Self-Leveling Cross Line Laser
Contents
1. 20 Threaded Mount Battery Door 3 AA Batteries Product Overview EN 60825 1 1 4 20 Threaded Mount Magnetic Pivot Bracket Removable Universal Clamp Bracket Optional 5 8 11 Threaded Mount R 1 4 20 Thread 1 4 20 Threaded Mount Detector Optional Operation Modes and LED Indications Operation On Off Key Laser lines LED amp Beam Indication Switch on Short press H amp Von_ LED red constantly on when Short press Hon Voff pendulum locked Beam s Switch line Short press Hoff Von flash Short press H amp Von_ LED red and laser beam s Out of level flashes when out of level Switch off Ultra long press Power LED Green on indication LED Red on when low battery Full time switch on tool Activated pulse Long press Deactivated amp De pulse long press Re activated Note activate amp deactivate pulse mode by long press 28 lt T lt 2 5s and power LED blinks to indicate success in such mode switch Ultra long press T gt 3s User Guide Maintenance and Care Specifications e The laser tool is sealed and calibrated at the plant to the accuracies specified Leveling Acc lt 2mm 10m Laser Class 2 e It s recommended to carry out a accuracy check before its first use and H amp V Acc lt 2mm 10m Wavelength 635nm periodic checks during future use especially for precise layouts S2. Self Leveling Cross Line Laser nm 20 6 elf Levelling Thank you for purchase of our laser tool Please read these instructions thoroughly before operations Contents Safety Applications Product Overview Operation Modes and LED Indications User Guide Maintenance and Care Specifications Kit Content Warranty Safety WARNING e Read the Safety Instructions and User Manual thoroughly before using this product All users must fully understand and adhere to these instructions CAUTION e While the product is in operation be careful not to expose your eyes to the emitting laser beam red light source Exposure to a laser beam for an extended time may be hazardous to your eyes WARNING e The following label print samples are placed on the product to inform of the laser class for your convenience and Safety LASER RADIATION DO NOT cy STARE INTO THE BEAM OR VIEW XT DIRECTLY WITH e OPTICAL INSTRUMENTS o 2 CLASS 2 LASER PRODUCT EN 60825 1 Max Output lt 1 mW 630 670 nm e Do not stare directly into the beam or view directly with optical instruments or set up the laser at eye level Applications e Wall layout partitions ceilings leveling base wall units alignment of pipes conduit electrical sockets switches tiles carpentry and door window frame 2 Product Overview Magnetic Pivot Bracket Laser Output Window Pendulum Transport lock 1 4
3. anty does not cover faults caused by accidental damage wear and tear and use other than in accordance with the manufacturers instructions or repair or alteration of this product not authorized by us Repair or replacement under this Warranty does not affect the expiry date of the Warranty To the extent permitted by law we shall not be liable under this Warranty for indirect or consequential loss resulting from faults in this product This Warranty may not be varied without the authorization Calibration and care are not covered by warranty NOTE e The customer is responsible for the correct use and care of the tool Moreover the customer is completely responsible for periodically checking the accuracy of the laser and therefore for the calibration of the tool
4. elf Leveling Operating Time Up to 20h e When not in use please power OFF the tool and place the pendulum lock in Range its locked position Level Time Power Source 3 AA Cells e In Manual Mode self leveling is OFF The accuracy of the beam is not Working IP Rating IP54 guaranteed to be level Range 50m detector e Do not short any battery terminals or charge alkaline batteries or dispose of Operating i 10 C 50 C Storage Temp 20 70T batteries in fire Temp e Do not store the laser tool in direct sunlight or expose it to high temperatures The housing and some internal parts are made of plastics and may become Kit Content deformed at high temperatures Item Description Quantity amp Remarks Do not use aggressive cleaning agents or solvents Laser Tool with Magnetic Pivot Bracket 1 User Manual 1 AA Size Battery 3 Soft Pouch 1 Red Grid Laser Target 1 e Store the tool in its case when not in use If storing for extended time remove batteries before storage to prevent possible damage Quick Clamp Optional Universal Bracket Clamp Optional Detector Optional Warranty One Year Warranty We warrant our laser level s against faults in materials and or workmanship for one year from date of purchase Faulty products will be repaired or replaced at our option if sent together with proof of purchase to our authorized distributor s This Warr
Download Pdf Manuals
Related Search