LockerLock Schließgehäuse LockerLock lock case Boîtier de
Contents
1. engl AS dialock Mounting instructions Keep the push button pressed When the red LED flashes present the red deletion key stick to the push button The green LED lights up as confirmation Remove the red deletion key stick Release the push button LockerLock switches off automatically If an error occurred during the assigning process gt Switch on LockerLock again gt Assign the programming and deletion key sticks again If the error occurs again gt Contact your Dialock dealer engl 33 AS dialock Mounting instructions Brief User Manual Assigning locking authorisations via programming key stick set choice of lockers 1 34 Press the push button and keep it pressed The red LED lights up LockerLock is switched on Keep the push button pressed Present the green programming key stick to the push button The green LED flashes When the green LED flashes approx 5 seconds release the push button and present to the push button the electronic key to be learnt The red LED flashes shortly to confirm the successful learning The green LED remains illuminated without flashing The locking authorisation has been assigned to the electronic key to be learnt Remove the learnt electronic key The green LED flashes LockerLock switches off automatically after approx 5 seconds If the red LED lights up the procedure has not been successful gt Repeat assigning the locking authorisa2. mounting on heavy duty wooden and HPL High Pressure Laminate door panels or doors which are frequently used 4 countersunk screws M5 x 25 mm 4 screw in sleeves or glue in sleeves M5 Wood drill D 22 mm Wood drill D 8 mm or D 10 mm according to sleeves used For mounting on steel door panels 4 countersunk screws M5 x 25 mm Steel drill D 22 mm engl 25 26 AS ilock Mounting instructions Customising LockerLock for doors hinged on left side LockerLock is delivered for doors hinged on the right side For door panels which are hinged on the left side the arrangement of lock casing and latch assembly must be customised Y Q o Ly dy n En ge gt Hig Removing lock casing and latch assembly 1 Remove the latch assembly from the LockerLock casing 2 Remove the lock casing from the LockerLock casing T 4 A Mee Mounting lock casing and latch assembly for door panel hinged on left side 3 Turn the lock casing and mount it into the LockerLock casing The locking latch points the other way 4 Mount the latch assembly on the other side of the LockerLock casing engl AS dialock HAFELE Mounting instructions Mounting LockerLock Three steps are
3. required to mount LockerLock e Drilling a hole for the push button into the door panel e Drilling holes for the screws into the door panel e Fixing LockerLock to the door panel Mounting on wooden and HPL High Pressure Laminate doors is described below The drawings refer to doors hinged on the right side A Condensation water precipitating on cold components can damage the door locking system Make sure all components have ambient temperature Drilling a hole for the push button into the door panel o ee a 9 82 o e 1 Mark the centre point of the push button hole on the door panel Drilling templates are provided with this manual 2 Make sure the centre points of the striking plate and the push button hole are at the same height of the door panel engl 27 AS dialock HAFELE Mounting instructions 3 Consider the distance of the push button hole to the door panel edge according to the door panel type inset or overlay 4 Drill a hole for the push button into the door panel with D 22 mm using an appropriate drill bit Drilling holes for the screws into the door panel 1 Mark to size 4 points for the screw holes on the door panel Drilling templates are provided with this manual Remove the cover of the battery hold with the maintenance tool Hold LockerLock to the inside of the door panel in such a way that the push button projects through the respective hole Check that t
4. to the push button The green and red LED light up shortly after each other The locking authorisations have been deleted from all electronic keys 4 Individually assign locking authorisations to those electronic keys again which are to keep authorisations engl 35 AS dialock HAFELE Mounting instructions Operation with wellness function gt Before LockerLock with wellness function can be operated carry out one locking procedure with an authorized personnel key Locking the door 1 Close the door 2 Press the LockerLock push button with an authorised electronic key to the stop and keep it pressed for approx 1 second Remove the electronic key The push button remains pushed in The locking latch is extended the door is locked Unlocking the door Press the push button with an authorised electronic key to the stop and keep it pressed for approx 1 second Remove the electronic key The push button projects The locking latch is pulled in you can open the door Isec 1sec POS E la y LockerLock operating instructions 36 engl AS dialock HAFELE Mounting instructions Changing batteries If the batteries are low the red and green LED flash alternately after the LockerLock is switched on The door cannot be locked any more with LockerLock if the batteries are empty Trouble free operation of the LockerLock can only be ensured if low batteries are changed i
5. Montageanleitung A Mounting instructions ER Instructions de montage d k Istruzioni di montaggio I d 0 C Instrucciones de instalaci n HAFELE LockerLock SchlieBgeh use LockerLock lock case Boitier de fermeture LockerLock Scatola di ciusura LockerLock Caja de cierre LockerLock AS dialock HAFELE Mounting instructions Caution lt is necessary to read the section Commissioning in this manual before the actual commissioning assigning of keys takes place Areas of application The LockerLock furniture lock is used for all common cabinet types e g wardrobes hall cupboards and lockers LockerLock is mounted at the inside of the door panel An electronic circuit controlling the locking mechanism is built into the LockerLock casing The locking mechanism is battery powered it is operated by the electronic keys In order to lock and unlock the door the LockerLock push button at the front side of the door panel must be pushed with an authorised electronic key Technical Information Within the Basic Solution LockerLock is delivered in Stand Alone mode In this mode locking authorisations can be assigned to up to 30 electronic keys with a special programming key stick directly at the LockerLock The locking authorisations are also withdrawn from authorised electronic keys with a deletion key stick directly at the LockerLock Furthermore by means of the info terminal the Wellness function can be added to t
6. he LockerLock via a configuration transponder Please contact your Dialock dealer if you want to employ another mode of operation Components necessary for commissioning e LockerLock e Programming key stick and deletion key stick e Electronic key e 4 batteries AA 1 5 Volts type E91 20 engl 0 dialock HAFELE Mounting instructions Standards and regulations LockerLock complies with the following standard regulation on which the test approval were based e EN 300 330 May 1999 frequency spectrum Specifications Temperature range 0 70 C Storing temperature 20 85 C Relative humidity 10 90 non condensing Safety class IP 44 engl 21 AS GEES dialock HAFELE Mounting instructions Supplied with 1 gt 2 D 3 oll 4 5 LockerLock casing 1 piece 1 Fixing holes 2 Window with LED and IR display 3 LockerLock casing 4 Battery hold 5 Battery hold cover 6 Locking latch 7 Lock casing 8 Push button 9 Latch assembly Accessories 10 Cover plugs 2 pieces LockerLock can be used with doors hinged on the right or left side LockerLock is delivered for doors hinged on the right side 22 engl AS dialock HAFELE Mounting instructions Accessories not included in standard set Electronic key Striking plate Batteries 4 recommended AA 1 5 Volts type E91 Operating in
7. he points for the screw holes on the door panel correspond to the fixing holes in LockerLock 28 engl AS dialock Mounting instructions Remove LockerLock from the door panel Drill holes for 4 screws into the door panel using an appropriate drill bit If you use sleeves consider the respective diameter when drilling holes Fixing LockerLock to the door panel 1 Hold LockerLock to the inside of the door panel in such a way that the push button projects through the respective hole 2 Tighten the screws in the door panel with the screwdriver through the fixing holes 8 Push cover plugs into the fixing holes in order to hide the screws engl 29 AS dialock HAFELE Mounting instructions 4 Insert 4 batteries AA 1 5 Volts type E91 recommended into the battery hold Make sure the polarity is correct 5 Push the cover onto the battery hold 6 Stick the number plate with number or blank and the instructions for use onto the outside of the door panel parallel to the door edge as shown Gluing aids are provided with this manual Make sure the surface of the door panel is dry clean and non greasy 30 engl AS dialock HAFELE Mounting instructions Demontage Required tools e Cordless screwdriver e Drill D 3 mm e Wood screws ABC Spax 5 x 25 mm e Screwdriver Dismounting LockerLock from the door panel Remove the cover of the battery hold with the maintenance to
8. mmediately We recommend to change the batteries after 2 years of use in order to avoid possible damage through leaking batteries Recommendation Energizer alkaline manganese batteries NY Do not dispose of batteries through normal domestic waste 2 gt Batteries should be disposed of in an environmentally friendly way e g at municipal collection points Changing batteries 1 Place the maintenance tool on the cover of the battery hold 2 Press the maintenance tool push it up slightly then together with the battery hold cover pull it down and away engl 37 gt dialock o HAFELE Mounting instructions Remove the empty batteries from the battery hold Insert new batteries into the battery hold Make sure the polarity is correct 5 Remove the battery hold cover from the maintenance tool and push itonto the battery hold from below The battery hold is closed After the batteries have been changed LockerLock is ready for use again 38 engl
9. ol 2 Drill a hole into the cover plugs with the cordless screwdriver and drill bit 3 Remove the screws from the door panel with the screw driver through the fixing holes The cover plugs are removed with the screws 4 Remove LockerLock from the door panel engl 31 AS dialock HAFELE Mounting instructions Setting into Operation Assigning programming and deletion key sticks Stand Alone Within the Basic Solution set choice of lockers the programming and deletion key sticks must be assigned at the open door during commissioning The Wellness function free choice of lockers must be added with the configuration transponder before programming and deletion key sticks are assigned Prevent misuse of electronic keys by unauthorised persons Store the programming and deletion key sticks in a safe place since they can be used for assigning locking authorisations to electronic keys e 1 Have the green programming key stick and red deletion key stick ready 2 Press the push button and keep it pressed The green LED in the window of the LockerLock casing flashes for several seconds LockerLock is switched on 3 Keep the push button pressed When the green LED flashes present the green programming key stick to the push button The LED lights up green without flashing 4 Remove the green programming key stick keep the push button pressed The red LED flashes to confirm the successful learning 32
10. structions 1 piece Number plate with number or blank 1 piece Maintenance tool for LockerLock Mounting material Screws 4 pieces according to mounting type Screw in glue in sleeves 4 pieces o w G N Z N The article numbers can be found in the Technical Information Dialock engl 23 AS dialock HAFELE Mounting instructions Installation Preconditions e Panel thickness 13 19 mm e Recommended door width Standard value for inset doors min 305 mm Standard value for overlay doors min 140 mm e Mounted striking plate or striking angle e Distance between push button centre and door panel edge for inset doors 32 mm for overlay doors 34 U mm U projection of door We generally recommend a trial installation before series manufacturing in order to check the dimensions p o 34 12 O22 al un Horizontal projection with overlay door panel U Projection of door 24 engl AS dialock Mounting instructions 35 i as Horizontal projection with overlay door panel with striking angle Required tools and mounting material e Drilling template gluing aid Drill Screwdriver Ruler Awl For mounting on wooden and HPL High Pressure Laminate door panels 4 wood screws ABC Spax 5 x 25 mm Wood drill D 22 mm Drill for wood screws ABC Spax 5 x 25 mm For
11. tion When the green LED flashes present the next electronic key to be learnt to the push button within 5 seconds repeat steps 3 and 4 After all electronic keys have been learnt successfully Wait until LockerLock switches off automatically All locking authorisations have been assigned engl AS dialock HAFELE Mounting instructions Withdrawing locking authorisations from single electronic key with deletion key stick set choice of lockers 1 Press the push button and keep it pressed The red LED lights up LockerLock is switched on 2 Keep the push button pressed Present the red deletion key stick to the push button The red LED flashes 3 Release the push button and present the electronic key to be deleted to the push button The red LED switches off The locking authorisations have been deleted from the presented electronic key Withdrawing locking authorisations from all electronic keys set choice of lockers If an electronic key is lost and therefore shall not be authorised any longer all electronic keys must be deleted at the LockerLock After this locking authorisations must be assigned to all authorised electronic keys again 1 Press the push button and keep it pressed The red LED lights up LockerLock is switched on 2 Keep the push button pressed Present the red deletion key stick to the push button The red LED flashes 3 Release the push button and present the green programming key stick
Download Pdf Manuals
Related Search