Logic or Relay Module - AV-iQ
Contents
1. QUICK START GUIDE INTRODUCTION Win ED BASIC SETUP PROCEDURE 1 Connect unit to power and network IED1522LR LOGIC RELAY MODULE IED1522LR Logic Relay Module Quick Start Guide The 1522LR Logic Relay Module is a cost effective interface module that operates as an integral part of an IED GLOBALCOM system It is a web enabled programmable relay device for a wide variety of remote control and automation applications It has two electro me chanical relays two optically isolated inputs and a wealth of cutting edge features The relays can be controlled remotely using actions configured in the GLOBALCOM control software The optically isolated inputs can be used trigger actions or as logic monitor points that will register faults in the system The module receives its power over IEEE 802 3af PoE Power over Ethernet and communicates with other system devices over the Ethernet network 2 Setup a computer on the same network as the input module To do this set the IP address of the computer to 10 2 150 x where x can be any unused address between 1 and 174 with a netmask of 255 0 0 0 3 Configure the 1522LR using web browser Do this by pointing browser to http 10 2 150 175 setup html The login user name is admin and the password is iednet all lower case 4 Setthe permanent IP address in the configuration page Restart the 1522LR remove power re apply power After re Starting the 1522LR set the computer b2. ack to its original settings and access the 1522LR at its new IP address 5 Connect relay contacts Factory Default Settings Control Web Address Setup Password iednet all lower case Full user manual may be downloaded from For technical support email questions to Support iedaudio com www iedaudio com Innovative Electronic Designs LLC 1522LR Pinout Power Supply Input Power Supply Input 5V DC output 50mA max Ground common for 5V out Optically Ilsolated Input 1 Optically Isolated Input 1 Optically Isolated Input 2 Optically Isolated Input 2 Relay 1 common Relay 1 Normally Closed Relay 1 Normally Open Relay 2 Common Relay 2 Normally Closed Relay 2 Normally Open Power supply input terminals not used when device is connected to PoE source 9701 Taylorsville Road Louisville KY 40299 USA REV 11 12 1 502 267 7436 phone WMilelk 1 502 267 9070 fax amicus www iedaudio com DOC 1214C Group 2012 Innovative Electronic Designs LLC
Download Pdf Manuals
Related Search