SD23 manual
Contents
1. Delete single deletes a picture Press OK to display the options for deletion Select N or x based on the displayed message An option marked with Y will be deleted Delete all deletes all the unprotected pictures Protecting a File On the video photo or mixed file interface you can protect a video file a photo file or all the files To protect a file perform the following operations Select a file to be protected Press the M key to display the operation interface The following options are displayed on the operation interface Protect single protects a file Press OK to display the options for protection After you select a file to be protected and press OK the system automatically returns to the playback interface Protect all protects all the files Press OK to display the options for protection After you select all the options to be protected the system automatically returns to the playback interface Unlock single unlocks a protected file Press OK to display the options for protection After you select a file to be unlocked and press OK the system automatically returns to the playback interface Unlock all unlocks all the protected files Press OK to display the options for protection After you select all the files to be unlocked and press OK the system automatically returns to the playback interface Note For a protected file the f icon in gray is displayed in the bottom left corner of the2. Magibam USER MANUAL Magical application o Ultrawide angle Camera with installation interfaces housing free light and convenient Automatic and continuous shooting HD 080i 60fps Dynamic HD recording F2 Glass lens 9 1 Sm Cyclic recording 180 optional inverse shooting m Homi HD Low lux shooting output interfaces TEN ENA A 16 million pixel shooting DL Independent stop key for blinded operations Built in dual microphone recording and external microphones 10X digital zooming Laser indicator 646B Maximum capacity expansion Waterproof housing and lens protected design fr Remote controller with back clips and binding interfaces 30 60 high temperature environments Contents A A S a 1 E E o Poo E ENIM IMMER MEN NU UI UUE 1 NEY MM PA TTE 2 Eo ps A CO UU TH HR 2 SP E 3 A m L 5 A e 6 A O OS 7 Parameter a Le TNT e Pe O PO ES PU PE E rE Ena edad daS DC 9 A e UE II 14 Storage and Play A O A 23 Installation and Use or a Backup Battery D23 au nennen 24 POWER SUB M 25 Articles in the Packing BOX ae nee A A 25 Optional A om DOO OO DET PR 26 HE fat of alate pos a o AAA o
3. to enter the EN system setup interface Press F or to display the Date Time menu Press OK to display the Date Time interface shown as follows The digits under the cursor will turn blue and adjustable aee com Press or to adjust the date or time Press OK after adjusting the date or time Press the M key to exit the interface Date time AE Es Parameter Settings To set parameters perform the following operations n the preview mode under power on state press the M key to display the menu interface Press the lt or gt key to choose a left or right option from the menu interface Press the or key to choose an upper or lower option from the menu interface After selecting an option press OK to save settings Press the M key again to save the setting and exit the interface Note After power on the video camera adopts all the preset settings except for audio recording mode You can change settings as you desire D Set video camera parameters a Exe Select 4 the default mode for video recording and b for audio only b Resolution for video recording Select the desired resolution for video recording You can set this parameter to the 10801 1080P 960P 720P or WVGA resolution 11880 1250 1230 Bae E4 For the 10 t E ui uis ei Nn PAL system 1920x10801 50f 1920x1080P 25f
4. Moves a picture rightwards Moves a picture leftwards Resets and plays a file from the beginning when your press this key In zoom in mode switches between the Returns to the playback interface when you press this key again and keys 3 Playing an Audio File To play an audio file perform the following operations On the mixed file interface press the gt or key to display all the audio files in amp mode Select the required file and press OK to play it When playing an audio file you can use the following keys Turns up the sound volume Turns down the sound volume No function is provided No function is provided Resets and plays a file from the beginning when your press this key Starts or suspends playing an audio file when you press Returns to the playback interface when you press this this key key again Note The fast forward and rewind functions are not provided for playing an audio file 18 aee com Deleting Protecting and Automatically Playing a File In playback mode you can press the M key to delete protect and automatically play a file Deleting a File On the video photo or mixed file interface you can delete a video file a photo file or all the files To delete a file perform the following operations Select a file to be deleted Press the M key to display the operation interface The following options are displayed on the operation interface
5. 1280x960P 25f 1280x720P 50f 1280x720P 25f 848x480P 100f 848x480P 50f 16 9 16 9 4 3 16 9 16 9 16 9 16 9 For the 1 320 jen ER ui 1220 B4B Eds NTSL system 1920x10801 60f 1920x1080P 30f 1280x960P 30f 1280x720P 60f 1280x720P 30f 848x480P 120f 848x480P 60f 16 9 16 9 4 3 16 9 16 9 16 9 16 9 G aee com View This parameter involves three types of views broad view p medium view E3 and narrow view E3 The following example shows the same picture in different views Broad View Medium View Narrow View The preceding views apply only to the 1080P or 1080i HD video recording and photo modes You can select a view angle as you desire d e f Bit rate This parameter can be set to High bit rate sees or Normal If this parameter is set to High pictures are clearer but the file size increases j Laser SYNC video Select to enable the laser indicator or select the default option to disable the laser indicator Pre video In the preview state press the M key to enter the video recording setup interface choose Pre video to enable the pre video recording function In this mode press the Video key to enable the pre recording function that is the video recording starts without saving the data press the Video key again the last a few seconds of the pre recorded video will be saved as the starting part of the video recording file Auto video In the preview state p
6. A 2ER 27 Precautions Tor the Waterproof housing nn een 28 Precautions for the 3M Dual side Sponge Rubber ri ecksvnessieusveensdacdvadceancnenantasvaveerdyedesaaeceess 28 ha ia ales ere A 5 P Q 28 Precautions aee com When using the SD23 video camera adhere to the following precautions T Do not drop knock or shake the video camera 2 Do not put the video camera close to an object that generates strong magnetic field such as a magnet or a motor Do not put the video camera close to an object that emits powerful radio waves for example an antenna Strong magnetic field may cause faults on the video camera or damage the image voice data 3 Do not expose the video camera to high temperature or direct sunshine 4 Do not put the memory card close to an object that generates strong magnetic field such as a television set a speaker or a magnet Do not put the memory card in a place where static electricity is easily generated 5 Disconnect the power supply to stop recharging the battery immediately when over heat smoke or peculiar smell occurs during recharging 6 Keep the video camera out of reach of children during recharging because the power cable may cause asphyxia or electrical shock on children 7 Store the video camera in a cool dry and dust free place Preface Thank you for purchasing AEE SD23 series compact high definition HD digital video camera which has the following charac
7. AV intertace TV set or HDMI interface AV data cable HDMI interface HDMI data cable Note ile 2 Before removing the USB data cable power off the SD23 video camera When the power switch is in the OFF position you can recharge the battery on the SD23 video camera At this time the red indicator blinks slowly When the power switch is in the ON position you can copy the recorded files from the SD23 video camera to the computer Connecting with an HDMI Cable or an AV Cable You can play recorded files on a TV set or a monitor that has a HD port using an HDMI cable to connect the SD23 video camera to the TV set or monitor Note 1 After connecting to a monitor by HDMI cable select the proper 23 input source for the SD23 video camera to play files When using an AV cable connect the terminals of the AV data cable to the ports in the same color on the TV set or monitor Ensure that the TV set or monitor is properly grounded Adjust the parameter settings of the monitor to achieve the optimal display effect 23 Installation and Use of a Backup Battery D23 aee com 1 Installing a Battery You can install the D23 battery onto the SD23 video camera without setting any parameters for power supply as shown in the following figure 2 Checking the Battery Power You can gently press the Power key to check the power of the backup battery The LED indicator on the battery blinks for t
8. SD23 video camera is not used for a long time remove and maintain the battery properly and recharge the battery every six months to ensure the battery performance 3 During recording enabling the digital zooming function may affect the image quality 4 Shooting view angles are slightly different in different working modes of the video camera 5 If a video file is large a computer or a special purpose player is preferred for smooth play 28 G N N Patent E Product H China Hi Tech Patented Sell well over Europe C Enterprise JV Products ok America Asia J Please read this user manual carefully and thoroughly before any attempt to install and operate this product and re tain it for your future reference aee com Ace AEE TECHNOLOGY CO LTD Add AEE Hi Tech Park Sun Industrial Area Xili Nanshan District Shenzhen P R C Tel 86 755 29518989 Fax 86 755 29518898 E mail trade aee com aee com 31 aee com 32 aee com 33 aee com 34
9. play it When playing a video file you can use the following keys Turns up the sound volume Turns down the sound volume Plays a file in fast rewind mode when you press and hold this Plays a file in fast forward mode when you press key for a short time and hold this key for a short time lt E and plays a file from the beginning when your press this Starts or suspends playing a video file when you 3 Key press this key Returns to the playback interface when you press this key again Plays a file in slow rewind mode when you press and hold this Plays a file in slow forward mode when you press key for a long time s and hold this key for a long time K Note You can set the fast forward and rewind functions to a 2 4 8 or 16 X speed You can also set the slow forward and rewind functions to a 1 2 or 1 4 X speed During the slow or fast play you can press OK to resume normal playing Size aee com 2 Viewing a Photo File To view a photo file perform the following operations On the photo file interface ID press the gt or lt key to display all the files displayed in thumbnails Select the required file and press OK to view it When viewing a photo file you can use the following keys Zooms in a picture Zooms out a picture In zoom in mode locks a picture and moves it downwards when In zoom in mode locks a picture and moves you press OK it upwards when you press OK
10. preview interface After being unlocked a file is unprotected and the ii icon in blue is displayed in the bottom left corner of the preview interface A protected file cannot be deleted but can be deleted by a formatting operation 19 3 Automatically Playing a File aee com In the photo file interface the SD23 video camera can automatically play photos in sequence every five seconds To automatically play a file perform the following operations Enable the playback function and press OK 8 Using a Remote Controller The SD23 video camera is equipped with a remote controller which is used for control of video recording shooting as well as turning on off a laser After you pressing the corresponding key the red indicator on the remote controller blinks once The following figure shows the functional keys of the remote controller To match the functions of the remote controller with those of the SD23 video camera one to one perform the following operations for code pairing before using the remote controller Video key Photo key Stop key Press and hold the Photo key for five seconds to enable or disble the laser function Press the Photo key on the SD23 video camera in power off mode Turn the power switch to the ON position Release the Photo key Then hold the Photo and Stop keys on the remote controller once within five seconds After successful code pairing t
11. E mark BS mark amp China Power A Japan Power U K Power Certification Certification Certification Note The surface temperature of a power unit in use may increase and this situation is normal Articles in the Packing Box The articles in the packing box are as follows SD23 Remote Dedicated Standard Backup Flat mounted Flat surface telecamera TFT monitor controller waterproof battery battery assembly accessory ey housing y la E hn Bracket Micro SD Power adapter AV output cable USB cable Cloth bag strap CDROM User s Manual card gt E w WT 25 Optional Accessories The optional accessories for the SD23 video camera are as follows Portable power unit Portable power unit Bicycle mounted 2500 mAH 850 mAH accessory Soft and flat mounted HDMI output cable Helmet top mounted accessory accessory ES CAL 9 The precautions for movable accessories are as follows 1 Use a rubber stopper for removable components 2 Use the soft and flat mounted accessory only on a smooth plane in a car 26 Bicycle mounted accessory Back Clip aee com Glass suction bracket L shaped helmet accessory Technical Specifications aee com Technical specifications of the SD23 video camera View ang 1080P 1920x1080P 30 frames second Number of pixels eee bod 1080i 1920x1080 60 frames second 1000 mAN Iithi Tem E di 960P 1280x960P 30 frames second m ithium
12. On the system setup interface choose Exe and press OK to display the Audio option Press OK to display the video and audio options and choose Video Press OK again to exit the setup interface The video camera restores to the preview state for video recording 16 aee com Note a Power on the video camera again to restore to the video recording mode After audio recording is complete you can also press the EY key twice to restore to the video recording mode b Press and hold the Stop key for two seconds to directly change the video camera to the ready state for audio only 6 Playing Back a File You can view the recorded audio video and photo files on the SD23 video camera To view a file perform the following operations Press the 9 key to display the playback interface Press the key again to exit the playback interface Select IE the video files interface to view a recorded video file Select id the photo files interface to view a photo file Select IB the mixed file interface to view all the video audio and photo files If there are many files it takes a few seconds time for the video camera to display the preview interface 1 Playing a Video File To play a video file perform the following operations On the video file interface ED press the gt or lt key to display all the files displayed in thumbnails Select the required file and press OK to
13. Shooting Press OK to set the time in auto shooting mode to OFF 3 s 5 s or 10 s Press the gt key and choose Timed Shooting Press OK again to save and exit the interface Press the M key to exit the camera setup interface After setting is complete the SD23 video camera starts reverse counting timer when you press the Photo key once When the preset time is reached the SD23 video camera takes a picture 5 Recording an Audio File To record an audio file perform the following operations Press the M key on the video camera setup interface choose Exe and then press OK to display the video and audio options Press the lt or gt key and choose amp for audio only and press OK again Press the M key to exit the setup interface The system gets ready for audio recording Press the Video key to start recording an audio file At this time the green indicator blinks slowly The video camera also displays the audio recording symbol on the TFT screen and starts counting time In addition the recording duration is correctly displayed on the LCD segment screen Press the Stop key to save and stop the currently recorded audio file At this time the green indicator on the front side blinks slowly The video camera restores to the preview state for audio recording The recording duration also disappears on the LCD segment screen After audio recording is complete press the M key
14. battery ormat for video recording 1100mAh backup battery in NTSC system 720P 1280x720P 60 frames second 650 mA 37V M 720P 1 280x7 20P 30 frames second nene A mm WVGA 848x480P 120 frames second COMMNUOUS alon ie 4 hours Max WVGA 848x480P 60 frames second video recording Continuous duration for 7 hours Max Video recording Recording video files in MOV format audio recording Standby duration 200 hours Max Audio recording Recording audio files in WAV format l 8M 12M 16M JPEG images available Recharging duration Approximately 3 hours for shooting resolution Capacity of the Micro SD Up to 64 GB secure digital high USB interface USB2 0 card capacity SDHC Operating humidity 1596 8596 RH 10 meter Max o E Windows XP Vistaor Above Windows Storage temperature 20 C 60 C Operating system 7 or MacOS prre 80 g without the screen Operating temperature 10 C 50 C Weight 105 g with the screen 30 minutes per segment in normal File storage a Dimensions W x H x D 60 mm x 52 mm x 42 mm 15 minutes per segment in cyclic recording mode Precautions for the Waterproof housing aee com The waterproof housing is a precision component When using the waterproof housing adhere to the following precautions 1 2 3 4 5 6 Do not randomly remove or change the O ring key and lens cover Otherwise the waterproof performance deteriorates Do not put the waterproof h
15. deo camera formats the memory card rather than its memory m Recover factory setting This parameter restores all parameter settings to the factory settings After you set this parameter the system displays all the menu options in english Press the M key to display menu options Press the or gt key to display the System Setup menu Press the key and choose Language Then set the system in your desired language After resetting to the factory setting the system displays 01 01 2012 00 00 for the time n Ver This parameter only shows the version number of the software used on the video camera Note When selecting a state from a submenu press the M key for a backward operation and press OK for confirmation 13 Operations aee com 1 Insert a Micro SD card into the SD23 video camera Note Use a branded Micro SD card for example Transcend Class 10 memory card 2 Powering on the SD23 Video camera Turn the power switch to the ON position to power on the SD23 video camera At this time the red indicator is on and the SD23 video camera changes to the preview state Note a Ifthe battery power is low the lii symbol is displayed on the TFT screen together with a promot b If no Micro SD card is inserted no symbol is displayed in the bottom right corner of the TFT screen 3 Recording a Video In the preview state press the Video key to start video recording The video recording duration i
16. deo system for output on a TV set A black screen appears for two seconds during switchover between the NTSC and PAL systems and this situation is normal Note Before using the video camera select NTSC or PAL depending on your region After the video system is selected the light source frequency also changes to avoid image blinking during video recording f Contrast Set this parameter to Standard by default To improve the image effect during night shooting set this parameter to Enhanced g ISO sensitivity This parameter is set to Auto by default To improve the image effect during night shooting set this parameter to Low lux h Metering Set this parameter to Average by default to ensure the general exposure effect If the central area is dark but the surrounding area is bright set this parameter to Central Area to improve the imaging effect in the central dark area If the central area is bright but the surrounding area is dark set this parameter to Central Spot to improve the imaging effect for the surrounding dark area i Language Press the or gt key to choose your desired language j Date time You can adjust the date and time which are overlapped in the bottom right corner of a video or shooting file during video recording or shooting k Format Select Format to remove all the files Note If no memory card is inserted the video camera formats its built in memory If a memory card is inserted the vi
17. eo camera to a display device using an AV cable After being connected to a display device the SD23 video camera can still implement all its functions 10 Connecting the HDMI Output In the preview state connect the SD23 video camera to an HD display device using an HDMI patch cord After being connected to the HD display device the SD23 video camera can implement all its functions Note Incorrect removal of the HDMI patch cord may result in exceptions on the SD23 video camera After being restarted the SD23 video camera can restore to the normal state 11 a 12 Connecting the SD23 Video camera in USB Mode To connect the SD23 video camera in USB mode perform the following operations If no battery is provided for the SD23 video camera before delivery connect the SD23 video camera using a USB power adapter to implement all the functions The corresponding messages are displayed for operations on the LCD segment screen and the TFT screen In the power on state connect the SD23 video camera to a computer for accessing the data stored in its memory card and the Micro SD card The USB connection state icon is displayed on the LCD segment screen and the green indicator also blinks slowly Incorrect removal of the USB power adapter may result in exceptions on the SD23 video camera After being restarted the SD23 video camera can restore to the normal state Prompt Tones upon Operations The SD23 video camera can generate various pr
18. et system parameters a Prompt tone Set this parameter to ON to enable the tick tone or OFF to mute the tick tone Note This parameter cannot be set to mute the prompt tones for shooting and video recording Instead this parameter can only be set to mute the tone generated upon pressing a key on the TFT screen and no operation prompt tones b Status indicator After choosing the required menu set this parameter to ON turning on the status indicator or OFF turning off the status indicator By default set this parameter to ON c Video content loop When this parameter is set to ON a recorded video file is automatically saved once by segment every 15 minutes When this parameter is set to OFF a recorded video file is automatically saved once by segment every 30 minutes d Auto to standby Set this parameter to OFF 2 mins 5 mins or 10 mins You can select the time for automatic standby After presetting the time the system starts counting time when there is no task or operation When the preset time is 12 aee com reached the SD23 video camera disables the input output and enters standby mode During time counting the system restarts counting time if any tasks or operations are carried out During the standby period the SD23 video camera starts working if the Video Photo or Stop key is pressed In factory setting this parameter is set to OFF e TV output system Set this parameter to NTSC or PAL You can set the vi
19. ey is released the memory card is full or the battery power is low e Timed shooting Select the reverse counting time for auto shooting This parameter can be set to OFF 3s 5s or 10s and choose Timed Shooting and press the M key to return to the preview state Then press the Photo key to start reverse counting timer When the preset time is reached the auto shooting indicator blinks and the camera takes a picture To restore to other shooting modes set Timed Shooting to OFF Otherwise the camera maintains in timed shooting mode f Display time In the preview state press the M key On the setup interface choose Display Time If you set this parameter to ON in advance the camera automatically records the date and time during shooting and displays them in the bottom lower corner of the photo If you set this parameter to OFF in advance the camera does not display the date and time during shooting The display time function is unavailable for photo shooting in 1080i WVGA 100fps and WVGA 120fps modes Note 1 The timed shooting function and other shooting functions cannot be simultaneously enabled Set Timed shooting to OFF to restore to the other shooting modes Otherwise the camera is defaulted in timed shooting mode 2 In single shot mode the Auto cont capture parameter is automatically set to OFF 3 If the Auto cont capture parameter is set to 1s the time display function is unavailable 3 S
20. he SD23 video camera generates the tick tone twice Note a To check whether code pairing is successful use a wireless remote controller to control the SD23 video camera The control functions involve starting stopping video recording shooting waking up in standby mode and turning on off the laser indicator For each operation the SD23 video camera generates a tick tone indicating that the operation takes effect When you use the remote controller to stop video recording or turn off the laser indicator the SD23 video camera generates a tick tone twice b The remote controller must be used within a distance of up to 10 meters in an obstacle free and horizontal angle c In standby mode you can press the Video Photo or Stop key on the remote controller to start the SD23 video camera J0 aee com 8 Starting the SD23 Video camera in Standby Mode The SD23 video camera enters preview mode after power on If no task or operation is carried out within the preset standby time the system automatically enters the standby mode to save power To wake up the camera from standby state you can press the Video Photo or Stop key or press any key on the remote controller Note a Inthe standby state the system does not start when you press any key on the TFT screen b In the standby state no information is displayed on the LCD segment screen 9 Connecting the AV Output In the preview state connect the SD23 vid
21. hree seconds in different colors to show the current power Blinking green upon full power Blinking blue upon sufficient power Blinking red upon insufficient power Power 3 Recharging the Battery You can connect the standard power unit of the SD23 video camera to the USB recharging interface of the D23 battery or connect a computer to the USB recharging interface of the D23 battery by using a USB data cable for recharging as shown in the following figure This backup battery has automatic protection against overcharging and short circuit The red indicator light keeps flashing when charging the battery and the green indicator light is on when the battery is fully charged The battery can be charged for 500 times USB data cable During recharging the red indicator on the SD23 telecamera blinks but the red indicator on the D23 battery does not blink Note 1 Do not remove the backup battery randomly 2 If the SD23 video camera is not used for a long time recharge the battery every six months to extend the battery life 3 It takes about 2 hours to fully charge this backup battery by the charger 24 Power Supply aee com The SD23 video camera uses a power unit certified by the following authorities UL mark C TICK mark CE mark S GS mark UL U S Power Australia Power C E U Power G Germany Power S Certification Certificatation Certification Certification Soret CCC mark LA PS
22. ic high speed video recording with light and shade environment transient response Detects light in three modes to meet exposure requirements in different scenarios Provides night shooting mode with contrast and ISO enhancements improving the clearness and sharpness of night scenarios Provides compact and fashionable design Provides HDMI and AV output interfaces for easy connecting to HD monitor or TV set to view record files Records video programs in MOV format to facilitate playback on a PC and uploading to video sharing websites 3 aee com Provide high color fidelity to present more clear and natural video pictures A wireless remote controller can remotely control the SD23 video camera for video recording stopping and shooting Provides a unique code paring function to avoid interferences from other remote controllers Supports playback deleting files and other operations on the local video camera Supports 1 4 1 2 2 4 8 and 16X fast forwarding fast rewinding and playback Supports RTC time settings and time overlapping Supports USB 2 0 Provides a built in microphone for high quality recording Supports connecting to an external microphone special purpose microphone only Provides a 1 4 inch general purpose interface to facilitate extension of accessories Provides multiple types of sport accessories for sport recording Provides shockproof features to withstand mild drop or knock Provides an IP68 wa
23. ith an image resolution of 4608 x 3456 Four photo shooting modes are available for the video camera a single shot the default mode In the preview state press the Photo key once to take a picture while the system generates a click tone The green indicator on the front side of the video camera also blinks once the shooting icon on the LCD segment screen blinks once and the video camera restores to the preview state Fast shot On the camera setup interface press the or key and choose Fast shot Press OK to display the interface Press the gt key and choose 3 p s or 6p s or 10 p s photo second Press OK again to exit the interface Press the M key to exit the camera setup interface After setting is complete the SD23 video camera continuously takes three pictures or six pictures or ten pictures when you press the Photo key once 15 aee com c Auto cont capture On the camera setup interface press the key and choose Auto Cont Capture Press OK to set the time interval for continuous shooting to OFF 0 5s 1s 2s 3s 5s 10s 20s 30s or 60s Press the gt key to set the time interval Press the M key to exit the setup interface At this time if you press the Photo key the SD23 video camera takes a picture at each interval until you press the Stop key to cancel shooting d Timed shooting On the camera setup interface press the key and choose Timed
24. n the LCD segment screen and the video camera restores to the state for audio recording During audio recording the video camera responds only to the Stop Power off keys When the laser SYNC video function is enabled the laser icon is displayed in the upper left corner of the preview screen indicating that the video camera is in such a shooting mode The laser will be turned when starting video recording and turned off when stopping video recording When the pre video and audio video functions are both enabled press the Video key to automatically record the time in reverse counting mode press the Video key again the last a few seconds of the pre recorded video will be saved as the starting part of the video recording file zooming is not required in WVGA 100fps and WVGA 120fps video recording mode 2 Set camera parameters a b Resolution Select the required resolution for shooting You can set this parameter to 8 0M 12 0M or 16 0M Single shot When the camera is set to the single key shooting mode one picture is captured when the Photo key is pressed once Fast shot three fast shot modes are available 3 p s 6p s and 10 p s photo second Select the desired mode and press Photo key the camera will take pictures for one second with prompt tones 11 aee com d Auto cont capture Pictures is captured at intervals of 0 5s 1s 2s 3s 5s 10s 20s 30s or 60s until the Stop k
25. n the video camera is powered on The more bars the power indicator has the more power the battery has Note When the video camera is in the standby or power off state the power icon is not displayed F USB connection mode The lt 2 USB mode icon indicates whether the video camera has been connected to a computer When the video camera is powered on and connected to a computer this icon is lit with the green indicator on the left side blinking slowly When the video camera is not connected to a computer this icon is not displayed G TF card capacity indication The 8 TF card capacity icon is displayed in the bottom right corner indicating the available space of the TF card The more bars the power indicator has the more free space you have If the TF card is full the green indicator on the left side is constantly on At this time on the TFT screen you can find the following information A Working mode The W4 Video recording symbol is displayed in the upper left corner indicating that the video camera is ready for video recording aee com Battery capacity The B battery power symbol is displayed in the upper left corner indicating the battery level Video resolution The resolution icon in the bottom left corner indicates the current video recording resolution Available storage capacity If a memory card is available upon power on of the video camera the EQ free space of the memory card icon is dis
26. ompt tones upon operations In normal cases the SD23 video camera generates a tick tone indicating that the operation is valid when you press the Video or Photo key once 2 1 aee com b Upon stopping video recording the SD23 video camera generates a tick tone twice indicating that the video recording operation stops c If code pairing is successful upon a power on operation the SD23 video camera generates a tick tone twice indicating that the code pairing operation is successful d During video recording the SD23 video camera does not generate a tick tone when you press the Photo key e When any operations are performed on the TFT screen you can enable or disable the function for generating a tone Specifically press the M key when the SD23 video camera is in the preview state Then press the lt or gt key to display the Setup menu Press the or key and select Prompt tone f During video recording the SD23 video camera generates a tick tone twice indicating that the video recording operation stops when you press the Stop key on the remote controller once g During video recording no prompt tone is generated by the SD23 video camera or by the speaker on the TFT screen when you press the Photo key on the remote controller once h In the standby state the SD23 video camera generates a tick tone twice indicating that the main system starts when you press a key on the remote controller 13 Lase
27. ousing in a place where corrosive gases are easily generated due to strong acid or alkali Do not make the waterproof housing in contact with chemical or corrosive objects such as strong acid or alkali Do not put the waterproof housing in a place where temperature is high 50 C or low 10 C for a long time to avoid deformation Do not expose the SD23 video camera to sunshine for a long time to avoid deterioration of the waterproof performance Before use ensure that the O ring is intact the seal is litter free the housing is fully sealed and the buckle is tight After using the housing in sea water wash it using fresh water clean it and dry it in a cool place Precautions for the 3M Dual side Sponge Rubber When using the 3M dual side sponge rubber adhere to the following precautions ds Before fixing the 3M dual side sponge rubber select a curved or flat surface to ensure proper contact between the sponge rubber and the curved or flat surface 2 Before using the 3M dual side sponge rubber clean the surface where the sponge rubber is attached 3 Before attaching the 3M dual side sponge rubber heat the surface of the sponge rubber using an electric blower especially in a place where temperature Is lower than 20 C Notice When using the SD23 video camera pay attention to the following notice information 1 During continuous use the body temperature of the SD23 video camera increases This situation is normal 2 If the
28. played in the bottom right corner E There is no response for lt and gt keys in the preview state F When using the supplied power supply or USB cable to recharge the battery the Working recharging red indicator on the top of the video camera blinks slowly The red indicator will be constantly on upon full recharging The recharging time lasts for about three hours Note Before using the video camera check whether the battery has sufficient power If the power level is low use the power adapter supplied with the video camera or USB cable to recharge the battery The Working recharging red indicator blinks slowly during the recharging Upon full recharging the red indicator is constantly on and the 9 battery power symbol is displayed on the TFT screen una 2 Formatting the Micro SD card The Micro SD card must be a high speed card Before video audio recording and shooting pictures format the Micro SD card on the SD23 video camera If a Micro SD card has been used on other devices it should also be formatted on the SD23 video camera for normal use Note Before formatting make sure the files in the memory and Micro SD card are not needed Even the locked files on the video camera can be removed in formatting 3 Setting the data and time To set the date and time perform the following operations n the preview mode under power on state press the M key to display the menu interface Press gt
29. r Indicators The SD23 video camera provides laser indicators for warning operations a After the SD23 video camera is powered on the laser indicator is turned on when you press and hold the Video key for three seconds regardless of the working state b Ifthe laser indicator is on it will be turned off when you press and hold the Video key for three seconds c Inthe standby state you can also turn on or off the laser indicator d You can use a wireless remote controller to turn on or off the laser indicator Note Pressing the Video key for three seconds to turn on or off the laser indicator does not affect the setting of the Laser SYNC video parameter in Parameter Settings 14 Turning On Off the TFT Screen a After the SD23 video camera is powered on you can press and hold the Photo key for three seconds to turn on or off the TFT screen b The Photo key on the remote controller does not provide the function for turning on or off the TFT screen 2225 Storage and Play of a File 1 Connecting a USB Data Cable aee com After video recording is complete you can copy the recorded images to a computer for play by using a USB data cable You can also remove the Micro SD card from the SD23 video camera and access the image data by using a sensor The Media Player software is preferred for playing a file Computer USB interface USB data cable TV set or monitor 3 AV interface
30. re using the SD23 video camera complete the following preparations D Power on the SD23 video camera and check the power level Turn the power switch to the ON position to initiate the system After the red indicator is on the corresponding symbols on the LCD screen turns on and then the system enters the preview state On the LCD segment screen you can find the following information A A wm Recording mode The current recording mode is displayed on the LCD segmen screen The icon indicates the video mode whereas the icon amp indicates audio mode B Photo mode The II shooting icon is displayed on the screen This icon blinks once for each shooting C Power symbol The power supply icon is displayed in the upper right corner When the system is working this icon is constantly on If this icon disappears it indicates the SD23 video camera is in power off or standby state D Video recording duration In the medium row of the LCD segmen screen displays the duration of the current recording video for example 005 20 In the preview state press the Video key once to display the duration of the video recording and press the Stop key once to hide the duration Note The duration for video recording on the LCD segment screen is synchronously displayed with that on the TFT screen E Battery capacity indication The a battery capacity icon is displayed in the bottom left corner This icon indicates the battery level whe
31. ress the M key to enter the video recording setup interface choose Auto video and set the count down time before the automatic video recording The available options are OFF 5 s 10 s or 20s 180 photo rollover In the preview state press the M key to enter the video recording setup interface and choose 180 Photo Rollover This function allows you to shoot photos from any angle The 180 photo rollover function is unavailable for video recording in WVGA 100fps and WVGA 120fps modes E aee com Display time In the preview state press the M key to enter the video recording setup interface choose DISPLAY TIME If you set this parameter to ON the video camera automatically records the date and time during video recording and displays them in the bottom right corner of the screen If you set this parameter to OFF the video camera does not display the date and time during video recording The display time function is unavailable for video recording in 1080i WVGA 100fps and WVGA 120fps modes Note a e In audio recording mode press the Video key once to start audio recording The audio recording duration is displayed in the upper right corner of the TFT screen and the green indicator blinks slowly Press the Stop key to stop and store the currently recorded audio file In such a situation the green indicator is off and the red indicator is constantly on the operation prompt is displayed o
32. rges the battery in USB mode Accessories are available to facilitate shooting at any time and place Multiple patents of invention and technology are integrated in the SD23 video camera Dispose of properly Recycle it for a greener earth mmm Features aee com The SD23 video camera has the following features Provides 175 ultra wide angel f 2 8 lens Provides a special purpose HD lens which supports 1080P 1080i 960P and 720P HD video recording Takes 16M pixels pictures in 4608x3456 resolution Performs 10X digital zooming Performs shooting in multiple modes such as single key capturing and automatically continuous capturing Provides unique fast shot feature up to 10 photos per second Provides an independent voice recording function for long time voice recording Provides the remote control function Provides the 180 photo rollover function Connects to an external TFT screen to view the video recording and playback Provides better video effects in multiple video output modes NTSC system 1080P 1920x1080P 30 frames second 10801 1920x1080i 60 frames second 960P 1280x960P 30 frames second 720P 1280x720P 60 frames second 720P 1280x720P 30 frames second WVGA 848x480P 120 frames second WVGA 848x480P 60 frames second Detects power level of the battery and free capacity of the memory card Supports external T flash TF cards for storage up to 64 GB capacity Performs dynam
33. s displayed in the upper right part of the TFT screen The Video Audio indicator green and the Video Photo indicator red on the top of the video camera blink slowly The recording duration is correctly displayed on the LCD segment screen During video recording the video camera responds only to operations for the zoom out and zoom in keys Press the Stop key once to stop and save the currently recorded video file and the video indicator green on the front side is off The video camera restores to the preview state The recording duration disappears on the LCD segment screen Note a During video recording turn the power switch to the OFF position to power off the video camera after saving the currently recorded file b During video recording if the battery power runs low the system saves the currently recorded file and enters standby mode displaying a prompt of Low battery on the TFT screen until the video camera is powered off c During video recording if the Micro SD card is full the system saves the currently recorded file The system also displays a message Card full on the TFT screen indicating that the Micro SD card is full In addition the duration for video recording stops on the LCD segment screen and the system restores to the preview state d In cyclic recording mode the system automatically saves a file every 15 minutes The cyclic recording function and the pre video function cannot be simultaneou
34. sly enabled e If the D23 backup battery is provided and fully recharged the video camera can continuously record video programs for about four hours and record audio programs for about seven hours f In WVGA 100 and WVGA 120 modes the video camera does not support the time display zooming and 180 photo 14 aee com rollover functions In 1080i 50 and 1080i 60 modes the video camera does not support the time display function In audio recording mode the volume cannot be adjusted by pressing the or key In playback however the volume can adjusted by pressing the or key If the video camera provides a TFT screen and is in the preview state after using a HDMI patch cord to connect the video camera to a HD display device you can perform basic operations for the video camera on the HD display device These basic operations however cannot be performed if no TFT screen is available on the video camera 4 Taking a Picture Before taking a picture perform the following operations to set the image resolution Press the M key to display the setup interface Press the gt key to display the camera setup interface liza Press the or key and choose Image Resolution Press OK to display the resolution setup menu You can set the resolution to any of the following three modes 8M with an image resolution of 3200 x 2400 12M with an image resolution of 4096 x 3072 16M w
35. teristics Ultra small size and integrated structure User friendly interfaces Easy operations Hand free shooting to facilitate shooting of real scenarios at any time and place Superior recording performance thanks to dynamic HD shooting technologies providing you with exciting video shooting experience This manual describes how to install and use the SD23 video camera It also provides information about use operations installation precautions and technical specifications of the SD23 video camera Before using the SD23 video camera read and understand this manual carefully and keep it properly for future use Designed to meet the professional requirements AEE SD23 video camera will serve you in a long term Warranty aee com This product has been certified by certification bodies for compliance with related safety regulations and specifications issued by the federal communications commission FCC and council of Europe CE Overview The SD23 video camera is a compact high end HD digital camera intended for professional applications It provides the following functions Performs industry leading HD digital shooting Stores voice data Displays images in real time Performs video recording Takes pictures Displays time Provides laser indication Performs wireless remote control Performs 10X digital zooming Connects to an external special purpose microphone Performs USB 2 0 high speed data transmission Recha
36. terproof housing withstanding a diving depth of 100 meters and two types of rear cover deigns Provides automatic standby for power saving and supports automatic saving of audio and video data Structure aee com 1415 16 17 18 19 20 21 o AU N 1 TFT screen 2 Menu key 3 Upward key 4 Leftward key 5 Downward key 6 Playback key 7 OK key 8 TFT screen lock knob 9 Wrist strap hole 13 AV out Audio in 14 Record key 15 Video Audio indicator Green Use and Installation aee com 1 Installing the SD23 Video camera The SD23 video camera can be hand held or used with hand free accessories It can be installed at your desired place or after being equipped with a waterproof housing placed in water for shooting underwater sceneries How to install the SD23 video camera 1 Assemble the TFT screen onto the video camera 2 Put the SD23 video camera into the waterproof housing TFT screen video camera Assemble the TFT screen video camera Waterproof Put the video camera Into onto the video camera housing the waterproof housing To remove the TFT screen press the PUSH snap button and then remove it 2 Installing the Remote Controller The SD23 video camera is equipped with an independent remote controller which can be placed at different positions depending on the accessories 2 Back clip 3 Binding strap optional Preparations aee com Befo
Download Pdf Manuals
Related Search