Home

HXE-11

1. can be purchased at www audioauthority com or through authorized dealers 1 1 SYSTEM FEATURES Requires only one BNC terminated coax cable RG 6 or RG 59 e Quick synchronization means maximum up time e Installation is plug and play no complex setup routines or programming e Multiple receivers may be cascaded from one transmitter e Supports 720p 1080i and 1080p resolutions Up to 200 ft cable length using RG 6 with 1080p and lossless audio Up to 300 ft cable length using RG 6 with 1080i 720p with lossless audio e HDMI version 1 3 and HDCP compliant 1 2 HDMI VERSION 1 3 FEATURES SUPPORTED e 1080p 60 and 1080p 24 video e 1080i and 720p video Lossless bitstream audio Dolby TrueHD DTS HD Master Audio Multichannel LPCM Lip sync compensation 2 0 CHECKING PACKAGE CONTENTS Before connecting the system please make certain the following items are in the shipping cartons Note the 1341T and 1341R are sold separately Note Please retain the original packing material 1341T Transmitter and invoice in case you need to return the unit and or 1341R Receiver If you find any items are missing contact Audio Authority immediately Have the model number and e 5V DC power adapter s invoice available for reference when you call User manual 3 0 SYSTEM DESIGN Consider the following factors and basic precautions to ensure the best possible performance e Do not use soldered BNC connectors Coaxia
2. AC outlets and check the power indicators on all units Connect the display device directly to the source using the HDMI cable from the 1341T end then test with the 1341R connection cable If an image is present under those circumstances then the display the source and the HDMI cables can be eliminated as the cause of the problem If the above methods do not produce a picture test using a short known good HDMI cable and set up the source to output a resolution that the display can accept If this test is successful connect the HXE 11 System again making sure the source resolution is the same as the test Contact Audio Authority Technical Service at support audioauthority com or call 800 322 8346 or 859 233 4599 7 0 SPECIFICATIONS DIGITAL AUDIOWIDEOVO cowxArcowEcraamg voeo Perrormance Maximum RG 6 cable length 200 ft 90m with 1080p lossless audio 300 ft 60m with 1080i lossless audio 300 ft 60m with 720p lossless audio FAUDIOPERFORMANCE ENVIRONMENTAL 0 to 50 C 32 to 122 F 10 to 90 Non condensing 10 to 70 C 12 to 158 F 10 to 90 non condensing FREGULATORVAPPROVALS FCABLEREQUIREMENTS MECHANICAL FACCESSORIESINCLUDED WARRANTY rr 8 0 LIMITED WARRANTY If any consumer product from Audio Authority fails due to defects in materials or workmanship within one year from the date of the original sale to the end user Audio Authority guarantees
3. User Manual Homi Video Distribution System AudioGP Authority 800 322 8346 859 233 4599 www audioauthority com Digital Video Single Coax Extender of Pauthority 359 233 4599 www audioauthority com Model 1341T jeo Single Coax Extender TRANSMITTER Model 1341R RECEIVER Home zem Homi Models 1341T and 1341R HXE 11 Kit AudioGpAuthority Audio authority 2048 Mercer Road Lexington Kentucky 40511 1071 Phone 859 233 4599 Fax 859 233 4510 Customer Toll Free USA amp Canada 800 322 8346 www audioauthority com WARNINGS e Read these instructions before installing or using this product To reduce the risk of fire or electric shock do not expose this unit to rain or mois ture This product must be installed by qualified personnel Do not open the cover there are no user serviceable parts inside Do not expose this unit to excessive heat Install only in dry indoor locations Clean the unit only with a dry or slightly dampened soft cloth LIABILITY STATEMENT Every effort has been made to ensure that this product is free of defects Audio Authority cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use It is the responsibility of the user of the hardware to check that it is suitable for his her requirements and that it is installed correctly All rights are reserved No parts of this manual may be re
4. cer Road Lexington Kentucky 40511 1071 Phone 859 233 4599 Fax 859 233 4510 Customer Toll Free USA amp Canada 800 322 8346 www audioauthority com E 096 7 10
5. ery high electromagnetic fields that can interfere with the performance of nearby video equipment The 1341T and 1341R may be used in simple point to point applications or in multiple destination video distribution applications Point to point Extension Application SOURCE 1341R RG 6 OR RG 59 Point to point Distribution Application SOURCE NOTE AC POWER CONNECTIONS ARE HDTV 7 NOT SHOWN 1341R HDTV B 1341R RG 6 OR RG 59 RG 6 OR RG 59 RG 6 OR RG 59 4 0 CABLE LENGTH AND FABRICATION Maximum cable length depends on total bandwidth video resolution plus audio Use the table below as a guide but test the actual cable length with the target source and TV before installation 1080p lossless audio 1080i lossless audio 720p lossless audio Up to 200 ft Up to 300 ft Up to 300 ft RG 59 Up to 120 ft Up to 200 ft Up to 200 ft Do not solder BNC connectors use only crimp on or compression type terminations on coaxial cables Do not bend coaxial cables beyond the manufacturer s recommended radius RG 59 cable may be used over shorter cable lengths or lower bandwidth requirements test each application before permanent installation 5 0 INSTALLATION Connect coaxial cables and HDMI cables first then connect power supplies Use good strain relief methods on HDMI cables to prevent loose connections and po
6. l be issued for the return of the defective product Replacement units are sent out at the Manufacturer s Suggested Retail Price which is debited to the Customer s Credit Card at the time of shipment Once we receive the defective unit back at the factory it will be evaluated under the conditions of this warranty and if found to be in warranty a full credit will be issued to the Customer s Credit Card Return freight charges for the defective unit are the customer s responsibility Please contact our Technical Service Department for complete details concerning all in and out of warranty service matters We appreciate your confidence in our products and services and will always strive to meet or exceed your needs 10 9 0 REGULATORY COMPLIANCE The 1341T and 1341R comply with HDMI and HDCP rules and regulations Power supplies included have been tested for compliance with UL CUL CE PSE and GS rules and guidelines This product and its power supply are ROHS compliant 10 0 CONTACT INFORMATION If you have questions or require assistance with this product in areas not covered by this manual please contact Audio Authority using the information below Audio Authority Technical Service 800 322 8346 M F 8 30 AM to 5 00 PM EST International 859 233 4599 Fax 859 233 4510 Send email to support audioauthority com Audio Authority Corporation 2048 Mercer Road Lexington Kentucky 40511 1071 USA 11 AudiogbAuthority 2048 Mer
7. l cables MUST be terminated with either crimp on or compression type BNC connectors e Resolution tracking for multiple displays Set up the source to output the best resolution that all TVs are capable of displaying The HXE 11 Series supports 720p 1080i and 1080p If some TVs in the network are not capable of accepting 1080p the higher resolution sets may not be shown to their best advantage e Source resolution and video sound quality Sources such as satellite receivers or cable boxes can output at low resolutions or deliver extremely compressed video material yielding poor results Consider the source when planning and troubleshooting your system e Display devices The perceived quality of the video image depends heavily upon the type and quality of the TVs or projectors used High quality displays should be expected to produce a noticeably better image e Distance between the transmitter and the receiver Long distances are possible but premium quality cables are necessary for the longest runs RG 6 provides superior results but RG 59 may be used in shorter distance applications e Source and TV connection cables Use short premium HDMI cables low quality cables are often unreliable Always use good strain relief methods or locking cables to prevent cables from becoming loose over time e Interference from nearby electrical devices can have an adverse effect on signal quality For example older computer monitors often emit v
8. produced or transmitted by any form or means electronic or mechanical including photocopying recording or by any information storage or retrieval system without the written consent of the publisher Audio Authority reserves the right to revise any of its hardware and software following its policy to modify and or improve its products where necessary or desirable Audio Authority and the Double A Symbol are registered trademarks of Audio Authority Corp Copyright April 2010 HDMI the HDMI Logo and High Definition Multimedia Interface are registered trademarks of HDMI Licensing LLC in the United States and other countries All other third party trademarks and copyrights are recognized User Manual 1341T and 1341R HDMIS Signal Distribution System Table of Contents 1 0 INTRODUCTION 2 0 CHECKING PACKAGE CONTENTS 3 0 SYSTEM DESIGN 4 0 CABLE LENGTH AND FABRICATION 5 0 INSTALLATION 6 0 TROUBLESHOOTING 7 0 SPECIFICATIONS 8 0 LIMITED WARRANTY 9 0 REGULATORY COMPLIANCE 10 0 CONTACT INFORMATION 1 0 INTRODUCTION Thank you for purchasing this HDMI distribution system from Audio Authority The HXE 11 Kit 1341T and 1341R digitally transmits HDMI signals over a single coax cable to achieve distances many times those possible using an HDMI cable Preserves high quality 1080p video with embedded multi channel audio such as Dolby TrueHD Audio Authority audio video switchers converters and distribution amps
9. that we will replace the defective product at no cost Freight charges for the replacement unit will be paid by Audio Authority ground service only A copy of the invoice showing the item number and date of purchase proof of purchase must be submitted with the defective unit to constitute a valid in warranty claim Units that fail after the warranty period has expired may be returned to the factory for repair at a nominal charge if not damaged beyond the point of repair All freight charges for out of warranty returns for repair are the responsibility of the customer Units returned for repair must have a Return Authorization Number assigned by the factory This is a limited warranty and is not applicable for products which in our opinion have been damaged altered abused misused or improperly installed Audio Authority makes no other warranties either expressed or implied including limitation warranties as to merchantability or fitness for a particular purpose Additionally there are no allowances or credits available for service work or installation performed in the field by the end user 8 1 WARRANTY SERVICE PROCEDURES If you suspect a product defect contact Audio Authority s Technical Service Department at 800 322 8346 or 859 233 4599 for assistance in verifying the problem If a defect or potential defect is suspected a replacement unit will be shipped immediately on a defect exchange basis and a Return Authorization Number wil
10. wer system for final testing CONNECT SOURCE HDMI INPUT POWER POWER 5VDC 1A CONNECT AC POWER ADAPTER RG 6 CABLE UP CASCADE TO TO 300 FT NEXT HDTV POWER TX 5V DC 1A INPUT THROUGH CONNECT HDMI OUTPUT POWER AC POWER O ADAPTER CONNECT TV OR OTHER HDMI DEVICE See page 5 for cable types and distance limitations 7 6 0 TROUBLESHOOTING e Poor image quality Some sources such as cable and satellite receivers compress output resulting in poor image quality Connect the source directly to a display via a short HDMI cable to compare e Intermittent signal dropout Cable is longer than rated distance for the bandwidth of the source signal Reduce bandwidth or cable length e No surround sound multi channel audio adjust the source to output the desired digital audio format and make certain the destination device is capable of receiving it e No picture perform the verifications below e DO NOT use soldered BNC terminations use only crimp or compression type BNC terminations e Use a cable tester to make certain coaxial cables are terminated correctly and the BNC connectors are securely attached to the cable at both ends Check for cable defects or damage Check the HDMI cables at input and output connections to see if any of the connectors have become loose Use good strain relief methods e Make certain 1341T and 1341R units are connected to live

HXE-11

Contents

Download Pdf Manuals

Related Search

Related Contents