FAVORIT 65011 VI
Contents
1. 2 Add the rinse aid in the container The maximum level for filling is indicated by max The dispenser holds about 110 ml of rinse aid which is sufficient for be tween 16 and 40 dishwashing cycles depending upon the dosage setting 3 Ensure that the lid is closed after every refill Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash Daily use Adjusting the dosage of rinse aid i According to the finish and drying results obtained adjust the dose of rinse aid by means of the 6 position selector position 1 minimum dosage position 6 maxi mum dosage The dose is factory set in position 4 Increase the dose If there are drops of water or lime spots on the dishes after washing Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades Daily use Check if it s necessary to refill with dishwasher salt or rinse aid Load cutlery and dishes into the dishwasher Fill with dishwasher detergent e Select a wash programme suitable for the cutlery and dishes Start the wash programme Load cutlery and dishes Sponges household cloths and any object that can absorb water may not be washed in the dishwasher e Before loading the dishes you should Remove all left over food and debris Soften remnants of burnt food in pans BETA Load cutlery and dishes e Wh2. tergent manufacturer e The water in your dishwasher is not for drinking Detergent residues may still be present in your machine e Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded In this way you will avoid anybody tripping over the open door and hurting themselves e Do not sit or stand on the open door Child safety e This appliance is designed to be operated by adults Don t allow children to use the dishwasher unsupervised e Keep all packaging well away from children There is risk of suffocation e Keep all detergents in a safe place out of children s reach e Keep children well away from the dishwasher when the door is open Installation e Check your dishwasher for any transport damage Never connect a damaged machine If your dishwasher is damaged contact your supplier e All packaging must be removed before use e Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person e Forsafety reasons it is dangerous to alter the specifications or attempt to modify this product in any way e Never use the dishwasher if the electrical supply cable and water hoses are damaged or if the control panel work top or plinth area are damaged such that the inside of the appliance is freely accessible Contact your local Service Force centre in order to avoid hazard e Allsides of the dishwasher must never be drilled to
3. 12 Use of dishwasher salt 13 Use of rinse aid 14 Adjusting the dosage of rinse aid 15 Daily use 15 Load cutlery and dishes 15 The lower basket 17 The cutlery basket 17 The upper basket 19 Adjusting the height of the upper basket 19 Use of detergent 20 Fill with detergent 20 Multi tab function 21 Activation deactivation of the Multitab function 22 Washing programmes 23 Select and start a washing programme 24 Contents Unloading the dishwasher 26 Care and cleaning 27 Cleaning the filters 27 Cleaning the spray arms 28 External cleaning 28 Internal cleaning 28 Prolonged periods of non operation 29 Frost precautions 29 Moving the machine 29 What to do if 29 Technical data 32 Hints for test institutes 32 Installation instructions 34 Installation 34 Fixing to the adjacent units 34 Levelling 34 Water connection 35 Water supply connections 35 Water inlet hose with safety valve 35 Water outlet hose connection 36 Electrical connection 37 Environment concerns 38 Packaging material 38 Subject to change without notice Safety information Operating instructions A Safety information In the interest of your safety and to ensure the correct use before installing and first using the appliance read this user manual carefully including its hints and warnings To avoid unnecessary mistakes and accidents it is important to ensure that all people using the appliance are thoroughly familiar with
4. Audible signals i Audible signals have been introduced to help indicate which operations the appli ance is performing e setting the water softener e end of the programme e intervention of an alarm due to malfunction Factory setting audible signals activated It is possible to deactivate the audible signals using the function buttons 1 Press the On Off button The appliance must be in setting mode 2 Simultaneously press and hold function buttons B and C until the light of the function buttons A B and C start flashing 3 Press function button C the lights of buttons A and B turn off while the light of function button C goes on flashing The digital display indicates the current setting Ob Audible signals deactivated b Audible signals activated 4 To change the setting press again function button C the digital display will indicate the new setting 5 To memorize the operation switch off the dishwasher First use Before using your dishwasher for the first time e Ensure that the electrical and water connections comply with the installation instructions e Remove all packaging from inside the appliance e Set the water softener e Pour 1 litre of water inside the salt container and then fill with dishwasher salt e Fill the rinse aid dispenser i If you want to use combi detergent tablets such as 3 in 1 4 in 1 5 in 1 etc set the Multitab function see Multitab function Set the water softe
5. EN 60704 must be carried out with appliance fully loaded and using the test programme see Washing programmes Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme see Washing programmes Full load 12 standard place settings Amount of detergent required 5g 25 g Type B Rinse aid setting position 4 Type III Example loading arrangements Upper basket 1 Hints for test institutes eS Oke oe BOS J 4 Ni i Ce S l A aes I vel JIN ENA e C lt A L si PK ZF JV KU Lower basket with cutlery basket Cutlery basket CMCC BS Ks ZS 2S R ae gt 7 7 Wit al Ie ER 1 If there are cup racks in place on the lefthand side remove them A fT _ VN nnn Installation Installation instructions Installation AN WARNING Any electrical and or plumbing work required to install this appliance should be carried out by a qualified electrician and or plumber or competent person Remove all packaging before positioning the machine If possible position the machine next to a water tap and a drain This
6. dishwasher is designed to be fitted under a kitchen counter or work surface Attention Carefully follow the instructions on the enclosed template for building in the dishwasher and fitting the furniture panel No further openings for the venting of the dishwasher are required but only to let the water fill and drain hose and power supply cable pass through The dishwasher incorporates adjustable feet to allow the adjustment of the height During all operations that involve accessibility to internal components the dishwasher has to be unplugged When inserting the machine ensure that the water inlet hose the drain hose and the supply cable are not kinked or squashed Fixing to the adjacent units The dishwasher must be secured against tilting Therefore make sure that the counter it is fixed under is suitably secured to a fixed structure adjacent kitchen unites cabinets wall Levelling Good levelling is essential for correct closure and sealing of the door When the appliance is correctly levelled the door will not catch on either side of the cabinet If the door does not close correctly loosen or tighten the adjustable feet until the machine is perfectly level Water connection Water connection Water supply connections i Connection to a cold water supply is advised If connection is made to a hot water supply the maximum permissible temperature is 60 C A hot water supply is not always efficient with very
7. its operation and safety features Save these instructions and make sure that they remain with the appliance if it is moved or sold so that everyone using it through its life will be properly informed on appliance use and safety Correct use This dishwasher is only intended for washing household utensils suitable for machine washing Do not put any solvents in the dishwasher This could cause an explosion Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket Only use products detergent salt and rinse aid suitable for dishwashers Avoid opening the door whilst the appliance is in operation hot steam may escape Do not take any dishes out of the dishwasher before the end of the dishwashing cycle After use isolate the appliance from the power supply and turn off the water supply This product should be serviced only by an authorised service engineer and only genuine spare parts should be used Under no circumstances should you attempt to repair the machine yourself Repairs carried out by inexperienced persons will cause injury or serious mal functioning Contact your local Service Force Centre Always insist on genuine spare parts DAW Safety information General safety e Dishwasher detergents can cause chemical burns to eyes mouth and throat Could endanger life Comply with the safety instructions of the dishwasher de
8. soiled crockery as it shortens the washing programmes a lot For making the connection itself the coupling nut fitted to the machine s supply hose is designed to screw onto a 3 4 gas thread spout or to a purpose made quick coupling tap such as the Press block The water pressure must be within the limits given in the Technical specifications Your local Water Authority will advise you on the average mains pressure in your area The water inlet hose must not be kinked crushed or entangled when it is being connected The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut The locknut must be correctly fitted to avoid water leaks Attention NOT all models of dishwashers have fill and drain hoses provided with locknut In this case this kind of facility is not possible If the machine is connected to new pipes or pipes which have not been used for a long time you should run the water for a few minutes before connecting the inlet hose DO NOT use connection hoses which have previously been used for an old appliance This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system This appliance complies with the applicable plumbing regulations Water inlet hose with safety valve After connecting the double walled water inlet hose the safety valv
9. FAVORIT 65011 VI User manual Dishwasher A i Q Dear Customer Thank you for choosing one of our high quality products With this appliance you will experience the perfect combination of functional design and cutting edge technology Convince yourself that our appliances are engineered to deliver the best performance and control indeed we are setting the highest standards of excellence In addition to this you find environmental and energy saving aspects as an integral part of our products To ensure optimal and regular performance of your appliance please read this instruction manual carefully It will enable you to navigate all processes perfectly and most efficiently To refer to this manual any time you need to we recommend you to keep it ina safe place And please pass it to any future owner of the appliance We wish you much joy with your new appliance The following symbols are used in this user manual Important information concerning your personal safety and information on how to avoid damaging the appliance General information and tips Environmental information 117970140 022008 Contents Contents Operating instructions 5 Safety information 5 Correct use 5 General safety 6 Child safety 6 Installation 6 Product description 7 Control panel 8 Setting mode 9 Audible signals 10 First use 10 Set the water softener 11 Setting manually 11 Setting electronically
10. ardness setting to the highest setting and perform 1 normal washing programme without loading any dishes 4 Adjust the water hardness setting according to the hardness of the water in your area 5 Adjust the rinse aid dosage Washing programmes Programme Degree of Type of Programme description Consumption val soil load ues cD T 5 v 2 l e2 q 5 8 49 e e ile 2 x z g SE lo s a elz o 2 amp amp INTENSIV Heavy soil Crockery e gt o o 2 gt g CARE 70 cutlery T PA e pots and Q 2 pans Sa AUTO Mixed nor Crockery se o Q gt g mal and cutlery T i X heavy soil pots and Q Be a pans 30 MIN Light soil Crockery e aje and cutlery Select and start a washing programme Programme Degree of Type of Programme description soil load g g 7 e tee amp 2 S 5 a z 2 a E es D U ala E 5 ev e ic a finn zZ ECO 504 Normal Crockery e e ee o 2 ze soil and cutlery 4 z x 2 Any Partial load CY sy S to be com pleted later in the day 5 1 The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes 2 During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is The programme duration water and energy consumption leve
11. are due to the lack of simple maintenance or oversights which can be solved with the help of the indications described in the chart without calling out an engineer Switch off the dishwasher and carry out the following suggested corrective actions What to do if Fault code and malfunction Possible cause and solution e continuous flashing of the light of the run ning programme e point shaped optical signal is flashing e appears in the digital display e intermitted audible signal The dishwasher does not fill with water e continuous flashing of the light of the run ning programme e point shaped optical signal is flashing e CL appears in the digital display e intermitted audible signal The dishwasher will not drain e continuous flashing of the light of the run ning programme e point shaped optical signal is flashing iJ appears in the digital display e intermitted audible signal Anti flood device is activated The programme does not start he water tap is blocked or furred with lime scale Clean the water tap The water tap is turned off Turn the water tap on The filter where present in the threaded hose fitting at the water inlet valve is blocked Clean the filter in the threaded hose The water inlet hose has not been correctly aid or it is bent or squashed Check the water drain hose connection The sink spigot is blocked Clean out the sink spigot The water drain h
12. arranged in such a way as to stop water reaching all parts of the surface The baskets must not be overloaded e The spray arms do not rotate freely due to ncorrect arrangement of the load e The filters in the base of the washing com partment are dirty or incorrectly positioned e Too little or no detergent has been used e Where there are limescales deposits on the dishes the salt container is empty or the in correct level of the water softener has been set e The drain hose connection is not correct e The salt container cap is not properly closed Rinse aid was not used e The rinse aid dispenser is empty The dishes are wet and dull There are streaks milky spots or a bluish coating Decrease rinse aid dosing on glasses and dishes Water drops have dries onto glasses and dishes Increase rinse aid dosing The detergent may be the cause Contact the detergent manufacturer s consumer care line Technical data If after all these checks the problem persists contact your local Service Force Cen tre Technical data Dimension Width height depth cm 59 6 x 81 8 89 8 x 55 5 Electrical connection Voltage Information on the electrical connection is given on the rating Overall power Fuse plate on the inner edge of the dishwasher s door Water supply pressure Minimum 0 05 Mpa 0 5 bar Maximum 0 8 Mpa 8 bar Capacity Place settings 12 Hints for test institutes Testing in accordance with
13. ckproof socket Multi way plugs connectors and extension cables must not be used This could constitute a fire hazard through overheating If necessary have the domestic wiring system socket replaced In case that the electrical cable has to be replaced contact your local Service Force centre The plug must be accessible after the appliance has been installed Never unplug the appliance by pulling on the cable Always pull the plug The manufacturer accepts no liability for failure to observe the above safety pre cautions Environment concerns Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local council your household waste disposal service or the shop where you purchased the product Packaging material The packaging materials are environmentally friendly and can be recycled The plastic components are identified by markings e g gt PE lt gt PS lt etc Please dispose of the packaging materials in the appropriate c
14. clogged the holes in the spray arms remove them with a cocktail stick External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth If necessary use only neutral detergents Never use abrasive products scour ing pads or solvent acetone trichloroethylene etc Internal cleaning Ensure that the seals around the door the detergent and rinse aid dispensers are cleaned regularly with a damp cloth We recommend every 3 months to run the wash programme for heavy soiled dishes using detergent but without dishes What to do if Prolonged periods of non operation If you are not using the machine for any prolonged period of time you are advised to 1 Unplug the appliance and then turn off the water 2 Leave the door ajar to prevent the formation of any unpleasant smells 3 Leave the inside of the machine clean Frost precautions Avoid placing the machine ina location where the temperature Is below 0 C If this is unavoidable empty the machine close the appliance door disconnect the water inlet pipe and empty it Moving the machine If you have to move the machine moving house etc 1 Unplug it 2 Turn the water tap off 3 Remove the water inlet and discharge hoses 4 Pull the machine out together with the hoses Avoid over tilting the machine during transportation What to do if The dishwasher will not start or stops during operation Certain problems
15. e Wooden platters immediately if it is not to be washed straight e Items made from synthetics fibres after use e Pewter or copper items Open the door and slide out the baskets to load the dishes Load cutlery and dishes The lower basket Load larger and heavily soiled dishes and pans in the lower basket AHAAAAAHU A gt OLOLLO A QOOQT SMD 000014 QLD GanG000 0 DOOOCCOCOCOCCEE 1000000000122 333 0 00 E To make it easier to load larger dishes the 2 F plate racks on the right in the lower basket can be folded down D Wk 0 N 3 0 o ZZZ TTT T TAT The cutlery basket A WARNING Long bladed knives stored in an upright position are a potential hazard Long and or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket Take care when loading or unloading sharp items such as knives To ensure that all items of cutlery in the cutlery basket can be reached by the water you should Load cutlery and dishes 1 Place the grid insert on the cutlery basket J133 gt Pe aaadi 3 JJ JJ4 agyayitjijjj nunun aJ JJJJJJ CTENERERE wuajsaaaaad wyaweaa20979 2 Place forks and spoon in the cutlery basket with their handles pointing downwards For larger utensils
16. e is next to the tap Therefore the water inlet hose is only under pressure while the water is running If the water inlet hose starts to leak during this operation the safety valve cuts off the running water Please take care when installing the water inlet hose Water connection e The electrical cable for the safety valve is in the double walled water inlet hose Do not immerse the water inlet hose or the safety valve in water e f water inlet hose or the safety valve is damaged remove the mains plug immediately e A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre AN WARNING Warning Dangerous voltage Water outlet hose connection The end of the drain hose can be connected in the following ways 1 To the sink outlet spigot securing it to the underside of the work surface This will prevent waste water from the sink running into the machine 2 Toa stand pipe provided with vent hole minimum internal diameter 4 cm The waste connection must be at a maximum height of 60 cm from the bottom of the dishwasher The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of 1 i water ii i The sink plug must not be in place when the n machine is draining as this could cause the eee A water to s
17. e will stop Close the door the pro gramme will start from the point at which it was interrupted End of the washing programme 1 The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme When the washing programme has ended the optical signal on the floor beneath the dishwasher s door will turn off Open the dishwasher door The indicator light of the programme Just ended remains illuminated Switch off the dishwasher by pressing the On Off button Leave the dishwasher door ajar and wait a few minutes before removing the dishes in this way they will be cooler and the drying will be improved When the washing programme has finished it is recommended that the dishwasher is unplugged and the water tap turned off Unloading the dishwasher Hot dishes are sensitive to knocks The dishes should therefore be allowed to cool down before removing from the appliance Empty the lower basket first and then the upper one this will avoid water drip ping from the upper basket onto the dishes in the lower one Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes A CAUTION When the washing programme has finished it is recommended that the dishwasher is unplugged and the water tap turned off Care and cleaning Care and cleaning Cleaning the filters The filters must be checked and cleaned from time to
18. en loading the dishes and cutlery please note Dishes and cutlery must not impede the rotation of the spray arms Load hollow items such as cups glasses pans etc with the opening down wards so that water cannot collect in the container or a deep base Dishes and items of cutlery must not lie inside one another or cover each other To avoid damage to glasses they must not touch Lay small objects in the cutlery basket e Plastic items and pans with non stick coatings have a tendency to retain water drops these items will not dry as well as porcelain and steel items e Light items plastic bowls etc must be loaded in the upper basket and arranged so they do not move For washing in the dishwasher the following cutlery and dishes are not suitable are of limited suitability e Cutlery with wooden horn china or mother Only wash stoneware in the dishwasher if it of pearls handles is specially marked as being dishwasher safe e Plastic items that are not heat resistant by the manufacturer e Older cutlery with glued parts that are not Glazed patterns may fade if machine washed temperature resistant frequently Bonded cutlery items or dishes e Silver and aluminium parts have a tendency to discolour during washing Residues e g egg white egg yolk and mustard often cause cred Gel gess discolouring and staining on silver Therefore e Steel items prone to rusting always clean left overs from silver
19. ess and hold the two Multitab buttons D and E until the Multitab function indicator light illuminates This means that the function is ac tive To deactivate the function press the same buttons again until the Multitab func tion indicator light turns off i If the drying results are not satisfactory we suggest that you 1 Fill up the rinse aid dispenser with rinse aid 2 Activate the rinse aid dispenser 3 Set the rinse aid dosage to position 2 e The activation deactivation of the rinse aid dispenser can only be possible with the Multitab function active Activation deactivation of the rinse aid dispenser 1 Press the On Off button The dishwasher must be in setting mode 2 Press simultaneously buttons B and C until the lights of buttons A B and C start flashing 3 Press button B the lights of buttons A and C turn off while the light of button B goes on flashing The digital display indicates the current setting D d Rinse aid dispenser deactivated Washing programmes d Rinse aid dispenser activated 4 To change the setting press button B again the digital display indicates the new setting 5 To memorise the operation switch off the dishwasher by pressing the On Off button i If you decide to turn back to the use of standard detergent system we advise that you 1 Deactivate the Multitab function 2 Fill up the salt container and the rinse aid dispenser again 3 Adjust the water h
20. is equipped with the Multitab function that allows the use of the Multitab combi detergent tablets These products are detergents with a combined cleaning rinsing and salt functions They can also contain other different agents depending on which kind of tablets you choose 3 in 1 4in 1 5 in 1 etc Check whether these detergents are suitable for your water hardness See the manufacturers instructions This function can be selected with all washing programmes With the selection of this function the inflow of rinse aid and salt from each respective supply container Multi tab function is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated Select the Multitab function before the start of a washing programme Once this function is selected indicator light illuminated it will remain active also for the following washing programmes With the use of the Multitab function the cycle durations may change In this case in the digital display the indication of the running time of the programme is automatically updated Once the programme is running the Multitab function can NO longer be changed If you want to exclude the Multitab function you have to cancel the programme setting and then deactivate the Multitab function In this case you have to set a washing programme and desired options again Activation deactivation of the Multitab function Simultaneously pr
21. ls can vary this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled The temperature of the water is automatically adjusted between 45 C and 70 C 3 Ideal for washing a partially loaded dishwasher This is the perfect daily programme made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery 4 Test programme for test institutes 5 This programme does not require the use of detergent Select and start a washing programme i Select the washing programme and delay start with the door slightly opened The start of the programme or the countdown of the delay start will occur only after the closure of the door Until then it is possible to modify the settings 1 Check that the baskets have been loaded correctly and that the spray arms are free to rotate 2 Check that the water tap is opened Press the On Off button The dishwasher must be in setting mode Select and start a washing programme 4 Press the button corresponding to the required programme see Washing programmes chart Close the dishwasher door the programme starts automatically Setting and starting the programme with delay start 1 After having selected the washing programme press the delay start button until the number of hours for the delay start appear in the digital display The start of the selected washing programme can be delayed for betwee
22. n A WARNING After loading your machine always close the door as an open door can be a hazard i Before closing the door ensure that the spray arms can rotate freely Use of detergent i Only use detergents specifically designed for use in dishwashers Please observe the manufacturer s dosing and storage recommendations as stated on the detergent packaging W Using no more than the correct amount of detergent contributes to reducing pol lution Fill with detergent 1 Open the lid Multi tab function 2 Fill the detergent dispenser 1 with detergent The marking indicates the dosing levels 20 approximately 20 g of detergent 30 approximately 30 g of detergent 3 All programmes with prewash need an additional detergent dose 5 10 g that must be placed in the prewash detergent chamber 2 This detergent will take effect during the prewash phase 4 When using detergent tablets place the tablet in compartment 1 5 Close the lid and press until it locks in place i Detergent tablets Detergent tablets from different manu factures dissolve at different rates For this reason some detergent tablets do not at tain their full cleaning power during short washing programmes Therefore please use long washing programmes when us ing detergent tablets to ensure the complete removal of detergent residuals Multi tab function This appliance
23. n 1 and 19 hours 2 Close the dishwasher door the countdown starts automatically 3 The countdown will decrease with steps of 1 hour The opening of the door will interrupt the countdown Close the door the countdown will continue from the point at which it was interrupted 5 Once the delay start has elapsed the programme will start automatically i Once the washing programme has started a point shaped optical signal appears on the floor beneath the dishwasher s door This optical signal will remain illuminated for all the duration of the washing pro gramme If the appliance has been installed higher up with a furniture door mounted flush the optical signal will be no longer visible AN WARNING Interrupt or cancel a washing programme in progress ONLY if it s absolutely necessary Attention Hot steam may escape when the door is opened Open the door carefully Cancelling a delay start or a washing programme in progress e Simultaneously press and hold the two programme buttons positioned over the word RESET until all the programme button lights will illuminate e Cancelling a delay start involves also the cancelling of the washing programme set In this case you have to set the washing programme again e f anew washing programme is to be selected check that there is detergent in the detergent dispenser Unloading the dishwasher Interrupt a washing programme in progress Open the dishwasher door the programm
24. ner Set the water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply which would have a detrimental or adverse effect on the operation of the appliance The higher the content of these minerals and salts the harder your water is Water hardness is measured in equivalent scales Clarke degrees French degrees TH and mmol l millimol per litre international unit for the hardness of water The softener should be adjusted according to the hardness of the water in your area Your local Water Authority can advise you on the hardness of the water in your area Water hardness Adjusting the water hardness Use of salt setting C 64 88 91 125 Sil 125 level 10 yes 53 63 76 90 7 6 8 9 2 level 9 yes 46 52 65 75 6 51 7 5 2 evel 8 yes 36 45 51 64 5 1 6 4 2 level 7 yes 28 35 40 50 4 0 5 0 2 evel 6 yes 23 27 33 39 3 3 3 9 2 level 5 yes 18 22 26 32 2 61 3 2 1 evel 4 yes 13 17 19 25 1 9 25 1 level 3 yes 5 12 7 18 0 71 1 8 1 evel 2 yes lt 5 lt 7 lt 0 7 1 level 1 no The water softener must be set in both ways manually using the water hardness dial and electronically Setting manually i The dishwasher is factory set at position 2 Set the water softener Open the dishwasher door Remove the lower basket from the dishwasher Turn the water hardness dial to posi tion 1 or 2 see table Replace the lowe
25. on of the rinse aid dispenser ONLY with Multitab function active e the end of a washing programme a zero will appear in the digital display e the countdown of the delay start e fault codes concerning malfunction of the dishwasher e activation deactivation of the audible signals Function buttons The following functions can be set with the help of these buttons e setting of the water softener e cancel a washing programme or a delay start in progress e activation deactivation of Multitab function e activation deactivation of the rinse aid dispenser when Multitab function is ac tive e activation deactivation of the audible signals Setting mode i The appliance is in setting mode when all programme lights are illuminated Always remember that when performing operations such as e selecting a washing programme e setting the water softener e activating deactivating the rinse aid dispenser e activating deactivating the audible signals the appliance MUST be in setting mode If a programme light is illuminated the last performed programme is still set In this case to return to setting mode the programme has to be cancelled To cancel a set programme or a programme in progress simultaneously press and hold the two programme buttons positioned over the word RESET until all the programme button lights will illuminate The programme has been cancelled and the machine is now in setting mode First use
26. ontainer at the community waste disposal facilities A WARNING When a unit is no longer being used e Pull the plug out of the socket e Cut off the cable and plug and dispose of them e Dispose of the door catch This prevents children from trapping themselves inside and endangering their lives www electrolux com CE To buy accessories consumables and spare parts at our online shop please visit www aeg electrolux co uk 117970140 022008
27. ose has not been correctly laid or it is bent or squashed Check the water drain hose connection Close the water tap and contact your local Service Force Centre The dishwasher s door has not been properly closed Close the door The main plug is not plugged in Insert the main plug The fuse has blown out in the household fuse box Replace the fuse Delay start has been set If dishes are to be washed immediately cancel the delay start The flashing of the point shaped optical signal on the floor beneath the dishwsher s door will not be visible if the appliance has been installed higher up with a furniture door mounted flush What to do if Once these checks have been carried out switch on the appliance the programme will continue from the point at which it was interrupted If the malfunction or fault code reappears contact the Service Force Centre For other fault codes not described in the above chart please contact your local Service Force Centre quoting the model Mod product number PNC and serial number S N This information can be found on the rating plate located on the side of the dishwasher door So that you always have these numbers at hand we recommend you to make a note of them here Modi aaisa anetari at ehi PNC s Saer inmaia ste peat pIE SAN ATE E The wash results are not satisfactory The dishes are not clean e The wrong washing programme has been se lected e The dishes are
28. prevent damage to hydraulic and electric components Product description A WARNING For electrical and water connection carefully follow the instructions given in specific paragraphs Product description fy Upper basket Water hardness dial Salt container Detergent dispenser Rinse aid dispenser Fal Rating plate Filters FEM Lower spray arm 9 Upper spray arm BEM Control panel Control panel INTENSIV ECO A G cae AUTO somn PAY muita Se a i 3 reset L muttitas f INTENSIV ECO GA Carezo AUTO 30MIN 50 MULTITAB 2 A B c D Ja L RESET L multitaB a Digital display Delay start button Programme selection buttons Indicator lights On Off button Fl Function buttons Indicator lights MULTITAB Indicates the activation deactivation of the Multitab function see Multitab function Salt llluminates when the special salt has run out 1 g Rinse aid Iluminates when the rinse aid has run out 1 The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and or rinse aid is necessary Control panel 9 The digital display indicates e the level of hardness to which the water softener is set e the approximate remaining time of the running programme e activation deactivati
29. r basket Setting electronically i The dishwasher is factory set at level 5 i 2 Press the On Off button The dishwasher must be in setting mode Press simultaneously and keep pressed buttons B and C until the lights of buttons A B and C start flashing Press button A the lights of buttons B and C turn off while the light of button A goes on flashing In the digital display will show the current level and a sequence of intermittent audible signals are heard Examples S L displayed 5 intermittent audible signals pause etc level 5 IO L displayed 10 intermittent audible signals pause etc level 10 To change the level press button A Each time the button is pressed the level changes for the selection of the new level see the chart Examples if the current level is 5 by pressing button A once level 6 is selected if the current level is 10 by pressing button A once level 1 is selected To memorise the operation switch off the dishwasher by pressing the On Off button Use of dishwasher salt Use of dishwasher salt AN WARNING Only use salt specifically designed for use in dishwashers All other types of salt not specifically designed for use in a dishwasher especially table salt will damage the water softener Only fill with salt just before starting one of the complete washing programmes This will prevent any grains of salt or salty water which may have been spilt remaining on the bo
30. such as whisks leave off one half of the cutlery grid 43N EPEA JUUN agau one wwabeda2279 8 daJtitsjji4 F The cutlery basket can be opened out Always make sure that you put your hand around both parts of the two part handle when removing it from the dishwasher 1 Place the cutlery basket on a table or work surface 2 Open out the two part handle 3 Remove cutlery Load cutlery and dishes EE The upper basket Load smaller fragile crockery and long sharp cutlery in the upper basket e Arrange items of crockery on and under the Hi folding cup racks so that they are offset from each other and water can reach all items The cup racks can be folded up out of the way for tall crockery items Lay or hang wine and brandy glasses in the slots in the cup racks Adjusting the height of the upper basket Maximum height of the dishes in D the upper basket the lower basket With upper basket raised 22 cm 30 cm With upper basket lowered 24 cm 29 cm i The height of the upper basket can also be adjusted when it is loaded Raising lowering the upper basket Use of detergent 1 Pull out the upper basket completely 2 Holding the upper basket by the han dle raise it as far as it will go and then lower it vertically The upper basket will latch into the lower or the upper positio
31. time Dirty filters will degrade the washing result AX WARNING Before cleaning the filters ensure that the machine is switched off 1 Open the door remove the lower basket 2 The dishwasher filter system compri ses a coarse filter A a microfilter B and a flat filter Unlock the filter system using the handle on the mi crofilter and remove the filter system 3 Turn the handle about 1 4 a turn an ticlockwise and remove the filter sys tem 4 Take hold of the coarse filter A by the handle with the hole and remove from the microfilter B 5 Clean all filters thoroughly under run ning water Care and cleaning 6 Remove the flat filter from the base of the washing compartment and clean both faces thoroughly 7 Put the flat filter back in the base of the washing compartment and en sure that it fits perfectly 8 Place the coarse filter A in the mi crofilter B and press together 9 Put the filter combination in place N and lock by turning the handle clock wise to the stop During this process ensure that the flat filter does not protrude above the base of the washing compartment A WARNING NEVER use the dishwasher without filters Incorrect repositioning and fitting of the filters will produce poor washing results and may result in damage to the appliance Cleaning the spray arms i NEVER try to remove the spray arms If residues of soil have
32. ttom of the machine for any period of time which may cause corrosion To fill 1 Do not worry if water overflows from the unit when filling with salt this is quite Open the door remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise Pour 1 litre of water inside the container this is necessary only before filling with salt for the first time Using the funnel provided pour in the salt until the container is full Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket Replace the cap tightly turning it clockwise until it stops with a click normal i The salt indicator light on the control panel can remain illuminated for 2 6 hours after the salt has been replenished assuming the dishwasher remains switched on If you are using salts that take longer to dissolve then this can take longer The function of the machine is not affected Use of rinse aid Use of rinse aid AN WARNING i Only use branded rinse aid for dishwashers Never fill the rinse aid dispenser with any other substances e g dishwasher clean ing agent liquid detergent This would damage the appliance Rinse aid ensures thorough rinsing and spot and streak free drying Rinse aid is automatically added during the last rinse 1 Open the container by pressing the release button A NIL AN
33. yphon back into the machine Electrical connection i The total length of the drain hose including any extension you might add must be no longer than 4 metres The internal diameter of the extension hose must be no smaller than the diameter of the hose provided Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided When connecting the drain hose to an under sink trap spigot the entire plastic membrane A must be removed Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot Our appliances are supplied with a security device to A protect against the return of dirty water back into the aa machine If the spigot of your sink has a no return valve incorporated this can prevent the correct draining of your dishwasher We therefore advise you to remove it To avoid water leakage after installation make sure that the water couplings are tight Electrical connection A WARNING Safety standards require the appliance to be earthed Prior to using the appliance for the first time ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed The fuse rating is also to be found on the rating plate Always plug the mains plug into a correctly installed sho
Download Pdf Manuals
Related Search