E-bot English Manual - Updated Sept 2014
Contents
1. The E bot is ready for use 3 2 Folding the E bot Grip the camera part and fold it downward 12 Page While holding the arm lock button fold the longer camera arm downward Le 3 3 Inserting the Battery Grip the E bot s main body and insert the battery 2 When the battery is fully inserted you will feel and hear it click in to place Page 13 3 4 Removing the Battery Lift the battery release button on the back side of the unit While lifting the battery release button pull the battery out of the compartment 3 5 Charging the E bot 3 5 1 Charging via the AC Adapter AD aljo o HDMI DC OUT Chantel DC IN 14 Page The DC jack is located on the back side of the E bot 2 When E bot is connected to the AC adapter the battery is being charged X Note When you use the E bot for the first time or after a long period of disuse please allow the unit to charge for more than 5 hours 3 5 2 Charging via USB Connect the flatter end of the USB 3 0 cable to the USB port on your PC 2 Connect the smaller larger end of the USB 3 0 cable to the USB port on the back side of the unit e e _ SS amp HDMI DCOUT Channel DC IN X Note If you connect the E bot to a computer via USB while E bot is powered off the E bot s battery is charged H2. prevent electrical shock or fire Do not touch the AC adapter with wet hands Use only the AC adapter provided with the E bot Using another AC adapter may damage the device Be advised that damage caused by misuse is not covered by the warranty Please do not remove the power cable when the E bot is turned on as this can damage the product Do not use the E bot in a moisture rich environment such as a bathroom shower or a wet kitchen counter as moisture may get inside the unit and damage the components Do not use E bot in extreme high or low temperatures We recommend that you do not use this device in environments below 0 C or above 40 C as the image may display inaccurately Always turn off the power before moving the product to another location When you press the release switch to fold the E bot please grip the arm and manually fold the unit Allowing the arm to simply drop may cause impact damage to the unit Do not use the DC OUT at the back of the device as a power supply for devices other than authorized visual displays for E bot as this can damage the product and or the connected device 4 Page 1 2 3 Table of Contents Package Contents 6 E DOt OTSNTatO Mesne aa andreas El Zar MVC UVLO W rca ion 7 2 2 BACK Side OF E SDO Luena dp arder Zas SIGS ONE DOL iii nico ida 8 ZA EON Ol E DO darias di ARA 9 EHD OLS Cl Dina id 10 3 1 Unfolding ING E200 di aa 10 3 2 Folding the es OG si tsa e hanes
3. Electronic Reading Magnifier E bot 2 Page Congratulations on your purchase of the E bot The E bot short for Education Robot is a transportable video magnifier designed to meet the needs of the low vision student in a variety of situations However its flexibility and versatility make it an excellent product for low vision users of all ages The E bot provides close up and distant magnification as well as connectivity to a variety of devices including monitors computers and iOS and Android tablets E bot offers a variety of powerful features for low vision students and users of all ages including the following 1 View images on the included reading table or on a whiteboard or presentation screen several feet away 2 Adjust color contrast and magnification levels for best viewing for your visual condition 3 View images on a large monitor or TV the screen of your Mac or PC or an iPad or Android tablet 4 Manipulate image viewing in a variety of ways including using the main controls on the unit the keyboard and mouse of your computer or the touch screen of your iPad or Android tablet 9 Easily transport from classroom to classroom work to home etc Safety Precautions For your safety and protection of the E bot please read and abide by the following important safety precautions 1 Do not plug the AC adapter into a faulty electrical outlet This is to 2 3 4 5 6 7 8 9 Page ila
4. IMPORTANT Read carefully before using this software E bot Viewer Software lt E bot Viewer gt 1 0 Date of publication May 12th 2014 Cancel Nullsoft Install System v2 46 4 When you press this I Agree button will pop up following window for selecting the installation path In the installation path window select the path and click Install button Setup will install E bot Viewer in the following folder To install in a different folder click Browse and select another folder Click Install to start the Space available 868 8GB Cancel Nullsoft Install System v2 46 lt Back Disconnect the E bot from the PC and proceed with the installation Page 19 Please be sure to unplug E bot from your PC Do you want to start installation The installation is in progress E bot Viewer Setup Installing Output folder C Program Files x86 E bot driver Show details Cancel Nullsoft Install System v2 46 lt Back Close Installation is successfully completed PC 4 3 2 Installing the Mac Viewer Program Insert the installation CD into the Mac The Installation program should run automatically If not 20 Page please open the CD ROM drive in Finder The CD contains two files E BOT Driver Software v1 5 0 for MAC OS X reboot zip and EBotViewerForOSXx v1 0 1 zip First extract E BOT Driver Software v1 5 0 for MAC OS
5. X reboot zip to the desktop Run E BOT Driver Software v1 5 0 for MAC OS X reboot pkg Check the below window and click the continue button 600 w Install E BOT Driver Software v1 5 0 for MAC OS X Welcome to the E BOT Driver Software v1 5 0 for MAC OS X Installer 5 Introduction You will be guided through the steps necessary to install this software Destination Sele Go Back Continue Select Install for all users of this computer and click the continue button Page 21 How do you want to install this software 7 Install for all users of this computer Installing this software requires 258 KB of space You have chosen to install this software for all users of this computer Go Back Continue Check the required space on the Mac and click the Install button It needs 258KB to install Introduction Destination Se Standard Install on Macintosh HD This will take 258 KB of space on your computer Click Install to perform a standard installation of this software on the disk Macintosh HD GoBack Install Rebooting is required to finish the installation Please click the Continue Installation button 22 Page O00 Install E BOT Driver Software v1 5 0 for MAC OS X r When this software finishes installing you must restart your computer Are you i sure you want to install the software now D
6. all option settings return to the status they were in before sleep mode was activated When the power is turned on press and hold the power button for more than 2 seconds to power the unit completely off X Note The advantage of Sleep mode is that loading time is shortened X Note If the E bot is in the folded position it cannot be powered on If the E bot is folded when it is turned on the power shuts completely off except in the case of Sleep Mode as described above 30 Page Page 31 6 2 Magnification You can change the magnification level to suit your visual needs and the size of the print you re currently reading 6 F AN f ff o gt Teen gt Y J KN y S gt A MODE CONTRAST v Press the Zoom In button to increase the magnification level Press the Zoom Out button to decrease the magnification level As you press and hold either of these buttons the magnification level is adjusted continuously The magnification level ranges from 1 to 62 Levels 1 to 40 are optical magnification and levels 41 to 62 are digital magnification 6 3 Changing the Color Mode You can change the color of the text and or background on the screen to accommodate your visual needs in regards to text type and your visual condition Po y MES s 4 N MS al gt RI gt MODE S CONTRAST Press the Previous mode button to change to the previous color mode To change to the next color mode pres
7. Channel Values You can check the channel values on the rear of the main body An arrow is pointing to the currently set value Bl e A HDMI DC OUT X Note You can upgrade your E bot to E bot ADV by matching channel values between main body and the wireless controller For information on upgrading E bot please refer to section 9 of this manual 6 10 Volume Up Down E bot s volume dial is located on the right side of the body Turn the dial away from you and the volume is increased turn the dial toward you and the volume is decreased g aw g a IO Volumes 7 X Note Voice feedback is available only if the E bot is Page 37 upgraded to E bot ADV For information on upgrading E bot please refer to section 9 of this manual 6 11 Turning Wi Fi On Off To connect to a computer or Tablet via Wi Fi set the E bot Wi Fi switch on the right side of the unit to ON OFF ON Wi Fi an Volume 7 Advanced Features 7 1 Color Mode Settings You can set the color mode to best accommodate your visual condition or the material you are reading You can also disable color modes that are not useful to you 7 1 1 Setting the color mode You can modify color modes to set them as color combinations you frequently use You can modify all color modes except for Natural color mode Bring up the option by pressing both the Previous color button and Next color button on the top of the m
8. the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CAUTION Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user s authority to operate the equipment
9. 11 33 ANSOTUINO INS Balto Yo eras 12 3 4 Removing the Battery SAA 13 3 5 Charging the E bot Lai 13 How to Connect to Display Devices ccc cence cece eee e ee ne eee eneeeees 16 4 1 Connecting a Monitor via HDM1 ccc cence eee ee eee ennnes 16 4 2 Connecting a Portable Monitor ccc ccc cece eee ee eee ee ee een ees 16 4 3 Connecting to a PC or a Masia ii ii 17 4 4 Connecting to an Apple iPad or Android Tablet via Wi Fi 25 Changing Camera MOS e tcs 28 Using the Control Panel on the Main BOdY oooococcccoccconccconcccnnncnnnnnnnos 29 Gad POW ONO SS 29 6 2 MaghnificatON tesis onda 31 6 3 Changing the Color Mode 00 ccc cence nee cnn rancia nnn 31 64 CONS siria a aaa olaa 32 6 5 Finding your current Reading PositiON oooocococccccccccnnccccnnnnoos 32 570 FOCUS LOCK cna ii ipod 33 OF A A O 34 050 INTO RMAC ON acta 35 6 9 Main Body Channel Values iitai iia 36 Page is A sca ator cat see ase cassette coe ecsla aoe Volume Up Down 36 A et ee RN T Me E Turning Wi Fi On Off 37 ls Advanced Feature ia a A EA OEE TATARAN 37 LA Color Mode Seting Site ca siticis rents a a a T R 37 O PRGTCI ON COS iria irritada a a E 39 Di WC O oes oa a pores aan ears an coos ge psoas aenean gaa cun et aaat ck 43 10 Tablet Viewer Gestures insrici rai oia 45 11 Quick Guide to PC or Mac Operati0NS oooooccccccccccconnnncconnnnnconnnnnnoos 46 1
10. 11 Quick Guide to PC or Mac operations ee Keyboard Mouse Zoom in Wheel Upwards Page 47 o DN B Next Color M 5 Left Click aX Previous Color shift Close he Mode 48 Page 12 Troubleshooting 12 1 The E bot does not turn on when you press the power button a E bot s battery may be discharged Please connect the power cable b Please be sure the monitor is powered on c Make sure the E bot is unfolded The E bot cannot be powered on in the folded position 12 2 You cannot see the texts clearly a Make sure the focus is not locked In Focus Lock mode E bot doesn t focus automatically Switch to Auto Focus by pressing both the Contrast Increase button and Contrast Decrease button on the top of the main body b Adjust the contrast by using the Contrast button c If viewing glossy pages please turn off the light to avoid glaring d Be sure the camera lens is clean If there is dust on the camera the image will not look like it s in focus and the auto focus will not work properly Clean the camera with the cleaning cloth 12 3 You cannot execute the color mode settings a Check the current color mode Be sure you are not using Natural Color Mode You must be using color modes 1 6 to adjust the color mode settings 12 4 lf the Wi Fi password is incorrect or you have forgotten the Wi Fi password a Please initialize the option settings and it will be returned to 00000000 P
11. 2 TEOUDISSNOO UN isis io 48 WV CUED CULL ch soe est a eect eels tence ites ii an AE ena Rha E es eaten 49 CUSOMEN SUPLIR RIE 49 FCC Warming id adios bncda lanes ons tak wa aeeadangsdanana E E TE ATARA 50 6 Page 1 Package Contents When you receive your E bot please make sure that the following items are included with your package 1 E bot 2 E bot Battery 3 AC Adapter 4 Cables USB 3 0 HDMI 5 HDMI to DVI Gender Adapter 6 Carrying Case T User Guide PC and Mac Installation Program CD Page 7 2 E bot Orientation 2 1 Overview Camera Control Panel Camera Arm 2 2 Back Side of E bot 8 Page USB 3 0 Port Channel Switch HDMI Port AD 133 Channel DCIIN DC OUT Port DC IN Port Battery Release Button 2 3 Side of E bot A Wi Fi a ee Cue E eee Volume a P 2 4 Front of E bot Power Button Mode Button eds Zoom Button Power Indicator A Contrast Button gt O Py Wi Fi Indicator Light Button 10 Page 3 E bot Setup 3 1 Unfolding the E bot Follow the instructions below to unfold the E bot Press and hold the arm lock button on the left side of the E bot i While holding the arm lock button unfold the longer camera arm upward Then grip the camera part and unfold it upward as well Page 11
12. 8 Page 5 Changing Camera Modes 0900 gt Distance Viewing Mode Near Viewing Mode E bot has two camera modes near view mode and distance view mode Flipping down the close up lens switches to distance viewing mode Flip the close up lens closed to switch back to near viewing mode X Note Magnification color mode and function settings for each mode are saved separately So when switching the camera mode the settings are automatically changed to the settings you last used for that mode 6 Page 29 Using the Control Panel on the Main Body 6 1 Power On Off sg es SZ A jm EO Z D Na LX XN LY MODE CONTRAST Press and release the power button on the E bot s main body to power the unit on or off 2 The HIMS logo appears and loading time takes 30 to 40 seconds When the power is turned on the boot up sound is heard and the Power Indicator changes to green When the battery is being charged the Power Indicator is colored red 4 Press the power button briefly again to place the E bot into sleep mode If you fold the E bot while in sleep mode the unit does not power off but rather remains in Sleep Mode Thus pressing the Power button quickly wakes up the unit from sleep mode as it normally would When the unit is awaken from sleep mode
13. age 49 Warranty 1 The Warranty term is 2 years from the date of purchase 2 Warranty does not cover problems arising from damage caused by the user including but not limited to damaged caused by external force or damage caused by introducing liquid in to the unit 3 Disassembling of the unit by anyone other than an authorized repair technician will void the warranty Customer Support Manufacturer HIMS International Manufacturer Address 174 Gajeong ro Yuseong gu Daejeon Korea 305 350 E mail sale himsintl com Phone Number 042 864 4601 FAX 042 864 0133 50 Page FCC warning NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase
14. ain body for more than 2 seconds while using the view in which you want to change 38 Page 6 CO A Y i rA aq DA E q D N J s ON y XA Ni MODE NY CONTRAST You can modify 6 color modes Select the mode you want to set X Note In the Natural color mode you cannot change the color 3 The text color is displayed on the screen Select the color of the text using the Previous color button and Next color button You can save the wanted color by pressing both the Previous color button and Next color button Select the Background color when you have finished selecting the text color Use the same method as when setting the text color lf Grayscale is chosen when selecting the text color the Color setting mode is exited without selecting a Background color After you have selected the background color by pressing both the Previous color button and Next color button you are returned to the view mode 8 Page 39 Preferences 8 1 Using headphones You can hear the voice in a public place or classroom by using the headphones OFF ON Wi Fi _ l A NI CEIS m 7 X Note Use only standard headphones Headsets with built in microphones such as Apple earbuds will not work with E bot 8 2 Initialization Set the settings back to the factory defaults 2 When you turn on the device press the Light button until you see the HIMS logo 8 3 Wi Fi password chan
15. aracter you want to type and the Enter button to input the character If the certification number matches the upgrade to E bot ADV is complete e Checking the Main Body Channel Values Please check the channel values on the rear of the main body n arrow points to the currently set value HDMI DC OUT l Channel DC IN e Checking the Wireless Controller Channel Value Remove the battery cover from the back of the wireless controller 44 Page sur O NnNnoCDa330 O SNIH JO OLQUOS AGW OQ El O O Bo Y 2 Check the channel setting switch It can set the channel values as shown in the below picture Make sure it is set to the same channel value as the one shown on the main body of your E bot If the channel value is different please use a screw driver or your fingernail to change the setting X Note If the wireless controller does not operate even though the channel value is the same please change the battery in the wireless controller Page 45 Tablet Viewer Gestures Tablet Functions Gesture Move fingers away from each other Control Menu Control Menu 46 Page mode _ One finger Tap on he i Focus Lock PECON On Focus Lock Of Contrast One finger or to right set Color one Mode One finger Tap on the left end of the screen and flick to right onion One finger Tap on the cancel icon
16. en the installation is complete turn on the E bot Then turn on the Wi Fi switch on the right side Once Wi Fi is turned on the Wi Fi indicator light on the main body appears blue Be sure Wi Fi is ON on your tablet then select and connect to E bot from the Wi Fi networks list For example Ebot_03XX Page 27 iPad Qu 9 19 16 gt Settings Wi Fi Airplane Mode y Belkin N a gt O gt Wi Fi Belkin_N CHOOSE A NETWORK Bluetooth CYLOD HQ a gt n DIRECT UsSCX 3400 a F Notification Center Control Center Do Not Disturb O OIO E iptimeWooriro a i rl a NETGEAR a e 0 Wallpapers amp Brightness NETGEAR_Hims a gt Sound NETGEAR_Hims 5GHz a s 0 o Passcode uniinfo Y Privacy Other a Cloud Ask to Join Networks O j Known networks will be Jo ned automatica ly f no known networks are available you will be askec O Mail Contacts Calendars before joining a new networ 4 Connecting to E bot requires a network key By default it is 00000000 Enter the network key and connect as you would normally connect to a Wi Fi network on your tablet Run the E bot Viewer app on your tablet and make sure that the image Is displaying correctly X Note In the E bot s options menu you can change the Wi Fi password X Note For instructions on controlling E bot using an iPad or Android tablet please refer to section 10 of this manual 2
17. estination Aa s O Installatidf E x O Summa f eho SS ii ny a v o E Go Back Installation begins It requires around 1 minute 0080 Install E BOT Driver Software v1 5 0 for MAC OS X installing E BOT Driver Software v1 5 0 for MAC OS X Introduction Destination Sele Go Back Continue a After finishing Installation please click the Restart button to reboot your Mac Page 23 eno Install E BOT Driver Software v1 5 0 for MAC OS X The installation was completed successfully Introduction Destination Sel installati Installation d The installation was successful The software was installed Click Restart to finish installing the software 2 After rebooting please extract files from EBotViewerForOSX v1 0 1 zip to the desktop 43 Installation is complete Please connect E bot PRO to Mac and run file EbotViewerForOSX of folder v1 0 1 4 3 3 Connecting to the PC Viewer Program and Mac Viewer Program with E bot 1 Connecting to a PC via USB Connect the E bot s USB 3 0 port to the USB port of your PC using the included USB 3 0 cable 2 And run the E bot viewer program on your PC Select USB as the connection method 24 Page USB 3 0 X Note When connected to USB 2 0 USB 2 0 will be displayed X Note for Mac only USB 3 0 connectivity is supported Y USB 2 0 X Note If you co
18. focus on the text rather than allowing the auto focus to follow your hand or pen 34 Page TTTS f JD CED dh F y Y one ff j k j r SY See ee MODE NA CONTRAST Press both the Contrast Increase button and Contrast Decrease button on the top of the main body When focus lock is activated the Focus Lock icon is displayed on the top right of the screen X Note Focus is unlocked automatically when the camera is switched from Distance view mode to Near view mode or when powering off when focus is locked 6 7 Light On Off In the near view mode the built in light is automatically turned on to ensure a clear image E bot contains a sensor to detect the amount of illumination in your current Surroundings and contrast is automatically adjusted according to the ambient brightness Page 35 F IN MES Z EM Z Eo a ao CONTRAST aN AI AS MODE Press the Light button to turn the lights on or off When viewing glossy objects please turn off the light to avoid glaring X Note When using distance view mode the light is not turned on 6 8 Information You can check general information about the E bot O F Ss GY 73M rs pl LA MODE NS CONTRAST Press the Next Mode button and Contrast Decrease button 36 Page together You can check the following information about E bot e Software version e Products serial number e Battery status e Wi Fi AP 6 9 Main Body
19. ge An eight digit number is needed to connect E bot to Wi Fi using an iPad Android tablet or PC The default password is 00000000 To change the password follow the instructions below Bring up the Wi Fi Password Dialog by pressing the Previous color Next color Contrast Decrease and Contrast Increase buttons on the top of the main body all together for more than 5 seconds 40 Page 4 Na Pen an am aP CONTRAST A window asking for the current password appears Input the password using the virtual keyboard on the screen Current password M2 4j s6 7lle 9 o lt a Iw iLe Ir Ilt ily ILu ILi ILo i p a salf gln j Jl jenter z Xx cv bon mishift Space Exit Use the Next color Zoom in Zoom out and Contrast Decrease buttons to navigate to the character you want to type and press the Contrast Increase button to input the character Input the current password and press the Contrast Increase button on the Enter key of the virtual keyboard X Note If you want to exit the Wi Fi Password Dialog please press the Previous color button Page 41 6 gt PAN AN i X l I N Z TEN A fih S Y Ls o MTL LE 7 MODE LF CONTRAST A window asking for the new password appears Input the 8 digit password in the manner described above A window asking you to reconfirm the password to change appears Input the new password again When you have finished the abo
20. nnect E bot to a PC which does not support USB 3 0 the enlarged image resolution is automatically adjusted to accommodate the difference in connection speed X Note For instructions on controlling E bot using a keyboard and mouse please refer to section 11 of this manual 2 Connecting to a PC via Wi Fi E bot can output magnified images via Wi Fi connection to Windows PC s Android tablets and Apple iPads To output to your PC via Wi Fi turn on the E bot 2 Set the E bot Wi Fi switch to ON The Wi Fi indicator is changed to blue to indicate Wi Fi is on Page 25 Enter the PC s wireless network connection area and connect to the E bot network 4 When you are asked for the network key please enter the E bot s Wi Fi password The default password is 00000000 Once your PC is connected to the E bot network run the E bot viewer program on your PC and select Wi Fi as the connection method He C Q Wi Fi X Note In the E bot s options menu you can change the Wi Fi password X Note You cannot use the Internet via Wi Fi when you connect to E bot with PC via Wi Fi 4 4 Connecting to an Apple iPad or Android Tablet via WI FI Tablets running iOS 7 and higher and Android 4 3 and higher are supported 26 Page To view and operate E bot via your tablet please connect to the Apple App Store or Google Play Store and download and install the free E bot Viewer application 2 Wh
21. owered LCD sold separately Connect the portable monitor s USB power cable USB 2 0 to the DC OUT port on the back of E bot v Video amp Power X An example of potable monitor Page 17 Connect the portable monitor s HDMI cable to E bot s HDMI port to display E bot s output on the portable monitor 2 13 Channel DC IN X Note The DC OUT port is used only for connecting the portable monitor Please do not connect USB drives or other USB devices to the DC out port 4 3 Connecting to a PC or a Mac Recommended PC specifications are as follows e USB 3 0 support e CPU i5 e RAM 4GB e Graphics 1GB X Note Tablets running full Windows are also supported However you cannot use the E bot Viewer on tablets running Windows RT X Note PC s using USB 2 0 can display E bot s output however the display is a low resolution image X Note Macs running USB 2 0 are not supported To display E bot s output on your PC you first need to install the PC viewer program 4 3 1 Installing the PC Viewer Program Insert the installation CD into the PC The Installation program should run automatically If not run 18 Page the E bot_Package exe file The following window appears Please review the license agreement before installing E bot Viewer If you accept all terms of the agreement dick 1 Agree E bot PC Windows Viewer Software End User License Agreement EULA
22. owever USB charging is quite slow We recommend a minimum of 25 hours or more to charge 3 5 3 The Power Indicator The Power Indicator is located on the top right of the control panel of the main body The Power Indicator indicates status as follows Ne LT qy NO A MODE AV CONTRAST When the battery is being charged while E bot is turned on the Page des Power Indicator appears red When the battery is fully charged while E bot is turned on the Power Indicator color is changed to green When the battery is being charged while E bot is turned off the Power Indicator appears red When the battery is fully charged while E bot is turned off the Power Indicator is not lit 16 Page 4 How to Connect to Display Devices E bot is compatible with various types of display devices such as desktop video monitors laptop computers and Apple or Android tablets 4 1 Connecting a Monitor via HDMI Plug the monitor s power cord into a power outlet Connect the HDMI cable to the HDMI port on the monitor Connect the opposite end of the HDMI cable to the HDMI port on the rear of the E bot DC OUT Channel DC IN X Note If the monitor has no HDMI port but has a DVI port please use the included HDMI to DVI gender adapter X Note When connecting to an HDMI monitor the resolution of video output is 1280x720 regardless of the monitors resolution 4 2 Connecting a Portable monitor The On Lap Monitor is a portable USB p
23. s the next mode button 32 Page 6 4 Contrast Due to variations in paper type text type and color and the background color of documents or books that you are reading you may need to adjust the contrast to read the documents or books clearly 6 il Ne Y AN ut LY MODE NS CONTRAST You can adjust contrast by using the Contrast Increase Decrease buttons on the control panel on the main body The Contrast level can be adjusted from 1 to 40 The default level is 20 6 5 Finding your current Reading Position Use the Find location function to find the position of the magnified text you are currently reading in relation to the document placed on the reading plate or the presentation screen or whiteboard you are viewing from a distance Page 33 QIR E NE D ahs is K 7 MODE NO f CONTRAST Press and hold the Zoom in button and Zoom out together the magnification level is reduced back to normal and a red cross appears in the center of the display to assist your orientation so that you can locate the placement of the text in relation to the whole document Release both the Zoom in and Zoom out buttons and the magnification level returns to the rate you were using before pressing the Zoom buttons 6 6 Focus Lock By default E bot uses automatic focus However if you re writing under the camera or doing something else on which you don t want the camera to focus you can use the Focus lock to lock the
24. ve steps the new password is set You are returned to the view mode 8 4 Information Use this option to check general information about the E bot Bring up the Information window by pressing both the Next color and Contrast Decrease buttons on the top of the main body E D EX y Ip SS B A MODE JS CONTRAST 2 Here you can check the following information about E bot e Software version e Products serial number e Remaining battery Battery charge status and whether Battery is inserted If battery is not inserted it displays No battery 42 Page If battery is inserted and power is supplied it displays Charging xx If battery is inserted and power is not supplied it displays Charged xx e Wi Fi AP Itis displayed as E bot_xxxx xxxx is serial number of E bot To close the menu press any button on the top of the main body 9 Page 43 Upgrade 9 1 Upgrading from E bot to E bot ADV To upgrade to E bot ADV from E bot you must purchase the upgrade and obtain a certification number in order to authenticate the upgrade 9 2 Authenticating the Upgrade Make sure the main body and the purchased Wireless controller s channel setting values are the same 2 Press any button on the wireless controller and the certification number input window appears Input the certification number using the virtual keyboard on the screen Use the arrow keys to navigate to the ch
Download Pdf Manuals
Related Search