Kiddicare Shuffle SP Isofix Seat Orbit Black
Contents
1. 9 18 kg If you are unsure please contact the manufacturer of the safety restraint or the retailer WARNING Your C Group 1 Car Seat MUST be fitted usin the Top Tether Strap 1 Car Seat Strap In use Your ISOFIX Group 1 Car Seat This child seat is classified Group 1 and is suitable for children weighing 9 to 18 kg approx age 9 months to 4 years 1 1 Base cover 2 Adjuster x2 3 Harness adjuster strap x2 4 Crotch strap 5 ISOFIX system adjustment handle 6 ISOFIX base 7 ISOFIX connector x2 8 Belt buckle 9 Safety pad harness shoulder strap x2 10 Top Tether Strap 11 ISOFIX connector release button x2 12 ISOFIX system strap Fitting the ISOFIX Car Seat Fold the Top Tether Strap over the back of the car seat so that it does not get trapped during installation 2 Ex tend the ISOFIX connectors from the car seat as much as possible by pulling simultaneously on the red handle on the base and the red ISOFIX system strap 3 Position the car seat on the vehicle s rear seat and bring the ISOFIX connectors so that they are in line with the seat s ISOFIX anchor points 4 Click the ISO connectors into the anchor points the indicators on each connec tor should turn from red to green 5 Release the safety catch of the ISOFIX system by pulling the red handle attached to the base and gently pushing the car seat 6 With the safety catch released push the car seat by exerting equal pres2. SOPPI SJOP SJOP SOPPI Wee ere Wee ere Weve ere QJOSIOOy QJOIIOOy SOPP kiddicare shuffle sp isofix Group 1 universal Isofix car seat IMPORTANT KEEP FOR FUTURE REFERENCE READ CAREFULLY FCISO31 Safety ATHESE INSTRUCTIONS MUST BE READ CAREFULLY BEFORE INSTALLATION FITTING THE SEAT INCORRECT LY CAN PUT YOUR CHILD AT RISK This car seat must only be fitted on the rear seat of a vehicle equipped with ISOFIX fastenings and a Top Tether anchor universal ISOFIX approval Please refer to your car manual Always remember to attach and correctly adjust the child s harness and never drive away without checking that the seat is securely fastened to the car s rear seat as indicated in this manual Make sure the harness buckle is fitted as low as possible to keep the lap section safely across the child s pelvis Check that the harness straps are not twisted The child car seat must be firmly attached to the seat as closely as possible no gap to ensure maximum protection See the procedure recommended in these instructions Under no circumstances should the car seat be altered in any way or should parts be added to it You should replace this car seat if it is severely impacted during an accident or if it shows wear and tear Regularly check that the harness shows no sign of wear and tear particularly the fastening points the stitching and the adjuster belts Never leave your child in the seat unsupervised Make sure that no pa
3. bleach do not iron do not machine wash and do not tumble dry Kiddicare Club Way Cygnet Park Hampton Peterborough Cambridgeshire PE7 8JA Customer Care hello kiddicare com
4. ey Fitting the harness Put the harness shoulder straps in one of the two positions indicated 14 so that they always pass over your child s shoulders see paragraph on Adjusting the harness To tighten the harness Pull on the adjusting straps positioned on the harness You do not need to press on the adjuster buttons 15 IMPORTANT A poorly fitting harness can be dangerous You should not be able to insert two fingers between the shoulder strap and your child s chest To loosen the harness Press on the adjuster buttons positioned on the upper section of the harness grasp the lower section and pull simultaneously 16 Adjusting the harness Make sure that the harness of your car seat is adapted to the height of your child before starting to install the seat in your car The harness can be adjusted to two different heights The straps must pass through the holes that are closest to your child s shoulders If your child s shoulders are between two levels always use the higher of the two To adjust the height of the harness remove the upper section of one of the harness straps by twisting the metal keeper located behind the backrest and then pulling the end of the harness strap through the slots of the shell and the cover 17 Feed the end of the harness strap through the same slots at the desired height both in the cover and the shell and reattach it behind the backrest 18 Make sure that the metal anchor is correctly p
5. osi tioned and that the harness strap is not twisted Repeat the operation on the second strap Inclining the ISOFIX Car Seat Push the adjustment lever located under the front of the seat upwards then pull or push the base towards or away from you 19 Removing the ISOFIX Car Seat Loosen the Top Tether Strap by pressing the button on the tensioner 20 then release the strap from its anchor point and bring the strap towards you 21 Pull the car seat using the red handle on the ISOFIX base 22 On either side of the seat release the ISOFIX connectors from their anchor points by pulling the red plastic release buttons on the connectors towards you The indicators will turn from green to red 23 24 The seat is now unat tached and can be removed from the rear side 25 Storage of the instruction manual Always read the safety instructions Read these instructions carefully before use and keep them to hand in the pocket provided for future reference 26 Maintenance Do not use this product if any part is broken torn or missing and use only spares provided by the manufacturer Car seats buckles that feature an audible alarm are powered by a lithium battery This is not a consumer service able part To replace the battery please contact your retailer Cleaning All the material parts can be removed Slight stains can be removed using a damp sponge soaked in soapy water or it can be washed by hand at 30 in soapy water Do not use
6. rt of the seat is trapped in a door or folding seat If your car is fitted with a rear folding seat check that it is securely locked in the upright position Direct exposure to the sun increases the temperature inside the vehicle You should therefore cover the car seat when it is empty so that the parts espe cially the buckles do not heat up and burn the child Never use the car seat without its cover or use any other cover than that recommended by the manufacturer In the event of an emergency the child must be able to be released quickly The buckle which opens easily should therefore never be covered Tell your child that he she must never play with the belt buckle Always remember to check that there is no food or other waste in the belt buckle or the central adjuster Luggage and all other heavy or sharp objects in the vehicle must be securely held down Objects that are not fastened can injure the child if an accident occurs Do not dress your child in overly bulky clothing in winter WARNING This is an ISOFIX SAFETY RESTRAINT DEVICE FOR CHILDREN It conforms to the Regulation 44 standard and 04 amendments for use in a vehicle fitted with an ISOFIX anchoring system It can be used in vehicles fitted with seats approved as universal ISOFIX positions refer to your car manual according to the category and size of the child safety restraint The mass group and the ISOFIX size class for which this product is suitable are A B and B1
7. sure on both sides until the rear of the car seat is pressed firmly against the rear seat 7 Bring the Top Tether Strap over the vehicle s rear seat and attach the clasp to the vehicle s Top Tether anchor point 8 The additional Top Tether anchor point may be located depending on the make of your car Behind the vehicle s rear seat On the floor at the rear of the vehicle On the ceiling at the rear of the vehicle A Refer to your car user manual to locate the additional Top Tether anchor point Never attach the Top Tether to a point that is not recommended by the vehicle manufacturer Never alter the vehicle yourself in order to try and fasten the Top Tether e g by piercing screwing or attaching an anchor point IMPORTANT T ze class of this car seat is A B and_B1 It can be fitted in vehicles with seats s universal ISOFIX posit r to your car manual Push the seat against the back of the rear seat and pull on the loose end of the Top Tether Strap When the belt is as taut as it will go the indicator on the Top Tether Strap will turn to green 9 Belt buckle To fasten the harness bring the two shoulder straps together 10 11 and insert them into the buckle you should hear a click 12 To release the harness press the buckle s red button 13 Some ISOFIX car seat models are fitted with an optional alarm The alarm sounds to alert the parents if the child releases the buckle during a journ
Download Pdf Manuals
Related Search