Network Video Recorder User Manual 20140710
Contents
1. Process Set the alarming time linkage and the handling method Area Set The function should be set in NVR User Manual the remote IPC Linkage Set When a alarm occurs you can set linkage of records PTZ touring and snapshot Motion Detect Process Motion Detect Linkage Setting Alarm Out Linkage Record Snapshot PTZ Linkage Tour Send Email Show Message Buzzer Cancel App Default OK Cancel App 6 6 2 Alarm input Enter main menu alarm alarm out ALARM Detect Alarm Input Alarm Out Alarm Input Channel No 1 Enable Type Process Linkage Set Preferences Start 6 6 3 Alarm out teli Copy M Normal Open Setting Setting Default Cancel ALARM App Alarm input channel No Select a channel Enable Select it Type Normal Open and normal close Detect Alarm Input Alarm Out Channel Alarm port er Auto Alarm output is determined by the M iM iM ENENE OOO Alarm Type MA alarm output menu while in auto mode Stop Manual Alarm output is on and the status ani is active Stop Alarm output is off and the status is inactive Status Current status of alarm output Default OK Cancel App Note Some models have no local alarm please refer to the products descriptions 6 7 System 6 7 1 Base System Time DST Date Format Date Separator Time Format Time Zone Language DVR No Video Standard Auto Logout Channel Mod2. Playback control stop play pause fast slow previous next frame when in pause mode Recording 4 d Choose searched recording mode including NORMAL ALARM amp MOTION mode Choose searched channel Choose to play the previous or next file choose to play the previous or next channel Choose the start time channel click search and a list will display the results to choose a backup file in the file list box click the Backup button to cancel a backup file click v from the backup menu V The search list displays up to 128 video recordings Choose a file and press enter or double click with the mouse to view a recording File types R normal recording A alarm recording M motion detection recording NVR User Manual Playback Control During playback pressing this key Video playback allows you to Fast Forward with a Fast Forward button number of speeds to choose from The gt gt Fast Forward button can also be used as a reverse of the Slow Motion key During playback pressing this key Actual play rate is based on provides a variety of slower playback the version being used Video playback speeds to choose from The Slow Slow Motion Key 4 Motion key can also be used as a reverse of Fast Forward Play pause can also switch to normal Play pause gt Il speed from slow motion playback Backward Moves the video playback a single To go backwards single click Backward Key 4 frame
3. Stop Alarm output is off and the status is inactive Status The current status of alarm output Notice Some models don t have thelocal alarm please refer to the products descriptions 5 8 2 Alarm Configuration Detect Enter main menu detect ALARM Detect Alarm Input EG Channel Select the channel nee Alarm type Dynamic monitoring video loss anne Alarm Type Motion Detect and video blind can be selected Enable Y Sensitivity Middle Set Area Setting Ed Open the enable switch Process Setting niti ANE rice Sat so Sensitivity Set sensitivity of the network channels Set area lt should be set in the IPC Preferences Start Copy Default OK Cancel App Process Click the button to set the alarming time linkage and the handling method Motion Detect Process 06 09 12 Period 1 Period 2 Period 3 Period 4 Period 5 Period 6 _ Select All Sun Mon Tue Wed Thu zu Sat Cancel App OK Cancel App NVR User Manual Linkage Set When produce an alarm you can activate the linkage of records PTZ touring and capturing Motion Detect Linkage Setting Alarm Out Linkage Record Snapshot PTZ Linkage Tour Send Email Show Message Buzzer A a ESA Default OK Cancel App Alarm Input Enter main menu alarm alarm input ALARM Detect Alarm Input Alarm Out etec arm Inpu arm Ou Alarm input channel no Select a Alarm Input Channel No 1
4. Automatic Configuration La NETWORK Base Advanced Net Apply Network Card Type LAN DHCP Obtain IP Automatic Configuration IP Address Subnet Mask Gateway First DNS Server 8 Alternate DNS Server 8 8 4 Physical Address e0 61 b2 13 86 d5 Default OK Cancel App Step2 Go back to LIVE window right click USB mouse and choose NET Channel Management NVR User Manual View 1 View 4 PTZ Color Setting search Record Alarm Output MET Channel State open upnp Main Menu Step 3 Choose ONVIF in the Filter option NET Channel Management VA PD I I TEN EAER A NA VAA RAVE ESAO AN AE EAA The equipment has been added aaa Chn Delete FrontSet o BatchDelete HandAdd Status Network equipment online ID IP DoMain Protocol Port WebPorDevice Type Add NETSet gt Filter ONVIF x Search PING BatchAdd Right there on the channel shortcut configuration NVR User Manual Step 4 Click Search to search the connected IPC NET Channel Management The equipment has been added ee chn IP DoMain SET Status Delete e Front Set BatchDelete Ha bial status IP DoMain Protocol Port WebPor Device Type Add NET Set 192 168 100 230 ONVIF 5000 NVT admin 192 168 100 232 ONVIF 3000 NVT admin 192 168 100 243 ONVIF 8000 NVT admin 192 168 100 249 ONVIF 000 ones NVT admin Net atwo fork equipment onl vit ne DRE Filter ONVIF s Search PING Bat
5. Download Type Fie x Download lt E B 211901 2012 01 04 10 10 32 2012 01 04 10 39 48 EF E E ESEE CET E 2012 01 04 16 4 20 2012 01 04 16 5 38 bar 2012 01 04 16 5 48 2012 01 04 16 6 41 2012 01 04 16 10 15 2012 01 04 16 12 12 2012 01 04 16 12 17 2012 01 04 16 14 3 2012 01 04 16 17 20 2012 01 04 16 17 45 2012 01 04 16 18 32 2012 01 04 16 19 2 2012 01 04 16 19 8 2012 01 04 16 19 24 2012 01 04 16 19 29 2012 01 04 16 20 57 2012 01 04 16 21 34 2012 01 04 16 21 56 2012 01 04 16 23 35 2012 01 04 16 29 29 2012 01 04 16 37 44 2012 01 04 16 53 25 2012 01 04 16 54 34 2012 01 04 18 0 0 IH ne WON TAH bw Jl pod pod Hi Hi Hi Hi Hi Hi Hi Hi Hi Searching 7 1 8 Alarm Configuration Click the Alarm to enter the alarm setup menu users can set up and operate the alarm mode Operation External Alarm can not open video MT video Loss T External Alarm Listen Alarm Video Pop up Prompt Motion Detect Disk Full T Disk Error F Sound Pop up IT Video Mask Sound Path A m Alarm Sound Alarm configuration Choose type of alarm on menu monitor video loss motion detection disk full disk error video mask external alarm Click Video Pop up open the video loss motion detection hard disk full hard disk failure video block video encoder alarm pop up linkage Click prompt open the prompt When an alarm occurs in real time monitoring will popup alar
6. IP Port Protocol Device Type 10 12 1 64 8000 TYPE 1 DYR 10 12 1 104 8000 REV DVR 10 12 1 114 8000 TYPE 1 IPC_3507_720p 1012 1 115 8000 TYPE 1 IPC 3516 1080p 12 1122 8000 TYPE 1 ZL IVA BZS 10 12 1 123 8000 TYPE 1 ZL IVA FACE 10 12 1 141 8000 TYPE 1 ZL IVA FACE 10 12 1 160 8000 TYPE 1 ZL DVR 9016 10 12 1 170 8000 TYPE 1 ZL DVR 7108E 10 121 175 8000 TYPE 1 ZL DVR 7116E slaj e le Es us en n TVDC 1 7I MD er TYPE 1 Search 90 00 ON Eh Y MN 6 3 Record Basic E RECORD A Video mode Record automatically manually or not record Record Mode Setting a Recor Eros U Video expiration time The figure is Record Packed Time 60 between O to 365 HDD Full Loop Coverage s s Video package time The figure is Record Redundancy between 5 to 120 PreRecord 4 Second HDD full Overwrite or stop recording Channel Select a channel Channel 1 Default Cancel App Video redundancy Open or close the redundant recording Prerecorded The figure is between 0 to 30 NVR User Manual Record Plan E RECORD Basic Record Plan Channel Select a channel it uses Channel 1 green yellow and red to showmotion 00 06 l detection alarm and regular records correspondingly Copy Copy the settings to other channels Regular Mi MD Alarm Copy Default OK Cancel App Click the set button to enter the following interface Record Type So me Time Recording time 6
7. MENU LOGOUT SHUTDOWN RESTART SYSTEM NVR User Manual 5 2 Preview and Login in 5 2 1 Preview After the device is turned on you will enter the real time monitoring interface Right click and the following interface will pop up Not Set Not Set 2012 10 16 19 39 21 View 1 View 4 P T Z Color Setting Cam 01 A Search Not Set Record Alarm Output NET Channel State NET Channel Management open upnp Main Menu 5 2 2 Login In Click the image above with main menu and then input the user name default admin and the password of the NVR default 123456 to complete the login system Login UserName admin Password seeeeese OK Cancel 5 3 Mode Switching The device can work in hybrid mode or NVR mode Hybrid mode can be connected with both analog cameras and network cameras while NVR mode can only support IP cameras Enter configuration system channel mode to select the mode Restart to complete the setting NVR User Manual BASICAL Channel Mode system Time 2013 03 07 12 00 02 2 Local Net Decode Power DST C l 0 16 16xD1 9x720P 4x1080P 2xD1 6xCIF 8 8xD1 7x720P 3x1080P Date Format YYYY MM DD Date Separator Time Format 24 HOUR Time Zone GMT 08 00 Language ENGLISH DVR No 8 Video Standard PAL OK Cancel Auto Logout 10 Channel Mode Set Default OK Cancel App 5 4 IP Camera 5 4 1 Add IP Camera NVR add IPC have two patterns one way is a key to add UPNP the
8. aa 27 ARA A a Nt eee a uiiE 28 NVR User Manual OPRECI A O a 28 64A NEIWO rra AA A eras 29 OS PIZ ConijeuUra ON ae a a ee a ed ea a ee 31 Nros 31 OO Video Detecta dal dad dida 31 6 6 2AlafM INPUT Aa 32 003 Ala MCU AA 32 INS 33 A A nn dd weata ddan E EA E ven ae 33 6 72 DIS AV re E vows ucan a o A ai A Cro edi 33 A o NE A A O RN cate 34 O ODNO V a a SN A ee neke 35 Stat dit AA A ET EE a E EEA 35 6 7 SMalnNlal sin TE ee Sa a eS RS hs BS EKETA 35 AO EO A O A 36 TS A A A PE A RO AA A A NR A a 37 INE AN CIS Et RAS a a rr Tree 37 1 WED Opera ON bej olje ae o ja torus conte a dio ele 37 TAL NetWork CONMCCH ON ds 37 7 1 2 The control installation and the user login logout 38 7 1 3 The Interface of Web OperatiONS cccccoccccncnononcnnnonanonncnnnnonanonononanonnnonannnnnnnnnnnnnoos 39 7 1 4 The Real time Monitoring ci its 39 7 An PZ CONTO aa 41 Zelo COMES UPAR OM eet rado dde 42 TAG SCALE iin ROC A AN NO ANN Ne RI 42 7 1 8 Alarm Configuration cria ea ATEA 43 1 ASA o YO A ON 44 7 2 WINS CER Operations 44 NN aba RO 44 8 1Expanision TUACTION in vanes a a a ea iii anna 44 9 11 DDNSRUNEMO Ma o o E a mans sem tena Na a mee eee 44 812 PIZ CONE OM A oo PE o OO ei Pe ene an a ete 47 8 OHDD Capacity Calculati ON a DN 48 8 2 1 Reference of HDD Capacity Calculation coccoooocncncnnononnnnnnnonanonononanonononanonoss 48 Ou Dra did disk POD Mi AS 48 8 3 Common id ada
9. for DOS CD Data Lifeguard Diagnostic for Windows Diagram 0 3 WD Download b Click Icon to hard disk detection after downloading c Double click hard desk in device list as Diagram 0 4 WD Detection te DLGDIAG Select An Option Physical Drive 1 Model Number WDC WOS200S4K 001 040 Seral Number WO WCAYUS 90330 QUICK TEST performs SMART dive quick self test to gather and verity the Data Lifeguard information contained on the drive QUICE TEST Diagram 0 4 WD Detection NVR User Manual 8 3 Common Faults NVR startup failure or continuously reboot Possible reasons 1 The system has been damaged from a bad NVR update 2 There is a problem with the NVR main board error please contact supplier 3 There isan HDD error Replace faulty HDD Remote control does not work Possible reasons 1 Check for batteries in remote control especially positive and Negative 2 Check for batteries power 3 Check if remote receiver is obscured 3 Check if NVR address corresponds to the remote address NVR cannot control PTZ Possible reasons 1 RS 485 cable connection error A B ports are inversely connected 2 PTZ decoder protocol baud rate address are incorrect 3 Parallel connect a 1200 resistance to resolve signal reflex caused by too many PTZs on the line 4 TheRS 485 onthe NVR is defective Blurred screen in preview mode Possible reasons Please make sure your cameras match your video format selected in the General
10. holes on the hard disk with the mounting holes in the bottom of the NVR Use the supplied screws to fasten the hard disk to the NVR s metal frame by inserting the screws from the outside of the NVR through the housing and then screw them into the hard disk s mounting holes To avoid undesirable results it is important that the hard disk be securely mounted to the NVR 3 Connect the power and data cables from the NVR circuit board to the hard disk The connectors are of different sizes and are keyed for easy and correct placement 4 Replace the NVR outer housing and secure it with the housing screws Note The capacity of the hard disk determines how much video can be recorded to the hard in addition to whatever NVR parameters recording or encoding setup have been set to make the recording Refer to section 9 3 in Chapter 9 of this manual for more information 4 3 System Installation Preparation Before you integrate the NVR into a complete surveillance system you will need to assemble all the necessary components and connecting cables These include IP cameras with their power adapter s and network cables RJ45 connector a router or switcher to connector IP camera and NVR a video display monitor to display the camera video feed and connecting cables for all devices Connecting the NVR to a System To connect the NVR to the other components in a surveillance system you will need to do the following Place the NVR on a flat sta
11. menu E g camera is NTSC standard but the NVR is PAL standard the preview would be blurred Blurred screen in playback mode or failure to playback records Possible reasons 1 Procedure error reboot the NVR 2 HDD error test or change out the HDD 3 NVR hardware failure contact your local supplier Fail to connect NVR through network Possible reasons 1 check the physical network connection is correct 2 check the NVR network configuration parameters 3 check whether IP conflicts exist in network Download records can t be played Possible reasons 1 Player installation error 2 The USB or HDD device has an error 3 Do not install graphic software later than DX8 1 Internet Explore Crash Possible reasons Close IE explore enter into the tool bar NVR User Manual General Security Privacy Content Connections Programs Advanced Settings E Do not save encrypted pages to disk a E Empty Temporary Internet Files folder when browser is de Y Don t checked 1 Use TLS 1 0 Use TLS 1 1 E Use TLS 1 2 Y Warn about certificate address mismatch Warn if changing between seare adnot acare mode 4 HI Takes effect after you restart Internet Explorer Reset Internet Explorer settings Resets Internet Explorer s settings to their default You should only use this if your browser is in an unusable state x Diagram 0 4 IE tool bar Internet Explorer 9 0 Poss
12. other way is manual bulk adding mode When use UPNP function to add IPC The equipment has been added menu Chn IP DoMain and show the IPC MAC address When use manual bulk adding mode the RJ45 port of NVR should connect the router or DHCP server and make sure the router or DHCP server can distribute IP address to NVR and IPC 1 Akeytoadd UPNP Step 1 After the device is turned on choose open upnp Enter the user name admin and password 123456 Click OK View 1 System Login View 4 PTZ Color Setting User Name admin Search Record Alarm Output NET Channel State NET Channel Management Main Menu Step 2 System prompt UPNP is turned on it will automatically turn off after 10 minutes Click OK system will automatically add IPC to all NVR channel Right click USB mouse NVR User Manual choose NET Channel Management then you can find the added IPC information on the equipment has been added NET Channel Management rotocol Status Delete Edit Front Set 00 2a 2a 4a 07 11 ONVIF 00 2a 2a 4a 07 41 ONVIF 00 2a 2a 4a 07 50 ONVIF 00 2a 2a 4a 07 2b ONVIF BatchDelete HandAdd Status one Filter ONVIF Search PING BatchAdd Right there on the channel shortcut configuration Remark Status bar show green icon that means the IPC have been connected successfully 2 Manual bulk adding mode Step 1 Please check NVR menu DHCP option is checked and prompts obtain IP
13. periods can be Period 1 00 00 24 L set every day Period 2 Period 3 Period 4 Period 5 Period 6 Normal Normal record Moving Detection Moving detection WOOO Alarm Alarm record SelectAll Sun Mon Tue Wed Thu Fri Sat Cancel App 6 4 Network Base NETWORK Base Advanced Net Apply DHCP Enable the NVR to obtain an IP Network Card Type LAN address automatically If it is enabled the DHCP El NVR will reboot and search for a DHCP IP Address 10 12 Subnet Mask TR server and then assign a dynamic IP Gateway LE address The dynamic IP address will be displayed in the menu Enter a static IP Alternate DNS Server 192 168 1 0 1 First DNS Server INA E 1 Physical Address E0 61 B2 00 4B 8A address if there is no DHCP service available If you are using the advanced Default OK Cancel App feature PPPOE then the IP mask gateway and DHCP are unable to be changed IP Address Use A Y or input numbers to modify IP then set subnet mask and default gateway for this IP First DNS Server DNS server IP Alternate DNS Server DNS alternate IP NVR User Manual Physical Address physical address of current net port Advanced NETWORK Base Advanced Net Apply TCP default 8000 variable ee HTTP default 80 TCP Port UPNP Port Mapping UDP default 8001 HTTP Port No UPNP Port UDP Port Multicast tick Multicast and set a Multic
14. then presses Enter as the Diagram 0 1 DNS shows c C WINDOWS systen32 E Microsoft Windows XP Version 5 1 2600 lt gt Copyright 1985 2861 Microsoft Corp CisDocuments and Settings Administrator ping zenomdBA2 vssip net IES SS IEA TN E E A A 32 bytes of data Reply from 123 157 155 186 bytes 32 timetims PA Reply from 123 157 155 186 bytes 32 timetims TTL 128 Reply from 123 157 155 186 bytes 32 timet lt ims TTL 128 Reply from 123 157 155 186 bytes 32 timetims TTL 128 Ping statistics for 123 157 155 166 Packets Sent 4 Received 4 Lost B Bx loss Approximate round trip times in milli seconds Minimum Bms Maximum ms Average Ams C Documents and Settings Administrator gt Diagram 0 1 DNS The computer will analyze the domain name which is set in the NVR and return to the current IP as the picture shows underlined in red When the IP correspond to the embedded NVR s IP in Public internet it means the DDNS is setting right If they are not please check the network connection of embedded NVR and DDNS information Port Mapping Port mapping is mapping a port of outside web host s IP address to a machine inside web and provide the service When user connects to the port of the IP the server will automatically map the request to the corresponding machine inside LAN With the function of port mapping we can map many ports of a machine s IP address to different machines different ports inside web Th
15. 100 232 ONVIF E k 192 168 100 239 ONVIF 192 168 100 249 ONVIF BatchDelete HandAdd Status IP DoMain Protocol Port WebPor Device Type Add WET Set 192 168 100 230 ONVIF 8000 NVT admin 192 168 100 232 ONVIF 8000 NWT admin F 192 168 100 239 ONVIF 8000 NWT admin T 192 168 100 249 ONVIF 8000 NWT admin Filter ONVIF x search PING BatchAdd Right there on the channel shortcut configuration Remark Status bar show green icon that means the IPC have been connected successfully NVR User Manual 5 4 2 Status Display Right click in the real time monitoring screen and select net channel to view the status of the network channels NET Channel Chn NO Network State Resolution Frames Bitrate Kbps 1 OK 1920 x 1080 30 3692 2 OK 1920 x 1080 30 3568 3 OK 1920 x 1080 30 2889 4 OK 1920 x 1080 30 3939 5 5 PTZ Control When connect with a network ball right click the corresponding network channel and select PTZ to enter into thePTZ interface lf access to a simulated ball machine enter Main Menu PTZ to modify the PTZ protocol the baud rate and address bits Then right click in the corresponding channel and select PTZ The PTZ control interface is shown as the following interface Preset Tour Pattern Preset Add Preset Delete Preset Preset Refer to 8 2 about more details NVR User Manual 5 5 1 PTZ configuration The direction of PTZ steps zoom focusing iris prese
16. 28 26 30 31 32 Vew 1213141516 7 3 View 9 1121314 View 16 OB View 36 a Motion Tour View 1 Alarm Tour View 1 Default OK Cancel App NVR User Manual Setting tour mode and interval between rotation the time is within 5 120s the mode include single screen four eight nine sixteen screen Motion Tour Type Set the motion detection tour mode Alarm Tour Type Set the alarm tour mode Note Shortcut Setting click the button at the top right corner of the monitoring picture or press the Shift Key to switch you can control the tour 6 7 3 Storage HDD Management STORAGE HDD MANAGE HDD Record BACKUP All Type Total Space Status All 0 00 MB PageUp PageDown HDD Record HDD MANAGE HDD Record Format It is possible to format an individual HDD LM note Hard disk format operation result in the loss of video data Set Set HDD as read write read only or redundancy mode In read only mode video data cannot be covered STORAGE BACKUP il Start Time End Time All 2001 02 12 19 29 22 2013 03 08 11 18 48 iii 2001 02 12 19 29 22 2013 03 08 11 18 48 PageUp PageDown NVR User Manual Backup Connect an External USB device with the USB port to backup in the Record Backup menu _ a STORAGE Sen HDD MANAGE HDD Record abai Detect Identify external USB device and 0 Name Type Free Total Device Status display the device informat
17. All Start Time 2013 End Time 2013 137 129 130 131 132 133 134 135 136 137 PageUp 6 7 7 Log Time 13 03 07 11 46 59 13 03 07 11 47 33 13 03 07 11 47 33 13 03 07 11 48 02 13 03 07 11 48 03 13 03 07 11 48 44 13 03 07 11 48 45 13 03 07 11 49 07 13 03 07 11 49 08 Account PageDown MAINTAIN DEFAULT MAINTAIN 03 07 00 00 00 03 08 00 00 00 Search Event lt admin gt User Login lt admin gt User Logout lt admin gt User Login lt admin gt User Logout lt admin gt User Login lt admin gt User Logout lt admin gt User Login lt admin gt User Logout lt admin gt User Login MAINTAIN Eole INFO DEFAULT Equipment Name AAAA Serial No Product Type Build Date System 6 15 Web Video In Audio In Alarm In Alarm Out Upgrade Default OK NVR User Manual MAINTAIN 000000000000000000 2013 02 18 1 2 16 395 4 3 LM note Group and user names can be from 1 6 characters in length Valid characters include letter numbers and limited symbols underline subtraction sign dot you may not use a space as a leading or ending character There is no limit to the number of groups or users By default there are two different group levels admin and user User management determined upon two levels the group and the user level Group and user names cannot be duplicated and each user can only belong to one group ACCOUNT User Group admin admin user user default user Add User Modif
18. Enable DDNS CN99 DDNS Coon go Z NVR User Manual Username XXX Password XXXXXX After setting up the information as above you can access the Embedded NVR via XXX 3322 org Notice The main machine s IP should refer to the information of the website NO IP www no ip com Register Register new username at no ip click Create Account Create domain name click AddaHost Embedded NVR Setting Open Main Menu gt Management gt Network gt Advanced gt DDNS gt Enable ed erop rot JJ E Dyndns DDNS www dyndns com Register To login at dyndns register an account Click on the confirmation link login the account click Add Host Services at My Services set your own realm name and then operate according to the procedure Configuration of the Embedded NVR Open Main Menu gt Management gt Network gt Advanced gt DDNS gt Enable id Membersdyndnsote per JIH JJ Domain name XXX XXX COM Password XXXXXX Test and verify DDNS After setting the Embedded NVR wait for a few minutes analysis records will update Click Operation in the Menu of computer input cmd click OK to open a window As the Run Command Line Program shows NVR User Manual Gy E la x Microsoft Windows XP Version 5 1 26661 lt C gt Copyright 1985 2881 Microsoft Corp C Documents and Settings Administrator gt Run Command Line Program Input ping Domain name
19. Network Video Recorder User Manual 2014 7 NVR User Manual Content A MONS aa ETAT spaced visas o a A eao ETE 4 DDS Chere o O TO A RO ua 4 BS PhOGUEE Ii PEO COUCH O jane nda ld tada dida ds 4 3 1 PrOdUCEOVEVIE WA 4 FFEA E naa tate O NO 4 a Se e E a E a a EEE NR A Pi a E MA PA 5 A a A A a ee 5 42 Installation Prepara Ai 5 AS Installation of the DUrNEH A cd 5 AA NE FONE PANE ana A ob vi vejah th anni 7 o ea A e ee a ea ene ea A OAE 9 4 5 INe Alarm Cable uiti tas 11 AF INECONNECU ON OF POE nanara ee A AA 12 5 Ba i Operations GUIAS ita idad 12 Dy POWER Onan OR a DAS A A AS IR 12 Dial POWEC OA aries 12 Dd 2POWEP OT a Aa 12 S2 PECVICW AMG LOEN IM ne aa a ne re ad a jedel 13 A ed ee ee adj ne ee rano ane aa kalni 13 Di ZZ LORI IA za ana Na NAS a ja Ke o ep ES 13 5 2 WMOGe SWITCHING ads A 13 EDGR O O O ERA O TE A A A 14 A A C INET A TAN 14 SA 2 SLALUS DIS 19 SS PIZ CONTO Aid 19 Decl P IZ COMM CUA ON Adidas 20 Bir 8 ad doc a a EN EEA a a PRA MIR V a ma 20 BG Aa A O AE AE PARNA PO AN OE AR 20 S7 pe o A A A RA A ET O PE 20 A A A EO RON OO ER MANE TE a ie 23 Do Aaa OU DU a ia Na A ena ads 23 5 0 2 Alarm Configura ON a 23 DO AA MOSTA US ana a a ete eve 24 59 COMO e TUNE iia indi 25 SLOTS MPU IVICTIOG iaa dad dit di 25 o Parameter TN 26 6 LIATFOGUETION OF Main MENU aaa A 26 K WIG Or e INE Snr EN PE EJ TE twat A EO A a A ME NA 26 SA A a S a A E o vaj el E vak 26 6 2 2 ENCOGING SEINES ii a EEE 27 Od Na PS Oi
20. Preset Input the preset point and click the preset button to call the function Preset Tour Input the number and click tour to Tour call the function Pattern pattern Input the path and click pattern to call the function Click el to switch to the interface of preset or pattern Preset Choose preset and input a figure in the input box Click Add Preset to save Or input the desired preset value in the preset Add Preset Delete Preset input box and click delete preset to delete Preset Preset NVR User Manual Pattern You can begin the desired path or end a path by filling the figure in the box Pattern 8 2 HDD Capacity Calculation 8 2 1 Reference of HDD Capacity Calculation The first time install NVR please check if the HDD has installed The capacity of the HDD There is no limitation of capacity of single HDD to NVR please choose the HDD according to the saving time The choose of the Capacity Computational formula of HDD Capacity Whole HDD Capacity number of the channels x time in need hour x spent of HDD Capacity per hour MB hour Similarly we can have the formula of recording time Recording time hour A a a pa A CapacityOccupationperHour MB hr x Amountof Channel ZA note 1GB 1000MB not 1GiB 1024MiB so HDD capacity shown in Base Configuration under HDD Management less than real marked File size per hour CBR Form 0 1 record file size File size
21. ality video image This NVR supports synchronized video and audio recording playback and monitoring This series also supports network based system control as well as excellent network streaming capabilities 3 2 Feature Real time monitoring Have a composite video signal interface and support CVBS VGA or HDMI output simultaneously Compression function Use H 264 video compression standard and G 711 audio compression standard and have high NVR User Manual definition low code rate of the video coding and the storage Recording function Support timing linkage alarm motion detection SATA hard and local hard disk NVR data backup and network backup Video playback function Achieve searching videos by a variety of conditions playback in local and network Support multiple videos playback fast playing slow playing and frame by frame playback Video playback can display the exact time of the incident Provide timeline retrieving page for quick searching Camera control and alarm Be controlled by the remote camera and equip many alarm input interfaces Be connected to various types of alarm devices Dynamic detection video loss video block multiple alarm output and scene lighting control can be realized Communication Interface Equip USB 2 0 high speed interface or ESATA interface and allow many backup devices Equip standard Ethernet interface Plug and play in a variety of network conditions Network functions Suppor
22. ast Set group in Set IP should be limited as IP Address follow picture port no limit Port Default OK Cancel App Net Apply NETWORK Advanced Net Apply setting Setting Setting setting IP Filter setting Net Transfer Ability Setting Alarm Server setting Cancel DDNS Enable the NVR to registered a DDNS hostname which runs on a fixed IP address webclient Select DDNS type NO IP DDNS Dyndns DDNS FNT DDNS and so on Input the registered server s IP port username and password Once completed you can login in the Web client by inputting the domain name in IE Refer to 6 1 about more details Email Enable the function Set the SMTP server s port username password the sender s mailbox and receiver s mailbox FTP Choose to upload records or images Set FTP server s IP address and port Default 21 Create a account in FileZilla Server in the computer Fill in the username password and remote directory which have been created Set file length channel time for recording type and date and so on Tick alarm motion and general records or images to upload NTP On Off NTP The network time protocol allows the NVR to sync with NTP server time automatically Server IP Input IP of NTP server Port The default port is 123 NVR User Manual Update cycle The interval time is between 1 to 65535 min IP Filter NVR authority management If you enable the white list only the filled IPs can
23. backward again To stop backward play during normal playback press Advance video by a single frame Rewind or single frame Manual single frame Na d forward or back by clicking either lt advance Press the play advance or gt when video is paused button P Il to resume normal playback Note 1 The NVR playback control bar shows file playback speed channel time playback progress and other information 2 The playback speed and rewind functions can differ between NVR versions Please check the NVR version you have in order to ensure successful operation 5 7 Record In real time monitoring screen right click and select record to enter the interface Manual Record Record Mode All 1 2 3 4 5 6 8 9 101112 13 14 15 16 Schedule O M MMM ME Mm EE E E 64 E El UY Manual al nN a ao Stop Ej aas 1 a E e EI OK Cancel Manual It has the highest priority and corresponding channels will record for whole days after chosen Schedule Record according to recoding configuration Stop Stop recording NVR User Manual 5 8 Alarm 5 8 1 Alarm Output This menu manages alarm output parameters and displays the current state of alarm ALARM OUTPUT Channels The number of channels that are in Alarm Type 1234 alarm status schedule k bA LA ba Schedule Alarm output is in control of alarm lb hat configuration Stop ajajara Statue Manual Alarm output is on and the status is active OK Cancel
24. be connected This system supports a max of 64 IPs NTP On Off NTP The network time protocol allows the NVR to sync with NTP server time automatically Server IP Input IP of NTP server Port The default port is 123 Update cycle The interval time is between 1 to 65535 min IP Filter NVR authority management If you enable the white list only the filled IPs can be connected This system supports a max of 64 IPs Network Transmission Transfer modes and the number of network connections downloads Alarm server reserved interface 6 5 PTZ Configuration Confirm the connection of PTZ A B lines in the NVR and PTZ Channel Protocol Address Baudrate Data Bits Stop Bits Parity Copy Default OK Cancel App Data Bits default 8 Stop Bits default 1 Parity default None 6 6 Alarm 6 6 1 Video Detection ALARM Detect Alarm Input Alarm Out Channel 1 Alarm Type Motion Detect Enable E Sensitivity Middle Set Area Setting Process Setting Linkage Set Setting Preferences Start Copy Default L channel Select the channel Protocol Select a associated protocol e g PELCOD Address Set address Default 1 Note this address has to correspond with dome address or the dome will not be controlled Baud Rate Select the baud rate Default is 9600 Channel Select a channel Alarm type Dynamic monitoring video loss and video blind pl Open the enable switch
25. ble surface and connect a network cable from the RJ45 network interface to a router or switcher Connect the IP cameras to the same router or LAN with network cables Connect the VGA or HDMI video output port to the system display monitor Connect the supplied USB mouse to one of the USB 2 0 ports on the rear panel of the NVR Plug in the AC power adapter into the power jack on the rear panel of the NVR NVR User Manual 4 4 The Front Panel e MERA EEE aan rala Y N Index Name Q REC 1 IP address of the device the clock the external alarm channel error status code of the machine remote address internal temperature of the chassis is displayed 2 Network Connection status 3 HDD status and numbers E and flash label refer HDD error 4 Cycling display the recording status and motion detection distinguish by REC and MOVE RO 1 2 Receive the remote control signal a Back to previous menu operation cancel SC Back to live view when playing back records e Up Down Move up or down Change the settings and increase or decrease Direction the digital Left Right Control the playback control bar of the records Confirm t
26. chAdd Right there on the channel shortcut configuration Step 5 Check the need to add IPC and click BatchAdd to add NET Channel ki de FPSS Status Front Set BatchDelete HandAdd Status ec quip omen it 01 nline e m z IE TP DoMain Protocol Port WebPor Device Type Add NET Set 01 192 168 100 230 ONVIF 8000 NVT admin iv 02 192 168 100 232 ONVIF 8000 NVT admin i 03 192 168 100 239 ONVIF 8000 NWT admin z 04 192 168 100 249 ONVIF 8000 NVT admin Filter ONVIF x search PING BatchAdd Right there on the channel shortcut configuration NVR User Manual Step 6 After to finish the add the menu the equipment has been added will show the added IPC list and information NET Channel Management T _ Chn IP DoMain Protocol status Delete Edit Front Set 01 192 168 100 230 ONVIF i ba i 102 192 168 100 232 ONVIF 5 03 192 168 100 239 ONWIF 04 192 168 100 249 ONVIF BatchDelete HandAdd Status N ID Protocol Port WebPor Device Type Add NET Set iz 01 192 168 100 230 ONVIF 8000 NWT admin iz 02 192 168 100 232 ONVIF 8000 NWT admin iz 03 192 168 100 239 ONVIF 8000 NWT admin iz 04 192 168 100 249 ONVIF 8000 NWT admin Filter ONVIF search PING BatchAdd Right there on the channel shortcut configuration NET Channel Management n IP DoMain Protocol Status Delete Edit Front Set 192 168 100 230 ONVIF 7 Pa 192 168
27. channel Enable Y Enable Select the enable switch Type Normal Open SEO i Type It can be normal open or Linkage Set Setting close Process and Linkage Refer to Detect Preferences Start Copy Default OK 5 8 3 Alarm Status If you select Show Message in linkage settings the following message will pop up when the alarm occurs Alarm Status Aamin EEC EC WE oaase Video Lost NUHOHOHUDUUDCLECZEOL Mask KEJ OJOJ OE CE 13 14 15 16 carac Motion 1 2 5 4 5 6 7 ARA depurar Net Channel 19 1969 21 22 23 212820 27 28 29 89 5162 Network Ml IP Conflict NVR User Manual 5 9 Color Setting Adjust the specified screen single screen image color hue brightness contrast saturation gain and white level parameters set two time periods according to the local environment difference between day and night for each adjustment period set the device will automatically switch to the best video quality Color Setting Period 00 00 24 00 00 00 24 00 Hue Brightness Contrast Saturation Default OK Cancel App Period Two periods can be set according to ambient light during the day and night device will automatically switch configuration time Need to select the Enable box Hue Adjust according to color cast of image Brightness Visual image brightness according to the environment reduces or increases the brightness of the image brightness to make the image relatively clea
28. e date BASICAL 2013 03 14 11 53 06 L YYYY MM DD NVR User Manual System Time Set the current time Anote Click to save the time modification TEIE Daylight Saving Time DST Click DST to GMT 03 00 ENGLISH Starting and ending time Date Format Modify the date display Set Default OK Cancel App format Time Format 24 hr or 12 hr display mode Language Select language enable the function and enter the local DST Date Separator Select the separator for NVR No Number more than one NVR click Ad button on remote control and input a number to select the corresponding NVR to operate Video Standard PAL NTSC Auto Logout This ranges from 0 60 minutes O means no setting NVR will automatically let user quit after standby time s vacancy Channel mode The selection of local channels and network channels 6 7 2 Display Output mode Channel Mode Net Decoder Ability 32 32xD1 18x720P 8x1080P OK Cancel DISPLAY GUI Output Mode Tour Config Output Port CVBS Hue Brightness Contrast Saturation Top Bottom Left Right Default OK Menu Transparency Adjust transparency VGA Output Select VGA resolution The default is 1024x768 060Hz Tour configuration DISPLAY GUI Output Mode Tour Config Enable Tour A Interval 5 sec View 1 11213 4 5 6 7 8 9 1011112113141516 Fi7 ta 19 20 21 22 23 24 25 26 27
29. e port mapping can also have other special agent functions like POP SMTP TELNET etc Theoretically it can provide more than sixty thousand ports For example if we want to map a web server which has an IP address of 192 168 111 10 we just need to input the IP address and NVR User Manual TCP port 80 into the port mapping chart of the router There are two ways to map the port UPnP function automatically map and modify the router s port mapping chart by manual Manual port mapping The first step Connect the Embedded NVR to the Router set the static IP The second step Log in Router enter into the configuration menu of Router and set the menu Then get to port set the IP distributed by the Embedded NVR and set the rule of port mapping add HTTP and TCP port into mapping list Default access ports of Embedded NVR include HTTP port 80 and TCP port 8000 if the ports are occupied by the other devices please modify the default port of the Embedded NVR into other vacant ports The third step Input the public net IP address in the IE and add the port number of the Embedded NVR you want to access after the IP for example http 155 157 12 227 81 If you want to access by Client Software you can use the outer net TCP port directly A Notice for detail configuration setting please refer to the user manual of Router 8 1 2 PTZ Control Right click and select PTZ in the corresponding channel The following interface will pop up
30. he operations 5 Enter Jump to the default button Enter the menu The button displays PTZ control and image color when in a single screen monitoring Simultaneously press the Fn key and the direction key to complete the settings with the dynamic monitoring area Press the Fn key to empty all contents of the edit box Press the key to switch between the digital casein English Chinese input Special with the function of each menu page prompts o B To connect the mouse and HDD O8 o ON OFF Power on off D70XX Series 7 NVR User Manual D60xx series Directional controls Up Down can jump up or down Activates the digital input box to increase or decrease a number Left Right Switches screens Enter Operation confirmation Switches to default button Menu configuration NVR User Manual 4 5The Rear Panel 4 8CH NVR with POE Rear Panel Interfaces 6 Alarm sa85 Pons Alarm input output and RS 485imteface 8 porpors Networkinterfaces with PoE funci n o Tre powerinnut The power input inerteca 7 1 2 3 4 5 6 Fi ta qy D70xx series 4 8CH NVR with POE Rear Panel Interfaces NVR User Manual 1 2 3 A 5 6 Fi 8 Su 6 3 1 2 4 HB z ss ca lip 16CH NVR Rear Panel Interfaces NVR User Manual T 2 T 3 L a MI ste aja u mea Darel s k eo reke snake C 32CH NVR 1U case Rear Panel Interfaces 32CH NVR 2U case Rear Panel I
31. ible reasons Internet Explore9 0 above version visit Please choose compatible mode NVR User Manual Appendix1 Remote control operation a gt a lt y o Y Item Name Function number Multi window button Split screens button Numeric button Code input number input channel switch Esc Exit button 4 Direction button Up Down Left Right and Enter Menu button 6 Record mode Enter short menu as record mode button EN Assistant function OU fo Search O Search record files to playback
32. ion Backup Tick the external device and click Backup 1 to enter the backup menu Select the record start stop time and click PageUp PageDown Select Cancel backup device or file Add Add files in list Detect Backup Erase Stop Tick the record you want and click Start to backup and display time remaining Delete delete all data in USB backup device Anote This operation probably cause permanent data loss 6 7 4 Abnormity ABNORMITY Disk low Space Alarm when hard disk Capacity is lower than setting No Disk Alarm when HDD is not present or can not be detected Abnormity Type HDD Low Space Less20 Alarm Out Setting Linkage Record Setting Snapshot CI MESAS Network Failure Alarm when network ses ae is not connected Buzzer O Process Mode includes Alarm Output Display On Screen and Send Email pushed to phone and recording linkage Default OK Cancel App IP Conflict Alarm when IP address conflict Process Mode issameas No Disk s Process Mode Disk Error Alarm when there is error in reading and writing hard disk Process includes Alarm Output show message Send Email linkage record snapshot and buzzer 6 7 5 Status You can see the BSP and on line users 6 7 6 Maintain You can see logs of the system product information default settings and maintain information in the following interfaces Hole Type INFO
33. is more unpredictable when VBR style please refer to the real size of recording file 8 2 2 Hard disk problem Use Detection Tool provided by the HDD manufacturer to detect the Function of HDD to solve data problem We recommend Seagate and Western Digital How to detect Seagate HDD NVR User Manual a Get into www seagate com Click Support amp Downloads choose Sea Tools download tool as Diagram 7 1 SeaTools for Windows SeaTools for Windows tests SATA USB 1394 ATA PATA IDE and SCSI drives lt installs onto your system SeaTools for Windows is completely data safe If the drive passes SeaTools for Windows your troubleshooting can move to other areas Go To Download See the tutorial Learn more Diagram 0 2 Seagate download b Double click to install downloaded file click installed file to detect the HDD information on PC c Choose the HDD for detection other manufacturer s hard disk suitable too How to detect WDC HDD a Get into www wdc com choose WD support download SATA amp SAS WD Caviar GP download software as Diagram 0 3 WD Download WD Support Downloads SATA amp SAS WD Caviar Green GP Downloads Vidal EJ SATA amp SAS O installation Downloads Y Knowledge Base Discussions Available Downloads Acronis True Image WD Edition Advanced Format Software Only for Windows XP users with WD Advanced Format Drives Data Lifeguard Diagnostic for DOS Data Lifeguard Diagnostic
34. m window menu Click Sound Pop up you can choose alarm tone pre recorded on the local hard drive when an alarm occurs tone file in WAV format NVR User Manual 7 1 9 About Please refer to WEB controls related version information 7 2 The Client Operations Please refer to description of IMS 200 8Appendix 8 1 Expansion function 8 1 1 DDNS Function FNT DDNS FNT DDNS is built in professional dynamic DNS service in our network NVR You can register directly in the device Specific steps are as following rx DDNS Select FNT DDNS and check Enable DDNS Type FNTDDNS x Enable Register Domain Name Input a username User Name 666xu 1 2 3 Input the password 4 Click the Registerbutton if the domain Password 200090 Server IP name is not registered it will pop up the Port message that connect DDNS server State Connecting DDNS server success successfully otherwise it will prompt OK Cancel App that the registration is failed 5 Click OK to complete the settings CN99 www 3322 org Register Register New Users or Login at www 3322 org Click My Control Panel at the navigation bar Click the left side new under the DDNS Fill in the name of the host machine IP address will automatically detect in the current internet Leave the Mail Servers blank and then click the OK button Embedded NVR Setting Open Main Menu gt Configuration gt Network gt Advanced gt DDNS gt
35. nterfaces The power switch The power switch 4 6 The Alarm Cable Examples of alarm input connections The alarm input is the switch quantity input If the alarm input signal is not switch quantity signal but voltage signal refer to the following connection Relays ALM ALM Examples of alarm output connections When the alarm output connect with DC and AC load please refer to the connection NVR User Manual DC load AC load DC N A JE 4 7 The Connection of POE Step 1 Supply the NVR with the 12V DC power Step 2 Connect the POE module with 48V directly power Note 48V voltage is not safe please pay attention to the use of electricity Step 3 The side of the network cable is connected to the POE network interface and the other side is connected to the network camera The distance of POE power i s not more than 100 m theoretically 5 Basic Operations Guide 5 1 Power On and Off 5 1 1 Power On Correctly install and power on the NVR When the power indicator lit up the NVR will automatically start NVR will automatically detect hardware state of the device during the starting The booting process will continue for about 30 seconds After boot the eguipment sounds and then enters the state of multi screen real time video surveillance 5 1 2 Power Off Press the power key for three seconds to achieve shutdown Enter the NVR s main menul shutdown and select shutdown SHUTDOWN
36. o NVR User Manual 7 1 5 PTZ Control Set protocol see Setting gt PTZ Control PTZ direction step size zoom IRIS preset tour pattern border scan light wiper auto pan etc Step size controls PTZ direction and speed e g step size 8 is moved faster than step size 1 Eight direction rotations up down right left up left up right lower left lower right Zoom Focus Iris No 1 255 5 Advanced Set PTZ control Border scan Operation select the camera line scan of the left right margin by direction button and click the Settings button in the left right margin position to determine the left border Preset Operation modify preset position by direction button and inputting a preset number then click Add to save Tour Operation select Tour Point between the first cruise line cruise input box value And input numbers in Path and preset Click Add Preset to add one preset in the cruise path and repeat to add additional presets Click Clear Preset to delete a preset repeat to delete more Pattern Operation Click Pattern in order to record an automated pattern Then go back to the PTZ controls in order to modify the zoom focus and IRIS etc Stop recording in Pattern setting to save the pattern AUX On off one of AUX Wiper On off wiper under protocol NVR User Manual 7 1 6 Configuration Access NVR local configuration menu by click System Setting the fu
37. ot PTZ control PTZ control menu System configuration record search alarm Menu i setting exit etc 7 1 4 The Real time Monitoring Into the WEB interface select the focus window in live window the focus window has a light blue border From the left channel column select channel as shown in the following interface CameralH Channel Choices NVR User Manual Click on 2 area in upper right corner can choose open close the channel of the main stream or secondary stream shows the current NVR s IP and rate information Stream Current channel 0 Kbps A11 2182 Kbps Ptz Stream information Lower left corner shows the current video channel name Upper right corner shows the current video time information Click V Lower left corner of the display window to switch between single screen and multi screen Lower right corner of the display window is function keys as the following interface Refer to area zoom switching multi screens local records capturing and so on More Rafts wh Function Key Function Key Co zoom Video images can be enlarged Bei tuiti screen switch switch from single screen to multi screen and vice versa Mz oc record save and record video to a local HDD while in a live view Set recording path in configuration al ture capture of the present channel set the path in other 1 B si Sound on off sound video off the focus window vide
38. otect your security Internet Explorer stopped this site from installing an ActiveX control on your comput Install This Add on for All Users on This Computer What s the Risk pe Information Bar Help m Username NI Password MS ER Y Done Internet Protected Mode Off Fa y Q10 v Login screen Install ActiveX Right click and choose install If installation is blocked by Windows please add the IP as a trusted site or lower your Internet Explorer security settings to allow this tu El mp Pages Safety Tools 7 Install This Add on for All Users on This Computer Whats the Risk Information Bar Help Install Control The following interface will popup when you input your username password and click Login Interface like Diagram 5 3 Web Interface when user login successfully Click Exit to quit NVR User Manual 7 1 3 The Interface of Web Operations Channel 2012 0 046T7 05 31 Camera 01 Camera 02 Camera 03 Camera 04 Close Al f Zoom Focus Iris No 1 255 5 Advanced Set SS e 230 OATES JO E3 QuE UA CTE CTE Z Color More WEB Interface Description l Local playback playback local record 2 Function key ON Open all play live views in surveillance window Surveillance window Change window layout Image color modify brightness contrast and Image color other 4 l Other set capture path record download path saturation and rebo
39. r Contrast Adjust image of black and white in proportion the greater ratio the brighter image Saturation Image color purity the greater value the more colorful images Gain Enlarge the image signal to improve signal quality White Level Change the white level reference value to improve the brightness of the image display A Note Only analog channels support the function 5 10 The Input Method In the input box you can select figures symbols English capitalization and the input of Chinese Click the mouse to complete the input represents the backspace and represents a Space 1120 4 5 M 8 q we rit yu io p ajsid f ghjj k shift z x c v b n m The input interface of Chinese NVR User Manual 6 Parameter Settings 6 1 Introduction Of Main Menu The main menu is shown in the following interface MAIN MENU Search Search records by types channels CA H z time and playback records bo a Video Set basic encoding snaps and net SEARCH VIDEO RECORD 8 p channels T 5 5 Record Set basic and record plan udi Z Network Set base advanced and apply SYSTEM SHUTDOWN network PTZ Set parameters of PTZ Alarm Set alarm information System Set basic display storage abnormity status maintain account and RS232 shutdown It includes menu logout shutdown and restart of the system 6 2 Video Settings This menu contains the basic video settings
40. rther details please refer Local operation guide Configuration MA Control Panel Ef Maintenance Ef VERSION Video In Dut Ef LOG Audio In Out Ef DEFAULT BACKU er plodne A a AUTO MAINTEN a if Config manage Bios Version 1 003 0000 2 Build 2011 11 14 Ez SETTING 3 6 Record Config BasicSet RecordPlan ag ACCOUNT a NETWORK Ea BasicSet AdvanceSet Ca ALARM Local Alarm DETECT Motion De Video Los Camera M ABNORMITY Refresh hy Peripherals Ca Alarm I O Config a Record x 4 m b Configuration 7 1 7 Search Record Click Search record to open the search interface 0R ATRAS HP can search and operate record alarm motion local record Search record By selecting the record type start and end times and click the check button get a list of files on the NVR Select the appropriate file and download can be played Play Double click a search result to play in video window Control the playing video by the control keys on the bottom At this point the bottom of the video window will display the video control buttons video playback can be controlled Download select a searched video to download to local The download speed and percentage are displayed on the bottom of the screen NVR User Manual Parameter Operation Begin Time 2012 1 4 9 49 37 _Search Playback End Time 2012 45 94 37
41. s 50 NVR User Manual 1 Precautions The following content is about use of the product the prevention of danger as well as preventing property from the loss Please be sure to comply 1 Please placed NVRs within the permissible range of temperature and humidity 2 Do not install the NVRs in a damp dust or soot place 3 Place the product horizontally and pay attention to preventing it from falling 4 Installed in a well ventilated place and do not block the vent 5 Do not place containers filled with on the device 6 Do not place other equipments above the product 7 Do not disassemble this product 8 Please select the hard disk recommended by manufacturers and suitable for the requirements of the NVR 2 Declaration Please prevail in kind The manual is for reference only This manual may contain inaccurate data or printing error The products described in this manual may be updated at any time Screenshots of the manual is not in a machine and only for display If in doubt obtaining a copy of the latest procedure or the additional document please contact with the company s after sales department 3 Product Introduction 3 1 Product Overview This Network Video Recorder NVR is an excellent digital surveillance product which uses H 264 video compression hard disk recording TCP IP transmission and a Linux based Operating System It also uses advanced technologies that produce a more stable reliable and higher qu
42. s fixed in Constant Bit rate Audio Choose channels record sound or not 6 2 3 Snapshot VIDEO Snapshot NetChannel Channel Select a channel Mode Trigger Crawl images when Basic Encoding Channel 1 Mode Trigger alarm sl le SE Image Size CIF capture Image Quality Normal aaron 2 SPL Image Quality There are 6 levels of quality Snapshot frequency set highest capture rate for single channel 1s pc 2s pc 3s pc 4s pc 5s pc 6s pc 7s pc 8s pc Copy Default OK Cancel NVR User Manual 6 2 4 Net Channel VIDEO Basic Encoding Snapshot Net Channel First open the enable switch Channels 17 NET Y OPEN Search Channel Select the desired channel Protocol Type ONVIF Protocol Choose a protocol supported Remote IP 10 12 27 223 Port 80 by IPCs o E Address IP Input the IP of the IPC Password 000000 Remote Detect Detect Port Input the port of the IPC Remote Channel 1 User name Input the user name of the IPC Copy Default OK Cancel App Password J Input the password of the IPC Detect After completing of the above settings click the detection button The dev ice will connect with the IPC and return the connection status Search Select a appropriate protocol and search Double click the search results and then the device will automatically be added and return to the network channel interface You need to fill in the user name and the password Search Device 123
43. t TCP IP UDP RTP RTSP DHCP PPPOE DDNS NTP etc Support real time network monitoring video playback control and management functions built in WEB Server you can directly access through a browser Mode of operation You can operate by the front panel or the mouse Equip a simple intuitive graphical interface 4 Installation 4 1 Unpacking Inspection When you receive a product check it according to the packing list inside the box 4 2 Installation Preparation Tools amp Preparation You will need a Philips head screwdriver and a hard disk drive to install inside the NVR housing NVR User Manual Hard Disk Specifications 3 5 inch SATA hard disk drive maximum capacity is 2TB Installation Steps Make sure to take precautions against static electric discharge when installing the hard disk Static discharge could damage the drive and the internal components of the NVR To reduce this risk it is best to work on an anti static mat and use a grounding wrist strap 1 Use a Philips head screwdriver to remove the NVR s outer metal housing by removing the two screws on each side of the housing and the one at the upper back edge Set the screws aside to be used for reassembly 2 The hard disk will have mounting holes on the underside of the drive and these should line up with the mounting holes in the bottom of the NVR Orient the drive so that the power and data cable connectors are facing the front of the NVR and align the mounting
44. t points cruising between points patrols sweeping the boundary calling an auxiliary switch light switch horizontal rotation are controlled with the usage of the arrow keys The Step is mainly used to control directions The figure can be set from 1 to 8 Directly click le or led to adjust zooming sharpness and brightness adjustment PTZ supports eight directions 5 5 2 Quick location Quick location lt SIT gt is in the middle of the direction arrows Make sure that the protocol supports this function PTZ will turn to the clicked point and move it to the centre of screen lt also supports zooming Drag the mouse in the quick location page The dragged box supports 4 to 16 times zooming Hold the mouse and drag it up to complete zoom of the box Drag it down to narrow the box Refer to 7 1 5 about more details 5 6 Search In real time monitoring screen right click and select search to enter the searching interface SelectAll List E 4 Channel sy PJAJIType Norrnal Alarm Motion i NVR User Manual 03 00 DO hi 2 iw Start Time Type 21033042 R 03 36 26 i 05 00 00 i 141 Start Time 2001 02 23 03 30 42 End Time 2001 02 23 03 35 53 Size KB 34362 Back S i x Su i 2 j d 5 E 7 a a mw 11 z 613 d 5 7 w ZO a Z 7 2 4 Search MS SAAT ype Normal Mi Alarm FAMotion 4 Click a specific date to call up the recording The list is upgraded automatically Select recording search start and end time
45. t with management authority could change others password 6 7 8 RS232 Function Select the appropriate the serial lie Console Baud Rate Set baud rate Baudrate 115200 Data Bits 3 Data Bit Default 8 Stop Bit Default 1 Stop Bits 1 Parity Default OK Cancel A Note Some models are without an RS 232 port please see Specifications 7 Web and Client 7 1 Web Operation 7 1 1 Network Connection Check NET Lamp on front panel light indicates connection de i Or check network connection by LCD on front panel refers connection error Set IP subnet mask and gateway for computer and NVR Please assign the same segment IP address without router need to set the appropriate subnet mask and gateway with router The detail of NVR network configuration please see Configuration gt Network Setting Ensure the IP is correct and check whether the NVR is on the network by using the Windows command ping NVR User Manual 7 1 2 The control installation and the user login logout Users can remote access to NVR by Internet Explorer assuming you have a correct network configuration The following interface will pop up when you access the IP address in Internet Explorer E VSS Web Windows Internet Explorer Lo Je G Joy SE hitp 1012117Y Ly Favorites 5 lO Suggested Sites v Be Web Slice Gallery v VSS Web gt El gt dm y Pagev Safety y Tools 0 To help pr
46. video encoding settings the capture channel access and network settings 6 2 1 Basic VIDEO rio em ee A Channel Select the desired channel Channel name Select the channel Channel 1 Channel Name Cam 01 name ci E vee Channel display Set the position of the Time Display Y Set l Time Synchronization channel title ii AA a Time display The position of the time title in the screen Time Synchronization Time synchronization of network channels and Copy Default OK Cancel App the device Video cover Set protected area of previewing and recording NVR User Manual 6 2 2 Encoding settings VIDEO Basic Encoding Snapshot Net Channel Channel Compression Minor Stream Resolution QCIF Frame Rate FPS 25 Bit Rate Control CBR Quality Audio Bit Rate Kb S Copy Default OK Cancel App Channel Select the desired channel Compression H 264 Resolution The resolution of main stream can be D1 orCIF Different channels correspond to different resolutions Framerate setting range is also different The channel extension stream resolution can support CIF QCIF FrameRate P system a s 25 frames sec N system a s 30 frames sec Note Resolution and frame rate are vary depending on NVR model Bit Rate Constant Bit rate or Variable Bitrates Bit rate can be set in Constant Bit rate There are 6 levels for image guality in Variable Bit rate 6 is the best but it i
47. y User Add Group Modify Group Modify Password Status Login Net Normal Default User Add users add group member information and set authorities Y lt Default users are admin user and hidden default the password of first two username is 123456 admin has advanced authorities user only has surveillance and playback authority Hidden default operate in password less login mode cannot delete NVR login in this name automatically if no user login user can revise limits of power then operate some without login Enter Add users input username password and select group and reusable options Reusable allows the account to be used by multiple logins A user can only belong to one group User rights cannot exceed group rights Modify users modify existing group member information and authority Add group add group and set group authorities NVR User Manual Set a group and authorize 60 items including control panel shut down live view playback record record backup PTZ control account system information alarm in out setting system configuration search log log delete upgrade operation authority etc Modify group modify existing group information Modify Password change password Select a username input the old password and new password twice Click Save to confirm Password can be in 1 6 numbers letters or symbol blank in beginning and end is invalid The accoun
Download Pdf Manuals
Related Search