Model 70A00-1 GSM Cellular Communications Center
Contents
1. Power Jack Connects the 12V Power Adapter Phone Jack Connects to house telephones or alarm panel PSTN Jack Connects to PSTN telephone line Install the Antenna 1 Screw the antenna onto the antenna base 2 Attach the SMA connector of the base to the C3 Antenna Jack 3 Locate the antenna away from the C3 4 Completely uncoil the antenna cable to avoid interference Warning Do not mount the antenna outdoors Install the Power Adapter Plug the connector from the supplied AC Power Adapter into the C3 Power Jack Plug the AC Power Adapter into a 120VAC outlet Installing or Replacing the Battery If applicable remove the battery compartment door screw located on the battery door tab 2 Open the battery compartment by pressing down on the battery door tab and removing the battery compartment door 3 If applicable remove the battery pack by disconnecting the battery cable from the battery connector 4 Install the battery pack by connecting the battery cable to the connector on the inside of the battery compartment 5 Reinstall the battery compartment door using the screw to secure the battery door tab L Battery Door Tab gt A ifs O 4 SM Card k T Door Tab S E Da BE O a0 su r SIM Card Compartment Battery Operation The C3 unit will2. HOUSE PHONE JACK S a A Backup GSM service with a security system Operation Turn on the unit by moving the Power Switch to the On position When the unit is first switched on the C3 unit searches for a network before calls can be made Power Indicator Signal Strength Indicators In Use Indicator Network Indicator When the unit is turned on the Power Indicator will illuminate and the Network Indicator will flash quickly while the C3 searches for a network When a network is found the Network Indicator will flash slowly and the Signal Strength Indicators will illuminate based on the GSM signal strength If the SIM card is not installed or the SIM card can t be used the Signal Strength Indicators and Network Indicator will flash quickly If a connected phone is taken off hook a busy signal will be heard Note If the SIM care is not installed or can t be used turn the Power Switch to Off so that the landline can be used as normal 9 Making Calls To make a phone call simply pick up a connected telephone and listen for a dial tone Whenever a connected phone is taken off hook the In Use Indicator is illuminated If a PSTN landline is connected you will hear the normal dial tone Simply make your call as normal If the landline is temporarily unavailable the C3 will automatically switch to GSM mode If a PSTN landline is not present or is
3. burns or other injuries High temperatures may also cause deformation of the casing Ensure that there is good ventilation when using the equipment Do not store the equipment in humid or dusty areas Storage in such areas could lead to fire electrical shock or other damage Do not operate beyond its specified temperature humidity or power source ratings Do not use this device in a high temperature or high humidity area 12 Federal Communication Commission Notice This equipment complies with Part 68 of the FCC rules Located on the equipment is a label that contains among other information the ACTA registration number and ringer equivalence number REN If requested this information must be provided to the telephone company The REN is used to determine the quantity of devices which may be connected to the telephone line Excessive REN s on the telephone line may result in the devices not ringing in response to an incoming call In most cases but not all areas the sum of the REN s should not exceed five 5 0 To be certain of the number of devices that may be connected to the line as determined by the total REN s contact the telephone company to determine the maximum REN for the calling area This equipment cannot be used on the telephone company provided coin service Connection to Party Line Service is subject to State Tariffs If this equipment causes harm to the telephone network the telephone company will
4. temporarily unavailable the GSM network will be used You will hear a dial tone with a different cadence from the normal PSTN dial tone When you hear this dial tone you know that the PSTN landline is currently unavailable and you are using the GSM network When connected to a security system and an alarm occurs the call will be made using the GSM network as if using the PSTN landline Making a call using the GSM network 1 Pick up the phone and listen for the GSM dial tone 2 Dial the phone number you wish to call and then press the key on the phone keypad The call will be made immediately Note If you do not press the key after dialing the phone number the call will automatically be made several seconds after the last digit was entered When a landline is present If you would like to make a phone call using the GSM network even when a PSTN landline is available you may do so as follows 1 Pick up the phone and listen for the normal dial tone 2 Press the key on the phone keypad 3 You will immediately hear the GSM dial tone 4 Dial the phone number you wish to call as described above 10 Receiving Calls When a call is made to either the landline phone number or the cellular number assigned to the SIM card the connected phones will ring as normal Simply pick up a handset to answer the call Ending Calls While on a call using either the landline or the GSM network to disconnect the call simp
5. HAI Home Automation Inc Model 70A00 1 GSM Cellular Communications Center Operation Manual Document Number 70100 1 Rev A August 2009 Contents D scriptio N aisaen an eiaa aaia ekaa uaa aeni naaa ENa Niika Use with security Systems cccceceecceeeeeeeeeeeeeeeeeeeeeseeeeeeeeeeeeeeae Everyday uSE 000 Contents of Box CUE ee Install the Power Adapter cccccceseeceeeeeeeeeteneeeeeeeeeeeneeeeeee Installing or Replacing the Battery Battery Operation 05 z Installing the SIM Card ececcecceeeeeeeeeeeeeeeeeeeeeeeteneeeeseeeeeeeeeeeeae Connecting Telephones ccceccceeeseeeeeeeeeeeeneeeeeeeeeseneeeeeeaeeess Connecting a PSTN Landline cceeceeeceeeeeeeeeeeeeeeeeeeeeeeeeeees Qperatlons ii secs AT ET T E Making Calls are Making a call using the GSM network 10 When a landline is present c cccceeeeeeceeeeeeeeesesteeeeeeees 10 Receiving Calls feed Ending GallSwi 4 24 00 cnta aerate aie Maa a Aloette Troubleshooting ececeeeeeceeeeeeeeeeeeeeeeeeeeeeeeeeneeeeeeeeeees 11 Specifications siisc cessive ci cedede cect eveeietied ard bk incense hashed 12 Preventing Malfunction 2 cccccseesseeeeeeeeeeeeeseeeeeeees 12 Federal Communication Commission Notice 13 FCC Caution sosea ikiden ani iiaa ahs FCC Radiation Exposure Statement ccceeeeeeeeeeteeeeee
6. automatically switch from AC to battery power upon loss of AC power Whenever AC power is present the rechargeable battery pack is being charged The rechargeable NI MH 7 2V 1300mAh battery pack will provide 3 hours continuous talk time and 14 hours stand by operation 5 Installing the SIM Card Caution The C3 must be switched off before installing or removing the SIM card Do not install or remove the SIM card when the power is on otherwise the SIM card may be damaged The GSM network cannot be used if the SIM card is damaged 1 If applicable remove the SIM card compartment door screw located on the SIM card door tab Open the SIM card compartment by pressing down on the SIM card door tab and removing the SIM card compartment door Open the SIM card holder by sliding the holder to the right and then lifting up the holder Slide the SIM card into the SIM card holder making sure that the notched corner of the SIM card lines up with the notched corner on the SIM card holder Gently lower the SIM card holder and lock it in the closed position by sliding the holder to the left Le Reinstall the SIM card compartment door using the screw to secure the SIM card door tab Connecting Telephones Connect analog telephone s to the modular jack labeled PHONE on the C3 unit If a PSTN landline isn t present the GSM network ca
7. es 15 Important Safety Instructions Or CO Nas gt 11 Read all safety and operating instructions before using This product should not be used near water Only use dry cloth to clean this product Do not block any ventilation openings Do not install this product near any heat sources such as radiators heat registers stoves or other appliances including heat producing amplifiers that produce heat Only use attachments specified by the manufacturer Unplug this apparatus during lightning storms Care should be taken so that objects do not fall and liquids are not spilled into the unit through the ventilation ports or any other openings Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as a liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture the apparatus does not operate normally or has been physically damaged WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture WARNING Battery may explode if mistreated Do not disassemble or dispose of in fire Description The C3 Cellular Communications Center is a wireless cellular communicator that allows phone calls to be made over the GSM cellular network using the existing telephones in your home The C3 can be used when there is no landline in your home or the
8. hat point you will hear the cellular mode tone and you can make the call using the GSM cellular network When a call is made to the phone number assigned to the GSM SIM card that is installed in the C3 any phones that are connected to the C3 will ring as they normally would when a landline call is received PRIMARY CELLULAR SERVICE No landline service required Central Monitoring Station HAI Cellular Communi Station r E HAI Home Automation a Controller uv Home Telephones Landline Phone Mobile Phone BI Used as Primary phone service no landline 2 Contents of Box GSM Antenna e ih Telephone Cable Operation Manual Backup Battery Pack C3 Cellular Communications Center SIM Card A GSM Global System for Mobile communications SIM card Subscriber Identity Module is required for operation The SIM card contains subscriber information about your cellular service including the telephone number Typically an additional line can be added to a GSM cellular plan by your provider for a nominal monthly fee You can use the SIM card from the additional line in the C3 unit Another option is to use a prepaid SIM card Prepaid SIM cards can be used in the C3 as long as the SIM card isn t locked to a handset Installation Ce PSTN Jack ower Switch Phone Jack Antenna Jack Power Jack Antenna Jack SMA Connects the supplied antenna Power Switch Turns the unit On or Off
9. he following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation 14 IMPORTANT NOTE FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 50cm between the radiator and your body This transmitter must not be co located or operating in conjunction with any other antenna or transmitter Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the eq
10. landline is temporarily unavailable Use with security systems The C3 allows any existing security panel to communicate alarm conditions using the GSM cellular network The C3 checks the status of the existing PSTN telephone line and if it is unavailable the C3 will emulate the line signal to the security panel When an alarm occurs the security panel will dial out using the GSM cellular network to communicate with the central monitoring station BACKUP CELLULAR SERVICE Use landline or cellular service Automatically switches to cellular when landline is down Central Monitoring Station HAI Cellular A Communication Station LINE DOWN ke fe Home a utomation ETA Controller HA 3 Home Telephones Landline Phone Mobile Phone LI Used as Backup phone service landline unavailable Everyday use When the C3 is connected to the GSM cellular network attached telephones can be used to make calls If a landline is present you will hear the normal dial tone and you can make your call as normal using the landline service However if the landline is currently unavailable you will hear a different tone which indicates the C3 is in cellular mode and the call will be made using the cellular network If the landline is available but you still want to make the call using the cellular network when you pick up the phone and hear the normal dial tone press the key on the phone and the C3 will switch to GSM mode At t
11. ly hang up the handset Troubleshooting Symptom Problem Always hear busy SIM card in not installed or the SIM card signal when the is not making a proper connection with phone is off hook the contacts on the SIM card holder Can not connect Reorient the antenna with GSM network Signal too weak at location Signal Strength Reorient the antenna Indication is weak Antenna is connected improperly No dial tone Telephone line is improperly connected Noise during calls Signal too weak Unit unexpectedly Unit needs to be rebooted Switch off the shut down power and wait a moment then restart it Echo during calls Change antenna location Network problem Please consult with network operator 11 Specifications Operating Temperature 10 C 40 C Noise not to exceed 60dB A Humidity 5 95 relative humidity non condensing Atmosphere Pressure 86 106KPa Input Voltage 100 240VAC Operating Power DC 12V 1500mA Frequency GSM GPRS 850 900 1800 1900MHz Power Output Class 4 2W 850 900MHz Class 2 1W 1800 1900MHz Channel Interval 200 KHz Receive Sensitivity 100dBm Frequency Error lt 0 1ppm Dimensions 8 625 x 5 5 x 1 5 Preventing Malfunction Avoid using placing or storing the equipment in places subject to strong sunlight or high temperatures Exposure to intense sunlight and heat may cause the battery to leak overheat or explode resulting in fire
12. n be used as the primary telephone service O oa H In q RJ11 g HoUsE j i PHONE 4 tJ JACK S Ff TO ALL HOUSE TELEPHONES Primary GSM service without a security system TO SECURITY PANEL GREEN H GREEN a g H q RJ11 5 HOUSE 4 HS PHONE JACK S i a Primary GSM service with a security system 7 Connecting a PSTN Landline Connect the incoming PSTN landline to the modular jack labeled PSTN on the C3 unit If a PSTN landline is present the GSM network is used to backup the PSTN telephone service If the landline service is unavailable the GSM network will be used TELEPHONE NETWORK INTERFACE axe cj aan 1 Recest mem mens Fane FS j T founce rreson H H z J VW NL SURGE ARRESTOR p RJ11 n i MUST BE GROUNDED q HOUSE ue PHONE TO TELCO 7 JACK S INTERFACE AT SURGE ARRESTOR TO ALL HOUSE TELEPHONES Backup GSM service without a security system TO SECURITY PANEL GREEN RED reLePHONE NETWORK INTERFACE RED z sgg GREEN N SURGE ARRESTOR MUST BE GROUNDED RJ11
13. notify you in advance that temporary discontinuance of service may be required If advance notice isn t practical the telephone company will notify the customer as soon as possible Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary The telephone company may make changes in its facilities equipment operations or procedures that could affect the operation of the equipment If this happens the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service 13 If trouble is experienced with this equipment please contact Home Automation Inc 4330 Michoud Blvd New Orleans LA 70129 USA Phone 504 736 9810 Fax 504 253 2957 If trouble is causing harm to the telephone network the telephone company may request you to remove the equipment from the network until the problem is resolved This equipment uses the following USOC jacks RJ11C It is recommended that the customer install an AC surge arrester in the AC outlet to which this device is connected This is to avoid damaging the equipment caused by local lightening strikes and other electrical surges FCC Caution Any Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment This device complies with part 15 of the FCC Rules Operation is subject to t
14. uipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help 15
Download Pdf Manuals
Related Search