user manual
Contents
1. and hold on Rec button it will sound Dee Dee this means it is in coding mode then trigger the wireless equipment it will sound when code successfully 4 Delete Coding Method press and hold Clr1 and Clr2 buttons at the same time it will give a long sound then Dee Dee then long sound again it means you have deleted all code successfully T built in rechargeable battery power Input cable p siren output cable Rec Clr1 Clr2 Note 1 Don t install on unstable surface 2 Don t install on metal wall or door 3 No need to distinguish positive and negative poles when connected with external power 4 After arm by wireless remote controller the Alarm LED will flash every one minute Warning we are not responsible for the problem caused by improper operation or change the product configuration it may lose the authority of product warranty 22. 1000mA external power adapter 14 dimension is 230 165 57mm red white color Installation drill holes external power input 1 mark the drill hole and drill holes on the wall cable accordingly cms 2 using the screws with countersink heads to fix 9 digit address code the back cover on the wall 3 double check the stability after installed tamper switch button drill holes LED Flash Light Indication coding delete LED mEn 1 Power LED will be on when the siren is connected with external AC power Alarm LED fE AS gt Fi 2 when arm by wireless remote controller the Alarm LED will flash twice and flash once when disarm 3 after arm by wireless remote controller the Alarm LED mm oe 5 2 Alarm LED will flash every one minute coding status LED Power LED double flash Light User Manual Installation Guide Coding and Delete Coding Method 1 drive out the four screws in the back cover and remove the front cover 2 connect the power the power green LED will keep on 3 Coding Method A siren on normal mode and alarm control panel on wireless coding mode please refer alarm control panel user manual press and hold on tamper switch button on back of the siren in 3 seconds when it gives a long sound it means match code successfully B alarm control panel on manual coding mode enter the 9 digit address code to match this will be a higher probability of coding success C press
3. User Manual Installation Guide PE 9403 Wireless Sound and Light Siren Double Flash Light User Manual PE 9403 is wireless sound and both sides of double flash light siren built in emitting antenna louder 120dB siren It can work with wireless alarm panel and other wireless devices max 16 via wireless signal transmission when wireless PIR detector had been triggered and send out the wireless alarm signal to siren it can make the alarm and flash light by itself separately It has anti tamper function via built in tamper switch button to avoid intentional damage or dismantle more suitable to install on corridor outside window under eave etc Features max support 16 wireless equipments support wireless alarm control panel PIR detector door window sensor etc dual way communicate with wireless alarm control panel built in Siren 120dB high alarm volume around 120dB via built in siren sound and light indication for arm disarm status F built in emitting double flash lights on both sides Antenna 2 3 4 5 sound for 2 5 minutes when alarm had been triggered if without disarm 6 7 8 anti tamper function via built in tamper switch button 9 wireless emitting frequency 433MHz 868MHz 10 wireless emitting range is 200m in open terrain 11 consumption current is 50mA static lt 500mA alarm indication 12 built in rechargeable battery 12V 1 3Ah up to 20 hours when power off 13 included 18V
Download Pdf Manuals
Related Search