Home

q-2 / q-2 w user manual

1. 44 6 Channel Mode 16 bit 3 segments Default DMX Channel DMX value Description DMX percentage value 1 No light gt Left Intensity 0 65535 0 0 100 0 i 0 0 Fade 2 Maximum light 4 Panels No light gt Center Intensity 0 65535 0 0 100 0 i 0 0 Fade Maximum light 4 Panels No light gt Right Intensity 0 65535 0 0 100 0 i 0 0 Fade Maximum light 4 Panels 45 Control menu Level 1 Level 2 Level 3 Function INFO PRODUCT TYPE Displays the device product type FIRMWARE VERSION Displays installed software version number SERIAL NUMBER Displays the device serial number RDM ID Displays the device RDM ID for use with the SGM Tool app DMX VIEW Displays received DMX levels TEMPERATURES Displays device temperatures POWER ON TIME Displays device power on time LOG Displays recorded operating data and error codes SETTINGS FLIP DISPLAY ENABLE Selects normal control panel display DISABLE Flips control panel display 46 Level 1 SETTINGS continued Level 2 Level 3 Function DISPLAY SAVER DISPLAY DIM Dims the OLED display when the control panel is not in use DISPLAY OFF Turns off OLED display when the control panel is not in use FAN MODE STANDARD Adjust fan speed relative to device internal tem perature SILENT Low fan speed for quiet operation M
2. RED Panel 1 0 65535 0 0 100 0 Panel 1 0 0 Fade Maximum RED No GREEN gt GREEN Panel 1 0 65535 0 0 100 0 Panel 1 0 0 Fade Maximum GREEN No BLUE gt BLUE Panel 1 0 65535 0 0 100 0 Panel 1 0 0 Fade 10 Maximum BLUE 11 No RED gt RED Panel 2 0 65535 0 0 100 0 Panel 2 0 0 Fade 12 Maximum RED 13 No GREEN gt GREEN Panel 2 0 65535 0 0 100 0 Panel 2 0 0 Fade 14 Maximum GREEN 15 No BLUE gt BLUE Panel 2 0 65535 0 0 100 0 Panel 2 0 0 Fade 16 Maximum BLUE 17 No RED gt RED Panel 3 0 65535 0 0 100 0 Panel 3 0 0 Fade 18 Maximum RED 31 Default DMX Channel DMX value Description DMX Fader type percentage value 19 No GREEN gt GREEN Panel 3 0 65535 0 0 100 0 Panel 3 0 0 Fade 20 Maximum GREEN 21 No BLUE gt BLUE Panel 3 0 65535 0 0 100 0 Panel 3 0 0 Fade 22 Maximum BLUE 32 6 Channel Mode raw or white calibrated 1 segment Default DMX Channel DMX value Description DMX Fader type percentage value 0 7 0 0 2 7 Closed 10 3 9 Snap 8 15 3 1 5 9 Open 0 0 Fade 16 151 6 3 59 2 Strobe Fast gt Slow 0 0 Fade 1 Shutter 152 175 59 6 68 6 Pulse Open Slow gt Fast 0 0 Fade 176 199 69 0 78 0 Pulse Close Slow gt Fast 0 0 Fade 200 244 78 4 95 7 Strobe Random Slow gt Fast 0 0 Fade 245 255 96 1 100 0 Open 0 0 Fade No light
3. The DMX address can be seen on the OLED display To change the address setting press the up and down arrows When the desired address is displayed NEXT FIX press Enter to save the setting For your convenience the suggested DMX SETDMXADR 10 13 address of the next device is displayed to the right Note that channel spacing is determined by the DMX mode See the DMX protocols on page 24 for specific DMX control values 17 Setting the DMX mode Using the DMX mode menu available from the control panel specify the DMX mode that provides the device controls that you require Q 2 DMX modes Function 3 Individual control of color channels for red green amp blue White is automatically mixed in 6 RGBW dimmer shutter strobe pulse amp open shutter effects 9 RGB with individual colour panel control 12 RGB with individual colour panel control dimmer shutter strobe pulse amp open shutter effects 15 RGBW dimmer shutter strobe pulse amp open shutter effects 22 RGB with fine individual colour panel control dimmer shutter strobe pulse amp open shutter effects 18 Q 2 W DMX modes Function 1 Full white color control 3 Segmented white color panel control 6 Segmented white color panel control coarse or fine 12 Individual white color panel control 14 Individual white color panel control dimmer shutter 24 Individual white color panel control
4. Fade 10 Maximum light 11 No light gt Panel 6 0 65535 0 0 100 0 i i Pane 0 0 Fade 12 Maximum light 13 No light gt Panel 7 0 65535 0 0 100 0 I Pane 0 0 Fade 14 Maximum light 42 Default DMX Channel DMX value Description DMX Fader type percentage value 15 No light gt Panel 8 0 65535 0 0 100 0 Panel 8 0 0 Fade 16 Maximum light 17 No light gt Panel 9 0 65535 0 0 100 0 i s Panel 9 0 0 Fade 18 Maximum light 19 No light gt Panel 10 0 65535 0 0 100 0 i Panel 10 0 0 Fade 20 Maximum light 21 No light gt Panel 11 0 65535 0 0 100 0 i Panel 11 0 0 Fade 22 Maximum light 23 No light gt Panel 12 0 65535 0 0 100 0 Panel 12 0 0 Fade 24 Maximum light 43 1 Channel Mode 8 bit 1 segment DMX Channel DMX value Description percentage i No light gt 1 Intensity 0 255 0 0 100 0 i i Maximum light All Panels Default DMX value 0 0 Fader type Fade 3 Channel Mode 8 bit 3 segments Default DMX Channel DMX value Description DMX Fader type percentage value i No light gt Left 1 Intensity 0 255 0 0 100 0 i 0 0 Fade Maximum light 4 Panels No light gt Center 2 Intensity 0 255 0 0 100 0 i 0 0 Fade Maximum light 4 Panels No light gt Right 3 Intensity 0 255 0 0 100 0 i i 0 0 Fade Maximum light 4 Panels
5. coarse or fine 19 Full Color Calibration and Color Temperature Correction Q 2 only All channel modes except 1 x RGB 3 Channel Mode and 3 x RGB 9 Channel Mode Lets you choose between raw or white calibrated color 2000K 10 000K via the CTC channel When you adjust the white color temperature all RGB or RGBW channels if available must be set to 100 1 x RGB 3 Channel Mode and 3 x RGB 9 Channel Mode Features full color calibration when you mix 2 or 3 colors to ensure uniform color between products Adjusting 1 color does not activate full color calibration All channel modes except 1 x RGB 3 Channel Mode and 3 x RGB 9 Channel Mode 1 x RGB 3 Channel Mode 3 x RGB 9 Channel Mode Choose raw or white calibrated color 2000K 10 000K via the CTC channel NOTE When you adjust the white color temperature all RGB or RGBW channels if available channels must be set to 100 Full Color Calibration Full Color Calibration See DMX protocols on page 24 for more details 20 Device personality settings Setting the dimming curve The setting of the dimming curve will determine the device s behavior when changing the light intensity between 0 100 Linear control provides uniform adjustment throughout the control action whereas gamma corrected dimming provides finer control at low light levels where the eye is more sensitive to change By default the Q 2 Q 2 W uses ga
6. gt 2 Intensity 0 255 0 0 100 0 0 0 Fade Maximum light Only active 3 CTC 0 255 0 0 100 0 2000K 10000K when 0 0 Fade channel gt 4 33 Default DMX Channel DMX value Description DMX Fader type percentage value No RED gt 4 RED All Panels 0 255 0 0 100 0 All Panels 0 0 Fade Maximum RED No GREEN gt 5 GREEN All Panels 0 255 0 0 100 0 All Panels 0 0 Fade Maximum GREEN No BLUE gt 6 BLUE All Panels 0 255 0 0 100 0 All Panels 0 0 Fade Maximum BLUE 34 9 Channel Mode 3 x RGB Full Color Calibration 3 segments Channel DMX value DMX percentage Description Default DMX value Fader type No RED gt 1 RED Panel 1 0 255 0 0 100 0 Panel 1 0 0 Fade Maximum RED No GREEN gt 2 GREEN Panel 1 0 255 0 0 100 0 Panel 1 0 0 Fade Maximum GREEN No BLUE gt 3 BLUE Panel 1 0 255 0 0 100 0 Panel 1 0 0 Fade Maximum BLUE No RED gt 4 RED Panel 2 0 255 0 0 100 0 Panel 2 0 0 Fade Maximum RED No GREEN gt 5 GREEN Panel 2 0 255 0 0 100 0 Panel 2 0 0 Fade Maximum GREEN No BLUE gt 6 BLUE Panel 2 0 255 0 0 100 0 Panel 2 0 0 Fade Maximum BLUE No RED gt Y RED Panel 3 0 255 0 0 100 0 Panel 3 0 0 Fade Maximum RED 35 Default DMX Channel DMX value Description DMX Fader type percentage value No GREEN gt 8 GRE
7. No RED gt 12 RED Panel 3 0 255 0 0 100 0 Panel 3 0 0 Fade Maximum RED No GREEN gt 13 GREEN Panel 3 0 255 0 0 100 0 Panel 3 0 0 Fade Maximum GREEN No BLUE gt 14 BLUE Panel 3 0 255 0 0 100 0 Panel 3 0 0 Fade Maximum BLUE No WHITE gt 15 WHITE Panel 3 0 255 0 0 100 0 Panel 3 0 0 Fade Maximum WHITE 26 12 Channel mode RGB raw or white calibrated 3 segments Default DMX Channel DMX value Description DMX Fader type percentage value 0 7 0 0 2 7 Closed 10 3 9 Snap 8 15 3 1 5 9 Open 0 0 Fade 16 151 6 3 59 2 Strobe Fast gt Slow 0 0 Fade 1 Shutter 152 175 59 6 68 6 Pulse Open Slow gt Fast 0 0 Fade 176 199 69 0 78 0 Pulse Close Slow gt Fast 0 0 Fade 200 244 78 4 95 7 Strobe Random Slow gt Fast 0 0 Fade 245 255 96 1 100 0 Open 0 0 Fade No light gt 2 Intensity 0 255 0 0 100 0 i 0 0 Fade Maximum light Only active 3 CTC 0 255 0 0 100 0 2000K 10000K when 0 0 Fade channel gt 4 27 Default DMX Channel DMX value Description DMX Fader type percentage value No RED gt 4 RED Panel 1 0 255 0 0 100 0 Panel 1 0 0 Fade Maximum RED No GREEN gt 5 GREEN Panel 1 0 255 0 0 100 0 Panel 1 0 0 Fade Maximum GREEN No BLUE gt 6 BLUE Panel 1 0 255 0 0 100 0 Panel 1 0 0 Fade Maximum BLUE No RED gt 7 RED Pane
8. address C External data indicator if DMX control is active D External data protocol DMX The device is set by default to be controlled in DMX mode o_o ll Esc Enter v l a LS A ee id E 15 Connecting to a DMX control device The device is controllable using a DMX control device and it can be connected using a DMX cable If using a cabled DMX sys tem connect the DMX in cable with male 5 pin XLR plug and out cable with female 5 pin XLR plug to the DMX data link Terminate the DMX out cable of the last device in the data link For outdoor installations use only IP rated XLR connectors suitable for outdoor use 16 Configuring the device for DMX control About DMX The Q 2 Q 2 W can be controlled using signals sent by a DMX controller on a number of channels which varies depending on the DMX mode that has been set The first channel used to receive data from a DMX control device is known as the DMX start address Each Q 2 Q 2 W must have a DMX start address set For example if a Q 2 Q 2 W has a DMX address of 10 and it is in 3 channel DMX mode then it uses channels 10 11 and 12 The following device in the DMX chain could then be set to a DMX address of 13 If two or more DMX devices of the same type have the same DMX address then they will mimic each other s behavior Incorrect set tings will result in unpredictable responses to the lighting controller Setting the DMX address
9. base Fasten securely through the resulting holes with four 6 mm 1 4 in corrosion resistant mechanical fasteners suitable for the location 4 x 6 0 2 in WANT lin 12 One Omega bracket is supplied with the device if it is to be flown above the ground Remove the floor stand base and rig the Q 2 Q 2 W to a support truss or structure using the supplied brackets and suitable clamps Fasten a safety cable not shown between the support structure and the attachment point on the device The safety cable must be approved for a safe working load SWL of 10 times the weight of the device A The device can be tilted from 0 180 To adjust the tilt angle loosen the two tilt brake locks one on each side of the device and tilt the device to the angle required and re tighten the locks If installed horizontally with a downward beam angle water can potentially pool in the fan wells Under normal operation the moisture will evaporate CAUTION f the device has been operating always allow it cool for 15 minutes before handling ez WARNING Always secure an elevated device with a safety cable as backup AA TE 13 Connecting AC power The Q 2 Q 2 W can operate on any 100 277V 50 60 Hz AC mains power supply It draws approximately 1 2 amps at full power 230V For permanent installation have a qualified electrician wire the mains cable directly to a suitable branch circui
10. cr Safety wire eyelet si i on Esce so TC E oe 10 Preparing for installation Unpack the device and inspect it to ensure that it has not been damaged during transport The Q 2 series is shipped with an Omega bracket that can be used to mount the device at elevation The device is IP65 rated and is designed for use in wet locations This means that it is protected from Dust to the degree that dust cannot enter the device in sufficient quantities as to interfere with its operation Lower pressure jets of water from any direction When selecting a location for the device ensure that It is situated away from public thoroughfares and protected from contact with people It is not immersed in water or exposed to high pressure water jets lt has adequate ventilation 11 Installing the Q 2 Q 2 W The Q 2 Q 2 W may be installed in any orientation but if in i 272 SL 0 7 in stalled horizontally with a downward beam angle water can 2301 9 1 in tin potentially pool in the fan wells Under normal operation the moisture will evaporate However in locations with high rain fall you may wish to fabricate a rain shield above the device I 72 or modify the position and orientation of the device to mini 5 i in 2 i in 135 6 3 in mize pooling For permanent installation on the ground remove the rubber feet from the floor stand
11. repair Upgrading the firmware The firmware installed on the device can be identified using the Info Firmware version menu We recommend that you keep your device s firmware up to date Visit http www sgmlight com to download the latest firmware To perform firmware updates you need a Windows based personal computer and a SGM USB 5 Pin XLR upload cable available from your SGM distributor Cleaning To maintain optimal performance regular cleaning is essential Cleaning schedules will vary depending on the operating environment and the installation should therefore be checked at frequent intervals within the first few weeks of op eration to see whether cleaning is necessary This procedure will allow you to assess cleaning requirements in your particular situation If in doubt consult your SGM dealer for a suitable maintenance schedule Clean the Q 2 Q 2 W using a soft cloth dampened with a solution of water and a mild detergent Do not use products that contain solvents abrasives or caustic agents for cleaning as they can cause damage to both hardware cables and connec tors 23 DMX protocols Configuring DMX is described in Setting the DMX mode on page 18 This section contains Q 2 DMX protocols below and Q 2 W DMX protocols on page 37 Q 2 DMX protocols 15 Channel Mode RAW Full RGBW control 3 segments Default DMX Channel DMX value Description DMX Fader type percentag
12. AX POWER High fan speed for maximum cooling effect FACTORY DEFAULT Reset the device to factory default SERVICE PIN SERVICE MENU PRODUCT TYPE CALIBRATION INFO PSU VOLTAGE PWN OUT 47 Level 1 Level 2 Level 3 Function TEST SELFTEST Initiates self test sequence DISPLAY TEST Service use only COLOR TEST 48 Devices and accessories Included items Floor stand including screws Omega bracket User manual Neoprene pouch Ordering information O 2 Color Flog Lights as aia eee Saat Q2Whitei AO SGM USB uploader cable MIZAR LA eee RA ens AE ie Order no 80030535 Order no 80030536 Order no 83062011 49 APPROVALS AND CERTIFICATIONS CONTO MS 10 canon pd dad 2004 108 EC EMC Directive CONTORMS ito ii 2006 95 EC Low Voltage Directive Gonforms A0 ue hear i nn 2011 65 EU RoHS2 Directive CE RoHS The information in this document is subject to change without notice 50 User s notes 51 SGM SGM A S Sommervej 23 8210 Aarhus V Denmark Tel 45 70 20 74 OO info sgmlight com www sgmlight com
13. EN Panel 3 0 255 0 0 100 0 Panel 3 0 0 Fade Maximum GREEN No BLUE gt 9 BLUE Panel 3 0 255 0 0 100 0 Panel 3 0 0 Fade Maximum BLUE 3 Channel Mode 1 x RGB Full Color Calibration 1 segment Default DMX Channel DMX value Description DMX Fader type percentage value No RED gt 1 RED All Panels 0 255 0 0 100 0 Panel 1 0 0 Fade Maximum RED No GREEN gt 2 GREEN All Panels 0 255 0 0 100 0 Panel 1 0 0 Fade Maximum GREEN No BLUE gt 3 BLUE All Panels 0 255 0 0 100 0 Panel 1 0 0 Fade Maximum BLUE 36 Q 2 W DMX protocols Configuring DMX is described in Setting the DMX mode on page 18 14 Channel Mode 8 bit 12 segments Default DMX Channel DMX value Description DMX Fader type percentage value 0 7 0 0 2 7 Closed 10 3 9 Snap 8 15 3 1 5 9 Open 0 0 Fade 16 151 6 3 59 2 Strobe Fast gt Slow 0 0 Fade 1 Shutter 152 175 59 6 68 6 Pulse Open Slow gt Fast 0 0 Fade 176 199 69 0 78 0 Pulse Close Slow gt Fast 0 0 Fade 200 244 78 4 95 7 Strobe Random Slow gt Fast 0 0 Fade 245 255 96 1 100 0 Open 0 0 Fade No light gt 2 Intensity 0 255 0 0 100 0 i 0 0 Fade Maximum light No light gt 3 Panel 1 0 255 0 0 100 0 Panel 1 Maximum light 37 Default DMX Channel DMX value Descr
14. Fade Maximum light No light gt 4 Panel 4 0 255 0 0 100 0 i Panel 0 0 Fade Maximum light No light gt 5 Panel 5 0 255 0 0 100 0 i Panel 0 0 Fade Maximum light No light gt 6 Panel 6 0 255 0 0 100 0 i i Panel 0 0 Fade Maximum light No light gt 7 Panel 7 0 255 0 0 100 0 i Panel 0 0 Fade Maximum light 40 Default DMX Channel DMX value Description DMX Fader type percentage value No light gt 8 Panel 8 0 255 0 0 100 0 Panel 8 0 0 Fade Maximum light No light gt 9 Panel 9 0 255 0 0 100 0 i Panel 9 0 0 Fade Maximum light No light gt 10 Panel 10 0 255 0 0 100 0 i Panel 10 0 0 Fade Maximum light No light gt 11 Panel 11 0 255 0 0 100 0 i Panel 11 0 0 Fade Maximum light No light gt 12 Panel 12 0 255 0 0 100 0 i Panel 12 0 0 Fade Maximum light 41 24 Channel Mode 16 bit 12 segments Default DMX Channel DMX value Description DMX Fader type percentage value 1 No light gt Panel 1 0 65535 0 0 100 0 i Pane 0 0 Fade 2 Maximum light No light gt Panel 2 0 65535 0 0 100 0 i Pane 0 0 Fade Maximum light No light gt Panel 3 0 65535 0 0 100 0 i Pane 0 0 Fade Maximum light No light gt Panel 4 0 65535 0 0 100 0 Pane 0 0 Fade Maximum light No light gt Panel 5 0 65535 0 0 100 0 i Pane 0 0
15. a 2 Q 2 WHITE Q 2 Q 2 W Dimensions 271 10 7 in 8 8in 271 10 7 in 334 13 1 in 4 90 3 5 in 105 230 9 1 in 4 1 in 135 161 5 3 in pos D 6 3 in Measurements in millimetres lo o and inches in brackets Drawing not to scale 272 10 7 in Q 2 Q 2 W USER MANUAL 2015 SGM Information subject to change without notice SGM and all affiliated companies disclaim liability for any injury damage direct or indirect loss consequential or economic loss or any other loss occasioned by the use of inability to use or reliance on the information contained in this manual The SGM logo the SGM name and all other trademarks in this document pertaining to services or products by SGM or its affiliates and subsidiaries are trademarks owned or licensed by SGM or its affiliates or subsidiaries The original edition of this document is in English All other language editions are translations of the original edition This edition applies to firmware version 1 10 or later Contents 2 2 DIMENSIONS eli A eed s 2 A Atena la a AEA A AAN EA age iaia 6 INTOGUCUOA er did a A A NEESER 9 Parts identification and terminology ui 10 Preparing for installation uri 11 Installing the Q224Q2 Weisser 12 Connecting AC powers r
16. a een iii redada did 14 Configuring NS dec iz ritornare ani a 15 Connecting to a DMX control device uc li 16 Configuring the device for DMX control e 17 OI ERRO CEI I 17 Setting the DMX ad dress eiii na A I EE A AAA ARRE 17 Seting the DMX Mode 2 A A A Ne on Alle ii Less 18 Full Color Calibration and Color Temperature Correction Q 2 only i 20 Device personality settings Setting he CIMMING CUIVG A asa iaia iaia iii Flipping the OLED OISDIAY 2 55 ox scart i I EA Det I o Setting the OLED display saver reg selting the fan MO A A are ari ee eee ai ai abi SS eil iaia olii anna Upgrading thedimwale s 3 tir a I IN O Li iaia Gleaning gt loi A A a ii aaa DMX proto Snte Nee ere er oa Q 2 DMX protocols sa Q 2 W DMX protocols A aliena hai Devices and accessories e a Er SEER a a een seg 49 Ordering information taa da a ada nen ohne de cre toc dad 49 USERS MOES A A ana 51 Safety information aN The Q 2 Q 2 W is a multi environmental device with an IP rating of 65 intended for professional use only It is not suitable for household use Impropre a l usage domestique WARNING Read the safety precautions in this section before unpacking installing powering or operating this device Review the following safety precautions carefully before installing or operating the device This device must be installed in accordance with the applicable i
17. e value 0 7 0 0 2 7 Closed 10 3 9 Snap 8 15 3 1 5 9 Open 0 0 Fade 16 151 6 3 59 2 Strobe Fast gt Slow 0 0 Fade 1 Shutter 152 175 59 6 68 6 Pulse Open Slow gt Fast 0 0 Fade 176 199 69 0 78 0 Pulse Close Slow gt Fast 0 0 Fade 200 244 78 4 95 7 Strobe Random Slow gt Fast 0 0 Fade 245 255 96 1 100 0 Open 0 0 Fade No light gt 2 Intensity 0 255 0 0 100 0 0 0 Fade Maximum light 24 Default DMX Channel DMX value Description DMX Fader type percentage value Only active 3 CTC 0 255 0 0 100 0 2000K 10000K when 0 0 Fade channel gt 4 No RED gt 4 RED Panel 1 0 255 0 0 100 0 Panel 1 0 0 Fade Maximum RED No GREEN gt 5 GREEN Panel 1 0 255 0 0 100 0 Panel 1 0 0 Fade Maximum GREEN No BLUE gt 6 BLUE Panel 1 0 255 0 0 100 0 Panel 1 0 0 Fade Maximum BLUE No WHITE gt 7 WHITE Panel 1 0 255 0 0 100 0 Panel 1 0 0 Fade Maximum WHITE No RED gt 8 RED Panel 2 0 255 0 0 100 0 i Panel 2 0 0 Fade Maximum RED No GREEN gt 9 GREEN Panel 2 0 255 0 0 100 0 Panel 2 0 0 Fade Maximum GREEN 25 Default DMX Channel DMX value Description DMX Fader type percentage value No BLUE gt 10 BLUE Panel 2 0 255 0 0 100 0 Panel 2 0 0 Fade Maximum BLUE No WHITE gt 11 WHITE Panel 2 0 255 0 0 100 0 Panel 2 0 0 Fade Maximum WHITE
18. evice is securely fastened to a load bearing surface with suitable corrosion resistant hardware For temporary installation with clamps ensure that the quarter turn fasteners are turned fully and secured with a suitable safety cable The cable must be approved for a safe working load SWL of 10 times the weight of the device and it must have a minimum gauge of 2 mm Introduction The Q 2 is a low profile compact IP65 rated full color LED flood light incorporating 432 RGB 432 White LEDs divided into 3 individually controllable segments for wide ranging color and effect combinations The Q 2 W is a low profile compact IP65 rated cool white flood light incorporating 432 cool white LEDs divided into 12 indi vidually controllable segments for wide ranging effect combinations Both devices offer dimming a half peak spread angle of 110 and a lamp life expectancy of 50 000 hours In addition the Q 2 offers RGBW color mixing and color temperature control This manual covers installation use and maintenance of the Q 2 Q 2 W All documentation is also available from the SGM web site http www sgmlight com At 70 of luminous output under the manufacturer s test conditions Parts identification and terminology Q 2 432 RGB 432 White LEDs Q 2 W 432 White LEDs Base Tilt brake lock Cooling fan DMX in out Power connection OLED display Control panel ro nmo nouw gt
19. iption DMX Fader type percentage value No light gt 4 Panel 2 255 0 0 100 0 o Panel 2 0 0 Fade Maximum ligh No light gt 5 Panel 3 255 0 0 100 0 Panel 3 0 0 Fade Maximum ligh No light gt 6 Panel 4 255 0 0 100 0 i Panel 4 0 0 Fade Maximum ligh No light gt 7 Panel 5 255 0 0 100 0 Panel 5 0 0 Fade Maximum ligh No light gt 8 Panel 6 255 0 0 100 0 i Panel 6 0 0 Fade Maximum ligh No light gt 9 Panel 7 255 0 0 100 0 Panel 7 0 0 Fade Maximum ligh No light gt 10 Panel 8 255 0 0 100 0 Panel 8 0 0 Fade Maximum ligh 38 Default DMX Channel DMX value Description DMX Fader type percentage value No light gt 11 Panel 9 0 255 0 0 100 0 Panel 9 0 0 Fade Maximum ligh No light gt 12 Panel 10 0 255 0 0 100 0 i Panel 10 0 0 Fade Maximum ligh No light gt 13 Panel 11 0 255 0 0 100 0 Panel 11 0 0 Fade Maximum ligh No light gt 14 Panel 12 0 255 0 0 100 0 i Panel 12 0 0 Fade Maximum ligh 39 12 Channel Mode 8 bit 12 segments Default DMX Channel DMX value Description DMX Fader type percentage value No light gt 1 Panel 1 0 255 0 0 100 0 Panel Maximum light No light gt 2 Panel 2 0 255 0 0 100 0 i Panel 0 0 Fade Maximum light No light gt 3 Panel 3 0 255 0 0 100 0 Panel 0 0
20. l 2 0 255 0 0 100 0 Panel 2 0 0 Fade Maximum RED No GREEN gt 8 GREEN Panel 2 0 255 0 0 100 0 Panel 2 0 0 Fade Maximum GREEN No BLUE gt 9 BLUE Panel 2 0 255 0 0 100 0 Panel 2 0 0 Fade Maximum BLUE No RED gt 10 RED Panel 3 0 255 0 0 100 0 A Panel 3 0 0 Fade Maximum RED 28 Default DMX Channel DMX value Description DMX Fader type percentage value No GREEN gt 11 GREEN Panel 3 0 255 0 0 100 0 Panel 3 0 0 Fade Maximum GREEN No BLUE gt 12 BLUE Panel 3 0 255 0 0 100 0 Panel 3 0 0 Fade Maximum BLUE 29 22 Channel Mode 16 bit raw or white calibrated 3 segments Default DMX Channel DMX value Description DMX Fader type percentage value 0 7 0 0 2 7 Closed 10 3 9 Snap 8 15 3 1 5 9 Open 0 0 Fade 16 151 6 3 59 2 Strobe Fast gt Slow 0 0 Fade 1 Shutter 152 175 59 6 68 6 Pulse Open Slow gt Fast 0 0 Fade 176 199 69 0 78 0 Pulse Close Slow gt Fast 0 0 Fade 200 244 78 4 95 7 Strobe Random Slow gt Fast 0 0 Fade 245 255 96 1 100 0 Open 0 0 Fade No light gt Intensity 0 65535 0 0 100 0 0 0 Fade Maximum light Only active 4 CTC 0 255 0 0 100 0 2000K 10000K when 0 0 Fade channel gt 4 30 Default DMX Channel DMX value Description DMX Fader type percentage value No RED gt
21. mma corrected dimming For uniform response set all devices to the same dimming curve To set the desired dimming curve use the Settings Dimming curve menu Flipping the OLED display If the device is installed hanging upside down it might be useful to flip the display so that it is easier to read To flip the display use the Settings Flip display menu or press the up and down buttons on the control panel at the same time Setting the OLED display saver By default the OLED display dims down after a short period when the control panel is not in use but it can also be set to turn off completely Pressing any key will always turn on the display or restore it to normal brightness To change the display saver use the Settings Display saver menu NOTE To avoid the risk of display deterioration caused by long term use in permanent installations it is recommended to use the Display saver Display off setting 21 Setting the fan mode For operating environments where low noise is a requirement or where the device will be operating in high temperatures it is possible to adjust the default fan speed to low or high using the Settings Fan mode menu 22 Service There are no user serviceable components in the device Do not open the Q 2 Q 2 W as doing so is likely to damage the ingress protection Consult your SGM dealer if the device operates abnormally is defective or otherwise in need of service or
22. nstallation code by a person familiar with the construction and operation of the device and the hazards involved Preventing electric shock WARNING Risk of electric shock Always power off unplug the device before removing any covers Ensure that the power is turned off when connecting the device to the AC mains supply Ensure that the device is electrically connected to earth ground Do not apply power if the device is in any way damaged Do not immerse the device in water or liquid Preventing burns and fire AAN WARNING Take measures to prevent burns and fire Install in a location that prevents accidental contact with the device Install only in a well ventilated space Install at least 0 3 m 12 in away from objects to be illuminated Install only in accordance with applicable building codes Ensure a minimum clearance of 0 1 m 4 in around the cooling fans Do not paint cover or modify the device Keep all flammable materials away from the device Allow the device to cool for 15 minutes after operation before touching it CAUTION Exterior surface temperature after 5 min operation 45 C 113 F Steady state 60 C 140 F Avoid personal injury WARNING Take measures to prevent personal injury Do not look directly at the light source from close range Take precautions to prevent injury due to falls when working at height For permanent installation ensure that the d
23. t The junction s ingress protection IP rating must be suitable for the location For temporary installation the mains cable may be fitted with a grounded connector intended for exterior use The power cable color coding is given in Table 1 1 i Wire Color Symbol Conductor Connect the black wire to live pu Black L live Connect the white wire to neutral _ White N neutral green yellow or round earth Connect the green yellow wire to ground earth 9 4 li 2 Table 1 1 The device must be grounded earthed and be able to be isolated from AC power The AC power supply must incorporate a fuse or circuit breaker for fault protection After connecting the Q 2 Q 2 W to power run the on board test using the Test Selftest menu to ensure that the device and each LED are functioning correctly See Control menu on page 46 CAUTION Do not open the device to replace the supplied power cable or connect the device to an electrical dimmer system as this can damage it 14 Configuring the device Set up the device using the control panel and OLED display at the top of the device Navigate the menus and options using the arrow buttons and select items using the Enter button The options available are listed in Control menu on page 46 After powering the Q 2 Q 2 W on the display shows the currently selected operating mode and other information A Operational mode B DMX

q-2 / q-2 w user manual

Contents

Download Pdf Manuals

Related Search

Related Contents