VDT technical manual
Contents
1. greater than 48V 1 5A to Monitor fal__ 200000 Ole L1 L2 PL S1 S2 S Jumper removed Coop to Monitor Unlock Mode 1 ElectronMagnetic lock Safety Type Power off to open The lock consumption must not greater than 48V 1 5A Mounting Without Rain Cover e UO 160 165cm Mounting With Rain Cover _ A ae 160 165cm y Electronic Specifications Lock Power supply Power Consumtion Video signal NO COM exchange contact Unlocking time Working temperature 12Vdc 500mA supplied by system 1W in standby 12W in working 1V 750hm CCIR Max 48V dc 1 5 1 to9 seconds set by Monitor 5 C 45 C2. Door Camera VDT591 User Manual Parts and functions The 591 is a special design for the 2 wire system e Full matel cover with backlight nameplate 4 Door cameras connection Directly connect 2 separate electronic locks unlock time controlled by Monitor A ie Camera Lens a fe PON gt lo i Night View LED e Speaker 176mm e Nameplate i Call Button t Microphone 90 mm 23 mm Terminal Descriptions Lock Control Jumper Camera Code DIP e MIC adjustment SPK adjustment Main Connect Port Lock Control Jumper To configure the electronic lock safety type set the jumper in 1 2 position for Power to Unlock type pulse activated electronic lock set the jumper in 2 3 position for the Power Off to Unlock type electromagnetic lock Remove the jumper if using external power supply for the lock the power will be connected to the PL on the Main Connect Port Camera Code DIP To set the code for the door camera total 4 cameras can be connected in the system set to 00 for the master camera set to 10 for the slave 2nd camera set to 01 for the slave 3rd camera set to 11 for the slave 4th camera Set to 00 if there is only one door camera used in the system e Main C
3. e lock consumption must not greater than 12V 500mA to Monitor to Monitor Inner Power 2 Locks Connection Directly connect 2 electronic locks to the door station and use the Camera power to supply the locks There are 2 separate unlock icons on Monitor for opening each lock Note that the 2 locks should be the same safety type ee mm Jumper position in 1 2 Unlock Mode 0 Electronic lock Safety Type Power on to open L1 L2 PL S1 S2 S The lock consumption must not greater than 12V 500mA to Monitor External Power Connection 1 3 m E Jumper position in 2 3 fal__020000 gy Ol L1 L2 PL S1 S2 S to Monitor Unlock Mode 1 ElectronMagnetic lock Safety Type Power off to open The lock consumption must not greater than 12V 300mA lock 2 lock 1 Use external power supply to power the electronical locks in this way wide range lock from 5V to 48 V electronic locks can be used in the system Note that in this case the Lock Control Jumper is removed in both lock type Jumper removed Unlock Mode 0 fal 200000 aay Ol Electronic lock LL PESI SES Safety Type Power on to open Geoeode The lock consumption must not
4. onnect Port To connect the bus line and the electronic locks L4 L2 Connect to the bus line no polarity e PL External lock power input connect to the power positive power 1 S2 Lock power output to connect 2 electronic locks S Lock power output connect to the power input of electronic locks only when using the camera to power the locks if using the external power supply for the locks the S will not be connected Inner Power 1 Lock Connection The standard inner power lock connection use the Camera power to supply the lock no need for external power supply In this way the Lock Control Jumper and Unlock Mode in the monitor need to be set for Power to Unlock type electronic lock set to position 1 2 and Unlock Mode O in Monitor goto Main gt Setup gt Advanced Set gt Information page then press and hold the Unlock Button for 2 seconds to open the Unlock Mode setting page for Power Off to Unlock type electromagnetic lock set to position 2 3 and Unlock Mode 1 W 1 2 3 1 3 6 mE m Jumper position in 1 2 6 a E Jumper position in 2 3 f i Unlock Mode 0 JL Unlock Mode 1 fal__200000 g Of Electronic lock Safety Type Power on to open L1 L2 PL S1 S2 S The lock consumption must not greater than 12V 500mA ElectronMagnetic lock Safety Type Power off to open L1 L2 PL S1 S2 S Th
Download Pdf Manuals
Related Search