PopPulse T2024 manual
Contents
1. PopPulse T2024 Class T Stereo Amplifier USER GUIDE 1 Introduction Congratulations on purchasing a PopPulse T2024 Class T stereo amplifier Thanks to it utilising advanced Tripath technology amp audiophile grade parts the T150 is easily able to achieve the sonic performance of traditional high end amplifiers but in a compact affordable and efficient little unit Based around the famous Tripath 2024 IC this amplifier is able to outperform most traditional amplifiers even very expensive ones and can be partnered to some very exotic full range speakers With a power output of up to 15 Watts RMS the T2024 has sufficient power to drive most reasonably sensitive hifi speakers to a decent volume level 2 Features Uses Tripath technology for audiophile quality sound 90 efficient Hardly generates any heat No start up pop Can be powered by a 12v lead acid battery to further improve sound quality Uses high quality RCA sockets and full size speaker terminals Alps RK27 volume control can be bypassed via an internal jumper for use with a pre amplifier Over current protection Thermal protection Uses Audiophile parts and components Housed in a top quality metal case with a very classy thick aluminium front facia plate Case is strong good looking and provides excellent shielding from electronic interference 3 Overview 4 Getting Started Guide e Carefully unpack amplifier e Observing correct polarity attach l2. eft and right speakers to the left and right speaker terminals The use of banana plugs not supplied is highly recommended and makes hooking up speakers very easy e Plug audio source into the left and right RCA sockets don t switch on audio source yet e Plug the supplied 12v power supply into the 12v DC power socket on the rear of amp do not turn mains power on just yet e Make sure that the volume control is turned down fully e Power up the 12v power supply and using the switch power switch on the amplifier back panel turn on the amplifier The blue power LED on front of amplifier should light up e Play audio source e Turn up volume to suitable level e gt Enjoy 5 Accessories Comes complete with 12v switched mode power supply UK IEC mains power lead Spare DC power lead could be used to attach to a 12v battery or better quality PSU User Guide A set of 4 stick on rubber feet 6 Specifications T Amp IC Tripath 2024 Output Power 2x15W 4 Ohm 2x10W 8 Ohm Signal to Noise Ratio SNR 98dB IHF IM Distortion 0 10 1W 40hm THD Noise Audiophile Quality 0 038 9W 4 Ohm 0 1 11W 4 Ohm 0 1 6W 8 Ohm High Power 10 10W 8 Ohm 20 10W 8 Ohm 90 10W 8 Ohm RCA inputs Left Right Power Socket 5 5mm 2 1mm Left and Right full size speaker terminals also takes banana plugs Switches amp Knobs Power ON OFF switch on rear panel Blue LED power indicator Volume Knob DC 12V 13 2V ma
3. x Dimensions W 76mm x H 46mm x D 114mm case only 150mm incl sockets amp knob 500 Grams 7 Troubleshooting Checklist Make sure AC power lead is plugged into 12v PSU and that mains are switched on Make sure that the DC power lead from PSU is plugged into the DC power socket on the amps rear Make sure music is playing and the volume is not turned totally down If volume control is not working make sure that the internal jumper is not set up to bypass volume control 8 How to bypass volume control for use with a pre amp BY PASS VOLUME CONTROL AT A POWER AMP Default jumper settings as supplied INTERGATED AMP WITE VOLUME CONTO This is not an official PopPulse User Manual It s the work of www luckyfrogaudio co uk
Download Pdf Manuals
Related Search