Brugervejledning CafйCino Pro 6 Shake - Expert-CM
Contents
1. the arrow must point towards the flat part of the shaft and the blade must be pressed over the A D shaft till it clicks Note Beware J Ta HE not to damage the white teflon mE ir ry O seal It only may be cleaned with E a soft brush 8 Empty and wash drip tray H and mesh T freely forth and back on the LU IA nal sharft Note If the whipper blade by CHE O is dismounted please see to 4 I d it that it is re mounted correctly paa ED N TI SE 2 8 Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III 9 Wash cabinet door side glass V fancy leg X whipper area and dispensing area Use a light detergent solution and hot water 10 Re mount whipper houses D and ingredient funnels B The funnels must be completely dry before re mounting see instruction on the inside of the door 11 Switch on the coffee brewer 12 Flush the brewing system a Place a pot under the dispensing spouts b Press the Service Switch L on the inside of the door the display will show SERVIC c Press CLEAN d W2. 12 EEA fa Motta a RA 13 Decaf RR RE ccc 13 Sn 14 Setting programming ot the coffee brewer A A QU MR SQUE 15 DU a e dt dto 15 A anna 16 Adjusting the individual selectionsi a a bia 16 O a e Ra A eter ue eee 17 POETS S oorr RR IRIS SISI 17 Direct carafe selection juillet 18 Riolo 18 Carate SIZES ereis CT 19 Ter THHODOTS E a Do Uu ena cM RR 20 Adjusting blocked drinks in timer function 3 sss 22 Adjustins tim format s nore er cC 23 Adjusting the active recipe Versioni arri Lio artt 23 Service functio fe RARE CARR DRDS RP RD n EOE a OR boar dae PER DR NESES 24 Reading o t ilie COUDtets oc otc i Io AS SS AS itu oti la Eu 24 ExasdDle DOUTIBES s oo acide tecto tte EE RAR aosta 24 hi snnpAUDc M 25 Reading out the not erasable counters 1 25 Printout of THE COUMIETS issos iaia 26 Print out of the setting of the coffee brewer ausencia AR es hem eR 26 Product Weighing C ia a SEE EA aE RI 27 Maintenance uu aqua P 27 brain cibum ia 28 Preventive Maintenance eee i eee ti 29 AAA PO 30 Connection Chart San Remo Classico II eee 31 Users manual San Remo Classico III Operation of the SCANOMAT Coffee Brewer The Scanomat coffee and coffee speciality brewers are high technology brewers whic
3. Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III Adjusting time format The coffee brewer can be set to run with 24 hour format or 12 hour format Am Pm When all 5 programmable timers have been adjusted as described above the display will show scanomat scanomat a Press and to select between the 2 functions b Press to accept the new value Adjusting the active recipe version a Press while the SERVICE program is active The display will show scanomat 1 being the currently active recipe version c Press and to change the active recipe version d Press to accept the new value There must be a recipe version programmed in the selected version if the coffee brewer is to work with this setting Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 23 Tel 445 49 18 18 00 Fax 445 49 18 01 18 Users manual San Remo Classico III Service functions All functions in this section requires the coffee brewers SERVICE program is active This is activated by pressing the key positioned on the inside of the door of the coffee brewer The display will show scanomat ON Note The coffee brewer can be set up to automatically leave the SERVICE program if no key has been activated for a period of 15 seconds The coffee brewer can be set up in a way that the key is not active In thi
4. 18 Users manual San Remo Classico III 3 As the products need to be brought forward to the end of the augers before a correct dosage can be obtained the following test procedure is recommended a Place a carafe under the outlet s b Activate all the different selections one by one to make sure that all product augers have been active The coffee brewer is now ready for use Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 1 1 Tel 445 49 18 18 00 Fax 445 49 18 01 18 Users manual San Remo Classico III Normal use Brewing cups During normal use a cup is dispensed by placing a cup or a mug under the outlet spout and press the appropriate selection key If the coffee brewer is equipped with more than one outlet spout there will be an indication showing which selection goes to which spout Pre selections Brewing carafes When brewing carafes first select the desired size by pressing a or a The display will show scanomat ON Tu L4 Pressing a selection key will now cause the dispensing of the number of cups programmed for the selected carafe size Pressing will cause the coffee brewer to stop the carafe brew after completing the ongoing cup The pre selection carafe is cancelled if i is pressed The pre selection carafe is cancelled automatically after 15 seconds if no selection key is pressed The pre selection carafe is cancelled automatically after the
5. 45 49 18 01 18 WATER VALVE Users manual San Remo Classico III Temperature display Coffee brewers with only hot water When the heating element is active there will be a flashing H in front of the temperature Coffee brewers with only ice water When the cooling compressor is active there will be a flashing C in front of the temperature Coffee brewers with as well hot as ice water When the hot water temperature is on the display there will be a H in front of it If the heating element is active the H will be flashing When the ice water temperature is on the display there will be a C in front of it If the cooling compressor is active the C will be flashing Will be active if the water tank is not completely full In this situation pressing a selection key will cause the coffee brewer to take in water thereby filling the tank completely before starting the brew If the tank can not be filled within 5 seconds the brew will not be made Will be flashing if the level in the water tank is critically low In this situation no drinks can be made and the heating element will be disabled Pressing a selection key will cause the coffee brewer to attempt to take in water for a maximum time of 3 minutes If this is not enough to fill the tank the key press must be repeated THERMO METER Will be flashing if the temperature in the hot water tank is too low No drinks can be CUP CARAFFE selected in th
6. ON 21 being the current strength for product 1 b Press and to adjust the amount for this product up and down respectively The range for each product is O through 31 The size for each step for each product can be seen in the print Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 1 7 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III out of the recipes Press to accept the new value and the program will proceed to the next adjustable product until no more in this drink Direct carafe selection It is possible to program a selection key to be a direct carafe selection This means that pressing this selection key will cause the coffee brewer to dispense a number of cups of the selection in question This function is optional After adjusting the strength s the display will show scanomat ON CUPS 6 cups being the currently selected carafe size a Press and to adjust the number of cups up and down respectively If the number of cups is set to O or 1 pressing the selection key will cause the coffee brewer to make only one cup In this case the display will show scanomat b Press to accept the new value Price If the coffee brewer is set to run with a payment or accounting system the display will after making the above mentioned adjustments show scanomat ON 8 75 being the current price for this selection 1 8 Scanomat A S Vib
7. The display will show the following while the speaker will beep continuously scanomat The code is 6 keys that must be activated with a maximum of second pause between 2 keys Pressing To will return to the SERVICE program If the correct code is entered the counters will be reset and the display will show scanomat ON CUPS Reading out the not erasable counters With the erasable counters in the display press 000 and the display will now show the total counter for the not erasable counters The symbol CUPS will be flashing to indicate that it is the not erasable counters Pressing the individual selection keys will display the not erasable counters for these Pressing SOP will return to the SERVICE program Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 D 5 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III Print out of the counters It is possible to print out the cup counters of the coffee brewer by means of a HP82240 printer using the infrared connection on the inside of the door of the coffee brewer a Position the printer in a place where it can see the infrared window on the inside of the door Maximum distance approximately 50 cm b While the SERVICE program is active press STEP keep this pressed and press simultaneously and the display will show scanomat ON I VI and the counters of the coffee brewer will be pr
8. brewers with payment or accounting systems 3 To automatically lock out selected drinks in programmed periods The coffee brewer has 5 programmable timer which can be adjusted as follows a Press while the SERVICE program is active The display will show scanomat ON b Press fe and the display will show the actual time with the minutes flashing C Press and to adjust these up and down respectively d Press to accept this value seconds will now be set to 0 The display will now show the time with the hours flashing e Press and to adjust these up and down respectively f Press to accept this value The display will now show the starting time for the first programmable timer with the minutes flashing scanomat 2 0 Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III g This time can now be adjusted using o and as described in point c to f After pressing the end time for this programmable timer with the minutes flashing will be on the display scanomat OFF h This time can now be adjusted using o and as described in point c to f After pressing the function for this will be on the display There are 3 different timer functions available scanomat scanomat OFF 1 Press and to select between the 3 functions and disabl Disabl Means that this timer is not act
9. brewing Strong Pressing will activate the pre selection STRONG The display will show scanomat ON STRONG after 2 times pressing 1 p Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 445 49 18 18 00 Fax 445 49 18 01 18 Users manual San Remo Classico III The following drink will now be made 2 steps stronger than normal The function STRONG is in 5 steps Each press on will increase the value by 1 which will be indicated in the display The pre selection STRONG is cancelled if is pressed The pre selection STRONG is cancelled automatically after 15 seconds if no selection key is pressed The pre selection STRONG is cancelled automatically after the brewing Light UGH o l i i Pressing will activate the pre selection LIGHT mild The display will show scanomat ON LIGHT after 3 times pressing The following drink will now be made 3 steps lighter than normal The function LIGHT in 5 steps Each press on UGH will increase the value by 1 which will be indicated in the display The pre selection LIGHT is cancelled if is pressed The pre selection LIGHT is cancelled automatically after 15 seconds if no selection key is pressed The pre selection LIGHT is cancelled automatically after the brewing Regarding the pre selections STRONG and LIGHT with respect to mixed drinks only the taste dominating product will be adjusted In for CAPPUCCINO only th
10. the keyboard of the coffee brewer switch off the light in the display and reduce the temperature in the hot water tank by approximately 25 C The latter is dependant on the setting of the actual machine This way of switching the coffee brewer off has the advantage that it will be ready for use as soon as it is switched on again ON With the SERVICE program active press and the display will show scanomat OFF Lights off The coffee brewer can be switched on again by activating the SREVICE program and pressing OFF Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 1 5 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III Temperature The hot water temperature of the coffee brewer can be adjusted as follows a Press while the SERVICE program is active The display will show scanomat ON b Press and the display will show the currently selected temperature Press and to adjust this up and down respectively Press to accept the new value c The program will now show the currently selected temperature CELCIUS or FAHRENHEIT d Press to change this setting or to skip this adjustment e Press to accept the new value Note The possibility to adjust temperature is optional Adjusting the individual selections The individual selections can be adjusted with respect to cup size and maybe strength direct carafe size and price These adjustmen
11. Remo Classico III Initial start up of the coffee brewer 1 Set the On Off switch in the brewing region to On 1 There will be light in the display of the coffee brewer When the coffee brewer has been connected to power and water it will for safety reasons not automatically take in water The display will show a flashing 4 a flashing i and a low temperature 2 Activate the SERVICE program by pressing fev which is placed on the inside of the door scanomat ON The display shows SERVICE A tc a ULI ae w uy ON OFF SCANOMAT 1 Press and the coffee brewer will start taking in water for a maximum of 3 minutes If the water supply pressure is low this might not be enough to fill the water tank This will be indicated by the flashing 3 on the display Press to repeat the process When the water tank is full the heating element will be activated and heat the water to the programmed temperature When this is reached the coffee brewer is ready for test 2 Fill the ingredient bins of the coffee brewer 1 0 Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 45 49 18 18 00 Fax 45 49 18 01
12. al Drawing A Ingredient canister B Ingredient funnel C Mixer bowl D Whipper house E Outlet hose F Outlet holder G Whipper tray H Drip tray I Main switch J Quality Key reader optional K Cover plate L Service switch M Canister lid optional N Mixer lid O Whipper blade R Outlet tube S Jet nozzle optional T Mesh U Levelling legs V Side glass X Fancy leg Z Ingred can Top Users manual San Remo Classico III N AC D f AM o a o sa IAN 7 AA NE e Reset botton Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 445 49 18 18 00 Fax 445 49 18 01 18 3 Users manual San Remo Classico III Installation Service and repair is only to be carried out by service engineers educated by Scanomat The coffee brewer is to be secured additionally in accordance with regulations The coffee brewer must be earth connected yellow green conductor Note If the supply cable power cord has been damaged please note that only a maintenance engineer recommen
13. ation for some time Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 20 Tel 445 49 18 18 00 Fax 445 49 18 01 18 Users manual San Remo Classico III Trouble Shooting Problem No operation at all Coffee brewer only dispenses water A water tap symbol flashes in the display A thermometer appears in the display Clogged mixing bowl or whipper Dripping from outlet spouts Dripping from the overflow Possible Cause Main switch I might be off No ingredients in the canisters Make sure the augers are turning when operating Check that the water supply has been connected Activate flush programme Press the button on the back side of the coffee brewer Dismount and clean the mixing units see Daily Maintenance Activate flush programme a couple of times Activate flush programme a couple at the bottom of the coffee of times brewer 3 0 Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III Connection Chart San Remo Classico III Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 3 1 Tel 445 49 18 18 00 Fax 445 49 18 01 18
14. ded by the manufacturer is to renew it as special tools are required Earth conductor yellow green Neutral conductor blue Phase brown black Note Place the coffee brewer on a stable table adjust the levelling feet until the brewer is level from front to back and side to side Be certain all four levelling feet are in contact with the table to prevent rocking of the brewer If there is a danger of the brewer falling down from the table it must be bolted down to the table top unscrew the levelling feet and fasten by screwing through the table top Note The coffee brewer require ventilation Therefore there must be a minimum of 50 mm from the back side of the brewer to the wall The grating must be inspected frequently and vacuum cleaned If the installation site environment is especially dusty there must be vacuum cleaned each month Note Before connecting the coffee brewer draw off some buckets of water by means of the hose to clean the pipes and to avoid a disagreeable taste This procedure is also recommended when the brewer has not been operating for some time Note We recommend that the brewer is switched on permanently due to the ventilation system among others 4 Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 445 49 18 18 00 Fax 445 49 18 01 18 Users manual San Remo Classico III Water Connection When the water supply is being established please make sure that the coffee bre
15. e All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III a Press and to adjust the price up and down respectively The steps for the price will normally the smallest available coin If the price is set to O the coffee brewer will dispense this selection for free b Press to accept the new value All adjustments concerning this selection is now done Carafe sizes a Press while the SERVICE program is active The display will show scanomat 12 being the current number of cups for this carafe c Press and to adjust the number of cups up and down respectively The carafe size can be adjusted between O and 200 cups If the size is set to O cups nothing will be dispensed with this carafe as pre selection Note it is possible to set the size of the individual carafes freely thus enabling the small carafe to be bigger than the large one d Press to save the new value Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 1 9 Tel 445 49 18 18 00 Fax 445 49 18 01 18 Users manual San Remo Classico III Timer functions The coffee brewer is equipped with an internal watch This can be used for programming the coffee brewer to different timer controlled actions 1 To automatically switch off in programmed periods 2 To automatically dispense free drinks in programmed periods For coffee
16. e amount of coffee will be adjusted For further details of the influence of STRONG LIGHT on the individual selections refer to the print out of the recipes Decaf Pressing will activate the pre selection DECAF The display will show scanomat ON Jar Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 1 3 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III The following drinks will now be brewed of decaffeinated coffee in stead of normal This also goes for any mixed drinks containing a coffee product The pre selection DECAF is cancelled if TY is pressed The pre selection DEACF is cancelled automatically after 15 seconds if no selection key is pressed The pre selection DECAF is cancelled automatically after the brewing Note The coffee brewer must be equipped with a decaffeinated coffee to make this option available The individual selections in the recipes can be composed in a way not allowing the user to freely select between normal and decaffeinated coffee For further details on this refer to the print out of the recipes Cold Pressing will activate the pre selection COLD The display will show scanomat ON The following drink will now be made with cold water in stead of hot The pre selection COLD is cancelled if To is pressed The pre selection COLD is cancelled automatically after 15 seconds if no selection key is pressed The pr
17. e selection COLD is cancelled automatically after the brewing Note The coffee brewer must be equipped with a cold water system to make this option available The individual selections in the recipes can be composed in a way not allowing the user to freely select between cold an hot water For further details on this refer to the print out of the recipes 1 4 Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III Setting programming of the coffee brewer All functions in this section requires the coffee brewers SERVICE program is active This is activated by pressing the key positioned on the inside of the door of the coffee brewer The display will show scanomat Note The coffee brewer can be set up to automatically leave the SERVICE program if no key has been activated for a period of 15 seconds The coffee brewer can be set up in a way that the key is not active In this case the SERVICE program is activated by pressing a code on the keyboard This code is available from Your Scanomat dealer On Off There are two ways to turn the coffee brewer off 1 You can set the On Off switch in the brewing region to O This will cut the power to the control system of the coffee brewer thus turning this completely OFF ON 2 You can turn the coffee brewer of by means of the key on the keyboard This will disable
18. h by means of a micro processor controlled brew process dispense various first class quality coffee drinks Water is heated in the thermostatically controlled hot or cold water tank with automatic water inlet The water tank has built in overheaters and an overflow leading to the drip tray By means of an ingredient throw device the various instant products are led from the canisters to a brew chamber and here water is added If necessary the ingredients could be stirred mechanically in the brew chamber before the drink in question is led to the outlet spout It is possible to choose between cup or jug dispensing Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 1 Tel 445 49 18 18 00 Fax 445 49 18 01 18 Users manual San Remo Classico III Technical Specifications Power supply 230 VAC single phase with ground connection or 400 VAC 2 3 phases with neutral and ground connection Idle power consumption approx 20 watt Dimension Height 70 cm Width 52 cm Depth 45 cm Water tank Hot water tank capacity 7 litres Weight Gross 45 kg Nett 42 kg Water connection 2 6 Kp cm flow min 5 1 min Water temperature 5 12 C Environment Temperature 10 40 C humidity max 90 RH Shelves transportation Temperature min 0 C 2 Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Gener
19. hen the flush programme has been carried out press the Service Switch It is possible to stop the flush programme at any time just by pressing STOP 13 Fill the machine with ingredients for one day s consumption It is of the utmost importance that you observe this recommendation as ingredients easily absorb damp 14 Test the coffee brewer Preventive Maintenance The ingredient canisters are to be cleaned at fixed intervals depending on the performance of the machine and in which environment the machine is installed as well as the quality of the drinking water in the area 1 Use hot water with a mild soap solution 2 Empty the canisters 3 Remove remnants if any 4 Dismount the ingredient throw auger by pulling out the two snap locks thus it is possible to pull out the auger Rinse auger and ingredient canister in the hot water with mild soap solution Do not re install the ingredient canister and auger until they are completely dry 5 Re mount the ingredient canisters and fill up with ingredients for one day s consumption Please make sure that the canisters are completely dry before filling If the front glass need to be cleaned on the backside 1 Dismount the glass with a lift up 2 Wipe the glass carefully with a cloth and hot water 3 Re mount the glass by a lift down Note We recommend that water is drawn off the machine and replaced by fresh water after holidays or weekends when the brewer has not been in oper
20. inted out Selections with the counter value O will not be printed Pressing SOP at any point will interrupt the print out Print out of the setting of the coffee brewer It is possible to print out the whole settings of the coffee brewer by means of a HP82240 printer using the infrared connection on the inside of the door of the coffee brewer a Position the printer in a place where it can see the infrared window on the inside of the door Maximum distance approximately 50 cm b While the SERVICE program is active press STEP keep this pressed and press simultaneously and the display will show scanomat ON I BEI and the setting of the coffee brewer will be printed out Pressing at any point will interrupt the print out gt 6 Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III Product weighing It is possible to weigh the gram throw of the individual products in the individual selections This is done by activating a function where only products will be dispensed by activating a selection key no water or whipping This function is useful for controlling that the coffee brewer actually dispenses the desired amount of each product in the individual selections after adjusting the cup sizes and the strength s To make an easy collection of the products it is recommended that the mixer system is rem
21. is situation Will be flashing during brew Also used to indicate the size of the cup during adjusting this Will be on when a carafe is pre selected ADDITIONAL INFO Used during programming of timers MAGNETIC CARD Used during reading magnetic keys CREDIT KEY and QUALITY KEY Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 445 49 18 18 00 Fax 445 49 18 01 18 7 Users manual San Remo Classico III The keyboard of the coffee brewer Explanation of the individual keys CAPPUCCINO i da Selection key Pressing this when the coffee brewer is in normal operating state will O E E E amp 5 8 E amp 9 8 oo cause this to make a brew Carafe pre selection Pressing this will cause the following selection to made in a multiply according to setting of this carafe Will activate the pre selection STRONG This will make the following selection stronger than standard Will activate the pre selection LIGHT mild This will cause the following drink to be milder than standard Will activate the pre selection DECAF This will cause the following drink to be made with DECAF coffee in stead of normal During programming this key is used to increase values Will activate the pre selection COLD This will cause the following drink to be made with cold water in stead of hot During programming this key is used to decrease values The two above mentioned
22. ive Func 1 Means that the coffee brewer will switch off in the programmed period Func2 Means that the coffee brewer will dispense free drinks in this period for coffee brewers with payment or accounting system Func3 Means that the coffee brewer will lock out individual drinks in the programmed period Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 1 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III Adjusting blocked drinks in timer function 3 scanomat When the display shows the individual selections can be enabled locked in the following way a Press a selection key and the display will show the current status for this scanomat Means that the selection can be dispensed during the programmed period Means that the selection is locked during the programmed period b switching between he 2 functions is done by pressing 33 After completing the setting for all selections this can be verified by pressing the selection buttons one by one and then controlling the ON OFF symbol in the display c Press to accept the new settings for this programmable timer The coffee brewer will now proceed to the next programmable timer point h until all 5 timers have been programmed Pressing To at any point during the timer programming will interrupt this and only values that have been accepted with will be stored 9 2 Scanomat A S Vibe All 3
23. keys have during programming an automatic repeat function This means that keeping one of these pressed during adjusting a value this will change automatically Will display the watch of the coffee brewer Used to switch the coffee brewer on and off Used to read out information from the coffee brewer Used to confirm settings during programming of the coffee brewer Used to adjust the active recipe version of the coffee brewer Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 45 49 18 18 00 Fax 45 49 18 01 18 c Zi 3 5 E E 4 rri mj NOTE Users manual San Remo Classico III Used to interrupt an ongoing carafe brew an ongoing cleaning sequence or to stop a programming function Used during programming of the coffee brewer Activates the cleaning program of the coffee brewer Used during programming to select next value Used to activate deactivate the SERVICE program of the coffee brewer Not all keys mentioned here will be active in all coffee brewers For example the keys and 0 These will only be active 1f the coffee brewer is equipped with DECAF coffee and COLD water system respectively The availability of individual keys is also dependant on the customer related setting of the coffee brewer Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 9 Tel 445 49 18 18 00 Fax 445 49 18 01 18 Users manual San
24. oved during the process and the products can then easily be collected in a disposable cup a Press while the SERVICE program is active The display will show scanomat This indicates that the coffee brewer by pressing a selection key will dispense product number 1 for this drink If the drink in question is a mixed drink the product number can be adjusted up and down respectively by pressing and 000 Pressing a selection key will now cause the coffee brewer to dispense one portion of the product number in the display for this drink If nothing is dispensed it is because the product number is set higher than the number of products in this drink For accurate weighing it is recommended that at least 5 portions of each product is taken and then the average is calculated Pressing Yo will cause the coffee brewer to return to the SERVICE program Maintenance Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 27 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III Important To maintain sanitary conditions it is of the utmost importance that all components that are in contact with the drinks are kept clean Important Machines dispensing beverages and shakes must be manufactured installed and operated in a way that leaves absolutely no risk of pollution or other depreciation of the beverages and shakes According to 38 of regulation No 1000 of 27th November 1996 of
25. s case the SERVICE program is activated by pressing a code on the keyboard This code is available from Your Scanomat dealer Reading out the counters The coffee brewer will count all the drinks dispensed By carafe selections the number of cups for each carafe will be counted Reading out the counters is done as follows Press while the SERVCIE program is active and the display will show the total cup counter example scanomat Pressing the individual selection keys will display the individual counters for these __ 5 Pressing will return to the SERVICE program Erasable counters 2 4 Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III The coffee brewer may be equipped with dual counters In this case the one is Erasable and can be used for periodic accounting and the not erasable as total counter for the coffee brewer Reading out the erasable counters is done as described above by pressing 0 while the SERVICE is active and the display will show the total number of cups taken since the counter was last reset Pressing the individual selection keys will display the erasable counters for these Pressing will return to the SERVICE program Resetting counters Pressing while the erasable counters are on the display will activate the resetting of these To avoid accidental resetting a code is required
26. scanomat Pare Coffee User s manual Teprcaso Chocolate Capooonias San Remo Classico III English edition Re ordering No 2000393 Version nr 4 We are pleased that you have chosen a Scanomat Coffee Brewer Should you have any questions regarding the coffee brewer and the operation of it please do not hesitate to contact us We are convinced that you will be pleased with your choice Vibe All 3 e Postboks 131 e 2980 Kokkedal Telefon 49 18 18 00 e Telefax 49 18 01 18 Important Warning Please be aware of the danger of scalding in the dispensing area when dispensing the various hot drinks Warning Before cleaning servicing etc that require the opening of the front door the switch situated in the delivery area must be switched off The brewer has been switched off when the display light turns off and the blower stops Note Please be aware that the switch only disconnects control circuit not the power supply Contents Operation of the SCANOMAT Coffee Brewer eese eeesee eene enne eene tenter nenne 1 Technical Specifications igloo 2 General run aria ii 3 A NOS 4 The display of the COffee Dre ii ate dina 6 Th keyb ard of the coffee Dr Wer echte eode ca d nde pee lio ale 8 Dnitialstartup or the Cones DL vo EE 10 Normal Uses soo f e tesis Sa Go ea SS totae nado a D e 12 Brewing Id a M eie 12 A dtque i inet i codons cues tuti enne otis ha te aan 12 BENIN Canales role 12 Noc pd
27. the Danish Minister of Health Important Do not sink the coffee machine into water and do not use high pressure cleaner Note A high quality of the daily maintenance secures a high level of hygiene Daily Maintenance Caution Before starting the cleaning procedure make sure that the coffee brewer is switched off in order to avoid damages and injuries with hot water and rotating parts Make sure to switch off the machine on the main switch see point 1 on the General Drawing Please note that only the low voltage control circuit will be cut off the main voltage will not be cut off Rinse in hot water with a mild soap solution Switch off the main switch I of the coffee brewer Light and text in the display will disappear Dismount jet nozzle S and clean by means of the cleaning brush Clean outlet tubes R by means of the cleaning brush Dismount ingredient funnels B and wash in hot water with a mild soap solution dismount by lifting the hinges prse D 6 Dismount mixer bowls and whipper houses C and D by Sd RA eel a AN turning the whipper house D to i AV the right and pulling out Clean in E l hot water with a mild soap sol o ee gard ution A A 7 Note Beware only to dismount mu X the wipper blade if it s strictly N si necessary by means if there is dirt inside the silicone bellow og if the white teflon seal can t move M J Il
28. ts are a sequence in the program which means that You have to go through the first adjustments to reach the later If an adjustment should not be changed simply press when this is on the display and the program will proceed to the next adjustment in the sequence The Sequence of the adjustments is as follows Cup size Strength Direct carafe selection Price The adjustments in brackets are optional and will therefor not be available in all coffee brewers 1 6 Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III Cup size a Press while the SERVICE program is active The display will show scanomat b Press the key for the selection to be adjusted and the display will now show the current setting for this scanomat ON 14 being the current cup size c Press and to adjust this up and down respectively The size of one step is approximately 5 percent The range is from O through 31 Note If the cup size is set to 0 the selection will be locked d Press to accept the value and the program is now ready for adjusting strength Strength For mixed drinks it is possible to adjust the strength for the individual components The sequence of the product to be adjusted is the same as the sequence in the print out of the recipe a After adjusting the cup size the display will show scanomat
29. washer Coffeebrewer Waterpipe Pd x SS N Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 5 Tel 45 49 18 18 00 Fax 45 49 18 01 18 Users manual San Remo Classico III The display of the coffee brewer Additional information field _ Scanomat logo p scanomat Symbol for ON status ON OFF B Symbol for OFF status CUPS LEFT r Cup counter symbol STRONG LIGHT mq Strong drink selected yt d E Iu Iu Tu IX Ll ER Mild drink selected LINE CI e E Information field i Alarm for low temperature _ Alarm for low water level Cup symbol Spoon symbol Caraffe symbol EM EMEN a Magnetic card reader symbol Explanation of the individual symbols in the display ON Shows that the coffee brewer is in normal operating status The symbol is also used during programming of the timers OFF Shows that the coffee brewer has been switched off either by means of the keyboard or by one the programmable timers No drinks can be brewed CUPS Used when reading out the counters and when adjusting the carafe sizes STRONG Shows that a strong drink has been selected LIGHT Shows that a light mild drink has been selected INFORMATION Used to display temperature and functions which do not have fixed symbols FIELD 6 Scanomat A S Vibe All 3 Postboks 131 DK 2980 Kokkedal Copenhagen Reg nr 236 990 Tel 45 49 18 18 00 Fax
30. wer is not situated on the rear end of the water supply system to ensure continuous supply of fresh water see illustration below 1 Connect the coffee brewer to the cold water line which is equipped with an adjustable check valve 1 2 external screw thread G F Before connecting the brewer draw off some buckets of water to clean the pipes If the water quality is not top quality we recommend that a Scanomat water filter is mounted 2 Fasten the hose nipple C with screws to the connecting nipple B available in angle and straight version 3 The connecting nipple is to be screwed on to the valve at the bottom of the coffee brewer 4 Dirt filter E and nipple D are to be mounted 5 The flange of the hose C is to be mounted on the nipples D and B 6 Turnon the water and make sure that all joints and connections are tight Note If the water has a disagreeable taste when heated we recommend that the heated water is drawn off the brewer and let the brewer take in water anew After holidays or weekends when the brewer has not been in operation for some time the water will loose on quality therefore we recommend activating the clean programme perhaps a couple of times in order to get fresh water In special cases it could be necessary to empty the water tank completely by means of the drain hose and then let the brewer take in fresh water This operation could be repeated if necessary Scanomat Shower Sink Dish
Download Pdf Manuals
Related Search