LCD Monitor User Manual
Contents
1. 24 Recall Warm Color Temperature Warm 6500K from EEPROM Recall Normal Color Temperature Normal 7300K from EEPROM Recall Cool Color Temperature Cool 9300K from EEPROM Red Gain from Digital register User Green Gain Digital register Recall SRGB Color Temperature sRGB from EEPROM 25 Color Boost Press MENU Menu to display menu M Press or to select Color Boost and press MENU to enter Press or to select submenu press MENU to enter and press or to adjust Press AUTO to exit 26 Full Enhance Disable or Enable Full Enhance Mode Nature Skin on or off Disable or Enable Nature Skin Mode a Green Field Disable or Enable Green Field Mode Sky blue Disable or Enable Sky blue Mode AutoDetect Disable or Enable AutoDetect Mode 21 Picture Boost Press MENU Menu to display MENU Press or to select Ba Picture Boost and press MENU to enter Press or to select Bright Frame Select on to activate Picture Boost Press or to select submenu press MENU to enter and press or to adjust Press AUTO to exit 28 Frame Size 14 100 Adjust Frame Size Brightness 0 100 Adjust Frame Brightness 0 100 Adjust Frame Contrast 0 100 Adjust Frame horizontal Position 0 100 Adjust Frame vertical Position Bright Frame Disable or Enable Bright Frame 29 OSD Setup Press MENU Menu to display menu Press or to sele2. Possible Solutions Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor Is the power cord connected properly Check the power cord connection and power supply Is the cable connected correctly Connected using the D sub cable Check the DB 15 cable connection Connected using the DVI cable Check the DVI cable connection DVI input is not available on every model If the power is on reboot the computer to see the initial screen the login screen which can be seen If the initial screen the login screen appears boot the computer in the applicable mode the safe mode for Windows ME XP 2000 and then change the frequency of the video card Refer to the Setting the Optimal Resolution If the initial screen the login screen does not appear contact the Service Center or your dealer Can you see Input Not Supported on the screen You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly Adjust the maximum resolution and frequency that the monitor can handle properly Make sure the AOC Monitor Drivers are installed Adjust the Contrast and Brightness Controls Press to auto adjust Make sure you are not using an extension cable or switch box We recommend plugging the monitor directly to the video card output connector on the back Move electr
3. LCD Monitor User Manual 2 95Vh WWW a0C COm 2011 AOC All Rights Reserved National A ini 4 ETT e A Sd a 5 tala o sicario lili EE 6 A lalla iaia 7 OMET A a eee ee eee 8 DO UU E 9 Adi BOX ias dio sacas e A 9 Dep SANA SB EE 10 AGYUSEING Viewing FANG EE 11 Connecting the e 12 Wali MO OD e KE 13 AGUSUN e EE 14 setting Optimal Ge de caida las 14 A o E O AO 14 WINOOWSAR EE 16 Windows E AL EE 17 ENEE 18 01 B 1211410 A Un ae eran Men nee ere ee eee ee ee ere 19 D L alii 20 Is Greter e EE 22 Color Temperature EE 24 E eed E 26 FICUS BOOS EE 28 CS DE A O a ee ere 30 A E a E RE 32 A PR jd dd hidu earn duit 34 Ek EE 36 ED IMGIC ATOM ie ei dra pda ais 37 Be 38 AA EE 38 Kl ele AAA tentacles dash ascai teen tadatmunn ci tha Norte aaeniuta Keds uteedas nds 24 itas lars tace eh iicetetaghee ten watebetien 38 KT elle E EE 42 WINGOWSAP a adj dara erat 44 Windows 2000 EE 47 WAVING OW SUI E ilaele Ni o Meet ad ad oia 47 UE A A II A II A a E A 48 A ee ee 49 SCIeent illo 50 A E icaro 51 A A 53 ET Ee Ee Te ee EE 53 Preset DIS Dla ei 54 EIER rail 55 FILO ANA PIa O A O NOOO 56 PROG ICO GE 57 Es ee ee eelere 57 WEEE Declara ON a com Maia gore ok ia illa iaia 58 EPEAT De Cara A A AE aa 59 o A 60 Warranty otatementior Europe o a e RR na a el 60 Warranty Statement for North 8 South America excluding Braz 62 Warranty Statement for AP iii 64 Safety National Conventions The
4. Apdo not engage the LCD monitor in severe vibration or high impact conditions during operation Addo not knock or drop the monitor during operation or transportation Setup Contents in Box Y Monitor Y Y LJ OSG QSG CD MANUAL Base Stand Y n DI H Power cable VGA cabel DVI cabel HDMI cabel Audio cabel USB cabel Not all signal cables Analog USB DVI and HDMI cables will be provided for all countries and regions Please check with the local dealer or AOC branch office for confirmation Setup Stand amp Base Please setup or remove the base following the steps as below Setup e Remove 10 Adjusting Viewing Angle For optimal viewing it is recommended to look at the full face of the monitor then adjust the monitor s angle to your own preference Hold the stand so you will not topple the monitor when you change the monitor s angle You are able to adjust the monitor s angle from 4 to 18 4 NOTE Do not touch the LCD screen when you change the angle It may cause damage or break the LCD screen 11 Connecting the Monitor Cable Connections On Back of Monitor and Computer WUER o III Big rie ail up ee BERBERA EEES EEE DH eee li HI py a Bjo
5. LIMITATION MAY NOT APPLY TO YOU ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM COUNTRY TO COUNTRY THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS PURCHASED IN THE MEMBER COUNTRIES OF THE EUROPEAN UNION Information in this document is subject to change without notice For more details please visit http www aoc europe com en service index php 61 Warranty Statement for North amp South America excluding Brazil WARRANTY STATEMENT for AOC Color Monitors Including those Sold within North America as Specified Envision Peripherals Inc warrants this product to be free from defects in material and workmanship for a period of three 3 years for parts amp labor and one 1 year for CRT Tube or LCD Panel after the original date of consumer purchase During this period EPI EPI is the abbreviation of Envision Peripherals Inc will at its option either repair the defective product with new or rebuilt parts or replace it with a new or rebuilt product at no charge except as stated below The parts or product that are replaced become the property of EPI In the USA to obtain service under this limited warranty call EPI for the name of the Authorized Service Center closest to your area Deliver the product freight pre paid along with the dated proof of purchase to the EPI Authorized Service Center If you cannot deliver the product in person Pack it in its ori
6. Select your monitor model and click the Next button The files will be copied from the CD to your hard disk drive 13 Close all open windows and remove the CD 14 Restart the system The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles 41 Windows Vista 1 Click Start and Control Panel Then double click on Appearance and Personalization Liner Pam ir i AS ae ee peed Pare Tet Re A ay ERA desi Le ME Ke I al Se a L o z si A TR G K ao L ade d l me L t SERA AA PLS Be EI mie giel Dach ps beggen anal airs 4 C In pe el Mia de j _ a ri ii i e t de cao K ER ge PA b r i e fr le Y Le Ei Tas lb i lanla m da ra pesi prp perio ge vP R RA lo AP Oe iu B PB CRE AS BER Ei E fe s Term a Ra E PE El o i we a Ba Lie Lei a e Men N V vr pra ap PS je leer Ee Vim Ler R vrzo Pal db d rn i R b a K Leem et reegen bag EE e er r 9 me ere m ee Hr o m ES rin pai eee Kad sei M re al didi KI AE I i LI ep DL A e Eri Mm A a ees kye p piepe emm r E IP fm gg ve ba r H Free Em BE LT ERR E ALE PR EES GK resa eee ep Ke Terre Tn e K E n K K beer Ss e leelo lia ni in Air jc Arado pre pr gr a Femmes e ze Wem er TRS E W ee rg hm r m oe Deeg e ven bo match poi rezed Fg ajea F C7 Laser Uer i mi H 42 4 Click Properties in the Monitor tab If the Properties
7. button is deactivated it means the configuration for your monitor is completed The monitor can be used as is If the message Windows needs is displayed as shown in the figure below click Continue Mogale Tree A Gerena ET Maros Marine DERE Sper refresh rate Men d Og even al Ei yap ran akr morto cannot de r cored ty Thee ty kel to on urnasble depa ele Gang b Ze p Continue Cancel 5 Click Update Driver in the Driver tab Ta ves Giada cul Fa Zeg aa To 0508 Eu Zeg Kera io Do dira E Be Zeen ten ge re Be zp rali S ch rof egen Sr Cie Greg Diana ha pia dereen Te re d Ea deeg dro 6 Check the Browse my computer for driver software checkbox and click Let me pick from a list of device drivers on my computer n i E gece Bed Greet A pn PAS AT fra ie dom han ra an SH teg Lel ove peck kon a bu of dese dever Ge my computer Tt fel d keen rra rere Dies root die elt Te dern r rl d rre wage HE E 7 Click on the Have disk button then click on the Browse button and then select the appropriate drive F Driver CD ROM Drive 8 Select your monitor model and click on the Next button 9 Click Close Close OK OK on the following screens displayed in sequence 43 Windows XP 1 Start Windows XP 2 Click on the Start button and then click on Control Panel A 1 r serret A Pie Dro ane a Prs Brea ret Cs p
8. following subsections describe notational conventions used in this document Notes Cautions and Warnings Throughout this guide blocks of text may be accompanied by an icon and printed in bold type or in italic type These blocks are notes cautions and warnings and they are used as follows NOTE A NOTE indicates important information that helps you make better use of your computer system For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces Zi CAUTION A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem AA WARNING A WARNING indicates the potential for bodily harm and tells you how to avoid the problem Some warnings may appear in alternate formats and may be unaccompanied by an icon In such cases the specific presentation of the warning is mandated by regulatory authority Power Al Tre monitor should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home consult your dealer or local power company Aa the monitor is equipped with a three pronged grounded plug a plug with a third grounding pin This plug will fit only into a grounded power outlet as a safety feature If your outlet does not accommodate the three wire plug have an electrician install the
9. procedure Follow these steps 1 Remove the base and stand 2 Follow the manufacturer s instructions to assemble the wall mounting arm 3 Place the wall mounting arm onto the back of the monitor Line up the holes of the arm with the holes in the back of the monitor 4 Insert the 4 screws into the holes and tighten 5 Reconnect the cables Refer to the user s manual that came with the optional wall mounting arm for instructions on attaching it to the wall Noted VESA mounting screw holes are not available for all models please check with the dealer or official department of AOC 13 Adjusting Setting Optimal Resolution Windows Vista For Windows Vista 1 Click START 2 Click CONTROL PANEL D Leer edi prea a Pad ed ee ool rg ae Fis Toe E KE BS mi m i pa SE am 71 ESA p P a we Dr EE i me sli H Like eP Sie Son lt j Dem Se rs o TO dia ira R 14 5 Click Display Settings Seen NA La gt eS ee Tee kee Be poin gd erh d rn pri FR Pen E Leem ez reem eee mm resp e read pm Eer Ca RE EN Zeg EN R o AE P A Lai FAR mp game PP ee en ee ee H gie fe rm ee bg SW Tree vvh A KI AE SS e de Ey EE gei Lo a Eni Ey R E a herm ter pie A r E IP fm ee A EE DI PR EE A AE E AAA ee pi E E Pea TE er ie WE e A E 1 x an BW N aiai rra A Rais Pez dedo e Ra PA ri mo Deng tte wera t mich erp menor 1 Lin Mons an MAA Ge AA
10. 7 2 Click on the Start button and then click on Control Panel aoc Documents Pictures Music Games Computer Control Panel Devices and Printers Default Programs Help and Support Shut down 3 Click on the Display icon KK 3 Control Parei Y AN Control Pane ben gt t v e 4 a D E a Y o N gt di EN L D D A L Ki A il DI a Pe ty e 38 4 Ckick on the Change display settings button Control Poet gt Ap Control Panel Bart 5 Click the Advanced Settings button Como Panel Al Coop Panel Dems gt Display Scwen Resoiuion SGH PET L Nedis Crie fet Pare gt 1920 1080 recorrenerstet 6 Click the Monitor tab and then click the Properties button Adapter Monitor Troubleshoot Color Management 2 GeForce 9100M G Monitor Type Genenc PoP Monitor Monitor Settings Screen refresh rate Sep Colors True Color 32 bit 39 7 Click the Driver tab Genene PnP Mondor Driver Provider Microsoft Driver Dale 6 21 2006 Driver Version 617600 16385 Digital Signer Microsoft Windows To view details about the diver files To update the driver sofware for ihis device Ehe device fails after updating the driver roll back to the previously installed driver Disables the selected devita To uninstall the driver Advanced 8 Open the Update Driver Sof
11. Zeen d 1 E kg PA E rd Ers PAR K r presa Uer shine Cra tha ees 6 Set the resolution SLIDE BAR to 1920 by 1080 15 Windows XP For Windows XP 1 Click START Di Dede ria er k ng Datura Prs Bri ret Caplorer GE vi lori R nz la vun L Py B sse eent re rauen s K Outlook Capra o gt Pele Briten a er 10 0 Es Fis Pelee Leg Moko pod i Pere H cum peu zw fa imi Si help and Support pa Deech su 14 wad crap Mero Fale i E gun ali Programa gt 2 Click SETTINGS 3 Click CONTROL PANEL 4 Click Appearance and Themes LE Calle T LI B ad P 5 dl er omer ira p DE EE E E Esla a 5 Double click DISPLAY 16 6 Click SETTINGS 7 Set the resolution SLIDE BAR to 1920 by 1080 Display Pa arpon ties ___ Tam Ri Cia H SI el KE een Lelli LELE A C BL Kb ELSE H K E E A T r j L cda pass FA gem 32 ba 1074 by 760 pinale ttn 1 EF E WS cance Windows ME 2000 For Windows ME 2000 1 Click START 2 Click SETTINGS 3 Click CONTROL PANEL 4 Double click DISPLAY 5 Click SETTINGS 6 Set the resolution SLIDE BAR to 1920 by 1080 17 Hotkeys Auto Source Exit Volume 4 3 or wide Menu Enter Power Power Press the Power button to turn On off the monitor Volume When there is no OSD press Volume to active volume adjustment bar press or to adjust volume 4 3 or wide image ratio When there i
12. alling the e Saver software follow the install wizard to complete software installation Under each of the four PC status you may choose from the pull down menu the desired time in minutes for your monitor to automatically shutdown The example above illustrated 1 The monitor will never shutdown when the PC is powered on 2 The monitor will automatically shutdown 5 minutes after the PC is powered off 3 The monitor will automatically shutdown 10 minutes after the PC is in sleep stand by mode 4 The monitor will automatically shutdown 20 minutes after the screen saver appears When PC On Sleep MEMO HA Never AM After 5 minutes SH After 10 minutes MN You can click RESET to set the e Saver to its default settings like below When PC On Sleep Screen Saver JEE Never AMANI aer Sminutes E After 10 minutes AN After 20 minutes E E 49 Screen Screen software is a desktop screen splitting tool it splits the desktop into different panes each pane displays a different window You only need to drag the window to a corresponding pane when you want to access it lt supports multiple monitor display to make your task easier Please follow the installation software to install it db dd WE 50 Troubleshoot Problem amp Question Power LED Is Not ON No images on the screen Picture Is Fuzzy amp Has Ghosting Shadowing Problem Picture Bounces Flickers Or Wave Pattern Appears In The Picture
13. ard Welcome to the Hardware Update Wizard Tiha mirad ek por install wal lor Plug arl Play Mordor 2 IF pour hardwace came with an installation CD SECH n llo disk mint d use What do poi sand Hee wars lo do CH lroad Ge fra toma Pieccereerekedl EN diria rn aka og precio Ke ra advanced Dick Het lo continue 9 Select the Don t Search will choose the driver to install radio button Then click on the Next button Hardware Update Wizard este choca vos rparch and inzlallation opines Zesch boy the best draa e Pese ka Sien Use the Check Free leka Eo kd o ee the dei alt each bach rchier local palha af Mervarrabde seda The beit reg lound val be ralaled Gei Dom search wal choose the disse bo vitali Choose the option lo select the desce dree hom a kt uree oer not gusiandss that the dreer pou choca vel ba ha bari match for pour ha agem 027 10 Click on the Have disk button then click on the Browse button and then select the appropriate drive F CD ROM Drive E Wizard Selec the devine diyer pi sand La mst all lcs thin hardware Soles the mr ridicia and model dl pos bake dente el then ckk Masi H war have a dal that contara the diver pos sant io raind ck Hera Dink Id Pres gompatbla Phare PA Ds W i sed Dia cria Sch Tr dirsi rz ep su ire lel ma win dra mpna gi 11 Click on the Open button then click the Ok button 12 Select your monitor model and click on the Nex
14. art button point to Settings and then click on Control Panel Double click on the Display Icon Select the Settings tab then click on Advanced Select the Monitor button then click on Change button Select Specify the location of the driver Advanced and click on the Next button N DO dl SAI N gt Select Display a list of all the drivers in a specific location so you can choose the driver you want then click on Next and then click on Have Disk 8 Click on the Browse button select the appropriate drive F CD ROM Drive then click on the Ok button 9 Click on the Ok button select your monitor model and click on the Next button 10 Click on Finish button then the Close button 47 i Menu E kg Welcome to Menu software by AOC i Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor To complete installation please follow the installation guide A Contrast pin 50 a Brightnoss Gamma 4 Gamma i EcoMode E DCR Ef 48 e Saver Welcome to use AOC e Saver monitor power management software The AOC e Saver features Smart Shutdown functions for your monitors allows your monitor to timely shutdown when PC unit is at any status On Off Sleep or Screen Saver the actual shutdown time depends on your preferences see example below Please click on driver e Saver setup exe to start inst
15. ay Color 16 7M Colors Dot Clock 210 MHZ Input Video Signal Analog 0 7Vp p standard 75 OHM Positive 19 pin HDMI amp DVI D Digital Interface TMDS Active lt 70 W Power Consumption Standby lt 2 W TN HT Be bel Operating 5 to 85 non condensing Non Operating Fo to 90 non condensing 53 Operating 0 3 658m 0 12 000 ft Non Operating O 12 192m 0 40 000 ft Preset Display Modes STANDARD RESOLUTION HORIZONTAL VERTICAL FREQUENCY KHz FREQUENCY Hz KEE RECHERCHER mae em es masr eas em aoan Tam ms aasre o q CE 0528 saos REO ez 1 ms eweeese aaen 31469 70067 _ 54 Pin Assignments SS A ED Moo AA AAA EP A seno SS e d AAA dE EE vo rr OR CO lt D GE e RK 15 PDC Serial clock 1 2 3 5 7 10 11 12 13 14 15 TO posse EE bm AN SE 7 N C dle a Ja dum E 55 FU UU RR Wi oan AAA al Sen Sign Name Pinno Signa me Pane Signal me 1 fwosoraz o fuosmamo s7_ pocioec cra _ A E e 5 TMDS Data 1Shield Data 1Shield E TT Data 1 EE N C on SC 7 TMDSData0 Data 0 Plug and Play Plug amp Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD It allows the monitor to inform the host system of its identity and depending on the level of DDC used communicate additional information about its display ca
16. correct outlet or use an adapter to ground the appliance safely Do not defeat the safety purpose of the grounded plug AM Unplug the unit during a lightning storm or when it will not be used for long periods of time This will protect the monitor from damage due to power surges AA vo not overload power strips and extension cords Overloading can result in fire or electric shock Ato ensure satisfactory operation use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 240V AC Min 5A F the wall socket shall be installed near the equipment and shall be easily accessible dl For use only with the attached power adapter Output 12Vdc which have UL CSA listed license Only for monitors with power adapter Installation AA do not place the monitor on an unstable cart stand tripod bracket or table If the monitor falls it can injure a person and cause serious damage to this product Use only a cart stand tripod bracket or table recommended by the manufacturer or sold with this product Follow the manufacturer s instructions when installing the product and use mounting accessories recommended by the manufacturer A product and cart combination should be moved with care A Never push any object into the slot on the monitor cabinet It could damage circuit parts causing a fire or electric shock Never spill liquids on the monitor Addo not place the front of the product on
17. ct a OSD Setup and press MENU to enter Press or to select submenu press MENU to enter and press or to adjust Press AUTO to exit 30 Adjust the horizontal position of H Position 0 100 OSD 0 100 Adjust the vertical position of OSD 5 120 Adjust the OSD Timeout 0 100 Adjust the transparence of OSD 31 Extra Press MENU Menu to display menu A e Press or to select ON OSD Setup and press MENU to enter Press or to select submenu press MENU to enter and press or to adjust Press AUTO to exit 32 Select to Auto Detect input signal Input Select Select Analog Signal Source as Input HDMI Select HDMI Source as Input d Auto Config Auto adjust the picture to default PN Image Ratio Select wide or 4 3 format for display DDC CI Turn ON OFF DDC CI Support Off Timer 0 24hours Select timing to turn off the monitor Show the infor mation of the main ima ge and Information l sub image source 33 Reset Press MENU Menu to display menu Press or to select wad Reset and press MENU to enter Press or to select YES or NO Press AUTO to exit 34 yes or no Reset the menu to default 35 Exit Press MENU Menu to display menu gt Press or toselect Exit and press MENU to exit Exit the main OSD 36 LED Indicator 37 Driver Monitor Driver Windows 7 1 Start Windows
18. ebuilt parts or replace it with a new or rebuilt product at no charge except as stated below The defective products that are replaced become the property of AOC International Europe GmbH If the product appears to be defective please contact your local dealer or refer to the warranty card when attached to the product Deliver the product freight pre paid along with the dated proof of purchase to the AOC Authorized Service Center If you cannot deliver the product in person Pack it in its original shipping container or equivalent Put the RMA number on the address label Put the RMA number on the shipping carton Insure it or assume the risk of loss damage during shipment Pay all shipping charges AOC International Europe GmbH is responsible neither for any damage or loss during inbound transport damage nor to inbound product that was not properly packaged AOC International Europe GmbH will pay the return shipping charges within one of the countries specified within this warranty statement AOC International Europe GmbH is not responsible for any costs associated with the transportation of product across international borders This includes the international border within the European Union This limited warranty does not cover any losses or damages that occur as a result of Shipping or improper installation or maintenance Misuse Neglect Any cause other than ordinary commercial or industrial app
19. echnology affordable price and available service Customer satisfaction oriented is always what we are pursuing We provide 3 years standard warranty for AOC monitor and 1 3 years standard warranty for AOC TV However There is some slight warranty difference due to AOC different service strategic in different area country so any question against warranty or any other AOC products warranty please leave the message via service support aoc com or check with the dealer or reseller in your country where you bought the product We will response to you with top priority AOC warrants this product to be free from defects in material and workmanship During the warranty period TPV will at its option either repair the defective product with new or rebuilt parts or replace it with a new or rebuilt product at no charge except as stated below The defective products that are replaced become the property of AOC e This limited warranty does not cover any losses or damages that occur as a result of e Shipping or improper installation or maintenance e Misuse or Neglect e Any cause other than ordinary application e Adjustment by non authorized source e Repair modification or installation of options or parts by anyone other than an AOC Authorized Service Center e Improper environment Excessive or inadequate heating or air conditioning or electrical powers failures surges or other irregularities e Fire flood earthquake terrorist attack or ot
20. ginal shipping container or equivalent Put the RMA number on the address label Put the RMA number on the shipping carton Insure it or assume the risk of loss damage during shipment Pay all shipping charges EPI is not responsible for damage to inbound product that was not properly packaged EPI will pay the return shipment charges within one of the countries specified within this warranty statement EPI is not responsible for any costs associated with the transportation of product across international borders This includes the international borders of the countries within this warranty statements In the United States and Canada contact your Dealer or EPI Customer Service RMA Department at the toll free number 888 662 9888 Or you can request an RMA Number online at www aoc com na warranty This limited warranty does not cover any losses or damages that occur as a result of Shipping or improper installation or maintenance Misuse Neglect Any cause other than ordinary commercial or industrial application Adjustment by non authorized source Repair modification or installation of options or parts by anyone other than an EPI Authorized Service Center Improper environment Excessive or inadequate heating or air conditioning or electrical power failures surges or other irregularities This three year limited warranty does not cover any of the product s firmware or hardware that you or any third party
21. have modified or altered you bear the sole responsibility and liability for any such modification or alteration 62 ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO A PERIOD OF THREE 3 YEARS FOR PARTS AND LABOR AND ONE 1 YEAR FOR CRT TUBE OR LCD PANEL FROM THE ORIGINAL DATE OF CONSUMER PURCHASE NO WARRANTIES EITHER EXPRESSED OR IMPLIED APPLY AFTER THIS PERIOD IN THE UNITED STATES OF AMERICA SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU EPI OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HERE EPI LIABILITY WHETHER BASED ON CONTRACT TORT WARRANTY STRICT LIABILITY OR OTHER THEORY SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM INNO EVENT SHALL ENVISION PERIPHERALS INC BE LIABLE FOR ANY LOSS OF PROFITS LOSS OF USE OR FACILITIES OR EQUIPMENT OR OTHER INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGE IN THE UNITED STATES OF AMERICA SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE In the United States of America this limited warranty is only valid for Produc
22. her accidents This limited warranty does not cover any of the product firmware or hardware that you or any third party have modified or altered customer bear the sole responsibility and liability for any such modification or alteration It s the right of AOC to issue or terminate the warranty terms For exception cases subject to report of our investigation we reserve the right to terminate or modify terms of warranty policy How to get your Warranty 1 Please keep the purchase invoice and our service partner will take over the service against the invoice 2 Ifyou can not show the invoice please contact local dealer reseller for getting special support 64
23. ical devices that may cause electrical interference as far away from the monitor as possible Use the maximum refresh rate your monitor is capable of at the resolution your are using 51 Monitor Is Stuck In Active Off Mode Missing one of the primary colors RED GREEN or BLUE Screen image is not centered or sized properly Picture has color defects white does not look white Horizontal or vertical disturbances on the screen The Computer Power Switch should be in the ON position The Computer Video Card should be snugly fitted in its slot Make sure the monitor s video cable is properly connected to the computer Inspect the monitor s video cable and make sure no pin is bent Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED The LED should either turn ON or OFF after hitting the CAPS LOCK key Inspect the monitor s video cable and make sure that no pin is damaged Make sure the monitor s video cable is properly connected to the computer Adjust H Position and V Position or press hot key AUTO Adjust RGB color or select desired color temperature Use Windows 95 98 2000 ME XP shut down mode Adjust CLOCK and FOCUS Press to auto adjust 52 Specification General Specification Viewable Image Size 68 6cm diagoanl Pixel pitch O34 1mm H x 0 311mm V Panel e R G B Analog Interface Separate Sync H V TTL Displ
24. jojofe e e el laei JO la a mm a D mja Y AS e 4 1 Power 2 Audio 3 Analog DB 15 VGA cable 4 DVI 5 HDMI 6 USB 7 Earphone To protect equipment always turn off the PC and LCD monitor before connecting 1 Connect the power cable to the AC port on the back of the monitor 2 Connect the audio cable to audio in port on the back of the monitor 3 Connect one end of the 15 pin D Sub cable to the back of the monitor and connect the other end to the computer s D Sub port 4 Optional Requires a video card with DVI port Connect one end of the DVI cable to the back of the monitor and connect the other end to the Computers DVI port 5 Optional Requires a video card with HDMI port Connect one end of the HDMI cable to the back of the monitor and connect the other end to the computer s HDMI port 6 Optional Requires a video card with USB port Connect one end of the USB cable to the back of the monitor and connect the other end to the computer s USB port 7 Optional Requires a Earphone Connect the earphone cable to earphone in port on the back of the monitor 8 Turn on your monitor and computer If your monitor displays an image installation is complete If it does not display an image please refer Troubleshooting 12 Wall Mounting Preparing to Install An Optional Wall Mounting Arm This monitor can be attached to a wall mounting arm you purchase separately Disconnect power before this
25. le er Sat Erk Ee Py eet ocean F Es Paige Pees Sith Empresa Ple Ri Se rene Zen bb Ge O d fr he EA ell ir oa Fr Dair free ape eel Te Co Sal a br Ey eni area Y q AS A AS 4 Click on the Display Item i ke g iaia id h Br 8 TR LETTE a Be op LIA eem E E Es 44 5 Select the Settings tab then click on the Advanced button Display Parar peer lins Display Poy med Pos Hire ms Hr Propia ijj A Earn cl ge Ki e we 6 Select Monitor tab If the Properties button is inactive it means your monitor is properly configured Please stop installation If the Properties button is active click on Properties button Please follow the steps below Mee ngile Semen obra nata BO Hentz Plugy ami bay Mornilor Pro pati Lire L Plug an Play Monitor Pio pur lies Fhag and Flap Mordor nena Diver Dawca hpe Maracas a o Heer minia Age Drives Provider Microsoft Lo au on 30 Prophet 111 rees Dato 602001 Din trai d Diveg Ve pane 5 1 2001 0 aen are having problems with thir device chek Troubleshoot to alan na cable To ra abet ad air Bw hres Mea To paia en kren Bs ez der ihe dese Lado alter tha diras roll back bo le piero mun ES Laws Ve imicin Torah a A Hun dree advanced 45 8 Select the Install from a list or specific location advanced radio button and then click on the Next button Hardware Update Wiz
26. lication Adjustment by non authorized source Repair modification or installation of options or parts by anyone other than an AOC Authorized Service Center Improper environment Excessive or inadequate heating or air conditioning or electrical powers failures surges or other irregularities This limited warranty does not cover any of the product firmware or hardware that you or any third party have 60 modified or altered you bear the sole responsibility and liability for any such modification or alteration ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO A PERIOD OF THREE 3 YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER PURCHASE NO WARRANTIES EITHER EXPRESSED OR IMPLIED APPLY AFTER THIS PERIOD AOC INTERNATIONAL EUROPE GMBH OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HERE AOC INTERNATIONAL EUROPE GMBH LIABILITY WHETHER BASED ON CONTRACT TORT WARRANTY STRICT LIABILITY OR OTHER THEORY SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM IN NO EVENT SHALL AOC INTERNATIONAL EUROPE GMBH BE LIABLE FOR ANY LOSS OF PROFITS LOSS OF USE OR FACILITIES OR EQUIPMENT OR OTHER INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE
27. onmental attributes EPEAT also provides a clear and consistent set of performance criteria for the design of products and provides an opportunity for manufacturers to secure market recognition for efforts to reduce the environmental impact of its products AOC believes in protecting the environment With a key concern for the conservation of natural resources as well as land Il protection AOC announces the launch of AOC monitor s packaging recycling program This program is designed to help you discard of your monitor carton and ller materials properly If a local recycling center is not available AOC will recycle the packaging material for you including foam ller and carton AOC Display solution will only recycle AOC monitor packaging Please refer to the following website address Only for North and South American excluding Brazil http us aoc com about environmental_impact For Germany http www aoc europe com en service tco php For Brazil http www aoc com br 2007 php index php req pagina amp pgn_id 134 59 Service Warranty Statement for Europe LIMITED THREE YEAR WARRANTY AOC Color Monitors sold within Europe AOC International Europe GmbH warrants this product to be free from defects in material and workmanship for a period of Three 3 years after the original date of consumer purchase During this period AOC International Europe GmbH will at its option either repair the defective product with new or r
28. pabilities The DDC2B is a bi directional data channel based on the I2C protocol The host can request EDID information over the DDC2B channel 56 Regulation FCC Notice FCC Class B Radio Frequency Interference Statement WARNING FOR FCC CERTIFIED MODELS NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help NOTICE The changes or modifications not expressly approved by the party responsible for compliance could void the user s authori
29. s no OSD press hotkey continuously to change 4 3 or wide image ratio If the product screen size is 4 3 or input signal resolution is wide format the hot key is disable to adjust Auto Exit When the OSD is closed press Auto button will be auto configure hot key function Source hot key When the OSD is closed press Source button will be Source hot key function Press Source button continuously to select the input source showed in the message bar press Menu Enter button to change to the source selected OSD Setting Basic and simple instruction on the control keys 1 Press the MENU button to activate the OSD window 2 Press or to navigate through the functions Once the desired function is highlighted press the MENU button to activate sub menu Once the desired function is highlighted press MENU button to activate it 3 Press or to change the settings of the selected function Press or to select another function in sub menu Press AUTO to exit If you want to adjust any other function repeat steps 2 3 4 OSD Lock Function To lock the OSD press and hold the MENU button while the monitor is off and then press power button to turn the monitor on To un lock the OSD press and hold the MENU button while the monitor is off and then press power button to turn the monitor on Notes 1 If the product has only one signal input the item of Input Select is disable to adjust 2 If the product screen si
30. t button If you can see the has not passed Windows Logo testing to verify its compatibility with Windows XP message please click on the Continue Anyway button 13 Click on the Finish button then the Close button 14 Click on the OK button and then the OK button again to close the Display Properties dialog box 46 Windows 2000 1 Start Windows 2000 2 Click on the Start button point to Settings and then click on Control Panel 3 Double click on the Display Icon 4 Select the Settings tab then click on Advanced 5 Select Monitor If the Properties button is inactive it means your monitor is properly configured Please stop installation If the Properties button is active Click on Properties button Please follow the steps given below 6 Click on Driver and then click on Update Driver then click on the Next button 7 Select Display a list of the known drivers for this device so that can choose a specific driver then click on Next and then click on Have dek 8 Click on the Browse button then select the appropriate drive F CD ROM Drive 9 Click on the Open button then click on the OK button 10 Select your monitor model and click on the Next button 11 Click on the Finish button then the Close button If you can see the Digital Signature Not Found window click on the Yes button Windows ME Start Windows Me Click on the St
31. the floor A If you mount the monitor on a wall or shelf use a mounting kit approved by the manufacturer and follow the kit instructions MA cave some space around the monitor as shown below Otherwise air circulation may be inadequate hence overheating may cause a fire or damage to the monitor See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the stand Installed on the wall 11 718 inches d Jem l o 7 d FL 4 inches 4 inches 10cm j 10cm L A qu Leave at least this space around the set h A 4 inches Oem installed with stand 11 7 8 inches Alem A inches __ 4 inches 4 inches kiant em fem y NE Leave at least this space around the set 4 Cleaning A cican the cabinet regularly with the cloth provided You can use soft detergent to wipe out the stain instead of strong detergent which will cauterize the product cabinet AN when cleaning make sure no detergent is leaked into the product The cleaning cloth should not be too rough as it will scratch the screen surface AN Please disconnect the power cord before cleaning the product Other Ar the product is emitting a strange smell sound or smoke disconnect the power plug IMMEDIATELY and contact a Service Center LI Make sure that the ventilating openings are not blocked by a table or curtain
32. ts purchased in the Continental United States Alaska and Hawaii Outside the United States of America this limited warranty is only valid for Products purchased in Canada Information in this document is subject to change without notice For more details please visit USA http us aoc com supportfind service center ARGENTINA http ar aoc com support find service center BOLIVIA http bo aoc com support find service center CHILE http cl aoc com support ffind service center COLOMBIA http co aoc com support find service center COSTA RICA http craoc com support find service center DOMINICAN REPUBLIC http do aoc com support find service center ECUADOR http ec aoc com support find service center EL SALVADOR http sv aoc com support find service center GUATEMALA http gt aoc com support find service center HONDURAS http hn aoc com supportfind service center NICARAGUA http niiaoc com support find service center PANAMA http pa aoc com support find service center PARAGUAY http py aoc com support find service center PERU http pe aoc com supportfind service center URUGUAY http pe aoc com supportfind service center VENEZUELA http ve aoc com support find service center IF COUNTRY NOT LISTED h tp llatin aoc com supportfind service center 63 Warranty Statement for AP LIMITED THREE YEAR WARRANTY AOC Color Monitors sold within AP AOC is one internal brand for its professional monitor TV t
33. tware Generic PnP Monitor window by clicking on Update Driver and then click the Browse my computer for driver software button How do you want to search for driver software gt Search automatically for updated driver software Windows will search your computer and the Internet for the latest driver software for your device unless you ve disabled this feature in your device installation settings Browse my computer for driver software Locate and install driver software manually 9 Select Let me pick from a list of device drivers on my computer Browse for driver software on your computer Search for driver software in this location D Drivers Touch device Browse Y Include subfolders Let me pick from a list of device drivers on my computer This list will show installed driver software compatible with the device and all driver software in the same category as the device 40 10 Click the Have Disk button Click on the Browse button and navigate to the following directory X Driver module name where X is the drive letter designator for the CD ROM drive Insert the manufacturer s installabon disk and then make sure that he correct drive is selected below Copy manufacturer s files from FDrivers e936Vw Tell me why driver signing is important Cancel 11 Select the xxx inf file and click the Open button Click the OK button 12
34. ty to operate the equipment Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment It is the responsibilities of the user to correct such interference It is the responsibility of the user to correct such interference 57 WEEE Declaration Disposal of Waste Equipment by Users in Private Household in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste Instead it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment For more information about where you can drop off your waste equipment for recycling please contact your local city office your household waste disposal service or the shop where you purchased the product 58 EPEAT Declaration De Y e GOLD EPEAT is a system to help purchasers in the public and private sectors evaluate compare and select desktop computers notebooks and monitors based on their envir
35. ze is 4 3 or input signal resolution is wide format the item of Image Ratio is disable to adjust 3 One of DCR Color Boost and Picture Boost functions is active the other two function is turned off accordingly 19 Luminance Press MENU Menu to display menu Press or to ceu RA Luminance and press MENU to enter Press or to select submenu press MENU to enter and press or to adjust Press AUTO to exit 20 Brightness 0 100 Backlight Adjustment 0 100 Contrast from Digital register Standard Standard Mode Eco mode Internet e Internet Mode PI Game q Game Mode Q Ve Sports Mode Ex Disable dynamic contrast ratio Enable dynamic contrast ratio 21 Image Setup Press MENU Menu to display menu Press or to select AA Image Setup and press MENU to enter Press or to select submenu press MENU to enter and press or to adjust Press AUTO to exit 22 Adjust picture Clock to reduce Vertical Line noise Adjust Picture Phase to reduce Horizontal Line noise Adjust the horizontal position of the H Position picture Adjust the vertical position of the V Position picture 23 Color Temperature Press MENU Menu to display menu Press or to select e Color Temperature and press MENU to enter Press or to select submenu press MENU to enter and press or to adjust Press AUTO to exit
Download Pdf Manuals
Related Search