DS-6102HL Portable Video Recorder
Contents
1. A 3 0 MONDAY a OCTOBER 14 2013 Searching for GPS USB connected to y tiles to from platform register latforn USB debugging connected 3 Click the item to enter the USB Mass Storage Settings interface 5 USB mass storage USB connected You ve connected to your computer via USB Touch the button below if you want to copy files between your computer and your Android s SD card Turn on USB storage 4 Click Turn on USB storage on the screen Then the color of android turns from green to yellow and the message USB storage in use appears indicating that the PVR is successfully connected to the computer via USB interface 6 p ee ye 5 USB mass storage USB storage in use Before turning off USB storage unmount eject your Android s SD card from your computer Turn off USB storage 5 After connected successfully the PVR works as a storage device Enter My Computer gt Removable Disk on the computer and you can view and operate the files stored on the PVR E nore When the external micro SD card is mounted to the PVR two removable disks will be displayed on the computer To exit from the storage mode of PVR eject the device from the computer and then click Turn off USB storage on the screen 4 Record and Capture The internal and external cameras can both record video files and capture pictures For the internal camera you can switch it to the capture or r2. HIKVISION DS 6102HL Portable Video Recorder User Manual V3 1 UD 6LO204D1029A01 Thank you for purchasing our product If there is any question or request please do not hesitate to contact dealer This manual is applicable to DS 6102HL Portable Video Recorder V3 1 This manual may contain several technically incorrect places or printing errors and the content is subject to change without notice The updates will be added into the new version of this manual We will readily improve or update the products or procedures described in the manual Safety Instruction Read keep and follow these instructions Make sure that all the related equipment is power off during the installation Do not place the product in high temperature or damp environment and do not expose it to high electromagnetic radiation If the product does not function properly please contact your dealer or the nearest service center Do not disassemble the product for repair or maintenance by yourself Only use the battery power adapter and assembly parts specified by the manufacturer Consult the authorized dealer or technician from Hikvision for any question and request for product using Table of Contents AS TION AA e O PO CP OE OO A o etwas 2 TARIE OFE ONTENTS aE E E AA E E E T EA 2 E MiroductiOmMennenan ann AS 4 LE A E E 4 Mee Mae RUNCORN as A 4 Lo Produc A A A teste veateiaton 5 LA CONVENTIONS aa nern TETKE AE EAA TESIR EATE EE AS OOR
3. J5MP 2592 1944 Click the Capture icon a to capture the picture You can enable disable the flashlight according to the external circumstances to increase the clarity of captured picture Note You can also capture pictures and set the capture parameters on the recording interface Click the Video Picture icon in the lower left corner of the screen to view the captured pictures For details see Section 7 2 Picture Files Management 5 Audio Recording Purpose You can also record the audio files separately if needed Step 1 Click the recorder application icon on the Home Page to enter the Recorder interface Recorder Click to start recording 00 00 00 2 Click the icon yo to start the audio recording The icon turns to LA The audio file name and audio recording time are displayed on the screen You can also view the real time sound intensity from the pointer position on the index dial Recorder Recording 00 00 08 oA 3 Click the icon ML during the audio recording and a message box pops up Click OK and you can stop the current audio recording click Cancel and you can continue the audio recording The audio recording does not pause during this period Click OK to stop recording click Cancel to continue recording OK Cancel Click the icon fa in the upper right corner of the screen to view the recorded audio files For details see Section 7 3 Audio Files Management 6 Two way
4. Logout Log out the system and you can log into the system with another user account SRA 121 User management admin Common user management PERSONAL SETTINGS Login mode 1 Use password to login enable Login mode 2 Use fingerprint to login disable Modify password Fingerprint management Password lock Use password to unlock 12 1 3 Fingerprint Management Click the Fingerprint management item to enter the Fingerprint Management interface So yw 1 4 Fingerprint management To ensure the effectiveness of fingerprint information it is recommended to register at least one fingerprint max 10 and the fingerprint needs to be swiped three times Please Fingerprint registration Manage fingerprint database delete the entire fingerprint database or a single piece of fingerprint information Fingerprint management Register the Fingerprint The fingerprint login and management are only available for the administrator account You should register the fingerprint in the system before using the fingerprint login function Up to 10 pieces of fingerprint information can be registered Steps 1 Click the Fingerprint registration button to open the Fingerprint Registration page Select a finger Cancel Select the finger to be registered and then swipe the finger you select on the sensor at least 3 times The fingerprint is registered successfully when the yellow process bar is complet
5. Central platform software provides functionalities of live view two way audio data storage device positioning etc 16G internal storage space is available and up to 32G external SD card can be installed Different permissions can be assigned to the users The monitoring host provides the LED monitor and buttons supporting the touch operations Three proofing technology water proofing dust proofing shock resistance Lithium battery supporting at least 4 hours continuous work SDK of smart operation system can be provided for custom development 1 4 Conventions The DS 6102HL Portable Video Recorder will be briefed as PVR or device 2 System Start up 2 1 Package Contents Unpack and check the package contents carefully The following assembly parts are supplied Oo Portable Video Recorder 1 O Battery 1 7 4V 2100mAh O Charger 1 AC Input 100 240V 50 60Hz 0 8A DC Output 12V 2A O DVD CD with user manual supplied 1 18 E Bottom 2 2 Panel Description 15 16 Left side Front Rear Right side 17 1 3 2 4 5 Table 2 1 Panel Description Name Function Description Mem Show the hidden menu on the screen Return to the Home Page Long press it to enable disable the recording Swipe the finger across the fingerprint area for fingerprint registration N Return to the previous menu Headset interface Use for the headset Micro HDMI port HDMI video output connector Use for the group intercom I
6. USB connection status Bluetooth status Wi Fi status and battery status Date amp Time The current date and time of the system are displayed Menu Item The application icons are displayed in the Menu Item area including Camera Recorder File Settings etc 08 4 a 1 4 2013 Friday Dialing Bluetooth Menu Item Camera Recorder 3 4 Notification Center Swipe down from the top of the screen to view the Notification Center Quick Start Icons 5 application icons are displayed in the Notification Center Bluetooth GPS Wi Fi 3G SIM Card and platform Click the icon to enable disable the corresponding functionality The icons are color coded with blue white light blue to indicate that the applications are on off in process of opening or closing Detailed Information The detailed information of the applications including USB connection status platform registration status GPS status etc will be displayed in a list under the quick start icons AAA MONDAY OCTOBER 14 2013 Searching for GPS g rg platform register latfor ive ret 3 5 Connecting PVR to Computer Purpose Connect PVR to a computer using the USB cable and then you can copy files from PVR to the computer or copy files from the computer to PVR Steps 1 Start the PVR and then connect it to the computer using a USB cable 2 Enter the Notification Center and the message USB connected will be displayed on the list
7. address 192 6 22 100 3 Click the Search network item and then the Wi Fi networks available will be searched and displayed on a list automatically You can view the signal strength connection status security mode and other information of the networks oN y gt Wi Fi FAST WPS available OpenWrtXXcTP 841 support Secured with WPA2 TP LINK_IVMS 7200 Secured with WPA WPA2 WPS available davinci chenhaoyf Secured with WPA WPA Va WPS PUSH BUTTON ADD NETWORK 4 Youcan also click ADD NETWORK to add the access point manually 1 Input the network SSID and then select the security mode 2 Optionally you can check the checkbox of Show advanced options and then input to configure the information including proxy settings IP address gateway etc 3 Click Save to save the settings The new access point will be displayed on the Wi Fi networks list Network SSID Security None Show advanced options Proxy settings None IP settings DHCP Cancel Select the access point on the list input the password and then click the Connect button to connect the device to the Wi Fi networks You can also check the checkbox of Show password to display the password in plaintext or check the checkbox of Show advanced options to configure the proxy settings or IP settings Signal strength Fair Security WPA WPA2 PSK Password Show password Show advanced options Connect Cancel Click the
8. and manage its own files 7 1 Video Files Management Click the Video tab on the File Management interface and then click the folder to enter the Video File Management interface You can view and delete the video files IMAGE r Upload reserved Upload the video files to the platform E Thumbnail View View the video files in thumbnail view List View View the video files in list view E Delete Delete selected video files from the device View the Video File Click the video file and you can play the selected video file CH1_201311062003513 mp4 v Leo 1 Eg Br Dan gt 00 00 05 00 00 12 i ua gt Pause Play Pause Play the video Speed up down Increase Decrease the play speed of video 1x 2x and 3x are supported Details View the details of the video including file name time size etc a Delete Delete the video file Return Go back to the video file list interface Ey Record Go to the record interface of camera Delete the Video File You can delete the video files in batches on the File Management interface Steps 1 Click the icon EJ on the File Management interface to open the Delete File page 2 Select the folder to be deleted on the list and the icon E turns to 3 files in it will be deleted VIDEO 7 2 Picture Files Management IMAGE 20131106 20131022 20131021 20131014 20131011 20130929 KAF AUDIO e dee VIDEO Delete IMAGE 20131106 201
9. connected access point of Wi Fi networks and you can view the detailed information of the access point including status signal strength link speed and so on You can click Forget to disconnect the device from the Wi Fi networks Status Connected Signal strength Fair Link speed 1Mbps Security WPA WPA2 PSK IP address 192 6 22 100 Forget Cancel 7 Wi Fi Protected Setup WPS Wi Fi Protected Setup WPS is a computing standard that attempts to allow easy establishment of a secure wireless network With the WPS function the device can be connected to the Wi Fi networks with no need of password Press the WPS push button on the router and click WPS PUSH BUTTON on the device interface to search the WPS networks Then the device will be connected to the available WPS networks automatically without the password Press the WiFi Protected Setup button on your router It may be called WPS or contain this symbol 3 Cancel 10 1 3 Wired Network Settings Reserved The device can be connected to the wired networks and transmit the data via the network cables This function is reserved and it requires for the support of device extension base Click Settings gt NET gt Wired network to enter the Wired Network Settings interface ae CO Wired network Network 1910 Disconnected MAC address 00 40 30 3f ba d0 IP address EVENTS 10 2 Bluetooth Purpose You can use the PVR with Bluetooth
10. iO A A AAA AA 78 Indicators ina naa aaa ais 78 CIONS a eo 78 1 Introduction 1 1 Overview The portable video recorder PVR is operated by wireless control and transmits video and audio stream via 3G mobile networks or Wi Fi networks With the built in GPS module Bluetooth module high definition internal camera it provides the functionalities of locating the device capturing the picture recording the video etc The fingerprint identification is also supported by the device and it has various extension ports to meet the actual needs Thanks to these features PVR is widely applied to the surveillance projects of crime scene investigations remote depositions etc 1 2 Main Functions Network Settings Supporting TCP IP protocols Transmitting video audio and alarm data via network Wireless Settings Built in 3G and Wi Fi 2 4G 5 8G communication module connectable to platform for centralized monitoring Dual stream Transmission One for local high definition storage and one for network transmission Dual SIM Card Design Single card mode and double card mode are both available Two 3G SIM cards are supported in double card mode Two way Audio Supporting full duplex two way audio between device and platform Group Intercom Supporting half duplex intercom between devices in the same group Location Service Built in GPS module precisely positioning the device and uploading location information to surveillance center Blueto
11. maximum bitrate ranges from 64Kbps to 4Mbps Encoding Type VBR Variable Bit Rate and CBR Constant Bit Rate are selectable The value of selected CBR is the same with that of Max Bitrate and the value of VBR adjusts automatically under the Max Bitrate Oy 11 31 Network transmission camera INTERNAL CAMERA Stream type settings Video stream Resolution settings VGA 640 480 Frame rate settings 15 fps Max bitrate settings 768 Kbps Encoding type settings VBR 10 5 3 Capture and OSD Settings Capture Settings Steps 1 Click Settings gt MED gt Camera settings Oy Capture settings CAPTURE SETTINGS Internal camera Internal camera settings External camera External camera settings 2 Select the internal camera or external camera to set the corresponding capture parameters O Auto Upload Images Check the checkbox to upload the captured pictures to the platform automatically O Camera Sound Check the checkbox to open the camera sound Image Quality High Middle and Low are selectable O Image Resolution the size of the captured picture VGA 1 3M 3M and 5M are selectable O y w Internal camera settings INTERNAL CAMERA CAPTURE SETTINGS Auto upload images On Camera sound off Image quality High Image Resolution 5M 2592 1944 OSD On Screen Display Settings Steps 1 Click Settings gt MED gt OSD settings EG ys OSD settings OSD SETTINGS Internal camera Interna
12. the platform automatically the next time you start the PVR 4 Select the group to join in input the password and then click Join group You can also click Logout the log out the platform we wm x 24 Group Intercom Input group and password to join Group Pwd Join group Logout 5 Press the PTT button on the PVR You can start the group intercom with other devices after the PVR ticks twice during vibration pea FS Group intercom Join the group successfully User name waf Device ID waf In group 1 Permission Please speak Quit group 6 Release the PTT button and the group intercom service stops after the PVR ticks once 7 You can click Quit group to exit from the group intercom 7 File Management and Uploading Purpose 3 types of files are supported including video files picture files and audio files The files created on the same date are stored in one folder which is named by the date such as 20131106 The device provides a 16G memory and you can insert an external SD card to extend the storage capacity of the device Click the file application icon a on the Home Page and select the user account to enter the File Management interface y a 3 12 VIDEO IMAGE AUDIO 20131106 20131022 20131021 20131014 20131011 20130929 su NOTE The admin user account has the permission to view and manage the files of all users while the normal user account only has the permission to view
13. the top of the device will turn to red and flash rapidly Charge the battery timely to ensure the normal operations of the device Pull up the cover on the right side of the device and then insert the end of charger into the jack The status light is red in the charging process and it will turn to steady green when the battery is fully charged 2 5 Status Light The status light at the top indicates the current working status of the device For details see the table below Table 2 2 Status Light Description Status Light Function Description Red and steady Battery is charging Green and steady Battery is full a OS Device is exceptional e g battery level is lower than 15 3 200ms open 100ms close p By y 0 Green and normal flashing N Network transmission is in process 2 800ms open 400ms close ase The device is in recordin 1 1200ms open 600ms close id mE The larger the numeric is the higher the priority is 2 6 Startup and Shutdown 2 6 1 Startup Insert the power adapter or install the battery into the device and then long press the POWER button on the right side to start up the device The Login interface will be displayed on the screen after the startup process is complete 2 6 2 Shutdown Note Do not uninstall the battery to shut down the device To shut down or reboot the device long press the POWER button on the right side to enter the Shutdown interface shown as below P
14. will be displayed automatically 3 types of SIM card status are provided No card Normal and Abnormal Advanced Settings You can configure the advanced settings for 3G VPDN Virtual Private Dialup Network Steps 1 Click Advanced settings to enter the APN Settings interface The default 3G VPDN account will be displayed on the page ee APNs Unicom 3gnet 2 Click the button on the front panel to shown the hidden menu ER INNES Unicom 3gnet New APN Reset to default 3 Select New APN to create a new access point for the 3G SIM card You can select Reset to default to restore the default settings of the current APN O y w Edit access point Name Not set APN Not set Port Not set Username Not set Password Not set MCC 460 MNC 01 4 Input the service provider s name access point name APN username password Mobile Country Code MCC Mobile Network Code MNC and then select the authentication type fore To configure the 3G VPDN settings please contact the local operator and consult the network parameters 5 Click the button again and click Save to save the parameters White List Settings With the white list settings the device will get online offline log in out the platform according to the remote command message Up to 8 groups mobile number can be added to the white list You can send text with authorized mobile number to the SIM card No of device
15. 0p 1280 720 Frame rate J24 fps Bitrate J3 Mbps Flashlight 1 min Nore The external camera does not support the flashlight 3 Click the Record icon to start recording The Record icon turns to T You can view the record time in the upper left corner of the screen ore The duration time of the continuous recording is configurable For details see Section 10 5 1 Recording Parameters Settings Click the icon E to stop recording 5 Click the Video Picture icon in the lower left corner of the screen to view the record files For details see Section 7 1 Video Files Management 4 2 Capture Pictures Two capture methods are provided for PVR quick capture mode and capture on the Camera interface Option 1 Quick Recording Mode Click the Camera button on the right side panel of PVR capture pictures Option 2 Capture on Camera Interface Steps FA 1 Click the camera application icon on the Home Page to enter the Camera interface 2 Slide the Capture Record Switch icon to the left side click the Parameter Settings icon and then configure the capture parameters to meet the actual needs e Auto upload upload the captured picture to the platform automatically O Capture sound turn on off the capture sound O Resolution the size of the captured picture O Image quality the quality of the captured picture 2 Current camera internal Capture Auto upload wei Off On Capture sound JOff Resolution
16. 31022 20131021 20131014 20131011 20130929 Click the Delete button and then confirm the pop up dialog box The selected folder and the video 4 53 AUDIO Cancel Click the Image tab on the File Management interface and then click the folder to enter the Picture File Management interface You can view upload and delete the picture files p a VIDEO Upload Thumbnail View List View IMAGE 20131106 20131022 20131014 20131011 20130929 20130918 mM 10 15 AUDIO VIDEO IMAGE Upload the picture files to the platform View the picture files in thumbnail view View the picture files in list view E 10 16 AUDIO it Delete Delete selected picture files from the device View the Picture File Click the picture file and you can view the selected picture file Upload Upload the picture file to the platform Details View the details of the picture including file name time size etc Delete Delete the picture file You can swipe left or right to view another picture Upload Picture to Platform Before you start The device should be registered on the platform Steps 1 Click the icon w on the Picture File Management interface 2 Select the pictures to be uploaded 3 Click the Upload button and then confirm the pop up dialog box The selected pictures will be uploaded to the platform P y 1 55 VIDEO IMAGE E VIDEO IMAGE AUDIO Upload 2 Can
17. 6 11 26 I have a meeting to attend today Cancel You can also press the Menu button on the front panel to show the hidden menu and click Delete all messages to remove all the messages YES es Message 124122 This is a test message 739929 For test 219517 196176 11 26 I have a meeting to attend today Delete all messages 10 General Configuration 10 1 Network 10 1 1 3G Dialing Settings 2 SIM cards can be installed on the PVR including Main SIM Card and Slave SIM Card You can configure the 3G dialing settings for each SIM card Take the Main SIM Card as an example Steps 1 Click the icon on the home page or click Settings gt NET gt Dial settings to enter the Dialing Settings interface 2 Select the Main SIM Card ME Main SIM card settings YES ws Dialing settings SIM CARD SETTINGS Main SIM card Set parameters for main SIM card Dialing status Not connected Network standard Unknown SIM card status No card IP address 0 0 0 0 Advanced settings Set network access point APN White list AOV NODIG Enable Dialing fore When 3G dialing and Wi Fi networks are both available give priority selection to the Wi Fi networks Click Enable dialing on the main SIM card settings interface after installing the Main SIM Card Then the device will connect to the mobile networks and the information including the dialing status SIM card status network standard and IP address
18. Audio amp Video storage item and select the storage priority for the audio amp video stream O Internal Storage Priority Give the storage priority to the internal storage space O External Storage Priority Give the storage priority to the external storage space Internal storage priority External storage priority Cancel Storage Space Management You can view the status of the internal and external storage space and format the storage space if needed Steps 1 Click Settings gt DEV gt Storage 2 You can view the storage status of the internal storage and external storage Total Space the total capacity of the internal or external storage Available the free space of the internal or external storage Internal Memory Formatting Format the internal storage and then the video files audio files and picture files stored on the internal storage will be erased except the operating system data Unmount SD Card Click the Unmount SD card item before you remove the external SD card from the PVR Erase SD Card Format the external SD card and you will lose all the data stored on the SD card O ys Storage settings INTERNAL STORAGE Total space 28 38GB PWT Fle 27 60GB Internal memory formatting Clear all internal data SD CARD Total space 7 40GB 11 4 Applications You can view the current applications running on the device Steps 1 Click Settings gt DEV gt Applications 2 Swipe left or
19. Audio and Group Intercom 6 1 Two way Audio With the built in speaker and pick up the PVR supports the two way audio with the platform after the registration is complete no need for other associated equipment including headset and so on fore The two way audio is initiated by the platform and the PVR cannot send the two way audio request 6 2 Group Intercom Group Intercom application supports the half duplex intercom between the devices which are in the same group and thus you can talk to the user of another PVR To start the group intercom the device should be registered on the platform first Steps 1 Click the icon on the Home Page to enter the Group Intercom interface 2 Input the required information and click Register to register the device on the platform O Server the IP address of the computer running the platform O Port the communication port of the server The default value is 7333 O ID the device identification name registered on the platform O User the user name of the device ID account registered on the platform O Pwd the password of the device ID account registered on the platform wht PO Af Group Intercom Register ZSA EES waf Pwd Auto register when next boot Register Note The device ID and the corresponding user name and password should be registered on the platform first 3 Optionally you can check the checkbox of Auto register when next boot to register the device on
20. M Card Two card sockets are provided one for the main SIM card with a built in antenna and the other one for the slave SIM card requiring an external antenna When the device is working in the single card mode insert the SIM card into the Main Card Socket Perform the following steps to install the SIM card When the slave SIM card is adopted you need to install an external antenna at the top of the device The pictures below are for reference only 1 Remove the battery Loosen the 4 set screws on the rear panel of the device using a straight screwdriver and then remove the back cover and battery 2 Install the SIM card Carefully slide the SIM card into the SIM card socket until the card locks into place Make sure that the card s gold contacts face into the device and that the upper left angled corner of the card is positioned correctly The upper one is Main Card Socket 1 and the lower one is Slave Card Socket 2 3 Install the antenna Install the 3G antenna at the top of the device if the Slave Card Socket 2 is equipped with the SIM card 2 3 3 Installing the Micro SD Card The device supports 16G memory itself And you can also extend its storage capacity using a micro secure digital SD card The SD card socket locates under the rear panel of the device Perform the following steps to install the micro SD card 1 Remove the battery Loosen the 4 set screws on the rear panel of the device using a straight screwdriv
21. PVR will send alarm signal when the body temperature exceeds the upper limit 75 C to avoid the heat damage to the device 9 Message Before you start Register the PVR on the platform to realize the central management of devices For details see Section 10 4 Platform Purpose You can send message from the platform to the mobile terminal to release notification to the users of the device Note You can only use the VMS 7200 platform to send message to PVR For other platforms this function can be custom made to meet the actual needs Click the message application icon on the Home Page to enter the Message interface The messages received from the platform will be displayed on a list DO ys paa Message 960224 169773 This is a test message 18243 124122 39929 219517 196176 Delete The message that has been checked is marked as blue otherwise it is marked as white The PVR can receive up to 1000 items of messages and the new messages will cover the old ones when the number exceeds the limit To view the message Click the item on the list and you can view the detailed information of the selected message N ya Details Time 2013 11 26 10 07 05 User ty3 ID 169773 Content This is a test message To delete the message Click Delete under the list select the messages and then click OK to delete the selected messages O ys fea Message 124122 739929 For test 219517 19617
22. SD card O Install Package from External SD Card Select it when the upgrade package is stored on the external SD card Android system recovery lt 3e gt Volume up down to move highlight enter button to select reboot system now apply update from ADB install package from sdcard install package from ext sdcard Press the PTT button to activate the selected item Select the upgrade package from the storage space of SD card using the Audio Audio to move up down 7 Press the PTT button to upgrade the device The upgrading process will be complete after about 15 seconds Do not power off the device in the upgrading process Select the reboot system now item and click the PTT button to reboot the device 9 Input the user name and password to log in to the system and the new settings will be activated Extension Base Components Function Description Steps 1 Lift up the rubber strip on the bottom of PVR to expose the metallic contact 2 Put the device into the extension base 3 Fix the device to the extension base with the holder Note O You can connect the PVR to computer via the USB interface on the extension base for data backup O The PVR can access the internet via the network interface O The RS 232 serial interface provides debugging functionality for the device developer Indicators O The battery charging indicator is off when there is no battery in the battery chargi
23. T A TE 5 2 Vtem SAUD ea aaa A A EEOAE 6 DEl PACKI re CONTON andanada iaa 6 22 A r NEEE NONIE ETA E EA CA 6 253 SAMA ON ria 7 2 3 1 Installing and Uninstalling the Battery coccooocccnnnccnoccnnnnonanonnnnnnanononnnnnancnnnnonanons 7 223 2 Mstaline the SIN Card artis 8 233 Installing the Micro SD Ca urna dados 9 2 3 4 Installing and Uninstalling the External Camera ccccooccccnnccnoncnnnnnnnncnnnnnonaninnnnnnns 10 24 Charging THE Battery anwinsd A arene eae eee ana 11 DS SEATS A O II wearbinveeduutan eee 11 ZO Sarup ANG NU TIO Wa nearness 12 ZO MSU O eee es eee ames 12 ZG 2 SIME OW as 12 Bt Ba SIG ODEr IONS O 13 SL Usine the TOUCHS C Narda lt dada dada 13 A A aaa 13 3 HOME PIE Einen EEA E E A AEE A 14 SA INOUMCALION Cen E raan E E TE 14 3 9 CONNECTING PYR TO COMPULER iaa AA 15 4 Recordand Capture nesanrecan annn annu A A 17 AT Record Video FICS oniyi tnin a a a 17 A2 Capre PICUNG S oa E E E O onsets 18 AU ARC CONG NE A OA 20 6 Two way Audio and Group INTEFCOM ereire a T TTA ATTS 22 6 1 TWO Way AUO aen naaa AAA 22 62 GROUND Or COMM ean eE Er E O EEE EOR 22 7 File Management and UPON Pride da dd 24 Lr Video Files Management ninia A A AAA 24 Tide Picture Files Management a a 26 a Audo Files Manage Mens diiniita 28 S Na 31 e2 Manda ees eee mt mE NET Te ee RT OPS DO RT AEO 31 S33 Temperature AMA AAA 32 2o JIWIGSSAS Sic 2 tes cert soatcenn E ence ecnatednanteaegacnmataceattatanecnnstadaa
24. arameters settings Oy Recording settings RECORDING SETTINGS Internal camera The configured encoding parameters will be activated the next time the camera starts External camera The configured encoding parameters will be activated the next time the camera starts 2 Select the internal camera or external camera to set the corresponding recording parameters Recording Stream Video stream and composite stream are selectable The video stream contains only the video information and the composite stream contains both the video and audio information Resolution 1080P 720P D1 VGA and QVGA are selectable for the internal camera and only the D1 and CIF are selectable for the external camera Frame Rate the number of unique consecutive images called frame per second Full frame rate 24 fps 20 fps 15 fps 10 fps and 5 fps are selectable Continuous Recording Duration indicates the size of the record file Continuous 15 min 30min 45min 1h and 2h are selectable No time limit is set when Continuous is selected and the record file size cannot be larger than 1 99G Max Bitrate The greater the resolution and frame rate of the recordings are the greater the required bitrate is The maximum bitrate ranges from 64Kbps to 8Mbps O y w Recording camera INTERNAL CAMERA Recording stream settings Composite stream Resolution settings 720P 1280 720 Frame rate settings Full frame rate 24 fps Continuous record
25. cel ve fore The picture that has been uploaded to the platform will be marked with the icon G Delete the Picture File You can delete the picture files in batches on the File Management interface Steps 4 Click the icon EJ on the File Management interface to open the Delete File page 5 Select the folder to be deleted on the list and the icon E turns to E 6 Click the Delete button and then confirm the pop up dialog box The selected folder and the picture files in it will be deleted en VIDEO 7 3 Audio Files Management IMAGE 20131106 20131022 20131014 20131011 20130929 20130918 1 45 AUDIO VIDEO Delete IMAGE 20131106 20131022 20131014 20131011 20130929 20130918 1 45 AUDIO Cancel Click the Audio tab on the File Management interface and then click the folder to enter the Audio File Management interface You can view and delete the audio files a VIDEO IMAGE E Thumbnail View View the audio files in thumbnail view List View View the audio files in list view Delete Delete selected audio files from the device View the Audio File Click the audio file and you can play the selected audio file 20131108_141900 aac lt 00 00 12 mas Pause Play Pause Play the audio Details View the details of the audio file including the name time size etc Delete Delete the audio file You can click and drag the blue slider o
26. devices such as Bluetooth headsets Bluetooth printer etc Before using the PVR with Bluetooth devices you should pair them first Steps 1 Click the icon on the home page or click Settings gt NET gt Bluetooth to enter the Bluetooth Settings interface Swipe the slider of Bluetooth to the right side to enable the Bluetooth settings A w Bluetooth DS 6102HL Not visible to other Bluetooth devices AVAILABLE DEVICES NB XIEHAOQJIE NB WEIYI Test Hongmi phone NR 7ZHOUOING SEARCH FOR DEVICES Click the DS 6102HL item and the PVR becomes visible to other Bluetooth devices nearby for 2 minutes and it will stop in 2 minutes To disable the function immediately click the DS 6102HL item again Oy Bluetooth DS 6102HL Visible to all Bluetooth devices nearby 1 51 AVAILABLE DEVICES NB XIEHAQJIE NB WEIYI Test Hongmi phone NIR 7HOLIONING SEARCH FOR DEVICES The available Bluetooth devices nearby will be searched and displayed on a list Click the SEARCH FOR DEVICES button and you can refresh the information of the devices on the list O y Bluetooth DS 6102HL Not visible to other Bluetooth devices AVAILABLE DEVICES NB XIEHAOJIE NB WEIYI Test Hongmi phone NIR 7HOALIONING SEARCH FOR DEVICES Click the Bluetooth device item on the list to pair it with the PVR su NOTE If prompted input the passkey on the Bluetooth device side See the instructions abo
27. e y P a 1 43 Swipe the same finger on the sensor Cancel The selected finger will be marked with a blue point after the fingerprint registration You can select another finger and repeat the above steps to register the new fingerprint information Soy 7 45 Select another fingerptint or click Next to continue o ne 4 To delete the registered fingerprint information click the blue point and then click Yes on the pop up dialog box Attention Do you want to delete this fingerprint This operation is not recoverable Fingerprint Database Management Steps 1 Click the Fingerprint management button to enter the Fingerprint Database Management interface we NOTE If there is fingerprint registered in the system the registered fingerprint is required to enter the Fingerprint Database Management interface 2 Click the Delete Entire Database button and all the registered fingerprint information will be deleted 3 Click the Manage Fingers button open the Fingerprint Registration page and then you can select and delete the registered fingerprint or register the new fingerprint Fingerprint Management Delete Entire Database Manage Fingers 12 2 Log You can search the logs by the type or time according to the actual needs Steps 1 Click the icon on the Home Page to enter the Log Management interface Sys A Log management Main type All Minor type All Start tim
28. e 2013 11 13 00 00 00 End time 2013 11 13 23 59 59 Q Query 2 Select the main type of the logs from the drop down list including Alarm Exception Operation and Information You can also select All as the main type to search all the logs 3 Select the minor type of the logs under the selected main type Specify the start time and end time for the log search 5 Click the Query button The logs matching the search conditions will be displayed on a list and you can click the log item to view the detailed information O y w Log management Main Minor OP Boot Info Bluetooth connection GPS positioning Info OP Local login Info GPS cannot position Disable platform registration Enable platform registration Disable platform registration OP OP OP OP Query log 12 3 Maintenance Click Settings gt SYS gt Maintenance and you can maintain and upgrade the device O y Maintenance and upgrade PARAMETER CONFIGURATION Export configuration file Export the configuration file to the SD card Import configuration file Import the configuration file from the SD card Restore default settings Restore the parameters to default values Software installation Install from SD card Boot animation or logo Set boot animation or logo Export Configuration File The configuration file of the device can be exported to the SD card and thus you can configure other devices with the same setti
29. e SD card and the authorization code of the application is required Boot Animation and Logo Step 1 Click the Boot animation or logo item 2 Select the boot animation or boot logo for set 3 Select the package file or picture file from the SD card and you can set the boot animation and logo for the device as desired fore The boot animation should be in the zip format the boot logo 480 800 should be in the jpeg format O y w Boot animation or logo BOOT ANIMATION OR LOGO Boot LOGO Set the boot logo Boot animation Set the boot animation USB Debugging Only for the R amp D Research amp Development engineer to debug the device Restore Factory Settings Click the Restore factory settings item and click the Reset device button to restore the factory settings for the device O y w Restore factory settings This operation will clear all data in your device memory including System application data and settings Downloaded applications Other data Reset device Device Test Click the Device test item and you can detect the running status of the device s hardware module not recommended Running Information Only for the R amp D Research amp Development engineer to locate and solve the system error information 12 4 About Click Settings gt SYS gt About and you can view the system information including device model serial No and software version DO ys Ab
30. e device Solutions Edit the platform settings to according to the actual needs 2 Use another platform account to avoid the conflict 3 The indicator will light after the platform registration process is complete 4 Check the current indicator status For details see Table 2 2 Status Light Description O It s too slow to transmit images Possible Reasons a The current network signal is bad b The bitrate of the network transmission is too large Solutions 1 If 3G dialing is adopted check the current signal strength if Wi Fi networks is adopted check that whether there is another wireless network with the same frequency band and if yes use a new wireless network which has the only frequency band wee ai wore Wireless networks with the same frequency band cause interference to each other and it will decrease the network transmission bandwidth 2 Adjust the transmission bitrate according to the actual network bandwidth e The buttons of the device or the icons on the screen are out of use Possible Reason The device crashes Solution Reboot the device and try it again e The network transmission indicator does not light and the device is offline on the platform Possible Reasons a 3Gdialing failure b The platform settings are incorrect Solutions 1 Check the 3G dialing status Configure the 3G dialing settings again if needed 2 Configure the platform settings again according to the actua
31. e manually only available when Automatic Date Time is not enabled O Set Time Set the system time manually only available when Automatic Date amp Time is not enabled O Use 24 hour Format Check the checkbox and the system time will be displayed in 24 hour format e Choose Date Format Select the date format for display N p w Date amp time settings Automatic date amp time Use network provided time Automatic time zone Use network provided time zone Set date 11 12 2013 Set time 4 31 PM Select time zone GMT 00 00 GMT Use 24 hour format 1 00 P M Choose date format 12 31 2013 11 5 2 Language Settings Steps 1 Click Setting gt SYS gt Language settings 2 Click the Language settings item and then select the system language Language settings Language LANGUAGE l English Language settings English PX 12 Management 12 1 User Only the admin called administrator account has the permission to add the new normal user and edit the information of other users The created normal user can only edit the information of itself and cannot view the files recorded by other users Click the icon on the Home page or click Settings gt SYS gt User management to enter the User Management interface Oy User management admin Common user management PERSONAL SETTINGS Login mode 1 Use password to login enable Login mode 2 Use fingerprint to login disable Modify pa
32. ecord mode with the Capture Record Switch icon for the external camera two buttons are provided independently for the functionalities Take the internal camera as an example 4 1 Record Video Files Two recording methods are provided for PVR quick recording mode and recording on the Camera interface Option 1 Quick Recording Mode Long press the button mu on the front panel of PVR to start stop the recording The recording parameters can be set on the Camera interface Option 2 Recording on Camera Interface Steps gl 1 Click the camera application icon on the Home Page to enter the Camera interface Internal External Camera pma N y a Enable Disable Flashlight O f aer 2410 22 Tue 09 08 2 i se ee eee ee ee a N e 19 18 4 E i gt opa a ix ar ox v i Fo Gy Record f r v Parameter Settings in DS Py Capture Record Files Pictures w Capture Record Switch 2 Slide the Capture Record Switch icon to the right side click the Parameter Settings icon and then configure the recording parameters to meet the actual needs O Resolution the size of the image namely the number of pixels O Frame rate the frequency of the unique consecutive images called frames produced by PVR O Bitrate the number of bits that are conveyed or processed per unit of time o Flashlight the dwell time of the flashlight Y Current camera internal y Video Capture Resolution i 72
33. er and then remove the back cover and battery 2 Lift the sheet metal Push the sheet metal above the SD card socket along the opening direction marked on the sheet metal and then lift it up 3 Fix the micro SD card Slide the micro SD card into the socket provided with the gold contacts facing down until the card locks into the place By default the device should mount the micro SD card automatically 2 3 4 Installing and Uninstalling the External Camera There is a 5 megapixels camera built in the device which can be used to record videos or capture pictures You can also install an external camera onto the device if needed Perform the following steps to install or uninstall the external camera Do not rotate or bend the connector of the external camera 1 Installing the external camera Align the white arrow on the external camera with the white label on the device port and then insert it 2 Uninstalling the external camera Press the root of the interface lift it up and pull out the external camera after the snap joint is opened 2 4 Charging the Battery Nore Use the authentic original Hikvision battery and charger to ensure the safe operations of the device Rechargeable Lithium lon battery is adopted for the device and you can check the battery level from the battery icon displayed in the upper right corner of the screen When the battery level is lower than 15 the status light at
34. etwork y E Power saver POWER SAVER Brightness Time No operation for 5 min Disconnect the network in p Yes 11 2 Sound The volume of media and system notifications can be set as desired And you can also configure the sound mode of the device if needed Steps 1 Click Settings gt DEV gt Sound A p w Sound Volume Sound mode Normal 2 Set the corresponding sound parameters for the device O Volume Click and drag the slider to adjust the volume of the media and system notifications The media volume refers to the sound of two way audio with platform and record file playback The system notifications refer to the sound of button touch during the device operations O Sound Mode The sound mode can be set for the system notifications Normal Vibration and Mute are selectable Media volume Vibration System notifications a Normal Cancel 11 3 Storage Switch Storage Space The PVR provides a built in 16G storage space internal and a micro SD card can also be installed on the device external Priority storage space can be set and the files will be saved on the other storage space until the priority storage space is full When both the storage spaces are full a message will be displayed to send a notification Steps 1 Click Settings gt MED gt Storage settings Oy Storage settings STORAGE SETTINGS Audio Video storage Internal storage priority 2 Click the
35. ing durat Continuous Max bitrate settings 3 Mbps 10 5 2 Network Transmission Settings The network transmission parameters of the internal camera and external camera can be configured including the stream type resolution frame rate maximum bitrate and encoding type The new network transmission settings will be activated the next time the platform gets stream Steps 1 Click Settings gt MED gt Network transmission settings y 11 31 Network transmission settings NETWORK TRANSMISSION STREAM SETTINGS Internal camera The configured encoding parameters will be activated the next time the platform gets stream External camera The configured encoding parameters will be activated the next time the platform gets stream Select the internal camera or external camera to set the corresponding transmission parameters Stream Type Video stream and composite stream are selectable The video stream contains only the video information and the composite stream contains both the video and audio information Resolution 720P D1 VGA and QVGA are selectable for the internal camera and only the D1 and CIF are selectable for the external camera Frame Rate the number of unique consecutive images called frame per second Full frame rate 24 fps 20 fps 15 fps 10 fps and 5 fps are selectable Max Bitrate The greater the resolution and frame rate of the transmitted video are the greater the required bitrate is The
36. l camera OSD settings External camera External camera OSD settings 2 Select the internal camera or external camera to set the corresponding OSD parameters OSD Check the checkbox to enable the OSD settings OSD Content Select the OSD content for display including time GPS and camera No E NOTE Only the time OSD is configurable for the device OSD Display Position Set the display position of the OSD content on the Camera interface Check the OSD Effect Get the preview of the new OSD settings Sys Camera OSD settings ONID Enable OSD content Select the OSD content to display OSD DISPLAY POSITION Time Left Camera No Left QUERY RESULT Check the OSD effects 11 Configuration 11 1 Power Saver The power saver settings help to stretch the battery life to ensure the long operation time of the device Steps 1 Click Settings gt DEV gt Power saver 2 Set the corresponding parameters for the power saving mode Oo Brightness Click and drag the slider to adjust the brightness of the screen O Time The device will lock the screen automatically if no operations occur during the selected power saving time 15s 30s 1min 2min 5min 10min 30min and Never sleep are selectable O Disconnect the Network in Power Saving Mode Select Yes to disconnect the device from the network such as 3G mobile networks Wi Fi networks etc in power saving mode and select No to always connect the device to the n
37. l needs 3 Restore the device to factory settings and configure the parameters after the device reboot e The network transmission indicator lights and the device is offline on the platform Possible Reason The platform settings are incorrect or have not been configured Solution Check and configure the parameters on the platform side O The fingerprint cannot be recognized Possible Reason The fingerprint information has not been registered on the device Solution Register the fingerprint information on the device first Upgrade Steps 1 Connect the device to the computer via a USB cable after logging in to the system And then turn on the USB storage of the device 2 Select the disk directory of the device on the computer and then copy the upgrade package to the storage space of device It is recommended to store the upgrade package under the system root directory 3 Turn off the USB storage disconnect the device from the computer and then power off the device Restart the device and at the same time long press the Audio button on the device for 15 seconds You will enter the System Upgrade interface 4 options are selectable and you can select the item using the Audio and Audio button O Reboot System Now Reboot the device Apply Update from ADB Upgrade device by package stored on the computer not recommended O Install Package from SD Card Select it when the upgrade package is stored on the internal
38. n the process bar to adjust the audio play process Delete the Audio File You can delete the audio files in batches on the File Management interface Steps 1 Click the icon c on the File Management interface to open the Delete File page 2 Select the folder to be deleted on the list and the icon E turns to 3 Click the Delete button and then confirm the pop up dialog box The selected folder and the audio files in it will be deleted p a 2 53 VIDEO IMAGE AUDIO 20131108 20131106 20131022 20131011 20130929 20130910 Delete Cancel 8 Alarm 8 1 Acceleration Alarm When the PVR drops down at a fast speed it will generate acceleration alarm and then upload the acceleration alarm to the platform Meanwhile the PVR will vibrate to send a notification with the message Acceleration alarm displayed on the interface 1314 11 8 2013 Friday User Settings PA am eS Mil Camera Recorder File 3 2 Manual Alarm In emergency conditions press the Alarm button on the side of PVR manually Then the manual alarm information will be uploaded to the platform and the PVR will vibrate to send a notification with the message Manual alarm displayed on the interface at 0 11 8 2013 Friday Alarm gt Y Wi Fi Dialing e Manual alar 8 TA d SY GPS User Settings we eS Th AA Camera Recorder File 8 3 Temperature Alarm With the built in temperature sensor the
39. ncrease or decrease the audio volume Audio Audio Zoom in or zoom out on the Camera interface EE w a s Power supply Supply the power for the device USB interface Universal Serial Bus USB port for connecting to the computer Long press it to turn on off the device Press it to lock unlock the screen Alam Long press it to send the manual alarm External camera interface 3G antenna Install the 3G antenna when the slave SIM card is used interface 5 mega pixel internal camera with Flashlight built in Extension base Connect to the device extension base interface 2 3 Installation Install the external camera if needed 2 3 1 Installing and Uninstalling the Battery The PVR is equipped with one battery to ensure the device normal working Perform the following steps to install or uninstall the battery fore Turn off the power of all the related equipment when you install or uninstall the battery 1 Remove back cover Loosen the 4 set screws on the rear panel of the device using a straight screwdriver and then remove the back cover 2 Install the battery Insert the battery into the opening on the back of the device making sure the gold contacts on the battery align that on the device And then gently press down to secure the battery 3 Uninstall the battery Lift the battery up from the device bottom side and then remove it away from the device 2 3 2 Installing the SI
40. ng cabin Oo Plug in the power adapter after the battery is put into the battery charging cabin and the power supply indicator lights O The battery charging indicator lights in red during the charging process and it turns to green when the charging is complete Cautions O Avoid heat source and direct sunlight O Charging temperature ranges from 32 F 0 C to 113 F 45 C in voltage of 8 4V O Use only the battery and charger specified by the manufacturer 0301001031203
41. ngs Steps Click the Export configuration file item 2 Select the external SD card or internal SD card for export 3 Select the saving path for the configuration file 4 Click the Export button to export the configuration file to the SD card m Nore The exported configuration file is formatted as PVR_version_date CFG N ys Export configuration file re External SD card Tr y Internal SD card Cancel Import Configuration File The configuration file can be imported to the device from the SD card and the imported configuration file should match the device Steps Click the Import configuration file item Select the external SD card or internal SD card for import Select the configuration file from the SD card Click the Import button to import the configuration file to the device 2 Reboot the device to activate the new settings after the importing process is complete Sys Import configuration file rm E SW External SD card y Internal SD card Cancel Restore Default Settings Click the Restore default settings item and reboot the device Then you can restore the default parameters of the device Restore the default settings The system will automatically reboot after restoring the default settings OK Cancel Software Installation You can install the application files downloaded on the SD card E NOTE The application program should be stored on the root directory of th
42. ns a The volume of the audio output on the device side is low b The volume of the microphone on the platform side is low c The headset is broken Solutions 1 Adjust the volume of the audio output on the device side 2 Adjust the volume of the microphone on the platform side 3 Replace the broken headset e The SD card cannot be detected Possible Reasons a The SD card is damaged b The file system in the SD card is damaged Solutions 1 Insert the SD card to the card reader and then connect it to the computer If you cannot open the storage space of SD card replace the damaged SD card 2 Back up the data stored on the SD card and then format it Oo 3G Dialing failure Possible Reasons a No 3G SIM card is installed on the device b The format of the 3G SIM card does not match that of the device c The external antenna has not been installed when the slave SIM card is used Solutions 1 Install the 3G SIM card on the device 2 Select the 3G SIM card which has the same format of the device 3 Install the external antenna when using the slave SIM card O The network transmission indicator does not light after successful dialing Possible Reasons a The platform settings are incorrect b The platform account conflicted c It s in the platform registration process d Only one indicator is available for the device and there is a process with higher priority than network transmission running on th
43. oth Built in Bluetooth module supporting two way audio and file printout using Bluetooth headset or printer Biometric Authentication Fingerprint identification technology providing high security for access control User Management User accounts assigned with different permissions in favor of central management and maintenance Built in 5 megapixels camera taking high definition pictures Supporting external camera to realize simultaneous work of internal amp external cameras Supporting one touch capture Messages can be sent from platform to devices to release notification One touch manual alarm can be uploaded to the platform Supporting acceleration alarm in special case such as device fall off Temperature alarm avoiding heat damage from the device Built in LED flash lamp working as the flashlight of internal camera or electric torch Automatically switch to power saving mode to extend the life of battery Supporting date and time settings 1 3 Product Features O Easy to carry the mobile terminal meeting the actual needs of individual work O Both internal camera 1080P 720P D1 VGA and QVGA and external camera D1 and CIF are supported O Adopt H 264 digital coding technology to reduce the storage pressure of the storage medium in the device O Built in 3G and Wi Fi module transmit audio and video data stably in mobile conditions using optimization algorithm O Built in GPS positioning module records the locations of the event
44. out Device model DS 6102HL Serial No 20130822CHhk661476700001 Software version V3 0 0_build20131023 Appendix Troubleshooting O The device cannot start up Possible Reasons a The battery has not been installed on the device b The battery is out of power Solutions 1 Install the battery on the device 2 Connect the power adapter to the device 3 After connecting the device to the power adapter wait for the icon of charging battery which will be displayed on the screen And then long press the Power button to start up the device Oo No signal is displayed on the screen Possible Reasons a The camera is set in External Camera mode while the external camera has not been installed b The external camera is out of work Solutions 1 Switch the camera to Internal Camera mode or install the external camera 2 Check the external camera and replace it if needed e There is no audio in record files Possible Reason The recording stream is set as Video Stream Solution Set the recording stream as Composite Stream o Failed to start the two way audio with platform Possible Reasons a The network signal is unstable b The two way audio function of the device has been enabled by other client Solutions 1 Move the device to places where the network signal is available 2 Try it again after the two way audio of the device stopped e The voice heard on the device side is small Possible Reaso
45. ower off Reboot Q Click Power off and click OK to shut down the device Click Reboot and click OK to reboot the device Click the icon to enable the silent mode click the icon CJ to enable the ring mode to enable the vibrate mode click the icon 3 Basic Operations 3 1 Using the Touchscreen You can operate the PVR by using the touchscreen Click To act on items on the screen such as application and settings icons to type letters and symbols using the onscreen keyboard or to press onscreen icons you simply click them with your finger Swipe Touch the target region on the screen and then move your finger across the surface of the screen to reach the desired position For example you swipe left or right to view the next or previous picture Pinch When viewing pictures you can zoom in and out by placing two fingers on the screen at once and pinching them together to zoom out or spreading them apart to zoom in 3 2 Login You enter the Login interface after PVR startup Input the user name and password in the corresponding text fields to log into the device By default the user name and password are admin and 12345 User admin Pwd Input secret Login Use fingerprint or password to log in 3 3 Home Page You enter the Home page after log into the PVR Status Bar At the top of the screen the status bar indicates the current status of PVR including recording status GPS status
46. right and you can view the detailed information of the applications Note DOWNLOADED The downloaded applications will be displayed on the screen You can also view the used space and free space of internal storage at the bottom of the interface RUNNING The current running applications will be displayed on the screen You can also view the used space of RAM and free space of RAM at the bottom of the interface ALL All the applications on the device will be displayed on the screen You can also view the used space and free space of internal storage at the bottom of the interface Do not delete or uninstall the programs at will for it may cause damage to the system Ny 4 02 Apps SHOW CACHED PROCESSES RUNNING 5 Settings 34MB 1 process and 0 services SN SnapPea transpo 9 7MB A 1 process and 1 service 19 20 Media 8 2MB 1 process and 1 service 19 04 VQ Message 2 7MB 1 process and 1 service 19 19 11 5 System Time and Language 11 5 1 Date and Time Settings You can configure the system data and time to meet the actual needs Steps L 2 Click Setting gt SYS gt Date and time Set the corresponding date and time parameters for the system Automatic Date Time Check the checkbox and the system will use the network provided time automatically O Automatic Time Zone Check the checkbox and the system will use the network provided time zone automatically O Set Date Set the system dat
47. selected user will be deleted Delete the selected user OK Cancel Assign Permissions for Normal User Steps 1 Click the Common user management item and then select the user on the list 2 Check the checkboxes to assign the permissions for the selected user 9 permissions are selectable camera settings file management GPS settings Wi Fi settings 3G settings platform management time settings maintenance and storage management E p a 44 user Camera settings File management GPS settings Wi Fi settings 3G settings Platform management Time settings 12 1 2 Personal Settings You can configure the personal settings for the current user account to meet the actual needs including the login mode password fingerprint etc O Login Mode 1 Check the checkbox and the password is required for the system login sz NOTE It is highly recommended to enable the Login Mode 1 to ensure the system security O Login Mode 2 Check the checkbox and the fingerprint is required for the system login _ Nore The Login Mode 2 is configurable only when the Login Mode 1 is enabled You can use either the password or fingerprint to log into the system when both the modes are enabled Modify Password Modify the password of the current user account if needed Fingerprint Management Register or delete the fingerprint information Password Lock Check the checkbox and the password is required to unlock the system
48. ssword Fingerprint management Password lock Use password to unlock 12 1 1 Normal User Management You can add edit and delete the normal users after logging into the system as the administrator Add a Normal User Steps 1 Click the Common user management item and then click the Add button to open the Add User page Common user management a w Delete 2 Input the user name password and confirm password in the corresponding text fields NOTE O The user name and password can only contain the English alphabets numeric and _ O The user name cannot be longer than 20 characters and the password cannot be longer than 16 characters DU ys 1 Add user New user User User name Pwd Password Confirm Password Cancel 3 Click OK to confirm the settings The created users will be displayed on a list Common user management user user2 user3 user4 Click a user to modify its permissions Add w Delete Delete a Normal User Steps 1 Click the Common user management item and then click the Delete button to open the Delete User page E p a AAA 24 Common user management user user2 user3 user4 Delete Cancel 2 Select the user to be deleted on the list The icon E of the selected user turns to A MM p a 6 59 NA 24 Common user management user user2 user3 user4 Delete 1 Cancel 3 Click the Delete button and confirm the pop up dialog box The
49. tmaneasceummecaatauteuecuneteinetauteuncemes 33 LO General Contar Nadia 36 TOA ING TA ONAN aca aE E T ETTE T E AA a 36 IO EL AGDIlinme Settings ina aaa iia 36 10 eZ WIF SEINE S ai 40 10 1 3 Wired Network Settings Reserved occccccoooccccnnononocnnnnonanicnnnnonanocnnnonaninonos 42 HO 2 BIC TOO Li is taveccincdrccnmndatemen ANEO AE AAO 43 OSO PS o 46 GPP AEM O 47 10 5 Audic and Video Paramieter sidad 48 10 51 Recording Parameters SettlA ES iii ada 48 10 5 2 Network Transmission Settings ccccccoooccnnnccnonnnnnnnnnnnconononanonnnnnonanonnnnonanonnnss 49 1953 Capture ant OSD Seto 51 TE CONT CUA OM ica 53 11 POWT SV atada 53 VALS A AA A AAA AAA 53 A 54 A A o III O 56 TALS System Mime ana Languates cia A A 57 511 Date ana Time Settings li dial tein 57 11 52 Language SENES aa 58 I2 Mande Mentes oso 59 DA A adalat diene leone OAR EO T OOA de OOC EONO O 59 2r Normal User Managemen beeni a eee tee 59 1212 APCS OMAN CEN ag hia hace O 63 121 3 Fingerprint Management siccsscsveudsacensacssacsmecuscossecessannids aeapesusansnecuscere se staenmiantas 64 MEDD VE esate Saale ag ear aoe si E or wa cts deco ease aca webcasts aaa at weed Siam wal ote evra wd aan aaa teeendde 67 123 Via WAC Os in italia ee eee ae oe ee eons 68 IZAADOU aaa 72 ADO NOD 73 TOUDIESNOOUNE nidad 73 UDI AAA AAA 75 A TO 76 A se cerce tae enced ss tectaecide cade tee encore cca eect ace ue teats eae coed eaen ceeds 76 Function DESCRDUON
50. to operate the device remotely Text on and the device will get online log in the platform text off and the device will get offline log out the platform ay BEE White list settings Delete white list To add mobile number to white list Click the Add button input the mobile number on the text field and then click OK to save the settings YES es White list settings Add a new number Number Input a number OK Cancel alla lalalralelale OPRA ALT 27 2123 To delete mobile number from the white list Click the Delete white list button select the mobile number on the white list and click Delete to delete the selected mobile number from the white list ae HOR White list settings 13677778888 Delete white list Standard Format The standard format has been set when the device is delivered including CDMA and WCDMA fore The standard format of the installed SIM card should be the same with that of the device 10 1 2 Wi Fi Settings You can connect the device to the Wi Fi networks and transmit the data via the Wi Fi Steps 1 Click the icon on the home page or click Settings gt NET gt Wi Fi settings to enter the Wi Fi Settings interface 2 Swipe the slider of Search network to the right side to enable the Wi Fi settings A ER Wi Fi settings Search network BAND SETTINGS AND NETWORK INFORMATION Wi Fi frequency band Auto MAC address 1c e2 cc c7 24 f9 IP
51. tude 120 205704 Time 2013 06 14 10 50 40 Positioning accuracy m 172 00 Speed km h 3 83 10 4 Platform The PVR can be connected to iVMS 7200 series platform providing functions including live view two way audio alarm etc Steps 1 Click Settings gt NET gt Platform settings to enter the Platform Settings interface O y Platform settings PLATFORM SETTINGS Platform OFF Platform IP address 192 0 7 166 Platform port 7660 Device ID hmq9 2 Swipe the slider of Platform to the right side to enable the platform settings and then input the required information o Platform IP Address the IP address of the computer running the platform server o Platform Port the network communication port of the platform The default value is 7660 O Device ID the identification name of the device The device ID should be registered on the platform first O y Platform settings PLATFORM SETTINGS Platform Platform IP address 192 0 7 166 Platform port 7660 Device ID hmgq9 10 5 Audio and Video Parameters 10 5 1 Recording Parameters Settings The recording parameters of the internal and external camera can be configured including the recording stream type resolution frame rate duration and maximum bitrate You can also configure the basic parameters on the Camera interface The new recording settings will be activated the next time the camera started Steps 1 Click Settings gt MED gt Recording p
52. ut the passkey that came with the Bluetooth device To pair with Test Make sure that it is showing this passkey 401310 Pair Cancel 6 Click the Pair button and the Bluetooth device will be displayed on the Paired Devices list after the pairing process is complete Oy Bluetooth DS 6102HL Only visible to paired devices PAIRED DEVICES Test AVAILABLE DEVICES NB XIEHAOQJIE NB WEIYI Hongmi phone SEARCH FOR DEVICES 7 To disconnect the Bluetooth device click the icon E of the paired device click the Unpair button and then confirm the pop up message box Oy Paired Bluetooth device Rename Test Unpair 10 3 GPS With the built in GPS positioning module the current longitude latitude and speed of the device will be detected and displayed Steps 1 Click the icon on the home page or click Settings gt NET gt GPS settings to enter the GPS Settings interface DU ys O GPS settings GPS switch Latitude Unknown Longitude Unknown Time Unknown Positioning accuracy m Unknown Speed km h Unknown 2 Swipe the slider of GPS switch to the right side to enable the GPS settings The longitude latitude time positioning accuracy and speed of the device will be displayed automatically when the GPS signal is available Nore Locate the device in open space to receive the GPS signal if no data is displayed Ny O GPS settings GPS switch Latitude 30 187790 Longi
Download Pdf Manuals
Related Search