“Flashlight of the Evil” Product User Manual
Contents
1. Flashlight of the Evil User Manual Instructions for Game Auto Update Perform the automatic game software update with a USB flash drive Steps and key notes 1 Prior to doing the update make sure the file on the flash drive is named update xli and is stored on the root location 2 When the game is running plug the flash drive to the host computer USB port you will need to unplug one of the current connection If the game automatically stopped and rebooted the computer it means the update was successful at that moment unplug the flash drive update is done If the update failed repeat the steps above 597 a2. Flashlight of the Evil User Manual Flashlight of the Evil Product User Manual Product Name Flashlight of the Evil Developed by Guangzhou Sealy Electronic Technology Co Ltd About this user manual This user manual is intended to get users familiar with our Flashlight of the Evil product It contains details about the proper use and precautions It also provides solutions to problems you may encounter while using our game Users can find more information about this product through other means by contacting our Company Your valuable opinions and advice are greatly appreciated Description about the identification used in this manual and on the product The logos are included both on this manual and on the product to facilitate the user s operation of our product LOGO of the Flashlight of the Evil Flashlight of the Evil User Manual Table of Contents 1 Technical Specifications 3 2 Product Characteristics 4 3 Game Introduction 5 4 Hardware User Guide Game Computer Set Portion 8 5 Unit Installation 14 6 User Settings Guide 18 7 FAQ and
3. Gun Test not connected Back Figure6 2 Peripheral input output test page Flashlight of the Evil User Manual When the gun and control panel are properly connected the display will show connected otherwise showing not linked The test cannot be done if hardware is not connected The test of the control board includes testing the lights fans vibration seat and keys figure 6 3 Control Panel Test On Fan Vibration Treadle IP Treadle 2P Figure 6 3 Control Board Testing page Lights during the test the ON OFF indication will change ON meaning the device is on and OFF meaning the device is off Fan during the test the ON OFF indication will change ON meaning the device is on and OFF meaning the device is off Vibration during the test the ON OFF indication will change ON meaning the device is on and OFF meaning the device is off Treadle 1P during the test the RELEASED PRESSED indication will change RELEASED meaning the device is not pushed PRESSED meaning it is pushed Treadle 2P during the test the RELEASED PRESSED indication will change RELEASED meaning the device is not pushed PRESSED meaning it is pushed The test of the gun includes testing and calibration of the gun interface as below figure 6 4 20 Flashlight of the Evil User Manual Gun Test Calibrate Pl not connected Calibrate P2 not connected lest Vibration Reset Calibration Explanation Back Figure 6
4. 12V 26 10 Flashlight of the Evil User Manual A3963WV2 4P 4 2 d CN4 Power Connection GND 4 GND 3 12V 2 12V 1 4 2 e CN5 Reserved for future use no connection 4 3 Vibration device driver board GND UCC MT MT U a sealyi20611 WIFC_ DCM DRU se 1 R2 R25 R8 e _ FeRIS R23e Fe mo LA RA sT eris se je eel je e Jedi Sls s led n24 eL T sf _t e re __ ed FIRI EA LA e RED YE e 12 RIOe Fre ed e ge PEE o 5 1 S1 92 Photo of actual connection of driver board sd Flashlight of the Evil User Manual 4 3 a P1 Main control board vibration signal Main output power control 2 3 pins not used 4 3 b P2 Driver board Input power single 12V power source vibration device driver output 1 GND 2 12V 3 motor negative output 4 Motor positive output 4 4 Blower driver board O 00mm Power 4 Power VRI Motor 40 Umm Motor sealyl 20428 F KDBL GCDRU UI 0 Photo of actual blower driver board a Flashlight of the Evil User Manual 4 4 4 CN1 Motol connection A3963WV2 4P 1 Power input 2 Power input 4 Motor 4 4 b CN2 Input control connection A2501WV2 2P 1 Blower input control signal 2 12V 4 5 H61Computer host connections X Power Ethernet Display used connection and USB port ports RS232 serial port the one above Sound input and output p
5. 10 Change password 00000 Enter new password 000000 Re enter new password 000000 Back Figure 6 10 Game software update instructions Firstly contact client support to obtain the update patch and store it on the root location of a USB flash drive While the unit is powered off insert the flash drive into the USB port then boot on the unit Wait for the unit to boot up and reboot automatically meaning the software has been successfully updated Unplug the USB flash drive when update is done L5 Flashlight of the Evil User Manual 7 FAQ and Troubleshooting This section describes the commonly observed errors and their solutions No response from 1 Power not adequate 1 Check power is adequate for unit use computer and screen 2 Fuse burnt 2 Replace fuse after powering on 3 If display EAA 5 no input 3 Verify 220VAC power is functional switch signal for more than 1 minute check is on and make sure signal cable is well HDMI connection for anomaly connected Power on sound No power to the monitor 1 Check power connection to the monitor functional but no Video signal cable not connected 2 Check the video signal cable connection image and no Monitor driver board broken between monitor and computer message Ac Hii fi 3 Replace monitor driver board displayed No 3D effect Monitor driver error 2 Adjust with remote controller or contact client support to get a new monitor driver program as replace
6. 4 Gun Testing page Calibrate P1 during the test the Connected not connected indication will change Connected meaning the device is properly connected and not connected meaning the connection failed Calibrate P2 during the test the Connected not connected indication will change Connected meaning the device is properly connected and not connected meaning the connection failed Test when selected the screen would display the operation details of the two guns Vibration during the test the ON OFF indication will change ON meaning the vibration is on and OFF meaning the vibration is off Reset during the test the Reset Success Reset Failed indication will appear Reset Success meaning the gun calibration is set to default values Reset Failed means the resetting failed and the current calibration values are still being applied Calibration Explanation will show the instructions for calibration EE Flashlight of the Evil User Manual Common errors Common errors Causes Solutions No reaction when key is 1 Keyis damaged 1 Replace key pressed 2 Cable not well connected 2 Reconnect cable Guns for P1 P2 are inverted 1 Wrong wiring 1 Reconnect cables Crosshair is not accurate 1 Hardware not calibrated 1 Recalibrate 2 Sensor mounting or wiring 2 Inspect mounting and wiring of error the sensor 3 Damaged hardware 3 Replace hardware 6 3 B Access the Audit page to check the operating revenue details A
7. Troubleshooting 26 8 Instructions for Game Auto Update 27 Flashlight of the Evil User Manual 1 Technical Specifications Operating Voltage 220VAC Rated Power 500W Single Unit Dimensions 2980mm L X 2040mm W X 2703mm H Weight 550 KG Precautions Do not hit with hard items or scratch the screen While the unit is still powered on do not touch the fan system to prevent injury by the fans The product needs care and maintenance malfunctions should be handled by professionals Make sure the screen surface is being cleaned regularly Do use the guns to hit other surfaces and do not pull the wires Flashlight of the Evil User Manual 2 Product Characteristics Figure 2 0 Figure 2 1 PE 00020 Single or Double players Scary but humorous at the same time with high definition 3D graphics Adventure mode oversized boss designed to bring an oppressive feeling Original sound and music effect Huge screen display supporting 2 players 4 main stages 2 big boss choice is yours Difficulty level can be adjusted to satisfy different players Simple gun and foot pedal control easy to adapt various weapons and accessories many gameplays Perfect combination of horror and monster fighting thrills Flashlight of the Evil User Manual 3 Game Introduction This section
8. describes the gameplay and information related to the game Please read carefully if this is the first using this product Weapon description The player s weapon includes a gun and a foot pedal The gun has a trigger as the shooting control when holding the gun maintain about 1 3 meters away from the screen Sample picture of the gun below Figure 3 1 Sample of the gun Besides when hinted by the game for change of weapon or QTE and other operations you will need to achieve by pressing the foot pedal A sample of the foot pedal is illustrated in the picture 3 2 below The foot pedal is located on each side left and right of the seat Figure 3 2 Sample of the foot pedal Flashlight of the Evil User Manual The game display setting between 3D and regular non 3D can be switched with the 2D 3D key in the middle of the machine The switch looks like the picture 3 3 below Figure 3 3 2DAD Switch Gameplay description The player inserts the coin into the coin acceptor the game will start when the player uses the gun The player can select between stage clearing mode and free mode When the stage clearing mode is selected only two stages are available while the other two would automatically become available once the first two stages are cleared When the free mode is selected the player would continuously attack enemies without time limit After the game starts the player lifts up the gun and points at the screen whe
9. the Evil User Manual 6 User Settings Guide This section talks about how to set the Flashlight of the Evil game parameters Please read the following section carefully if you are using the product for the first time It describes each settings option in detail and helps the user familiarize with the unit and understand the effects of each one of them 6 1 Accessing the back end Only the management personnel can access the back end compartment which is through the door that houses the coin acceptor figure 1 1 below it is locked and can be opened with the key provided Figure 1 1 After you opened the door press the right most red button to access the back end settings menu The two left most are not used each key s function is described on the picture 1 2 below Key to access back end settings 6 2 Getting into the Settings Menu When the game is loaded press the back end settings key to access the Settings menu The back end settings interface contains 5 options Testing Audit Settings Password and Exit as illustrated by the following picture 18 Flashlight of the Evil User Manual JE dee EE 009 30709 000 001000 Background Setup lest Audit Setup Password Exit Figure 6 1 Backend Settings Menu 6 3 Background Setup Interface Description 6 3 A The Test option includes the test of the gun and the control panel illustration below lest Control panel test not connected
10. the Evil Appearance Logo light box Light strips Suspended Light Decorative metal chain Figure 4 1 Flashlight of the Evil Frame Flashlight of the Evil User Manual 4 2 Expansion Board Function port Function port Function port CN2 0 6 0 6 09 6 9 6 9 2c 1 H 09 0 09 9 0 9 0 9 9 9 25 40 eo e 6 6 O 6 40 2060060000909 N 25 Q8 1239 DS L29 L30 ED FEM DE 32 Salis smt 8 og PEE Lg w g uo 123 Q1 Ge ns RE C28 C29 C30 R28 SH em m II L C48 C Page srEdHT S Lom je elses al e a Bas EI HEIHE Aa jeg gE E PA e wisis C 4 T T T F 28 R32 R2 47 C50 C33 C35 R C HET LES LES HE ZHES Port to main i H e 9 0 9 0 9 0 9 09 9 eee 9 8 6 653 43 ALL ui u ii ts iL Uni TO o 5 l hu has 2 1 gus iem HEREA gs3 8n 2 d12 2 c a Bess wz Sem Dn nnd nen nn 4 M R OR v a 8 a ENIN a pag IR N 9H D U21 Gi DEZA v S c65 a gau e TLL wN N rU guu MMN A Ja ol os si 8 58 2 ob Bde 229 459 89 ao aot ETE e SED S68 Ses Sea Sea Gas ZED EA 3m 5 5m sm 32 2 3B E SE 58 SE of F r retr pr Cmn amo sonst sot DET ma n m am B ma EI enr we Lm LLmo oe mE LE ALE LE LER TR LEL ATR ET A8 52 sm 3E SE SE SE 3E g gm raet B l De r7 rm Em aR m Fa n Aa HEEL TI De Lm
11. Tea OEO i gs a Ss es e as aa Ge BU 612 022 za I z3 StI 9 2I ZS2 469 963 93 u Ea u 8a ui amp 8 ua ma e m _ m Lo c u w c _ C67 e e T a BE 920 MM en 9NH m m E E dE mr aa a Au m aa D O IM etu gg S m m dE maoru 9 u 099 1998 ag 8 Dx XT1 amp 802 Eso E p Ittitttp See TA gt ms rw till 059 263 Iu I Sp r5 pee Amm zz S Bees smga v MET J Ju Ms m dadidiart titei C40 C42 C C46 C19 we e i 4f A 9 Tit eevee eeeeee Sf nena bebisatias ee Fe atta t a m Y J d tyeeasrar 31 Photo of the actual expansion board Flashlight of the Evil User Manual 4 2 8 CN1 LED Output Control Connection Pin header connector 50P 2 54 Pin 27 12V 28 Right pedal light R 4 12V 29 Right pedal light G 30 Right pedal light B 13 Vibration device 1 connect to 14 Vibration device 2 connect to 39 12V 40 Reserved output vibration driver board vibration driver board 4 2 6 CN2 Input Output Function Connection Pin header connector 40P 2 54 Pin 3 set motor control signal 1 12 plus shielded ground 4 2 c CN3 Input Output Function Connection pin header connector26P 2 54 pin EN SN 25
12. l User Manual Accessing the Clear permanent page illustrated by figure 6 8 below Clear permanent record Total coins income 0 Game times 0 Password 000000 Confirm Figure 6 8 Enter the password press confirm to clear the permanent records If the user forgot the password he she can contact our client support to obtain a new password 6 3 C Accessing the Setup page as illustrated by figure 6 9 below Setup Coins per stage 0 Difficulty Easy Volume l Vibrate rate 10 Language English Default setup Reset to default Back Figure 6 9 Setup page 24 Flashlight of the Evil User Manual Enter the following factory password 000000 to load the Setup page Coins per stage sets the number of coins required to start the game also for continuing the game Range O to 9 Difficulty sets the difficulty level of the game broken down in 3 easy normal hard Sound volume sets the sound volume range O to 10 the higher the value the louder Vibrate rate sets the vibration frequency of the seat range O to 120 default is 50 Language sets the language of the game includes Chinese and English Default setup jumps to the factory setup page the distributor number can be set if it was not done yet Reset to default clears the total records devolve records gun calibration values will be set to default 6 3 D Accessing the Password option allows user to change the password illustration below figure 6
13. ment There is image but no Volume is set to minimum 1 Adjust the volume to optimal level sound Broken speakers 2 Replace broken speakers 1 2 3 Audio cable not connected 3 Check audio cable is connected between 4 Power supply to amplifier not computer and amplifier connected 4 Check power cable to amplifier 5 Broken amplifier 5 Replace broken amplifier No response after Coin did not get accepted Re insert a new coin inserting coin Free game set Change the setting Not recognized coin inserted Replace the reference coin in the coin Broken coin acceptor acceptor Loose coin acceptor wire Replace coin acceptor No 12V DC current into the coin Reconnect acceptor Reconnect Unable to access Computer and IO board not 1 Check the IO board port is connected to background settings connected host computer with Settings key 2 Wrong wiring to the IO board 2 Check the connection to the IO board is 3 Wrong wiring to the settings key correct Lights fans or 1 Wrong wiring to IO board 1 Check connection to IO board is correct vibration seat do not 2 Broken hardware 2 Check if hardware is damaged respond 2 3D switch 1p pedal 1 No serial connection between IO 1 Check IO board is properly connected to or 2p pedal do not board and host computer host computer respond 2 Wrong IO board wiring 2 Make sure IO board wiring are correct 3 Broken or dysfunctional hardware 3 Check for broken hardware Table 7 1 26
14. orts connects to control board 213 Flashlight of the Evil User Manual 5 Unit Installation Game machine structure and parts illustrated in picture below Figure 5 1 Machine broken down structure picture The assemble process is composed of 7 steps please follow the instructions below 1 First step When mounting this portion make sure the holes are aligned then screw to tighten Figure 5 2 2 Step2 z dde Flashlight of the Evil User Manual These two parts are identical gt e un oO en oO 5 un z z aligned before screwing Figure 5 3 3 Step 3 Make sure the chains are tightened E ON C3 B N E D e c3 2 D Se N oF 5 4 Step 4 245 Flashlight of the Evil User Manual Connect the two parts then screw P di Align the holes Figure 5 5 5 Step5 Connect the top and side panels aligning the holes and screw before installing the curtain Connect these two parts aligning them and screw to tighten them Figure 5 6 6 Step 6 Paten After the two major parts are connected install the 16 middle board and foot board Flashlight of the Evil User Manual Align the holes before screwing Figure 5 7 7 Step 7 ae After the frame is assembled align the back to mount the decorations Figure 5 3 EL Flashlight of
15. re a crosshair would appear Pulling the trigger would attack the enemy if the player holds the trigger it would activate the lightning blade feature which can be used to slash the enemies Hitting the foot pedal will change the property of the gun Hitting the pedal and pulling the trigger at the same time can skip the CG narrative scene Players can earn extra points by hitting the circled weak points and lit up accessories When the game is over the score is calculated and displayed on the score board Game modes Stage mode and Free mode Flashlight of the Evil User Manual Stage mode different stages will have different game stories Free mode eliminate as many enemies as possible in unlimited time Additional game details Regular gun high speed and short cool down inflicting continuous damage to enemies Fire gun high power but long cool down inflicting high damage to enemies Freeze gun more powerful that regular gun and shot cool down attacking enemies multiple times Lightning blade turning into a lightning rod hold the trigger and wave at the enemies to slash them Pedal feature whenever it is pressed the gun property changes can also be used to dodge the enemies attack Pointing away to recharge reload when you point the gun away from the screen the gun power gets recharged instantly Flashlight of the Evil User Manual 4 Hardware User Guide Game Computer Set Portion 4 1 Flashlight of
16. udit Total coms income 0 Game times 0 Run time 00 07 33 Devolve record Game time 00 07 33 Permanent record Coins addition times 0 Clear permanent Average score 0 Back Game cleared times 0 Game cleared record 0 Figure 6 5 Audit page All the game records saved including total coins income game times run time game time coins addition times average score game cleared times game cleared record Accessing the Devolve shift record page illustration below figure 6 6 En eae Flashlight of the Evil User Manual Audit Currentrecord Total coms mcome Total record Game times Run time Devolverecord Game time Permanent record Prior record Clear permanent Total coins income 0 Game times 0 Run time 00 Back Game time 00 Figure 6 6 Devolve record page Records of the previous and current business operation shifts convenient for shift change analysis Holding the confirm button for 3 seconds will transfer the current record data to the prior record clearing the current record at the same time Accessing the Permanent page illustrated by figure 6 7 below nun Total coins income Total record Game times Devolverecord Permanent record Clear permanent Back Figure 6 7 The permanent records can only be deleted by using the Clear Permanent function all other records can be cleared by restoring to the default factory settings Nom Flashlight of the Evi
Download Pdf Manuals
Related Search