PDW-U1 - GRS Systems
Contents
1. DISCMETA XML DJ EDTR INDEX XML in I INDEX BUP a Root directory 4 1 2 File Operation Restrictions This section explains which operations are possible on files stored in each directory Root directory File name Content Operations Read Overwrite Rename Create Delete INDEX XML Contains data for management of the audio video material on the disc Yes No No No No ALIAS XML Contains conversion tables for assigning user defined names to clips and clip lists Yes No No No No DISCMETA X ML Contains metadata to indicate the disc properties Yes yes No No No 4 1 Overview File name Content Operations Read Overwrite Rename Create Delete MEDIAPRO Contains a list of Yes No No No No XML audio video material on the disc basic properties related information and information about access methods SYSPRO Contains Yes No No No No XML information about device system settings and menu settings Other files Files other than the No No above a Only when Naming Form is set to free in the File Name Setting section ofthe Option setting Notes Q screen of the utility software e Directories cannot be created in the root 9 b Only files which can be writ2. 1 1 Features The PDW U1 is a compact and lightweight disc drive which when connected to a nonlinear editor enables reading and writing of video and audio data In combination with a laptop computer it can be used in the field and together with a nonlinear editor it provides an ideal inexpensive video production system The features of the PDW U1 include the following Support for all XDCAM formats Reading and writing are supported in all formats adopted by the XDCAM D series that is MPEG HD422 MPEG HD MPEG IMX and DVCAM in addition to all bit rates 1 XDCAM is a trademark of Sony Corporation Support for dual layer discs In addition to conventional single layer discs 23 3 GB dual layer discs 50 GB are also supported IT friendly system through USB interface The interface is the very widely used high speed USB USB 2 0 enabling easy connection to a computer The PDW U1 Chapter can be used in the same way that an external drive is used to load data files from the drive into the computer and to write data files from the computer to the drive High data transfer rates The newly developed optical drive allows high speed access maximum read speed 120 Mbps maximum write speed 84 Mbps from a nonlinear editing system Preview and simple editing using supplied software Using the supplied PDZ VX10 XDCAM Viewer for Windows you can preview material simply Further using the supplied PDZ
3. 1 3 Supplied Software L 1eydeu9 MEIASAO 11 1 3 2 System Requirements Using any of the supplied software requires Processor XDCAM Drive Software Utility Software Q 4 acomputer meeting the following conditions Windows O 5 lt ltem Software Requirement Intel Core 2 Duo1 83 GHz or higher PDZ VX10 XDCAM Viewer Intel Pentium 4 3 GHz or higher or Intel Core Duo1 83 GHz or higher PDZ 1 Proxy Browsing Software Pentium M 1 GHz or higher Memory XDCAM Drive Software Utility Software PDZ VX10 XDCAM Viewer 1 GB or more PDZ 1 Proxy Browsing Software 512 MB or more Free hard XDCAM Drive Software 100 MB or more disk space Utility Software 20 MB or more PDZ VX10 XDCAM Viewer 100 MB or more PDZ 1 Proxy Browsing Software e At time of installation 100 MB or more e For proxy AV data approx 1 4 GB per 90 min For the Work folder for storing material Monitor XDCAM Drive Software Utility Software PDZ VX10 XDCAM Viewer Resolution 1024 x 768 pixels or better PDZ 1 Proxy Browsing Software e Resolution 1024 x 768 pixels or better e Color XGA 16 bit or better Operating XDCAM Drive Software system Utility Software PDZ VX10 XDCAM Viewer Microsoft Windows XP Professional Service Pack 2 or later or Microsoft Windows Vista Business Ultimate 32 bit or later PDZ 1 Proxy Br
4. N D Connect this unit to a computer page 19 Turn this unit and the computer on In the utility software setup menu set items as required For details of the setup menu refer to the help file of the utility software Insert a disc into this unit page 21 4 3 File Access Operations Accessing files with nonlinear editing software For details of the file access operations refer to the manual provided with the editing software to be used Accessing files with Explorer Finder Start Windows Explorer or Macintosh Finder and check that a drive letter has been assigned to this unit The drive letter will differ depending on the number of other peripherals connected to the remote computer You can perform file operations on the disc loaded in this unit in the same way that you operate on local drives and files on network computers All file operations are not possible for some types of files For details see 4 1 2 File Operation Restrictions page 24 To eject discs from a remote computer For Windows right click the icon representing this unit in Explorer and select Eject from the menu which appears On a Macintosh click the Eject button to the right of the Finder icon for this unit or drag to the eject icon in the Dock 4 2 Preparations for File Access 4 3 File Access Operations Using PDZ 1 Proxy Browsing Software Windows only When a computer with the PDZ 1 Proxy Browsi
5. 1 Proxy Browsing Software for Windows you can carry out simple editing and adding of metadata Additionally the supplied PDZK P1 XDCAM Transfer for Macintosh allows the XDCAM material to be used with the Apple Final Cut Pro D video editing software 1 Final Cut Pro is a trademark of Apple Inc registered in the United States and other countries Itis not possible to write back the results of editing to the disc inserted in the PDW U1 using the Apple Final Cut Pro or PDZK P1 XDCAM Transfer 1 1 Features Je deyg MOIAJOAQ 9 MBIAIBAQ Jedeyg 10 Lightweight and compact field specification The unit is designed to be lightweight and compact for use in the field The mechanical construction is highly resistant to shocks and dust Menu operation from a computer using the utility software By installing the supplied utility software in a computer connected to this unit you can make settings or upgrade the unit by means of menu operations on the computer 1 2 Example of Use 1 2 Example of Use The following figure shows an example system for reading or writing material recorded with a XDCAM camcorder on a computer connected to this unit camcorder PEN N Professional Disc DC IN PDW U1 DC power supply Reading Writing Laptop computer 1 3 Supplied Software 1 3 1 List ofthe Software The following software are su
6. Sony Deutschland GmbH Hedelfinger Strasse 61 70327 Stuttgart Germany For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents AVERTISSEMENT Afin de r duire les risques d incendie ou d lectrocution ne pas exposer cet appareil la pluie ou l humidit Afin d carter tout risque d lectrocution garder le coffret ferm Ne confier l entretien de l appareil qu un personnel qualifi AVERTISSEMENT Lors de l installation de l appareil incorporer un dispositif de coupure dans le c blage fixe ou brancher la fiche d alimentation dans une prise murale facilement accessible proche de l appareil En cas de probl me lors du fonctionnement de l appareil enclencher le dispositif de coupure d alimentation ou d brancher la fiche d alimentation AVERTISSEMENT 1 Utilisez un cordon d alimentation c ble secteur 2 fils fiche femelle fiche m le conformes la r glementation de s curit locale applicable 2 Utilisez un cordon d alimentation c ble secteur 2 fils fiche femelle fiche m le avec des caract ristiques nominales tension amp rage appropri es Pour toute question sur l utilisation du cordon d alimentation fiche femelle fiche m le ci dessus consultez un technicien du service apr s vente qualifi Pour les clients en Europe Le fabricant de ce produit est Sony Corporation 1 7 1 Konan Minato ku
7. Yes No No b No No 2 file generated automatically when a C MXF file is created 0001 to 9999 Other files Files other than the No No Ze above a The unit can handle files with user defined d When a C MXF file is deleted the names in the C part C S01 XML file with the same name in the b When the C part of a C MXF file name is C part is also deleted automatically changed a C S01 MXF file with the same name in the C part is changed automatically Note c When a C MXF file is created a O C S01 XML file with the same name in the Directories canoe beicreatediin the Sub D gt C part is generated automatically directory 3 A General directory a a File name Content Operations Read Overwrite Rename Create Delete 8 Any file Yes Yes Yes 2 Yes Yes P a UTF 8 file names can be up to 63 bytes in length Depending on the character type file names including extension may be limited to 21 characters b When the Make the drives RecInhibit check box is not checked in the Utility Software The following directory operations are possible in the General directory e Directory creation up to 64 levels including the General directory e Deletion and renaming of directories 4 1 Overview 27 sell4 6ullpueH JeldqedO 28 4 2 Preparations for File Access
8. and follow the procedures indicated in the next illustration DISC IN indicator To load With the label surface on the right insert the disc The disc is drawn in To unload Press the EJECT button When a disc is loaded the DISC IN indicator lights If an unformatted disc is loaded to the unit when the unit is connected to a Macintosh computer select U1 Utility gt Eject from the menu of the Utility software to unload the disc 3 4 5 To Eject Discs With the Unit Powered Off When the power is not supplied it may not be possible to eject discs by pressing the EJECT button In these situations you can use the following as an emergency procedure to eject a disc manually 1 Power the unit off 3 4 Handling Discs suoneledei4 1ejdeu9 21 suoneledei4 1edeu9 22 2 Turn the cover of the manual eject mechanism on the front panel counterclockwise as shown in the figure Be careful not to turn the cover more than necessary 3 Check the position of the screw then using a Phillips screwdriver turn the screw counterclockwise until the disc is ejected After ejecting the disc it is not necessary to return the screw to its original position The next time the unit is powered on normal operation will resume 4 Replace the cover 3 4 6 Media Protection Function This unit is equipped with a media protection function 3 4 Han
9. cable into this slot 2 2 Rear Panel Sued Jo suolounj pue seweN z1e1deu9 15 sled Jo suolounj pue seweN 2 1e1deu9 16 For information about how to use your security cable refer to the instructions provided with the security cable Cable clamper Use this clamper to fix the cable of the AC adaptor Clip the cable with the clamper as shown in the following figure 2 2 Rear Panel Preparations 3 1 Software Installation To use this unit the necessary software must first be installed on the computer to which it is connected For details of software operating environment requirements see page 12 3 1 1 Windows Installation XDCAM Drive Software and utility software Installing the XDCAM Drive Software in the computer allows video and audio data to be handled as files see Chapter 4 Handling Files page 23 In order to check and manipulate the settings on this unit from a computer install the utility software on the computer connected to this unit Load the supplied PDW U1 CD ROM into the computer s CD ROM drive and run the program Setup exe in the XDCAM Drive Software folder on the CD ROM Follow the directions on screen to install the XDCAM Drive Software and then the utility software Chapter If an old version of the XDCAM Drive Software is already installed it must be uninstalled before you install the new version Use
10. ATION WHEN OPEN CAUTION DO NOT STARE INTO BEAM For U S A CLASS 2 LASER RADIATION WHEN OPEN CAUTION DO NOT STARE INTO THE BEAM RAYONNEMENT LASER CLASSE 2 L OUVERTURE ATTENTION NE PAS REGARDER LE FAISCEAU BEI FFNUNG LASERSTRAHLUNG DER KLASSE 2 VORSICHT NICHT IN DEN STRAHL SEHEN KLASSE 2 LASER STR LING NAR BEN ADVARSEL STR IKKE INDI LYSSTRALEN KLASSE 2 LASERSTRALING NAR PEN ADVARSEL IKKE STIRR INN STRALEN STR LNING FRAN KLASS 2 LASER DA APPARATEN AR PPEN VARNING TITTA INTE IN LASERSTRALEN TURVALLISUUSLUOKAN 2 LASERSATEILY AVATTUNA VARO ALA KATSO SATEESEEN For EUROPE en Hawk Dieser Aufkleber befindet sich auf der Innenseite der rechten Seitenabdeckung der Einheit Table of Contents Chapter 1 Chapter 2 Chapter 3 Chapter 4 Overview 1 1 Features edd E E ATT 9 1 2 Example of Use 0000 db don 10 1 3 Supplied Software ecssssssossssssonssossonssossnnsnnssnnennssnnsnnssonsannsnnee 11 1 3 1 List of the Software 11 1 3 2 System Requirements pe 12 Names and Functions of Parts 2 1 Front Panel so pe ssspo ssas o o Soss esososseass 14 2 2 Rear Panel Preparations 3 1 Software Installation ss 17 3 1 1 Windows Installation ee 17 3 1 2 Macintosh Installation pp 18 3 2 Connections and Settings seen 19 3 2 1 Connecting to a Computer ppp 19 3 3 Power Preparations essence 20 3 4 Handling Discs esse 20 3 4 1 Discs Used for Read
11. Add or Remove Programs on the Control Panel to remove the old version of the Sony XDCAM Drive Software After doing so be sure to restart the computer To install the PDZ 1 Proxy Browsing Software Load the supplied XDCAM Application Software CD ROM into the computer s CD ROM drive and run the program Setup exe in the PDZ 1 folder on the CD ROM For more details refer to the ReadMe file of the PDZ 1 To install the PDZ VX10 XDCAM Viewer Load the supplied XDCAM Application Software CD ROM into the computer s CD ROM drive and run the program Setup exe in the PDZ VX10 folder on the CD ROM For more details refer to the help file of the PDZ VX10 8 1 Software Installation suoneledei4 1e1deu9 17 suoljeledeld 84eldeuD 18 3 1 2 Macintosh Installation Utility software To install the utility software load the supplied PDW U1 CD ROM into the computer s CD ROM drive and then run the program U1Utility pkg which is located in the U1_Utility folder of the Mac folder on the CD ROM To install the PDZK P1 XDCAM Transfer Load the supplied XDCAM Application Software CD ROM into the computer s CD ROM drive and run the program XDCAM Transfer pkg in the PDZK P1 folder on the CD ROM For more details refer to the help file of the PDZK Pl 3 1 Software Installation 3 2 Connections and Settings 3 2 1 Connecting to a Computer By connecting this unit to a computer you can us
12. PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY OR FOR ANY OTHER REASON WHATSOEVER Specifications The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of Sony Corporation For Customer in China 39 http pro sony com cn Sony Corporation PDW U1 SYL 4 131 292 01 1 http www sony net 2007
13. SONY PROFESSIONAL DISC DRIVE UNIT PDW UT DVCAM OPERATION MANUAL 2nd Edition Revised 1 2 To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture To avoid electrical shock do not open the cabinet Refer servicing to qualified personnel only WARNING When installing the unit incorporate a readily accessible disconnect device in the fixed wiring or connect the power plug to an easily accessible socket outlet near the unit Ifa fault should occur during operation of the unit operate the disconnect device to switch the power supply off or disconnect the power plug WARNING THIS WARNING IS APPLICABLE FOR USA ONLY If used in USA use the UL LISTED power cord specified below DO NOT USE ANY OTHER POWER CORD Plug Cap Parallel blade NEMA 1 15P Configuration Cord Type NISPT 2 or SPT 2 two 16 or 18 AWG wires Length Minimum 1 5 m 4 ft 1lin Less than 2 0 m 7 ft Rating Minimum 7A 125V Using this unit at a voltage other than 120V may require the use of a different line cord or attachment plug or both To reduce the risk of fire or electric shock refer servicing to qualified service personnel WARNING THIS WARNING IS APPLICABLE FOR OTHER COUNTRIES 1 Use the approved Power Cord 2 core mains lead Appliance Connector Plug that conforms to the safety regulations of each country if applicable 2 Use the Power Cord 2 core mains lead Appl
14. Start button and then select All Programs gt Sony XDCAM Drive gt U1 Utility This displays the home window of the utility software e When you are using Windows XP you must log on to the computer as a user with Computer Administrator privileges to start the utility software When you log into Windows Vista as an Administrator and start this software with User Account Control enabled a dialog appears asking for permission to 5 1 Starting and Exiting the Utility Software Chapter continue Click the Continue button to continue When you are using Windows Vista privileges differ as follows depending on whether User Account Control is enabled or disabled When User Account Control is enabled The utility software demands Administrator privileges and Windows Vista opens a dialog asking you to confirm the elevation of privileges from a limited user account to an Administrator account If you approve the elevation of privileges the utility software will run with Administrator privileges In this case you can use all the functions of the utility software If you attempt to start the utility software without approving the elevation of privileges a dialog appears to inform you that the software will run under a limited user account It also informs you which restrictions will be imposed If you start the utility software in limited mode you cannot change the settings in the User Settings sc
15. Tokyo Japon Le repr sentant autoris pour EMC et la s curit des produits est Sony Deutschland GmbH Hedelfinger Strasse 61 70327 Stuttgart Allemagne Pour toute question concernant le service ou la garantie veuillez consulter les adresses indiqu es dans les documents de service ou de garantie s par s CAUTION For U S A LASER RADIATION WHEN OPEN DO NOT STARE INTO BEAM CAUTION ATTENTION VORSICHT ADVARSEL ADVARSEL VARNING VARO For EUROPE CLASS 2 LASER RADIATION WHEN OPEN DO NOT STARE INTO THE BEAM RAYONNEMENT LASER CLASSE 2 LOUVERTURE NE PAS REGARDER LE FAISCEAU BEI FFNUNG LASERSTRAHLUNG DER KLASSE 2 NICHT IN DEN STRAHL SEHEN KLASSE 2 LASER STR LING NAR BEN STIR IKKE IND I LYSSTRALEN KLASSE 2 LASERSTRALING NAR APEN IKKE STIRR INN STRALEN STRALNING FRAN KLASS 2 LASER DA APPARATEN AR PPEN TITTA INTE IN LASERSTR LEN TURVALLISUUSLUOKAN 2 LASERSATEILY AVATTUNA ALA KATSO SATEESEEN pranama HARAR Cette tiquette est plac e sur le panneau lateral de droite de l unite Um die Gefahr von Br nden oder elektrischen Schl gen zu verringern darf dieses Ger t nicht Regen oder Feuchtigkeit ausgesetzt werden Um einen elektrischen Schlag zu vermeiden darf das Geh use nicht ge ffnet werden berlassen Sie Wartungsarbeiten stets nur qualifiziertem Fachpersonal WARNUNG Beim Einbau des Ger ts ist daher im Festkabel ein leicht zug
16. dling Discs The media protection function means that when a disc is loaded in the unit if you press the power button on the rear panel turning it off or disconnect the power cord to shut off the AC supply the unit switches automatically to standby off mode and prevent a disc error Handling Files 4 1 Overview When a computer is connected to this unit you can handle video and audio data as files 4 1 1 The following figure shows the directory structure of discs visible to a remote computer Directory Structure Chapter Windows root a INDEX XML ALIAS XML gt DISCMETA XML MEDIAPRO XML uJ nd Ind fu In SYSPRO XML p Clip C0001 MXF C0001M01 XML C0002 MXF C0002M01 XML C0003 MXF C0003M01 XML ni fi ug ind y ii E0001E01 SMI E0001M01 XML E0002E01 SMI ug I id my E0002M01 XML MI General a sub C0001S01 MXF 2 C0002S01 MXF mg In C0003S01 MXF a Root directory b Only when Naming Form is set to free in the File Name Setting section of the Option setting screen of the utility software 4 1 Overview sell4 BullpueH p Jeldedo 23 sell4 6ullpueH 181deu9 24 Macintosh root a A CLPR pS DISCINFO XML DISCINFO BUP
17. e the utility software and the other supplied software The XDCAM Drive Software see page 18 must be installed in advance e To disconnect the PDW U1 from a Windows computer run the Safely Remove Hardware dialog and then disconnect the cable Example connection ET USB cable 00000 00000 00000 00000 00000 USB To USB connector BE888 OO000 Spoon PDW U1 Laptop computer 3 2 Connections and Settings suoneledei4 1ejdeu9 19 suoneiedei4 84eldeuD 20 3 3 Power Preparations This unit can be powered by AC adaptor Connect a power cord and the AC adaptor to the DC power inlet connector page 15 on the rear panel of the unit It is not possible to power this unit through a USB cable 3 3 Power Preparations 3 4 Handling Discs 3 4 Handling Discs 3 4 1 Discs Used for Reading and Writing This unit uses the following professional discs for reading and writing PFD23 capacity 23 3 GB PFD23A capacity 23 3 GB PFDSODLA capacity 50 0 GB This unit cannot read or write the following discs Blu ray Disc Professional Disc for Data 3 4 2 Notes on Handling Handling The Professional Disc is housed in a cartridge and is designed to allow handling free of risk from dust or fingerprints However if the cartridge is subjected to a severe shock for example by dropping it this can res
18. es on Operation Specifications Specifications General Power requirements DC 12 V Power consumption 10 W Operating temperature 5 C to 40 C 41 F to 104 F Storage temperature 20 C to 60 C 4 F to 140 F Operating relative humidity 20 to 90 Less than 90 Mass 1 4 kg 3 Ib 1 oz External dimensions w h d 59 x 164 x 226 mm 23 8 x 6 x 9 inches 164 6 1 2 6 922 e sees C 8 Z 6S Ec y Unit mm inches System Reading Writing formats Video MPEG HD 50 35 25 18 Mbps MPEG IMX 50 40 30 Mbps DVCAM 25 Mbps Proxy video MPEG 4 Audio MPEG HD 16 bits 48 kHz 2 4ch or 24 bits 48 kHz 8ch MPEG IMX 16 bits 48 kHz 8 ch or 24 bits 48 kHz 4 ch DVCAM 16 bits 48 kHz 4 ch Proxy audio A law 8 4 channels 8 bits 8 kHz Recording Playback times single layer disc MPEG HD422 50 Mbps Approx 43 min MPEG HD 4 ch 35 Mbps Approx 65 min 25 Mbps Approx 85 min 18 Mbps Approx 112 min MPEG HD 2 ch 35 Mbps Approx 68 min 25 Mbps Approx 90 min 18 Mbps Approx 122 min MPEG IMX 50 Mbps Approx 45 min 40 Mbps Approx 55 min 30 Mbps Approx 68 min DVCAM Approx 85 min Recording Playback times dual layer disc MPEG HD422 50 Mbps Approx 95 min MPEG HD 4 ch 35 Mbps Approx 145 min 25 Mbps A
19. iance Connector Plug conforming to the proper ratings Voltage Ampere If you have questions on the use of the above Power Cord Appliance Connector Plug please consult a qualified service personnel CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT The PDW U1 is classified as a CLASS 1 LASER PRODUCT Laser diode properties Wavelength 400 to 410 nm Emission duration Continuous Laser output power 135 mW max of pulse peak 65 mW max of CW Tekniska data f r laserdiod V gl ngd 400 till 410 nm Emissionsl ngd Kontinuerlig Laseruteffekt 135 mW max f r pulstopp 65 mW max f r kontinuerlig v g Spesifikasjoner laserdiode B lgelengde 400 til 410 nm Str lingens varighet Kontinuerlig Laserens effekt 135 mW maks str letoppunkt 65 mW maks ved kontinuerlig str ling Laserdiodin ominaisuudet Aallon pituus 400 410 nm V lityksen kesto Jatkuva Laserl hd n teho 135 mW sykehuipun maks 65 mW jatkuvan aallon maks CAUTION For U S A CAUTION ATTENTION VORSICHT ADVARSEL ADVARSEL VARNING VARO For EUROPE Er han This label is located inside the right side cover of the unit Denna etikett finns p den inre h gra sidan av enheten Denne m rkat sidder pa h jre side inde i drevenheden T m kyltti sijaitsee laitteen kotelon sis pinnan oikealla puolella Dette merket er plassert til h yre
20. ing and Writing pe 20 3 4 2 Notes on Handling ee 20 3 4 3 Write Protecting Discs pe 21 3 4 4 Loading and Unloading a Disc ee 21 3 4 5 To Eject Discs With the Unit Powered Off 21 3 4 6 Media Protection Function ee 22 Handling Files 4 1 OT A AT a 0 E T 23 4 1 1 Directory Structure 23 4 1 2 File Operation Restrictions ps 24 4 2 Preparations for File Access esse 28 4 3 File Access Operations crccsssorsonssossonennnsnessnnsnessnnsnsnsnnennennnenen 28 Table of Contents 7 8 Chapter 5 Appendix Using the Software 5 1 Starting and Exiting the Utility Software ss 30 ORAL Starting nee neueste 30 521 2 Exiting na anna Barren aihnealine 31 5 2 Starting and Exiting the PDZ 1 Proxy Browsing Software Windows only seen 31 I 2 StaftIH8 yor en uses eect sti ha sts 31 5 2 2 Exiting ee A tn AR Awaited ean 32 5 3 Starting and Exiting the PDZ VX10 XDCAM Viewer Windows only 0060000 32 II F Stammes date dre reste 32 5 3 2 Exlling 2 Metisse ei Se hae after 32 5 4 Starting and Exiting the PDZK P1 XDCAM Transfer Macintosh only crsssrsosssorsonssossonennssnnennnsnnsnnssnnssnssnnsnnnsnne 33 SAAT Startins She a nd E 33 5 422 Exlling anne en ee at Saer e E a ane 33 Important Notes on Operation esse 34 Condensation a nd dee A GE 34 SPECI CATIONS iiss sssesesessscosssendcesssosccasssasoosstacsesseosesssoadeastnascessensoessoss 34 Table of Contents Overview
21. ing the PDZK P1 XDCAM Transfer Macintosh only 5 4 1 Starting First make sure that this unit is connected to the computer For connection details see 3 2 1 Connecting to a Computer page 19 With the computer connected to this unit carry out any of the following e Open the folder that you saved the PDZK P1 and double click XDCAM Transfer Double click the XDCAM Transfer icon in the Finder Select File gt Import gt Sony XDCAM When this software is launched an icon is displayed in the Dock 5 4 2 Exiting Select Quit XDCAM Transfer from XDCAM Transfer menu 5 4 Starting and Exiting the PDZK P1 XDCAM Transfer Macintosh only eiemyos eu BulsN 94eldedD 33 xlpueddy 34 Appendix Important Notes on Operation Condensation When this unit is moved from a cold place to a warmer place or operated in high humidity condensation may form on the optical pickup If the unit is operated in this state it may make correct reading and writing impossible Note the following points to avoid problems with condensation If moving the unit in conditions where condensation is possible make sure the disc is inserted in advance When the power button is on if the ERROR ALARM indicator lights and HUMID appears in the utility software alarm log do not insert a disc until the indicator has gone off Important Not
22. is flashing four times a second and it is not possible to check the alarm log a malfunction may have occurred In this case contact your Sony service representative When the error is eliminated the indicator goes off DISC IN indicator Lights green when a disc is loaded Manual eject mechanism When there is no power supply to the unit to eject the disc remove the cover over this part then turn the screw counterclockwise with a Phillips screwdriver For details see 3 4 5 To Eject Discs With the Unit Powered Off page 21 EJECT button Ejects a disc see page 21 This button is disabled while the disc is being accessed Either stop accessing the disc before ejecting or eject by an operation from the computer Disc slot With the label surface on the right insert the disc see page 21 2 2 Rear Panel power button Use this button to switch between active and standby USB connector Hi speed USB Use the supplied USB cable to connect to the computer If the video and audio are not output on a computer connected using the USB connector try disconnecting the USB cable and reconnect making sure it is correctly inserted DC power inlet connector Connect to the AC power using the supplied AC adaptor and a power cord not supplied Security slot You can fit a commercially available security
23. me in the C part is also deleted automatically Directories cannot be created in the Clip directory 26 a The unit can handle files with user defined names in the E part b Only files which can be written by an XDCAM device Partial writing is not possible c Only files which can be written by an XDCAM device d When the Make the drives RecInhibit check box is not checked in the Utility Software e When the E part of an E 01 SMI file name is changed an E MO1 XML file with the same name in the E part is also changed automatically f When an E E01 SMI file is created an E MO1 XML file with the same name in the E part is also generated automatically g When an E E01 SMI file is deleted an E MO1 XML file with the same name in the E part is also deleted automatically 4 1 Overview File name Content Operations Read Overwrite Rename Create Delete E E01 SMI Clip list file Yes Yes gt Yes Yes 9 Yes 9 0001 to 0099 o E M01 XML 2 Metadata file Yes Yes P No No No 2 D generated 3 automatically when gt E E01 MXF file is I created 3 0001 to 0099 E Other files Files other than the No No above 8 Directories cannot be created in the Edit directory Sub directory File name Content Operations Read Overwrite Rename Create Delete C S01 MXF Proxy AV data MXF
24. ng Software installed is connected to this unit you can transfer the proxy AV data and metadata files recorded on a disc to the computer On the computer side PDZ 1 enables you to browse the proxy AV data add or modify metadata titles comments essence marks etc or create a clip list For the functions and operation details of the PDZ 1 Proxy Browsing Software refer to the help file Using the PDZK P1 XDCAM Transfer Macintosh only Using the PDZK P1 XDCAM Transfer you can transfer data recorded in an XDCAM device as a file to the Apple Final Cut Pro video editing software You can also browse transferred proxy AV data and view clips and thumbnails For more details of the functions and operating methods of the PDZK P1 XDCAM Transfer refer to the help file The results of editing cannot be written back to the disc loaded in the PDW U1 using the PDZK P1 XDCAM Transfer 4 3 File Access Operations sell4 6ullpueH p Jeldedo 29 alemyos y 6ulsn 9eldeuD 30 Using the Software 5 1 Starting and Exiting the Utility Software 5 1 1 Starting First make sure that this unit is connected to the computer For connection details see 3 2 1 Connecting to a Computer page 19 On a Windows computer With the computer connected to this unit carry out any of the following e Open the folder in which the utility software is installed then double click on Ul_Utility exe Click the
25. nglicher Unterbrecher einzuf gen oder der Netzstecker muss mit einer in der N he des Ger ts befindlichen leicht zug nglichen Wandsteckdose verbunden werden Wenn w hrend des Betriebs eine Funktionsst rung auftritt ist der Unterbrecher zu bet tigen bzw Der Netzstecker abzuziehen damit die Stromversorgung zum Ger t unterbrochen wird WARNUNG 1 Verwenden Sie ein zugelassenes Netzkabel 2 Leiter Netzkabel und einen Ger testecker die den Sicherheitsvorschriften des jeweiligen Landes entsprechen falls zutreffend 2 Verwenden Sie ein Netzkabel 2 Leiter Netzkabel und einen Ger testecker die den Leistungsanforderungen Spannung Stromst rke gen gen Falls Sie Fragen zum Gebrauch des obigen Netzkabels Ger testeckers haben wenden Sie sich bitte an qualifiziertes Kundendienstpersonal F r Kunden in Europa Der Hersteller dieses Produkts ist Sony Corporation 1 7 1 Konan Minato ku Tokyo Japan Der autorisierte Repr sentant f r EMV und Produktsicherheit ist Sony Deutschland GmbH Hedelfinger Strasse 61 70327 Stuttgart Deutschland Bei jeglichen Angelegenheiten in Bezug auf 5 6 Kundendienst oder Garantie wenden Sie sich bitte an die in den separaten Kundendienst oder Garantiedokumenten aufgef hrten Anschriften Eigenschaften der Laserdiode Wellenl nge 400 bis 410 nm Emissionsdauer Ununterbrochen Laser Ausgangsleistung 135 mW max Impulsspitze 65 mW max Dauerstrich LASER RADI
26. operation is not guaranteed on all computers 1 3 Supplied Software 13 sled Jo suolounj pue seweN 2 1e1deu9 14 Names and Functions of Parts 2 1 Front Panel 8 os ol Iln ols Ir AE EuEcT Oo power indicator Lights green when the power button on the rear panel is on ACCESS indicator Flashes blue when the disc is being accessed from the computer If the power button on the rear panel is pressed turning it off then the unit goes into the standby mode Do not press the amp power button on the rear panel to turn off or disconnect the power cord while the ACCESS indictor is 2 1 Front Panel Chapter flashing Doing so may lead to a loss of data on the disc ERROR ALARM indicator If a fault occurs in the unit this lights continuously or flashes red as shown in the following table Indicator Meaning Condensation has occurred Lit continuously An error occurred principally a hardware default Flashing four times a second An alarm not listed above occurred Flashing once a second The indicator may flash or light only for five seconds depending on the alarm You can check alarms generated by this unit using the alarm log of the utility software For details refer to the help file of the utility software If the indicator
27. owsing Software Microsoft Windows XP Professional Service Pack 1 or later or Microsoft Windows Vista Business Ultimate 32 bit or later 1 2 1 3 Supplied Software Item Software Requirement Web XDCAM Drive Software browser Utility Software 9 Ey PDZ VX10 XDCAM Viewer 2 PDZ 1 Proxy Browsing Software Internet Explorer 6 0 Service Pack 1 or later Q Other XDCAM Drive Software High Speed USB host controller is lt necessary to connect to this unit 2 Utility Software Hi Speed USB USB 2 0 PDZ VX10 XDCAM Viewer DirectX 9 0c or later installed 2 PDZ 1 Proxy Browsing Software DirectX 8 1b or later installed e Windows Media Player 9 0 or later is necessary to use ConvertToASF function a If the computer is equipped with a GPU that supports DirectX 9 0c the playback performance will be improved Macintosh Item Requirement Processor PowerPC G5 2GHz Intel Core 2 Duo 2 GHz Intel Xeon 2 GHz or higher Memory 1 GB or more Free hard 2 GB or more disk space Monitor Resolution 1280 x 1024 pixels or better Operating Mac OS X v10 4 11 or later system Other Hi Speed USB USB 2 0 AGP Quartz Extreme PCI ExressGraphic Card QuickTime 7 3 1 or later Final Cut Pro 6 0 2 or later or latest Apple Pro Application For more details of each software see page 30 With regard to the above operating environment
28. p innsiden av enheten CAUTION The use of optical instruments with this product will increase eye hazard CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure VAROITUS LAITTEEN K YTT MINEN MUULLA KUIN T SS K YTT OHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA K YTT J N TURVALLISUUSLUOKAN 1 YLITT V LLE N KYM TT M LLE LASERS TEILYLLE VARNING OM APPARATEN ANV NDS P ANNAT S TT N I DENNA BRUKSANVISNING SPECIFICERATS KAN ANV NDAREN UTS TTAS F R OSYNLIG LASERSTR LNING SOM VERSKRIDER GR NSEN F R LASERKLASS 1 For the customers in the USA This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the follo
29. pplied with the unit Software Supported OS Function Ref page XDCAM Drive Software Windows Allows video and audio data to be handled as files on a computer connected to this unit 17 Utility software Windows Macintosh Provides the following functions on a computer connected to this unit e Displaying device information Disc format and recovery e Firmware updates e Making settings Windows only 17 30 Help PDZ 1 Proxy Browsing Software Windows Organizes clips recorded on a Professional Disc You can play back clips that have been shot and select and mark particular portions for subsequent editing With the PDZ 1 software you can also create a simple editing list by arranging clips and portions of video around marked shots By connecting to a Professional Disc device you can also attach marks and comments to recorded clips 17 29 31 Help PDZ VX10 XDCAM Viewer Windows This allows material recorded on a Professional Disc MXF files to be played back as audio and video for checking You can play not only proxy AV data but also the material at its original image quality You can also check the MXF file metadata start timecode and so on 17 32 Help PDZK P1 XDCAM Transfer Macintosh You can edit material recorded on a Professional Disc MXF files with the Apple Final Cut Pro video editing software 18 29 33 Help
30. pprox 190 min 18 Mbps Approx 248 min MPEG HD 2 ch 35 Mbps Approx 150 min 25 Mbps Approx 200 min 18 Mbps Approx 265 min DVCAM Approx 185 min Output input connector USB Connector High Speed USB support Accessories supplied Operation manual 1 PDW U1 CD ROM 1 XDCAM Drive Software Utility Software XDCAM Application Software CD ROM D PDZ 1 Proxy Browsing Software PDZ VX10 XDCAM Viewer PDZK P1 XDCAM Transfer AC adaptor 1 468 626 6x 1 USB cable 1 757 429 2x 1 x puoddy Accessories not supplied AC power cord 1 Specifications 35 x puoddy 36 For the customers in the U S A and Canada Part No 1 757 562 1x 125 V 7 A about 2 0 m For the customers in European countries Part No 1 575 131 8x 250 V 2 5 A about 2 0 m Design and specifications are subject to change without notice Notes e Always make a test recording and verify that it was recorded successfully SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING BUT NOT LIMITED TO COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF FAILURE OF THIS UNIT OR ITS RECORDING MEDIA EXTERNAL STORAGE SYSTEMS OR ANY OTHER MEDIA OR STORAGE SYSTEMS TO RECORD CONTENT OF ANY TYPE Always verify that the unit is operating properly before use SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING BUT NOT LIMITED TO COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR
31. reen or use a log deletion function When User Account Control is disabled Windows Vista willnot open a dialog confirming the elevation of privileges and the utility software will run with Administrator privileges In this case you can use all the functions of the utility software On a Macintosh computer Open the folder in which the utility software is installed and then double click U1 Utility This displays the home window of the utility software 5 1 2 Exiting On a Windows computer Click the x close button in the top right corner of the window On a Macintosh computer From the U1 Utility menu select Exit Ul Utility 5 2 Starting and Exiting the PDZ 1 Proxy Browsing Software Windows only 5 2 1 Starting First make sure that this unit is connected to the computer For connection details see 3 2 1 Connecting to a Computer page 19 With the computer connected to this unit carry out any of the following Copying Data to the PC Before Operation File Download Mode Click the Windows Start button then select All Programs gt PDZ 1 gt PDZ 1 If the PDZ 1 software is started for the first time after installation the Browse for Folder window appears Select the folder in which the PDZ 1 data is to be saved in this window From the second time you start the application on the PDZ 1 main window appears Reading and Writing Data Directly from to a P
32. rofessional Disc Direct Access Mode Click the Windows Start button then select All Programs gt PDZ 1 gt PDZ 1 Direct Mode The PDZ 1 main window appears The title of the main window is PDZ 1 FAM Direct Mode 5 2 Starting and Exiting the PDZ 1 Proxy Browsing Software Windows only eiemyos ay BulsN 94eldedD 31 alemyos ey 6ulsn 9eldeuD 32 5 2 2 Exiting On the menu bar click File gt Exit in turn 5 3 Starting and Exiting the PDZ VX10 XDCAM Viewer Windows only 5 3 1 Starting First make sure that this unit is connected to the computer For connection details see 3 2 1 Connecting to a Computer page 19 With the computer connected to this unit carry out any of the following e Click the Windows Start button and then select All Programs gt Sony XDCAM Viewer Double click an MXF file in Windows Explorer or right click and select Play with Sony XDCAM Viewer A new instance of XDCAM Viewer starts with the file loaded every time you double click an MXF file Double click the Sony XDCAM Viewer icon on the desktop when you have created a shortcut icon 5 3 2 Exiting Do one of the following e Select Exit in the File menu e Click the x close button in the top right corner of the window 5 3 Starting and Exiting the PDZ VX10 XDCAM Viewer Windows only 5 4 Starting and Exit
33. ten by an directory 3 XDCAM device at e The directories in the root directory Clip Edit Sub PROAV and General F cannot be deleted or renamed a 5 a T Clip directory gt File name Content Operations Read Overwrite Rename Create Delete C MXF a Clip file created by Yes Yes b c Yes Yes b Yes d recording MXF file 0001 to 9999 C M01 XML Metadata file Yes Yes No No No generated automatically when C MXF file is created 0001 to 9999 Other files Files other than the No u No F above a The unit can handle files with user defined MPEG HD IMX and number of audio names in the C part channels of the recorded sections of the disc b Only files which are 2 seconds or longer in and which can be overwritten by an XDCAM length in a format matching the format device system frequency and recording format c Overwriting is not possible 4 1 Overview 25 d When the Make the drives RecInhibit check box is not checked in the Utility Software you can select and delete any clip e Only files which can be written by an XDCAM device f When the C part of a C MXF file name is changed a C MO1 XML file with the same name in the C part is also changed automatically Edit directory g When a C MXF file is created a C M01 XML file with the same name in the C part is created automatically h When a C MXF file is deleted a C M01 XML file with the same na
34. ult in damage or scratching of the disc If the disc is scratched it may be impossible to record video audio or to play back the content recorded on the disc The discs should be handled and stored carefully e Do not touch the surface of the disc itself within the cartridge Deliberately opening the shutter may cause damage Do not disassemble the cartridge The supplied adhesive labels are recommended for indexing discs Apply the label in the correct position Storage Do not store discs where they may be subjected to direct sunlight or in other places where the temperature or humidity is high Do not leave cartridges where dust may be able to gain ingress e Store cartridges in their cases Care of the discs Remove dust and dirt on the outside of a cartridge using a soft dry cloth If condensation forms allow ample time to dry before use 3 4 3 Write Protecting Discs To protect the content recorded on the disc from accidental erasure move the write protect tab on the lower surface of the disc in the direction of the arrow as shown in the following figure Lower surface of the disc Write Inhibit tab Slide in the direction Write Inhibit of the arrow tab settings SAVE gt SAVE Recording Recording enabled disabled 3 4 4 Loading and Unloading a Disc To load and unload a disc press power button to turn the unit on and light the indicator
35. wing measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help If you have any questions about this product you may call Sony Customer Information Service Center 1 800 222 7669 or http www sony com Declaration of Conformity Trade Name SONY Model PDW U1 Responsible Party Sony Electronics Inc Address 16530 Via Esprillo San Diego CA 92127 U S A Telephone Number 858 942 2230 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation 4 You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment All interface cables used to connect peripherals must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules For the customers in Europe The manufacturer of this product is Sony Corporation 1 7 1 Konan Minato ku Tokyo Japan The Authorized Representative for EMC and product safety is
Download Pdf Manuals
Related Search