LED 54AW - Bargeheights
Contents
1. Illuminance lux 5910 1038 Photometric data taken with all channels at full Due to varia tions in all LEDs these values should be considered approxi mate All LED sources experience a lowering of output and some color shift over time LED output varies with ambient operating temperatures 2010 Bargeheights Inc Page 13 5 CARE MAINTENANCE Your LED 54AW is designed for long life with minimal upkeep Since there are no lamps to replace maintenance is simple just keep your LED 54AW clean and dry Especially if you are in a dusty or haze filled environment there are some simple steps you can take to ensure a long happy life for your LED 54AW Keeping the lens area clean will ensure maximum light output Use glass cleaner on a soft cloth to wipe down the lens area and the outer enclosure of the LED 54AW whenever it gets dirty or dusty Always make sure the vent holes are kept clear The fan won t work if there s no place for the air to go Any other repair or maintenance should be performed by quali fied individuals only There are no user serviceable parts in the LED 54AW If you find your LED 54AW behaving strangely please feel free to contact us and we ll help with troubleshoot ing Returns While your LED 54AW was tested and working perfectly be fore it left to join your family sometimes things can happen If there s a problem and you need to return your LED 54AW don t worry It s easy Head over2. lt UP gt or lt DOWN gt to adjust the speed of strobe ASOC to AS ic SOLUA is Sound Control Color Cycle Mode The LED 54AW will respond by changing color to music or sounds via its onboard microphone SOUF is Sound Control Strobe Mode The LED 54AW will re spond by flashing to music or sounds via its onboard micro phone 2010 Bargeheights Inc Page 11 Master Slave Mode Up to 32 LED 54AWs may be connected via the 3 pin DMX con nections and controlled simultaneously without a DMX control ler by using Master Slave Mode In this mode you can set one fixture in the line to act as the master controller and up to 32 other fixtures can be connected and will mirror the operation of the Master e Select the desired standalone mode on the Master LED 54AW e Set the DMX address of each Slave fixture to AUT e Make sure the Master is the first fixture in the line connected via the 3 pin DMX connections on the rear of the LED 54AW Page 12 LED 54AW User Manual rev A Technical Specifications 100 250v 50 60Hz Qin h x 9in w x 12in 1 230mm h x 230mm w x 310mm Model Treo sam 54 x 1watt 18 Amber 36 White Dimensions Weight Ibs 5 0Ka Power Consumption S6 walls DMX Channels 4 channels Beam Spread 25 degrees Setup amp Addressing LED Menu display no dip switches Photometric Data 5 2 0m 4 0m 6 0m 8 0m Beam Diamet i 87m 1 77m 2 66m 3 54m 2 9 5 8 8 7 11 6
3. to www bargeheights com support and select the LED 54AW or send an email to support bargeheights com and we ll issue you an SR Service Request number Carefully pack your LED 54AW for shipping using the original box and packing material if possible Use a prepaid trackable shipping method such as UPS FedEx or USPS Priority Mail Please include the following information with your fixture so we can best help you 1 Your contact information Name Address Phone Number Email address 2 The SR issued to you 3 A brief description of the problem symptoms We will take a look at the fixture and at our discretion repair or replace the fixture Please note that we cannot be responsi ble for damage that takes place during shipping so make sure you pack the fixture well Page 14 LED 54AW User Manual rev A Shipping Damage Damage incurred in shipping is the responsibility of the shipper and must be reported to the shipping company immediately upon receipt of the items Claims must be made within seven 7 days of receipt Contact Us bargeheights inc www bargeheights com Support www bargeheights com support support bargeheights com 859 904 9444 2010 Bargeheights Inc Page 15
4. Mode Channel List 0 127 Overall Intensity 128 249 Strobe Slow gt Fast 250 255 Full Intensity 0 255 Amber Intensity 0 255 White 1 Intensity 0 255 White 2 Intensity Page 10 LED 54AW User Manual rev A Standalone Control Modes The LED 54AW has several standalone control modes that do not require a DMX control signal e Press lt MENU gt then press lt UP gt or lt DOWN gt until L or 3L or IL is displayed e Press lt ENTER gt to select and press lt UP gt or lt DOWN gt to adjust the level of that color Amber White 1 or White 2 e The LED 54AW will stay on in the selected color until the mode is changed FLAS is Strobe Mode The LED 54AW will strobe in varying speeds from FLOD to FL id e Press lt MENU gt then press lt UP gt or lt DOWN gt until FLAS is displayed e Press lt ENTER gt to select and press lt UP gt or lt DOWN gt to adjust the speed of strobe FLUU to FL ic FAdE is Color Fade Mode The LED 54AW will fade colors in varying speeds from FAUT to FA ie e Press lt MENU gt then press lt UP gt or lt DOWN gt until F dE is displayed e Press lt ENTER gt to select and press lt UP gt or lt DOWN gt to adjust the speed of strobe FAUU to FA ic ASL is Color Cycle Mode The LED 54AW will switch colors in varying speeds from ASU to AS ie e Press lt MENU gt then press lt UP gt or lt DOWN gt until ASL is displayed e Press lt ENTER gt to select and press
5. bargeheights User Manual LED S4AW TABLEOFCONTENTS 1 The Beginning 3 Unpacking 3 Support 3 Introduction 4 DMX Quick Reference 4 2 Safety Information 5 3 Setup 6 DMX Cabling 6 DMX Termination 6 3 pin vs 5 pin 7 Master Slave Mode 7 4 Operation Configuration 8 Menu Structure 9 DMX Control Mode 10 Standalone Control Modes 11 Master Slave Mode 12 Technical Specifications 13 Photometric Data 13 5 Care Maintenance 14 Returns 14 Shipping Damage 15 Contact Us 15 LED 54AW User Manual rev A 1 THEBEGINNING Thanks Thank you for choosing the Bargeheights LED 54AW This ver satile PAR style LED wash luminaire will provide reliable perfor mance day in and day out To ensure long lasting performance please follow the guidelines in this manual The instructions here are important for your safety and the maintenance of this fixture Enjoy Unpacking All of our luminaires are thoroughly tested prior to being shipped While your LED 54AW functioned perfectly when it left us it may have been bumped around during shipping Please inspect the carton and if you notice any damage take a good look at the fixture If you see any damage it is important to contact our support team right away And if you find any pieces necessary for operation are missing let us know We ll make it right as soon as possible Support If something is not working properly let us know Grab a com puter or your favorite handheld d
6. evice and head to www bargeheights com support for user manuals DMX channel lists and support information You can also email us at support bargeheights com We re happy to help WARNING To reduce the risk of fire or electrical shock do not attempt to use this fixture with any covers missing or removed The Bargeheights LED 54AW carries a one year 365 day man ufacturers limited warranty Please contact Bargeheights for warranty repair or returns All returns require an SR Service Request number If your fixture is still under warranty contact us and we ll walk you through the process 2010 Bargeheights Inc Page 3 Introduction e PAR style LED Wash Luminaire e Amber White color mixing via 54 x 1w LEDs 18 Amber 36 White e High output low power consumption e Variable electronic strobe e Variable electronic dimmer e Master Slave modes e Built in standalone modes no controller required e Amber White color mixing ability in standalone mode e Rugged aluminum chassis e Yoke with integrated floor mount e Quiet internal fan for cooling Page 4 LED 54AW User Manual rev A 2 SAFETYINFORMATION e DO NOT connect the fixture into a dimmer Use constant line voltage only to avoid damage e Make sure you are connecting the fixture to line voltage that is not higher than the voltage stated on the rear of the fixture e The LED 54AW is for indoor use only Do not expose the fixture to rain or other moisture like y
7. isregarding information in this manual will not be covered by your warranty If something is wrong let us take a look at it We ll help you out 2010 Bargeheights Inc Page 5 3 SETUP DMX Cabling The LED 54AW has standard 3 pin XLR connectors for DMX con trol and daisy chaining Up to 32 devices can be daisy chained together on a single run Standard microphone cables will probably work OK but DMX is a serial data transmission with impedance specifications that are different than analog audio Cables specifically designed to transmit DMX signals will always work best As an example Belden 9841 meets the specifica tions for DMX 512 applications The longer the cable distance the more important proper cable selection is Shield Data Data DMX Termination Sometimes errors will crop up in your DMX line especially if it is a long run When this is the case or if you just want to make sure your DMX runs have the best chance at accurate transmis sion you can use a terminator A terminator is a 120 ohm 4 watt resistor which is connected between pins 2 and 3 of a male XLR connector DATA and DATA This connector is inserted in the female XLR connector of the last fixture in your daisy chain to terminate the line Using a cable terminator will de crease the possibility of erratic behavior Terminators are avail able on the internet and from lighting retailers If you re handy with a soldering iron they are simp
8. le to build yourself DMX Terminator 3 pin XLR Male connector 120 Ohm resistor gt 3 Ya watt Page 6 LED 54AW User Manual rev A 3 pin vs 5 pin Some manufacturers use 5 pin XLR connectors for DMX trans mission Don t worry The two are still compatible Adapters are available on the internet and from lighting retailers If you want to build your own here are the proper connections Cable Conductor 3 pin Female 5 pin Male output input Shield Ground not connected not connected not connected not connected Master Slave Mode The LED 54AW also has a Master Slave mode In this mode you can set the first fixture in the line to act as the master control ler and up to 32 other fixtures can be connected and will mir ror the operation of the first In this configuration you do not need a DMX controller Master Fixture N DMX QUT Connect the fixtures just as you would for DMX control See the OPERATION sec tion of this manual for more information on how to set up Master Slave mode DMX IN DMX OUT to next O Ena Slave Fixture 2010 Bargeheights Inc Page 7 4 OPERATION CONFIGURATION We here at Bargeheights don t really care for DIP switches They are hard to see in the dark and since most of us don t quickly think in binary they are tricky to set properly The LED 54AW has an LED display with a simple menu system There are four control buttons below the display that all
9. our dishwasher e Do not operate the fixture with flammable items nearby NEVER lay anything on the fixture while it is on e Give it space The LED 54AW needs at least 6in 15cm from other surfaces and objects Make sure that none of the ventilation or fan slots are blocked e ALWAYS disconnect the fixture from its power source before servicing or cleaning e ALWAYS secure your LED 54AW using a safety cable NEVER hang or carry it by its cord It has a yoke for a reason e DO NOT operate when the ambient temperatures are higher than 104 F 40 C If it s too hot for you it s too hot for your LED 54AW e If your LED 54AW stops working properly stop using it immediately NEVER try to repair it yourself Attempting repairs in the field can result in damage or injury Please contact us for repairs or replacement e Make sure the power cord is not frayed or damaged e Never disconnect the power cord by pulling on the cord Use the plug e Avoid direct eye exposure to the light source while it is on It s cool looking and fun to watch but staring into the light can damage your eyes Caution There are no user serviceable parts inside this fixture Do not open the housing or attempt any repairs yourself Not only is it a bad idea it will void your warranty which is a bummer when you need a working light If you do need service please contact Bargeheights Damages sustained as a result of modifications to the fixture or d
10. ow you to navigate the control menus Menu Enter Up Down lt MENU gt Go up a level in the menu system lt ENTER gt Select the current number menu selection lt UP gt Scroll to the next higher number or menu selection lt DOWN gt Scroll to the next lower number or menu selection To access the main menu press the lt MENU gt button Use the lt UP gt or lt DOWN gt buttons to navigate through the menu options Press the lt ENTER gt button to select the option dis played and use the lt UP gt or lt DOWN gt buttons to change the settings Once your changes are made press lt ENTER gt to accept the change If the LED 54AW menu remains static for more than eight sec onds it will automatically return to its last setting To exit the menu without making any changes press the lt MENU gt button Page 8 LED 54AW User Manual rev A Menu Structure 2010 Bargeheights Inc DMX Address Setting Amber Dimmer White 1 Dimmer White 2 Dimmer Strobe Slow gt Fast Color Fade Slow gt Fast Color Cycle Slow gt Fast Sound Control Mode Color Cycle Sound Control Mode Strobe Page 9 DMX Control Mode To change the DMX starting address e Press lt MENU gt until Addr is displayed e Press lt ENTER gt to display the channel number and press lt UP gt or lt DOWN gt to select your starting address AGG I A ie e Press lt ENTER gt to assign your selection DMX
Download Pdf Manuals
Related Search