View - Webcollage Content Publisher
Contents
1. 3 Wieght indication 4 Daily Calorie FEATURES 4x7 segment characters LCD display Weight capacity 182kg 400lb with 0 1kg 0 2lb graduation Unit change between LB KG ST EEPROM option default LB 4 user memories to store user records User input includes Gender Age Height Information output includes Weight and Daily Calorie Consumption Battery low detection function Clock and Temperature 0C 50C 32F 122F function KEY ASSIGNMENTS Unless otherwise specified below are the functions of the keys UP to increment the numeric value to toggle the user selection to recall user memory DOWN to decrement the numeric value to toggle the user selection to recall user memory SET to change the unit LB KG ST to go to User Setting Mode ITEMS INCLUDED IN THE PACKAGE Scale unit 1 pc remote display unit 1 pc wall mounting bracket 4 pcs plastic wall plugs 6 9 4 pcs M3x25 screws BACK VIEW Battery Compartment CR2032 Lithium Battery Compartment Scale Unit a Remote MO Display Unit 2 pcs AAA Alkaline Battery Compartment PREPARATION BEFORE USE 1 Insert the Battery Open the battery cover on the back of the scale unit Insert 3 pieces AAA alkaline batteries not included 1 Replace batteries Open the battery cover on the back of the wireless remote display ne2. unit Insert 2 pieces AAA alkaline batteries separately in two battery when compartment not included Remove the red strip from CR2032 displayed lithiumbattery compartment in first use or insert the battery after 2 Replace batteries replacement in the remote Be sure that the polarity of the batteries is set display oot when properly for proper function If you do not intend to use this unit is displayed fora prolonged period of time it is advisable to remove the 3 Do not remove the batteries before storage CR2032 lithium battery and 3 pcs Open the battery door Scale ae AAA batteries at Z as 3 pieces AAA 5 the same time O alkaline batteries otherwise clock and memory must be reset again Direction of the Direction of 4 pcs CR2032 battery AAA batteries IMPORTANT NOTICE TO USERS 1 Choose the location to mount the display on the wall The location should be free of temperature extremes and water It should be where the display can be easily viewed and operated Keep away from direct sunlight and where the operator easily reaches the display 2 Make sure the structure and mounting hardware is solid enough to support the display The mounting brackets should be securely fastened to the wall so that it cannot loose from the mounting surface 1 Fix the Wall Mounting Bracket a Drill two holes on the wall
3. 1 LB i result display 5 If the user steps off the scale the scale starts measuring the zero weight and asks the remote to display running zero animation Fig 9 00081 7 6 If the zero weight is different with previous zero value the base scale tells the remote to display Err0 Fig 10 and then go back to the clock mode Erri Fig 10 auto zero 7 If the user does not step off the scale the scale will go back to clock mode automatically User Setting Mode 1 During the remote is in Memory Recall Mode press UP DOWN keys to select user and press SET key to go into this User Setting Mode in order to edit the user record 2 User may set the height age and gender Fig11 1 Having entered all items the data is stored into the EEPROM Fig 11 User Setting Clock Mode 1 The clock and the temperature will be displayed toggle every 5 seconds as Fig 12 Fig 9 Clock and temperature 2 Press lt CLOCK gt to toggle the display of 12 24hour optional or Fahrenheit Celsius Fig 13 12 hours and Fahrenheit are default setting gt i gt GS Fig 13 12 24 with C F toggle 10 Clock Edit Mode In the clock mode press and hold lt CLOCK gt for 2 seconds to edit the clock the hour will be flashed press lt UP gt and lt DOWN gt to increment or decrement the hour press lt SET gt to confirm hour setting and then minutes will be flashed pre
4. use instructions carefully before using the scale INSTRUCTION MANUAL Note Read this Instruction Manual carefully and keep it handy for future reference NOTES ON SAFETY Please read this section carefully to familiarize yourself with features and operations before using the unit The warning signs and the sample icons shown here are listed in order for you to use this product safely and correctly as well as to prevent product damage risk and injury to you and others The icons and meanings are as follows ndicates the right conditions to use the PRECAUTION NOTICE product and to prevent damage risk and injury IMPORTANT NOTICE TO USERS ndicates important notices users should read before using the product ndicates matters in which the possibility of CARE AND MAINTENANCE damage may happen as a result of incorrect handling and improper maintenance PRECAUTION NOTICE This product is intended for adults and children ages 10 to 85 e Make sure use only the type of battery stated see section PREPARATION BEFORE USE Be sure there is a clear line of sight between the Infrared Transmitter on the Scale and the Infrared Receiver on the Remote Display Unit PRODUCT DESCRIPTION FRONT VIEW Infrared Transmitter Via 5 LCD Display T rg Infrared Receiver 1 Male Icon 2 Female Icon
5. or limitation of incidental or consequential damages so the above limitations may not apply to you This Warranty gives you specific legal rights and you may have other rights which vary from state to state To obtain warranty service you must return the product freight pre paid in either its original packaging or packaging affording an equal degree of protection to DETECTO a division of Lava Lite LLC at 1200 Thorndale Avenue Elk Grove Village IL 60007 lt DETECTO For additional information regarding this product or its warranty please contact us Distributed by Detecto A Division of Lava Lite LLC 1200 Thorndale Avenue Elk Grove Village IL 60007 1 800 336 5282 email service precisiononescales com 2013 DETECTO is a registered trademark of DETECTO Ltd in the U S A and other
6. with the distance in between two holes is 58mm Fig 1 Make sure the height of the holes is between 140cm and 180cm from floor Fig 2 87 o8mm 9 140 180cm Hole on the wall Wall plug lt 15 55cm Wall bracket b Insert two plastic wall plugs into the holes until they are flush with the wall Place the bracket against the wall and insert two M3x25 screws through the holes into the wall plug Use screwdriver to tighten the screws Fig 1 c Hang the remote display unit in the bracket on the wall 3 Set the Right Position Use the scale on a flat and hard floor surface And make sure the scale in front of the remote with the distance from 15cm to 55cm Fig 2 4 Start up the Scale Press lightly on the scale platform to start up the scale the display shows 0000 and will cyclic show on screen Then display returns to clock mode The scale is ready for use OPERATION 1 Having inserted the battery in remote device the remote state is still in clock mode After insert the battery for base scale tap on the base scale it asks the remote displays and then step off the scale it ask the remote to display running o to indicate that it is measuring the zero weight Fig 2 Fig 2 First auto zero lt 2 If the base scale detects battery low it will ask the remote to display Lo on LCD Fig If the battery low is in remote control it
7. BS DETECTO OVER ver WOO YEARS OF MEDICAL ACCURACY DIGITAL GLASS SCALE MODEL D401 Ye TEC To USER MANUAL Table of Contents INTRODUCTION T T aun S 3 NOTES ON SARE TY U Z u A eae dieser a ad tessa de 3 PRECAUTION NOTICE u u sthesebtesveustusineatsyocivs EREA ES 4 PRODUCT DESCRIPTION akak naa pas u akay aQ aaa 4 FRONT VIEW a n a aaa us uma asukuy 4 LCD DISPLEAY a SA a inu tau save taal obs E 5 FEATURES amp KEY ASSIGNMENT Saronni un a E osa es 5 ITEMS INCLUDED IN THE PACKAGE usus aswanqa asua 6 BACK VIEW in A Z t oa a Wa aka a ayna qA a 6 PREPARATION BEFORE USE u CAAS Sa Aart tec 7 OPERATION s kaa W aha 8 WEIGHING MODE 2 asan aha nqa a haqa q uay 8 MEMORY REGAL sin R SS pH aw asta taa 9 USER SETTING M DE i u ua u ma steels Su u Q a m un u aS 10 CLOCK dawah dk usaq Sau wA aaa ds 10 CLOCK EDIT 11 UNIT CHANGE MODE a a am n 11 MESSAGE DISPLAY Uu a Be kwa yau EEEE ES ei AART N 11 ADVISE FOR USE AND CARE cc craved mai EE uapa 11 Congratulations You have purchased a precision health monitoring product that should provide you with years of accurate use To assure you obtain the best performance please read the following set up and
8. en install it again to correct error If you cannot resolve the problem please contact Detecto Customer Service for consultation 8 Do not use for commercial purposes 11 LIMITED LIFETIME WARRANTY Your DETECTO product is warranted to the original consumer only for the lifetime of the product to be free from defects in materials and workmanship under normal use This product is designed for personal use on DETECTO a division of Lava Lite LLC reserves the right to nullify the Warranty Agreement should the product be used in a commercial environment This warranty is void if the product has been tampered with misused is limited solely the charge of repairing abused or modified Our obligation under this Warranty he product including the cost of parts or at our option replacing the product with an equivalent model There are no express or implied warranties except as listed above DETECTO A DIVISION OF LAVA LITE LLC IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR FAILURE OR MALFUNCTION OF THE PRODUCT AND ANY RECOVERY MAY NOT BE GREATER THAN EXCEPT TO THE EXTENT PROHIBITED BY MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO A PERIOD O on how long an THE PURCHASE PRICE PAID FOR THIS PRODUCT APPLICABLE LAW ANY IMPLIED WARRANTY OF F ONE 1 YEAR FROM THE PURCHASE DATE Some states do not allow limitations implied warranty lasts or t he exclusion
9. self it will show bAtt Fig Fig 3a Fig 3b 3 If the user steps onto the scale the scale turns on and goes to Weighing Mode directly unless it is the first time after the battery insertion or no valid zero weight is stored before The scale measures the zero weight and then sleep Weighing Mode 1 During the base scale is OFF when the user step onto the base scale it wakes up the remote display to have animation as in Fig 4 Fig 4 Weight trigger 2 The base scale measures the weight After a stable weight is obtained it asks the remote to display the weight value Fig 5 OIL Li 3 The scale starts measuring the zero weight if the user steps off the scale Then the scale turns off Fig 5 Weight obtained and locked Memory Recall Mode 1 During the remote is in Clock mode press UP or DOWN key to go into this Memory Recall Mode the user number will be flashed Fig 6 Fig 6 User select 2 User press UP or DOWN to select the user memory and confirm the selection for idle 2 seconds operation Then the user information will be shown Fig 7 Fig 7 User recall 3 User steps on the base scale and trigger the weight such as 4 2 4 After the weight is stable and locked the base scale transmits the value to the remote the remote displays among the weight and the calorie for 2 times with each reading shown for about 3 seconds Fig 8 Fig weight
10. ss lt UP gt and lt DOWN gt to increment decrement the minute press lt SET gt to confirm whole clock setting and go back to the Clock mode Unit Change Mode In the clock mode press and hold lt SET gt for 2 second to edit the unit press lt UP gt and lt DOWN gt to toggle the unit between LB KG ST EERPOM setting for no unit 2 units 3 units Press lt SET gt again to confirm this setting and go back to clock mode Message Display represents the weight is negative ErrO represents that the zero weight is not accurate Err1 represents instable weight measured Err2 represents overloaded Err3 represents that measurement error Pwn gt Advice for use and care 1 The glass platform will be slippery when it is wet Keep dry 2 Keep standing still during the course of weighing 3 Treat the scale with care as it is a precise instrument 4 Clean the scale with a damp cloth and avoid water getting inside the scale DO NOT use chemical abrasive cleaning agents 5 Keep the scale in cool place with dry air 6 If scale fails to turn on check whether battery is installed properly or battery power is low Insert or replace new battery Do not mix old and new batteries or different types of batteries alkaline carbon zinc rechargeable 7 If there is error on display or the scale will not turn off for a long period of time please take out the battery for about 3 seconds th
Download Pdf Manuals
Related Search