Operating Instructions
Contents
1. the energizer O The fence control LED also flashes shortly with each energy impulse and shows the output voltage at the fence connector being above 2000 volts so that animals can be herded If the fence control does not flash then disconnect the fence connection cable from the fence connector of your energizer If the fence control LED now flashes then check your fence in detail Otherwise your energizer is damaged and has to be returned for repair fence control energizer control ground connector connector Safety informations Not following the safety instructions and an incorrect energizer setup could lead to hazard and may cause technical malfunction of the energizer Please observe strictly following items Q Connect your mains energizer GN3000 only to mains voltage 230V AC 50 Hz socket being protected by a ground fault circuit interrupter ground fault current max 30mA Mounting and operating your energizer is only allowed in non flammable area or places Mains protective earth conductor must not be used as fence grounding conductor Fence connections must be established using a lightning protection Always use proper fencing material when using flexible fencing wire Wire of low quality is not recommended and can cause radio or tv interferences Your energizer GN3000 should not be used for herding sensitive animals using short fences Build up your fence solidly Avoid your animals from getting tangled2. Warranty Card Terms of Warranty To your energizer Granit GN3000 we issue warranty for a period of 3 years at following conditions We issue warranty to your energizer GN3000 for a period of 3 years from date of selling at following conditions The selling date has to be proved by this certificate of guarantee which has to be accurately completed by your dealer All deficiencies or damages during this period that can be traced back to faults of material or faults of fabrication will be repaired costless when the device is returned to us prepaid This warranty cannot be issued when the device is being connected to wrong power supply or when it was damaged due to an Act of God e g lightning stroke or water damage It also cannot be issued in any case of unauthorized intervention or maloperation Device Mains Energizer Granit GN3000 Selling date Serial number Dealer stamp signature of dealer To execute repair works please contact your local GRANIT dealer GRANIT QUALITY PARTS p65 86061D_BAL_GN3000_GRANIT_ENGLISCH User manual english version C Mains Energizer GN3000 Order No 580580108 Packing unit 1 mains energizer GN3000 1 warning plate 1 user manual and warranty card GRANIT QUALITY PARTS Mounting Mount the mains energizer Granit GN3000 inside or outside a building ata non flammable place at a wall orin an appropriate housing or case Protect the energizer from water M
3. in your electric fence Check the condition of your fence and your energizer daily Q Check the condition of your fence and your energizer daily OO O O O O
4. ounting installation and first operation must only be performed by a professional electric technician Hit a grounding rod deeply into the ground at a humid place directly nearby your fence Connect the grounding rod to the ground connector of the energizer using an appropriate earthing cable min width 1 5 qmm For connections always use corrosion resistant grounding cable Note that the most performance and output power of your energizer can only be achieved by best grounding and fence isolation conditions Connect your fence and the fence connector of your energizer using high tension connection cable isolated to ground housing and buildings To prevent damages from lightning strokes fence connection must be done by using a lightning protection Connect the mains energizer to mains socket 230V AC 50 Hz Use no other tension or mains frequency The mains socket must be protected by a ground fault circuit interrupter ground fault current max 30mA Should radio or tv interferences appear in spite of correct mounting and connections of the energizer then a faulty fence faulty isolators and wire connections or plants touching the fence should be the reason Examine and check your electric fence in detail Fence control and energizer control The energizer GN3000 has both an integrated fence control and an energizer function control OQ The energizer control LED flashes shortly with each energy impulse and shows correct working of
Download Pdf Manuals
Related Search