Fully Automatic Pet Door
Contents
1. the signal from your pet s collar Once your pet has moved completely through the opening the panel closes 12 www hightechpet com High Tech Pet Products Inc ADJUSTABLE HOLD UP TIME The door is held open for a short time to let the pet get fully through the door before it starts closing Depend ing on the speed your pet moves you may adjust the hold up time as follows 1 Press OFF button oo POWER HIGH ar F TEP et 2 Press and hold one or both sensor 5 buttons to select hold up time POWER PFT on Fully Autom ated Pet Door 3 Press OFF button BATTERY to save this hold up x ww B ro SENSORS time ee RANGE 4 Press ON button to N fy A power the door XN s s ii OUTSIDE G INSIDE as Inside Outside Time e 2 sec When shipped from the factory the hold up time is set to 4 seconds We recommend you initially introduce your pet to the door with a long hold up time Later you can reduce the hold up time if desired HOLD OPEN FEATURE A new feature introduced in 2012 allows the door to be manually opened and stay open for any length of time If you wish to leave the door open for an extended time period use the Hold Open Mode as follows The door panel will remain open as long as power is available A Hold ON button B Press OPEN button To return to normal operation press just the OPEN button High Tech Pet Products Inc www hightechpet com 13 The op2. fac ing the door opening The unit is not likely to trigger if your pet is just wandering by Typically the ultrasonic signal is bounced off the ground in the direc tion which your pet is facing This means that surfaces which are highly reflective such as tile and linoleum will result in a longer working range than acoustically absorbent surfaces such as carpeting Consult the ADJUSTING RANGE CONTROLS section for instructions on setting the desired opening range High Tech Pet Products Inc www hightechpet com 5 INSTALLATION POWER PET POWE MOUNTING YOUR POWER PET DOOR Your POWER PET door mounts flush to any door or wall The hardest OPTIONAL part of installing the POWER PET WALL ADAPTER door is cutting the hole If the unit is to be mounted in a door up to 1 34 thick there is no framing necessary The pre made Outer Frame that came with your POWER PET door will provide a finished look to the open ing If you are installing your POWER PET door in a wall it is advisable to build a frame around the opening or order our convenient WALL ADAPT ER TUNNEL The hole dimensions INSTALLATION OVERVIEW given are for the finished opening not including the frame Dimensions of the frame you build should be added to the opening size to determine the final size of the hole you cut in your wall WALL INSTALLATION DOOR INSTALLATION OUTSIDE FRAME OUTSIDE FRAME OPTIONAL WALL ADAPTER TUNNEL AC POWER ADAPTER PLU
3. FF button to turn off the door controls and all the lights Leave the door powered by the wall wart or battery when you do this Then while holding down the MANUAL OPEN button press and release the INSIDE SENSOR button The INSIDE light will blink to indicate the feature has been enabled When shipped from the factory the auto matic safety retract feature is enabled After Defeating or Enabling the feature press the POWER ON button to resume normal door operation 14 www hightechpet com High Tech Pet Products Inc PET COLLAR OPERATING INSTRUCTIONS Your POWER PET DOOR comes with a standard model MS 4 or MS 5 ultrasonic transmitter collar Each collar includes a battery TEST button which illuminates a red LED when the battery is OK If the LED fails to light battery replacement is necessary Note To energize the MS 4 Collar pull out and discard the PULL TAB which is protruding from the side of the collar To energize the MS 5 Collar open the case as shown in the Battery Replacement section below and pull out the PULL TAB Discard the PULL TAB and close up the case ADJUSTING THE STRAP 1 2 Fasten the collar around your pet s neck so that it fits comfortably In most cases there will be excess strap length With a soft pencil or magic marker mark the amount of strap to be removed leaving at least one inch past the D ring buckle Remove the collar from your pet and cut off the excess strap at the mark To avoi
4. GS IN HERE 6 www hightechpet com High Tech Pet Products Inc POSITIONING THE OPENING ON THE DOOR OR WALL Reference Line Measure height of animal s Opening is 1 lower than chest height of animal s chest CUT OUT DIMENSIONS Model PX 1 Model PX 2 gt i Frame thickness YE 11 25 Reference Line Reference Line Final cut out size should include the thickness of any additional wall framing not required for door mount or when using optional wall mount kit High Tech Pet Products Inc www hightechpet com INSTALLING YOUR POWER PET DOOR This is the easy part Install the POWER PET and Outside Frame as shown below 1 Cut Hole wall installation 2 Install Power Pet will require framing door See installation notes OUTSIDE INSIDE 3 Install Outer Frame Framing Tunnel Inner Frame now comes pre You may purchase our attached to Power Pet door optional WALL ADAPTER TUNNEL Or build your own IMPORTANT INSTALLATION NOTES a When installing the inside mounting screws make sure they are only moderately tight Over tightening will cause your Power Pet door housing to conform to any irregularities in the flat ness of your door or wall and will cause the door panel to slow stick or malfunction Just tighten the screws until they stop That 8 www hightechpet com High Tech Pet Products Inc is enough to insure that the installation is secure Sh
5. NTROL COMPATIBLE products Order one pad for every piece of furniture or other area where Fido doesn t belong Order additional collars for additional pets www hightechpet com 21 TROUBLESHOOTING GUIDE For each problem start with 1st solution then 2nd etc until solved PROBLEM SOLUTIONS While opening door stops rising and all lights turn off or blink Door panel goes up and down without stopping Very short range on both sensors Outside sensor good but inside sensor yields short or no range Inside sensor good but ouside sensor yields short or no range Manual button works but in side and outside sensors yield short or no range Manual button works but door is not triggered by collar Door goes up too slowly Door sticks at top Door sometimes opens by itself Door does not open with manual button or collar Multiple collar failures Range is difficult to adjust to less than five or six feet 22 www hightechpet com 1 Replace power supply 2 Replace motor 1 Replace main wire harness 2 Replace main circuit board 1 Replace sensor cable 2 Replace main circuit board 1 Loosen mounting screws Slightly 2 Clean sliding door with soap and water then spray with dry lubricant 3 Replace motor assembly 4 Replace main circuit board 1 Reduce range settings on front panel 1 Replace main circuit board 1 Upgrade to MS 4 or MS 5 collar 1 Replace main circuit board H
6. TECA 7 NMO The Most oducts on the Planet Pe Poner Pet Fully Automatic Pet Door POWER PET Ne tn aee m A i amp IE aa INSTALLATION amp OPERATING INSTRUCTIONS INTRODUCTION Product Description Your new POWER PET Electronic Pet Door is like no other pet door made Patented POWER PET electronic pet doors are fully automatic mo tor driven and open completely under their own power Activated by an ultrasonic pet collar your new POWER PET door will keep out stray animals It is secure against wind rain cold and snow and provides much better insulation than a conventional flap door Your new POWER PET door features an attractive high strength door panel that quickly and quietly powers upward disappearing into the stylish housing Your pets are empowered to come and go as they please while their animal friends are politely asked to stay out Pre BATTERY _ gt lt CONTROL PANEL COMPARTMENT y BATTERY OPTIONAL lt 4 HIGH STRENGTH ABS COMPOSITE HOUSING MOUNTING SCREW COVERS 8 DOOR PANEL Power Input P Jack Jack ower Input ULTRASONIC SENSOR High Tech Pet Products Inc www hightechpet com 3 POWER PET doors increase home security with a special automatic dead bolt locking feature that guards against would be intruders Only the coded signal from your pet s collar will open the Power Pet door Only Power Pet doors featur
7. cat Pad You may add any of these collars to your POWER PET Door order to configure your own custom electronic pet care system High Tech Pet Products Inc www hightechpet com 19 Wall Adapter Tunnel Install your POWER PET door on any wall in one easy step with our conve nient WALL ADAPTER TUNNEL accessory which extends the passageway and provides a sealed pro fessional installation It fits snugly into the POWER PET door main frame on one side of the wall and the POWER PET outside frame on the other side Adapts to any wall thickness from 4 to 8 thick Rechargeable Backup Battery Install this heavy duty long life sealed 12 volt rechargeable battery in your POWER PET door to provide back up power in case of an AC power failure Provides hundreds of door openings to let your pet in or out until power returns Automatically recharges in your door when power is restored Battery Charger Kit For battery powering of the POWER PET Door in installations where AC power is not available This kit includes a battery charger rechargeable battery and an AC adapter Simply charge the battery for 12 hours and insert it in the door to provide one to four weeks of normal opera tion For the ultimate in convenience we recom mend that you purchase this kit and one extra rechargeable battery above Use one battery in your POWER PET door and keep the other in the charger When your door battery runs down just swap in l
8. cts offers complete refurbishment of the door at our facility in Ventura CA Contact Customer Service for instructions on shipping your door back to us For customers with the mechanical skills to refurbish them selves we offer many replacement parts on our web site www hightechpet com along with do it yourself instructions 18 www hightechpet com High Tech Pet Products Inc MANY CONVENIENT ACCESSORIES We ve added all sorts of great new options to make your POWER PET PX the most versatile pet door you ll find EXTRA PET COLLARS Model MS 4 or MS 5 Ultrasonic Transmitter Collar You may wish to purchase an Extra col lar for each additional pet and keep one or two more as spares Lightweight and comfortable on all cats and dogs These collars will operate all our ULTRASONIC devices including e POWER PET Fully Automatic Pet Doors e SOUND BARRIER Non Shock Indoor Sonic Fence e YARD BARRIER Non Shock Outdoor Sonic Fence Model RX 10 Optional Multi Function Collar Our ingenious Model RX 10 Multi function Collar combines the ultrasonic transmitter function of the Ultrasonic model pet collar above with our radio receiver and shock stimulus technology to operate ALL our products including TOTAL PET CONTROL COMPATIBLE e POWER PET Fully Automatic Pet Doors e SOUND BARRIER Non Shock Indoor Sonic Fence e YARD BARRIER Non Shock Outdoor Sonic Fence e HUMANE CONTAIN Electronic Pet Fence e RADIO MAT Electronic S
9. d fraying carefully heat the cut end with an open flame to melt and fuse the material Re fasten the collar around your pet s neck so that it hangs loosely and comfortably Your High Tech Pet MS 4 or MS 5 transmitter collar will operate for 3 to 5 months on a single easily replaceable battery Replacement batteries part number B3V 1A are available from www hightechpet com High Tech Pet Products Inc www hightechpet com 15 REPLACING THE MS 4 BATTERY 1 Insert screwdriver or knife in end slot and pry open 2 Separate top from bottom 3 Replace battery top with the metal ring visible 4 Carefully mate top and bottom while keeping aluminum speaker centered in the top hole Squeeze together the top and bottom until both ends snap 16 www hightechpet com High Tech Pet Products Inc REPLACING THE MS 5 BATTERY 1 Unscrew the bottom cover 2 Pry bottom from top on ends and on edges using small flat blade screwdriver 3 Remove bottom note battery orientation 4 Remove and replace B3V1A battery 5 With new battery installed close case Squeeze until bottom flush with top by squeezing top and bottom together 6 Insert and tighten screw High Tech Pet Products Inc www hightechpet com 17 REPLACING THE MS 5 BATTERY WATER RESISTANCE The High Tech MS 4 ultrasonic transmitter collar is water resistant meaning that rainy weather and humidity will not damage the unit These collars are NOT
10. designed to be fully immersed in water Should this occur simply open the unit shake out water and let dry In most cases the unit will function normally However the life of the battery will likely be reduced or the bat tery may require replacement The MS 5 collar is fully waterproof to a 3 foot depth TRAINING YOUR PET Training your pet to use its new POWER PET door should be a relatively effortless task Some pets may become startled by the sound and move ment of the panel but be patient Nearly every pet will soon be used to the POWER PET S operation and learn to love using its own personal entry We recommend that you lead your pet to the door and allow it to open sev eral times to teach the animal the cause and effect relationship between pet and door Then place a food reward on the opposite side and lead the animal through the opening allowing it to get the reward on the other side Repeat several times Before too long your pet will get the idea If your pet doesn t get it in one sitting remain patient and let your pet just walk around on its own for awhile It won t take too much more time for your pet to realize the POWER PET opens whenever the pet comes its way One of the most frequent comments we hear from POWER PET owners is how much their pets love using their POWER PET door We are sure your pet will feel the same REPLACEMENT PARTS Over the years you may need to replace damaged or worn out parts High Tech Pet Produ
11. e an ingenious directional sensing system that operates a fully automatic motor driven panel The signal emitted from your pet s collar tells the Power Pet door how far away your pet is and the direction in which your pet is traveling This allows the Power Pet to work like magic opening only when your pet is on a direct ap proach not when it is just wandering by and not when it is sitting or sleeping next to the door ALL NEW DESIGN After selling thousands of our original POWER PET PP models we are very pleased to introduce our All New com pletely redesigned and restyled PX Model We listened to the feedback of hundreds of customers and threw in a few ingenious new Ideas of our own to bring you the ultimate combination of security style and convenient features The PX model which features an extremely slim design Is less than 2 inches deep This allows it to be mounted flush to your door or wall You cut a hole only as large as the door panel itself then mount your POWER PET door in front of the opening You will find it is actually easier to install a POWER PET door than a conventional pet door and certainly easier than installing a between the studs type door The PX is constructed of an ultra high strength ABS com posite housing with a bullet proof Lexan plastic door panel giving you and your pet the ultimate in security The Lexan panel is mounted on a Sliding air tight seal for the best wind rain and foul weathe
12. echarge your battery 3 Full Battery Operation You may also operate your POWER PET Door with the battery only This eliminates the need for the AC adapter or any electrical power connection However you will need to recharge the battery periodically Recharge interval varies depending upon use In this case we recommend that you purchase the optional battery and a battery charger kit With the charger kit you get a bat tery charger and an extra battery Use one battery in your POWER PET Door and keep the other in the charger When your door battery runs low just swap DUAL RANGE CONTROLS Individual range control to allow you to adjust different activation distances for inside and outside of your home Usu ally it s a good idea to use a short distance of a foot or two inside and a longer 4 to 5 foot distance outside Your new POWER PET PX gives you full control Note range markings on the door are not in units of distance but rather in signal strength A marking of 10 produces the maximum distance High Tech Pet Products Inc www hightechpet com 11 Adjusting the Range When you first install the POWER PET PX door pre set both RANGE Controls one at a time to the desired activation distance as fol lows Enable just the INSIDE or OUTSIDE sensor and set that RANGE control to zero Hold the collar at about your pet s height pointing down toward the bottom of the door and at the desired activation distance fr
13. ening motor is energized the entire time the door is open So if using only a battery to power the door and you do not have an AC Power Adaptor plugged into the door use this feature sparingly to keep from discharging the battery in just a few hours AUTOMATIC SAFETY RETRACT Your POWER PET PX is intrinsically safe for all pets and people including small children The door panel weighs less than 2 Ibs and is closed smoothly by gravity not the motor and is too light to cause any physical injury However just to be doubly safe around infants we ve included an automatic safety retract feature This feature causes the panel to instantly retract if it encounters an obstruc tion during closure DEFEATING THE AUTOMATIC SAFETY RETRACT Under unusual conditions such as a warped wall mounting the door sometimes may Close so slowly that the auto retract feature triggers the door to re open unnecessarily In these cases it may be desirable to defeat the Automatic Safety Retract feature Do this by first pressing the OFF button to turn off the door controls and all the lights Leave the door powered by the wall wart or battery when you do this Then while holding down the MANUAL OPEN button press and release the OUTSIDE SENSOR button The OUTSIDE light will blink to indicate the feature has been disabled ENABLING AUTOMATIC SAFETY RETRACT Similarly you may en able the Automatic Safety Retract feature at any time Do this by first pressing the O
14. ess than 30 seconds 20 www hightechpet com High Tech Pet Products Inc TOTAL PET CONTROL ACCESSORIES High Tech Pet Products Inc SOUND BARRIER Model SBR 1 Indoor Sonic alarm keeps your pet off furniture away from the kitchen table or out of an entire room Operated from your pet s MS 4 or MS 5 transmitter included with your POWER PET Door Also operated by the optional RC 7000X collar Order one for each pet restricted area YARD BARRIER Model YBR 1 Outdoor Sonic Alarm keeps your pet out of the garden away from the trash and out of restricted areas with a wall of sound Operated from your pet s standard MS 4 transmitter included with your POWER PET Door Also operated by the optional RC 7000X collar Order one for each part of your yard where pets don t belong HUMANE CONTAIN Model HC 7000X Simply the Most Advanced Most Effective Most Humane electronic pet fence made Complete Electronic Fence Super System includes one Model RC 7000X Multi Function Pet Collar that controls your POWER PET Door and every other TOTAL PET CONTROL COMPATIBLE product we make Order additional collars for additional pets RADIO MAT Model RM 1TX Radio Controlled Scat Pad Keeps Fido off the furniture Radio signal emitted by the paw pad triggers a shock at Fido s collar Also works in non shock sound only mode Requires one Model RC 7000X Multi Function Pet Collar that controls your POWER PET Door and all our TOTAL PET CO
15. igh Tech Pet Products Inc If replacing an internal component here are the workings of the door you will see after removing the back of the door frame MAIN CIRCUIT MOTOR ASSEMBLY BOARD eat pt ee CABLE GUIDE SS oe ee Po ee a i i Lata Mie a a a MA ey yy a S Gaa E MAIN WIRE m OOO ama TTT HARNESS AO si amp SENSOR CABLE iiaa i hts it if POSITION it SWITCHES Hi LOCKING PIN PART OF MAIN a WIRE HARNESS tte SLIDING DOOR PANEL LEFT p si RIGHT B ilii POWER PLUG POWER PLUG l PART OF MAIN PART OF MAIN Ca WIRE HARNESS WIRE EARNED MICROPHONES PART OF SENSOR CABLE ASSEMBLY High Tech Pet Products Inc www hightechpet com 23 ORDER INFORMATION To order extra collars and accessories please visit our website at www hightechpet com or call 1 800 255 1279 eqs a High Tech Pet Products Inc 2476 Palma Drive Suite A Ventura CA 93003 www hightechpet com Rev V 12 13 2012 px with ms4 manual
16. om the door Slowly increase that RANGE Control setting until the panel opens Repeat this for the other sensor Now put the collar on the pet and if necessary readjust the RANGE settings slightly to achieve the desired opening distance Just as your hearing of a conversation can be overpowered by loud noises such as a lawn mower the door sensors can also be overpowered by loud ultrasonic noises Specifically some sprinklers lawn mowers and vacuum cleaners can put out enough noise to temporarily mask the collar signal The POWER PET PX door has a unique feature which indicates when the background noise level is too high Whenever the INSIDE noise is too loud the INSIDE light will flicker or flash on This means you may want to decrease the INSIDE knob setting slightly Likewise whenever the OUTSIDE noise is too high the OUTSIDE light will flicker or flash on This means you may want to decrease slightly the OUTSIDE knob setting A little flickering once in a while is normal A lot of flickering or continuous flashing means the knob is set too high 4 WAY ACCESS CONTROL Individual activation buttons for the inside and outside sensors give you a 4 way access control system You can allow your pet to come in but not go out go out but not come in come in and out or close and lock the door altogether AUTOMATIC CLOSE CONTROL Your POWER PET PX Features a smart sensing circuit that keeps the door panel open as long as it is receiving
17. ould your door panel malfunction during the initial power up loosen each mounting screw and re test b Note that screw covers not pictured are provided to finish the screw holes Once installed the inside screw covers may be removed by twisting CLOCKWISE using a coin or flat head screwdriver Twisting counter clockwise will cause the screw covers to break Initial Power up Plug the AC Adaptor into a nearby 110 VAC wall outlet Plug adaptor cord into the left or right Power Input Jack on the inside frame see page 3 Press the front panel ON button to power up the door Verify the AC light is illuminated Press the manual OPEN button and verify the door panel opens and closes by itself AC and Battery Operation In Battery Back Up Mode the Door Automatically Switches to Battery if AC Power Is Lost Manual Open Button Automatic Battery Power Monitoring Dual Range Controls For Independant Control of Inside and Outside Distance 4 Way Access Control In and Out In Only Out Only Closed High Tech Pet Products Inc www hightechpet com 9 Battery Installation To install the battery open the battery compartment and align the two battery lugs with the two lug sockets on the inner wall of the battery compartment Then press the battery to mate it to the sockets When done the battery should be flush with the wall and the compartment cover should fit comfortably over the installed battery An ins
18. r protection of any pet door made This new absolutely state of the art design represents unquestionably the most advanced most reliable most stylish pet door made anywhere In fact your new POWER PET Fully Automatic Pet Door will be the most sophisticated appliance your pet will ever own 4 www hightechpet com High Tech Pet Products Inc Your POWER PET door package includes e One Pet Transmitter Collar Model MS 4 or MS 5 Ultrasonic Transmitter Collar e 110 volt AC Adapter connects to either Power Input Jack on edge of inside frame e Pre Fabricated Outside Frame e All Required Hardware Wall Adapter Tunnel Rechargeable Battery Battery Charger Kit and Extra Transmitter Collars are sold separately PET COLLAR OPERATED Only the amazing POWER PET door uses our Patented directional ultrasonic sens ing system This system has great advantages over magnetic or radio transmit ter collars Magnetic collars have a f Ultrasonic Collar very limited range making it tough to train the pet to operate the door Radio systems have good range but MSI Directional es open whenever the animal is Signal Microphone within that range even if the ut VO pet Is sitting sleeping or just NAS wandering by The Power Pet s directional ultrasonic system overcomes these prob lems The Pet worn ultrasonic collar emits a highly directional signal which is received by the microphone only when your pet is directly
19. s own weight The door panel weighs only about 2 Ibs AUTO RETRACT FEATURE As an added safety feature the POWER PET also has a sensing system that automatically raises the panel should it encounter an obstruction 10 www hightechpet com High Tech Pet Products Inc on the way down This feature can be defeated in the unusual case that binding or other restriction slows the door closure to the point that it un necessarily retracts See the AUTOMATIC SAFETY RETRACT Section for more information AUTO DEAD BOLT LOCKING FEATURE The POWER PET door uses a spring loaded locking pin which automati cally snaps into Its retaining hole when the movable panel comes to rest in the closed position The pin can only be released when the motor applies tension to the cable This makes it impossible for even the most clever animals and people to raise the panel mechanically THREE DIFFERENT POWER CHOICES Your new POWER PET Door may be operated in three different power modes 1 110 volt AC Wall Outlet Your standard POWER PET Door comes stan dard with a U L approved AC adapter Plug the adapter into a nearby wall outlet for continuous operation 2 AC with Battery Back up You may purchase an optional recharge able battery for use along with your AC adapter If your household electricity should ever fail your POWER PET Door will automatically switch over to battery operation When power is restored the AC adapter will automatically r
20. talled battery is automatically charged whenever the AC Adaptor is powering the door Battery Status Indicators The OK light ts illuminated when the battery is more than one third charged The LOW light illuminates when the battery is less than one third charged Note that during door opening these indicators may reverse for a few seconds when the battery is below one half charge This is nor mal and gives a little advance notice of an impending low battery Battery Operation Whenever AC Power is unavailable and a charged battery is installed the front panel indicators go into a low power mode where they blink every four seconds instead of remaining on continuously This feature allows the battery to power the door for up to two months or 500 openings ADVANCED FEATURES INTRINSICALLY SAFE OPERATION The POWER PET electronic pet door is intrinsically safe It uses an electric motor and cable drive to lift the door panel The panel remains open until the pet collar signal is gone indicating that your pet is clear of the opening When the pet collar signal is gone power to the motor Is turned off and the panel is returned by the force of gravity only Down ward speed is reduced by an electronic brake applied to the reverse mo tion of the motor This brake operates with or without electrical power Because the panel is returned by simple gravity the maximum force that can be applied by the panel when it is closing is limited to it
Download Pdf Manuals
Related Search