USBPP52 Instruction Manual
Contents
1. this product must not be disposed of with normal domestic waste To prevent C This product conforms to all applicable EU legislation for this type of product Further information can be obtained from Ross if required 2 0 In the Box Please open your box carefully and check the contents which 3 0 Product Specifications should be as the list below If anything is missing please contact Please find the detailed specifications for the Ross Power Pack below the Ross helpline or return the product to the point of purchase e Real Capacity 5200mAh Ross Power Pack Input 5V 1A USB to Micro USB cable 15cm or 6 inches e Output 5V 1A e Battery Lithium Polymer Battery e Weight 115g e Dimensions L W H 90 44 23mm e Charging Time 6 Hours e Static Power Consumption lt 20uA e Cycle Life gt 500 Times User manual 4 0 Product Features Please find details of the Ross Power Pack below e An excellent choice for instant portable power simply connect your portable device via the USB socket amp press the button for instant charging e Light weight compact and robust design e Long service life more than 500 charging discharging e LED Power indicator to show the charge status e Includes 6 15cm Micro USB to USB charge cable e The use of advanced intelligent protection chip overcharge discharge short circuit and leakage protection e Built in LED flash light 5 0 Product Instructions The product will require charging upo2. 1 1 Important Safety Instructions USBPP52 Power Pack 52000 WHITE Model Number USBPP52 RO User Manual Please read this manual thoroughly before using your Ross Power Pack and then retain for future reference Please read these instructions carefully and retain for future reference If you sell or give this Power Pack away be sure to pass on the instructions There are no user serviceable parts inside this unit DO NOT open there are dangerous voltages inside Electric shock hazard This unit operates on a 5200mAh capacity During use this device may become warm this is normal DO NOT place naked flames such as candles on this equipment DO NOT operate close to heaters or other heat sources DO NOT stand on soft furnishings DO NOT operate this unit in damp conditions or allow water or other fluids to enter the enclosure If this happens switch off IMMEDIATELY and refer the device to the Ross helpline DO NOT clean this device using solvent based products Use only a soft dry cloth DO NOT leave this product in a hot or humid environment 1 2 General Information Thank you for choosing the Ross Power Pack 52000 White Treated with care and used in accordance with the contents of this manual it will provide many years of reliable service possible harm to the environment or human health from uncontrolled waste disposal please recycle it responsibly X This symbol indicates that at the end of its useful life
3. n purchase The cable provided will charge the power bank with power and depending on the connector type of your device Cable is Micro USB you can also use the cable to charge your device 5 1 Product Details 4 level indicator light 2 2 Power Indicator Light button Torch on off if pressed twice LED Flashlight 4 USB 1 0A output interface Micro USB input interface 5 2 Charging the Power Bank Using the provided cable connect the Micro USB via the Micro USB input interface 5 connect the USB end of the cable to an appropriate charging port Examples include a USB plug or a USB input interface on a laptop The orange LED indicator lights will start to flash Charging should take approx 6 hours however when fully charged the LED indicator lights with all be continuously on Once fully charged disconnect the cables 5 3 Charging a device To charge a device with a Micro USB connector use the cable provided Place the USB end into 4 USB 1 0A output Interface then plug the Micro USB into your device Press the power indicator light The charge icon on your device should now indicate your device is charging To charge a device with another connector type other than Micro USB iPhone for example use the cable provided with the device as long as it has a USB Place the USB end of the cable into 4 USB 1 0A output interface then place the connector on the other end into your device Press the power indicator light The cha
4. rge icon on your device should now indicate your device is charging Your device will charge in various speeds depending on the voltage of the device for larger devices which require larger outputs the Power Pack 5200 will offer an extension to the life of the battery charge may not fully re charge the device To start charging the device click the on off button once for the torch click the on off button twice 5 4 LED Indicators The LED lights are a direct indication of how much charge is in the device You can check this at any time by pressing the power indicator button 4 LED Lights 75 100 Power Capacity 3 LED Lights 50 75 Power Capacity 2 LED Lights 25 50 Power Capacity 1 LED light 0 25 Power Capacity 6 0 Additional Notes amp Tips e The product can become warm when in use this is normal e For first time charge the product may need 8 10 hours to become fully charged e The product will lose charge if left for a long period of time without use e Please ensure you keep the USB ports on the device clean if they require cleaning use a dry cloth e To operate the torch press the power button twice SG Xe Technical Support UK 0845 194 7584 Email help ross co uk
Download Pdf Manuals
Related Search