CP5-Series User Manual
Contents
1. Place the required weight on the center of the platform and press the vA once more 6 The display will show PASS and return to normal weighing mode Calibration is complete V Error Codes 1 OUTZ Zero range has shifted Perform calibration adjustment If the problem persists the load cell may be permanently damaged due to overloading 2 UNST Scale is unstable Use in a more stable position 3 HHHHH Maximum capacity exceeded Remove the extra weight to avoid damaging the load cell 4 L Batteries are low Replace the batteries DZ1 500 Max Capacity 500g Readability 0 1g Min Weight 0 2g 2 x AAA Alkaline Batteries Dimensions 0 8 x 2 4 x 3 5 Platform Dimensions 2 2 x 2 2 Warranty 90 Day Limited Warranty For warranty and support please email warranty digitzscales com2. DZ1 500 Manual I Operation 1 Place the scale on a flat level surface and press the key to turn the scale on 2 Once the start up process completes and the scale goes to zero you are ready to weigh 3 Place the quantity to be weighed onto the weighing platform 4 Wait a couple seconds for the display to stabilize before taking a weight reading Il Changing the Unit of Measure 1 Press the M key to change the scales displayed unit of measure 2 If the scale is turned off then back on it will default to the last unit used DZ1 500 Units g gram oz ounce ozt troy ounce dwt pennyweight lll Using the Tare Feature 1 Place the empty container or vessel on the weighing platform l 2 Press the A key once The display will then reset to zero If the container is removed it s weight will be displayed as a negative number 3 You may now fill the container with the quantity to be weighed The display will show the net weight of he contents 4 To return to normal weight display gross weight remove any items from the weighing platform and Y press the 71 key again to re zero the scale IV Calibration Adjustment 1 Turn the scale OFF O 2 Press and hold the M key then tap the key to turn the scale on 3 Release the M key once the display shows a ran dom number ISN O 4 Tap the 7 key again The display will show Zero followed by the required calibration weight 5
Download Pdf Manuals
Related Search