Ride Secure User Manual
Contents
1. PE AUDIBLE SILENT VIBRATE Enter programming mode The Q icon will begin to flash press button 1 to select The LCD will display the current settings To program follow these steps 1 Press Button 2 to scroll between the alert options 2 Press button 4 to save SCORPIO iiio 1 Q 0 A 2 Alert options include alert off vibrate audible vibrate and audible SETTING CLOCK TIME Enter the programming mode Press button 4 repeatedly until the HB BH icon begins to flash Press button 1 to select and enter clock setting mode Press button 1 to scroll through hour and minute settings The selected item will be flashing Press button 2 to adjust the setting of the selected item Press button 4 to save setting and exit or press button 3 to abort ADJUSTING THE ACCELEROMETER IMPACT SHOCK SENSOR Enter the programming mode Scroll to the icon and press Button 1 to select The screen will display the current shock setting and the siren will chirp 1 5 times to confirm sensitivity level To program follow these steps gt SHOCK 2 an d To test sensitivity bump the motorcycle while in sensitivity adjustment mode The red light on the RIDE module will light solid for 5 seconds to indicate an alarm trigger To avoid false alarms resist the urge to set the sensor on the highest setting2. RIDE SECURE USER GUIDE powered by Sco R P Oo TABLE OF CONTENTS coe o KR SB de Remote Transceiver Icons and Message Displays Transceiver Charging Instructions Transceiver Battery Status Operating Instructions Programming Instructions Selecting Transceiver Alert Type Audible Silent Vibrate Setting Clock Time Adjusting the Accelerometer Impact Shock Sensor REMOTE TRANSCEIVER ICONS AND MESSAGE DISPLAYS SCORPIO s Q Alert Type Aud Vibr O Button 1 Q System Status Q Button 2 Q Audible Silent Alert Indicator Button 3 Battery Level Indicator O Button 4 Q Clock 9 Charger Input TRANSCEIVER CHARGING INSTRUCTIONS We recommend the remote be charged for at least 10 hours when first received to ensure full life of battery Plug in provided charger into the transceiver While the transceiver is charging the icon will scroll from empty to full When transceiver is fully charged the Mw icon will no longer change TRANSCEIVER BATTERY STATUS The LCD will display this icon to show the Transceiver battery level OPERATING INSTRUCTIONS The following instructions assume the RIDE core is installed and the transceiver is within range of the motorcycle Arm with Perimeter Sensor Off Press button 1 siren chirps 3 times The Transceiver echoes 3 chirps and the LCD displays a and PER OFF icons Disarm Press button 2 siren chirps 1 time The Transceiv
3. er echoes 1 chirp and the LCD displays W icon Arm with Perimeter Sensor Press button 5 siren chirps 4 times The Transceiver echoes 4 chirps and the LCD displays f icon The system is armed and the Perimeter Sensor is enabled Arm without Siren Paging Only Press buttons 1 and 3 at the same time siren chirps 5 times The Transceiver echoes 5 chirps and the LCD displays a and icons The system is armed with perimeter but the siren is disabled Arm without Siren or Perimeter Press buttons 2 and 3 at the same time siren chirps 6 times The Transceiver echoes 6 chirps and the LCD displays a N and PER OFF icons The system is armed but the siren and perimeter sensor are disabled Panic Trigger When system is armed press button 3 for 5 seconds to sound Panic feature panic feature will sound siren for a few seconds drawing attention to your bike PROGRAMMING INSTRUCTIONS To program the transceiver the MCM does not have to be installed or be within range The programmable modes for the Transceiver are Transceiver Alert Type Audible Silent Vibrate Clock To program the MCM the system must be installed within range and in the disarmed mode The programmable modes for the MCM are Adjusting Accelerometer impact shock sensor Entering Programming Mode Follow the steps below to enter the programming mode SCORPIO fh 18 I SELECTING TRANSCEIVER ALERT TY
Download Pdf Manuals
Related Search