Instructions
Contents
1. ikelite 5516 15 MIL Dome Port with Zoom Instruction Manual The 5516 15 MIL Dome Port Dome Port with Zoom with Zoom is an optical grade 6 inch diameter acrylic dome A Zoom Sleeve not included is MA N required to operate the Dome Port Zoom Control Dome Port is only compatible with Ikelite MIL housings See the MIL Port System section mM at www ikelite com to view lens and zoom sleeve compatibility Thank you for your purchase of Ikelite equipment Please read this instruction manual completely before attempting to operate or dive with this product Please refer to the back page of this manual to register your Ikelite product What s in the Box Dome Port Neoprene Cover Spare Thumb Screws Spare o ring Silicone Lubricant 1cc Tube Installing the Dome Port 1 First check to see that there is a thin film of lubricant on the Port Base O ring The o ring should appear slick If necessary relubricate with the supplied Ikelite lubricant Do not use excessive lubricant which can attract hair or other debris Use ONLY Ikelite lubricant Make sure the o ring is free of hair or other debris once lubricated Install the gear sleeve inside the Port Base with the teeth facing up and away from the housing Slide the Dome Port evenly over the Port Base until it STOPS Diagram A Page 3 When properly installed there should only be an approximate 5 32 inch or less gap between the bot2. ise so at least 3 to 4 threads are showing remove Port If the Port seems stuck loosen the three Thumb Screws another turn or two until the Port can be removed 2 REMOVE and store the gear sleeve until it is needed Diagram C S Thumb Screw J 1 I 7 T il gt Remove Gear Sleeve Spare Parts Can be ordered through any Ikelite dealer or by calling Ikelite customer service 0184 2 Silicone lubricant 2cc resealable tube 0203 89 Thumb Screw Customer Support Ikelite Underwater Systems Service Department 50 West 33rd St Indianapolis IN 46208 USA Email ikelite ikelite com Phone 317 923 4523 Limited Warranty This Ikelite product is warranted against any manufacturing defects for a period of one 1 year from the original date of purchase Defective products should be returned to Ikelite postage paid Ikelite will at its sole discretion repair or replace such products and will return to customer postage paid All other claims of any nature are not covered Except as mentioned above no other warranty expressed or implied applies to this Ikelite product Returning Products For Service Ikelite is most interested in performing any service to ensure that all products perform as intended Evidence of purchase date must be provided to obtain warranty service No prior au
3. thorization is required You may return directly to us or through your dealer Please include a brief description of the problem any relevant email correspondence and or instructions on what you want us to do Always include name shipping address email address and phone number inside of the package Send postage paid to Ikelite Underwater Systems Attention Service Department 50 West 33 Street Indianapolis IN 46208 USA No reimbursements for postage paid will be issued You may also want to insure the package Returning Products for Service outside the United States For the separate international customs documentation form that you complete to accompany the shipment please state or designate that the enclosed products were originally manufactured in the USA and are being returned to the manufacturer for repair service Value of the equipment listed for customs purposes should be zero Product Registration Please go to www ikelite com to register your Ikelite housing within 15 days of purchase Ikelite Underwater Systems 50 West 33rd Street Indianapolis IN 46208 USA www ikelite com 2014 Ikelite Underwater Systems 5516 15_MIL_Dome Port_Zoom_01 1214
4. tom of the Port and the front of the housing Diagram B Page 4 Snugly tighten the three thumb screws into the Port Base DO NOT overtighten No Thumb Screw threads will be visible once the Port is properly secured Check Zoom Control operation The gear sleeve must be installed BEFORE attaching the Dome Port We recommend placing the closed housing in a pool or bathtub to assure proper installation and watertightness before installing your camera Installing the Dome Port continued Diagram A Dome Port Zoom Control Thumb Screw Mili Ti a f Y y Port Base O ring should be lightly lubricated use Ikelite lubricant only Installing the Dome Port continued Diagram B Zoom Control o lt Loosen Tighten gt 1 Dy Thumb Screws Approximately 5 32 inch or less gap will be present between the Housing Front and bottom of Port when the Dome Port is properly installed Removing the Dome Port caution DO NOT leave the Port off the Port Base for extended periods of time This can result in debris being attracted to the Port Base O ring resulting in a bad seal We recommend leaving the Port installed on the housing at all times unless switching to a different Port 1 To remove turn each Thumb Screw counterclockw
Download Pdf Manuals
Related Search
Instructions instructions synonym instructions not included movie instructions for 1040 2024 instructions for form 8962 instructions brp instructions meaning instructions in spanish translation instructions for 1040 instructions unclear meme instructions for schedule c instructions for form ss-4 instructions for form 941 instructions for form 720 instructions for 1040 2023 instructions for form 8949 instructions for box 12 on w2 instructions for form 1040 instructions for submitting certain i-589 instructions synonyme instructions to candidates