INSTRUCTIONS FOR SAFE USE
Contents
1. carriage The ToughPIX II 2410 Series digital camera Operating 01 10 5 cannot be maintained in the field and must rod rear and e Contact the manufacturer for information on the dimensions of the flameproof joints e The apparatus must only be used in areas where there is low risk of impact Do not charge battery pack in the hazardous area The battery must be removed from the camera and charged in the CorDEX The ToughPIX II 2410 Series digital camera incorporates a protected battery system with a non replaceable fuse This fuse is only to be replaced by CorDEX Instruments or a CorDEX Instruments Approved Repair Facility Failure to do so will void the certification Ensure that the ToughPIX II 2410 Series digital camera battery pack is Secured be returned to the manufacturer should repair or maintenance be required USB communications with the ToughPIX II 2410 Series digital camera must only occur within the non hazardous area When replacing the battery pack the screw must be re tightened to a torque of 1 5 4Nm and the cover cap replaced Only CorDEX battery pack CDX2400 011 shall be used LABELLING CorDEX Instruments Ltd 1 Owens Rd Middlesbrough TS6 6HE UK TP2410 Explosion Proof Digital Camera Es Ex d IIB H2 T6 GbTamb 20 C to 50 C ATEX TRACI3ATEX0046X IECEX JEGEx TRC 13 0016X Instruments ToughPIX II charging bay Using a different charging device can cause damage and vo2. CorDEX TT INSTRUCTIONS FOR SAFE USE TOUGHPIX Il EXPLOSION PROOF DIGITAL CAMERA AUTHORITY CorDEX ToughPIX II Instructions For Safe Use CONTENTS Read This First Liability Trademark Information Product Information Instructions for Safe Use Labelling Operational Cautions Certification EC Declaration of Conformity ATEX IECEx Certificate O ONNI 0 GI F amp F WWW Q RUGGED READ THIS FIRST The ToughPIX II 2410 range of flame proof digital cameras are suitable for use in hazardous areas Ex zones potentially explosive environments Read and understand all Warnings and Cautions before using this product Liability The technical specification of the camera complies with relevant European Ex standards EN 60079 0 and EN60079 1 The user is solely responsible for ensuring the equipment is suitable for the intended purpose and environments CorDEX Instruments will not be liable for any injury or damage resulting from unauthorized adjustments to or dismantling of the camera or for use with inappropriate applications or environments Trademark Information Microsoft and Windows are U S registered trademarks of Microsoft Corporation Pentium is a registered trademark of Intel Corporation Macintosh is a trademark of Apple Computer Inc SD is a trademark Other names and products may be trademarks or registered trademarks of their respect
3. EC Certification Scheme for Explosive Atmospheres for rules and details of the ECEX Schema vied Wwa k est oom Certificate No IECEx TRC 13 0018 ua Moco Corbficate history Status Current Daie of Issue 2013 11 28 Fage 1of3 Applicant CorDEX Instruments Lid Limit 1 Owens Road Skippers Lane Industrial Estate Electrical Apparatus CorDEX Ex d Camera ToughPIX Il TP2410 Opbonal accessory Type ol Protection Flameproo Marking Ex d 1184H2 T Gb 20 C Tamb 50 C Aporoved for sue on behalf of the IECEx Stephen Winsor Carttication Body Position Certification Officer for printed wersion Date 2013 11 28 1 This certificate and schedule may only be reproduced in full 2 This certificate is not trangterable and remains the property of the issuing body 3 The Status and authenticity of this carb icale may be veribed by visting ihe Official IECEx Website Certificate issued by Ta Global Lid Unit 1 Pendle Place i A 3 E a C D E X CorDEX Instruments Lid 0 r Unit 1 Owens Road Skippers Lane Industrial Estate MIDDLESBROUGH TS6 6HE Declaration No S0 11 Rev 3 EC Declaration of Conformity in accordance with EEC ATEX Directive 94 9 EC We CorDEX Instruments Ltd Hereby declare that the products described below Product Explosion proof digital camera Model TP2410XP are in conformity with the essential health and safety requirements of Council Directive 94 9 EC relating to equ
4. e in potentially explosive atmospheres given in Annex Il to the Directive The examination and test results are recorded in the confidential report TRA 014451 33 00A Compliance with the Essential Health and Safety Requirements with the exception of those listed in section 18 of the schedule to this certificate has been assured by compliance with EN60079 0 2012 EN60079 1 2007 if the sign X is placed after the certificate number then this indicates that the equipment or protective system is subject to special conditions of safe use specified in the schedule to this certificate This EC Type Examination certificate relates only to the design and construction of the specified equipment in accordance with Directive 94 9 EC Further requirements of this Directive apply to the manufacture and supply of this equipment The marking of this equipment or protective system shall include the following Ex Ex d IIB H T6 Gb 20 C lt Tamb lt 50 C This certificate and its schedules may only be reproduced in its entirety and without change This certificate is issued in accordance with the TRaC Ex Certification Scheme SP Nine S P Winsor Certification Officer issue date 2013 11 28 Copy No te Page 1015 Form RF356 is16A Document Reference TP240050M Rev A CorDEX ToughPIX II Instructions For Safe Use EC DECLARATION OF CONFORMITY RUGGED IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION I
5. id certification RUGGED Document Reference TP240050M Rev A CorDEX ToughPIX II Instructions For Safe Use OPERATIONAL CAUTIONS The cautions contained in this section do not relate specifically to safe use in hazardous area applications but should be followed to help prevent damage to the device or personnel e Keep out of reach of children e The TP2410 is a precision instrument Do not drop it strike it or use excessive force when handling Maintenance For safety critical maintenance please refer to EN60079 17 RUGGED CERTIFICATION TRAC EC TYPE EXAMINATION CERTIFICATE Equipment or protective system intended for use in potentially explosive atmospheres Directive 94 9 EC Annex Ill EC Type Examination TRAC13ATEX0046X Centificate No Equipment CorDEX Ex d Camera ToughPIX II TP2410 Manufacturer CorDEX Instruments Ltd Address Unit 1 Owens Road Skippers Lane Industrial Estate Middlesbrough Cleveland TS6 6HE United Kingdom This equipment and any acceptable variation thereto is specified in the schedule to this certificate and the documents therein referred to TRaC Global Lid Notified Body number 0891 in accordance with Article 9 of the Council Directive S94 S EC of 23 March 1994 certifies that this equipment has been found to comply with the Essential Health and Safety Requirements relating to the Gesign and construction of equipment or protective system intended for us
6. ipment intended for use in potentially explosive atmospheres ATEX Directive Ex II 2 G Ex d IIB H2 T6 Gb Tamb 20 C to 50 C equipment by the application of the following Standards BS EN 60079 0 2012 Explosive atmospheres Equipment General requirements Explosive atmospheres Equipment protection by flameproof BS EN 60079 1 2007 anclosiires di as certified by Notified Body Number 0891 TRaC Global Ltd UK by EC Type Examination Certificate TRAC13ATEX0046X and IECEx Certificate IECEx TRC 13 0016X and are subject to the procedure set out in Annex VII of Directive 94 9 EC and these procedures are in conformity with the requirements of EN 80079 34 under the supervision of Notified Body Number 0518 SIRA Certification Service Rake Lane Eccleston Chester CH4 9JN England It is ensured through internal measures that the products conform at all times to the requirements of the current EEC Directives and relevant standards 7 ee y SA 7 Signature i J Authorised Person Position Director on behalf of CorDEX Instruments Ltd Date 07 10 2014 Product Serial number Better Better_Work CorDEX 03_CorDEX_Products CorDEX_Products_ToughPIXII CorDEX_Products_ToughPIXII_ECDeclaration EC Declaration of Conformity TP2410XP Rev A docx Document Reference TP240050M Rev A CorDEX ToughPIX II Instructions For Safe Use RUGGED Document Reference TP2400S0M Rev A iKi Copyright 2014 CorDEX Instruments Lim
7. ited All other brand and product names are trademarks of CorDEX Instruments Limited Document Reference TP240050M Rev A
8. ive owners Product Information Product design and specifications are subject to change without notice This includes primary specifications software software drivers and user s manual The User Manual is a general reference guide for the product The manufacturer assumes no liability for any errors or discrepancies in the user manual Document Reference TP2400SOM Rev A CorDEX ToughPIX II Instructions For Safe Use INSTRUCTIONS FOR SAFE USE As defined by clause 29 2 i of EN60079 0 The conditions referenced in this section relate specifically to hazardous area applications and must be followed In accordance with clause 5 1 0f EN 60079 1 the critical dimensions of the flamepaths are Flamepath Maximum Minimum L 7 l Serial Number XXXX XX XXXX Gap mm mm using the plug provided If the plug is lost Year of Construction YY YY only replace with a plug of the correct size Rear 0 04 6 9 and type If in doubt contact your nearest C Powered by Refer to Manual eee CorDEX Instruments representative CE 0518 Flash 01 13 8 The ToughPIX II 2410 Series digital camera Window front is manufactured from aluminium alloy and Carriage must contain less than 7 magnesium by DO NOT OPEN WHEN EXPLOSIVE ATMOSPHERE PRESENT Tena 13 8 weight and incorporates toughened glass front carriage windows This should be taken into account when considering the end use application Lens window 0 1 LIE front
Download Pdf Manuals
Related Search