for this incident based on entries in the Times areas Complete additional information as needed Save and close EMS patient record To Complete Patient Scene Information From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue
30. Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK EMS Search amp Rescue Incident Reporting 0000 Click the Patient Victims tab Highlight a patient and press Open Click the Scene tab Complete Patient Victim area fields The steps to add Vehicle Incident and Search amp Rescue Other Detail reports are detailed separately below Reports Select appropriate Patient Past Medical History and Alerts area option If Yes press Details and add the relevant details Select appropriate Aid Given to Patient Victim Prior to Arrival HEH area option If Yes press Details and add code s indicating the type of aid provided to patient victim prior to unit s arrival Select appropriate Scene Factors Affecting Response EMS Care area option If Yes press Details and add code s indicating scene factors patient victim prior to unit s arrival Select appropriate Human Factors Affecting Response EMS Care area option If Yes press Details and add code s describing the human factors that contributed to the patient s injury Select appropriate Patient Safety Equipment Worn or Deployed area option If Yes press Details and add code s describing safety equipment worn or used by the patient victim Type or look up the Initial Observed Condition Select whether the patient has an injury or illness
31. Specify Security Options on page 42 for the steps to require a password and to specify password complexity requirements Press Link to Staff ID to associate the login with a specific staff member When a Staff ID is associated with a login you can add staff name to reports and queries that include user records Type or look up an FDID associated with the user Check Change other non admin passwords Add additional rights just like any other non administrative user See To Add Non Administrative User below for the steps To Add Non Administrative User Select the Administration menu Users and Security option The Users and Security form is displayed Press New The User Setup form is displayed with the cursor in the User Name field Type the user name then press Enter If passwords are required via the Administrative Options form General section press Set Password type the password for the user in the Password field then type the password again in Confirm Password then press OK Certain password complexity requirements may also be specified in the Administrative Options form Specifying User Security 64 See To Specify Security Options on page 42 for the steps to require a password and to specify password complexity requirements Press Link to Staff ID to associate the login with a specific staff member When a Staff ID is associated with a login you can add staff name to report
32. Storage Tank List form is displayed Press Add Complete storage tank details Save and close storage tank detail when finished Add additional tanks if necessary or press Close if finished About On Site Materials Products Details about onsite materials or products is a valuable tool for preplans To Add Onsite Materials or Products From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Adding Occupancy Records 121 122 Ifthe Query form is displayed select the record from the list then press OK Click the Additional Records tab Press Onsite Materials Products Press and add onsite material product detail Repeat for each detail Press Save when finished About the Needed Fire Flow Calculation Needed fire flow is an estimate of the amount of water that should be available for a specific occupancy The required fire flow GPM figure is calculated based on a formula developed by ISO Guide for Determination of Needed Fire Flow Edition 10 2001 2001 ISO PROPERTIES INC 2001 Additional information about needed fire flow and the role of needed fire flow in ISO s Public Protection Classification PPC Program are available at http www isomitigation com To Calculate Needed Fire Flow From the File menu select the Occupancy Management o
33. The Hydrant Activity form is displayed Select Scheduled or Completed then type the start date and time and end date and time Type or look up the Staff ID of the member completing the service activity in the Inspector field oO 0O00 Complete a staff activity for the hydrant activity repair To Track Staff record from the Hydrant Activity form Other section if Time you want to track staff time for the activity and associate the activity with staff records Click the Activity Repair tab Select the activities performed for the inspection repair activity If a repair was made add a defect to the defects area by pressing add one or add multiple and check Repaired for repaired defects Complete additional hydrant activity information as needed Save and close hydrant activity when finished Save and close 00 000 Add Hydrant Flow Tests From the File menu select the Hydrant Management option Hydrant Master Records option Ifthe Hydrant form is displayed press Browse or Ctrl O to display a list of records select record then press OK Ifthe Query form is displayed select a record then press OK Click the Flow Tests tab Press Add The Hydrant Activity form is displayed Select Scheduled or Completed then type the start date and time and end date and time Type or look up the Staff ID of the member completing the inspection in the Inspector field O 0O00 Complete a staff activity for the hydr
34. Unit Actions Taken to add codes for additional actions taken Press Save to close Click the Personnel tab You can add staff one at a time by pressing Add and the Add One Staff Participant Detail form is displayed Member Adding NFIRS 5 0 Incident Reports 143 Press Add Group o If you want to select the staff using the staff group select method select Staff Group Select The Staff Group Select form is displayed Select staff members responding to the incident then press OK o If you want to add staff added to the unit from the optional staff scheduling select Add From Scheduling In certain circumstances a unit will respond that has no FH Staff staff assigned to it in FH Staff Scheduling the staff are Scheduling Tip assigned to another unit and respond on the other unit in certain circumstances For example if all staff are assigned to unit A but unit B responds in limited circumstances and unit B responds adding the unit via Add from Scheduling will result in no personnel In this instance the person entering the incident can add the unit from scheduling then from the Personnel section add personnel using the Add from Roster method and selecting unit A personnel that responded on unit B o If you want to add staff added to the unit from the station roster select Add From Roster The Staff Activity Group Add form is displaye
35. added but changes to the main activity are not applied to existing participant records Staff members added after main activity default information is changed has the new information applied Individual staff member activity records can be modified one at a time or changes can be applied to all activity participants in one step To Add a New Staff Activity Record From the File menu select the Staff Activities option Ifthe Staff Activity form with the last modified record is opened press New or Ctrl N to add anew record Ifa blank Staff Activity form is opened you are ready to enter a new staff member Ifthe default query for selecting staff records is displayed press Cancel to add a new record Modify today s Start Date if necessary Type or look up the Default Activity Code for the activity The values you select will be added to each participant s activity record You can modify individual participant detail records or change this value after adding participants Change End Date if different than Start Date Activity Description defaults to the description associated with the Activity Code You can modify Activity Description if necessary O O O Understanding Staff Activity Records 87 Lookup Incident Related Activity FDID Alarm Date Incident Number to associate this activity with an incident Generally incident related activities are added from the NFIRS incident or EMS incident report
36. amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Additional Reports tab Press Equipment Used to add equipment usage records for equipment used for this EMS Search amp Rescue incident Adding equipment usage records for an EMS Search amp Rescue report is the same for Incident Reports See page 160 for equipment usage details Save and close About the EMS Incident Narrative General information about the EMS incident can be added for an incident We strongly recommend against adding specific patient information to the main EMS incident narrative Complete EMS Incident Report Narrative Section From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Incident Narrative tab Type notes for the EMS incident Press F7 to spell check the narrative There is also a narrative for each patient To prevent breaching the security of patient data we recommend that you do not include patient information in the Incident Narr
37. be added to a staff activity more Add Individual than one time as long as a different Activity Code is used Staff This allows you to track different types of activities for a single staff member Type or look up the Staff ID Type or look up the Activity Code for the activity The description is automatically filled in with the description associated with the activity code Type or look up the Station Shift and Unit codes for staff member s to be added to the activity If most staff share a particular station shift or unit use these fields These fields can be left empty The values you add to the Hours Worked fields are added to each staff member record added The values you add to the Credits Points fields in this section are added to each staff member record added Complete Payroll Calculation information The Hours Paid values you add to the fields in this section are added to each staff member record added Type or look up a Pay Scale code to apply to each staff member added to the activity When a pay scale code is included the dollar amount associated with the pay scale code will be credited to the staff member and hours paid times the staff member s default hourly rate will be ignored Additional pay options are available o Check Credit Both Hours Paid and Pay Scale to calculate pay by multiplying hours paid by the staff member s default hourly rate plus the amount associated with the pay scale
38. be useful for identifying local problems such as checking for multiple incidents at the same location If the incident is a Wildland fire Rural Directions should be selected and you can check Address on Wildland Report to use the address entered on the Wildland Report Ifyou select Street Address o Type the Number of the specific location where the incident occurred This number is part of the address information where the incident occurred For structures and lots enter the street number For highways railroads etc enter the mile post number For block addresses enter the block number o Type or lookup the Prefix Street Highway Type Suffix values for the incident o Type the Apt Room Suite number where the incident occurred any combination of numbers and letters This number is part of the address information when the incident occurs within an apartment suite identifiable room or area generally rented or leased Leave blank if not applicable Adding NFIRS 5 0 Incident Reports 137 138 NOTICE Use Intersection ONLY if the location cannot otherwise be identified Use Sparingly If you select Intersection o Type or lookup the Prefix Street Highway Type Suffix values for the incident NOTICE Use Rural ONLY if the location cannot otherwise be identified Use Sparingly If you select Rural Directions o Type Directions to the incident location If yo
39. been performed Scheduled maintenance adds a scheduled maintenance record to the Maintenance area of the Maintenance Test section if you specify number of days for interval and check Auto Create Future Maintenance Records for this Job Auto Create is available any time a value is entered in the Number of Days field but we recommend that you do not automatically schedule critical maintenance items using this feature Instead add critical maintenance records from the Maintenance area To Add Maintenance Test Records From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option Ifthe Inventory form is displayed press Browse or Ctrl O select record and press OK Ifthe Query form is displayed select record and press OK Click the Maintenance Test tab Press Add The Maintenance Test Detail form is displayed If you are testing or maintaining multiple pieces of Batch equipment at the same time use Batch Maintenance Maintenance from the File menu select Apparatus Equipment and Inventory then Batch Maintenance Test Entry You can add similar testing or maintenance records to all relevant apparatus records See the FH Help File Batch Maintenance topic for details Type the Work Order assigned for the maintenance testing Apparatus Equipment and Inventory Type or lookup the Job code used to categorize the maintenance o
40. being renewed you can select the permit at the bottom of the form to modify details for the highlighted permit Press Close Renew an Expired Permit Outside Occupancy From the File menu select the Occupancy Management option Batch Renew Permits option A list of permits that expired in the Expiring between date range is displayed Modify the Expiring between start and end date and specify a Oooo Permit Type to limit the included expired permits Check Don t show permit tf the occupancy has a newer permit of the same type to remove expired permits from the list when a permit of the same type is issued for the occupancy Click on the permit to renew Press Renew The Renew Permit s form is displayed Select permit number Select Auto generate the new permit number to allow FH to assign a new number Select Use a specific permit number and assign a permit number if necessary Check Use the default permit fee and calculate expiration date based on length specified in the lookup table to use the default values for fee and permit length added to the lookup code Check Carry the notes from the current permit forward to the new e To permit if desired Change the Staff ID of the permit issuer and Issue Date if necessary Select the permit types to renew When a permit type is selected all expired permits for that Permit Type for the occupancy are renewed Press Renew The new permit is
41. can be inserted into the field Lookup fields are instrumental for categorizing records so specific records can be included in reports Lookup fields list valid values so instead of typing the information into the field the value is selected Administrators have additional control over entered information by limiting the ability of users to add edit or delete lookups There are two types of fields that can be populated with values user defined lookup codes and distinct values lookup fields Lookup code fields include a code and description and only codes added for the category can be added to the field Distinct values lookup fields access a list of distinct values entered into that field in other records Any value can be typed into a distinct value lookup unless the category is locked and the distinct value is available for use in new records as soon as the current record is saved About Lookup Codes Lookup codes are stored in lookup tables Each specific lookup table is divided into lookup code categories The lookup category or lookup contains the valid values for a specific field For example Staff Status is a lookup category of the Staff Activity and Training Codes lookup table and contain valid values to be used in the Status field on the Staff Member form siai Coberman Andrew L First Suffix Staff ID l O Basic Contacts Activities Trairing Additional Records Notes Other Resid
42. error reports submitted to FH technical support Press OK To Add Station Select the Administration menu Administrative Options option Press Add The Code for Stations form is displayed Add details about the station Be sure to designate individual stations with separate FDIDs as central stations if you will be submitting department information and incidents to the state for that FDID The information you add is also added to the station lookup code or you can select the station if it has already been added to the lookup Press Save to close the Code for Stations form Press OK Administrative Options Specifying General Administrative Options General administrative options control how dates and phone numbers are formatted whether individual user preferences and macros are allowed when your fiscal year begins whether spell check is automatically run general security options and password complexity rules To Specify Date and Phone Number Formatting Options Select the Administration menu Administrative Options option Click the General tab Specify Formatting area options Check Use Windows Control Panel date format to use the date format specified in Windows Control Panel Check Show Century to include the century for example 1999 instead of 99 This information is included in the underlying database regardless but will not be displayed in data entry forms unless checked Sp
43. failed to operate effectively Save and close when finished About Fire Casualty Reports A Civilian Casualty Report is required for each civilian casualty indicated A Fire Service Casualty report is required for each fire service casualty indicated To Add Civilian Fire Casualty Report From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click Additional Reports tab Press Civilian Fire Casualty If a listing of civilian fire casualty reports is displayed press Add The Civilian Fire Casualty Report form is displayed Press Add from Occupancy to add an occupancy or owner if available from the Occupancy record or press Add from Involvement to add information from an involvement If the casualty is not available from these sources complete the fields below Type the Last Name of the injured person and any additional known name fields Enter either the age in Years and Months or the Date of Birth Record the age in months only for infants under one year Type or look up Gender Required Type or look up the Race code If the race is not known press F5 Type or look up Ethnicity code If the ethnicity cannot be determined or is not listed leave this element blank
44. if there is no loss in this area In mutual aid situations each department reports its own fire service casualties Only the receiving department reports other casualties Check No Casualties to indicate that there were no fatalities or injuries to either fire fighters or other persons If casualties are reported NFIRS Incident Reporting o O O O Enter the number of Fire Service Casualties Deaths from your department who died in connection with this incident Enter the number of Fire Service Casualties Injuries your department who were only injured in connection with this incident Enter the Civilian Casualties Deaths of persons who died in connection with this incident other than fire service personnel Enter the Civilian Casualties Injuries of people who were only injured in connection with this incident other than fire service personnel Type or look up a Detector Alerted Occupants code to indicate if a detector alerted occupants in this incident regardless of detector type including smoke carbon monoxide etc Required for all confined fires Incident Type 113 118 Blank means that the incident type was one for which detector operation would not apply About Incident Property Information Incident property information includes hazardous materials release mixed property use and weather information When an Occupancy ID is used the mixed property use value from the occupancy is used To Ad
45. in an information retrieval system without the written permission of the copyright owner Contacting FIREHOUSE Software Sales International Phone 800 921 5300 ext Fax 515 2884825 fhsales acs inc com AZ CA NV OR WA CT MA ME NH NY RI VT Ontario im Brandariz Peter Eleftherakis Phone 800 796 1614 530 621 0981 Phone 888 362 4446 508 362 4446 Fax 530 626 8582 AK AL CO FL GA HI IA ID Fax 508 362 5932 jim brandariz acs inc com IL MI MN MT NC ND NE peter eleftherakis acs inc com NM SC SD TN UT WI WY Roger Dedoncker Jason Trotter ustin Powell AR KS LA MO MS OK TX Sioned ene 921 5300 ext DE IN KY MD NJ OH PA VA WV Mike Rogers Fax 515 288 4825 Forrest Nace Phone 888 941 3473 214 504 0242 fhsales acs inc com Phone 800 285 8685 724 285 3090 Fax 214 504 0244 Fax 724 283 9086 mike rogers acs inc com forrest nace acs inc com Technical Support Phone 800 921 5300 ext 2 support firehousesoftware com Contents About This Guide Section Workstation Options Section Using This Guide 2 Specifying Workstation Options 28 Getting More Information 3 About Workstation Station Codes 28 To Assign a Workstation Specific Station Code Lookups Section 28 About Lookup Codes 6 About Startup and Navigation Options 28 Available Lookup Code Tables 7 To Specify Startup Options 28 To Complete a Lookup Code Driven Field 8 To Specify Field Navigation Options 29 To Install Preset Lookup Codes
46. in the Injury or Illness field Save and close To Add Vehicle Accident Information 0000 From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Scene tab Press Vehicle Accident Extrication to add vehicle accident extrication details The Vehicle Accident Extrication form is displayed Complete fields as needed Save then close to return to the Patient Victim Information form Save and close About EMS Incidents 197 198 Add Search amp Rescue Report From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Scene tab Press Search amp Rescue The Search amp Rescue form is displayed Add Trench or Confined Space Rescue area information or check Not Applicable Add Low or High Angle Rescu
47. information in the export Note that the transaction file is not encrypted Check Export patient billing information to include EMS billing fields in the export Check Export EMS special study transactions to include special study codes included with the incident records Note that if the special study codes do not match the states special study codes the state will not be able to use the data Check Export state user field transactions to include values from state user fields Check Export local user field transactions to include values from local user fields Press Next gt The EMS Export Wizard form Output Files section is displayed Specify file output options When you select to output both an incident transaction export file and department information two files are created the incident transaction file and the department information file Incident Transaction File A copy of the incident transaction export file is placed in a subfolder in the program directory default is C Program Files FIREHOUSE Software named EMS You are given additional options for creating additional copies of the file later in the export process Operations e Department Information File A copy of the department information export file is placed in a subfolder in the program directory default is C Program Files FIREHOUSE Software named EMS You are given additional options for creating additional copies of the file later in the export p
48. mailed check Mailed and leave date blank You must batch print HIPAA notices and the date will be filled in Press OK Ifthe notice was sent via some other method check Other and note the method Press OK Save and close patient record EMS Search amp Rescue Incident Reporting To Add a Patient Narrative From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Patient Narrative tab Add patient narrative Save and close patient record To Complete Patient User Fields From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Other tab Press User Fields Complete applicable fields The steps to add user defined fields are detailed in the Advance Feature Reference To Attach Files and Signatures to
49. member When equipment records include the staff member s ID the equipment is listed here To Add Staff Equipment to Staff Record From the File menu select the Staff Members option Ifthe Staff form is displayed press Browse or Ctrl O highlight a record then press OK Ifthe Query form is displayed highlight a record then press OK Click the Additional Records tab Press Equipment If inventory records have been entered with the staff member s Staff ID these records are listed in the Staff Member Equipment Inventory form Press New to add a new inventory record Complete inventory record then save and close Staff Activity amp Training o Press Add Link to associate existing inventory records with the staff member select inventory records then press OK Press Delete to remove the association between a staff member and inventory record highlight the record Ifno inventory records have been entered for the staff member a blank Inventory form is displayed Complete inventory record o Save and close Inventory form Press Close About Staff Availability Records Availability records are used in participation reports to indicate the percentage of calls or training a specific number responds to and the percentage of calls or training records a member responds to based on the member s availability status For a given date time station unit staff member FIREHOUSE Software scan
50. option Batch Schedule Inspections option The Batch Schedule Inspections form is displayed Change the Select the method to Select Using Occupancy Query Select an occupancy or occupancies then press OK Press Next gt gt Specify the start date for when the last inspection was performed at the occupancies that you will be creating inspections for Specify default values for the inspections that are created Press Next gt gt To change values for specific fields included in a selected inspection highlight inspection s and press Update Field select the element to change type or lookup the value then press OK Press Next gt gt Select remaining options Check Automatically transfer any outstanding violations to include outstanding violations in the inspections created Check Transfer default occupancy contact as inspection responsibility party to use the primary occupancy contact as the inspection responsible party value Occupancy Management Check Remove existing future scheduled inspections of the selected type for each occupancy to remove other inspections of the same type Use this feature to keep inspections accurate when the inspection schedule changes Press Finish Inspections are created as defined Answer Yes to prompt if you are creating additional inspections or No to finish To Add Edit Violations From the File menu select the Occupancy Management option Occupancies and
51. or editing responding units records to incident reports Press OK To Specify All Incident Restrictions amp Ownership Requirements Select the Administration menu Administrative Options option Click the Incident tab All Incidents tab Restrictions amp Ownership tab Check Restrict view access to other user incident involvements to add additional security to involvement records When enabled an additional security option for non administrative users is added to allow the user to view involvement records added by different users Check Restrict view access to other users casualty reports to add additional security to civilian and fire service casualty records When enabled additional security options for non administrative users are added to allow the user to view civilian and or fire service casualty records added by different users Check Automatically prompt to take ownership of unassigned records when record is selected for edit to prompt the user accessing an incident created from external data for example an incident created from CAD data to take ownership of the unassigned records Press OK To Specify NFIRS Administrative Options Select the Administration menu Administrative Options option Administrative Options O Click the Incident tab NFIRS tab Check Require a NFIRS report for all incidents to require a NFIRS incident for EMS incidents Enabling this option ensure
52. prior responses during the preceding 24 hours prior to the time of injury Do not count the incident at which the injury occurred Type or look up the Usual Assignment code Type or look up a Physical Condition Just Prior To Injury code to indicate physical condition just prior to the injury Required Blank means other or undetermined Type or look up a Severity code to indicate the severity of the injury Type or look up a Taken To code that best describes where the fire service casualty was taken regardless of who transported the firefighter or whether the firefighter was transported Type or look up the Activity At Time of Injury code Click the Injury tab Type or look up the Primary Apparent Symptom code of the casualty s most serious apparent injury Type or look up the Primary Area of Body Injured code for the part of the body that was most seriously injured It should be the part of the body affected by the Primary Apparent Symptom Type or look up the Cause of Firefighter Injury code for the immediate cause or condition responsible for the injury Type or look up the Factor Contributing to Injury code of the most significant factor contributing to the injury Type or look up the Object Involved in Injury code Check None if no object was involved Type or look up the Where Injury Occurred code Type or look up the Relationship to Structure code indicating whether the injury occurred inside or outside a structure
53. quality control To Add Report Authorizations From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Other tab Press Add in the Report Authorizations area The Report Authorization form is displayed Type or look up the Authorization Type code for the authorization type Adding NFIRS 5 0 Incident Reports 171 Type or look up the Staff ID code for the staff member The Assignment of the authorization member typically the unit code on which the staff member rode Defaults the value of the assignment field to the staff member s unit or from the staff member s activity record when Default the assignment is enabled from the Administrative Options form Incident section NOTICE When you are adding an OC type authorization check Add or update Member Making Report authorization with this same information to create an MM type authorization record with the same information Tip Press Save and New to add an additional report authorizations or press Save then Close Save and close incident 172 NFIRS Incident Reporting Completing Responding Units and Personnel Without Editing Main Incident There are certain situations where the base incident has been crea
54. recommended Use an application such as Microsoft Excel or Lotus 123 to manipulate and format the data if necessary prior to importing for example if the application where the information originates does not export to a FH required import format use the helper application to open and format then export to a supported format Once you have the data available for importing import using the Administration menu Database Administration option Import from External Data Source option To Import Lookup Codes Press New The Select Import Type form is displayed Select either Standard Database Import or Lookup Table Import Lookups Select Standard Database Import if the source data includes more than one category of lookup code for example streets AND counties Ifthe source data includes only one category select Lookup Table Import When Lookup Table is selected the Category field is required Press the lookup button and select the desired target lookup table The remaining procedure assumes that the source data includes only a single lookup category and that the source is either DBF or delimited ASCII Name the import specify source type and select source file See the Advanced Feature Reference Import External Data chapter for more specific information Press Add The External Data Import Field Properties form is displayed with the target table already selected Select the target field the
55. record code represents correspond to this additional information lookup tables Code Set Up security 6 Lookups Some lookup code driven fields are required to complete certain records You can make other lookup driven fields required from the Administration Options form Other codes are useful for categorizing records so they can be used in reports and displayed in browser lists You do not have to add every possible code before starting to use FH The important consideration is that the codes are well thought out and that you have added as many as you need You can add additional codes at any time When set up properly lookup codes ensure consistent data entry while reducing the number of keystrokes to enter information Codes also categorize records so reports identify types of records consistently and accurately Codes can be added to lookup tables on the fly as master records are added however we recommend that you set up your lookup codes before you start adding records Available Lookup Code Tables Lookup codes are stored in tables The chart below lists all lookup tables along with the area in FH where the lookup codes are used About Lookup Codes Incident Report Codes Occupancy Management Codes Staff Activity and Training Codes Equipment and Inventory Codes Hydrant Management Codes System Wide Codes User Defined Field Codes x xe ka Fire Incidents X
56. section NOTICE Staff ID should not be based on information that will change over time If there is a department assigned ID that changes over time for example a code based on rank use the Alternative ID field to track this department assigned ID Staff ID Type an Alternate ID This is a secondary ID that can contain additional identification information for the staff member Type the number of miles this staff member lives from their station in Miles to Station Complete address information as needed Group select forms used to select multiple staff members Group Select for example members that respond to incidents include Criteria criteria fields used to filter the list of available staff members to display all staff associated with specific criteria Station Shift and Unit are examples When Station Shift or Unit fields for the staff member record are left blank the staff member will still be included in the Group Select list even if a specific station shift or unit criteria is specified in the group select since the member could be assigned to Staff Activity amp Training the Station Unit or Shift lf values are entered in the staff member s Station Shift or Unit field and station shift or unit criteria is specified for the group the staff member is not included in the list unless station shift or unit criteria match the values in the staff member s record Type or look up the
57. service casualties Type Their Incident Number If you gave aid to another fire department enter the incident number assigned to the incident by that department Save and close mutual aid record The Aid Given or Received list is displayed Press Close to return to the NFIRS Incident Report form Save and close record To Add Multiple Responding Units HEH From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe default query for selecting NFIRS Incident Reports is displayed you are ready to select an incident then press OK Click Units amp Personnel tab Press Add Group Ifyou use station roster amp availability or the optional staff scheduling module select All units for lt station gt as entered in the station roster or via staff scheduling or select Unit code lookup and select the units to add then press OK The Unit Group Add form is displayed Ifyou do not use station roster amp availability or the optional staff scheduling module the Lookup Units form is displayed Select units to add then press OK The Unit Group Add form is displayed Complete Unit Group Add form Basic section values These values are applied to all responding unit detail records Type or look up the Response Code that best describes the nature of the
58. the FH Help File Validate File Locations topic for more information on using this utility Check Use transactions for data updates to enable transaction processing Transaction processing enables multiple system actions within FH to be treated as a single step simplifying certain recovery procedures should errors arise For example if you modify values for several fields for an incident report the update is treated as a single transaction If one of the values in the transaction fails to be saved none of the other transaction values are applied To optimize performance leave this option disabled Press OK Oo 000 0 To Enable Local Caching Select the Tools menu Workstation Options option Click the Local Data amp Files tab Check Enable local caching of system and lookup tables This option allows you to copy the most up to date lookup codes and system database from a central location and use them locally You will not be able to modify the lookup codes locally DO NOT set this path to the root directory where FH is installed It must be a sub directory location Example C Program Files FIREHOUSE Software Cache When Enable local caching is checked press Cache highlight the cache directory then press OK Press OK 000 Specifying Other Workstation Options Other workstation options control report and query behavior internet options automated tasks and journal and reminder options To Specify Repo
59. the list then press OK Click the Inspections amp Activities tab Existing inspections and non incident occupancy activities like plan reviews public education etc performed at the occupancy are listed Highlight inspection and press OK Click the Responsible Party tab Add information about the person usually the occupancy owner responsible for the inspection To use information from an occupancy contact record press Occupancy Contacts add parameter values then press Run Query Highlight record then press OK Complete remaining responsible party information as needed Save and close inspection record To Add Inspection Linked Permits From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Inspections amp Activities tab Existing inspections and non incident occupancy activities like plan reviews public education etc performed at the occupancy are listed Highlight inspection and press OPEN Click the Linked Permits tab Add a new permit or link the inspection to an existing permit To adda new permit Press New and complete permit details Optionally add additional permits linked to the current permit the Permit No
60. the training category is ina training category group added as an elective hours will be credited for the specific training requirement and the elective requirement To Add New Training Program From the File menu select Training Programs and Certifications option Training Programs option Ifthe Training Program form with the last modified record is opened press New or Ctrl N Staff Activity amp Training O O O 66 Ifa blank Training Program form is opened you are ready to add a new record Ifthe Query form is displayed press Cancel Type a training program Description Type or look up the Certification Program Code Press Enter or Tab on the keyboard Enter the Duration in Months for the period of time the certification is valid for if applicable Press Add The Training Program Requirement Detail form is displayed Select Requirement Type Select Training and Type or look up the training category code Select Activity and Type or look up the activity code Select Elective and Type or look up the training category code group Type the Hours Required or if the training activity elective is not added unless a specific skill is assumed for the attendee and is not based on hour check Skill Based Press New to add additional training or activity requirements or EEH press Save then Close Click the Staff Members tab To add a staff one at a time press Add The Staff Member Tr
61. their own rights Administrative access provides complete access to all areas of the system so no further security definitions are required Specify what form is automatically loaded when this user logs into the system in Auto Launch Form on Login or leave as lt None gt to display the FH desktop after login oo O O Users and Security Check Require Password Change Next Login to prompt user to supply their own password next time they log in The user name and password is ready to be used to access FH Save and close the User Setup form then add additional users or exit the Users and Security form To Add Administrator s Helper User An administrator s helper can access other user s login records to change the user s password Administrator helper access does not provide any other administrative access and additional module security must still be assigned Select the Administration menu Users and Security option The Users and Security form is displayed Press New The User Setup form is displayed with the cursor in the User Name field Type the user name then press Enter If passwords are required via the Administrative Options form General section press Set Password type the password for the user in the Password field then type the password again in Confirm Password then press OK Certain password complexity requirements may also be specified in the Administrative Options form See To
62. tool for preplans To Associate Nearby Hydrants with Occupancy From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Occupancy Management O Click the Additional Records tab Press Hydrant Locations When hydrants have already been added for the occupancy the Nearest Hydrant Locations form is displayed Press Add Type or look up the Hydrant No for the hydrant located near the occupancy record Hydrant details are displayed Optionally press Open Hydrant Record to make changes to the hydrant record then press Save Save and close Hydrant Location form Add additional hydrants if necessary or press Close if finished About Storage Tanks Details about storage tanks at the occupancy site can be a valuable tool for preplans To Add Storage Tank Details 000 From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Additional Records tab Press Storage Tanks When storage tank details have already been added the
63. unit and pressing Change values as needed Press Apply to All check the fields with values that should be applied to all units then press OK Save and close O O O Adding NFIRS 5 0 Incident Reports 145 146 To Add Staff Activities Staff added from responding units are listed here You can Non Response add additional staff if necessary To add activities for Related Activities incident related activities that are not specifically incident response activities should be added from the NFIRS Incident Report form Additional Reports section Staff Activities button Incident related activities that are nor incident response related are not displayed in the Units amp Personnel section From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe default query for selecting NFIRS Incident Reports is displayed you are ready to select an incident then press OK Click Units amp Personnel tab Press Add to add a single staff member to the activity The Participant Detail form is displayed You can also add multiple staff at one time using the Add Group button More information on adding groups is listed on page 88 NOTICE A single participant can be added to a staff activity more than one time as long as a different Activity
64. unit s response Adding NFIRS 5 0 Incident Reports 141 Check appropriate Fire Medical Rescue Other types to indicate the main use of this apparatus at the incident The main use at the incident need not be the consistent with the apparatus type For example EMS may be the principal use of the members arriving on scene in a ladder truck Required for all incidents Complete Response Times area fields Dates for each completed time field default to the Alarm Date value and can be modified by pressing the lookup button to the right of the time field Check Cancelled and type the time the unit was cancelled if relevant Press Unit Incident Actions Taken to add action taken codes Select codes then press OK Click the Personnel tab Select the Personnel for Unit Staff is added to the current unit only Press Add or Add Group to add personnel o If you use station roster amp availability or the optional staff scheduling module select All units for lt station gt as entered in the station roster or via staff scheduling or select Unit code lookup and select the units to add then press OK The Unit Group Add form is displayed o If you do not use station roster amp availability or the optional staff scheduling module the Lookup Units form is displayed Select units to add then press OK The Unit Group Add form is displayed Add personnel for each responding unit Optionally complete equipmen
65. verify the expected format for EMS transaction files before performing the steps below Exporting Transaction Files to State 223 224 To Export EMS Transaction File s From the File menu select the EMS Search amp Rescue Reporting option Export EMS Transaction File option The NFIRS 5 0 Export Wizard form is displayed Select Export Completed Incident Transactions and Department Information and press Next gt The EMS Export Wizard form Incident Report Selection section is displayed Specify the EMS Service for which you wish to export department information and incidents O Specify the incident date range to include in From Date and To Date Check appropriate additional options Check Export all records in this range as new transactions even if previously exported to force all department information and incidents in the specified date range to export even though they have been previously exported You would want to do this if you had exported department information to the state previously but for some reason the export was not received by the state Check Include any records flagged for resubmission or deletion to include all of incidents tagged resubmit changed after being exported or delete deleted after being exported regardless of incident date Check Export narrative fields to include notes fields Check Export patient confidential information to include confidential
66. 39 Administrative Options Form Sections 39 Alarm Types 12 Append Only Notes and Narratives 46 Arrival Date 37 Auto Create Future Maintenance 104 Auto generate EMS scene patient narrative 52 Auto Lock Reports 49 Automated Task Log 44 Automatically prompt to add history records when rank status or hire date changes 54 56 Auto Number New Records 44 B Basic Concepts 7 Batch Maintenance Test Records 102 Battalions 40 Browsing Records 75 CAD Add units to CAD incident 170 Assign incident ownership on edit 50 Index I Index Prevent non admin from adding units 50 Chemical Inventory 119 City State ZIP code 15 Custom Data Export Log 45 Custom field captions 47 D Database Audit Log 44 Department Journal 218 219 221 Adding Records 220 Change Month and Year 218 Displaying Events 218 Enable Day Mode 35 Limit Display 219 Opening Displayed Events 220 Specify Event Types to Display 219 Use Day Journal 35 Dispatch Notif Date 137 District 15 Divisions 40 EMS Assessments amp Treatments 52 Default auto time increment 52 Require a Medication record 52 Require a Procedure record 52 Require a Vitals Assessments record 52 EMS Code Set 53 Export Incident Report 215 217 Export to Station Log 45 Exporting EMS incident 215 External Data Import Log 45 F Hide Staff Members 84 Hydrant Locations 120 Hydrant Tracking Codes 14 Hydrant 1
67. 4 Hydrant Defect Codes 14 Import Data See Also Advanced Feature Reference Lookup Tables 18 Import from Station 45 Incident location type 135 Incident Number Format 48 Incident Reports Require Additional Reports 51 Require EMS report 51 Inventory Codes 14 Equipment Location Codes 14 Inventory Class Codes 14 Maint Test Job Codes 14 Usage Type Codes 14 Vendor Class Codes 14 Inventory occupancy association 99 Inventory types 101 Field Captions Customizing 47 Index 2 K Key Counters 44 L Login 62 Lookup Accessing Codes 16 Code Setup Decisions 8 Groups 19 Importing Into 18 Printing Codes 9 Tables 7 M Mutual Aid Departments 12 Mutual Aid Types 12 N Needed Fire Flow 121 NEMSIS reporting requirements 53 NFIRS 5 0 Incident Report 132 133 O Occupancy Inspection Codes Preplan Codes 13 Special Response Codes 12 15 Violation Codes 13 Open Multiple Records 75 Outstanding Violations 115 Overlapping Availability Record Example 8 P Password 62 Pay Information 83 Payroll Calculation 144 162 190 PDA Import Export 45 Personnel and Training Codes 13 Availability Type Codes 13 Driver s License Types 13 Instructor Codes 14 Pay Scales 13 Staff Activity Codes 13 Staff Activity Positions 13 Staff Member History 13 Training Categories 14 Index Property ID 110 Record Entry Order 73 Record Select
68. 9 About Data Entry Forms 29 To Print a List of Lookup Codes 9 To Specify Data Entry Form Options 29 Setting Up Lookup Codes lI About Tab amp Field Coloring 30 Minimum Recommended Codes to Add 12 To Specify Tab amp Field Coloring 30 Minimum Recommended Incident Report Codes About Desktop Options 31 12 f To Specify Desktop Options 31 oe Occupancy 13 Specifying Pilg Lovato Workstauon Options 32 Minimum Recommended Staff Activity and To Specify File Locations 32 Training Codes 13 To Enable Local Caching 33 Minimum Recommended Equipment and Specifying Other Workstation Options 33 Inventory Codes 14 To Specify Report and Queries Options 33 Minimum Recommended Hydrant Management To Specify Internet Options 34 Codes 14 To Specify Automated Task Options 35 Minimum Recommended System Wide Codes To Specify Journal amp Reminders Options 35 t9 About Internal Messaging 36 Adding Lookup Codes o To Specify Internal Messaging 36 To Add a Lookup Code 16 About To lb rs 36 To Edit a Lookup Code 17 T t oe 3 Transferring Codes Between Separate FH eee Installations 17 About Default Workstation Options 36 To Copy Lookup Codes to an Installable FH File To Reset Workstation Options Back to K 17 To Install Lookup Codes from an Installable FH Workstation Option Management 37 File 18 To Apply Workstation Options to Selected Importing Lookup Codes 18 Workstations 37 To Import Lookup Codes 18 Setting Up Code Groups 19 Administrative Options Section To Add
69. 90 Staff Activity amp Training Understanding Training Classes A training class is given to develop staff members skills Training classes are divided into categories which are set up in the training category codes in personnel and training codes When you set up the code you can add a default objective of the course When a training class is used with the code the objective is added to the training class Training classes can only use one category but one category can be used in multiple classes You can report on staff members training in specific categories and training classes can be credited toward any training programs also referred to as certifications the staff member is enrolled in Training programs can require a certain number of hours in a specific training category Training programs are detailed on page 94 Guidelines for Adding Training Classes We recommend documenting what was done in a training exercise not simply entering a brief description and time spent Non training activities like business meetings should be tracked via Staff Activity records All staff member training should be entered in FH whether the training is in house or at some other organization like the National Fire Academy Below are guidelines for entering useful training records e Add Training Categories lookup codes for specific types of training classes We recommend avoiding codes like Monthly Drill or other generic codes that do not
70. DID is associated with Station FDID is a unique identifier assigned by the state to identify a particular fire department within the state FDID may also identify the county fire district or other jurisdiction in which the fire department is located Many states use the two left most digits to identify the particular department within a jurisdiction FDID is five digits Type the month day and year of the incident in Alarm Date This date is when the alarm was received The Alarm Date in conjunction with the other required fields FDID Alarm Time Incident Number uniquely identifies each incident If incidents with the same Alarm Date exist you are prompted to select an incident or to add a new incident press New NOTICE If this is an exposure note the FDID Alarm Date Alarm Time and Incident Number values of the XX Incident Type Exposures the incident is an exposure to There must be a base XX Incident Type incident to add an exposure to Type the FDID Alarm Date Alarm Time and Incident Number of the base incident then press New Exposure when prompted A separate sequential exposure number is assigned to each exposure The original incident is always coded 000 136 NFIRS Incident Reporting while exposures are numbered sequentially beginning with 001 The relevant data for each exposure should then be recorded using the appropriate section Note Treat similar items in a group as a single exposure
71. EMS vehicles in EMS ALS BLS Personnel Enter the number of Rescue Crash vehicles that responded from your department in Rescue Crash Apparatus Enter the number of personnel that responded to this incident in rescue crash vehicles in Rescue Crash Personnel Enter the number of units not in the above categories that responded to this incident in Other Apparatus Chief officer vehicles and personnel from privately owned vehicles should be considered as Other Apparatus Adding NFIRS 5 0 Incident Reports 147 148 Personnel arriving in Other Apparatus should be classified according to their main use at the incident Enter the number of personnel not in the above categories that responded to this incident Classify your apparatus and personnel based upon their main USE at the incident An engine that responds to an EMS call should be classified as an EMS vehicle Check Counts include aid received resources if you receive aid and you choose to count the resources of all responding departments Complete Estimated Dollar Losses amp Value fields All that is required is an estimated dollar loss not an absolute accounting Insurance companies and property owners will get their own independent estimates of the loss as necessary These entries are intended for use by your department your state and the federal government to establish broad categories of dollar losses Property owners and managers can help wi
72. FDID the staff member is associated with Type or look up the EMS Service Type or look up the Station and Shift the staff member is assigned to Type or look up the Unit code the staff is assigned to if the staff member is assigned to a single unit Type or look up Rank and Effective Date Rank is not included in group select criteria Type or look up Status and Effective Date Status is typically used to distinguish between inactive volunteer part time and full time employees Type or look up Date of Birth Hire Date Adjusted Hire Date and if the staff member is no longer in service End Service Date Adjusted Hire Date can be used to reflect when a designation took effect Optionally add Other Stations to include the staff member when adding staff groups using the additional station values as criteria Add phone number and emails as needed Press H then enter the staff member s published Phone Numbers Type Phone Number and Extension Click the Email Internet Addresses tab then press and enter the staff member s email Address Add additional information as needed then save and close record Oo O O O66 About Staff Contacts Add individuals that can be contacted regarding each staff member for example a staff member emergency To Add Staff Contact to Staff Record From the File menu select the Staff Members option Ifthe Staff form is displayed press Browse or Ctrl O high
73. FIREHOUSE K Softwaree A C Ss FH User Guide expertise in action Ma A C S Ist 09 06 2nd 10 08 Copyright 1993 2008 Affiliated Computer Services Inc ACS All rights reserved 2900 100th St Suite 309 Urbandale lowa 50322 LifeART image 2005 Lippincott Williams amp Wilkins Medical Dictionary 1999 Wintertree Software Inc PDFRasterizer NET 2001 2005 TallComponents BV Mapping 1999 2005 ESRI Inc portions of this work 1998 2004 Leica Geosystems GIS Mapping LLC 1996 2003 Microsoft Corporation 1995 2003 LizardTech Inc MrSID is protected by the U S Patent No 5 710 835 Foreign Patents Pending based in part on the work of the independent JPEG Group Trademarks FIREHOUSE Software is a registered trademarks of ACS All rights reserved Microsoft MS MS DOS Microsoft Visual FoxPro and Microsoft Access are registered trademarks Windows is a trademark of Microsoft Corporation CAMEO is a registered trademark All other products or services mentioned in this manual are identified by the trademarks or service marks of their respective companies or organizations ACS disclaims any responsibilities for specifying which marks are owned by which companies or organizations Copy and Use ACS is protected by the copyright laws that pertain to computer software It is illegal to Restrictions make copies of the Software except for backups It is illegal to rent lease sublicense or otherwise transfer any o
74. From the File menu select the Staff Members option Ifthe Staff form is displayed press Browse or Ctrl O highlight a record then press OK Ifthe Query form is displayed highlight a record then press OK Click the Other tab Press User Fields Complete fields then save and close To Attach File to Staff Record From the File menu select the Staff Members option Ifthe Staff form is displayed press Browse or Ctrl O highlight a record then press OK Ifthe Query form is displayed highlight a record then press OK Click the Other tab Press Attachments Press F1 for details on using this form Save and close attachment Save and close staff record when finished Staff Records 85 86 About Staff Locking and Modification History Staff records can be locked from modification by non administrative users A complete history of modifications can be viewed for the record To Change Record Lock Status Ooo O OO From the File menu select the Staff Members option Ifthe Staff form is displayed press Browse or Ctrl O highlight a record then press OK Ifthe Query form is displayed highlight a record then press OK Click the Other tab Press Record Lock Status The Record Lock Status form is displayed Check Lock Record to manually lock records Only users with administrative access can modify locked records Press OK to save Save and close staff re
75. ID field need not be descriptive Check Primary Occupancy for Prop ID then save and close occupancy record Complete the steps To Add New Occupancy to Multi Occupancy Property Record or To Link Existing Occupancy to Multi Occupancy Property Record to link existing occupancies to the multi occupancy property records To Add New Occupancy to Multi Occupancy Property Record From the File menu select the Occupancy Management option Multi Occupancy Properties option Ifthe Multi Occupancy Property form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Press New next to Add Link Complete the occupancy record values as needed Save and close occupancy To Link Existing Occupancy to Multi Occupancy Property Record From the File menu select the Occupancy Management option Multi Occupancy Properties option Ifthe Multi Occupancy Property form is displayed press Browse or Ctrl O select the record from the list then press OK Occupancy Management Ifthe Query form is displayed select the record from the list then press OK Press Add Link The Query form is displayed Select the occupancy to link to the multi occupancy property then press OK Close when finished 00O To Remove Occupancy from Multi Occupancy Property Record From the File menu select t
76. Mat Report About Wildland Fire Reports To Add Wildland Fire Report About Staff Activities To Add Incident Related Staff Activity Not Response Related About Incident Equipment Usage To Add Equipment Used About Dollar amp Loss Value Reports To Add Dollar Loss amp Value Report About Arson Investigation Reports To Add Arson Investigation Report About Vehicle Accident Extrications To Add Vehicle Extrication Report About NFPA 1710 1720 Information To Add NFPA 1710 1720 Information About Narratives To Add Incident Report Narrative 158 158 158 160 161 163 163 165 165 166 166 166 166 167 167 167 167 168 168 To Enable NFIRS Auto Generated Narratives About Special Studies To Add Special Studies Completing User Fields To Add User Field Values About Record Locking and Modification To Manually Lock Record To View Manual Record Lock Status To View Record Modification History About State Import Export History To View State Import Export History About Report Authorizations To Add Report Authorizations Completing Responding Units and Personnel Without Editing Main Incident 168 169 169 169 169 170 170 170 170 171 171 171 171 173 Adding Unit amp Personnel Response Entry outside an Incident Report 173 To Add Unit and Response Entry to Existing Incident 173 Investigation Reporting Section Adding Investigation Reports 176 Adding Basic Investigation Records 176 To Ad
77. Name field The default information is displayed in the Group Name field These groups can be modified to fit your needs or new ones can be created Type a Group Name that describes the group All users that have been added are listed in Group Members Type or look up an FDID associated with the group Check the box preceding the user name to add the user to the group the selected user will be given the same rights as the group Specifying rights is the same for groups as it is for individual users See the steps for specifying security on page 62 To Assign User to Existing Group Select the Administration menu Select Users and Security The Users and Security form is displayed Select user s to add to a group Press Add to Group Available groups are listed Select group Press Close OO00 O80 Reviewing User Activity A log of each user s access history is available To Review Log of User Accesses Select the Administration menu Users and Security option The Users and Security form is displayed Select the user then press Properties Users and Security Press View Login Info A listing of past accesses by the user are listed Press OK when finished Save and close User Setup form when finished To Review Current User Information Select the Tools menu select Display Current User Info option The Current User Info form is displayed Press F1 for more information on form op
78. Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Inspections amp Activities tab Existing inspections and non incident occupancy activities like plan reviews public education etc performed at the occupancy are listed Highlight inspection and press OK Click the Violations tab to display the Inspection form Violations section Press Add to add a new violation or highlight an existing violation and press Edit to modify an existing violation The Violation Detail form is displayed Enter the violation details including the following dates Next Reported Scheduled Recheck Actual Recheck Repaired Ist Required If no Disabled If violation not Leave Empty Repair date if Inspection recheck is fixed or no applicable scheduled check variance is Violation Noted issued check Do Not Schedule Violation Noted Recheck Enter Schedule Recheck the date the and enter date violation was for next discovered inspection If Violation Noted Schedule Recheck is checked the violation remains outstanding until an additional inspection is conducted Below are the values displayed for the violation in the Violation Detail form 2nd Reported date Next Recheck Same as above Date Repair date if Inspection from previous date from inspection applicable i
79. Report form Basic section or the EMS Search amp Rescue Report form Basic section based on the latest Cleared date and time entered for responding unit detail records Note that if you complete the EMS Search amp Rescue section of the Unit Response Detail form the Enroute to Dest time is used instead of the Cleared time from the Unit Response Detail form Basic section Check Enable Apply to All option for fields during unit data entry to allow information in unit response detail records to be applied to all other unit response detail records added for the incident Check Provide option to enter responding units amp personnel from outside the incident report to allow non administrative users to add responding units and personnel to incidents via the File menu Unit amp Personnel Entry option When disabled non administrative users will not see the Unit amp Personnel Entry option on the File menu Press OK Specify General Incident Authorization and Locking Requirements Select the Administration menu Administrative Options option Click the Incident tab All Incidents tab Authorizations amp Locking tab Check Require Officer in Charge and Member Making Report authorizations to require that Officer in Charge and Member Making Report authorization records be entered to complete the incident Check Require a Quality Control check authorization to require a quality control check to save the incident Check D
80. Select a vehicle and press OK to add vehicle information to the extrication report Press Save then Close To add additional vehicle accident extrication reports press Add or press Close if finished Save and close incident About NFPA 1710 1720 Information NFPA 1710 for career firefighters and EMS personnel and NFPA 1720 for volunteers define minimum response times to an emergency and minimum fire company and EMS staffing levels The NFPA 1710 1720 Information form provides a method for tracking compliance with the standard To Add NFPA 1710 1720 Information From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Adding NFIRS 5 0 Incident Reports 167 168 Click the Additional Reports tab Press NFPA 1710 1720 Information The NFPA 1710 1720 Information form is displayed Add information as needed The Alarm Date is associated with each completed time field Press the lookup button for the completed time field to specify a date other than the Alarm Date Press Same as Response and select the unit to add the date and time for a responding unit added to the Units amp Personnel section Save and close O About Narratives Narratives can be typed or automatically gene
81. Select the Administration menu Administrative Options option Click the Hydrant tab Check Prompt to add record when in out of service status changes System codes for IN service and OUT service will automatically be selected Select the drop down arrow to choose the appropriate Hydrant Flow Test Equation used by the department If the specific equation is not listed and the equation is available to the department select Custom to enable the fields for expression entry Press OK Specifying Invoicing Administrative Options The optional FH Accounts Receivable module includes several administrative options For more information on FH Accounts Receivable see the FH Accounts Receivable Installation and Introduction Guide Specifying Administrative Options 59 Chapter 5 Users and Security To access FIREHOUSE Software you must have a user name and a password Security is enabled by controlling the access of each user to specific areas Security serves two primary functions e Selective access to specific areas e Maintain record modification history Each user does not need access to all areas Selective access helps assure appropriate confidentiality of sensitive information and minimizes potential administrative problems For example most users do not need access to staff member administrative information You also do not want to allow all users to perform administrative actions that could impact the system Desi
82. Storage Tank Details 121 Record 100 A ht About On Site Materials Product 121 About Inventory Specifications 101 a S abies oe ee To Add Onsite Materials or Products 121 To Add Inventory Specifications 101 i i About the Needed Fire Flow Calculation 122 Tracking Inventory Maintenance 102 Te Caii ieod Bas fi io To Add Maintenance Test Records 102 PE S D To Add Scheduled Maintenance 104 About Occupancy Permits 122 To Run Maintenance Due Report 104 To Add a Permit 122 Tracking Inventory 105 To Renew Expired Permit from Occupancy 123 To Renew an Expired Permit Outside To Add Inventory Item 105 Occupancy 124 To Add Inventory Item Usage from Inventory To Renew Multiple Expired Permit Outside Form 106 O 124 To Review Inventory 106 Ben eA cB 125 About Linked Inventory 106 pea s 7 b aa atien To Add Tinked Taventory 106 o View Incident Responses to the ein To Review Equipment Hierarchy 107 maero M ae About Inventory Form Other Section Options 107 i ne mene ne i jei 196 To Add Inventory User Fields 107 UPPEMOT f P ory Ta To Attach Files to Inventory 108 Reviewing Inventory Associated with RE Contents 3 Contents To Review Add Inventory Associated with Occupancy 126 About Preplan Information amp Alerts 127 To Add a Preplan Alert 127 To Display Detail Records from Related Property Records 127 About User Fields and Attachments 128 To Complete User Fields 128 To Attach Files and or Signatures 128 About Locking and Modification 128
83. Workstation Location field Change if necessary Type the Alarm Date This date is when the alarm was received by the fire department and must be the same as the date for the alarm time The Alarm Date in conjunction with FDID Alarm Time and Incident Number fields uniquely identifies each incident Type the Alarm Time that the alarm was received by the fire department Use military time Type the Incident Number or press Tab to automatically assign a number auto numbering must be enabled via the Administrative Options form Incident section NOTICE To change EMS Service FDID Alarm Date or Incident Number after the incident is saved you must renumber the Change Key Values incident via the Form menu Renumber EMS Search amp Rescue Incident Reports option 186 EMS Search amp Rescue Incident Reporting Type or look up the Occupancy ID key value for the occupancy where the incident occurred at When used the address information from the occupancy record is inserted into the address fields Address values brought from the occupancy record cannot be modified on the form if Allow scene address data to be changed even if Occupancy ID is used is not enabled in the Administrative Options form Incident section General section Check Mass Casualty if appropriate used by certain EMS code sets like NHTSA 2 NEMSIS Check No Patient Found if there is not a patient for this EMS record Select Addres
84. a the training or activities the staff member has taken to fulfill the requirement in the time between the Current Cert Date and Expiration Date are listed in the Details for area Press New to add an additional staff member to the training program or save and close record To add multiple staff at a time press Add Group The Staff Group Select form is displayed The process for adding groups is the same as adding groups to staff activities See page 88 for details Complete remaining fields and add related records as necessary Notes are added from the Notes section User defined fields attached files and equipment usage records are added from the Other section Save and close when finished Renewing Expired Certifications Training programs are set up with an expiration date and should be renewed periodically To Renew an Expired Certification From the File menu select the Training Programs and Certifications option Update Expired Certifications option Select the training program and press Update Update staff member training program detail then save and close Press Close O00 To Renew Multiple Expired Certifications From the File menu select the Training Programs and Certifications option Update Expired Certifications option Select the training programs and press Update Group Select multiple items by pressing Ctrl while selecting A training program is selected when the name is highlighted P
85. ac arrest press Include Cardiac Arrest Add cardiac arrest information Save and close To Add Device Data o0o000000 From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Clinical tab Device Data tab Press Add The Medical Device Data form is completed Complete fields as needed Save and close Medical Device Data record Save and close patient record when finished To Add Patient Vitals and Assessments From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK EMS Search amp Rescue Incident Reporting Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Assessments amp Treatments tab If Use Auto Increment is checked either the Arrived Pt Vict time or the highlighted vital procedure medication time plus the interval specified in Auto Increment is used in the d
86. ach files Note that photos are attached from the Photos section but you can attach images or other files in a non FH format if necessary To Complete Investigation User Field s From the File menu select the Incident Investigations option Investigation Reporting Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query form is displayed select the record to modify and press OK Click the Other tab Press User Fields Add information Save and close To Attach File to Investigation From the File menu select the Incident Investigations option Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query form is displayed select the record to modify and press OK Click the Other tab Press Attachments Press Add Press F1 for more information on attaching files Save and close About Investigation Locking and Modification History Investigations can be locked from modification by non administrative users who do not have override record lock rights A complete history of modifications can be viewed for the record To View Record Lock Status From the File menu select the Incident Investigations option Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query f
87. aining Program Detail form is displayed Type or look up the staff member s ID in Staff No Type or look up the Original Cert Date that the staff member was certified if applicable Type or look up the Current Certification Date the current certification was given to the staff member if applicable If you change the date in this field all activities training classes attended in the period between the current and expiration date are displayed Type or look up the Current Exam Score the staff member was given towards receiving the current certification if applicable Type or look up the Expiration Date the certification lapses becomes invalid If a value is entered in the Duration in Months field of the Training Program form this date is calculated for you Review requirements The Requirement Summary area lists training or activity requirements the staff member must take to satisfy certification requirements e Type lists the type of training T for training A for activity and E for elective e Code is the Training Category Activity Type or Elective Category code group e Req d Hrs is the number of hours required e Cur Hrs is the number of hours currently met Understanding Training Program Records 95 96 e Balance is the required hours minus current hours for the staff member Review requirement details When a specific requirement is highlighted in the Requirement Summary are
88. al tab Check Require passwords to require a password to access FH We recommend that this option be enabled Check Allow workstation to be locked to allow the Lock Workstation option File menu Lock Workstation option to be used Check Inactivity timeout after and specify the number of minutes for the program to timeout When the program times out you must enter a valid user name and password to reenter the program Administrative Options Select Prompt for password reentry to lock the workstation and require a password for reentry The timed out FH occupies an FH license Select Logoff user to log the user out of FH Unsaved changes are lost when the program times out The timed out FH does not occupy an FH license Check Audit failed logins after and specify a number of attempts to lock the program after a certain number of login attempts If the number of attempts are exceeded the program adds a failed login attempt to the audit log Press OK To Specify Password Complexity Rules O O 800 Select the Administration menu Administrative Options option Click the General tab Check Minimum length then specify the shortest password allowed to require that passwords are a certain length Check Require change every then specify the interval in days that users are required to change their passwords Check Must contain letters numbers or special chars to require that passwords include a combin
89. alculate Cost is not checked enter the Total Cost Add remaining information as necessary then save and close the form Save and close inventory record 000000 O 0000 Understanding Inventory Records 105 106 To Add Inventory Item Usage from Inventory Form From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option Ifthe Inventory form is displayed press Browse or Ctrl O select record and press OK Ifthe Query form is displayed select record and press OK Click Usage Purchasing tab Press Add Type or lookup Date the item was added Select a Usage Type Type or lookup Usage Code Check Auto Calculate Cost to calculate the quantity entered in the Quantity field times the Hr Unit Cost value entered for the item on the Inventory form Basic section Select Use Specify Quantity If Auto Calculate Cost is not checked enter the Total Cost Add remaining information as necessary then save and close the form Save and close inventory record O00000 O 0000 To Review Inventory From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option Ifthe Inventory form is displayed press Browse or Ctrl O select record and press OK Ifthe Query form is displayed select record and press OK Click Usage Purchasing tab The Total Quantit
90. allow batch updating of contacts to disable this functionality Press OK To Enable Append Only Notes and Narratives 000 Select the Administration menu Administrative Options option Click the Database tab Data Security tab Select the narratives or notes fields to enable append only for When a specific field name is checked text can only be appended at the end of the narrative Press 4 to the left of the field name and records that use the field are listed Deselect specific fields if append only should not be required for that record Administrative Options Press OK To Define Field Captions Select the Administration menu Administrative Options option Click the Database tab Field Captions tab Select the field that you want to add a custom caption for Type the caption to use for the field on data entry forms in the Field Label area Custom Value field Optionally press Apply custom text to all fields to apply the custom field caption to all fields that have the same System Default Description When the selected field is lookup driven you can also specify a custom lookup category description in the Field Category Description area Custom Value field Press OK Specifying Incident Administrative Options Incident administrative options control global incident requirements NFIRS and EMS incident requirements and Investigation requirements To Specify General Inc
91. and End range if your state requires a unique lithocode for each patient Lithocode is listed on the Patient Victim Information form Other section after the patient record is saved Check Require Crew Member Numbers to require that crew numbers be assigned to staff performing assessments or procedures Assign crew via the Patient Victim Information form Other section by pressing Assign Crew Member Numbers Specify NEMSIS reporting requirements NEMSIS EMS Code Set must be installed Check NEMSIS Export only data elements required for the national database to only include the NEMSIS elements required for the national database When not enabled all NEMSIS elements are included Check NEMSIS include patient confidential information in export to include confidential patient information like name social security number etc in the export Enter or lookup an inventory class code if the Inventory module is enabled for Medical Devices Inventory Class to set the inventory class code identifying NEMSIS medical inventory items Press OK To Specify EMS Privacy and HIPAA Tracking Select the Administration menu Administrative Options option Click the Incident tab EMS Search amp Rescue tab then click the Privacy and HIPAA tab Type or look up a printed report form to use when printing from the HIPAA Status form Specifying Administrative Options 53 Check Display the patient narrative in the patients li
92. and No to restrict access When access to a specific lookup table or lookup category is restricted the user can not add edit delete or merge lookup codes for the restricted lookup categories If this user does not need access to distinct value lookups or add ons the user name and password is ready to be used to access FH Save and close the User Setup form then add additional users or exit the Users and Security form If this user needs access to distinct value lookups or add ons you should assign these rights for the user To Assign Distinct Value Lookups for User Non Administrative Users 0000 If the Users and Security form is not already displayed select the Administration menu Users and Security option select the non administrative user to modify then press Properties Click the Distinct Value Lookups tab Press Allow All to allow access to all lookup categories Press Restrict All to restrict access to all lookup categories Select a specific distinct value lookups to assign rights to the category When you select a specific category you are prompted to specify access to subcategories Press Yes to grant access to all subcategories and No to restrict access When access to a specific category is restricted the user can not add edit delete or merge distinct lookup values for the restricted categories If this user does not need access to add ons the user name and password is ready to be used to acces
93. and complete as needed Press Save All units added for the incident are listed in the lower right area of the Basic section and if necessary an additional unit can be added by pressing and a listed unit can be removed by highlighting the unit and pressing To Edit a Single Responding Unit From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click Units amp Personnel tab Highlight the responding unit to edit Press Open The Unit Response Detail form is displayed Change values as needed Save and close o0o000o0 To Edit All Responding Units From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe default query for selecting NFIRS Incident Reports is displayed you are ready to select an incident then press OK Click Units amp Personnel tab Press Open All The Unit Response Detail form is displayed All units added for the incident are listed in the lower right area of the Basic section and if necessary an additional unit can be added by pressing and a listed unit can be removed by highlighting the
94. ant activity repair To Track Staff record from the Hydrant Activity form Other section if Time you want to track staff time for the activity and associate the activity with staff records Click the Flow Test tab Adding Hydrant Records 217 218 Type Measurements area values Flow Calculation Results area values are automatically calculated If Override Automatic Flow Calculations is checked you can manually type a flow figure NOTICE You can specify custom flow calculations or select from several defined calculation methods via the Flow Calculations Administrative Options form Hydrant section Save and close hydrant activity when finished Save and close Hydrant Management Chapter I5 Operations Once records are entered into FIREHOUSE Software there are many ways the information can be used This chapter covers ways to use FH effectively to access the data you have entered and to use the program to simplify entering data including information about e Attach Files to Records e Export NFIRS Incidents to State e Using the Department Journal e Using Reports e Using Spell Check 219 220 Attach a File The following procedure applies to all areas where you can associate attached files with records Other section Press Attachments amp Signatures If you are adding the first attachment the Attachments amp Signatures form is displayed If previous attachments have been ad
95. ard to be pasted into an external program To output to a report printer or external file format press The Output Report To form is displayed Select an output format Select Screen if you want to preview the report before printing Operations o Select Default Printer to use the printer set up as the workstation default If you need to change default printer settings press Printer Setup at the bottom of the form and select the printer to use as the default printer for all Windows applications Select Select Printer to specify a printer to direct the report to a printer other than the default without changing the default printer o Select HTML Graphical to output the report in HTML format HTML files can be viewed and printed by many software programs all internet browsers and many text editing programs o Select PDF to output the report in a PDF format PDF files can be viewed and printed by Adobe Reader free software available from Adobe o Select Other File Type and select from external data formats like Excel compatible spreadsheet only available when output results in formatted tables Press OK Press Close To output a report to the Windows clipboard Press amp 3 then press OK to prompt The records are inserted into the clipboard and ready to be pasted into another application The Ctrl V keyboard key pastes the Windows clipboard contents into the active application Press
96. at maintenance is due every time the number of miles specified elapses Ifyou enter a value in Hour Interval the maintenance testing is scheduled every time the number of hours specified elapses Ifyou enter a value in Number of Days the maintenance testing is scheduled every time the number of days specified elapses Select Auto Create Future Maintenance to schedule future records based on the usage This option is only available if a value is entered in Number of Days Do not rely on auto scheduled maintenance testing for Critical critical items that must be tested at a precise interval if Maintenance intervals other than days are used If values other than days are used maintenance may actually be due for maintenance before the date in the scheduled maintenance record depending on usage Press Save IfAuto Create Future Maintenance is checked the Define Auto Maintenance Parameters form is displayed Add information about maintenance records then press OK Press Close Save and close inventory record To Run Maintenance Due Report Select the Reports menu Apparatus Equipment amp Inventory Reports Select the Apparatus amp Equipment Maintenance Reports category Equipment Due for Scheduled Maintenance report Apparatus Equipment and Inventory Press Run Select output then press OK Complete query parameter values to limit included records or leave as is and press Run Query to l
97. at the default rate If 10 is the default rate the member is paid 30 Add an hourly cost billing rate by entering the effective date range selecting Hourly Cost Billing Rate then entering a value in Hourly Cost Adda pay scale rate by entering the effective date range selecting Pay Scale Rate then entering the Pay Scale code and the Pay Scale Amount Save and close when finished then press Close Press Casualty Reports to enter casualty reports for the staff member The Fire Service Casualty Report form is displayed also used for incident reports when there are fire service casualties When accessed from the staff member record the casualty report will not relate to any specific incident Casualties can also be added from Staff Activities or Training Class records Save and close when finished then press Close Press EMS Exposures to display a list of EMS exposures for the staff member EMS exposures are added from the EMS Search Rescue Report Patient Victim Information form Highlight exposure then press Open to review Save and close when finished then press Close Click the EMS tab to complete emergency medical service related information about the staff member required for some EMS code sets Click the Notes tab and add staff administrative notes When you are finished press F7 to spell check entered text Save and close record when finished Staff Records 83 84 Associating Users With Login R
98. ate to use the amount associated with the pay scale code and multiply it by hours paid staff member s default hourly rate is ignored Add additional information as needed Save and close when finished About Incident Response Information Enter NFIRS 5 0 Fire incident response information To Add Incident Response Information From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe default query for selecting NFIRS Incident Reports is displayed you are ready to select an incident then press OK Click the Response tab Check Count from detail forms to skip the area below and count resources apparatus and personnel from the detail forms Units amp Personnel section If you do not add units and personnel and Count from detail forms is not checked Type the number of fire apparatus and vehicles excluding EMS vehicles that responded from your department in Suppression Apparatus Enter the number of fire personnel that responded from your department other than personnel responding in EMS vehicles in Suppression Personnel Enter the number of EMS vehicles that responded from your department in EMS ALS BLS Apparatus Include Advanced Life Support and Basic Life Support units Enter the number of personnel that responded to this incident in
99. ather specific incident related information The sections required to complete an incident report vary based on what type of incident is indicated The Basic section is required for every incident Entries in the Basic section determine what other modules need to be completed based on the type of incident involved For example all types of incidents require the Basic section but only fires require additional reporting using the Fire section NFIRS 2 and or Structure Fire section NFIRS 3 NOTICE FH automatically indicates required optional and inapplicable sections using color coding and disabling Color Coding inapplicable sections so you do not need to know when specific sections are required The information below is for your reference Below is a matrix representing what sections NFIRS calls these modules are required based on incident type entered in the Basic section of the incident form Basic described page 136 Fire described page 153 Structure described page 153 Wildland described page 160 Buildings III X X X Special Structure Not a Building 112 X X X Confined Fire Within Structure 113 118 X Mobile Property Used as Structure 120 123 X X X Vehicle 130 138 X X Vegetation Not Cultivated 140 143 X X X Either Fire or Wildland Outside Rubbish 150 155 X Special Outside Fire 160 164 X X Cultivated Vegetation 170 173 X X The Civilian Fire Casualty Module NFIRS 4 and t
100. atient Records 195 To Add Basic Patient Information 195 To Add Patient Response Details 196 To Complete Patient Scene Information 196 To Add Vehicle Accident Information 197 Add Search amp Rescue Report 198 To Add Patient Clinical Complaint Information 198 To Add Patient Clinical Provider Information 198 To Add Injury Illness Details 199 Contents To Complete the Injury Matrix To Complete Cardiac Arrest amp CPR To Add Device Data To Add Patient Vitals and Assessments Add Patient Procedure Add Patient Medication To Replicate Patient Assessments Procedures Medications 199 200 200 200 201 202 203 To Add Patient Status amp Transport Information 204 To Track HIPAA Notices To Add a Patient Narrative To Complete Patient User Fields 204 205 205 To Attach Files and Signatures to EMS Patient To Manually Lock Patient Record 205 205 To Display EMS Patient Completion Status 206 Adding Additional Reports to EMS Reports 206 To Initiate NFIRS Incident Report from EMS To Add Equipment Used About the EMS Incident Narrative Complete EMS Incident Report Narrative Section About Other EMS Records To Add User Fields 206 207 207 207 208 208 To Attach Files and Signatures to EMS Incident 208 To Manually Lock Records To Review State Import Export History 208 209 To Display EMS Incident Report Completion Status 209 Dispatch Remote Station Incident Reporting Section
101. ation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query form is displayed select the record to modify and press OK Click Scene tab Add scene information Save and close Adding Investigation Reports 181 182 About Investigation Activities Investigation activities conducted by staff should be tracked and can be added from the investigation record To Add Investigation Activity From the File menu select the Incident Investigations option Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query form is displayed select the record to modify and press OK Click Activities tab Press Add Add staff activity details then save and close Save and close investigation record About Investigation Narratives An investigation narrative can include a description of the investigation To Add a Narrative From the File menu select the Incident Investigations option Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query form is displayed select the record to modify and press OK Click the Narrative tab Type a narrative Save and close Completing User Fields and Attaching Files You can complete user fields if they have been defined for investigation records and att
102. ation of letters and numbers or special characters Press OK Specifying Database Administrative Options Database administrative options control database auditing automatic numbering backups rules and security and default values Key values are record identifiers that uniquely identify a record When you create a record the key counter is the field that contains the value that identifies the record The key counter can be generated by the system or you can create it yourself A specific key counter value can only be used in one record To Specify Database Audit Tracking Options Select the Administration menu Administrative Options option Click the Database tab Auditing tab Check Enable basic audit tracking This needs to be enabled if you use export to import from station since it adds modified dates to records Check Enable detailed audit tracking to enable audit tracking options When checked the following additional options are available Specifying Administrative Options 43 44 Select Track changes to records to track user name and date of all changes to records Every time a record is saved this option adds the user name and date to the list of changes made to the record Select Track changes to fields and track user name date and fields changed Select individual databases to track For each listed database a check in the box in the Audit column indicates that the database audit t
103. ative section About EMS Incidents 207 208 Save and close About Other EMS Records There are other EMS related records that can be added to EMS incidents including user defined fields attachments and signatures record lock status record modification history and state import export history To Add User Fields From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Other tab Press User Fields Complete applicable fields The steps to add user defined fields are detailed in the Advance Feature Reference Save and close user defined field form Save and close To Attach Files and Signatures to EMS Incident From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Other tab Press Attachments See Attach File to Record on page 220 for details Save and close Attachments amp Signatures form Save and close To Manually Loc
104. available personnel based on the criteria listed in the Staff Group Select form Saved Groups to list available personnel based on a saved group you select Select the method for Default Station Shift and Unit in Activities Training and Scheduling for defaulting values in records Select Use the default station shift and unit from the activity training or schedule record to apply the default values for the master activity training schedule record to the detail record Administrative Options Select Prompt to replace with the station shift and unit from the staff master record if specified and different to prompt the user to choose between the default Station Shift Unit value or the Station Shift Unit value associated with staff member record when the values are specified in the staff member record and are different than the defaults in the activity training schedule record Select Always default the station shift and unit from the staff master record if specified to use the Station Shift Unit value from the staff member s record if available without prompting the user The Station Shift Unit defaults from the activity training schedule record is used if a Station Shift Unit value is not specified in the staff member record Check Prompt to add history record when rank status or hire date changes to prompt to add a history record when a staff member s Rank Status or Hire Date are changed and the record
105. ayed select the record to modify and press OK Press Linked Investigations Press Add and select investigations to link together then press OK Save and close About Referrals Referrals are agencies if any that an investigation is referred to for follow up investigation This might be a law enforcement agency that has jurisdiction for a criminal investigation or another fire department that will conduct the investigation To Add Referrals From the File menu select the Incident Investigations option Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query form is displayed select the record to modify and press OK Click the Referrals tab Press Add The Investigating Agency form is displayed Adding Investigation Reports 177 178 Type or look up the Department Agency Code and optionally the Case Number assigned by the department agency and Referral Date Save and close referral Address and contact information associated with the agency lookup code is listed in the Investigation form Referrals section Save and close About Evidence Records Evidence records include details about each piece of evidence collected during the investigation details about tests performed on the evidence tracking the chain of evidence custody and notes To Add Basic Evidence Record From the File menu select the Incident Inves
106. b Press Add The Generic Equipment Detail form is displayed Type or lookup the equipment number for the generic equipment you wish to add to the current equipment record in Generic Inventory ID When you perform a lookup a list of inventory records marked as Generic Equipment is displayed Type or lookup the Location Code Type the number of generic equipment items in Quantity Type the value of the generic equipment in Unit value The total value Quantity times Unit Value is displayed in Total value Type notes on the generic equipment detail record Save and close Generic Equipment Detail form Save and close inventory record About Inventory Specifications You can add specification details for the inventory record Available specification values vary depending on the inventory type Once an inventory type is selected and specifications are added you should not change the inventory type Changing the type results in loss of data To Add Inventory Specifications From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option Ifthe Inventory form is displayed press Browse or Ctrl O select record and press OK Ifthe Query form is displayed select record and press OK Click the Specs tab Select the Inventory Type for the inventory record Changing the type after maintenance records are added results in loss of data Inven
107. b Press HazMat The HazMat Report form is displayed Press Add The Hazardous Materials Release Detail form is displayed Note that a list of chemicals with associated UN and CAS Number when available are available by pressing Chem Lookup This list includes chemicals included in NFIRS a link to the CAMEO database if available and set up from the Workstation Options form File Locations section other HazMat Reports and Occupancy Chemical Inventories Type the 4 digit UN Number assigned to the hazardous material Leave the entry blank if a UN number has not been assigned Type or look up the DOT Haz code that corresponds with the hazard classification and division code as found on a placard or label in the NAERG or from the list Type the CAS Reg Number assigned by the CAS to the chemical including dashes This number may be found in reference materials on Material Safety Data Sheets MSDS and on some product labels Leave the entry blank if a CAS registration number has not been assigned Type or look up the chemical or trade name of the hazardous material as shown on the MSDS in Chemical Name product label packaging or container Type or look up the container Type code Type the estimated amount of material that the container was designed to hold in Capacity by volume or weight to the nearest whole unit of measure Type or look up the Capacity Unit code for the appropriate unit of measure Ty
108. buting To Ignition Required if the fire cause is not Intentional or Under Investigation unless None is checked Type or look up applicable Human Factors Contributing To Ignition codes Check None and skip to the next section if none are applicable Type or look up applicable Fire Suppression Factors codes Click Equipt amp Mobile Property tab Enter Equipment Involved codes that best describe the equipment involved in the ignition If no equipment was involved in ignition check None Enter the Brand name of the equipment involved if known This refers to the name that the equipment is most commonly known by This information can be quite useful nationally for product recalls Type or look up the Model number of the equipment involved if known This refers to the model name or number assigned to the equipment by the manufacturer Type the Serial Number of the equipment involved in ignition if known This refers to the manufacturer s serial number that is usually stamped on an identification plate Enter the model Year of the equipment involved if known Type or look up the Equipment Power Source code that best describes the power source of the equipment involved in ignition Type or look up the Equipment Portability code that best indicates the portability of the equipment involved in ignition of the fire Type or look up the Mobile Property Involvement code indicating whether mobile property was involved Ty
109. can review a list of incident responses to the occupancy record To View Incident Responses to the Occupancy From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Additional Records tab Press Incident Responses Fire and EMS incident responses are listed Press Close Save and close occupancy when finished Ooo 0O Adding Occupancy Records 125 126 Tracking Occupancy History You can track changes made to an occupancy record using supplementary history details You can specify in the Administrative Options form Occupancy section to be prompted to add a supplementary history detail record when the occupancy name or building information changes To Add Supplementary History Detail From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Additional Records tab Press Supplemental History If supplementary history records are listed press Add Add supplementary history details Save and close Reviewing Inventory
110. cident report to display a form for specifying the activity start date and time and the activity end date and time when adding staff activities from incident records The elapsed time is used in Hours Paid Optionally select Except for the listed codes warn if hours are entered for absent staff members on options Check Activity Codes to warn when hours are entered for a staff participant detail when Attendance Status indicates an absence Check Training Categories to warn when hours are entered for a staff participant detail when Attendance Status indicates an absence Optionally complete Public Education Service area requirements for Staff Activity records Check Require public attendance numbers for the following activity codes and specify the activity codes to require attendance numbers for included in the Staff Activity form Public Education Service section Check Hide fields for public service smoke detectors and safety seats installed to remove the Public Service area fields from the Staff Activity form Public Education Service section Optionally require that all rating bureau information be completed to complete a training record by checking Require responses for all rating bureau criteria codes Rating bureau criteria are added via the Training Class form Rating Bureau section Press OK To Specify Staff Administrative Scheduling Options Select the Administration menu Administrative Option
111. clinical assessment that drove the choice of treatment Complete Times area fields The incident record s Alarm Date is associated with each completed time field by default press the time field s lookup button to change the date Type the time the dispatch was notified by the caller in Dispatch Notif if used Type the First Arv Scene time Always enter the time of day that the first fire department personnel arrived on scene Use military time Type the Last Clr Scene time Always enter the time of day that the last fire department personnel left the scene Use military time If cancelled en route enter the time of cancellation in this field Type or look up the Station identifier of the station Use to track incident data collected and reported by individual stations Complete remaining fields as needed You will generally add additional information including units and personnel Save and close record when finished EMS Search amp Rescue Incident Reporting About Units amp Personnel Add responding units and personnel You can add responding units and personnel as individual records or by using previously defined groups We recommend adding units and personnel now since they may be used in other areas of the EMS incident Access to aid given received details depends on the entry in the Aid Given or Received field on the EMS Search amp Rescue Report form To Complete Aid Given Received Details
112. code o Check Use Pay Scale as the Hourly Rate to use the amount associated with the pay scale code and multiply it by hours paid staff member s default hourly rate is ignored Add additional information as needed Save and close when finished O 194 EMS Search amp Rescue Incident Reporting Adding Patient Records Access to patient information is controlled via security Access to patient records can be limited to personnel that entered the patient records if needed Required fields vary widely in EMS patient records based on the selected EMS code set Required Fields To Add Basic Patient Information O O O 000 From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Press Add The Patient Victim Information form is displayed Type the Last Name of the patient victim and additional patient name information if available Type or look up the Unit code for the unit responding for this patient victim A unique Patient Number is assigned The first patient for each incident is 001 the second 002 etc If patient victims are assigned account numbers type the Patient Account Previously entered acc
113. cord when finished To Review Record Modification History O O From the File menu select the Staff Members option Ifthe Staff form is displayed press Browse or Ctrl O highlight a record then press OK Ifthe Query form is displayed highlight a record then press OK Click the Other tab Press Record Modification History The Record Modification History form is displayed The amount of information displayed depends on the level of tracking selected from the Administrative Options form Database section Press CLOSE Save and close staff record when finished Staff Activity amp Training Understanding Staff Activity Records Staff activities are events incident and non incident related that staff members participate in Staff activities revolve around the user defined staff activity codes set up in the general system codes A single staff activity record can have multiple staff member participants A single participant can be added to a staff activity more than one time as long as a different Staff Activity Types code is used This allows you to track different types of activities for a single activity About Staff Activities The default staff activity information is defined in the main Staff Activity form Participants are then added and default from the main activity is applied to individual staff member s activity records You can modify activity default information after participants are
114. ction add personnel using the Add from Roster method and selecting unit A personnel that responded on unit B o If you want to add staff added to the unit from the station roster select Add From Roster The Staff Activity Group Add form is displayed Add or modify group participant details then press OK to add selected staff with participation details to the unit response record Individual staff member can be modified For example you Add individual can add a staff member in this manner and modify the Staff individual participation detail record to exclude response on a particular unit All participant detail records are automatically added to a staff activity record Optionally add equipment usage Click the Usage tab then press Add Linked to add a usage record for the responding unit or press Add Other to add a usage purchasing detail record for a different piece of equipment Optionally add unit narrative Click the Unit Narrative tab then type narrative Optionally add EMS Search amp Rescue response information This information is added to EMS Search amp Rescue incident patient records for the unit if an EMS incident is created from this NFIRS incident Click the EMS Search amp Rescue tab and patient information Optionally complete user fields attachments and signatures and other actions for the unit response Click the Other tab and complete as needed Pre
115. ctory via the Login form as you are accessing FH See the FH Help File Select Directory topic for information on selecting a directory Optionally specify the lookup code table location The lookup code tables are stored in the Database directory by default Allow FH to manage this location unless you have specific reasons for doing otherwise To specify Check Use an alternate location for lookup tables to specify a directory for lookup code tables Press Lookup The Alternate Lookup Location form is displayed Press Lookup and specify the location of the lookup directory then press OK Press OK Optionally specify where your CAMEO data is stored FH will use CAMEO data not compatible with the CAMEOfm version in chemical inventory records added for occupancy records To specify location Press CAMEO Data The Cameo Data form is displayed Press CAMEO Data specify location then press OK Press OK Workstation Options Press System to specify the location of the system directory Workstation options are stored in the system directory Press Queries to specify the location of the queries directory Press Reports to specify the location of the reports directory Press Help to specify the location of the online help directory For optimal performance FH Help must be installed to a location on C Check Check for duplicate or misplaced tables or database on startup to validate file locations See
116. cts set up in your department s area If your department coverage area is not divided into districts you do not have to use this field Shifts 1 character maximum codes for shifts If your department does not have multiple shifts you do not need to use this field Departments that do use formal shifts can still use this code For example a code for night and day can be used to track the number of incidents that occurred during the day and during the night Station 3 character maximum code for each station in your department This field is useful when running reports at multi station departments that summarize information For example list response times by running the Response Time Analysis report and select the station you want to list the information for Townships 4 character maximum code for townships covered by your department Departments that track boroughs instead of townships can use this field for boroughs Units 6 character maximum code for units These codes represent specific apparatus from your department that are used when responding to specific incidents Unit codes are entered in responding unit records and in apparatus and equipment master records Zones 10 character maximum code for zones Use zones to define service areas into geographic area If you are looking for a field to track box numbers use the Zone field described below Expand I Cities States and ZIP Codes to display available codes e C
117. d Add or modify group participant details then press OK to add selected staff with participation details to the unit response record Individual staff member can be modified For example you can add a staff member in this manner and modify the individual participation detail record to exclude response on a particular unit All participant detail records are automatically added to a staff activity record Staff Details Optionally add equipment usage Click the Usage tab then To adda usage record for the responding unit press Add Linked Note that current mileage and hour meter readings should be entered To adda usage purchasing detail record for a different piece of equipment press Add Other then select the record to add Note that the number of miles and hours to add to the equipment record should be entered not the miles and hours displayed on the equipment meters Save and close usage record Optionally add unit narrative Click the Unit Narrative tab then type narrative 144 NFIRS Incident Reporting Optionally add EMS Search amp Rescue response information This information is added to EMS Search amp Rescue incident patient records for the unit if an EMS incident is created from this NFIRS incident Click the EMS Search amp Rescue tab and patient information Optionally complete user fields attachments and signatures and other actions for the unit response Click the Other tab
118. d Basic Investigation Information 176 Associating Investigations with Incidents 176 To Associate Investigation with Incident 176 Linking Investigations 177 To Link Investigation 177 About Referrals 177 To Add Referrals 177 About Evidence Records 178 To Add Basic Evidence Record 178 To Add Evidence Test Records 178 To Add Chain of Custody Records 178 Adding Photos 179 To Add Investigation Photo 179 To Add Investigation Directory of Photos 179 To Preview Individual Photo 180 Adding Fire Arson Information 180 To Add Fire Arson Information 180 Adding Leads Involvements 181 To Add a Lead or Involvement 181 About Scene Information 181 To Add Scene Information 181 About Investigation Activities 182 To Add Investigation Activity 182 About Investigation Narratives 182 To Add a Narrative 182 Completing User Fields and Attaching Files 182 To Complete Investigation User Field s 182 To Attach File to Investigation 183 About Investigation Locking and Modification History 183 To View Record Lock Status 183 To View Record Modification History 183 EMS Search amp Rescue Incident Reporting Section About EMS Incidents 186 Adding Basic EMS Incident 186 To Add Basic EMS Incident Data 186 About Units amp Personnel 189 To Complete Aid Given Received Details 189 To Add Multiple Responding Units 189 To Add a Single Responding Unit 191 To Edit a Single Responding Unit 193 To Edit All Responding Units 193 To Add Staff Activities 193 Adding P
119. d Incident Property Information HEH From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Property amp Involvement tab Type or look up a Hazardous Materials Release code to indicate the type of hazardous materials if any involved in this incident You should complete the Hazardous Materials form if HazMat Report required by your state or local jurisdiction Otherwise a Hazardous Materials form is NOT necessary A Hazmat Report form found in the Additional Reports section is required whenever the code 0 Special hazmat actions required or spill gt 55 gallons is selected regardless of incident type Type or look up a Mixed Use code to indicate if the incident occurred at one of the listed mixed use properties or type NN Not Mixed Use Add a code even if the incident did not involve the entire complex for example a single store in a mall Adding NFIRS 5 0 Incident Reports 149 150 Press Weather to complete weather information may be used in the Wildland report if this is also a wildland fire see Wildland report page 160 for details Save and close record About Involvements The name of the person involved in the incident is needed for legal refe
120. d a blank Code For form is displayed Add values to the Code and Description fields Some lookup codes have slightly Completing the Comments different fields than the example below field is optional Additional available fields Sanma x are available for certain E lookup codes When you Gow add values to these extra zii fields those values are _ added to the appropriate record fields when the lookup code is used Check Hide This Codeif iii you want to exclude the code from the Lookup form hidden codes can be displayed by checking Show Hidden Codes at the bottom of the Lookup form Press Save The code description and comments are added to the lookup codes or if you edited an existing code the modifications are added Repeat the steps above for each code you wish to add then press Close to return to the Lookup Tables form Press Close if finished Lookups To Edit a Lookup Code When you edit a lookup code that is used in a record FH will change the value in the FH record to match any Changing Codes f In Use changes you make This process may take some time If you want to combine an existing lookup code with another code use the merge lookup code feature Select the Tools menu Lookup Tables option A form displaying available lookup code tables is displayed Select the lookup table you want to modify To display code categories for a code category group press Select a s
121. d to buildings open platforms bridges roof assemblies over open storage or process areas tents air supported structures and grandstands When accessible it is required To Add Structure Fire Report From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click Additional Reports tab Press Structure Fire The Structure Fire Report form is displayed Type or look up the Structure Type code that best indicates the type of structure involved in the fire Required for all structure fires Type or look up the Building Status code that best indicates the status of the structure Required for all building fires Type the Stories at or Above Grade value Do not count normally inaccessible attics or the roof Required for all building fires Type the Stories Below Grade value Required for all building fires Complete the Main Floor Size area fields Type the Total Sq Ft or type the Length in Ft and the Width in Ft The Total Sq Ft is calculated for you Type the Story of Fire Origin This number is assumed to be at or above grade UNLESS Below Grade is checked Count the ground floor as story 1 In the case of most residential basements you would enter 1 for story of origin and then check Bel
122. de for instructors This code indicates the instructor responsible for training the staff member The codes do not have to refer to a specific individual but you can add codes in the staff record Staff form Other section for an instructor and if the code has not been added to the lookup table the name of the staff member will be automatically inserted into the description for the code e Training Categories 12 character maximum code for the training category This code categorizes training classes into categories You can also associate default hours hours paid points and objective that are inserted into the training class and applied to training participant detail records The Training Categories code is a required field Minimum Recommended Equipment and Inventory Codes Equipment Location Codes 10 character maximum code for equipment locations Examples include compartment crosslay etc These codes are used in master apparatus records and generic equipment records Add groups for major apparatus records then name the specific location codes in each group so they will be displayed in the order of the physical locations Refer to the codes in DemoData for an example of how to set up location codes Inventory Class Codes 10 character maximum code categorizing equipment into general classes This field is used in the Egpt Class field in the Apparatus and Equipment form Maint Test Job Codes 10 character maximum code for different ty
123. ded the attachments list is displayed and you need to press Add With the Attachments amp Signatures form displayed press F1 on your keyboard to display the FH Help File Press Click for related topics for instructions on attaching a file To view an attached file highlight the attachment and press Run It Operations Exporting Transaction Files to State Transaction files contain standardized details about NFIRS or EMS incident reports that are sent to your state or regional data collection center The standardized data can be used to track important NFIRS or EMS trends There are two types transaction files the incident transaction file that includes incidents for a specific FDID and date range and the department information file that includes station information personnel and unit information for a specific FDID Typically department information needs to be submitted with the incident transaction files Your department information is added to FH in the Administrative Options form License section accessed from the Administration menu Administrative Options option About NFIRS Transaction Files Note that the station identified as central must include the FDID that you will be exporting If you need to export incidents for more than one FDID a station with each FDID needs to be designated as central Only incidents staff and units with the FDID of a station identified as central will be located Note that you must ente
124. describe the training subject Descriptive Training Categories codes make your life easier when it is time to search for specific training and or try to gather statistics on all training given in a specific period e Associate a Default Objective with each Training Categories code Entering the training objectives outline or training scenario up front makes entering complete training records much easier When you enter information in the Default Objective for a Training Categories code the Default Objective is automatically inserted into the Notes section of the training record You can edit the Notes section or add additional comments to further clarify the training session if necessary e Complete optional fields There are only a few required training class fields but some of the optional fields are important Enter Start Date Start Time End Date End Time Class Description if different than that of the Training Categories code description Training Type Fire Medical Rescue Other and Hours Worked Understanding Training Classes 91 92 Location Agency Method of Instruction for example Lecture Hands on Video etc Hours Paid Credit Points Pay Scale CEU number of Continuing Education Units if appropriate Dept Course Number and a few other fields are all optional Use them if appropriate Add all staff members who should have been present if Training Required is checked and indicate in the Tra
125. direction and speed are those at eye level not at higher altitude Enter the average wind speed to the nearest mile per hour at the origin of the fire Calm conditions are recorded as 0 Enter the Temperature in degrees Fahrenheit Check Below 0 if the temperature is below 0 Enter the Relative Humidity the measure of atmospheric water content expressed as a percentage 0 dry 100 rain Enter the Fuel Moisture percentage level Fuel moisture is the ten hour reading of the moisture content of a fuel stick taken in the general area of fire origin Fuel moisture is expressed as a percentage of the weight generally ranging from 0 to 25 percent Type or look up the Fire Danger Rating code that best describes the fire danger at the time and place of the fire based on the National Fire Danger Rating System Save and close the Weather Information form Type the Number of Buildings Ignited by the wildland fire If no buildings were ignited check None Type the Number of Buildings Threatened but not ignited by the wildland fire Check None if no buildings were threatened Type the Total Acres Burned If less than one acre was burned the decimal point field should be used to denote tenths of an acre Type or look up Primary Crops Burned codes for crops that burned in the fire Enter the crop with the most burned acres first If no crops were burned leave blank Click the Responsibility tab Check appr
126. displayed Complete permit information as needed then save and close When there are multiple permits being renewed you can select the permit at the bottom of the form to modify details for the highlighted permit Press Close Renew Multiple Expired Permit Outside Occupancy From the File menu select the Occupancy Management option Batch Renew Permits option A list of permits that expired in the Expiring between date range is displayed Modify the Expiring between start and end date and specify a Permit Type to limit the included expired permits Occupancy Management Check Don t show permit if the occupancy has a newer permit of the same type to remove expired permits from the list when a permit of the same type is issued for the occupancy Select expired permits Press and hold the Ctr1 key and select multiple permits then release the Ctrl key to select multiple permits that are not listed together Press and hold the Shift key and select multiple permits then release the Shift key to select multiple permits that are listed together Press Renew Group The Renew Permit s form is displayed Select permit number Select Auto generate the new permit number to allow FH to assign a new number Select Use a specific permit number and assign a permit number if necessary Add additional details for the renewed permit Press Renew Press Close 000 0O00 Reviewing Incident Responses You
127. distinction made as to whether or not a crime has occurred or a determination of criminal intent The Investigation Report may also be used when the fire is under investigation or in cases where the cause is Undetermined after investigation To Add Arson Investigation Report From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Additional Reports tab NFIRS Incident Reporting Press Arson Investigation The Arson Investigation Report form is displayed See the Investigation Reports starting on page 76 for more information About Vehicle Accident Extrications Add vehicle and extrication information when applicable To Add Vehicle Extrication Report From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Additional Reports tab Press Vehicle Accident Extrication The Vehicle Accident Extrication form is displayed Complete applicable information Press Copy Vehicle Info to review a list of vehicles added to other incidents
128. ds 8l 82 You specify availability for a member by setting up availability codes in the Staff Member Codes lookup codes then adding availability records for the member To Add Staff Availability From the File menu select the Staff Members option Ifthe Staff form is displayed press Browse or Ctrl O highlight a record then press OK Ifthe Query form is displayed highlight a record then press OK Click the Additional Records tab Press Availability Ifno availability records have been added for the staff member the Availability Detail form is displayed If availability records are listed press Add The Availability Detail form is displayed Type the From Date To Date start and finish date the availability applies to Type the From Time and To Time the availability applies to Press the days of the week in the On These Days area the availability applies to Enter a specific Station Shift Unit only if the availability applies to a particular station shift or unit for example indicate that staff member is available only for a particular station Note that if the Station Shift Unit of the event OR the Station Shift Unit of the availability record are blank that piece of criteria is ignored i e assumes a match Check Jf availability records overlap give this record priority if you want this record to override other overlapping availability records Press New to add additional
129. e HazMat Actions Taken code or press and select multiple Hazmat Actions Taken codes The first three are included in the export file Type or look up the If fire or explosion which first code Type 1 Ignition if a fire led to a release of hazardous materials Type or look up a Cause of Release code Type or look up a Factors Contributing to Release code for up to three significant factors and descriptors that contributed to the release or threatened release of the hazardous material or check None Type or look up Factors Affecting Mitigation codes for significant factors that impeded or affected the mitigation of the release or threatened release of the hazardous material or check None Click the Equipt Mobile Prop amp Disposition tab In the Equipment Involved in Release areas If no equipment was involved check None Otherwise complete the Equipment Involved Brand Model Serial Number and Year fields In the Mobile Property Involved in Release area If no mobile property was involved in release check None Otherwise complete the appropriate fields in the area Identify and record the number of civilian Deaths as a result of this HazMat incident Identify and record the number of civilian Injuries Check No Casualties if there were no casualties Type or look up the Disposition code that best describes the final disposition of the incident Press Save and Close About Wildland
130. e Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Assessments amp Treatments tab About EMS Incidents 201 202 00O O If Use Auto Increment is checked either the Arrived Pt Vict time or the highlighted vital procedure medication time plus the interval specified in Auto Increment is used in the detail record time Uncheck Use Auto Increment to leave the detail record time blank You can specify the interval to add before vital procedure medication records via the Administrative Options form EMS Search amp Rescue section Assessments amp Treatments section Press Add Procedure Time is automatically filled in based on the Arrived Scene time plus any time added for vital procedure medication records Change if necessary Change if necessary Type or look up the Procedure Code for the type of procedure performed Note that a default fee can be associated with a procedure code Complete additional information as needed Track consumable items used for the procedure in the Usage section To add additional detail records set the Auto Increment Value and check Use Auto Increment to automatically complete detail times or uncheck Use Auto Increment to leave the detail time incomplete and Press Rplcat to save and add another record Press Vital to save and add an additional vital assessment Pr
131. e System Used area information or check Not Applicable Complete remaining information as needed then save and close to return to the Patient Victim Information form Save and close To Add Patient Clinical Complaint Information From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Clinical tab Complaint tab Type or look up the patient victim s Chief Complaint Previous complaints used in other patient victim records are available for lookup Complete Signs amp Symptoms area Signs and symptoms relate to the chief complaint You will have the opportunity to complete additional signs and symptoms for individual injury and illness details if necessary Complete remaining information as needed Save and close patient victim record To Add Patient Clinical Provider Information From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK EMS Search amp Rescue Incident Reporting
132. e set up to ignore words or replace specific words with different words Operations To Specify Replacement Text 0O00 00 O From the Administration menu select Administrative Options The Administrative Options form is displayed Click the General tab Press SpellCheck Options The SpellCheck Options form is displayed Press the User Dictionary Words tab Press Add The User Dictionary Word form is displayed Select an action Auto Correct The word typed in the Word field is replaced with the word typed in the Auto Correct Text field exactly as entered in the Auto Correct Text field Auto Correct Preserve Case The word typed in the Word field is replaced with the word typed in the Auto Correct Text field exactly as the word to replace is typed i e if the word to be replaced is capitalized the replacement word is also capitalized Conditional Correct The user is prompted to replace the word typed in the Word field with the word typed in the Auto Correct Text field exactly as entered in the Auto Correct Text field Conditional Correct Preserve Case The user is prompted to replace the word typed in the Word field with the word typed in the Auto Correct Text field exactly as the word to replace is typed i e if the word to be replaced is capitalized the replacement word is also capitalized Exclude The word typed in the Word field is assumed to be misspelled even if it is inc
133. e staff activities Multiple staff activities for a single incident are useful for separating distinct activities that occur on different dates and times like emergency response and follow up investigation of the incident The default staff activity information is defined in the main Staff Activity form then participants are added and the default information defined is applied to the individual staff member s activity records You can modify default information after participants are added and staff members that have been added after the changes will have the new information applied Individual staff member activity records can be modified one at a time or changes can be applied to all activity participants in one step NOTICE A single participant can be added to a staff activity more than one time as long as a different Staff Activity Codes is Multiple Activities Fo aoe One Individual used This allows you to track different types of activities for a single staff member Type or look up the Default Activity Code codes for the activity Activity Description is automatically filled in with the description associated with the activity code The values you select will be added to each participant s activity record You can modify individual member detail records or change this value after adding participants Type or look up the Station Shift and Unit codes for staff member s to be added to the activity If most staff s
134. e state level validation including relaxed address validation cities and streets are not required to be in lookups in incidents Not recommended unless you are an incident collection agency Check Allow incomplete reports to be saved to allow incident reports to be saved without being completed Departments that do not complete incident reports at the time of entry select this option When the incident is saved a list of incomplete items is displayed and if none of the items are critical pressing Ignore All saves the incident FH checks for incomplete status when printing reports or exporting reports to state Specify Numbering Reports Select YY to add the year from the incident date Select to disable the initial two optional characters in the incident number Specify Auto Numbering Method Select Calendar Year to use the calendar year for the two digits inserted into the incident number Select Fiscal Year to use the fiscal year for the two digits inserted into the incident number Select None to disable automatic numbering Departments that do not wish to use the first 2 digits of the 7 digit incident number use this option Press OK To Specify General Incident Resource Units amp Personnel Requirements Select the Administration menu Administrative Options option Click the Incident tab All Incidents tab Resources Units amp Personnel tab Check Requ
135. eads Involvements The investigation should include a record for each involvement or suspect To Add a Lead or Involvement From the File menu select the Incident Investigations option Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query form is displayed select the record to modify and press OK Click the Leads Involvements tab Press Add The Leads Involvements form is displayed Type the suspect or involvements Last Name Enter the Date of Birth or Age of the subject Make an approximation if the age cannot be determined If the age is less than 18 Juvenile Disposition is required Press Add from Occupancy if the investigation was at an occupancy record and the contact is an investigative lead Press Add from Involvement if the investigation is linked to an incident record with involvement records A lead involvement record should be added for each lead involvement Press Save and New to add an additional record Save and close lead involvement when finished Save and close the investigation record 0000 About Scene Information When linked to an incident the scene information is added from the incident record and can not be modified You should add scene information if the investigation is not linked to an incident To Add Scene Information From the File menu select the Incident Investigations option Ifthe Investig
136. ecify Date Format not available if you are using Windows date format If available select how dates are displayed throughout the system MM DD YYYY will display April 1 2004 as 04 01 2004 DD MM YYYY will display April 1 2004 as 01 04 2004 YYYY MM DD will display April 1 2004 as 2004 04 01 o Select the Date Delimiter character used to divide date in the system Select from three options or Check Auto format phone numbers to format phone numbers as H H H H for ensuring consistency among phone numbers International users should disable this option if they do not use the phone number format Phone Format Press OK To Specify Network amp Multi User Options Select the Administration menu Administrative Options option Click the General tab Check Attempt login from network identity to automatically log into FH using your network identity An FH login matching the network login must exist This feature does not work on all network types Check Allow individual user preferences to allow individual users to have their own unique desktop settings When enabled each user can define the settings normally specified from the Workstation Options form General section User preferences when enabled are accessed from the Tools menu User Preferences option Specifying Administrative Options 4l 42 See To Specify Startup Option
137. ecords When a staff member is associated with a specific login record the audit information in FH that reports specific actions performed by specific login records can be related to a specific staff member Typically staff is associated with a specific user login record when the login record is created and you can review the login groups and add links to specific login records as needed For more information on adding login records see About Users on page 67 To Review Add Staff Links to Login Records From the File menu select the Staff Members option Ifthe Staff form is displayed press Browse or Ctrl O highlight a record then press OK Ifthe Query form is displayed highlight a record then press OK Click the Additional Records tab Press User Setup To add a new user login record press New To display the current linked login records highlight the item then press Open To add a new link press Add Link select a login record to associate with the staff record then press OK To remove an existing link highlight the item then press Remove Link Press Close Hiding Staff Members Staff records should not be deleted since this will invalidate all the activities training and other records the staff member participated in As an alternative to deleting a staff record you can mark the staff record as hidden This will remove the staff from browse lists used to add staff to act
138. ecords before adding a new record to display records with matching values when a value entered in the key field of a new record matches the corresponding value of an existing record Adds an additional step to record creation when entering records that share key values but may prevent accidentally entering the same information twice Check Confirm master record deletion by typing Yes to prompt users before deleting master records Adds an additional step to record deletion but may minimize accidental master record deletion Check Hide the Delete button from the bottom of data entry forms to remove the Delete button from master record data entry forms Records can still be deleted from the Form menu Check Hide the Delete button from linked record lists to remove the Delete button from master record data entry forms where linked records are listed To delete a linked record open the linked record and press Delete Check Automatically save the current record every and specify the interval in minutes Records with required elements missing are not saved Press OK About Tab amp Field Coloring Specify the colors used for data entry form tabs and fields FH data entry forms are color coded to indicate required complete and incomplete data elements To Specify Tab amp Field Coloring Select the Tools menu Workstation Options option Click the General tab Tab amp Field Coloring tab Works
139. ed by pressing and a listed unit can be removed by highlighting the unit and pressing Use the record navigation buttons at the bottom of the form to navigate to the next record Change values as needed Press Apply to All check the fields with values that should be applied to all units then press OK Save and close To Add Staff Activities Staff added from responding units are listed here You can Modify Individual add additional staff if necessary To add activities for Staff incident related activities that are not specifically incident response activities should be added from the NFIRS Incident Report form Additional Reports section Staff Activities button Incident related activities that are nor incident response related are not displayed in the Units amp Personnel section From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option About EMS Incidents 193 Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click Units amp Personnel tab Press Add to add a single staff member to the activity The Participant Detail form is displayed You can also add multiple staff at one time using the Add Group button More information on adding groups is listed on page 88 A single participant can
140. efault the assignment field to the member s unit code to add the staff member s unit to the Assignment field from the staff member s responding personnel record if available or the staff member s record of the authorization record Specifying Administrative Options 49 50 Check Automatically Lock Incident Reports to restrict future incident report modifications using one of the options below Otherwise all users with Modify rights for the report can make changes Departments that want to increase security on incident report entry use this option Related staff activities are not locked Check Allow only the user who entered the report to restrict future incident report modifications to the person who initially entered the report or to administrators Check Disallow changes after quality control check authorization has been entered to lock incident reports after a report authorization record for quality control OC is entered Check Disallow changes and set the number of hours following incident completion before the incident is locked Check Lock Units amp Personnel data entry if the incident report is locked to lock unit and personnel response detail records related to an incident that is locked When disabled unit and personnel detail records for a locked incident can be modified by non administrative users Check Unit information comes from CAD to prevent non administrative users from adding
141. em since it is more difficult to change your codes after you have started to enter records Work the codes out on paper before using them in the system Your codes should be completely set up before any operational data is added Once you have added the codes access for modifying codes should be restricted Codes can be added to and edited at any time If the code has been used you will not be able to delete it unless you remove the code from each record or merge the code you wish to delete with another code The more planning you put into codes the more likely the codes will save time during data entry Be sure to look at the codes in the DemoData to familiarize yourself with general code schemes Codes are displayed alphabetically or numerically meaning that a code of 1 is displayed before 2 and A is displayed before B Keep the following in mind e Keep codes the same number of characters to ensure predictable sorting For example if you use 1 through 99 for a specific code pad the 1 character wide codes with zeros to the left for example change 1 to 01 e All codes in each category must be unique regardless of whether they are grouped or not e Keep special use codes together so they are displayed together The last point is often overlooked when setting up codes If related codes are displayed together users are more likely to select the correct code Note that when multi select is availab
142. en modules Entering records in a specific order can help save time when all modules are installed Add Base Staff Member Add Base Apparatus Add Base Occupancy Fire and EMS Incidents Staff member records are used in responding personnel member making report and quality control checks Apparatus is used for responding units and equipment usage records When an incident occurs at an occupancy address information and building structure information from the occupancy record is used Hydrant records can be associated with Occupancy records Vendor records and non Incident equipment usage records use Apparatus records Non incident staff activities training classes and training programs use Staff Member records If your version does not include records listed above and you wish to add the capability of tracking these records contact your sales representative listed in the inside cover of this guide for more information and pricing for additional modules How Information is Stored Information you add to FH is stored in records A record is a collection of fields that is uniquely identified by a key field For example a staff record includes at a minimum the following fields Staff ID Key field that uniquely identifies the record First Name Staff member s first name Last Name Staff member s last name Status Status code for the member The Staff ID is the key field that uniquely identifies specif
143. ence Address Street Miles to Station 1040 8th Ave 7 00 Rank ani State ZIP Code m fer e E Elki Altemate ID Station Shit Unit Effective Date Effective Date fee pe Je amns Date of Birth r Published Phone Numbers C C 77a E Summary Current Age 31 Years Service 42 Adjusted Hire Date Career Volunteer E Mail Internet Addresses Type 2 Phone Number Extension E HOME H 412 388 4455 Address ch Andecob ms net 43 The valid values are the lookup codes you have defined for the category There are two elements that make up a basic lookup code e Code The code is from 1 to 25 characters long and identifies a e Description The description is a detailed description of what the Some lookups include additional elements that can be defined When the lookups with additional elements are used in a record the additional elements are automatically inserted into the fields that Each department sets up lookup codes differently depending on how they use the system Some departments will not use all available Setting up the codes your department will use is a crucial setup task The codes you enter will potentially save you time but proper planning is essential Once codes are set up we recommend controlling access to lookup codes via 14 4 bj New Open Save Delete Print Close specific code
144. enu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option O O If the EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK If the Query form is displayed you are ready to select an incident then press OK Click Units amp Personnel tab Press Add If you use station roster amp availability or the optional staff scheduling module select the available unit as entered in the station roster or via staff scheduling or if the unit to add is not listed select Unit Lookup and Type or look up the Unit Response Detail form Unit Code value If you do not use station roster amp availability or the optional staff scheduling module the Unit Response Detail form is displayed Type or look up the Unit Code Complete Unit Response Detail form values The Resource Type code is usually associated with the Unit Required for all incidents Type or look up the Response Code that best describes the nature of the unit s response Check appropriate Fire Medical Rescue Other types to indicate the main use of this apparatus at the incident The main use at the incident need not be the consistent with the apparatus type For example EMS may be the principal use of the members arriving on scene in a ladder truck Required for all incidents Complete Times The incident record s Alarm Date is associated wit
145. epartment enter the incident number assigned to the incident by that department Save and close mutual aid record The Aid Given or Received list is displayed Press Close to return to the EMS Search amp Rescue Report form Save and close EMS record To Add Multiple Responding Units From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option About EMS Incidents 189 190 O O Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click Units amp Personnel tab Press Add Group Ifyou use station roster amp availability or the optional staff scheduling module select All units for lt station gt as entered in the station roster or via staff scheduling or select Unit code lookup and select the units to add then press OK Ifyou do not use station roster amp availability or the optional staff scheduling module the Lookup Units form is displayed Select units to add then press OK Press Unit Incident Actions Taken to add codes for additional actions taken Press OK to close Complete Unit Group Add form Basic section values These values are applied to all responding unit detail records Type or look up the Response Code that best describes the nature of the unit s res
146. ers 66 To Assign Custom Queries Reports Graphs Maps Categories Security 67 To Disable User Login 67 To Enable Disabled User Login 67 To Require User Password Change 67 Specifying Groups 68 To Add New Group 68 To Assign User to Existing Group 68 Reviewing User Activity 68 To Review Log of User Accesses 68 To Review Current User Information 69 Concepts Section Getting Around in Forms 72 Understanding Record Entry Order 73 How Information is Stored 73 Selecting and Browsing Records 75 To Open Multiple Records 75 Staff Activity amp Training Section Staff Records 78 To Add New Staff Record 78 About Staff Contacts 79 To Add Staff Contact to Staff Record 79 About Staff History Records 80 To Add Staff History Records 80 About Staff Equipment Records 80 To Add Staff Equipment to Staff Record 80 About Staff Availability Records 81 To Add Staff Availability 82 About Staff Administrative Information 82 To Add Staff Administrative Information 82 Associating Users With Login Records 84 To Review Add Staff Links to Login Records 84 Contents Hiding Staff Members 84 To Lock Record 108 To Hide This Staff Member 84 To Review Record Modification History 108 Assigning Staff Member Instructor Codes 85 To Assign Staff Member Instructor s Code 85 Occupancy Management Section Adding Occupancy Records 110 Completing User Fields and Attaching Files 85 Creating Oeeapaney Records 110 To Complete Staff User Fields 85 To Attach File to Sta
147. ess Proc to save and add a procedure Press Med to save and add a medication Press Save to add the record to the Assessments and Treatments list To leave without adding record press Cancel Press Close Save and close patient record oo 0 6 Add Patient Medication 0000 From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Assessments amp Treatments tab Press Add Medication EMS Search amp Rescue Incident Reporting O OO 000 To 0000 0000 Time is automatically filled in based on the Arrived Scene time plus any time added for vital procedure medication records Change if necessary Change if necessary Type or look up the Medication Code Note that a default fee can be associated with the Medication Codes lookup code Complete additional information as needed Track consumable items used for the procedure in the Usage section To add additional detail records set the Auto Increment Value and check Use Auto Increment to automatically complete detail times or uncheck Use Auto Increment to leave the detail time incomplete and Press Rp
148. etail form is displayed Type or look up the staff member to add to the staff activity in Staff ID Other values in this form are brought in from the Staff Activity form when available Fields can be modified as necessary Press New to add an additional participant detail or save and close detail record To add multiple staff to an activity at a time press Add Group Staff members available to add to the staff activity are displayed in the left Listed staff member records are not modified in any way from the Staff Group Select form NOTICE Specify which section to display in the Administrative Options form Staff section The Staff Master section is the Specify Group Select Method default section Ifthe Staff Group Select form Staff Master section is displayed 88 Staff Activity amp Training e Add specific Status FDID Station Shift Unit values When the value is included in the staff member record the staff member is listed unless the staff member record is designated as hidden By default the staff member is included in the list if the corresponding field in the staff member s record is blank o If you have a saved set of criteria select the set from the Restore from Saved Criteria drop down field and the values for each field saved with the set are applied Save Status FDID Station Shift and Unit field values as a set by pressing Save Criteria As When you wish to modify the set change the value
149. etail record time Uncheck Use Auto Increment to leave the detail record time blank You can specify the interval to add before vital procedure medication records via the Administrative Options form EMS Search amp Rescue section Assessments amp Treatments section Press Add Vitals Ax Patient vitals and assessment fields are displayed Time is automatically filled in based on the Arrived Scene time plus any time added for vital procedure medication records Change if necessary Complete information in the Basic Observation Notes and Other sections as needed To add additional detail records set the Auto Increment Value and check Use Auto Increment to automatically complete detail times or uncheck Use Auto Increment to leave the detail time incomplete and Press Rplcat to save and add another record Press Vital to save and add an additional vital assessment Press Proc to save and add a procedure Press Med to save and add a medication Press Save to add the record to the Assessments and Treatments list To leave without adding record press Cancel Press Close Save and close patient record oo 0 8 Add Patient Procedure 0O00 From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifth
150. f the materials It is illegal to remove or obscure proprietary notices It is illegal to duplicate and distribute the Software by any other means including electronic transmission To protect trade secrets contained in the Software you may not decompile reverse engineer dissemble or otherwise reduce the Software to human perceivable form You may not modify adapt translate rent lease or create derivative works based upon the Software or any part thereof Warranty ACS warrants the original diskettes and CDs are free from defects in material and workmanship assuming normal use for ninety 90 days from the date of purchase Except for the express warranty of the original CDs and diskettes set forth above ACS grants no other warranties express or implied by statute or otherwise regarding the CDs and diskettes and related materials their fitness for any purpose their quality their merchantability or otherwise The liability of ACS FIREHOUSE Solutions under the warranty set forth above shall be limited to the amount paid by the customer for the product In no event shall ACS be liable for any special consequential or other damages for breach of warranty Manuals and 2008 ACS Printed in the United States All rights reserved No part of this work Documentation covered by copyright hereon may be reproduced in any form or by any means graphic electronic or mechanical including photocopying recording taping or storage
151. ff Record 85 a Add New Occupancy Record SIR About Staff Locking and Modification History 86 Merging Ocoupancy Records Ha To Change Record Lock Status 86 as en oe e T To Review Record Modification History 86 ee ge ae o About Building Information 113 Understanding Staff Activity Records 87 To Add Building Information 113 ff Activiti 7 o Rouvanes n j About Owners and Contacts 114 To Add a New Staff Activity Record 87 ToAdd Owners eContacts 114 Understanding Training Classes 91 About Occupancy Inspections 114 Guidelines for Adding Training Classes 91 To Add Inspections amp Activities 114 To Add Training Class 92 To Batch Schedule Inspections Using Filter Understanding Training Program Records 94 ea sae ae dule Tnsp ctions Using Ls Setting Up Training Programs 94 Occupancy Query 116 To Add New Training Program 94 To Add Edit Violations 117 Renewing Expired Certifications 96 o Violation Using the Inspection Checklist To Renew an Expired Certification 96 d To Renew Multiple Expired Certifications 96 A ae see Party ae To Add Inspection Linked Permits 119 eet ante tema eee eer About Occupancy Chemical Inventories 120 Understanding Inventory Records 98 ToAdd Chemicals 120 Creating New Inventory Records 98 About Proximate Hydrants 120 To Add Master Inventory Record 38 To Associate Nearby Hydrants with Occupancy About Generic Equipment 100 120 To Add Generic Inventory Record 100 About Storage Tanks 121 To Link Generic Equipment to Inventory To Add
152. fied value includes all available records that is all possible records are included Parameters You generally will not need to modify the parameters Check Not to include records that do not have the value specified in the Value field Lookup values if available can be displayed by pressing in the field Check Case to ignore capitalization of the parameter value Specify And or Or in Logical And is most common Or will result in values if either parameter values is present And will exclude values if either parameter value is not present In some instances you can lookup the Value If the Add button is accessible you can press Add to add additional parameters If the Having section is accessible you can add additional parameters The difference between the Filter and Having section is the Filter section filters out data before it is included in the results table The Having section filters out data that is included in the results table Press Run Query to run the report and all records that match the specified criteria are displayed To Run a Query From the Tools menu select the Queries option The Queries form is displayed Highlight a query then press Run Ifthe report includes filters the Query Parameters form is displayed Enter parameter values then press Run Query You can output queries to a printer or external file format or copy the query results to the Windows clipbo
153. ganized in a series as shown below Series Heading 100 Fires 200 Overpressure Rupture Explosion Overheat no ensuing fire 300 Rescue amp Emergency Medical Services EMS 400 Hazardous Conditions No Fire 500 Service Calls 600 Good Intent Calls 700 False Alarm amp False Calls 800 Severe Weather amp Natural Disasters 900 Other Type of Incidents In general use the lowest numbered series that applies to the incident You will have an opportunity to describe multiple actions taken later in the report Complete Times area fields Dates for each completed time field default to the Alarm Date value and can be modified by pressing the lookup button to the right of the time field Type the time the dispatch center was notified for Dispatch Notif Leave empty if not used Type the First Arv Scene time Arrival time should be the same as Last Clr Scene if cancelled on the way to a call If Alarm Time is before midnight and the First Arv Scene is after midnight press the First Arv Scene lookup and select the correct date Required for all incidents Adding NFIRS 5 0 Incident Reports 139 140 o O O O Leave Controlled time blank except for fires For fires enter the date and time that the fire was determined by the incident commander to be under control If Alarm Time is before midnight and Controlled is after midnight press the Controlled lookup and select the correct date Required for wildland fire
154. ge details When multiple equipment is added equipment usage details are applied to all equipment usage records Add quantity and cost information if applicable 0O00 Adding NFIRS 5 0 Incident Reports 165 166 See Tracking Quantity and Cost on page 105 for more information Click the Notes tab and add equipment usage notes if applicable Save and close the Usage Purchasing Detail form Press Close About Dollar amp Loss Value Reports Estimated dollar loss is required for all fires where the value is known To Add Dollar Loss amp Value Report From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Additional Reports tab Press Dollar Loss amp Value to display the Loss amp Value Report If you are prompted select Buildings or Vehicles and press OK The Loss amp Value Report form is displayed Values entered in the Response section are displayed and you can add additional insured amount and settlement amounts as well as vehicle value information and insurance company information About Arson Investigation Reports The optional Investigation Report may be used whenever the Cause of Ignition is intentional or under investigation without any
155. gning security based on the individual and their responsibilities is the best way of minimizing security breaches When you tailor specific users access to the areas and features they need to perform their tasks within FH you reduce the number of things they can do wrong intentionally or unintentionally Another issue to consider is the ability to track specific user activity within FH When a specific user is logged in that user name is tied to record entries or modifications If a Staff ID is associated with the user setup the staff member s name can be associated with the user name If questions arise about a specific record you can access record entry information and determine who created the record and who last modified the record If user names are shared by multiple users there is no way to determine who actually created or modified the record We recommend setting up a login name and password for each user The password should be limited to 10 characters or less You can limit their usage level by designing the security based on the individual Any other approach potentially disables the built in record modification tracking and or permits security breaches 6l 62 Specifying User Security FIREHOUSE Software includes a default user with the highest security access User Name GUEST Password DEMO When you add your own administrative users consider disabling the default GUEST user since it is a potential security breach
156. h amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Other tab Press Display Report Completion Status to display validation results for the report including a listing of incomplete items if incomplete Press OK Save and close About EMS Incidents 209 Chapter 13 Dispatch Remote Station Incident Reporting There are two separate types of records added to Dispatch Remote Station Incident Reporting Dispatch reports are abbreviated NFIRS or EMS incidents Remote Station Incidents are responding units and personnel information entered at an outlying station to be merged with an incident added at a central station using import export 211 Adding Dispatch or Remote Station Report Dispatch reports are abbreviated NFIRS or EMS incidents that are useful for initiating a basic report that can be completed later Remote station incident response records allow responding unit and personnel records to be added from a remote location where the incident record has not been added then the unit and personnel response records are merged to the incident using the Import Export feature Adding Dispatch Reports When incident reports are added as dispatch reports information is entered the incident is marked as finished and incident data is transferred to the NFIRS or EMS area and at the
157. h workstation options and wish to return to the original workstation option configuration you can do so To Reset Workstation Options Back to Default Select the Tools menu Workstation Options option Workstation Options Click the General tab Startup amp Navigation tab Press Reset Default All workstation options are returned to the original settings Press OK Workstation Option Management Workstation options can be applied to specified workstations from a central location This allows an administrator to set workstation settings for networked workstations without physically accessing the Workstation Options form at each workstation The workstation options can be applied to all workstations on the network or only specific workstations To Apply Workstation Options to Selected Workstations Select the Tools menu Workstation Options option File Locations and Caching and Remote Access Configuration should not be set from the server Paths are local at the server location so applying the local paths to network workstations would result in invalid paths Server Note Make changes to the Workstation Options form General Local Data amp Files Remote Data Mapping Pocket PC Scheduling Other section and modify the toolbar The settings you select will be applied to workstations specified in a later step Press Apply to All The Workstation Settings Deployment Wizard is displayed Check each a
158. h each completed time field by default press the time field s lookup button to change the date Check Cancelled and type the date and time the unit was canceled if relevant Press Response Time Analysis to review elapsed times between completed date and time fields Press OK to close Press Unit Actions Taken to add codes for additional actions taken Press Save to close Click the Personnel tab You can add staff one at a time by pressing Add and the Add Individual Participant Detail form is displayed Staff Press Add Group o Ifyou want to select the staff using the staff group select method select Staff Group Select The Staff Group Select form is displayed Select staff members responding to the incident then press OK About EMS Incidents 191 o If you want to add staff added to the unit from the optional staff scheduling select Add From Scheduling In certain circumstances a unit will respond that has no Add Additional staff assigned to it in FH Staff Scheduling the staff are Staff Activities assigned to another unit and respond on the other unit in certain circumstances For example if all staff are assigned to unit A but unit B responds in limited circumstances and unit B responds adding the unit via Add from Scheduling will result in no personnel In this instance the person entering the incident can add the unit from scheduling then from the Personnel se
159. hare a particular station shift or unit use these fields These fields can be left empty The values you add to the Hours Worked fields in this section are added to each staff member record added The values you add to the Credits Points fields in this section are added to each staff member record added The values you add to the Hours Paid fields in this section are added to each staff member record added Type or look up a Pay Scale code to apply to each staff member added to the activity When a pay scale code is included the dollar amount associated with the pay scale code will be credited to the staff member and hours paid times the staff member s default hourly rate will be ignored Additional pay options are available o Check Credit Both to calculate pay by multiplying hours paid by the staff member s default hourly rate plus the amount associated with the pay scale code NFIRS Incident Reporting o Check Scale Hr Rate to use the amount associated with the pay scale code and multiply it by hours paid staff member s default hourly rate is ignored Press Add to add a single staff member to the activity The Participant Detail form is displayed Press Add Group to add multiple staff member s to the activity The Staff Group Select form is displayed Select staff members then press OK to add selected staff members to the activity record The Staff Activity Group Add form is displayed More i
160. he Fire Service Casualty Module NFIRS 5 are required when there are casualties associated with a fire incident The Fire Service Casualty Module should also be completed when there are fire service casualties at all other incident types as well NFIRS Incident Reporting Optional modules include the EMS hazmat Wildland Fire Apparatus and Personnel and Arson Modules The type of incident reported or the nature of a particular incident such as the release of hazardous materials at a fire after the arrival of the fire department may trigger one or more of these additional modules if your fire department is using these options The amount of information needed in each module varies based on the type of incident associated casualties and property losses Standard Lookup Code Entries There are a few conventions for entering lookup codes that will assist you in reporting The letter N NN or NNN is used to Keyboard Shortcuts are available indicate None in a field that is normally ye lb odkup Arven fields i pe Unknown Undetermined coded If the field is a numeric field such as p Not Applicable dollar loss 0 zero is used to indicate none p7 None F8 Not Assessed e The letter U UU or UUU is usedto F9 Not Classified indicate Unknown or Undetermined in a field that is normally coded The coded field should not be left blank as that is an indication that the person completi
161. he Occupancy Management option Multi Occupancy Properties option Ifthe Multi Occupancy Property form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Highlight occupancy to remove from multi occupancy property record then press Remove Link The occupancy is removed from the multi occupancy property record but not deleted Press Close when finished To Review All Contacts Preplans and Responses From the File menu select the Occupancy Management option Multi Occupancy Properties option Ifthe Multi Occupancy Property form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Press the All Contacts All Preplan or All Incident Responses tabs to review contact preplan or response information Press Close when finished Adding Occupancy Records 131 Chapter 10 NFIRS Incident Reporting FH performs extensive validation throughout the incident report entry Below are descriptions of each required and optional data element There are some conventions used in this chapter to highlight important information 133 134 Understanding NFIRS 5 0 Incident Reports The NFIRS 5 0 incident report is made up of a collection of sections NFIRS calls these modules that g
162. he codes are copied to the specified path and file name To Install Lookup Codes from an Installable FH File You will need to move the file you created to a location that can be accessed by the workstation you are installing the codes at From the Administration menu select the Install New or Updated Components option Press Install From then select the path and file name you want to install the codes from press Open then OK A list of lookup categories available for installation and additional items if included is displayed Tag the lookup categories you wish to install Select the install method Select Merge new or updated components with existing components to add the code to your existing codes without deleting your current codes Select Replace existing components with new or updated components to completely erase your current codes when installing lookup codes If you install codes and select Replace existing components with new or updated components overwritten codes will remain in records they were entered in resulting in records containing invalid data Press OK to add the lookup codes or Cancel to exit without installing the lookup codes O O Importing Lookup Codes If you have data that will be used in lookup codes available in ASCII or DBF format you can import this information directly into FH without manually entering it Most applications can export to ASCII or DBF formats DBF is
163. he incident To Complete Aid Given Received Details O From the File menu select the NFIRS Incident Reporting option NFIRS Incident Reports option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click Units amp Personnel tab Press Aid Given Received Details to display a listing of mutual aid given or received Press Add or Add Group The Aid Given or Received Detail form is displayed NFIRS Incident Reporting Type or lookup the Department Unit Code for the department or unit that either provided or received mutual aid Note that additional data elements required for mutual aid given or received departments are added as part of the Department Unit Code lookup setup Complete Response Times area fields The date associated with each completed time field defaults to the Alarm Date value and can be modified by pressing the lookup button to the right of the time field Complete Resources area fields If you give aid you may choose to report your own resources Similarly if you receive aid you may choose whether to count only your own resources or those of the aid giving department as well The aid receiving department should always report all casualties other than the fire service casualties of the aid giving department Each department reports its own fire
164. hen press Supplemental History The Supplemental History form lists occupancy notes and briefs details When records have been merged from an occupancy to the current occupancy a MERGEFROM Code record is listed A summary of the information added by the merge is included in the notes and briefs detail Notes When records have been merged to another occupancy from the current occupancy a MERGETO Code record is listed Highlight notes and briefs detail record Optionally press Referenced Occupancy to display the occupancy that was merged to or merged from then press Close Press Open Press Close when finished About Building Information Occupancy building information includes vital specifications about the building like property use detector information and automatic extinguishers and information used to calculate needed fire flow To Add Building Information O O O From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Building tab Specific Property Use is the only required field but other fields in this section are used in incident reports when there are certain types of fire at the occupancy NFIRS incident reports can include building i
165. ials storage tanks from other occupancies with the same Property ID value are accessible from the Additional Records section Close occupancy when finished About User Fields and Attachments You can complete user fields if they have been defined for occupancy records and attach files To Complete User Fields From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Other tab Press User Fields Complete fields as needed then save and close Instructions for adding user defined fields are available in the Advanced Feature Reference User Defined Fields chapter Save and close occupancy To Attach Files and or Signatures From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Other tab Press Attachments Add attachments then save and close Press F1 for additional information on using this form About Locking and Modification Occupancy records can be locked from modification by non administrative users
166. ic staff members Understanding Record Entry Order 73 74 Required Fields Concepts There are many different types of records in FH All records have a set of fields that must have values for the record to be saved When records are added the required fields must be completed or you are prompted to add the missing information By default these required fields are color coded to indicate their requirement and completion status Selecting and Browsing Records You select the records you wish to make available for browsing then open the first record in the list The browse buttons at the bottom of the form are inactive when only one record is opened To Open Multiple Records To open multiple records for browsing complete the following steps using Fire Incidents as an example Press Depending on Administrative Options the Incident Report form or the Query form is displayed If the Incident Report form is displayed press Browse To select two records next to one another position the cursor over the first record then press the left mouse button highlight press and hold the Shift key then highlight the second record All records between the first and second highlighted record are selected Release the Shift key then press OK The first record is opened and other selected records can be displayed using the navigation buttons at the bottom of the form To select multiple records that are not next
167. ident Reporting Type or look up a Specific Use code to indicate the property use where the incident occurred Use code 419 for mobile homes that are used primarily as fixed residences If the mobile home is in transit use the code describing the property where the mobile home is located at the time of the incident If the property use code falls in the 500 600 700 or 800 series On Site Materials or Products are required in the Fire Report if the incident is a fire See Add Fire Report in this chapter on page 153 Type or lookup the Incident Type code for the actual situation that emergency personnel found on the scene when they arrived These codes include the entire spectrum of incidents the fire department responds to from fires to EMS to public service The incident type reported here is not always the same as the incident type initially dispatched Incident Type identifies the various types of incidents to which the fire department responds and allows the fire department to document the full range of incidents it handles This information can be used to analyze the frequency of different types of incidents provide insight on fire and other incident problems and identify training needs Generally select the type of incident found when emergency personnel arrived at the scene but if a more serious condition developed after the fire department arrival on the scene that incident type should be reported The codes are or
168. ident Requirements Select the Administration menu Administrative Options option Click the Incident tab All Incidents tab General tab Check Require narratives for all incidents to make narratives required to complete incidents Check Require 911 used code to make 911 Used Code required to complete incidents Check Require a numbered or intersection address to require a Street Address or Intersection address Type value in the Scene Address area for incident reports When checked Rural Directions and National Grid address Type values are not allowed Check If both a NFIRS and EMS report exists prompt to keep shared data elements synchronized to prompt to synchronize shared NFIRS or EMS record data when saving a NFIRS or EMS incident record Check Allow scene address data to be changed even if Occupancy ID is used to allow occupancy information to be overwritten while entering incident reports Departments that wish to update occupancy records as they are entering incident information that is using address information entered for the incident select this option You are prompted before any information is overwritten Specifying Administrative Options 47 48 Check Do not search for an Occupancy ID matching the scene address to disable the prompt displayed when entering an incident record with the same address as an occupancy record Check Use state level validation rules to us
169. ields are added to each staff member record added for the activity If necessary you can edit the values for specific participant detail records Type or look up the Station Shift Unit of staff members added to the activity If most staff share a particular station shift or unit use these fields These fields can be left empty Type the Hours Worked for staff members added to the activity can be different than hours paid Type the Credit Points to add to each staff member record added for the activity If necessary you can edit the values for specific participant detail records Type the CEU continuing education units assigned for attending the training class Staff Activity amp Training Check Attendance Required if attendees are required to attend the training class Select any combination of Fire Rescue Medical Other depending on the type s that best describe the activity Add Payroll Calculation area information See the FH Help File Pay topic for additional information on payroll calculations Add at least one participant to the training class To add one staff member o Press Add The Attendee Detail form is displayed o Type or look up the staff member to add to the staff activity in Staff ID Other values in this form are brought in from the Training Class form when available Fields can be modified as necessary o Press New to add an additional participant detail or save a
170. ining Detail records who actually attended If Training Required is not checked only enter the staff members that attended the training Add a training record for each topic covered in a training session Use Memorize Templates to copy the training record including staff members attending and Recall Templates to create a new training record with the memorized staff members to simplify the process of entering multiple training records for a training session To Add Training Class Ooo 800 O From the File menu select the Training Classes option Ifthe Training Class form with the last modified record is opened press New or Ctrl N to adda new record Ifa blank Training Class form is opened you are ready to enter a new record Ifthe Query form is displayed press Cancel to add a new record Current system date is included in Start Date Enter the date the class will be conducted You can enter a historic date a future date or keep today s date automatically inserted Type or look up a Category The description associated with the selected training category is inserted into Class Description Change the Class Description if necessary Type or look up the Agency providing the training Type a Dept Course Number for example catalog numbers or other IDs assigned to the particular training class Press Instructors to add all instructors teaching the class The values you add to the Default Values area f
171. ion then select the EMS Search amp Rescue subsection Code Set section then press Active EMS Code Set Carefully consider what code set works best for you Changing code sets after EMS reports are entered will result in incomplete EMS reports 185 About EMS Incidents When a new EMS incident is displayed in the EMS Search amp Rescue Incident Report form the included values and required fields vary depending on whether the EMS incident was initiated from a NFIRS incident report on the installed EMS code set and on the system rules and default values set up for your system As you complete the EMS incident additional information may be required based on the value you enter Adding Basic EMS Incident EMS incidents are often started from a fire incident Incident form Additional Reports section EMS Search Rescue button When an EMS report is initiated from the Incident form relevant information from the fire incident report is transferred to the EMS incident To Add Basic EMS Incident Data From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press New or Ctrl N Ifthe Query form is displayed press Cancel Values automatically entered in EMS Service and FDID are associated with the central station indicated on the Workstation Options form General section Startup amp Navigation section
172. ion and Browsing 75 renew expired certifications 96 Report Shortcuts 222 Requirements Set General 41 Response Codes 2 Review inventory associated with occupancy 125 Right mouse button 72 Run a Report 222 223 Using Query Parameters 223 S Screen Navigation 72 select multiple records that are not next to one another 75 select two records next to one another 75 Set Spell Check Options 225 Add Replacement Text 225 Setup Lookup Tables 5 6 8 10 12 14 16 18 20 22 24 Security 61 62 64 66 68 Shifts 15 Spell check 166 Staff Activity Form 87 Staff Activity locked 58 Station 15 Station Shift value locked 58 Storage Tanks 120 System Settings See Administrative Options Index 3 Index System Wide Codes 5 T Townships I5 Training Class form 92 Training Program form 94 Types of incidents 137 Series 137 Units 15 User Login History 44 User Name 62 User Preferences 41 Using Query Parameters 223 V View an attached file 214 W Workstation Options 27 Workstation Options Form Sections 27 Index 4
173. ions Address information is required by state and local governments to establish a legal report reference If the incident is a Wildland fire Rural Directions should be selected and you can check Address on Wildland Report to use the address entered on the Wildland report Type or look up the City State ZIP where the incident occurred the three fields are part of a single lookup If the incident occurred in an unincorporated area use the city found in the mailing address for the incident location These fields complete the full address of the incident and provides a means of linking fire incident data to other geographic and population factors for comparative analysis at the local and regional levels Check NFIRS Incident Report if this incident is a NFIRS incident report Check EMS Search amp Rescue Incident Report if this incident is an EMS Search amp Rescue incident report Optionally click Units amp Personnel and add responding units and personnel Optionally click Patients Victims and add patients Available only if EMS Search amp Rescue is selected See To Add Basic Patient Information on page 192 for detailed instructions Click the Narrative Finish tab Check Append this narrative to existing narrative for this incident report on import to add the narrative to the end of any existing incident narrative when it is exported imported to the central station for remote station responses Save a
174. iple staff by pressing Ctrl while selecting A staff member is selected when the name is highlighted Press OK to add selected staff to the activity Ifthe Staff Group Select form Station Roster section is displayed o Select the Station Shift Unit and corresponding staff are listed Understanding Staff Activity Records 89 o Select staff to add to activity Select multiple staff by pressing Ctrl while selecting A staff member is selected when the name is highlighted Press OK to add selected staff to the activity Ifthe Staff Group Select form Saved Group section is displayed o Select group and corresponding staff are listed Select staff to add to activity Select multiple staff by pressing Ctrl while selecting A staff member is selected when the name is highlighted Press OK to add selected staff to the activity Change activity details on the Staff Activity Group Add form as necessary Press OK to add participant details for selected staff members with the values you specify Complete remaining fields as necessary Public education and public service information can be added to the Public Education Service tab Notes about the staff activity can be added to the Notes section Add user fields attach files complete casualty reports and add equipment used as needed to the Other tab A summary of attending staff is listed in the Staff Summary tab Save and close staff record when finished
175. ire Resource detail units and personnel to require units personnel to complete an incident record Select which resources to require Check Require units to require unit response detail records Check Require personnel to require participant detail records Check Require personnel info for each unit to require that each unit response detail record includes participant detail records Check Require detail if aid given or received to require an aid given aid received detail when mutual aid given or received is indicated in an incident report Administrative Options Check Require equipment usage detail to require equipment usage details to complete incident reports Equipment usage records for equipment records that have a unit associated with it are required Additional usage records for other equipment used at the scene are optional Check Default times from previous entries for units and aid given received detail records to default times into new unit and mutual aid records Check Default actions taken for unit records to add actions taken from the first unit response detail record to additional unit response detail records Check Default Fire Medical Rescue checkboxes in unit personnel response based on incident type to select the type Check Automatically calculate last unit cleared scene time on main To O report from unit entry to complete the Last Clr Scene date and time on the NFIRS Incident
176. is field allows multiple occupancies to be associated with a single property Use Property ID to associate occupancies together when they are on the same property or under the same roof Multi Occupancy pa Records Examples include separate apartment buildings in a complex strip malls schools and manufacturing facilities See To Add Multi Occupancy Property Records for the steps to add these Occupancy Management O Enter the occupancy address information into the address fields Type the Parcel ID assigned for the occupancy If your area does not use parcel IDs you can use this field Parcel IDs to track other numbers assigned to specific occupancies for example box numbers You can enter a maximum of 25 characters in this field Press Supplemental Address to add additional location information like latitude and longitude zone county and township Press OK when finished Check Self Inspected Occupancy to mark this occupancy as self inspected This attribute can be used to limit lists of occupancies to be inspected Check Primary Occupancy to mark the occupancy as the primary occupancy record of occupancies using a common Property ID Check Hide Occupancy in Lookups to remove the occupancy from lookups This should not be checked if you will use the Occupancy ID in incident reports Type or look up the Construction Completed date Response District and Inspection District both use the D
177. is saved Specify a Default History Code value to automatically default a Staff Member History code for staff history records created when prompted following a change Press OK To Setup LOSAP Values Select the Administration menu Administrative Options option Click the Staff tab General tab Press Setup LOSAP Values to set up values to use for the Length of Service Awards report Press F1 to display the Setup Length of Service Awards LOSAP Report Setup topic for more information Press OK 000 To Specify Staff Administrative Options Select the Administration menu Administrative Options option Click the Staff tab Activities amp Training tab Select Activity and training hours printed format This controls the activity and training activity hours on printed reports only All time values in FH data entry forms are decimal only Display as a decimal number displays hours in decimal format For example 1 hour and 30 minutes is displayed as 1 5 hours Display as hours minutes displays hours and minutes For example 1 hour and 30 minutes is displayed as 1 30 Check Auto Calculate activity amp training hours paid from start and end date time to calculate and insert activity and training hours for new records Hours Paid and Hours Worked 000 Specifying Administrative Options 57 Check Prompt to confirm times used in calculating hours worked when adding new activity from in
178. ist all records Tracking Inventory You can track inventory usage There are two steps add inventory items then track item usage Availability can be tracked from the Inventory form Usage Purchasing section Usage records are added from equipment usage records that can be added from NFIRS and EMS incidents staff activities training classes and programs and inventory records You can add non incident usage information like training usages parades and other miscellaneous usage items Equipment usage can be added directly from the Other section of the fire or medical incident report or for non incident usage from the Inventory form Usage section The steps below assume that you are in the Inventory form Usage section of the apparatus equipment you want to add a usage record for To Add Inventory Item From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option Ifthe Inventory form is displayed press Browse or Ctrl O select record and press OK Ifthe Query form is displayed select record and press OK Click Usage Purchasing tab Press Add Type or lookup Date the item was added Select a Usage Type Type or lookup Usage Code Check Auto Calculate Cost to calculate the quantity entered in the Quantity field times the Hr Unit Cost value entered for the item on the Inventory form Basic section Select Add Specify Quantity If Auto C
179. istrict Districts lookup code This allows for two separate values since they may be different Save and close occupancy record Merging Occupancy Records You can merge occupancy records This feature may be used to combine two separate occupancy records that become one for example 2 stores at a strip mall entered as separate occupancies become a single store NOTICE The merge occupancy feature should not be used to merge two duplicate records that were accidentally entered two Merge Occupancies times After records are merged the merged from occupancy is still available in FH as a hidden occupancy record The Occupancy ID value for the merged from occupancy is not changed so related records like incident response records still refer to the original occupancy for historical record keeping purposes The following information is merged Chemical Inventory On Site materials Adding Occupancy Records Hl e Hydrant locations e Storage tanks e Preplan codes e Attachments and Signatures Hydrant and storage tank records are not duplicated if they already have been added for the occupancy A notes and briefs detail record detailing the merge is created on both the merged to occupancy and merged from occupancy and the merged from occupancy is marked as hidden To Merge Occupancy Records From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe
180. ists the steps to set up and use all record entry areas of FIREHOUSE Software Press F1 while running FH for additional information Using This Guide Procedures in this manual assume that FIREHOUSE Software FH is already running that you have a basic understanding of how to navigate in Windows programs for example you are familiar with how to use a mouse to select a menu and are familiar with the basic purpose of each module installed If FH has not been installed follow the installation instructions included with the installation CD If you are not familiar with FH use this manual while online help is running When you encounter an unfamiliar form or function press F1 to access the Help File then press the Search tab Type a term or keyword then press Search Topics containing your keyword are displayed Highlight a topic and press Display for the details Throughout this manual you will find specific types of information in paragraphs marked with special characters We have tried to minimize the amount of duplicated information included in the manual by referencing the information that is available elsewhere rather than repeating it When more specific information is available for a topic the page number is referenced Example of a reference There are three levels of advisories included in this manual Each level is indicated with a symbol Notice advisories contain general information that may save time and effort
181. ity State ZIP Enter the cities states and ZIP codes commonly covered by your department Expand Streets to display available codes e Street Names Enter streets commonly covered by your department Note that you can not repeat the same Prefix Street Highway Type Suffix all additional fields associated with streets are defaults that will be inserted into records when the street is used as default values Enter additional values only when the values are appropriate all the time Even if you do not plan to add all streets as you start to use FH you should enter some basic streets At a minimum enter the busiest streets into this category Setting Up Lookup Codes 15 Adding Lookup Codes To add or edit lookup codes you first have to access the lookup codes Next add the lookup codes as needed You can set up or modify groups that specify how lookup codes are grouped together see page 14 this chapter You can also add edit and delete lookup codes to a single Access Lookup category directly from lookup driven field Directly To Add a Lookup Code Select the Tools menu Lookup Tables option A form displaying available lookup code tables is displayed Select the lookup table you want to modify To display code categories for a code category group press E Select a specific code category by highlighting then press Setup The Lookup form is displayed listing all codes for the category Press New an
182. ivities To Hide This Staff Member From the File menu select the Staff Members option Ifthe Staff form is displayed press Browse or Ctrl O highlight a record then press OK Ifthe Query form is displayed highlight a record then press OK Click the Other tab Check Hide this Individual if you want this member excluded from the list displayed when Add Group is pressed from the Staff Activity form the member is still displayed in staff browse forms Save and close record Staff Activity amp Training Assigning Staff Member Instructor Codes Training class records include Staff Member Instructor codes to make it possible to track different instructors You can directly link Staff Member Instructor codes with a specific staff records To Assign Staff Member Instructor s Code From the File menu select the Staff Members option Ifthe Staff form is displayed press Browse or Ctrl O highlight a record then press OK Ifthe Query form is displayed highlight a record then press OK Click the Other tab Type a Staff Member s Instructor Code value to assign When you save the staff record the code and staff member s name will automatically be added to the instructor codes Save and close record Completing User Fields and Attaching Files You can complete user fields if they have been defined for staff records and attach files To Complete Staff User Fields
183. k Records From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK EMS Search amp Rescue Incident Reporting Ifthe Query form is displayed you are ready to select an incident then press OK Click the Other tab Press Record Lock Status The lock status of the report is displayed Click Manual Lock to lock the report User name is entered and only the user or an administrator can modify the incident Press OK Save and close To Review State Import Export History OO00 0O From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Other tab Press State Import Export History The EMS State Import Export Status form is displayed Press Import Log to display import history Press Export Log to display EMS export history Press OK Save and close To Display EMS Incident Report Completion Status O O From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Searc
184. lcat to save and add another record Press Vital to save and add an additional vital assessment Press Proc to save and add a procedure Press Med to save and add a medication Press Save to add the record to the Assessments and Treatments list To leave without adding record press Cancel Press Close Save and close patient record Replicate Patient Assessments Procedures Medications From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Assessments amp Treatments tab To automatically determine the time for the detail record based on the highlighted record check Use Auto Increment and specify the Auto Increment value Highlight record to replicate Press Replicate Complete remaining fields as needed To add additional detail records set the Auto Increment Value and check Use Auto Increment to automatically complete detail times or uncheck Use Auto Increment to leave the detail time incomplete and Press Rplcat to save and add another record Press Vital to save and add an additional vital assessment Press Proc to save and add a procedure Abou
185. lds are detailed in the Advanced Feature Reference About Record Locking and Modification You can manually lock the incident from modification by non administrative users and view modification history Manual locking is different than automatic incident locking which is specified in the Administrative Options form Incident section Both manual and automatic locking limits the ability of non administrative users from modifying the incident unless the user has the right to override record locks To Manually Lock Record From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Other tab Press Record Lock Status Check Lock Record When the record is locked the incident can only be modified by an administrator or the user who locked the report Related staff activities are not locked To View Manual Record Lock Status From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Other tab Press Record Lock Status If the record is locked the incident ca
186. le you can select multiple codes from multiple groups Tip For predictable sorting codes should all be the same length For example if you set up codes for Pay Scales and you have 20 different codes for pay scale with varied length codes e g I for Fire Response 2 for Fire Response to Medical and 10 for Medical Response the sort order may not be what you anticipate Using the example codes the Pay Scales codes would be sorted as follows Code Description Fire Response 10 Medical Response Setting Up Lookup Codes lI 2 Fire Response to Medical The solution is to left pad with zeros so all codes are of equal length i e O for Fire Response 02 for Fire Response to Medical and 10 for Medical Response Find your longest code and make all codes equal length by padding zeros to the left For example a six digit code for one padded to the left with zeros is 000001 Minimum Recommended Codes to Add You do not need to add lookups to all available categories The minimum recommended codes to add are listed below by module Minimum Recommended Incident Report Codes NOTICE Add keywords to comments for NFIRS 5 0 codes that are difficult to remember When you insert the NFIRS 5 0 code into an incident use the word or phrase search and use the keyword you entered to quickly locate the code Find Codes e 911 Used Codes 1 character maximum codes that indicates different types of 911 used Can be required depending on sy
187. lected area User can override appended notes and narratives when append only is enabled via the Administrative Options form Database tab Data Security tab NOTICE View rights are assigned when any other rights are assigned Removing View rights removes all other rights in the selected area View Rights Rights can be assigned to allow a non administrative user to override record locks If this user does not need access to lookup tables distinct value lookups or add ons the user name and password is ready to be used to access FH Save and close the User Setup form then add additional users or exit the Users and Security form If this user needs access to lookup tables distinct value lookups or add ons you should assign these rights for the user To Assign Lookup Tables for User Non Administrative Users Ifthe Users and Security form is not already displayed select the Administration menu Users and Security option select the non administrative user to modify then press Properties Click the Lookup Tables tab Press Allow All to allow access to all lookup categories Press Restrict All to restrict access to all lookup categories Specifying User Security 65 66 Select a specific lookup table to assign rights to the table When you select a specific lookup table you are prompted to specify access to subcategories Select Yes to grant access to all subcategories
188. light a record then press OK Ifthe Query form is displayed highlight a record then press OK Click the Contacts tab Press Add The Staff Contacts form is displayed Enter contact information Save and close record Staff Records 79 80 About Staff History Records Add historical information about the staff member like immunizations physicals rank changes and the issuance of generic equipment You can automatically prompt to add staff history records via the Administrative Options form Staff section See To Specify Staff Administrative Options on page 51 for more information To Add Staff History Records From the File menu select the Staff Members option Ifthe Staff form is displayed press Browse or Ctrl O highlight a record then press OK Ifthe Query form is displayed highlight a record then press OK Click the Additional Records tab Press Other History If no history details have been entered the History Detail form is displayed If history details have been added a list is displayed Press Add Enter Date Time and Quantity Type or look up the staff member history code in the Code field Enter any pertinent notes Check Require staff administrative rights to view if the history record should only be viewed by users with administrative access Press Save and close record Oo 8000 About Staff Equipment Records Add or view equipment associated with the staff
189. luded in a dictionary Ignore The word typed in the Word field is assumed to be spelled correctly even if it is not included in a dictionary Press OK to update the user dictionary Press OK to close Spell Check options Press OK to close Administrative options Set Spell Check Options 235 911 Used Codes 12 Add Arson Investigation 164 Attached Files 214 Base Apparatus Equipment amp Inventory 98 99 101 103 105 107 Base Occupancy 110 111 113 115 117 119 121 123 125 127 129 Chemical Inventory 119 Civilian Fire Casualty 153 EMS Exposures 83 Fire Report 148 Fire Service Casualty 154 Generic Equipment 100 HazMat 156 Hydrant Locations 120 Hydrant Records 210 Incident Report Narrative 165 Inspections 114 Multiple Staff to Activity 88 NFIRS incident 134 Non Incident Related Staff Activities 87 89 Onsite Materials Products 121 Patient to EMS Search amp Rescue Report 191 Person Entity Involved 148 Personnel amp Activities 143 161 190 Report Authorizations 169 Special Studies 166 Staff Availability Records 81 Staff History 80 Index Staff Member 78 79 81 83 85 State Import Export History 168 Storage Tanks 120 Structure Fire 151 Training Class 92 Training Program Requirement 95 Training Programs 94 95 Violations 115 Wildland Fire 158 Add a User 62 Add A User 64 68 Administrative Access 63 Administrative Options
190. maining inspection fields as needed If you use the optional Accounts Receivable module and an invoice has been created for this inspection the Inspection Fee is calculated for you but note that any additional fees associated with violations if any are not included in the Inspection Fee Save and close inspection To Batch Schedule Inspections Using Filter Parameters From the File menu select the Inspections option Batch Schedule Inspections option The Batch Schedule Inspections form is displayed Change Select the method to Select Using Filter Parameters Select Completed Inspection or Scheduled Inspection then specify the date range for when the last inspection was performed at the occupancies that you will be creating inspections for Type or look up Inspection Type codes to create new inspections for Check Exclude Reinspections if you do not want to create any inspections based on inspections marked as Reinspections If necessary specify Occupancy Inspection District and Station to limit created inspections to the specified district and or station Check Include occupancies with any of the following specific property uses and specify occupancy property use codes to create inspections for occupancies with the specified property use codes even when there are no matching inspections added previously Check Exclude any occupancies that already have a future scheduled inspection of the specified type if you d
191. n only be modified by an administrator or the user who locked the report Locking functionality is specified in the Administrative Options form Incident section To View Record Modification History From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK NFIRS Incident Reporting Ifthe Query form is displayed highlight an incident then press OK Click the Other tab Press Record Modification History The Record Modification History form is displayed The amount of information displayed depends on the level of tracking selected from the Administrative Options form Database section Press Close when finished About State Import Export History View a history of imported for state and regional data collection centers and exported incidents To View State Import Export History From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Other tab Press State Import Export History Press OK when finished About Report Authorizations Report authorizations are most often used to indicate member making report or
192. n a subfolder in the program directory default is C Program Files FIREHOUSE Software named NFIRS You are given additional options for creating additional copies of the file later in the export process Incident transaction file name is based on State FDID and To Date with a INC extension For example a Pennsylvania department with FDID 20007 with a to date of 03 01 06 would result in a incident transaction file name of PA20007032006 INC EMS incident exports have an EMS extension Department Information File A copy of the department information export file is placed in a subfolder in the program directory default is C Program Files FIREHOUSE Software named NFIRS You are given additional options for creating additional copies of the file later in the export process Departmental transaction file name is based on State FDID with a DEP extension For example Pennsylvania department with FDID 20007 would result in a departmental transaction file name of PA20007 DEP Operations NOTICE If the state contacts your department for a transaction file you have already sent you can resend the file in the export Backup Copy folder default is C Program Files FIREHOUSE Software NFIRS rather than recreating the file Check Wipe disk before saving if you want to remove files from the specified directory before exporting Check Write protect all output files when done if you want to make the transaction files write p
193. n double click on the field from source table that goes to target Code Description and Comments are the fields you will most likely use Class is only used if lookup codes are grouped Save and close the External Data Import Field Properties form Save and close the External Data Import Properties form Press Run to import the data Press Commit to add the data to the specified lookup Press Close OOood8d Setting Up Code Groups Code groups allow similar codes to be stored together under common headings Groups are optional and when used properly organize the lookup codes for a specific category into manageable lists When a specific lookup is displayed group names and ungrouped codes are displayed For example if street codes were divided into two groups alphabetic streets and numbered streets the lookup would look like this when displayed in a lookup table See Setup Code Groups on page 14 in this chapter Alphabetic Numeric Each group can contain many street names Selecting a group drills down to display the codes associated with the group For example the Alphabetic group was selected below so the associated codes are displayed below the group Setting Up Lookup Codes 19 Alphabetic Any Street Baker Avenue Etc Numeric You can display and hide codes for the group minimizing the amount of scrolling required to view all lookup codes Below are our recommended guidelines for using lookup c
194. n not initiate new records Day mode is enabled via the Workstation Options form Other section Journals amp Reminders section only a single day is displayed To Browse Month and Year Select the File menu Department Journal option The current year s month is displayed with the current day highlighted Events for the highlighted day are displayed to the right Inthe month area above the calendar press 4 to move to the previous month or to move to the next month In the year area above the calendar press 4 to move to the previous month or to move to the next month Click a specific day to view a list of events for the day Press Close if finished To View a Selected Date Select the File menu Department Journal option Press Options then select the Select Date option Operations Specify a Select Date value or press Calendar and select a date then press OK Press OK Press Close if finished To Set Filtering Select the File menu Department Journal option The current year s month is displayed with the current day highlighted Events for the highlighted day are displayed to the right Press Filtering The Filtering Options form is displayed You can select more than one code for station shift and unit See the FH Help File access the Search tab then type Select Multiple Records Type or look up Station s to filter the department journal for specific stations
195. n of the fire Type or look up the Wildland Fire Cause code that best describes the cause of the wildland fire Type or look up Human Factors Contributing To Ignition codes in this section as are applicable If there were no human factors check None Type or look up Factors Contributing To Ignition codes for factors 00 that contributed to ignition Click the Fire tab Type or look up the Fire Suppression Factors codes that best identify the conditions or factors that constituted a significant suppression problem at the incident The first three are exported Type or look up Heat Source codes for the heat source that ignited the item first ignited Type or look up a Mobile Property Type code that best describes the type of mobile property involved Type or look up a Equipment Involved code for the equipment involved in the ignition Adding NFIRS 5 0 Incident Reports 161 162 o O O O O O If the National Fire Danger Rating System Weather Station ID is provided Weather Type Wind Direction Wind Speed Air Temperature and Relative Humidity Fuel Moisture and Fire Danger Rating fields are optional Press Weather to display Weather Information form Type or look up the Weather Type code indicating weather at the start of the incident Type or look up the Wind Direction code for the direction that the eye level wind is coming from Type the Wind Speed in miles per hour The
196. n the description field If only one matching description is identified the code and description is inserted If there are multiple descriptions matching they are displayed and the proper code can be selected If you will generally be selecting codes using the description you can reverse the order so that the description is listed before the code field via the Workstation Options form General section If you do not know the code or description you have several alternative methods for displaying valid values Press E to display valid values for the field With the cursor in the desired lookup driven field press the F2 keyboard key to display valid values unless disabled in Workstation Options Right click your mouse with the cursor in the lookup driven field and select the Lookup option NOTICE By enabling right mouse lookups in Workstation Options Workstation available lookup codes are directly displayed by pressing the Options right mouse button with the cursor in the lookup driven field To Install Preset Lookup Codes FH includes sample lookup codes in the DemoData database You can install these preset codes From the Tools menu select Lookup Tables Select a specific lookup table and category then press Options If preset codes are available for the area an Install Preset Codes option is listed Select preset codes then press Install To Print a List of Lookup Codes I Access the Repor
197. nd close The remote response record is ready to be exported See the next topic for the steps to merge remote responses with the incident at the central FH installation To Merge Remote Responses to Central Database From remote station select the File menu Station Management option Export Data to Station option Select Dispatch amp Remote Station Incident Reports then specify additional criteria for export Additional information on using export to station is included in the Advanced Feature Reference Station Management chapter At the central station select the File menu Station Management option Import Data from Station option Select the directory containing the export file created by the remote station then press OK Dispatch Remote Station Incident Reporting Chapter 14 Hydrant Management Maintain complete records of hydrants and hydrant related activities 215 216 Adding Hydrant Records Hydrant records include basic hydrant information like make owner and capacity and provides the ability for tracking hydrant activities like inspections repairs and flow tests To add records the record form must be opened How you open a form is defined in the Workstation Options form General section Data Entry Forms section Tools menu Workstation Options or if individual preferences is enabled Tools menu User Preference option To Add New Hydrant Record From the File menu select the Hydra
198. nd close detail record To add multiple staff to a training class at a time Press Add Group The Staff Group Select form is displayed The process for adding groups is the same as adding groups to staff activities See page 88 for details o Once selected staff are added the Training Class Group Add form is displayed Values are brought in from the Training Class form when available Fields can be modified as necessary Press OK to add participant details for selected staff members Complete remaining fields as necessary Rating bureau criteria can be added to the Rating Bureau section Notes about the training class can be added to the Notes section The training class objective is typically entered into the notes field A default objective can be added to the Training Categories code and when the code is added to a new training class the default objective is inserted into the training class notes Add user fields attach files complete casualty reports and add equipment used as needed to the Other section Save and close training class Understanding Training Classes 93 94 Understanding Training Program Records Training programs are certification programs for staff members Training programs are a set of requirements that when met certify staff members in the given training program Requirements can be training classes required activities or electives Setting Up Training Programs
199. nd meds data entry to disable the ability for automatic time incrementing to be used Select this option if data entry personnel are not likely to verify times entered for vitals procedures medication records Check Default auto time increment and specify the Default auto time increment When enabled adding a vitals procedure medication record adds the most recent time from the most recent vitals procedure medication time plus the specified number of minutes Not available if Disallow auto time increment options during vitals procedures and meds data entry is enabled Specify EMS Vitals Blood Gas Measurement Administrative Options Select Use Sp02 to track a percentage Most departments do not collect arterial oxygen percentage requiring a highly specialized tool and generally represented as Sp02 Select Use Pa02 mmHg to track Pa02 in mmHg units Specify EMS Vitals Temperature Measurement Select Use Fahrenheit to track temperature in Fahrenheit Select Use Celsius to track temperature in Celsius Press OK To Specify EMS State Reporting Options Select the Administration menu Administrative Options option Click the Incident tab EMS Search amp Rescue tab State Reporting tab Press Change EMS Code Set to specify active EMS code set See the Select Active EMS Code Set in the FH Help File for details about available EMS code sets Check Generate Patient Lithocode Values and specify a Start
200. nd payment responsibilities if the optional FH Accounts Receivable module is enabled all preplan detail records and all incident response information You can add new occupancy records linked to the multi occupancy property record link additional existing occupancy records or remove an occupancy record from the multi occupancy property record Adding Occupancy Records 130 NOTICE Multi Occupancy Property records were first added in FH 6 but multiple occupancies could be associated together using the Property ID If your records originated before FH 6 the occupancy records that are associated via the Property ID field are not included in multi occupancy property browse lists until one of the occupancy records is selected as a primary occupancy Check Primary Occupancy for Prop ID on the Occupancy form Address section FH 5 Records To Add New Multi Occupancy Property Record Existing Occupancy From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the primary occupancy record from the list then press OK Type a Property ID value You can use the Occupancy ID or any unique value to identify the property the Occupancy Name for the primary occupancy in a multi occupancy property record is used in browse lists so the Property
201. nformation for certain incident types When you complete a NFIRS incident report and use an Occupancy ID building information associated with the occupancy is automatically inserted Complete remaining fields as needed Press Save Adding Occupancy Records 113 114 About Owners and Contacts You should add occupancy contacts if possible Occupancy contacts can be owners occupants or keyholders To Add Owners amp Contacts If you want to list occupants for the occupancy record add Add Occupants occupants to the Owners amp Contacts section From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Owners amp Contacts tab Press Add The Contact Detail form is displayed At aminimum complete either Last Name or Business name Complete remaining fields and sections as needed then save and close form See the FH Help File Occupant Contact Detail form topic About Occupancy Inspections Occupancy inspections can be added from an Occupancy record or from the File menu select the Inspections option Inspection Records option To Add Inspections amp Activities From the File menu select the Occupancy Management option Occupancies and Preplans opti
202. nformation on adding groups is listed on page 88 Press Open to change a selected staff member record The Participant Detail form is displayed Press Edit Group to apply changes to all staff member records added for the staff activity The Staff Activity Group Update form is displayed See the FH Help File Staff Activity topic for more information on related forms Notes and miscellaneous items like attached files and record modification history for the staff activity can be accessed Save and close the Staff Activity form Add additional activities if needed Press Close when finished About Incident Equipment Usage Equipment usage records detail how your equipment records are used Accurate usage records include equipment hours or miles and will be part of your maintenance tracking routine if you have set up scheduled maintenance items To Add Equipment Used From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Additional Reports tab Press Equipment Used The Equipment Used form is displayed Press Add to add an equipment used record or Add Group to add multiple equipment usage records The Usage Purchasing Detail form is displayed Complete equipment usa
203. ng the report missed it or forgot to fill it out Numeric fields such as dollar loss can be left blank if a value is not known The number 0 00 or 000 is a valid code for many coded fields It is the value for Other and is intended to be used where the item or issue being coded is identifiable but the code selection list does not contain the description of what you have identified In some data elements there are codes ending in 0 that allow for further identification of the item or issue For example where you know part of the answer but not enough to code it at the specific level required by the options in the list Understanding NFIRS 5 0 Incident Reports 135 Adding NFIRS 5 0 Incident Reports Details for entering a NFIRS incident follow To Create a New Basic Incident From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Reports option Ifthe NFIRS Incident Report form with the last modified record is opened press New or Ctrl N to add a new record Ifa blank NFIRS Incident Report form is opened you are ready to enter a new staff member Ifthe default query for selecting NFIRS Incident Reports is displayed press Cancel Basic information shared throughout all areas of the fire incident report are displayed in the form header FDID is automatically entered based on the station indicated on the Workstation Options form Workstation Location field F
204. ng trends problem areas or a specific issue being studied When the answer becomes known through the special study the collection of that field is no longer required If you are participating in a special study entries depend on the type of data being collected Use the codeset defined for the particular Special Study field if it is a coded entry The data entered may also be a date or a numeric entry if the field has been so defined To Add Special Studies From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Other tab Press Special Studies Type or look up Special Study codes as defined in the state or local jurisdiction Press Save Save and close incident Completing User Fields User defined fields include any fields added by your department To Add User Field Values From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Other tab Press User Fields Adding NFIRS 5 0 Incident Reports 169 170 User defined fie
205. nless Allow individual user preferences is enabled from the Administrative Options form General section About Workstation Station Codes Workstations can have a Station code associated with them that can be defaulted into new records initiated at that workstation To use the Station code associated with the workstation you must also select Use the station where the location is physically located option on the Administrative Options form Database section Rules amp Defaults section To Assign a Workstation Specific Station Code Select the Tools menu Workstation Options option Click the General tab Startup amp Navigation tab Type or look up Workstation Location The station value entered is defaulted in Station fields for new records initiated from the workstation unless otherwise specified in Administrative Options form Database section Rules and Default Values section Press OK About Startup and Navigation Options Control the startup options and basic form navigation options for the workstation To Specify Startup Options Select the Tools menu Workstation Options option Click the General tab Startup amp Navigation tab Check Automatically load the Reminders form on login to display the Reminders form after logging in to FH Check Automatically load the Journal on login to display the Journal form after logging in to FH Press OK Workstation Options To Specify Field Navigati
206. nspection previous actually inspection occurred And so Same information as 2nd inspection until the violation is repaired or a variance is forth issued Press Save If there are outstanding violations and the date entered in the Next Recheck date field is greater than the system date you are prompted to create a scheduled inspection or inspections for the date entered in Next Recheck Press Yes to create a scheduled inspection The Create Scheduled Inspection form is displayed Press OK Adding Occupancy Records 117 118 Save and close inspection record To Add Violation Using the Inspection Checklist Ooo Oo From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Inspections amp Activities tab Existing inspections and non incident occupancy activities like plan reviews public education etc performed at the occupancy are listed Highlight inspection and press OK Click the Violations tab to display the Inspection form Violations section Press Use Checklist Complete the inspection checklist For each item Select Pass if there was not a violation Select Fail if there was a violation complete the violation de
207. nt Journal option The current year s month is displayed with the current day highlighted Events for the highlighted day are displayed to the right Press New then select the entry type Valid types e Dispatch Remote Station Incident Report e NFIRS 5 0 Incident Report e EMS Search amp Rescue Incident Report e Incident investigation e Department Event Operations e Training Class e Staff Activity e Occupancy e Occupancy Inspection Activity e Apparatus Equipment or Inventory Item e Apparatus Equipment Maintenance e Inventory Usage e Hydrant e Hydrant Flow Test Activity When you select the type the appropriate form is displayed ready for data entry Add information as needed then save and close Press Close when finished Using the Department Journal 229 230 Send a Message Send messages to specific users staff within FH FH messaging creates multiple notes on save so they can be deleted individually FH Internal Messages can be sent to all FH users specific staff members by name station assignment rank status if a Staff ID is associated with an FH user login record or specific users or user groups if you do not associate Staff ID with FH login records Sending and Receiving Messages FH Messaging checks for unread messages at a user defined interval and automatically displays a message when a message for the currently logged in user is received To Send a Message From the Tools me
208. nt Management option Hydrant Master Records option Ifthe Hydrant form is displayed press New or Ctrl N to add a new record Ifthe Query form is displayed press Cancel to add a new record Type or look up the Number Prefix Street Highway and Type Type the Hydrant No that uniquely identify the hydrant Complete hydrant Specifications area values as needed Type or look up the Hydrant Class Use the Class code to specify available types of hydrant records Type or look up the Main Type the hydrant is connected to Complete remaining hydrant values as needed Save and close when finished 000 Add Hydrant Contacts From the File menu select the Hydrant Management option Hydrant Master Records option Ifthe Hydrant form is displayed press Browse or Ctrl O to display a list of records select record then press OK Ifthe Query form is displayed select a record then press OK Click the Contacts tab Press Add to add hydrant owners and or purveyors or other contacts for the specific hydrant Save and close Hydrant Management Add Hydrant Service Activity From the File menu select the Hydrant Management option Hydrant Master Records option Ifthe Hydrant form is displayed press Browse or Ctrl O to display a list of records select record then press OK Ifthe Query form is displayed select a record then press OK Click the Activities tab Press Add
209. nt or extrication Use the buttons to add incident type codes or cause of injury codes See the notice Adding Additional Codes before modifying this list Check Require specific Injury Illness codes to require injury illness details if an injury or illness is indicated in the patient record Check Require Injury Matrix if injury to require the injury matrix if an injury is indicated in the patient record if applicable Check Provide the option to auto generate the EMS scene patient narrative to enable automatic EMS scene patient report narration More information on modifying and creating auto narrative templates is available in the Advanced Feature Reference Press OK To Specify EMS Assessments amp Treatments Administrative Options Select the Administration menu Administrative Options option Click the Incident tab EMS Search amp Rescue tab Assessments amp Treatments tab Check Require a Vitals Assessments record to require patient vitals or assessment records for each patient Not Assessed and Not Applicable are options Check Require a Procedure record to require a patient medical procedure record for each patient None and Not Applicable are options Check Require a Medication record to require a patient medical medication record for each patient None and Not Applicable are options Check Disallow auto time increment options during vitals procedures a
210. nu select the Send Message option Select the message recipient s Recipient groups are displayed select the box to the left of the recipient to select all members in the group or display the members of the group by pressing the plus box and selecting individually Type the message in the Enter Message Text Below area Specify a This note will be automatically deleted date to automatically delete the message on the specified date or leave the date blank to keep the message until it is manually deleted Press Send Press OK to prompt When the recipient logs in to FH or if polling is enabled the specified interval passes they are notified that they have a message to read Operations Printed Reports and Queries Printed reports provide access to all of the data your department has entered FH includes more than 300 preset reports so reports that detail a wide range of activities and different situations are available Printed reports are not limited to print they can be viewed on the screen and output to a variety of different formats Queries are used to browse FH records and can be used to output FH data to a variety of formats To Run a Report From the Reports menu select the area containing the report The Reports form is displayed Add frequently run reports to your report shortcuts to Report Tip save time If you are not sure where to look for a specific report try the search feature Press
211. o all linked permits Linked Permits Save and close permit To Renew Expired Permit from Occupancy From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Additional Records tab Press Permits A list of permits is displayed Highlight permit to display then press Renew The Renew Permit s form is displayed Select permit number Select Auto generate the new permit number to allow FH to assign a new number Select Use a specific permit number and assign a permit number if necessary Check Use the default permit fee and calculate expiration date based on length specified in the lookup table to use the default values for fee and permit length added to the lookup code Check Carry the notes from the current permit forward to the new permit if desired Change the Staff ID of the permit issuer and Issue Date if necessary Select the permit types to renew When a permit type is selected all expired permits for that Permit Type for the occupancy are renewed Press Renew The Permit Detail form is displayed Adding Occupancy Records 123 124 To Complete permit information as needed then save and close When there are multiple permits
212. o generate the NFIRS incident narrative to enable automatic NFIRS report narration More information on modifying and creating auto narrative templates is available in the Advanced Feature Reference Press OK To Specify EMS General Administrative Options Select the Administration menu Administrative Options option Click the Incidents tab EMS Search amp Rescue tab General tab Check Require EMS report for these NFIRS incident types to require EMS incidents when NFIRS incidents with listed incident types are indicated Press H to display a list of available incident type codes When you press to add additional codes the codes that Adding have already been added are also selected You need to Additional Codes press the Ctr 1 key before selecting additional codes to add the new code and keep the existing list intact Specifying Administrative Options 5I 52 Check Require Search amp Rescue report for these NFIRS incident types to require EMS incidents when NFIRS incidents with listed incident types are indicated Press B to display a list of available incident type codes See the above Adding Additional Codes notice before modifying this list Check Require Vehicle Extrication report for NFIRS incident types or EMS Cause of Injury to require a vehicle extrication report for selected NFIRS incident types and or if the cause of injury in the EMS incident indicates a vehicle accide
213. o not want to create an inspection for the occupancy if an inspection of the specified type already exists O O O 8 O O Adding Occupancy Records 116 O00 O os 20 0o00 0000 HEH Check Exclude occupancies that are marked as hidden if you do not want to create an inspection for occupancies marked as hidden even when the above criteria for creating an inspection are met Press Next gt gt Specify default values for the inspections that are created To change values for specific fields included in a selected inspection highlight inspection s and press Update Field select the element to change type or lookup the value then press OK Press Next gt gt Select remaining options Check Automatically transfer any outstanding violations to include outstanding violations in the inspections created Check Transfer default occupancy contact as inspection responsibility party to use the primary occupancy contact as the inspection responsible party value Check Remove existing future scheduled inspections of the selected type for each occupancy to remove other inspections of the same type Use this feature to keep inspections accurate when the inspection schedule changes Press Finish Inspections are created as defined Answer Yes to prompt if you are creating additional inspections or No to finish Batch Schedule Inspections Using Occupancy Query From the File menu select the Inspections
214. obile Property area Incident Report Authorizations Assignment Assignment Investigation Evidence Collected Collected By Collected By Investigation Photographs Taken By Taken By Investigation Tests Performed Performed By Performed By Staff Member Insurance Relation to Staff Member Relationship to Insured To Lock Distinct Values Lookup Category From the Tools menu select Distinct Value Lookups Highlight the distinct lookup to modify then press Setup Check Lock field date entry to only allow the values currently displayed in this list The list of other areas where the distinct values will be available are listed Press OK To Add Distinct Values Lookups Category Locked From the Tools menu select Distinct Value Lookups Highlight the distinct lookup to modify then press Setup Press New Type a distinct value then press OK To Merge Distinct Values Lookups From the Tools menu select Distinct Value Lookups Highlight the distinct lookup to modify then press Setup Highlight the specific value to remove Pane in this example then press Merge Select the value to use in the future then press OK The new value is applied to records that used the old value The previous value is no longer available Lookups To Share Distinct Values Lookups Across Categories From the Tools menu select Distinct Value Lookups Highlight the distinc
215. ocation If you select National Grid o Type National Grid Location About EMS Incidents 187 188 Select an additional descriptor for specifying the incident location for Vicinity Type or look up the City St and ZIP where the incident occurred City is the first of three fields that are part of a single lookup If the incident occurred in an unincorporated area use the city found in the mailing address for the incident location The state or province may be different from the state or province where the fire department is located ZIP completes the full address of the incident and provides a means of linking fire incident data to other geographic and population factors for comparative analysis at the local and regional levels Type or look up the Aid Given or Received code for whether aid was given or received Required for all incidents Optionally complete supplemental address information Press Supplemental Address Type or look up the Latitude and Longitude of the incident address These values if available ensure the most accurate plotting for mapping Complete remaining fields as needed Press OK to save supplemental address Type or look up a Dispatched For description for the emergency provider s impression assessment Descriptions previously used for other EMS incidents are also available When more than one choice is applicable to the patient choose the single most important
216. ode groups e If you have more than 50 codes groups will probably reduce time spent searching for specific codes e Limit yourself to 50 groups if possible e Make group names as descriptive as possible e Select groups that will be understood by all users In this example we will add groups to the Census Tract lookup in the DemoData By grouping tract codes numerically you will be able to access all Census Tract lookup codes with less scrolling To Add Groups Using Census Tracts as an Example Select the Tools menu Lookup Tables option Highlight the area and category to add groups to then press Setup Press the Groups button The Lookup Groups form is displayed Press New Group The Group for Census Tracts form is displayed 0000 In this example Census Tracts was selected from the System Wide Codes while using the DemoData database directory The information pictured was created specifically for this example Lookup Census Tracts 20 Lookups Type in the group name description and comments Comments are optional Press OK The Lookup Groups form is displayed with the codes that are available to be added to the group Code Availability All codes are available to be added to a group whether they have been added to another group or not Adding a code to a group when it has already been added toa previous group removes it from the original group and In this e
217. ompted to update all occupancies that share the Property ID when the primary occupancy for the Property ID is modified Press OK To Specify Inspections Administrative Options 000 Select the Administration menu Administrative Options option Click the Occupancy tab Inspections tab Type or look up the violation code set to use for reporting inspection violations in the Inspection Violation Codes area There are specific violation codes formatted for use in FH available Check When saving an inspection prompt to create a future scheduled inspection to add scheduled inspections after completing inspections Select Only if there are violations flagged for recheck to only create future inspections in specific instances Select When an inspection is completed regardless of whether there are violations to always prompt to create a future inspection Check Prompt to print a violation notice if violation records exist when an inspection is saved if you generally print violation notices after entering an inspection into FH Press Update Inspection Checklist Items to add inspection checklist items to the Inspection Checklist Report form Press OK To Specify Pocket PC Administrative Options Select the Administration menu Administrative Options option Click the Occupancy tab Pocket PC tab Specifying Administrative Options 55 56 Type the signature header text following the instruc
218. on Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Inspections amp Activities tab Existing inspections and non incident occupancy activities like plan reviews public education etc performed at the occupancy are listed Press Add Occupancy Management If there are outstanding violations for this occupancy that is there are violations that have empty violation repair dates and no variance issued you are prompted to select the violation Select violations and press OK to add the violation details automatically to the inspection detail record or press Cancel to open the Inspection form without adding outstanding violations If there are no outstanding violations the Inspection form is displayed Type or look up a valid inspection Type code for the inspection Enter relevant information about the inspection including the date the complaint was called in Received the scheduled date the inspection will be performed Scheduled and the date the inspection activity is actually performed Completed If Completed is empty any Violation Notice form printed for the inspection activity detail will have no date listed for the inspection date Use the last completed inspection activity detail record for printing violations for the occupancy Complete re
219. on and security systems e Inspection Activity and Violation Codes include e Inspection Activity Types 5 character maximum code for different types of inspection and occupancy related activities Examples include consultations inspections and plan reviews e Expand 4 Violation Code Sets to display available code sets You can add violation codes individually or install additional violation code sets Contact your FH sales representative for more information on available code sets e Violation Codes 25 character maximum code along with the violation article division page and default fine amount for the violation The default information can be modified The violation code set included by default is UFC 1988 Minimum Recommended Staff Activity and Training Codes e Staff Activity Positions 2 character maximum code for different positions a member can serve on in an activity e Staff Activity Types 12 character maximum code for different types of activities personnel are involved in Examples of staff activities include on scene standby meetings work detail and fund raising A Staff Activity Type code is required to complete staff activities Add the default hours default hours paid and default Default Hours points for the activity code When you add default and Points information and this activity code is used in a staff activity the default information is entered for the staff activity it can be modified from the staff ac
220. on Options Select the Tools menu Workstation Options option Click the General tab Startup amp Navigation tab Check Beep on record save and notifications if you want the computer to beep when those events occur Check If you type to the end of a field automatically advance to the next field to advance to the next field when the field value fills the field for example typing the 10 characters of a telephone field Check Highlight the entire field when you tab into it to highlight the contents of a field when you first advance to a field using Tab Check Clicking the right mouse button activates the field lookup if you want to display lookup selections using your right mouse button when cursor is positioned in a lookup driven field Check Pressing F2 activates the field lookup if you want to display lookup selections using your F2 keyboard key when cursor is positioned in lookup driven field Check Allow cursor to tab into description field for on the fly searches to look up codes by their description When enabled the cursor will go to the code description field instead of the code field when you navigate through the data entry form using your Tab keyboard in the following manner Select Conditionally to only tab into the code description field when the code is required and a code has not been entered or when the entered code is invalid Select Always to al
221. on on adding responding units and personnel is available in To Add Responding Units on page 40 Completing Responding Units and Personnel Without Editing Main Incident 173 Chapter II Investigation Reporting Investigation reports may or may not be linked to a specific incident Investigation reports can include information about people performing investigation activities referrals evidence collected photos leads and other information required to detail investigation efforts 175 176 Adding Investigation Reports Investigations can be added from a fire incident NFIRS Incident Report form Additional Reports section Arson Investigation button or entered directly When added from an existing NFIRS incident information from the incident is included Adding Basic Investigation Records Basic investigation information includes information to identify the investigation and start date status and status date To Add Basic Investigation Information From the File menu select the Incident Investigations option Ifthe Investigation form with the last modified record is opened press New or Ctrl N to add a new record Ifa blank Investigation form is opened you are ready to enter a new record Ifthe Query form is displayed press Cancel to add a new record Type a basic description of the investigation Type an Investigation ID or press Tab to have FH automatically assign one if automatic ID genera
222. ons 50 To Specify EMS General Administrative Options 51 To Specify EMS Assessments amp Treatments Administrative Options 52 To Specify EMS State Reporting Options 53 To Specify EMS Privacy and HIPAA Tracking 53 To Specify Investigation Administration Options 54 To Specify Dispatch Remote Station Administration Options 54 Specifying Occupancy Administrative Options 55 To Specify Occupancy Master Administrative Options 55 To Specify Inspections Administrative Options 55 To Specify Pocket PC Administrative Options 55 Specifying Staff Administrative Options 56 To Specify Staff Administrative General Options 56 To Setup LOSAP Values 57 To Specify Staff Administrative Options 57 To Specify Staff Administrative Scheduling Options 58 Specifying Inventory Administrative Options 58 To Enable Maintenance Prompt for PPE Type Inventory Records 59 Specifying Hydrant Administrative Options 59 To Specify Hydrant Administrative Options 59 Specifying Invoicing Administrative Options 59 Contents 2 Users and Security Section Specifying User Security 62 About Users 62 To Add Administrative User 62 To Add Administrator s Helper User 63 To Add Non Administrative User 63 To Assign Module Rights for User Non Administrative Users 65 To Assign Lookup Tables for User Non Administrative Users 65 To Assign Distinct Value Lookups for User Non Administrative Users 66 To Assign Add Ons Security for User Non Administrative Us
223. opriate Percentage of Total Acres Burned types and complete percentages for each Type or look up the Property Management code for the property type that best describes the principle entity that has responsibility for the property where the fire originated Type U if undetermined Enter the NFDRS Fuel Model At Origin code that best identifies the type of wildland vegetation burned at the point of origin NFIRS Incident Reporting Type or look up the Person Responsible for Fire code that best describes the involvement of person in causing the fire If the person responsible for causing the fire is known identifying information about the person can be entered by pressing Detail Type or look up the gender sex code of the person involved in Gender Enter the age in years in Age or type the Date of birth and calculate age Type or look up the code that best describes the activity of the person involved that caused the fire in Primary Activity of Person s Press OK to save details If the origin of the fire was less than 100 feet of any right of way enter the number of feet from the right of way to the origin of the fire in Distance Rights of way include railroad rights of way highways roads parking lots etc Type or look up the Type of Right of Way code Enter the distance above mean sea level measured in feet in Elevation Type or look up the Relative Position on Slope code Type or look u
224. orm is displayed select the record to modify and press OK Click the Other tab Press Record Lock Status Press F1 for more information Save and close To View Record Modification History From the File menu select the Incident Investigations option Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Adding Investigation Reports 183 184 Ifthe Query form is displayed select the record to modify and press OK Click the Other tab Press Record Modification History Press F1 for more information Save and close Investigation Reporting Chapter 12 EMS Search amp Rescue Incident Reporting NFIRS 5 0 includes an optional EMS section that gathers EMS related data The FH EMS module incorporates the basic NFIRS 5 0 EMS elements and adds additional capabilities including the ability to use the entire NHTSA code set If the EMS module is not configured for your FH system EMS Incident Reports can only be accessed from a NFIRS Fire Incident Report and all data elements and features not specifically required by the NFIRS 5 EMS Incident Report specification are inaccessible Validation and available lookup codes vary based on the EMS code set selected from the Administrative Options form Incident section EMS Search amp Rescue subsection accessed from the Administration menu select the Administrative Options item Incident sect
225. ormation entered in this field For example describe the item followed by the item s dimensions A hose description might look like this Hose 4 100 Type an Inventory ID or if autogenerate IDs is enabled in Administrative Options press Tab to let the program assign an ID Inventory ID is used throughout the system to identify specific piece of inventory Optionally type or look up a Linked to Inventory ID to link one piece of equipment with another For example a portable pump that is always stored on a particular attack vehicle The Linked to Inventory ID field of the portable pump record should contain the attack vehicle s Inventory ID Right click and select from a list of valid IDs or type the equipment ID of the apparatus that this item is on Apparatus Equipment and Inventory Optionally type or look up a Unit to ensure that equipment usage in incidents can be tracked for the inventory record When a responding unit is added to an incident the apparatus usage records of the apparatus associated with the unit is automatically updated Optionally type or look up the Staff ID for the member responsible for this apparatus or equipment if necessary for example the staff member the item was issued to Open the FH Help File and search for Staff Equipment for more information on adding and reviewing staff equipment Optionally type or look up a Location code Location can be generic or specific to a
226. ount numbers are available for lookup If you bill press Billing Guardian Information Check Billing Same as Patient to use patient name and address information Otherwise complete billing or guardian information Add additional information as needed then save and close Complete Residence Address area fields Click Same as Scene Address to use address information from the EMS incident Type or look up Date of Birth of the patient or the Age yrs and mos months If the age cannot be determined make an approximation For patients less than a year old enter the number of months If insurance details are available check Yes in the Insurance area and press Details The Insurance Information form is displayed Complete known insurance information Save and close form Add phone numbers if available Press to add phone type code phone number and extension Repeat for each phone number you wish to add Complete additional information as needed About EMS Incidents 195 196 Save and close EMS patient record To Add Patient Response Details 0000 From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the
227. ow Grade OO O O O O0OO O O Adding NFIRS 5 0 Incident Reports 153 154 Type or look up the Fire Spread code that best indicates the spread of the fire Choose the highest number code that applies Required for all building fires unless Fire spread was confined to object of origin is checked in the Fire Report form Fire section Fire reports are detailed on page 153 O O O 0O Complete the Number of Stories Damaged by Flame area Type Minor Significant Heavy Extreme values for the stories that suffered flame damage in the percentage range specified If the roof was the only part of the structure that burned count it as part of the top story Check Check if no spread OR same as material first ignited OR unable to determine if appropriate then skip to the Detectors amp Extinguishment section If not checked complete the Material Contributing Most to Flame Spread area Type or look up the Item Contributing Most to Flame Spread Type or look up the Type of Material Contributing Most To Flame Spread Required if item contributing most to flame spread code is less than 70 Click the Detectors amp Extinguishment System Tab Type or look up a Presence code to indicate the presence or absence of detectors Required for all building fires Type or look up the Detector Type code that best indicates the type of detector present in the area of fire origin Type or look up the Power S
228. p the Aspect code for slope faces Enter the average height in feet of flame at head of fire in Flame Length Enter the Rate of Spread of the head of the fire in chains 66 feet chain per hour Save and close the Wildland Fire Report form O O 80800 0O About Staff Activities Incident response staff activities are added from the NFIRS Incident Report form Units amp Personnel section You can review the list of staff activities added for the incident from the NFIRS Incident Report form Additional Reports section or add staff activities related to the incident but not incident response related from the Additional Reports section To Add Incident Related Staff Activity Not Response Related From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Additional Reports tab Adding NFIRS 5 0 Incident Reports 163 164 Press All Staff Activities If no staff activities have been added for the incident the Staff Activity form is displayed If a staff activity has been added a staff activity is automatically added if personnel are added from the Units amp Personnel section incident staff activities are listed and you can edit existing staff activities or add separat
229. pe or look up a Mobile Property Type code that best describes the type of mobile property involved and the written description is automatically inserted Note that the codes are organized into categories for Ground Rail Air and Water vehicles Type or look up a Mobile Property Make code that describes the make of the mobile property involved and the written description is inserted in the blank If the make needed is not found enter 00 Type the manufacturer s Model name If one does not exist use the common physical description of the property like four door sedan Type the Year the mobile property was manufactured if known Type the License Plate number if any of the mobile property involved Type or look up the two letter State abbreviation province or territory identified on the license plate or registration of the mobile property NFIRS Incident Reporting Type the manufacturer s VIN Number Vehicle Identification Number that is generally stamped on an identification plate on the mobile property Click Other Reports tab Use the Local Use section to indicate if other reports exist associated with this incident that are not NFIRS based Save and close record About Structure Fire Reports A Structure Fire Report is required for all structure fires A structure is an assembly of materials forming a construction for occupancy or use to serve a specific purpose This includes but is not limite
230. pe the estimated Release Amount of material released from the container by volume or weight to the nearest whole unit of measure Type or look up the Release Unit code Type or look up the Physical State Released code Type or look up the Released Into code that best describes the environment contaminated by the hazardous material Press Save and New to add an additional material release record Add as many as necessary then save and close Click the Scene tab Type or look up Released From code If Inside or On Structure enter the Story of Release Check Below Grade if the location of the release was below grade Type or look up a Population Density code that best describes the area adjacent to the hazardous materials release Adding NFIRS 5 0 Incident Reports 159 160 Type the numeric value for the Area Affected area affected then Type or look up the Area Unit of Measure code Type the numeric value for the measurement of the Area Evacuated then Type or look up the Area Unit of Measure code If there was no evacuation check No Area Evacuation and skip to the HazMat Actions Taken area If No Area Evacuation is not checked type the estimated number of People Evacuated and Buildings Evacuated Include buildings that were already empty in the evacuated area for example houses with no one home during the day Complete the Hazmat Actions Taken area Press and Type or look up th
231. pecific code category by highlighting then press Setup The Lookup form is displayed listing all codes for the category Press Edit and the Code For form is displayed with the existing code information Edit values to the Code and Description fields Check Hide This Code if you want to exclude the code from the Lookup form hidden codes can be displayed by checking Show Hidden Codes at the bottom of the Lookup form Press Save The code description and comments are added to the lookup codes or if you edited an existing code the modifications are added Press Close if finished oo O 800 Transferring Codes Between Separate FH Installations There are alternatives to manually entering each lookup code one at a time Lookup codes can be transferred between different copies of FH For example if there are two departments in the same county that use FH and they use the same general system codes like streets the first department to set up the codes can share the set up codes with the second department Transferring codes is a two step process e Copy to e Install from To Copy Lookup Codes to an Installable FH File Select the Tools menu Lookup Table option Select the lookup table that contains the codes you wish to copy from Press Options then Copy To Press to File and specify a path and file name you want the codes copied to then press Save Setting Up Lookup Codes 17 Press OK T
232. pes of maintenance and testing you will perform on apparatus and equipment These codes should be general enough so they can be applied to all apparatus and or equipment for example Change Oil rather than Change Truck Oil Usage Type Codes 6 character maximum code for different ways equipment and apparatus will be used Fire response maintenance and HazMat response are all examples Add Usage Codes for generic consumable items like fuel or water From the Apparatus and Equipment form Usage section you can add an apparatus equipment usage detail indicating the quantity used Vendor Class Codes 6 character maximum code for different categories of vendors Minimum Recommended Hydrant Management Codes Hydrant Class Codes 2 character maximum code for hydrant class Hydrant classes usually indicate the relative capacity of the hydrant Lookups Hydrant Defect Codes 6 character maximum code for defects and flaws found in hydrant inspections These codes are used in hydrant inspection repair details if a repair is indicated Hydrant Main Type Codes 6 character maximum code for different types of mains used for hydrants in your jurisdiction Minimum Recommended System Wide Codes Counties 5 character maximum code for counties County is a required field in certain states Associate a FIPS Code you can select from a list by right mouse clicking for each county code you add District 5 character maximum code for distri
233. pment added via the Linked Inventory section if any listed at the bottom Press OK when finished About Inventory Form Other Section Options You can add additional records and track record information from the Inventory form Other section To Add Inventory User Fields From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option Ifthe Inventory form is displayed press Browse or Ctrl O select record and press OK Ifthe Query form is displayed select record and press OK Click the Other tab Press User Fields Complete user defined fields then save and close Save and close inventory record 0000 Understanding Inventory Records 107 108 To Attach Files to Inventory From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option Ifthe Inventory form is displayed press Browse or Ctrl O select record and press OK Ifthe Query form is displayed select record and press OK Click the Other tab Press Attachments The Attachment form is displayed Press F 1 for information on using this form Save and close inventory record To Lock Record From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option Ifthe Inventory form is displayed press Browse or Ct
234. ponse Check appropriate Fire Medical Rescue Other types to indicate the main use of this apparatus at the incident The main use at the incident need not be the consistent with the apparatus type For example EMS may be the principal use of the members arriving on scene in a ladder truck Required for all incidents Complete Response Times The incident record s Alarm Date is associated with each completed time field by default press the time field s lookup button to change the date Check Cancelled and type the time the unit was cancelled if relevant Complete Unit Group Add form Personnel section values Click the Personnel tab Select the Personnel for Unit Staff is added to the current unit only Press Add or Add Group to add personnel Add personnel for each responding unit Optionally complete Unit Group Add form Usage section values Click the Usage tab Select the Equipment Usage for Unit Usage added is applied to the current unit only Optionally complete Unit Group Add form EMS Search amp Rescue section values These values are applied to all units added Click the EMS Search amp Rescue tab Press OK Responding units are added If Continue to the Unit Response Detail form was checked the Unit Response Detail form is displayed and you can add or edit individual unit response details EMS Search amp Rescue Incident Reporting To Add a Single Responding Unit From the File m
235. ption Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Additional Records tab Press Needed Fire Flow and enter information for calculating needed fire flow Save and close needed fire flow About Occupancy Permits Permits issued for the occupancy and whether they are up to date is an important tool for preplans To Add a Permit From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Occupancy Management Ifthe Query form is displayed select the record from the list then press OK Click the Additional Records tab Press Permits A list of permits is displayed or the Permit form is displayed If a list of permits is displayed press Add Add relevant permit information Optionally add additional permits to be associated with the current Permit No Press to add a permit Press highlight permit types then press OK to add multiple permits NOTICE When permits are linked together they are added to the occupancy as a permit and the permit details are unique but the linked permits share a Permit No value and changes to one can be applied t
236. r Distinct values lookups are available in the following areas Record Area Dispatch amp Remote Station Incident Reports Catego Reason Field Caption Reason EMS Search amp Rescue Billing Guardian Information Relationship to Patient Relationship to Patient Victim EMS Search amp Rescue Meds Administered Dosage free entry Text Description and Other Instructions EMS Search amp Rescue Patient Victim Insurance Relationship to Patient Relationship to Patient Victim EMS Search amp Rescue Patient Victim Reports Account Number Attending Physician Complaint Primary Physician Reason For Transport Secondary Complaint Patient Account Attending Physician or Designee at Destination Chief Complaint Primary Physician Reason for Transport Secondary Complaint EMS Search amp Rescue Incident Reports Reason for Call Dispatched For EMS Search amp Rescue Patient Report Authorizations Assignment Assignment About Distinct Values Lookups 23 24 Record Area Fire Reports Category Equipment Brand Equipment Model Mobile Property Model Field Caption Brand Model Model in Mobile Property area Fire Service Casualty Equipment Failures Equipment Manufacturer Equipment Model Manufacturer Model HazMat Reports Equipment Brand Equipment Model Mobile Property Model Brand Model Model in M
237. r 0O00 66 testing type Select Scheduled and enter the Start Date if this maintenance test detail has not been completed Select Completed and enter the date the maintenance detail record was completed in Start Date Type the number of Staff Hrs spent for this maintenance testing Type the number of hours the equipment was unavailable due to the maintenance testing in Down hours Type the dollar amount spent for Parts Type the dollar amount spent for Labor Type or lookup the Staff ID for staff performing the test maintenance Add a staff activity record for the staff member from the Other section if you want to track staff hours performing maintenance testing To add additional related jobs press to add one or to add multiple additional records Available fields in the Details section vary depending on the inventory type Pump Hose SCBA Personal Protective Eqpt and Ladder inventory types include specialized values in this section NOTICE The PPE type inventory record should be issued to a specific staff member by adding a maintenance test detail for the record and indicating that it has been issued The Staff ID for the PPE type inventory record is critical for tracking who has been issued the inventory record You can specify that when the Staff ID value for the PPE type inventory record is modified you are prompted to add a new PPE issued maintenance test detail record via the
238. r Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Other tab Press Display Report Completion Status to display validation results for the report including a listing of incomplete items if incomplete 0000 Adding Additional Reports to EMS Reports There are additional reports that can be added or reviewed from an EMS incident including NFIRS incidents and equipment used To Initiate NFIRS Incident Report from EMS From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Additional Reports tab Press NFIRS Incident Report EMS Search amp Rescue Incident Reporting If Use abbreviated form when starting NFIRS report from EMS is enabled via the Administrative Options form Incident section EMS Search amp Rescue subsection the Initiate NFIRS Report form is displayed Complete required and known fields then press OK Complete NFIRS Incident Report Adding an Incident Report is detailed starting page 136 To Add Equipment Used From the File menu select the EMS Search
239. r personnel counts to export incidents See the FH Help File Export Multiple FDID Counts topic for details about including personnel counts for more than one FDID To Export NFIRS Transaction File s From the File menu select the NFIRS 5 0 Incident Reporting option Export NFIRS 5 0 Export Transaction File option The NFIRS 5 0 Export Wizard form is displayed Select Export Completed Incident Transactions and Department Information and press Next gt The NFIRS 5 0 Export Wizard form Incident Report Selection section is displayed It is very important that all units and staff have an FDID associated with them if you export department information to the state Specify the FDID for which you wish to export department information and incidents Most departments will have a single FDID but departments that have multiple FDIDs can leave FDID blank to export all FDIDs simultaneously Before creating export files that include more than one FDID check with your state to confirm that they can accept a single transaction file that includes multiple FDID numbers before sending You may need to submit each FDID individually Exporting Transaction Files to State 221 222 Specify the incident date range to include in From Date and To Date Check appropriate additional options Check Export all records in this range as new transactions even if previously exported to force all department information and
240. racking is enabled for the database when Track changes to records is checked Press OK To Specify Key Values Administrative Options Select the Administration menu Administrative Options option Click the Database tab Key Values tab For each listed table Check Auto Gen to automatically generate the key counter when new records of the specified type are created Table Name is the name of the table the key counter is stored in Field Name is the name of the field the key counter is stored in Specify the Key Format for the key counter e Numeric only allows numbers e Alpha Numeric allows a combination of letters and numbers when selected the key counter will use text from a key text field and pad the remainder of the key counter with a number Specify the Key Length of the key counter A six character numeric key counter will look like 000001 while the same key counter value would look like 0000000001 if it were 10 characters Press OK To Specify Backup and Log Options Select the Administration menu Administrative Options option Click the Database tab Backup and Logs tab Check Prompt to run a database backup upon logout every to enable a prompt to back up FH database files The interval is based on the number of days entered When you exit FH the number of days since the last backup is calculated and if it exceeds the number entered in days you are prompted
241. rated To Add Incident Report Narrative From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Incident Narrative tab Add notes If auto narrative is enabled Press Auto Generate Select the narrative generation template Press Generate The narrative is generated in the Narrative Generation form o Review and make any necessary changes Press OK to insert the text at the end of the narrative If append only is enabled Press Append The Append to Narrative form is displayed Type the notes then press OK Press F7 to spell check your entry Save and close incident To Enable NFIRS Auto Generated Narratives Select the Administration menu Administrative Options option The Administrative Options form is displayed Click the Incident tab NFIRS section Check Provide the option to auto generate the NFIRS incident narrative NFIRS Incident Reporting Press OK About Special Studies The agency collecting your NFIRS data has the option to require temporary data elements that can be used for collection of information that is of special interest for a defined period Special studies are typically required to capture information on emergi
242. rds value is respected if specified o Uncheck All and specify a value to limit the maximum number of records displayed Press OK To Specify Internet Options Select the Tools menu Workstation Options option Click the Other tab then select the Internet tab Check Enable FIREHOUSE Software Internet Features to enable internet features Select Use FIREHOUSE Software web browser to use an internal FH web browser when internet website links are activated within FH Select Use the default web browser to use the default workstation web browser when internet website links are activated within FH Check Display hyperlinks underlined to display internet and email addresses with an underline Select Use FIREHOUSE Software email client to use the FH email client for sending emails within FH Select Use the default email client to use the email client that is set up for this workstation whenever an email is originated within FH Workstation Options Press Email amp FTP Defaults to specify basic email and FTP information Complete applicable email and FTP fields Press F1 with the form displayed to display additional information about available email and FTP options Press OK Press OK To Specify Automated Task Options Select the Tools menu Workstation Options option Click the Other tab then select the Automated Task tab Specify automated tasks options The task processor m
243. rea you wish to apply settings for or press and check a specific area option Press Next gt gt Check each workstation to apply settings to Check Make these the default settings for new workstation that have not yet connected to apply the selected settings to workstations added to your FH set up Check Reset all default settings and toolbar for new workstations to FIREHOUSE Software defaults to return all selected workstations to the FH default Press Next gt gt A description of the settings that will be applied is displayed Press Finish Press OK Specifying Workstation Options 37 Chapter 4 Administrative Options Administrative Options are program settings that adapt the program to your department s unique requirements Certain settings should not be changed after data has been entered Review the information in this chapter before you start entering live data Diagram Administrative Options Form Sections Administrative Options License General Database ie Incident cepa Staff C ieron C Hydrant C mocne Specify FH Specify FH license behavior for information formatting Activities amp and general fiscal year General Training Scheduling NFIRS start log in demographic requirements information and spell check Occupancy Inspections Pocket PC options All Incidents NFIRS EMS Search In
244. records or save and close record About Staff Administrative Information Add and edit confidential administrative information about the member This is a high security area with additional access control through individual user security To Add Staff Administrative Information From the File menu select the Staff Members option Ifthe Staff form is displayed press Browse or Ctrl O highlight a record then press OK Ifthe Query form is displayed highlight a record then press OK Click the Additional Records tab Press Administrative Staff Activity amp Training Enter general administrative information in the Basic section Press Insurance to add insurance details for the staff member If insurance records have already been added press Add Add available insurance information Press New to add additional insurance records Save and close when finished then press Close Press Pay Rates to enter details about pay rates If pay rate records have been added press Add Add an actual pay rate by entering the effective date range selecting Actual Pay Rate then entering a value in Pay Rate You also select whether this rate is hourly or salary Default pay is used when activities for the member are entered and pay scale is not entered For example if a staff activity is entered with 3 hours in the Hours Paid field and no pay scale code is entered the member will be paid for 3 hours
245. rence The name also provides a basis for long term analysis in recognizing patterns of repeated incidents involving the same individual or entity in the same or different locations over time To Add Incident Involvement Information From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click the Property amp Involvement tab Press Add The Involvement form is displayed Enter an individual Last Name or the manager owner of the business specified in Business Name if any without regard to whether Address same as Incident Address is checked Check Address Same as Incident Address to add incident address values Enter a Business Name if applicable without regard to whether Address Same as Incident Address is checked Add additional information as needed Press Save If there are additional persons involved press New otherwise press Close O O About Fire Reports The Fire Report form is required many of the incident types between 100 173 The Wildland Fire Report can be used in place of the Fire Report for certain incident types Completing the Fire Report form for incident types 113 118 Confined Fire Within Structure and 150 155 Outside Rubbish is optional NFIRS 5
246. reports Using the Department Journal 227 228 Press to include EMS incident reports Press to include dispatch remote incident reports Press to include department events Press W to include training classes Press to include non incident activities Press g to include expired permits Press a to include occupancy inspections and activities Press to include inventory maintenance and test records Press to include hydrant activities Press Close when finished 000000000 To Display Events Added After Department Journal Display Select the File menu Department Journal option The current year s month is displayed with the current day highlighted Events for the highlighted day are displayed to the right Press Requery Events added after the Department Journal was accessed are included in the calendar Press Close when finished Opening and Editing Events from the Journal You can view a displayed record directly from the department journal To Open Event from Journal Select the File menu Department Journal option The current year s month is displayed with the current day highlighted Events for the highlighted day are displayed to the right Double click the text description for the event you want to display The event is opened Save and close event form when finished Press Close when finished To Add New Records from Journal Select the File menu Departme
247. ress Update Group Complete values to add to renewed training programs Press OK Press Close Oo O0 0000 Staff Activity amp Training Chapter 8 Apparatus Equipment and Inventory Apparatus Equipment and Inventory records track equipment information maintenance activities and usage 97 Understanding Inventory Records Inventory records should be added for all apparatus equipment and inventory you want to track in FH Creating New Inventory Records All apparatus equipment and inventory should be entered as individual records If a piece of equipment is stored on apparatus and you need to track the testing or maintenance of the equipment enter the equipment as an individual record then associate the equipment with the apparatus which should be a separate record by using the inventory ID of the apparatus in the Link To Inventory ID field To Add Master Inventory Record From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option Ifthe Inventory form with the last modified record is opened press New or Ctrl N to add a new record Ifa blank Inventory form is opened you are ready to enter a new record Ifthe Query form is displayed press Cancel to add a new record Type a Description Add enough information to this field so that you can determine a particular piece of equipment from a list based on the inf
248. rl O select record and press OK Ifthe Query form is displayed select record and press OK Click the Other tab Press Record Lock Status The Record Lock Status form is displayed Check Lock Record to manually lock record Non administrative users will not be able to modify the record Press OK to save Save and close inventory record oo O 0O To Review Record Modification History From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option Ifthe Inventory form is displayed press Browse or Ctrl O select record and press OK Ifthe Query form is displayed select record and press OK Click the Other tab Press Record Modification History The Record Modification form listing modification history is displayed The amount of information displayed depends on the level of tracking selected from the Administrative Options form Database section Press CLOSE EEH Apparatus Equipment and Inventory Chapter 9 Occupancy Management Occupancy records are not required to be entered before incidents can be entered Occupancy information can be used in incident reports if the information is included in the occupant record For example address information is automatically filled in to the incident report structure information from the occupancy record is added to the incident report for certain types of incidents and occupanc
249. rmation on specifying FTP or email information Review the description of the process Press lt Back at any time to make changes Press Finish to create the transaction file You have created the EMS transaction files Exporting Transaction Files to State 225 226 Using the Department Journal The Department Journal is the central command system that graphically displays all of your department events on a calendar Displayed events include department events fire and medical incidents occupancy activities equipment maintenance testing training classes non incident activities and hydrant flow tests repairs About Event Display You can specify what events will be displayed by browsing the month and year displayed or by selecting a specific date When a specific date is selected you go directly to the specified date without querying to display events for the month and year so this is the recommended method when using the journal in a system with numerous records You can also filter events by station s shift s or unit s limit events to specific shift time ranges and select which records to include Events added after the Department Journal form is displayed are not automatically added but can be included by pressing Requery Day Journal is optimized for displaying numerous records When enabled the Department Journal Day Mode displays events for a selected day Station filtering options are not available and you ca
250. rocess NOTICE If the state contacts your department for a transaction file you have already sent you can resend the file in the export Backup Copy folder default is C Program Files FIREHOUSE Software EMS rather than recreating the file Check Wipe disk before saving if you want to remove files from the specified directory before exporting Check Write protect all output files when done if you want to make the transaction files write protected Press Next gt The EMS Export Wizard form Completion section is displayed The file s are always created in the program directory default is C Program Files FIREHOUSE Software EMS subdirectory You can specify additional file actions Select No just leave the file on the hard drive to manually copy the files if needed Select Yes copy the file s to the removable disk in drive to send a copy of the file to the selected available disk drive Insert media into the selected drive now o Optionally check Wipe disk to remove files from the selected diskette Select Yes transmit the file s to an internet site via FTP to send the file s to a site Check Yes attach the file s to and send an e mail message to send the file s via email Press Next gt If you are FTPing or emailing the file s define the FTP or email information then press Next gt The EMS Export Wizard form Finish section is displayed See the FH Help File Export to State Procedure topic for info
251. rotected Press Next gt The NFIRS 5 0 Export Wizard form Completion section is displayed The file s are always created in the program directory default is C Program Files FIREHOUSE Software NFIRS subdirectory You can specify additional file actions Select No just leave the file on the hard drive to manually copy the files if needed Select Yes copy the file s to the removable disk in drive to send a copy of the file to the selected available disk drive Insert media into the selected drive now Optionally check Wipe disk to remove files from the selected diskette Select Yes transmit the file s to an internet site via FTP to send the file s to a site Check Yes attach the file s to and send an e mail message to send the file s via email Press Next gt If you are FTPing or emailing the file s define the FTP or email information then press Next gt The NFIRS 5 0 Export Wizard form Finish section is displayed See the FH Help File Export to State Procedure topic for information on specifying FTP or email information Review the description of the process Press lt Back at any time to make changes Press Finish to create the transaction file You have created the NFIRS transaction files About EMS Transaction Files Some states and collection agencies receive transaction files generated via the Administration menu Database Administration option Custom Data Export option We recommend that you
252. roup to add multiple injury illness details multiple injury illness types for multiple body sites Complete fields as needed then save and close Save and close To Complete the Injury Matrix From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab About EMS Incidents 199 200 00000 Highlight a patient and press Open Click the Clinical tab Injury Matrix tab Press Include Injury Matrix if section is not already enabled Select area of body and extent of injury as necessary Save and close To Complete Cardiac Arrest amp CPR 0000 O From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Clinical tab Cardiac Arrest amp CPR tab If Provider Impression in the Patient Victim Information form Clinical section Base Clinical section does not indicate a cardi
253. rt and Queries Options Select the Tools menu Workstation Options option Click the Other tab then select the Reports amp Queries tab Check Disable output to print if you do not want reports and queries output to a printer at this workstation Specifying Workstation Options 33 34 Check Disable output to file if you do not want reports and queries output to file at this workstation Check Use Windows default to use the printer set as the Windows default Uncheck to select a printer for reports and queries that is not the Windows default printer Select a Report Layout Preview Data option to control what preview data is available while creating and modifying custom printed report forms Select Prompt to allow user to enter parameter values to prompt for parameter values when report layout is accessed Press Yes to display the Query Parameters form or No to load all possible records queried by the report You can limit the maximum number of records displayed when pressing No to prompt by temporarily selecting Never allow user to enter parameter values specifying a maximum number then selecting the Prompt to allow user to enter parameter values option Select Always allow user to enter parameter values to automatically display the Query Parameters form when available Select Never allow user to enter parameter values to load all possible records queried by the report The Maximum number of reco
254. s To Specify Field Navigation Options To Specify Data Entry Form Options To Specify Tab amp Field Coloring and To Specify Desktop Options starting page 28 for details on available user defined options Check Allow use of internal messaging to allow users to create and send internal messages within FH to other staff members Check Allow individual user macros to allow individuals to create and maintain their own user macros A macro is a saved set of defined keystrokes that are launched by a user defined key combination See the FH Help file Record Macro topic for more information on creating macros Press OK To Define Fiscal Year Select the Administration menu Administrative Options option Click the General section tab Specify the Month that your fiscal year begins if other than January Specify the Day that your fiscal year begins if other than 1 Press OK To Specify Spell Checking Options Select the Administration menu Administrative Options option Click the General tab Check Auto spellcheck narratives notes on save if you want all notes and narratives in a record to be spell checked when you save the record Press Options to set spell checker settings See Set Spell Checking Options on page 234 for available options Press OK Press OK To Specify Security Options Select the Administration menu Administrative Options option Click the Gener
255. s optional for other fires otherwise leave blank Type the Last Clr Scene and time If Alarm Time is before midnight and the Last Clr Scene is after midnight press the Last Clr Scene lookup and select the correct date Required for all incidents If cancelled enroute enter the time of cancellation Press and type or lookup an Actions Taken Select an Actions Taken code that best describes the most significant action taken during the incident Only one entry is required and up to three are included in exports If cancelled enroute use code 93 Type or lookup the Shift designation corresponding to the work shift during which the alarm occurred Local option Enter the number of Alarms transmitted for this incident Local option Enter the District number identifying the fire department district in which this incident occurred Local option Complete additional Basic section fields as needed About Responding Personnel and Units Responding unit records include elements from the optional Apparatus amp Resource Module NFIRS 9 in the NFIRS specification and is used to help manage and track apparatus and resources used on incidents We recommend adding units and personnel now since they may be used in other areas of the incident Multiple staff activities for a single incident are useful for separating distinct activities that occur on different dates and times like emergency response and follow up investigation of t
256. s Graphs or Maps to allow the specified user to create or modify reports labels or graphs Specify what form is automatically loaded when this user logs into the system in Auto Launch Form on Login or leave as lt None gt to display the FH desktop after login Check Require Password Change Next Login to prompt user to supply their own password next time they log in Save and close the User Setup form then add additional users or exit the Users and Security form You should assign module rights for each user Users and Security To Assign Module Rights for User Non Administrative Users Ifthe Users and Security form is not already displayed select the Administration menu Users and Security option select the non administrative user to modify then press Properties Click the Modules tab Specify which modules the user can access and the user s rights in the modules they have access to Specify user rights by clicking on the appropriate boxes add allow edit delete view or lock You can select combinations of these rights Add or Allow Override Add Allow Edit Del View Lock Append User can create a new record in the selected area User can perform the selected option User can change and save records in the selected area User can delete records in the selected area User can view records in the selected area User can lock records in the se
257. s amp Personnel tab Press Add If you use station roster amp availability or the optional staff scheduling module select the available unit as entered in the station roster or via staff scheduling or if the unit to add is not listed select Unit Lookup and Type or look up the Unit Response Detail form Unit Code value If you do not use station roster amp availability or the optional staff scheduling module the Unit Response Detail form is displayed Type or look up the Unit Code Complete Unit Response Detail form values The Resource Type code is usually associated with the Unit Required for all incidents Type or look up the Response Code that best describes the nature of the unit s response Check appropriate Fire Medical Rescue Other types to indicate the main use of this apparatus at the incident The main use at the incident need not be the consistent with the apparatus type For example EMS may be the principal use of the members arriving on scene in a ladder truck Required for all incidents Complete Response Times The date associated with each completed time field defaults to the Alarm Date value and can be modified by pressing the lookup button to the right of the time field Check Cancelled and type the date and time the unit was canceled if relevant Press Response Time Analysis to review elapsed times between completed date and time fields Press OK to close Press
258. s to other stations A NFIRS or EMS main report will not be created at the remote station and the remote station response incident remains in the dispatch remote station incident area To Add Remote Incident Report Select the File menu Dispatch amp Remote Station Response Entry option or press Ctrl I Start with the fields at the top The following data elements are the minimum required for an incident report Type the month day and year of the incident in Alarm Date This date is when the alarm was received by the fire department and must be the same as the date for the alarm time The Alarm Date in conjunction with the other required fields FDID Alarm Time Incident Number uniquely identifies each incident Type the Alarm Time that the alarm was received by the fire department Use military time Required for all incidents Type the Incident Number This number is used to identify a particular incident and to tie data from different modules together Enter the number assigned to the incident It may be necessary to obtain this number from an alarm or dispatch center or press Tab and FH automatically assigns the next highest available incident number It must be unique for each FDID Alarm Date Alarm Time Adding Dispatch or Remote Station Report 214 The fields required to complete an incident address vary based on the Scene Address Type value Selections are Street Address Intersection or Rural Direct
259. s Directory The Select File dialog is displayed Locate and highlight photograph directory then press OK Type a description for the directory of photos Save and close photograph detail Save and close investigation record 00000 To Preview Individual Photo From the File menu select the Incident Investigations option Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query form is displayed select the record to modify and press OK Click the Photos tab Highlight photo record Check Preview If the attached photo is in BMP PNG WMF EMF JPG GIF or TIF format a thumbnail is displayed If a thumbnail of the photo is not displayed press E to open the photo using the application associated with the file type or to open the directory of photos Save and close investigation record O 000 Adding Fire Arson Information There is specific information that needs to be tracked if the investigation is a result of a suspicious fire To Add Fire Arson Information From the File menu select the Incident Investigations option Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query form is displayed select the record to modify and press OK Click the Fire Arson tab Add fire arson details Save and close Investigation Reporting Adding L
260. s FH Save and close the User Setup form then add additional users or exit the Users and Security form If this user needs access to add ons you should assign these rights for the user To Assign Add Ons Security for User Non Administrative Users 000 If the Users and Security form is not already displayed select the Administration menu Users and Security option select the non administrative user to modify then press Properties Click the Add Ons tab Check each installed add on to enable the user to run the add on Press Save to save the user setup and return to the Users and Security form You can add additional users or exit the Users and Security form Users and Security To Assign Custom Queries Reports Graphs Maps Categories Security Ooo Oo To If the Users and Security form is not already displayed select the Administration menu Users and Security option select the non administrative user to modify then press Properties Click the Queries amp Reports tab Change Show Category Security for option to show Queries Reports Graphs or Maps Select the categories to assign rights to Press Save to save the user setup and return to the Users and Security form You can add additional users or exit the Users and Security form Disable User Login Select the Administration menu Users and Security option The Users and Security form is displayed Select the user or users multiselec
261. s Type which may be a street address an intersection of two roadways or directions from a recognized landmark Incident address information is required to establish a legal report reference This information may also be useful for identifying local problems such as checking for multiple incidents at the same location If you select Street Address o Type the Number of the specific location where the incident occurred This number is part of the address information where the incident occurred For structures and lots enter the street number For highways railroads etc enter the mile post number For block addresses enter the block number o Type or look up the Prefix Street Highway Type Suffix values for the incident o Type the Apt Room Suite number where the incident occurred any combination of numbers and letters This number is part of the address information when the incident occurs within an apartment suite identifiable room or area generally rented or leased Leave blank if not applicable NOTICE Use Intersection ONLY if the location cannot otherwise Intersection be identified Addresses Ifyou select Intersection o Type or look up the Prefix Street Highway Type Suffix values for the incident NOTICE Use Rural ONLY if the location cannot otherwise be identified Rural Addresses If you select Rural Directions o Type Directions to the incident l
262. s a Wildland fire Rural Directions should be selected and you can check Address on Wildland Report to use the address entered on the Wildland report 212 Dispatch Remote Station Incident Reporting Type or look up the City State ZIP where the incident occurred the three fields are part of a single lookup If the incident occurred in an unincorporated area use the city found in the mailing address for the incident location These fields complete the full address of the incident and provides a means of linking fire incident data to other geographic and population factors for comparative analysis at the local and regional levels Check NFIRS Incident Report if this incident is a NFIRS incident report Check EMS Search amp Rescue Incident Report if this incident is an EMS Search amp Rescue incident report Optionally click Units amp Personnel and add responding units and personnel Optionally click Patients Victims and add patients Available only if EMS Search amp Rescue is selected See To Add Basic Patient Information on page 192 for detailed instructions Check This dispatch report is finished when finished with the dispatch report then press Save O O Adding Remote Incident Report Remote station incident response records are added in the same way as Dispatch reports however the incident is not marked as finished Units and Personnel added for the incident will be included in export
263. s all availability records where the event date falls within the range of dates on the availability record It then compares the day of the week of the event with the day of week check boxes for that availability record If the availability type is Unavailable and the day of week checked for the day of the event is NOT checked it assumes the member is available otherwise it returns unavailable It works just the opposite for Available All of this is added to the time range Note that the time range entered on an availability record applies to EACH day in the range When there are overlapping availability records the records are sorted first by From Date then by To Date The last availability record determines availability status unless one of the records has priority if availability records overlap give this record priority is enabled Overlapping Availability Record Example The dates From Date To Date Times Availability 03 01 2006 12 01 2006 8 5 Available 06 01 2006 06 08 2006 8 5 Unavailable 06 01 2006 06 03 2006 8 5 Available Will be sorted as these dates 03 01 2006 12 01 2006 8 5 Available 06 01 2006 06 03 2006 8 5 Available 06 01 2006 06 08 2006 8 5 Unavailable The staff member is unavailable from June to June 3 even though the last entered availability record indicates available unless the available record is assigned priority because of the greater To Date in the unavailable record Staff Recor
264. s and queries that include user records Type or look up an FDID associated with the user NOTICE If this user will be a member of a group that shares similar rights you can save the user now add a group then add this user to the group For example add a group called Inspector and assign users that need complete access to occupancy and hydrant information User Groups Group Memberships lists available groups that include security rights defined for the group Add the rights of the group to the profile by checking to the left of the group name See Add Group Setup 68 for steps to add a group Complete remaining user security options for non administrative access users Check Customize Workstation Options amp Toolbars to allow the user to modify workstation options and to add edit or modify toolbars The Workstation Options form is accessed from the Tools menu Check Change Password to allow the user to modify their own password The Change Password option is included in the Tools menu Check Update SpellCheck Dictionaries to allow the user to add words to the spell check dictionary and modify word replace options Check Create Memorized Template Records to allow the specified user to create new memorized templates Check Create or Modify Queries to allow the specified user to create or modify queries Queries are used for browse lists graphs and reports Check Create or Modify Report
265. s in the appropriate fields and press Update Criteria to modify the saved criteria o Check Match Criteria Exactly to include staff in the list only if the values you specify exactly match the corresponding fields in the staff member record If a criteria field has a value and the corresponding field in the staff member s record is blank the staff member is not listed o Check View Hidden Staff Members to display staff members that are designated as hidden A staff member record is designated as hidden from the Staff Member form Other section o Check Limit the list of staff members available on and specify a date and or time to use as criteria for listing staff If a staff member has a specific availability record indicating that the staff member is NOT available at the entered date and or time they will be excluded Staff members without availability records are listed when they meet other criteria regardless of the date and or time unless Match Criteria Exactly is checked Before selecting displayed list of staff to activity be sure to Save Criteria press Update Criteria if you want changed criteria to be available when the criteria is next used If you want the specific list displayed to be available as a group press Save Group As and specify a group name that will be available from the Staff Groups Select form Saved Groups section Saved groups are listed in the Saved Groups section o Select staff to add to activity Select mult
266. s option Click the Staff tab Scheduling tab Check Automatically lock duty activities created through scheduling to prevent non administrators from modifying staff activity records created through scheduling Check Only allow updates to staff shift and station from scheduling to only allow the Station Shift values for a specific staff member to be changed in the staff member s duty cycle record When enabled the Station Shift value can not be modified from the Staff record Press OK O00 Specifying Inventory Administrative Options Inventory administrative options prompt to add maintenance records when a Staff ID is added or changed for a Personal Protective Eqpt type inventory record Administrative Options To Enable Maintenance Prompt for PPE Type Inventory Records Select the Administration menu Administrative Options option Click the Inventory tab Check Prompt to add maintenance record when Staff ID is added or changed for PPE type inventory Specify the Default Job code to use in the maintenance record created when the Staff ID is added or changed in a Personal Protective Eqpt type inventory record and you answer Yes to prompt Press OK Specifying Hydrant Administrative Options Hydrant administrative options are designed to prompt to add records when hydrant status is changed and to set the flow test calculation method desired to use To Specify Hydrant Administrative Options
267. s that NFIRS incident printed report statistics include all incidents run by your department Check Require Type of Alarm Code to require Type of Alarm to complete an incident report record Check Require Vehicle Extrication report for NFIRS incident types and Type or look up the Incident Type code s to require the vehicle extrication reports for Check Use abbreviated form when starting NFIRS report from EMS report to display the Initiate NFIRS Report form when creating a new NFIRS incident report from the EMS Search amp Rescue Report form Additional Reports section Check Require Detail Loss amp Value Report when total estimated loss on basic report gt 0 to require a Fire Loss amp Value Report if the entry in the Estimated Dollar Loss field in the NFIRS Incident Report form Response section is greater than zero Check Require Wildland Fire report for incident types 14x and 17x to require a Wildland Report when the Type of Situation Found field on the NFIRS Incident Report form is 14x Wildland or 17x Cultivated Crop Vegetation Check Require HazMat Report for HazMat Release code 0 and applicable incident type to require a HazMat Report when hazardous materials are indicated Check Require Arson report for Cause of Ignition 1 or Wildland Cause 7 to require an Arson Report when cause of ignition is 1 or the cause entered in the Wildland Fire Report is 7 Check Provide the option to aut
268. s were present whether or not they became involved do not check this box complete the rest of this section Press to add On Site Materials or Products For each material product add o Type or look up a Code for any significant amount of any material stored processed or sold at the property involved without regard to whether the material was involved in the fire While On Site Materials or Products should be entered for stores manufacturing and storage facilities you can code materials that might not ordinarily be found at a location Required for all fires in the applicable Property Use range unless None is checked o Type or look up a Use code to indicate whether the material is stored processed sold or repaired at the property Click the Fire tab Type or look up Area of Fire Origin code Type or look up the Heat Source code and descriptor that ignited the Item First Ignited and caused the fire Type or look up the Item First Ignited code that best describes the item first ignited by the heat source Check Fire spread was confined to object of origin to indicate that the fire spread was confined to the object of origin Adding NFIRS 5 0 Incident Reports 151 152 Type or look up the Type of Material First Ignited code Required if EEH Oooo O O O O0O O the Item First Ignited code is in a range from 00 to 69 Type or look up a Cause of Ignition code Type or look up Factors Contri
269. same time removed from the dispatch remote station incident area To Add Basic Dispatch Remote Incident Report Select the File menu Dispatch amp Remote Station Response Entry option or press Ctrl I Start with the fields at the top The following data elements are the minimum required for an incident report Type the month day and year of the incident in Alarm Date This date is when the alarm was received by the fire department and must be the same as the date for the alarm time The Alarm Date in conjunction with the other required fields FDID Alarm Time Incident Number uniquely identifies each incident Type the Alarm Time that the alarm was received by the fire department Use military time Required for all incidents Type the Incident Number This number is used to identify a particular incident and to tie data from different modules together Enter the number assigned to the incident It may be necessary to obtain this number from an alarm or dispatch center or press Tab and FH automatically assigns the next highest available incident number It must be unique for each FDID Alarm Date Alarm Time The fields required to complete an incident address vary based on the Address Type value Selections are Street Address Intersection Rural Directions or National Grid Address information is required by state and local governments to establish a legal report reference If the incident i
270. se tab Rules amp Defaults tab Select fields to require 0O00 When a specific field name is checked the field is required in all records that include the field Press 4 to the left of the field name and records that use the field are listed Deselect specific records if the field should not be required for that record Optionally add user defined system rules and default values by pressing System Rules amp Default Values More information about adding user defined system rules and default values is available in the Advanced Feature Reference Select a Station Default value Select Use the station where the workstation is physically located to use the station specified in the Workstation Options form General section Startup amp Navigation section for new occupancy inspection equipment maintenance staff availability and hydrant activity records Select Use the station from the associated master record to use the station from the master record for new occupancy inspection equipment maintenance staff availability and hydrant activity records Press OK To Specify Administrative Data Security Select the Administration menu Administrative Options option Specifying Administrative Options 45 46 O Click the Database tab Data Security tab Check Respect View Security and Privacy in Queries and Reports to obscure values from areas that the user running a query or report
271. specific apparatus The location code is also used in generic equipment records When adding location codes specific to a piece of apparatus make sure that the locations are displayed in the order of a walk around the apparatus so when you print the Apparatus Inventory Checklist report for the equipment record you can efficiently check the inventory items as you walk around the vehicle Optionally type or look up the Occupancy ID to associate a specific occupancy record with the inventory record Optionally type or look up a Vendor code to associate a specific vendor with the inventory record See page 215 for information on adding vendors Type or lookup Inventory Class code that best describes the inventory record Optionally specify purchasing replacement information e Annual Repl Cost is the annual amount set aside to replace apparatus equipment e Date Received is the date you took possession of the item e Hr Unit Cost is the amount to run equipment or unit cost for inventory items e Placed in Service is the date you put the item into service Check appropriate Miscellaneous attributes Check Generic Equipment to identify the equipment record as generic Since this is a master record do not check Generic Equipment See To Add Generic Inventory Record on page 100 for the steps Check Out of Service to identify the equipment as out of service Check Hide Equipment in Lookups to mark this equipment as hidden
272. ss Save All units added for the incident are listed in the lower right area of the Basic section and if necessary an additional unit can be added by pressing and a listed unit can be removed by highlighting the unit and pressing 192 EMS Search amp Rescue Incident Reporting To Edit a Single Responding Unit From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Reporting form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe default query for selecting NFIRS Incident Reports is displayed you are ready to select an incident then press OK Click Units amp Personnel tab Highlight the responding unit to edit Press Open The Unit Response Detail form is displayed Change values as needed Save and close To Edit All Responding Units From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click Units amp Personnel tab Press Open All The Unit Response Detail form is displayed All units added for the incident are listed in the lower right area of the Basic section and if necessary an additional unit can be add
273. st of the main report to display the patient narrative in the EMS Search amp Rescue Report form Patients Victims section when the patient record is highlighted Check List all matching patient names when starting a new patient record to display matching patients after adding the patient last name to a new patient record even if the current user does not have the rights to see patient information Administrative users will not be affected Press OK To Specify Investigation Administration Options Select the Administration menu Administrative Options option Click the Incident tab Investigation tab Check Default the Investigation ID to Incident Number when linking to an incident report to use the Incident Number value for the Investigation ID for investigation records created from an incident Check Lock the investigation report when it ts linked to a locked incident to require administrative security to modify investigation records linked to a locked incident Press OK O00 To Specify Dispatch Remote Station Administration Options Select the Administration menu Administrative Options option Click the Incident tab Dispatch Remote Station Report tab Check Require incident completion times for remote response reports to require that Arrival Cleared and Back in Svc time values be added for unit response detail records added to dispatch remote station incident reports Check Warn if the following fields are no
274. stem settings e Aid Given or Received Restricted but you can press New Plus One to add a code Enter 1 character codes for types of mutual aid received and given Can be required depending on system settings e Alarm Types 2 character maximum codes that indicates different types of alarms Can be required depending on system settings If there is a type of situation your department tracks but the situation is not included in the NFPA Type of Situation code which can not be modified use this field You can then run reports for incidents that use the Alarm Type code to track the type of situation Departments Investigating Agencies 10 character maximum code for departments and or units that give and receive mutual aid in your area Can be required depending on system settings e Additional data elements associated with this code are only required if running multiple FDID s Their FDID Their ORI Their FID Their EMS Svc Street Address City State ZIP Phone Numbers Email Addresses Group Comments e Response Codes 2 character maximum code for different types of unit response Required to complete responding unit records Response Codes are useful for determining how units are being used by the department Lookups Minimum Recommended Occupancy Management Codes e Preplan Codes 6 character maximum code for different types of preplans tracked by your department Examples include electrical services HVAC system informati
275. t EMS Incidents 203 204 Press Med to save and add a medication Press Save to add the record to the Assessments and Treatments list To leave without adding record press Cancel Press Close Save and close patient record To Add Patient Status amp Transport Information From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Status amp Transport tab Complete fields as needed Save and close To Track HIPAA Notices From the File menu select the EMS Search amp Rescue Reporting option EMS Search amp Rescue Reports option Ifthe EMS Search amp Rescue Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed you are ready to select an incident then press OK Click the Patient Victims tab Highlight a patient and press Open Click the Status amp Transport tab Press Privacy Policy Status Select appropriate status Ifthe HIPAA notice was handed out at the incident scene check Given During Call Date is filled in Press OK Ifthe notice was
276. t is enabled to disable then To Oo 00O To press Disable When a user profile is disabled the user name and password can not be used to access FH and the user is not listed in the Users and Security form unless Show Disabled User Accounts is checked Press Close Enable Disabled User Login Select the Administration menu Users and Security option The Users and Security form is displayed Check Show Disabled User Accounts Select the disabled user or users multiselect is enabled to modify then press Enable to enable selected user s Press Close Require User Password Change Select the Administration menu Users and Security option The Users and Security form is displayed Select the user or users multiselect is enabled to require a password change for then press Req Pwd Chg to require the user s to specify a new password next time they login to FH Press Close Specifying User Security 67 68 Specifying Groups User Groups are security access definitions that can be set up and applied to individual users User groups can speed user setup since you can define the security for a large group of users then add users to the group with a single mouse click To Add New Group Select the Administration menu Select Users and Security The Users and Security form is displayed Press the User Groups tab Press New The User Group Setup form is displayed with the cursor in the Group
277. t lookup to modify then press Setup Check Combine lookup options for this field with other common fields The list of other areas where the distinct values will be available are listed Press OK About Distinct Values Lookups 25 Chapter 3 Workstation Options Workstation options are program settings that adapt the program to your department s unique requirements Be sure to review available options listed in this chapter before you start entering live data Note that some installations will include sections not detailed in this manual See the FH Help File for information on sections not detailed in this guide Diagram Workstation Options Form Sections Workstation Options Local Data Remote F General amp Files Data Mapping Pocket PC Scheduling Other Options that Standard FH FH Enterprise Options that Options that Options that Standard FH control the database database control the control the control the database general FH connection connection FH mapping optional FH optional staff connection workstation details details functionality Onsite scheduling details Inspections module application Startup amp Data Entry Tab amp Field aor Desktop Navigation Forms Coloring Reports amp Internet Automated Journals amp Internal Queries Tasks Reminders Messaging 27 28 Specifying Workstation Options Workstation options apply to all users at the workstation u
278. t specified when entering an EMS patient dispatch report to require values for Unit Notified Unit Enroute Arrived Scene Cancelled Date Time if applicable Cleared Scene Mechanism of Injury Nature of Illness Provider Impression Initial Level of Provider Injury Illness and Back in Service in EMS patient records added from the Dispatch Remote Station Incident Report form Check Provide the option to auto generate the Dispatch Station narrative to allow Dispatch Station narratives to be generated More information on modifying and creating auto narrative templates is available in the Advanced Feature Reference Press OK 000 Administrative Options Specifying Occupancy Administrative Options Occupancy administrative options control occupancy record behavior and allows the violation code set to be selected To Specify Occupancy Master Administrative Options Select the Administration menu Administrative Options option Click the Occupancy tab Occupancy tab Check Prompt to add history records when name or building info changes to prompt to add a history record when occupancy record values are changed and the record is saved Specify a Default Code value to automatically default an Occupancy History code for occupancy history records created when prompted following a change Check Prompt to update all occupancies when primary occupancy building information changes if you want to be pr
279. t usage details Click the Usage tab Select the Equipment Usage for Unit Usage added is applied to the current unit only Press Add Linked to add a usage detail for the equipment associated with the Unit Complete usage details then save and close Press Add Other to select from available inventory Highlight an inventory record or multiple records press OK then complete usage details Save and close inventory usage detail when finished Optionally complete unit narrative Uncheck Apply this narrative to all selected units to add a narrative for a specific unit or leave it checked and add a narrative that will be added to each unit response Add narrative Optionally add EMS Search amp Rescue response times Click the EMS Search amp Rescue tab 142 NFIRS Incident Reporting Press OK Responding units are added If Continue to the Unit Response Detail form was checked the Unit Response Detail form is displayed and you can add or edit individual unit response details Save and close incident when finished To Add a Single Responding Unit From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe default query for selecting NFIRS Incident Reports is displayed you are ready to select an incident then press OK Click Unit
280. tails then press OK Failed items are added to the violations list Select N A if the inspection did not review the item Press Save Save and close inspection record To Repair Multiple Violations oo O 0O00 From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Inspections amp Activities tab Existing inspections and non incident occupancy activities like plan reviews public education etc performed at the occupancy are listed Highlight inspection and press OPEN Click the Violations tab Press Repair Multiple The Repair Multiple button is in select mode Press and hold the Ctr1 keyboard key then select each violation to mark as repaired Press Repair Multiple Select whether to update the recheck date or the repaired date for the selected inspections Occupancy Management Type the date Press OK Save and close inspection record To Add Inspection Responsible Party From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from
281. tation Options Check Use color coding for data entry tabs to color code form section tabs e Required sections contain fields that must be complete and that have not been completed before the record can be saved e Complete sections contain fields that must be complete and that have been completed e No Data sections have optional fields and no information has been added e Data sections have optional fields and information has been added Click a tab select a color then press OK to change the section tab color coding Check Show required tabs in bold font to boldface required section tab text Check Show the active tab in bold font to boldface the tab text for the currently active section Option only available if Show required tabs in bold font is not selected Check Use color coding for fields to color code form fields based on whether they are e required but empty e required and complete e contain invalid information and cannot be saved or e contain possibly invalid information but can be saved Click a field select a color then press OK to change the field color coding Check Color checkboxes and option buttons to color code checkboxes Press OK About Desktop Options Specify the appearance of the FH desktop To Specify Desktop Options Select the Tools menu Workstation Options option Click the General tab Desktop tab Position cursor in the main area of the Desktop sec
282. ted and unit and personnel response information is the only remaining information required to finish the incident If an incident record has already been added in FH units and personnel response are the only information needed to complete the incident and access to the main incident is restricted or unnecessary you can use the Unit amp Personnel Response Entry area The Units and Personnel Response area was specifically designed for clients that use CAD systems to create a basic incident _ NOTICE Note that the Units and Personnel Response area is different than the Remote Response area The Units and Response Personnel Response area can only be used when the incident is added to the current FH database Remote Response is for stations that add response information from a remote location then export the response information to a central FH installation using the import export feature Adding Unit amp Personnel Response Entry outside an Incident Report This area allows the Unit amp Personnel Response area of an incident report to be accessed independent of the incident An incident must exist but does not need to be complete To Add Unit and Response Entry to Existing Incident From the File menu select the Unit amp Personnel Response Entry option The Unit and Personnel Response form is displayed Press to the right of the Incident Number field and select an incident Add units and personnel Additional informati
283. tes is provided so you can include information like directions notes or specifications Use Special Response Codes for critical preplan information To Add a Preplan Alert From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Additional Records tab Press Add The Other Preplan form is displayed Type or look up a Preplan Code Type a description in Details The text you add here is displayed in the Details field on the main Occupancy form Additional Records section when the preplan listing is highlighted Save and close form 0000 To Display Detail Records from Related Property Records See About Multi Occupancy Property Records on page 129 for more information about occupancy records related by Property ID From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Additional Records tab Adding Occupancy Records 127 128 Check Display Primary Occupancy Record s Detail records preplans chemicals hydrants on site mater
284. th estimates These estimates are not intended to be legally binding in any way Ifthe building other structure outside property or vehicle for vehicle fires sustained damage in this incident from flame smoke suppression efforts or otherwise enter your estimate of the loss in whole dollars in Property Loss Exclude from this amount the estimated loss to building contents or other structure contents enter contents losses separately in the space provided later in this section Required for all fires Incident Types 100 173 whenever dollar value of property loss excluding contents if known Check 0 if there is no loss in this area If contents of a building other structure or vehicle for vehicle fires sustained damage in this incident from flame smoke suppression efforts or otherwise and those contents had value not trash or other valueless materials enter your estimate of the loss in whole dollars in Contents Loss Required for all fires Incident Types 100 173 whenever dollar value of contents loss if known Check 0 if there is no loss in this area Enter your Property Value estimate of the property value prior to the incident excluding contents based upon available information for example the owner Check 0 if there is no loss in this area Enter your estimate of the Contents Value prior to the incident based upon available information for example the owner Local option Check 0
285. the Inventory form with the last modified record is opened press New or Ctrl N to add a new record Ifa blank Inventory form is opened you are ready to enter a new staff member Ifthe default query for selecting staff records is displayed press Cancel to add a new record Type a Description Add enough information to this field so that you can determine a particular piece of apparatus from a list based on the information entered in this field For example describe the item followed by the item s dimensions A hose description might look like this Hose 4 100 Type an Inventory ID or if autogenerate IDs is enabled in Administrative Options press Tab to let the program assign an ID Inventory ID is used throughout the system to identify specific piece of inventory See page 215 for information on adding vendors Check Generic Equipment Generic equipment is added to master inventory records from the Linked Inventory section Press Save then save and close inventory record To Link Generic Equipment to Inventory Record From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option Ifthe Inventory form is displayed press Browse or Ctrl O select record and press OK Ifthe Query form is displayed select record and press OK Apparatus Equipment and Inventory 000 0O00 O00 Click the Linked Inventory ta
286. the top list and highlight the group in the bottom list then press Apply Grouping to add the item to the selected group To remove a code from a group press to the left of the group name in the bottom list to expand the list Select the code s to remove then press Ungroup Items To move codes from one group to another expand the group containing the code to move in the top list and select the group to move the code to in the bottom list then press Apply Grouping Lookup Groups Census Tracts About Distinct Values Lookups Distinct values lookup codes are fields with access to a list of distinct values made into that field in other records Any value can be typed into a distinct value lookup unless the category is locked and the distinct value is available for use in new records as soon as the current record is saved The Dispatched For field in the EMS Search amp Rescue Report form is an example of a distinct lookup field Distinct value lookups will accept any text by default If necessary the category can be locked to prevent user entry in which case the lookup behaves like a lookup code field without the code field Distinct values for categories can be shared by other categories likely to use the same values for example the Equipment Brand category in fire reports will likely use the same values as the Equipment Model category in HazMat reports and distinct values can be edited and merged with one anothe
287. tigations option Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query form is displayed select the record to modify and press OK Click the Evidence tab Press Add The Evidence Collected Detail form is displayed Add basic information Save and close to return to the Investigation form Save and close To Add Evidence Test Records With the Evidence Collected Detail form displayed Click the Tests tab Press Add The Evidence Test Detail form is displayed Add test information Save and close test detail record Save and close evidence collected detail record Save and close investigation record O00000 To Add Chain of Custody Records With the Evidence Collected Detail form displayed Click the Evidence tab Highlight evidence record and press Open The Evidence Collected Detail form is displayed Click the Chain of Custody tab Press Add The Chain of Custody Detail form is displayed Investigation Reporting Add basic information Save and close chain of custody detail record Save and close evidence detail record Save and close investigation record Adding Photos Pictures from the investigation can be added to an investigation report and viewed in FH if they are in a compatible format BMP PNG WMF EMF JPG GIF and TIF are valid options Additional formats can be added and vie
288. tion and left mouse click select a color and press OK to change color of the FH workspace background Select an image to display in the FH workspace Select from the standard graphics included with FH or choose Select highlight a graphic file then press Select to display a graphic of your choice in the FH workspace You can also click the graphic displayed in the Desktop section to display a file dialog for selecting a different graphic Specifying Workstation Options 31 32 Check Display status bar to display the status bar at the bottom of the FH workspace Check Center forms on load to open FH forms centered on the FH workspace Check Larger text for fields to increase the size of text displayed in fields Check Picture Menus to include icons for menu options when available Check Use Windows XP Theme to use themes only available for Windows XP Press OK Oo O O O O O Specifying File Location Workstation Options Unless you have a network installation the directory information is defaulted to the proper location The Lookup and CAMEO directories are optional To Specify File Locations Select the Tools menu Workstation Options option Click the Local Data amp Files tab Press Database to specify the location of the database directory The specified location will be used next time FH is accessed If you are temporarily switching between databases you should change the database dire
289. tion is enabled via Administrative Options form Database section Key Values section O Complete remaining fields as needed Note that the investigator listed at the top of the list is considered to be the primary investigator Save and close investigation Associating Investigations with Incidents When an investigation is added from an incident the investigation record is automatically associated with the incident You can associate an investigation that was not added from an incident with a specific incident if necessary To Associate Investigation with Incident From the File menu select the Incident Investigations option Investigation Reporting Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query form is displayed select the record to modify and press OK Press J to the right of the FDID Alarm Date Incident Number fields Select the incident to associate with the investigation and press OK Press OK to prompt Save and close Linking Investigations Investigation records can be linked together This allows separate investigations of a single incident to be tied together To Link Investigation From the File menu select the Incident Investigations option Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query form is displ
290. tions Press OK when finished Specifying User Security 69 Chapter 6 Concepts This chapter lists basic FH features designed to simplify data entry The Installation and Evaluation Guide contains basic information for familiarizing yourself with the program 7I 72 Getting Around in Forms Below are simple guidelines for getting around in FH forms Press Tab to move to the next field or command button To move to the previous field use the command button or press Shift Tab NOTICE Data Grids for example phone numbers and emails are an exception The keyboard key for tabbing through a Data Grids data grid is Ctr1 Tab Point the mouse cursor and press the left mouse button left click on a command button to perform the button command for example Save command buttons save the information on the form You can also press the Enter keyboard key when a command button is highlighted to perform the button command See the FH Help File keyboard shortcuts topic listed in guide index for a list of keyboard shortcuts Press the right mouse button right click with the cursor to display a menu of options Available options vary depending on where the cursor is positioned when the right button is pressed Pressing the Esc key on the keyboard is like pressing the Cancel button on a form Concepts Understanding Record Entry Order FH is an integrated package that shares information betwe
291. tions on the form Select the query used to select occupancies or inspections exported to FH Onsite Inspections Select Occupancy Master Queries or Inspection Queries and leave the Select Query field blank to use the default query for the selected category Specify a specific query to use that query to display occupancies inspections during FH Onsite Inspections export You will not be able to change the query used to display occupancies inspections when exporting Optionally check Allow user to select a different query to allow a query to be selected when exporting to FH Onsite Inspections Press OK More information on Pocket PC options is included in the Onsite Inspections Installation and Introduction Guide Specifying Staff Administrative Options Staff administrative options control general staff record behavior the default staff group select method and the display format for hours on printed reports You can also setup the LOSAP values used in the LOSAP report To Specify Staff Administrative General Options Select the Administration menu Administrative Options option Click the Staff tab General tab Specify the Default Staff Group Select Method for selecting responding personnel groups for example when Add Group is pressed from a staff activity Station Roster lists available personnel based on the station roster Staff Master Record Criteria lists
292. tivity if necessary e Expand I Staff Member Codes to display available codes e Pay Scales 5 character maximum codes for pay scales and the default pay scale rate Pay scales can be used to give a member a flat rate amount for a specific activity the pay scale can be set as an hourly amount or as a flat rate added to the staff member s default hourly rate e Staff Availability Type Codes 2 character maximum codes for different types of staff member availability These codes are used in availability records Add codes only if you plan on using participation reports based on the percentage of availability e Staff Driver s License Types 5 character maximum codes for different types of driver s licenses e Staff Member History 5 character maximum codes for historical activities you want to track for staff members These activities can include immunizations physicals tests certifications you do not have training programs set up for for example an undergraduate degree or any historical activities you want to track Setting Up Lookup Codes 13 e Staff Rank Codes 10 character maximum codes for different staff ranks titles e Staff Status Codes 3 character maximum code for different staff employment statuses Full time volunteer retired and medical leave are examples of possible statuses Expand H Training Class Program and Instructor Codes to display available codes e Instructor Codes 15 character maximum co
293. to create a new database backup See the FH Help File Backup Database topic for information on using the Backup Restore Database feature Check Purge logs every and specify the purge interval for available logs the corresponding log is not purged if the value is 0 e Database Audit Log is accessed from the Administration menu Database Audit Log option then select the Data tab Administrative Options User Login History is accessed from the Administration menu Database Audit Log option Automated Task Log is accessed from the Administration menu Automated Tasks option then select the Log tab External Data Import Log is accessed from the Administration menu Database Administration option Import from External Data Source option then select the Log tab PDA Import Export is accessed from the Tools menu Pocket PC Tools option View Pocket PC Import Export Log option Export to Station Log is accessed from the File menu Station Management option Export to Station option then select the Log tab Import from Station log is accessed from the File menu Station Management option Import to Station option then select the Log tab Custom Data Export Log is accessed from the Administration menu Database Administration option Custom Data Export option then select the Log tab Press OK To Specify System Wide Requirements and Station Default Select the Administration menu Administrative Options option Click the Databa
294. to one another highlight one record press and hold the Ctr1 key then locate and highlight the next record Repeat for all records you wish to open release the Ctrl key then press OK The top record is opened and other selected records can be displayed using the navigation buttons at the bottom of the form Selecting and Browsing Records Chapter 7 Staff Activity amp Training Staff Activity and Training includes staff records staff activities training classes and training programs 77 78 Staff Records Staff records includes basic information about the staff member and is also used to associate specific staff members with department activities equipment master records and many other detail records such as occupancy inspections and hydrant flow tests At a minimum you should add base staff information for every staff member who will respond to incidents To Add New Staff Record From the File menu select the Staff Members option Ifthe Staff form with the last modified record is opened press New or Ctrl N to add anew record Ifa blank Staff form is opened you are ready to enter a new staff member Ifthe default query for selecting staff records is displayed press Cancel Type the staff member s ID in Staff ID or press the Tab keyboard key to have FH automatically assign an ID if enabled from the Administration menu Administrative Options option in the Database section Key Counters
295. tory types e Apparatus type inventory adds apparatus specific fields in the Specs section e Pump includes pump specific fields in the Specs section and Maintenance Test Detail records include specialized pump testing information NFPA 1911 based e Hose includes hose specific fields in the Specs section and Maintenance Test Detail records include the specialized hose testing information e SCBA includes SCBA specific fields in the Specs section and Maintenance Test Detail records include specialized SCBA testing information Understanding Inventory Records 101 102 e Consumable includes quantity on hand information in the Specs section Usage records can be added in other FH areas including EMS Procedures Medications and Inventory Maintenance Testing to adjust quantity available for this specific consumable inventory record e Personal Protective Eqpt includes basic description fields and when selected include additional specialized fields in maintenance test detail records for tracking equipment issuance and condition e Ladder includes specific ladder specifications and when selected add specialized ladder testing fields to maintenance test detail records e Other when selected has no special fields and the Specs section has no additional fields available Save and close inventory record Tracking Inventory Maintenance Maintenance records can be added as they are scheduled or after they have
296. ts menu 2 Select the appropriate report category for the codes you want printed About Lookup Codes 5 Incident Report Reports E NFIRS Incident Reports NFIRS Incident Code Listing E EMS Search amp Rescue Reports EMS Incident Code Listing Occupancy Management Reports Inspection Violation Code Listing Occupancy Code Listing Staff Activity and Training Reports Personnel Training Code Listing Apparatus Equipment amp Inventory Reports Apparatus Inventory Management Code Listing Hydrant Management Reports Hydrant Management Code Listing Invoicing and Accounts Receivable Reports Invoice Accounts Receivable Code Listing Administrative Reports System Wide Codes id Depts and Investigating Agency Listing City State ZIP Code Listing FIPS County Codes Listing General System Codes Listing Insurance Companies Agents Listing Station Listing Street Listing Unit Code Listing With the appropriate report highlighted press Run Select your output option then press OK The Query Parameters form is displayed Specify criteria or press OK to include codes in the lookup table Lookups Setting Up Lookup Codes If you already have information that will be used for your codes you may be able to import the information to FH See Transferring Lookups on page 21 if a neighboring department has lookup codes you can use It is important to consider how you will be using the lookup codes before you add th
297. u select National Grid o Type the National Grid Location value for the incident location Select an additional descriptor for specifying the incident location for Vicinity Type or lookup the City State and ZIP Postal Code where the incident occurred City is the first of three fields that are part of a single lookup If the incident occurred in an unincorporated area use the city found in the mailing address for the incident location The state or province may be different from the state or province where the fire department is located ZIP Postal Code completes the full address of the incident and provides a means of linking fire incident data to other geographic and population factors for comparative analysis at the local and regional levels Optionally complete supplemental address information Press Supplemental Address Type or lookup the Latitude and Longitude of the incident address These values if available ensure the most accurate plotting for mapping Complete remaining fields as needed Press OK to save supplemental address Type or lookup the Aid Given or Received status If mutual aid is received 1 or 2 mutual aid details are optional If mutual aid is given 3 to 5 mutual aid details are required and street city state and ZIP validation is relaxed to allow entries outside your standard entries See To Complete Aid Given Received on page 140 for more information NFIRS Inc
298. upply code indicating the type of power supply used by the detector Type or look up the Detector Operation code that best describes the operation of the detector This field is to be used only if the fire was within the designated range of the detector If detector operated indicated in Detector Operation then Type or look up a Detector Effectiveness code to indicate effectiveness Used whenever detector operated If you indicated Failed to operate under Detector Operation then Type or look up the Detector Failure Reason code indicating the reason for failure Used whenever detector failed to operate Type or look up the Presence code to indicate the presence or absence of an automatic extinguishment system If Present complete the remainder of the section If None Present skip remaining part of structure fire Required for all structure fires Type or look up a Extinguishment System Type code only if the fire was within the designed range of the AES Type or look up a Extinguishment System Operation code only if the fire was within the designated range of the AES Type the total Number of Heads Operating during the fire This field is used if the sprinkler system activated NFIRS Incident Reporting Type or look up a Extinguishment System Failure Reason code that describes why the automatic extinguishment system failed to operate or did not operate properly This field is used if the system
299. ure type the Story Where Injury Occurred If the story is below grade check Below Grade Type or look up a Specific Location at Time of Injury code Type or look up a Primary Apparent Symptom that best describes the casualty s most apparent serious injury Type or look up a Primary Area of Body Injured code that best describes the part of the body that was most seriously injured It should be the same part of the body affected by the primary apparent symptom Type or look up a Disposition code if the casualty was transported to an emergency care facility by the fire department or other emergency medical service provider Complete remaining sections as needed then save and close To Add Fire Service Casualty Report From the File menu select the NFIRS 5 Incident Reporting option NFIRS 5 Incident Report option Ifthe NFIRS Incident Report form is displayed press Browse or Ctrl O highlight the record then press OK Ifthe Query form is displayed highlight an incident then press OK Click Additional Reports tab Press Fire Service Casualty If a listing of fire service casualty reports is displayed press Add The Fire Service Casualty Report form is displayed NFIRS Incident Reporting Type or look up the Staff ID for the staff member injured Oo 0 O O O 0O00 oo O O O Remaining fields complete are completed when available Type the Injury Time using military time Type the Number of
300. ust be enabled for automated tasks to run Select one of the following Select Auto Load on FIREHOUSE Software Startup to enable the task processor when FH is opened Select Auto Load on Windows Startup to enable the task processor when the computer is on Requires a workstation restart Select Disable Automated Task Processor to disable the task processor Optionally press Setup Automated Tasks to add edit tasks The steps to setup automated tasks are detailed in the Advanced Feature Guide Press OK To Specify Journal amp Reminders Options Select the Tools menu Workstation Options option Click the Other tab then select the Journals amp Reminders tab Check Filter the journal and reminders forms to only display data relevant for this station When enabled events associated with different stations are not included in the department journal or daily reminders minimizing the amount of information that is sent Enabling this option can significantly improve response times for departments with numerous stations especially for workstations connected to an FH database using a low speed connection Filtering Check Use Day Journal instead of Month Journal to display the Department Journal form in Day Mode Departments with numerous events displayed may notice improved response using the Department Journal in Day mode Press OK Specifying Workstation Options 35 36 About Internal Messaging
301. vestigation Dispatch amp Rescue Remote Station General General Resources Units Assessments amp Personnel amp Treatments aS se Authorizations State Reportin amp Locking P 8 a L Restrictions amp Privacy and Ownership HIPAA LA ia Backup amp Rules amp Data Field Auditing Key Values i Logs C Defaults Security fi Captions 39 40 Specifying Administrative Options Administrative options include important information about your installation of FH and allows the administrator to specify FH behavior Specifying Licensing Administrative Options NFIRS and EMS information is associated with Station lookup codes At least one central station needs to be added before you can export incidents from FH Department information needs to be added before department information can be exported to your state To Specify Department Information Select the Administration menu Administrative Options option Type the Department Agency Name and Number of Stations Optionally check Use Division Battalion to use Divisions and or Battalions to group staff listed in the Scheduling Console form and specify whether Battalion or Division is the higher organizational unit Add number of Career Paid Volunteer Paid and Volunteer Not Paid staff members Type the Chief s Name Type System Administrator s Name of the individual responsible for administrating the system The name appears on
302. ways tab into the code description field whether the code has been added or not Select Only to skip the code field and always tab in to the code description field You can still put your cursor in the code field using your mouse Press OK About Data Entry Forms Control data entry form behavior Data entry form behavior should be tailored to how the workstation will primarily be used To Specify Data Entry Form Options Select the Tools menu Workstation Options option Click the General tab Data Entry Forms tab Select When a data entry form first loads option Select Load the last record I was working with to display the last saved record when you open any data entry form Specifying Workstation Options 29 30 Select Start with new blank record when you open any data entry form Select this option if you will always be adding new records when you open records Select Display the default query so I can select records to display the list of available records when you open any data entry form Check Display confirmation prompt before adding new records to prompt the user when new records are created Adds an additional step to record creation but may minimize accidentally created records Check Auto apply the default memorized template if there is one to new records to use the default memorized template when you create new records Check Query and display any matching r
303. wed using the application associated with the file type To Add Investigation Photo From the File menu select the Incident Investigations option Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query form is displayed select the record to modify and press OK Click the Photos tab Press Add The Photograph Detail form is displayed Add desired information about photograph Click the Photograph tab Select Individual Photo Press File The Select File dialog is displayed Locate and highlight photograph file and press Open Check Store File in Database to keep photograph in database to allow users to display image at workstations that do not have access to the file where the photo image file is located Save and close photograph detail Save and close investigation record To Add Investigation Directory of Photos From the File menu select the Incident Investigations option Ifthe Investigation form is displayed press Browse or Ctrl O highlight the record to modify then press OK Ifthe Query form is displayed select the record to modify and press OK Click the Photos tab Press Add The Photograph Detail form is displayed Add desired information about photograph directory Click the Photograph tab Select Directory of Photos Adding Investigation Reports 179 180 Pres
304. will be the same but the Type and other details will be different Save and close when finished To link to a permit already issued for the occupancy Adding Occupancy Records 119 120 o Press Add Link Select a permit then press Link Save and close inspection record About Occupancy Chemical Inventories A complete inventory of chemicals stored at an occupancy record is a valuable tool for preplans To Add Chemicals From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form is displayed press Browse or Ctrl O select the record from the list then press OK Ifthe Query form is displayed select the record from the list then press OK Click the Additional Records tab Press Chemical Inventory When chemicals have already been displayed the Chemical Inventory form is displayed Press Add Add chemical information Press Chem Lookup to lookup the chemical information directly from the NFIRS chemicals table from the Cameo DOS or Windows not CAMEOfm database specified in the Workstation Options form from HazMat reports added to FH incidents or from chemicals added to other occupancies Save and close chemical detail record Add additional chemicals if necessary or press Close if finished O About Proximate Hydrants A list of hydrants near to an occupancy record and whether they are functional is a valuable
305. within FH Caution advisories contain information that can help you avoid minor inconveniences Danger advisories contain crucial information for avoiding loss of information About This Guide Getting More Information If there are any questions this manual does not answer be sure to check out the FH Help File included with the system To access the help file from the program press F1 or select an option from the Help menu NOTICE No internet connection is necessary to run the FH Help File No Internet Access Required The FH Help File is context sensitive so when you are using specific areas FIREHOUSE Software press F1 and information about the area is displayed The FH Help File can also be run separately from within FIREHOUSE Software by selecting the Help menu FIREHOUSE Software Help File option With the FH Help File displayed you can use the FH Help File section to locate specific information or go to Search type in the keywords to search for then press List Topics Select a topic then press Display More help on using the FH Help File is available from the Tips for Using This File link at the bottom of the FH Help File home page Using This Guide Chapter 2 Lookups Lookup fields are used throughout data entry forms in FH to simplify data entry and to ensure consistent values Date fields display a calendar for selecting a date User defined lookup fields display a set of values that
306. xample groups are added so Census Tract codes are grouped together by numeric ranges to reduce scrolling down the code list for census tract codes in the higher ranges Group for Census Tracts x Group Description i000 Census Tract 1000 00 to 1999 99 Parent Group None 7 Comments Census tracts numbered 1000 00 to 1999 00 Census Tract 1000 00 to 1999 99 Census Tract 2000 00 to 2999 99 3000 Census Tract 3000 00 to 3999 99 4000 Census Tract 4000 00 to 4999 99 5000 Census Tract 5000 00 to 5999 99 6000 Census Tract 6000 00 to 6999 99 7000 Census Tract 7000 00 to 7999 99 E 8000 Census Tract 8000 00 to 8999 99 9000 Census Tract 9000 00 to 999 99 Grouped codes are displayed to the right Press to display codes added to the group See Setup page 20 for an illustration of groups adds it to the new group Setting Up Lookup Codes 21 22 Codes are listed as they are grouped in the top field Group names are displayed in the These are all the available groups area Select the group to add the code to Add groups and move codes until each group includes the codes you want to associate with it Press Close when you are finished and the lookup codes will be grouped as you have specified In the example below groups were added to census tract codes for numeric ranges Lookups This is the way yow lookup entries are cunently grouped Highlight the code s to add to a group in
307. y contact information can be used to complete incident involvement records 109 110 Adding Occupancy Records Occupancy records include basic occupancy information including address building information and contacts inspections and activities and additional information including related records notes and attached files Creating Occupancy Records You should add occupancy records for every property that your department inspects or builds preplans for To Add New Occupancy Record From the File menu select the Occupancy Management option Occupancies and Preplans option Ifthe Occupancy form with the last modified record is opened press New or Ctrl N to add a new record Ifa blank Occupancy form is opened you are ready to enter a new occupancy Ifthe Query form is displayed press Cancel to add a new record Type a description of the occupancy in Occupancy Name Type an Occupancy ID or if autogenerate IDs is enabled in Administration Options press Tab to let the program assign an ID Occupancy ID is used throughout the system to identify specific occupancies Type or look up a valid station code for the Station that would respond to an incident at this occupancy O These fields can be helpful in generating specific reports For example if you add station information to each occupancy you can run the Occupancy List by Station report Lookup Codes Enter or lookup a Property ID Th
308. y in the Summary area lists the total number of items added minus the total number of items used in usage purchasing detail records Save and close inventory record About Linked Inventory Linked inventory is generic equipment that is physically located in an inventory record To Add Linked Inventory From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option Apparatus Equipment and Inventory Ifthe Inventory form is displayed press Browse or Ctrl O select record and press OK Ifthe Query form is displayed select record and press OK Click Linked Inventory tab Press Add Type or lookup Generic Inventory ID Only inventory records marked as Generic Equipment indicated on the Inventory form Basic section in the Miscellaneous area can be added Save when finished Save and close inventory record To Review Equipment Hierarchy From the File menu select the Apparatus Equipment and Inventory option Apparatus Equipment and Inventory Master Records option Ifthe Inventory form is displayed press Browse or Ctrl O select record and press OK Ifthe Query form is displayed select record and press OK Click Linked Inventory tab Press Equipment Hierarchy A tree view of linked equipment is displayed with the Linked to Inventory ID equipment listed at the top if any and generic equi

FH User Guide - FIREHOUSE Software

Contents

Download Pdf Manuals

Related Search

Related Contents