TM-J9000/J9100 User`s Manual
Contents
1. During the cleaning process the POWER LED keeps flashing When the cleaning process ends the printer is ready for printing Note Press the CLEANING button only when there is a problem with the printing quality The cleaning process uses some ink so you do not want to run it unnecessarily Do not turn off the printer or open any covers while the POWER LED is flashing Ink Cartridge Life To make your ink cartridges last as long as possible L Do not remove an ink cartridge except when replacing it or transporting the printer _1 Do not turn on or off the printer unnecessarily 1 Do not press the CLEANING button unless printing is faint or uneven Inserting and Replacing Roll Paper A CAUTION Be sure to use roll paper that meets the specifications See the specifications on page 22 of this manual for more details To avoid injuries and or machine failure make sure not to touch anything other than the roll paper when the roll paper cover is open Note Do not use paper rolls that have the paper glued or taped to the core They may cause paper jams To prevent paper jams make sure that nothing obstructs the paper coming out of the paper outlet and do not pull the paper being ejected Do not open the roll paper cover during printing or paper feeding 1 Turn on the printer power 2 Press the roll paper cover open button and open the roll paper cover 3 Ifa roll paper core is inside the printer remove it 42. Install a new paper roll 12 TM J9000 J9100 Note Be sure that the paper comes off the roll in the correct direction 5 Pull out the edge of the paper roll within the range A on the upper side of the case close the roll paper cover and tear off the fed paper roll with the manual cutter Note When the roll paper is disabled you need not to install a paper roll Processing Checks The TM J9000 J9100 is capable of performing the following four actions on a check in a single pass reading magnetic characters scanning the image of both the face and the back and printing a transaction record Flow of Single Pass Processing BOND Insert a check into the feeder section The printer reads the magnetic characters on the check The scanner scans the images of the face and back The validation section prints the transaction record and the check is fed to the outlet Notes on Processing Checks O OC O L E Do not use checks smaller than 152 x 68 mm 5 98 x 2 68 in W x H Do not use checks larger than 230 x 100 mm 9 06 x 3 94 in W x H Do not use copy paper or other multi ply paper Make sure that the checks have no curl bending especially on the corners warpage or wrinkles Do not use checks with paper clips staples adhesive tape or other foreign materials attached Do not open the covers while printing and processing are in progress Notes on Using the Image Scanner The printer uses the
3. TM J9000 9100 5 Take anew ink cartridge out of its packaging and remove the yellow tape PE VI A CAUTION Do not remove any tape on which the EPSON logo is printed 6 Carefully insert a new ink cartridge from the top and push it firmly but gently until it clicks in place See the picture below to make sure the inserting direction is correct Color Black TM J9 100 7 Close the ink cartridge cover firmly until it clicks in place The INK OUT LED will now go off When you first use the printer installing an ink cartridge begins charging the ink supply This operation lasts approximately one minute The POWER LED flashes during this operation When you replace an ink cartridge after the first time you use the printer the POWER LED will flash for a short time before the printer is ready to print Note Do not turn off the power or open any cover while the POWER LED is flashing This causes the printer to restart the ink charging which wastes ink When the POWER LED stops flashing and stays on the printer is ready for printing Handling Used Ink Cartridges Dispose of the used ink cartridges as industrial waste Also observe the laws in your country and district for the disposal method TM J9000 J9100 11 Cleaning the Print Head When printing becomes faint or uneven although the INK OUT LED is not lit or flashing press the CLEANING button for more than three seconds to run print head cleaning
4. cover or turn off the printer while the POWER LED is flashing 8 TM J9000 J9100 A WARNING If a machine failure has occurred while the included power switch cover is attached unplug the power cable immediately Continued use may result in a fire hazard The power switch cover is intended to prevent the power switch from being pressed accidentally To use the cover place it over the power switch When turning on or off of the switch is required insert a pointed object into one of the holes of the cover and press lt the switch When the printer is stored or not in use for an extended period turn off the power switch and disconnect the power cord Installing and Replacing the Ink Cartridge A CAUTION Keep the ink cartridges out of the reach of children Do not drink the ink Do not disassemble or refill ink cartridges Do not store ink cartridges in high or freezing temperatures Do not remove the ink cartridge except when replacing it or preparing the printer for shioment Before using the cartridge you must remove the yellow tape or printing will not be possible For good printing quality do not remove the ink cartridge from its clear plastic packing until immediately before its installation Use up the cartridge within six months after unpacking it Use up the ink cartridge by the date indicated on the cartridge box or the ink cartridge itself Do not puncture the convex part of the bottom of the ink cart
5. image scanner to read checks Be sure to use a USB interface because the image scanner requires it If you are using an optional UB series interface no image data can be obtained TM J9000 J9100 13 Inserting Checks With the Non Auto Sheet Feeder Non ASF Model 1 Wait until the VALIDATION FEEDER LED starts flashing Then insert the check straight with its face the side on which magnetic characters are printed facing the front of the printer continuously touching the feeder guide with the bottom of the check until it stops as shown in the picture below 2 When the check is pulled into the printer release it immediately With the Auto Sheet Feeder ASF Model With the ASF model printers you can put up to 25 checks in the feeder guide to be fed automatically See Attaching the Pocket only for the ASF model on page 5 for instructions on attaching the pocket and then insert the checks As shown in the picture below align the checks on the right bottom corner before you insert them into the feeder guide Note Align the checks neatly on the bottom right corner as shown in the image before insertion so that they will be fed one by one If the checks are inserted without being aligned the checks may not be fed at all or a paper jam or incorrect feeding of multiple checks may result y 34567890 BOOO Ejecting Checks When a check is ejected and the VALIDATION FEEDER LED flashes again remove the check 14
6. in 466 389 x 180 x 232 mm with ASF 18 3 15 3 x 7 09 x 9 13 in With ASF 5 2 kg 11 5 Ib ASF and ink cartridge included roll paper not included Without ASF 4 9 kg 10 8 Ib ASF and roll paper not included ink cartridge included cpi characters per inch 25 4 mm Ips lines per second dpi dots per inch 25 4 mm TM J9000 J9100 23 Image Scanner Specifications Image Scanner type CIS Contact Image Sensor scanning Data transmission RAW format Scanning area Check W x L 100 x max 230 mm 100 mm fixed 3 94 x max 9 06 in 3 94 in fixed Card W x L 56 x 90 mm 2 20 x 3 54 in area cannot be set Scanning speed Check 300 mm s 11 81 in s Card 120 mm s 4 72 in s Scanned media Check normal paper Card ISO IEC7810 compliant Curvature Card 2 mm 0 079 in or less ISO IEC 7810 allowance 24 TM J9000 J9100 Check W x L 68 100 x152 230 mm min 68 x 152 mm 2 64 3 84 x 5 98 9 06 in min 2 64 x 5 98 in Card W x L 58 92 54 18 x 85 47 85 90 mm 2 123 2 133 x 3 365 3 382 in Check single ply 0 09 0 13 mm 0 00354 0 00512 in Card 0 5 0 84 mm 0 020 0 033 in 1 000 000 sheets total of both sides scanning on check and card scanning Printed on Recycled Paper Printed in China 2004 08
7. is off line and when the roll paper is out or the printer cover is open _J Flashes when an error occurs See the Troubleshooting on page 19 of this manual for more information TM J9000 19100 7 INK OUT LED L Flashes when the ink is almost out You can continue printing L Comes on when no ink cartridge is installed or the ink is out The printer goes off line and the ERROR LED comes on Note The TM J9000 has an INK OUT LED for BLACK only whereas the TM J9100 has LEDs for both BLACK and COLOR PAPER OUT LED Comes on when the roll paper is out or almost out VALIDATION FEEDER LED L Comes on when the printer is ready to process checks 1 Flashes when the printer is waiting for check insertion or removal ID CARD LED L Comes on when the printer is ready to process ID cards L Flashes when the printer is waiting for card insertion or removal CLEANING Button When printing becomes faint or uneven press this button for more than three seconds The printing section inside the printer will be cleaned automatically and the printing will be back to normal Note Press this button for more than three seconds only when the INK OUT LED is not lit or flashing Pressing the CLEANING button unecessarily leads to a waste of ink FEED Button Press this button to feed the roll paper Power Switch and Power Switch Cover Press the power switch to turn on or off the printer Note Never open a
8. section Locking wire saddle Power supply connector USB connector DIP switch 2 Note DIP Switch 2 is intended for switching the interface Do not change the position of the DIP switch 2 except when changing the interface Hooking the USB cable on the locking wire saddle prevents the cable from falling off Unpacking The following items are included for the standard specification printer If any item is damaged contact your dealer Printer _I Roll paper Ink cartridge LI User s Manual this manual Power switch cover L Feeder guide Instruction sheet L Ink cartridge manual Pocket only for the ASF model O L L L L 4 TM J9000 J9100 Attaching the Feeder Guide Feeding paper using the included feeder guide allows you to insert a check straight Also the auto sheet feeder ASF model printers can feed up to 25 checks without manual feeding Follow these steps to attach the feeder guide 1 Hold the edge of the feeder guide carefully 2 Insert the dowels of the feeder guide into the holes on the feeder guide then move it down until it stops in place Dowel of the feeder guide Attaching the Pocket only for the ASF model A pocket is provided with each auto sheet feeder ASF model printer Follow the steps shown below to attach the pocket 1 Push down the pocket cover on the left of the printer and remove it Note To attach the cover again insert the cover while pushing it up TM J9
9. spotlights fluorescent lights or other excessive lights L When the glass of the scanner is damaged by sand or other foreign materials TM J9000 J9100 15 Note on Using the Image Scanner The printer uses the image scanner to read cards Use a USB interface because the image scanner requires it If you use the optional UB series interface no image data can be obtained Inserting Cards 1 Wait until the ID LED starts flashing 2 Insert the card straight with its read side facing the ink cartridge cover with the bottom of the card continuously touching the card slot until it stops as shown in the picture below 3 When the card is pulled into the printer release it immediately Note When the card is pulled into the printer a part of it comes out of the card carrier slit at the back of the printer Be sure not to block this slit Doing so may cause incorrect reading of data Card carrier slit a 4 When the card is ejected and ID LED flashes again pull the card straight out of the slit Note Do not touch the card when it is being ejected Doing so may cause distortion and other problems with the image data Cleaning the Image Scanner If the glass of the scanner gets soiled from ink or paper dust the quality of the image data may deteriorate Follow these steps to clean the glass 16 TM J9000 9100 1 Put your fingers on the pocket on the right side of the printer unlock the scanner cover and rem
10. 000 J9100 5 2 Make sure that the ejection lever is open If it is closed open it The ejection lever is open The ejection lever is closed Note Be careful not to hurt your fingers on the lever edge 3 Position the pocket as shown in the picture below and push it into the printer until it clicks in place Insert the hooks on the four corners of the pocket into the holes indicated with the circles and move the pocket into place 4 Unfold the stopper of the pocket as shown in the following picture stopper i 6 TM J9000 J9100 Note To remove the pocket place the printer vertically as shown in the picture below then while pushing up the lever on the bottom of the pocket slightly push the pocket backward and then pull it up KAO Push up the lever POWER LED E POWER LED ERROR LED es ERROR LED a CLEANING INK LED Black INK LED Black INK LED Color gum eos Unused a PAPER OUT LED aO PAPER OUT LED M O VALIDATION ear VALIDATION oad FEEDER LED m cot FEEDER LED mm OO ID LED me Cg ID LED ee a 0 TM J9100 Two color model TM J9000 Single color model POWER LED L Comes on when the printer power is on L Flashes during cleaning and other operations such as power on and power off Note Never open a cover or turn off the printer while the POWER LED is flashing ERROR LED L Comes on when the printer
11. TM J9000 J9100 Cleaning the MICR Unit Dirt on the MICR unit may cause frequent magnetic character reading errors Use a cleaning sheet to clean the MICR unit regularly at least every six months Use the following cleaning sheet or an equivalent commercialy available cleaning sheet PRESAT Brand KIC CHECK READER CLEANING CARD Note Do not use sticky cleaning sheets They may cause a paper jam or machine failure Be sure to dispose of used cleaning sheets Follow these steps to clean the MICR unit 1 Turn off the printer 2 Open the roll paper cover and turn on the printer while pressing the CLEANING button 3 Press the CLEANING button once and close the roll paper cover 4 Insert a cleaning sheet With the ASF model printers insert a cleaning sheet while pulling the lever on the back of the printer se With the non ASF model Insert the check in With the ASF model the same way as described in Inserting Checks on page 14 Scanning ID Card Image Data Notes on ID Card Reading L1 Make sure that the ID card is flat and does not have excessive bending cracks folds or embossing L Do not touch the external terminal when using an IC card _I Do not insert anything other than cards L Do not open any covers while an operation is in progress In the following situations appropriate quality of the image data is not guaranteed L When the image scanner section is exposed to sunlight
12. TM J9000 J9100 User s Manual 405074700 All rights reserved No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the prior written permission of Seiko Epson Corporation No patent liability is assumed with respect to the use of the information contained herein While every precaution has been taken in the preparation of this book Seiko Epson Corporation assumes no responsibility for errors or omissions Neither is any liability assumed for damages resulting from the use of the information contained herein Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages losses costs or expenses incurred by purchaser or third parties as a result of accident misuse or abuse of this product or unauthorized modifications repairs or alterations to this product or excluding the U S failure to strictly comply with Seiko Epson Corporation s operating and maintenance instructions Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by Seiko Epson Corporation EPSON and ESC POS are registered trademarks of Seiko Epson Corporation NOTICE The contents of this manual are s
13. against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense FOR CANADIAN USERS This Class A digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe A est conforme a la norme NMB 003 du Canada TM J9000 9100 Important Safety Information This section presents important information intended to ensure safe and effective use of this product Read this section carefully and store it in an accessible location Key to Symbols The symbols in this manual are identified by their level of importance as defined below Read the following carefully before handling the product A WARNING Warnings must be followed carefully to avoid serious bodily injury A CAUTION Cautions must be observed to avoid minor injury to yourself or damage to your equipment Safety Precautions A WARNING Shut down your equipment immediately if it produces smoke a strange odor or unusual noise Continued use may lead to fire Immediately unplug the equipment and contact your dealer or a Seiko Epson service cente
14. ge Exclusive ink cartridge Exclusive ink SJIC8CK cartridge For color 1 SJIC6 K For color 2 SJIC7 R SJIC7 B SJIC7 G Power supply 24 VDC 10 E consumption Operating Mean approx 1 0A Peak approx 3 5A Standby Mean approx 0 2A 22 TM J9000 J9100 Interface Receive buffer Bar code Reliability Life Mechanism Print head Consumables Temperature Operating Storage Humidity Operating Storage Overall dimension W x H x D The parenthesis indicates the dimension not including the protrusion Mass approx USB 2 0 needed when using the image scanner UB series options UB SO1 UB PO2II UB E02 4K bytes fixed UPC A UPC E JAN13 EAN13 JAN8 EANB CODE39 ITF CODABAR NW7 CODE93 CODE128 12 000 000 lines carriage 6 000 000 strokes including those for receipt validation printing 1 600 000 000 shots nozzle shots are defined as the number of pulses energized for the print head Ink cartridge 20 000 000 characters using font B with EPSON standard print pattern in economy mode 10 35 C 50 to 95 F 10 40 C 50 to 104 F ao packed ink not filled 20 60 C 4 to 140 F within 120 hours at 20 C 4 F or 60 C 140 F With ink filled 20 40 C 4 104 F 20 80 non condensing 20 80 non condensing When packed ink not filled 5 85 With ink filled 20 85 310 236 x 180 x 232 mm_ without ASF 12 2 9 29 x 7 09 x 9 13
15. med paper or card TM J9000 9100 19 Feeder Section and Card Section 1 Put your fingers on the pocket on the right of the printer unlock the scanner cover and remove it upward 2 Put your fingers on the tab marked Pull Open and pull down the scanner unit Note When pulling down the scanner unit avoid knocking it against the table or any other object to protect it from an excessive impact 3 Remove the jammed paper or card 4 Reverse the steps above to return the scanner unit to its original position Note If the scanner unit is not pushed in properly a cover open error occurs and the ERROR LED comes on 20 TM J9000 J9100 Roll Paper Section 1 Press the roll paper cover open button and open the roll paper cover 2 Remove the jammed paper 3 Reinstall the paper roll and close the roll paper cover Validation Section If the jammed paper cannot be removed easily open the ink cartridge cover to remove the paper EPSON Ecology Label This product is in compliance with the EPSON ecology label requirements See the following link http www epson co jp e for detailed information on label criteria Obtaining the Printer Driver and Technical Reference Guide Download the driver from the following web site to control the universal serial bus USB The technical reference guide describing related information on TM J9000 J9100 development can also be downloaded from this web si
16. ove it upward 2 Put your fingers on the tab marked Pull Open and pull down the scanner unit Note When pulling down the scanner unit avoid knocking it against the table or anything else to protect it from an excessive impact 3 Lightly wipe the glass shown in the picture with a soft dry cloth A CAUTION Do not use synthetic detergent benzine water or other liquid for cleaning Doing so may result in a stain When the glass of the scanner is smeared with oil grease or other unremovable substance wipe it with a cloth lightly dipped in alcohol When cleaning never apply any liquid directly to the glass of the scanner 4 Press the section marked Close indicated by the circle in the picture below then push in the scanner unit until it clicks in place TM J9000 J9100 17 Note If the scanner unit is not pushed in properly a cover open error occurs and the ERROR LED comes on 5 To attach the scanner cover push it down into the connecting part firmly until it clicks in place Validation Printing Notes on Validation Printing _1 Do not use paper smaller than 152 x 68 mm 5 98 x 2 68 in W x H Do not use paper larger than 230 x 100 mm 9 06 x 3 94 in W x H m _1 Do not use carbon paper or other multi ply paper L Make sure that the paper has no curl bending especially on the m m corners warpage or wrinkles Do not use paper with paper clips staples adhesive
17. r for advice Never attempt to repair this product yourself Improper repair work can be dangerous Never disassemble or modify this product Tampering with this product may result in injury or fire Be sure to use the specified power source Connection to an improper power source may cause fire Do not allow foreign matter to fall into the equipment Penetration by foreign objects may lead to fire If water or other liquid spills into this equipment do not continue to use it Continued use may lead to fire Unplug the power cord immediately and contact your dealer or a Seiko Epson service center for advice Seiko Epson recommends using the designated EPSON AC adapter PS 180 for the printer 2 TM J9000 J9100 A CAUTION Do not connect cables in ways other than those mentioned in this manual Different connections may cause equipment damage and burning Be sure to set this equipment on a firm stable horizontal surface Product may break or cause injury if it falls Do not use in locations subject to high humidity or dust levels Excessive humidity and dust may cause equipment damage or fire Do not place heavy objects on top of this product Never stand or lean on this product Equipment may fall or collapse causing breakage and possible injury To ensure safety unplug this product before leaving it unused for an extended period Before moving the product unplug if and unplug all cables connected to it If ink leaks ou
18. ridge or remove the transparent film on the bottom of the ink cartridge otherwise ink may leak A used cartridge may have some ink on the convex part of the bottom of the cartridge Avoid touching that part fo keep your hands clean Seiko Epson recommends using genuine EPSON cartridges for your printer Products of other manufacturers may cause damages that are not covered by EPSON s warranties TM J9000 J9100 9 When the INK OUT LED flashes it is almost time to change the ink cartridge Change the cartridge as soon as it is convenient When the INK OUT LED comes on printing stops and you must change the cartridge The TM J9100 has two separate cartridges one each for black and colored ink red green or blue Therefore the TM J9100 has two INK OUT LEDs one for BLACK and one for COLOR The TM J9000 has only one INK OUT LED for BLACK Follow these steps to install an ink cartridge for the first time or to replace an empty ink cartridge 1 Make sure the printer power is on If it is not on plug in the power supply cable and press the power switch on the front bottom right of the printer 2 Make sure the INK OUT LED is lit or flashing When using both the black ink and colored ink check which of the ink cartridge INK OUT LEDs is lit or flashing 3 Hold the tab and open the ink cartridge cover 4 Hold the knob at the top of the empty ink cartridge and lift the cartridge out of the printer TM J9100 10
19. t of the printer wipe up the ink with a cloth or similar material immediately and contact your dealer or a Seiko Epson service center for advice Notes on Usage _1 When using the printer do not open the covers 1 Protect the printer from impact 1 Do not apply excessive force to the printer case _1 Do not place food or beverages such as coffee on the printer case Notes on Installation Be sure that the printer is installed horizontally Do not install the printer in a dusty place Install the printer away from magnetic devices Cables or other foreign objects must not be caught on the printer Because cards are ejected toward the back of the printer allow at least 60 mm 2 36 behind the printer when installing it O C O L L Notes on Transportation 1 Remove the ink cartridge before transporting the printer After transportation install a new ink cartridge 2 Keep the printer upright and horizontal during transportion 3 Be sure not to ship ink cartridges that have been removed from the packing Ink may leak TM J9000 J9100 3 Purpose of This Manual This manual describes basic operations for operators of the single color black ink TM J9000 printer and the two color black and red green blue TM J9100 printer to enable safe and correct use of the printer Part Names Roll paper section a Feeder Roll paper cover open button Card entrance Cartridge cover tab Power switch Validation
20. tape or other foreign materials attached Do not open any covers while the operation is in progress Follow the steps below to run validation printing 1 Wait until the VALIDATION FEEDER LED starts flashing 18 TM J9000 9100 2 From above the validation section insert a validation paper straight into the slot keeping the right side of the paper at the marked point shown in the following note Note Keep the edge of the validation paper in the position shown on the label in the picture below Label indicating the insertion position 3 When the validation paper is ejected and the VALIDATION FEEDER LED starts flashing pull the paper straight out of the printer Troubleshooting ERROR LED is flashing or lit _1 The printer stops printing when the print head temperature goes up or down to an abnormal value Printing restarts automatically when the print head temperature returns to normal _ Make sure that the printer covers are properly closed 1 Ifa paper jam has occurred remove the jammed paper referring to the next section Paper Jams _1 Turn off the printer and then turn it on after a while If the error persists consult a qualified service person for repair _J When no ink cartridge is installed the ERROR LED comes on Install an ink cartridge _ When the roll paper is enabled but no paper roll is installed the ERROR LED comes on Install a paper roll Paper Jams Follow these steps to remove the jam
21. te Customers in North America http pos epson com Customers in the Other Areas http www epson pos com Select the product name in the Select any product pulldown menu TM J9000 J9100 21 IM J9000 J9100 Specifications Print method serial ink jet dot matrix serial ink jet dot 64 nozzles x line matrix 64 nozzles x 2 lines Print density 180 x 180 dpi Font A Font B 12 x 24 9 x 17 Can be changed to 11 x 24 8 x 17 by using memory switches See the Technical Reference Guide for details Columns standard Font A Font B Validation Transaction 62 82 Roll paper 40 53 Character size W x Font A Font B H standard 1 69 x 3 38 mm 1 27 x 2 40 mm Character w 95 alohanumeric 48 international characters S x 11 including a user defined page graphic Print speed Validation Font A Economy mode 7 5 lps Validation Font B Economy mode 11 Ips Roll paper Font A Economy mode 10 1 Ips Roll paper Font B Economy mode 14 3 Ips Paper Validation Feeder Type Normal Dimension H x W 68 100 x 152 230 mm 2 68 3 94 x 5 98 9 06 in minimum 68 mm x 152 mm 2 68 x 5 98 in Thickness only single ply paper can be used 0 09 0 13 mm 0 0035 to 0 0051 in Roll paper Type Normal Width 76 0 5 mm Maximum outside roll diameter 60 mm Spool inside diameter 10 mm or more ASF unit ae supply only for the Number of sheets that can be loaded 25 sheets ASF model or fewer Ink cartrid
22. ubject to change without notice Copyright 2004 by Seiko Epson Corporation Nagano Japan DIP Switch Tables DIP switch 1 Function On DIP switch 2 Function USB connector side UB series connector side Interface selection USB available UB series available ii TM J9000 J9100 User s Manual EMC and Safety Standards Applied Product Name TM J9000 9100 Model Name M198A The following standards are applied only to the printers that are so labeled EMC is measured using SEIKO EPSON s AC adapter PS 180 Europe CE marking Safety TUV EN60950 North America EMI FCC ICES 003 Class A Safety UL 60950 CSA C22 2 No 60950 Oceania EMC AS NZS 3548 CISPR 22 Class A WARNING The connection of a non shielded printer interface cable to this printer will invalidate the EMC standards of this device You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation could void your authority to operate the equipment CE Marking The printer conforms to the following Directives and Norms Directive 89 336 EEC EN 55022 Class A EN 55024 IEC 61000 4 2 IEC 61000 4 3 IEC 61000 4 4 IEC 61000 4 5 IEC 61000 4 6 IEC 61000 4 8 IEC 61000 4 11 FCC Compliance Statement For American Users This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection
Download Pdf Manuals
Related Search