ZTE Unite Mobile Hotspot User Guide
Contents
1. Current Password New Password 420 characters Confirm New Password WAN Settings After logging in select WAN Settings gt Wireless Info to display the infomation of WAN wireless Click Refresh to update the information WAN Setti ngs Wireless Info Network Select WAN Connection WAN Wireless Information Network Provider U S Cellular Network Type 4G LTE Roam HOME RSSI 80 dBm Ec_Io 5 0 dBm Cell ID EVDO 00a8cOO063800000bd0b1 1397 4029baf LAC Code CDMA 7 Select WAN Settings gt Network Select to select the proper network mode including 4G LTE CDMA Mode and CDMA only Mode Click Apply to comfirm your choice WAN Setti ngs Wireless Info Network Select WAN Connection Network Selection Mode O 4G LTE CDMA Mode O CDMA only Mode Select WAN Settings gt WAN Connection to choose the WAN Connection mode according to your requirement 10 WAN Settings BAR OCS RCo Camm ceo usd WAN Connection O Auto Connect Manual Connect disconnect_intemet y WAN Connection Status Connected Data Roaming Data Roaming Enable Disable e Auto Connect The ZTE Unite will connect to the Internet automatically when it is powered on e Manual Connect Connect disconnect to the Internet connection manually e Data Roaming Enable or disable the WAN connection when your ZTE Unite is roaming Router After logging in select Router gt LAN to access the interface below Router LAN DMZ LAN Interface Setup IP Addr2. Navigating the Device Slide the Power Switch to the ON position to turn on the ZTE Unite The screen lights up After the initialization of the ZTE Unite the SSID and default password will display on the screen Press the OK button the following icons will appear cdf NOTE Devices and software are constantly evolving the screen images and icons displayed are for reference only and may differ from your device WAN Info Select M and press the OK button to check the WAN information Use the UP and DOWN buttons to scroll to the desired menu Press the OK button to view information about the following WAN settings Network Provider Displays the name of your service provider Network type Displays your network type Roam Displays whether or not your ZTE Unite is roaming WAN Connection Check your connection status WLAN Info Select e using the UP and DOWN buttons and press the OK button to check the following information Use the UP and DOWN buttons to scroll to the desired menu Press the OK button to view information settings O SSID Information Displays the SSID and password Connected Device Displays the information about connected Wi Fi devices Start WPS Launch the Wi Fi Protection Setup Read the prompt on the display and refer to the Usage Of Wi Fi Protected Setup WPS chapter Settings Select using the UP and DOWN buttons and press the OK button to check the following information Use the UP an
3. Card 1 Turn the power off Remove the battery cover and take out the battery 2 Gently remove the SIM card from the SIM card slot Connecting to the Internet With your ZTE Unite a wireless Internet connection can always be at your fingertips Connecting Wi Fi Enabled Devices To Your ZTE Unite NOTE It is recommended the battery be fully charged in order to use your ZTE Unite via Wi Fi for the first time or connect the device to the wall adapter for power The following should occur once you power on your ZTE Unite e Your ZTE Unite is powered on as soon as you slide the Power Switch to On and the display lights up e Once your ZTE Unite is powered on and has been activated it automatically connects to the Internet provided that Mobile Broadband service is available and one or more Wi Fi devices are connected e The Service 4G LTE 3G and 1X Signal Strength mM and Data Connected JA icons on your ZTE Unite indicate it is in service and ready to connect Follow these Steps 1 Use your normal Wi Fi application on your computer to establish a connection to your ZTE Unite 2 Look for the network SSID named USCC EuFi891 XXXX XXXX varies from device to device 3 Click Connect and enter the default password printed beside the battery compartment of your ZTE Unite NOTE Your password will also be displayed on the ZTE Unite screen each time the ZTE Unite is powered on Accessing the Internet After successfully establishi
4. WAN Settings siria isaac ia 10 ROULET A comaewagenseadcaneaneceweasnas oueneeteeonsees 11 WIFE SENINE S diosa accipied 11 Firewall a a a 14 TEXEL MESSE an Na 16 Advanced ssns TS 16 Navigating the Device ini 18 WAN INTO iia 18 WEAN MANO sansene S a a a a acahouee aa 18 Seneca AAA 18 TOK IVICSSAL Oi dd 19 Usage Of Wi Fi Protected Setup WPS cisicsisccscccesccccvsenccdccsenecacessncedeveenedccvcencsacvsencdadesenceacevens 20 CIOSS UV da 21 Health a a Safety INTO MATO vivir AAA AAN 22 General Guidelines ina a wtecautiyecsneane 22 o A O a 23 Hospital Safety iii ia 23 Road Sendai 23 Device Hed Sha saeco ea ces wa aves ec cs wes ceed weeks a 23 Faulty and Damaged ProGUcts iii ns 23 EXDIOSIVE GNVITONMENKS zerrena Ea Eai 23 Petrol stations and explosive atmosphere Srn E A E A NEO ARNE 23 Blasting Caps and Area eoan E E A AA aos 24 Vehicles Equipped with an Airbag ri 24 Tard Party EQUIDMENE aos 24 Efficient Ususario 24 Radio Frequency RF Exposure sesosssssossososssosossososssossosssosossososssosossosssososossesesssosoesosossesesesse 24 FCC COM AN CO NN A NRO 24 SIM Card Limited Warranty sient iaveveovecscatcdsscicdedsccesussdvseaduetessadssessucded seaseddduvesernseadetacsssestastess 26 Consumer Limited Warrants 27 Thank You For Choosing ZTE Unite The ZTE Unite is a newly developed 4G LTE Mobile Hotspot providing flexible LTE EVDO CDMA 1X access for users to enjoy high speed Internet applications When connected to the 4G L
5. receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help 23 SIM Card Limited Warranty Subject to the exclusions contained below United States Cellular Corporation U S Cellular warrants to the original purchaser You or Your of the handset with which the SIM card was provided that the SIM card will be free from defects in material and workmanship for a period of one 1 year from the date You purchased the handset the Warranty Period This warranty is not transferable Should a defect appear during the Warranty Period U S Cellular will send a replacement SIM card to Your address within the United States without charge provided that you request the replacement SIM card during or within thirty 30 days following the Warranty Period by calling U S Cellular Customer Service at 1 888 944 9400 or dialing 611 on Your U S Cellular handset or by visiting a U S Cellular retail store REPLACEMENT OF THE SIM CARD AS PROVIDED HEREIN IS YOUR EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF TITLE FITNESS FOR A PARTICULAR PURPOSE MERCHANTABILITY NON INFRINGEMENT OR ARISING FROM COURSE OF DEALING OR USAGE OF TRADE NEITHER U S CELLULAR NOR ANY OF ITS AFFILIATES OR RETAILERS SHALL BE LIABLE TO YOU
6. uses the 802 11 standard developed and released in 1997 by the IEEE Wi Fi Client A wireless device that connects to the Internet via Wi Fi WPA WPA2 Wi Fi Protected Access A security protocol for wireless 802 11 networks from the Wi Fi Alliance 21 Health and Safety Information General Guidelines Some electronic devices may be susceptible to electromagnetic interference Locate the device away from TV set radio and other electronic equipment to avoid electromagnetic interference The device may interfere with medical devices like hearing aids and pacemakers Consult a physician or the manufacturer of the medical device before using the device Please keep yourself at least 20 centimeters away from the device Do not use your device in dangerous environments such as oil terminals or chemical factories where there are explosive gases or explosive products being processed Please use original accessories or accessories that are authorized by ZTE Unauthorized accessories may affect the device performance damage the device or cause danger to you Do not attempt to dismantle the device There are no user serviceable parts Do not allow the device or accessories to come into contact with liquid or moisture at any time Do not immerse the device in any liquid Do not place objects on top of the device This may lead to overheating of the device The device must be used in ventilated environment Do not expose the device to direc
7. Enable and input the detailed information in the Virtual Server Settings area 2 Click Apply to save your settings In the Current Virtual Servers in system area click Delete to delete the virtual servers that you selected Select Firewall gt VPN to enable disable the VPN Connection Firewall IP Port Filtering Port Forwarding VPN VPN Connetion IPSec VPN Pass Through C Enable Disable Apply 15 Text Message After logging in select Text Messages to view or delete your messages stored in the Inbox Text Messages Inbox Settings Inbox No Number Date Contents 1065902002230 20210 0726 12 15460356 test ZTE Select Text Messages gt Settings to enable or disable your ZTE Unite to receive text messages during it powers on Text Messages Inbox Settings Receive Text Messages during device power up Receive Text Messages during device power up Enable Disable Note By disabling the Text Message feature you will not receive any incoming messages when the device powers up in a 4G LTE network You will still receive Text Messages in 3G networks To receive messages when the device powers on please enable the Text Messages feature NOTE Enable this feature to receive messages in 4G LTE network when the ZTE Unite is powered on Advanced After logging in select Advanced gt Status to display the system information Advanced Status Statistics Restore amp Reboot Sound Alert Activate Status Network Selection M
8. FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL ECONOMIC EXEMPLARY PUNITIVE OR CONSEQUENTIAL DAMAGES INCLUDING WITHOUT LIMITATION LOSS OF DATA LOSS OF REVENUE OR PROFITS DAMAGE TO PROPERTY OR LOSS OF USE IN NO EVENT SHALL U S CELLULAR S ITS AFFILIATES OR RETAILERS LIABILITY TO YOU OR ANY THIRD PARTY WITH RESPECT TO THE SIM CARD EXCEED THE COST OF REPLACING THE SIM CARD THIS LIMITED WARRANTY SHALL BE CONSTRUED UNDER THE LAWS OF THE STATE OF ILLINOIS EXCLUDING ITS CONFLICTS OF LAW PROVISIONS SOME STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE DISCLAIMER OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS AND DISCLAIMERS MAY NOT APPLY TO YOU No agent employee dealer retailer representative or reseller is authorized to modify or extend the terms of this Limited Warranty 26 Consumer Limited Warranty Personal Communications Devices LLC the Company warrants to the original retail purchaser of this cellular handset or wireless device Product that should this Product or any part thereof during normal consumer usage and conditions be proven defective in material or workmanship that results in the Product s failure within the first twelve 12 month period from the date of purchase proof of purchase required such defect s will be repaired or replaced with new or rebuilt parts at the Company s option without charge for parts or labor directl
9. TE Network the ZTE Unite can support simultaneous connections with up to 10 Wi Fi enabled devices When connected in 1X or 3G mode the ZTE Unite can support simultaneous connections with 5 Wi Fi enabled devices This guide will help you understand your new Mobile Hotspot and all the things you can do with it at home or abroad So let s get started Getting Started The following figure shows the appearance of your ZTE Unite it is only for your reference The actual device may be different US Cellular BUTTONS AND INTERFACE DESCRIPTION 1 SCREEN Displays the menus and the status of your ZTE Unite 2 UP BUTTON Scroll up to select the options 3 DOWN BUTTON Scroll down to select the options 4 OK BUTTON e Confirm the highlighted selection e When the ZTE Unite button is locked press once to light up the screen and press again to unlock 5 POWER SWITCH Power on off your ZTE Unite 6 MICRO USB PORT Charge your ZTE Unite 7 RESET BUTTON Press and hold to restore your ZTE Unite to the factory default settings Screen Indicators eon Description tom Description X No SIM No SIM Card Inserted Pe IN enabled SIM card or Incorrect SIM card inserted a Number of current X hi No N k l Hardware Installation Installing the 4G LTE SIM Card If you have not already done so please follow these instructions for the installation of your new SIM card which is in the package 1 Remove the SIM card fro
10. Unite Software Update Select Check for Update to check for new software e Button Lock Set the lock duration for your device by selecting on of the following options 30Secs 15Secs Never e Sound Alert Mute or unmute the system alert Text Message Select using the UP and DOWN buttons and press the OK button to check messages Select one of the following options New Messages Displays your unread messages Inbox Displays already read messages in your inbox 19 Usage Of Wi Fi Protected Setup WPS If your client device supports WPS you need not input the password manually after WPS has been available Please do the following 1 Start up your ZTE Unite 2 Launch the client device 3 Select the icon Ee and then choose Start WPS to enable the WPS function of your ZTE Unite 4 Enable the WPS function of the client NOTE For the detailed operations about the client please refer to the client s instruction 20 Glossary 3G Third Generation 3G refers to the third generation of mobile telephony 4G Fourth Generation 4G refers to the third generation of mobile telephony 802 11 b g n A set of WLAN communication standards in the 2 4 3 6 and 5 GHz frequency bands Broadband High capacity high speed transmission channel with a wider bandwidth than conventional modem lines Broadband channels can carry video voice and data simultaneously DHCP Dynamic Host Configuration Protocol Software found in server
11. WEP 40 Wire Equivalence Protection WEP Default Key Key 1 WEP Key 1 fi 234567890 Hex Password WEP Key 2 1234567890 Hex ASCII 5 characters Hex 10 characters WEP Key 3 f 234567890 Hex y WEP Key 4 fi 234567690 Hex The Wi Fi password should not contain personal and private information Because this password will be released to other Wi Fi users to establish W Fi connection And users can also get it from the device display while powering on or in SSID information menu e Authentication Type Two types of authentication can be used OPEN and SHARE In the OPEN authentication type the WLAN client device doesn t need to provide the correct credentials to the ZTE Unite in order to connect to it However if the credentials are incorrect data won t be transferred successfully between the WLAN clients and ZTE Unite In effect no authentication occurs And in the SHARE authentication type the WLAN client cannot connect to the ZTE Unite with the incorrect crendentials e Encrypt Type Select the encrypt tyoe WEP 40 and WEP 104 Password You can set at most four keys Choose one of them as the default key which is the only key in use at any given time You must enter the default keys on the Wi Fi client in order to connect to the ZTE Unite Select Wi Fi Settings gt ACL to access 13 Firmware Connected Security Wi Fi Settings Devices ACL Setting ACL Accept Deny MAC Address COOX e
12. ZTE Unite Mobile Hotspot User Guide LEGAL INFORMATION Copyright 2012 ZTE CORPORATION All rights reserved No part of this publication may be excerpted reproduced translated or utilized in any form or by any means electronic or mechanical including photocopying and microfilm without the prior written permission of ZTE Corporation The guide is published by ZTE Corporation We reserve the right to make modifications on print errors or update specifications without prior notice ZTE Unite is a trademark of the ZTE Corporation U S Cellular and the U S Cellular logo are the trademarks of the United States Cellular Corporation Version No 1 0 Edition Time 07 23 2011 Contents Thank YOU FOr Choosing ZTE UNINC iaa aaa TAS E T as 4 Getting Started iii AA AA AA AAA A di 5 o o A a a a a a a a aasa aa se asat 5 Hardware INStallatiOns siccecscwacsesscecnrscnctanccsscetcseesceanasactancsnceradeasarenttesstendicnceaeetuaraneesnecandsenavsmneesentunte 6 Instale the 4Gr LTE SIME Sanar ia 6 Inserting and Charging the Battery a 6 REMOVING THe AOLE SIM Ca dise dada 7 CONNECTING to the INC tactic AEE AEE A iaa 8 Connecting Wi Fi Enabled Devices To Your ZTE Unite sessesessssessssessssecssoessssesseosssecssseosssesesseoseee 8 PAGCESSING the Internet 8 Advanced Configuratio ad 9 Basie SGUUI sersesccrecsnsccsacnsoesreradecctexstacatanssassawacisusenoeacavanaaeueesnaaaurenncaacesoaeawacenauasveracisasecstecavesansaenaaess 9
13. ce at a refueling point such as a gas station even if you are not refueling your own car Do not store or carry flammable or explosive materials in the same compartment as the device Electronic systems in a vehicle such as anti lock brakes speed control and fuel injection systems are not normally affected by radio transmissions The manufacturer of such equipment may advise if it is adequately shielded from radio transmissions If you suspect vehicle problems caused by the radio transmitter in the device consult your dealer and do not switch on the device until your device has been checked by a qualified technician Device Heating Do not use the device in an enclosed environment or where heat dissipation is poor Prolonged work in such space may cause excessive heat and raise ambient temperature which may lead to automatic shutdown of the device for your safety In the case of such event cool the device in a well ventilated place before turning on for normal use Faulty and Damaged Products e Do not attempt to disassemble the device or its accessory e Only qualified personnel must service or repair the device or its accessory f your device or its accessory has been submerged in water punctured or subjected to a severe fall do not use it until you have taken it to be checked at an authorized service centre Explosive environments Petrol stations and explosive atmospheres e In locations with potentially explosive atmospheres
14. d DOWN buttons to scroll to the desired menu Press the OK button to view information settings e Device Info Displays the basic information about your device Phone Number SIM ID MEID SW Version PRI Version and RSSI e Data Connection Connect or disconnect the WAN connection e Data Roaming Enable or disable the WAN connection when your ZTE Unite is roaming eo Network Select Choose the desired network from the following options 4G LTE CDMA Mode and CDMA Only Mode eo Receive Text Messages Enable or disable your ZTE Unite to receive text messages in 4G LTE network during power on o Wi Fi Select Proceed to adjusting your Wi Fi settings or Back to return to the previous menu 18 The following Wi Fi settings appear when you select Proceed gt Wi Fi Network Mode Change the Wi Fi standard It is recommended that you do not change the defualt setting 11 b g n gt SSID Broadcast Enable or disable discovery mode allowing your device to be found by other Wi Fi compatible devices gt AP Isolation Enable or Disable the connection between connected Wi Fi devices communicating with each other gt Channel Choose the appropriate channel frequency to optimize the performance and coverage of your wireless network gt MAX Connections Choose the maximum number of Wi Fi devices that can be connected to your device simultaneously eo Web User Interface Indicates how to access the web based Configuration Page for your ZTE
15. dress Source Submask Protocol Range Type Delete 14 Default Policy Set how to handle the packet if any of the rules matches Source IP Address Set the source IP address that will be filtered Source Submask Set the source submask that will be filtered Protocol Set which protocol will be used for filtering Source Port Range Set the source port numbers that will be filtered Dest Port Range Set the destination port numbers that will be filtered How to add a new rule 1 Select Enable and click Apply in the Basic Settings area 2 Input the detail information in the IP Port Filter Settings area 3 Click Add in the IP Port Filtering Settings area In the Current IP Port filtering rules in system area click Delete to delete the rules that you selected Select Firewall gt Port Forwarding to access Firewall IP Port Filtering Port Forwarding VPN Virtual Server Settings Virtual Server Settings Disable If you select Enable the Virtual Server Settings will appear Virtual Server Settings Virtual Server Settings Enable y IP Address KKK XXX XK XXX eg 192 1681 101 80 Port Protocol TCP UDP y The maximum rule count is 10 Current Virtual Servers in system No IP Address Port Protocol Delete Delete IP Address Set IP address for the virtual server e Port Set port number for the virtual server e Protocol Set the protocol for the virtual server How to add a virtual server 1 Select
16. e battery if abnormal heat odor discoloration deformation or abnormal condition is detected during use charge or storage e Do not use your device with a damaged or deformed battery e Do not solder the battery directly e Remove the battery whose life cycle has expired from equipment immediately e Remember to recycle The cardboard packing supplied with this device is ideal for recycling Warning In the unlikely event of a battery leak take care to keep the leakage away from your eyes and skin If the leakage does come into contact with the eyes or skin flush thoroughly with clean water and consult with a doctor Aircraft Safety Switch off your device before the airplane takes off In order to protect airplane s communication system from interference it is never allowed to use the device when in flight Get aircrew s permission if you want to use the device prior to take off Hospital Safety e Switch off your device and remove its battery in areas where device use is prohibited e Follow the instructions given by any respective medical facility regarding the use of Wireless devices on their premises Road Safety e You must exercise proper control of your vehicle at all times Give your full attention to driving e Observe all of the recommendations contained in your local traffic safety documentation Please check if local laws and or regulations restrict the use of wireless devices while driving Switch off your devi
17. ess 9216811 Subnet Mask 255 255 2550 MAC Address 48 28 2f ce 11 5a DHCP Server Enable gt DHCP IP Pool f92 168 1 100 fi92 168 1 200 IP Address IP address for LAN interface Subnet Mask Subnet mask for the IP address MAC Address MAC address for the LAN interface DHCP Server Enable disable DHCP server function DHCP IP Pool Allocate start and end IP address for IP pool Select Router gt DMZ to access the interface below Router LAN DMZ DZ Setting DMZ means demilitarized zone IP Address Add DMZ means demilitarized zone click Add to add the Wi Fi client in DMZ and click Apply to confirm Click Delete to erase the Wi Fi client from DMZ An external computer or device can access to the Wi Fi client which is in DMZ rather than any other part of the network Wi Fi Settings After logging in select Wi Fi Settings gt Connected Devices to display the information about the devices connected to your ZTE Unite 11 Connected Devices Security Firmware Wi Fi Settings Wireless Network Station Address Type MAC Address IP Address Host Name Nickname 1 DHCP 00 fd 07 96 9a 11 192 166 1 100 IRONHIDERS SPT Apply If you want the user who has been disconnected to connect to this device again please operate according to notes in ACL tab The max length of nickname is 30 You can click Refresh to update the information or click Disconnect to terminate the wireless connection between these W
18. evice is on file with the FCC and can be found under the Display Grant section of http www fcc gov oet ea fccid after searching on FCC ID Q78 EUFI891 FCC Compliance This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Caution Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur ina particular installation If this equipment does cause harmful interference to radio or television reception 24 which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and
19. g a5 aG a7 a8 a9 aa If the ACL policy is Deny the user in MAC list cant connect to this device If the ACL policy is Accept the user in MAC list can connect to this device You can allow or refuse a Wi Fi user according to different ACL policy MAC List No MAC Address Policy Delete Delete lf the ACL Access Control List policy is Deny the user in MAC list can t connect to this device If the ACL policy is Accept the user in MAC list can connect to this device You can allow or refuse a Wi Fi user according to different ACL policy Select Wi Fi Settings gt Firmware to display the Wlan Chip Firmware Version Firmware Connected Security Wi Fi Setti ngs Devices Firmware Wlan Chip Firmware Version Chip er 12 10 Fweer2 1 1 10 Firewall After logging in select Firewall gt IP Port Filtering to access Firewall IP Port Filtering Port Forwarding Basic Settings IP Port Filtering Disable If you select Enable the filter settings will appear Bas c Settings IP Port Filtering Enable amp Delault Policy The packet that match with any Dropped rule would be IP Port Filter Settings Source 1P Address AXA XAXA XX JOCK ey 10 135 33 Source Submask Vie accept doo P sade At retar cetuled by toulce P Adest and bource bunari Protocol NONE The marrrarn rude court is Current IP Port filtering rules in system Source Port Dest Port Range Code Action Delete No Source IP Ad
20. g the fast boot program or the tampering with or short circuiting of the battery or j Product that has been modified to alter functionality or capability of the Product without the written permission of the Company The Company disclaims liability for removal or reinstallation of the Product for geographic coverage for inadequate signal reception by the antenna or for communications range or operation of the cellular system as a whole When sending your wireless device to the Company for repair or service please note that any personal data or software stored on the Product may be inadvertently erased or altered Therefore we strongly recommend you make a back up copy of all data and software contained on your Product before submitting it for repair or service This includes all contact lists downloads i e third party software applications ringtones games and graphics and any other data added to your Product In addition if your Product utilizes a SIM or Multimedia card please remove the card before submitting the Product and store for later use when your Product is returned The Company is not responsible for and does not guarantee restoration of any third party software personal information or memory data contained in stored on or integrated with any other wireless device whether under warranty or not returned to the Company for repair or service To obtain repairs or replacement within the terms of this Warranty the Product shou
21. h the sale of this product Some states or provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitation or exclusions may not apply to you This Warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province IN USA Personal Communications Devices LLC 555 Wireless Blvd Hauppauge NY 11788 800 229 1235 IN CANADA PCD Communications Canada Ltd 5535 Eglington Avenue West Suite 210 Toronto ON M9C 5K5 800 465 9672 28
22. i Fi enabled devices and your ZTE Unite Select Wi Fi Settings gt Basic to set the configuration of the wireless network gt Connected Wi Fi Settings Devis Security 4 Firmware Wireless Network Sleep Time 10 Minutes y Network Mode 11bgin y SSID USCC EuFi891 1154 00 1 30 characters Broadcast SSID Enable Disable AP Isolation Enable Disable Country Code US Frequency Channel Auto Select y MAX Connections 5 y eo Sleep Time Set the time before the ZTE Unite enters sleep mode The ZTE Unite will enter sleep mode if no Wi Fi clients devices are connected to the ZTE Unite for a given period of time e Network Mode If all of the wireless devices connect with the ZTE Unite in the same transmission mode performance will be improved by choosing the appropriate wireless mode e SSID Service Set Identifier SSID Enter a string less than 30 characters as the name for your wireless local area network WLAN e Broadcast SSID Disable or Enable Default this function If Enable is selected the ZTE Unite broadcasts the SSID and other devices can search and connect to it When you select Disable other devices can not search out the SSID If you want someone to connect you need to tell them the SSID and let them to setup manually AP Isolation When Enable is selected each of your wireless clients will not be able to communicate with each other e Country Code Choose the right country code e Fre
23. ld be delivered with proof of Warranty coverage e g dated bill of sale the consumer s return address daytime phone number and or fax number and complete description of the problem Transportation repaid to the Company at the address shown below or to the place of purchase for repair or replacement processing In addition for reference to an authorized Warranty station in your area you may telephone in the United States 800 229 1235 and in Canada 800 465 9672 in Ontario call 416 695 3060 THE EXTENT OF THE COMPANY S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND IN NO EVENT SHALL THE COMPANYS LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY ANY ACTION FOR BREACH OF ANY WARRANTY MUST BE BROUGHT 21 WITHIN A PERIOD OF 18 MONTHS FROM DATE OF ORIGINAL PURCHASE IN NO CASE SHALL THE COMPANY BE LIABLE FOR AN SPECIAL CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY EXPRESS OR IMPLIED WHATSOEVER THE COMPANY SHALL NOT BE LIABLE FOR THE DELAY IN RENDERING SERVICE UNDER THIS WARRANTY OR LOSS OF USE DURING THE TIME THE PRODUCT IS BEING REPAIRED OR REPLACED No person or representative is authorized to assume for the Company any liability other than expressed herein in connection wit
24. m the outer card being careful not to touch the gold contacts 2 Turn the power off Remove the battery cover and take the battery out Locate the SIM card slot Hold the card so the writing on the back of the card is facing you and the gold contact points are properly aligned with the SIM card slot 3 Insert the SIM card into the slot until it is fully inserted NOTES e The SIM card MUST remain in your ZTE Unite when in use Once the SIM card has been inserted into the ZTE Unite do not remove e Do not bend or scratch your SIM card Avoid exposing your SIM card to static electricity water or dirt e lf your SIM card is separated from the ZTE Unite or damaged your ZTE Unite will not work If you encounter any issue with your ZTE Unite contact Customer Service at 1 888 944 9400 or visit your nearest U S Cellular retail location Inserting and Charging the Battery 1 Use the thumb catch at the bottom of your ZTE Unite to open the battery cover and align the battery contacts with the terminals in the battery compartment as shown Push the battery down until it clicks into place 3 Your ZTE Unite comes with wall charger To charge Plug one end of the wall charger into an electrical outlet and the the other end into the ZTE Unite s MICRO USB PORT NOTE The charge time varies depending upon the battery level The device will stop charging if the temperature of the battery exceeds 113 F 45 C Removing the 4G LTE SIM
25. ment s requirements for exposure to radio waves This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency RF energy set by the Federal Communications Commission of the U S Government The exposure standard for wireless mobile devices employs a unit of measurement known as the Specific Absorption Rate or SAR The SAR limit set by the FCC is 1 6W kg Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands Although the SAR is determined at the highest certified power level the actual SAR level of the device while operating can be well below the maximum value This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network In general the closer you are to a wireless base station antenna the lower the power output The highest SAR value for the device as reported to the FCC is 1 344 W kg Body worn measurements differ among device models depending upon available enhancements and FCC requirements While there may be differences between the SAR levels of various devices and at various positions they all meet the government requirement The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines SAR information on this d
26. ng the connection between your ZTE Unite and Wi Fi clients you can access the Internet in the Auto Connect Manual Connect mode The default mode is Auto Connect Advanced Configuration 1 Make sure your computer is connected to the ZTE Unite 2 Launch the Internet Browser and enter http uscc hotspot or http 192 168 1 1 in the address bar NOTE It is recommended that you use IE 7 0 or later Firefox 3 0 or later Opera 10 0 or later Safari 4 0 or later or Chrome 10 0 or later 3 The login page appears as follow F US Cellular G Password FT Save Input the default password which is printed beside the battery compartment of your ZTE Unite and then click Login to access the Web User Interface NOTE Do not put anything on the top of your ZTE Unite Do not lay devices to overlap each other when using The ZTE Unite takes 1 2 minutes to initialize and attach to the network Basic Setup After logging in select Basic Setup gt Quick Setup to configure the Wi Fi settings including Wi Fi Network Name Wi Fi Securiy Policy and Sleep Time Basic Setup Quick Setup Password Wi Fi Network Name SSID USCC EuFi891 115A 1 30 characters Broadcast SSID Enabled Wi Fi Security Policy Wi Fi Security Type NONE Sleep Time Sleep Time 10 Minutes Select Basic Setup gt Password to change the login password for the Web User Interface Basic Setup Quick Setup Password Set Administration Password
27. o fire explosion or other hazard Only use the battery for the system for which it is specified Only use the battery with a charging system that has been qualified with the system per this standard Use of an unqualified battery or charger may present a risk of fire explosion leakage or other hazard Do not short circuit a battery or allow metallic conductive objects to contact battery terminals Replace the battery only with another battery that has been qualified with the system per this standard IEEE Std 1725 200x Use of an unqualified battery may present a risk of fire explosion leakage or other hazard Promptly dispose of used batteries in accordance with local regulations Battery usage by children should be supervised Avoid dropping the device or battery If the device or battery is dropped especially on a hard surface and the user suspects damage take it to a service center for inspection Improper battery use may result in a fire explosion or other hazard Do not put a battery into a microwave oven dryer or high pressure container Do not connect the battery directly into an electric outlet or cigarette lighter charger Use only authorized chargers ZZ e Do not puncture the battery with a sharp object such as a needle When the battery is disposed be sure it is non conducting by applying vinyl tape to the and terminals Do not drop throw or subject the device to rough treatment Stop using th
28. obey all posted signs to turn off wireless mobile 23 phones such as your phone or other radio equipment eo Areas with potentially explosive atmospheres include fuelling areas below decks on boats fuel or chemical transfer or storage facilities areas where the air contains chemicals or particles such as grain dust or metal powders Blasting Caps and Areas Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off two way radios or electronic devices to avoid interfering with blasting operations Vehicles Equipped with an Airbag An airbag inflates with great force Do not place objects including either installed or portable wireless equipment in the area over the airbag or in the airbag deployment area If in vehicle wireless equipment is improperly installed and the airbag inflates serious injury could result Third Party Equipment The use of third party equipment cables or accessories not made or authorized by ZTE may invalidate the warranty of the device and also adversely affect the device s operation For example use only the ZTE charger supplied with the device Efficient Use For optimum performance with minimum power consumption do not cover the device with anything Covering the device may cause the device to operate at higher power levels than needed and may shorten the using time of the battery Radio Frequency RF Exposure This device meets the govern
29. ode CDMA only Mode IMEI 990000562557 296 Wireless Access Module Software Version USCC_EuFi6891 1 0 0B02 System Up Time 1 hour 3 mins 33 secs Select Advanced gt Statistics to check your WAN usage Click Refresh to update the usage and click My USCC to visit the U S Cellular website to check your monthly total data 16 Advanced Statistics Restore amp Reboot Sound Alert Activate WAN WAN Receive data rate O bits s WAN Transmit data rate O bits s WAN Total Data Received O KB WAN Total Data Transmitted 0 KB Attention WAN usage as counted by the device on the Statistics page is estimated and may not be accurate for billing purposes Monthly Total Data Visit U S Cellular Website My USCC Select Advanced gt Restore amp Reboot to restart your ZTE Unite or restore it to the factory default settings Advanced Statistics Restore amp Reboot Sound Alert Activate Restore amp Reboot Reboot device Reboot Restore to Factory Default Select Advanced gt Sound Alert to turn on off the sound alert Advanced Statistics Restore amp Reboot Sound Alert Activate Sound Alert Sound Alert C On Off Select Advanced gt Activate to choose how the SIM card is activated You can either activate it once ZTE Unite is powered on or activate manually by clicking the Activate button Advanced Statistics Restore amp Reboot Sound Alert Activate Activate ce auto C Activate manual Apply 17
30. quency Channel Choose the appropriate channel to optimize the performance and coverage of your wireless network MAX Connections Choose the maximum number of the Wi Fi enabled devices which are able to connect to the ZTE Unite simultaneously Click Apply to save your settings 12 Select Wi Fi Settings gt Security to set the Wi Fi security settings Wi Fi Settings Security AC Firmware Devices Security Policy Security Type WPA2 PSK WPA WPA Algorithms CTKIP AES GTK 3600 1800 86400 Password 58255729 8 63 characters The Wi Fi password should not contain personal and private information Because this password will be released to other Wi Fi users to establish Wi Fi connection And users can also get it from the device display while powering on or in SSID information menu The security modes are described below e NONE In this mode no password is required WEP The WLAN clients who have the same key with wireless gateway can pass the authentication and access the wireless network WPA PSK WPA Pre Shared Key Enter the Pre Shared key as a plain text ASCII pass phrase of at least 8 characters eo WPA2 PSK A securer version of WPA with implementation of the 802 111 standard WPA PSK WPA2 PSK Apply both the WPA PSK and WPA2 PSK scheme If the Security type is WEP the following configuration page will appear Security Policy Security Type WEP 7 Authentication Type OPEN Encrypt Type
31. s and routers that automatically assigns temporary IP addresses to clients logging into an IP network DHCP Server A server or service with a server that assigns IP addresses Firewall A hardware or software boundary that protects a network or single computer from unwanted outside traffic Firmware A computer program embedded in an electronic device Firmware usually contains operating code for the device Hotspot A Wi Fi 802 11 access point or the area covered by an access point Used for connecting to the Internet HTTP Hyper text Transfer Protocol An application level protocol for accessing the World Wide Web over the Internet IEEE Institute of Electrical and Electronics Engineers An international technical professional society that promotes standardization in technical disciplines LAN Local Area Network A type of network that lets a group of computers all in close proximity Such as inside an office building communicate with one another It does not use common carrier circuits though it can have gateways or bridges to other public or private networks MAC Address Media Access Control A number that uniquely identifies each network hardware device MAC addresses are 12 digit hexadecimal numbers This is also Known as the physical or hardware address Port A virtual data connection used by programs to exchange data It is the endpoint in a logical connection The port is specified by the port number Port Forwarding A proce
32. ss that allows remote devices to connect to a specific computer within a private LAN Port Number A 16 bit number used by the TCP and UDP protocols to direct traffic on a TCP IP host Certain port numbers are standard for common applications Protocol A standard that enables connection communication and data transfer between computing endpoints Router A device that directs traffic from one network to another SIM Subscriber Identification Module Found in GSM network technology the SIM is a card containing identification information for the subscriber and their account The SIM card can be moved to different devices SSID Service Set IDentifier The name assigned to a Wi Fi network TCP IP Transmission Control Protocol Internet Protocol The set of communications protocols used for the Internet and other similar networks USB Universal Serial Bus A connection type for computing device peripherals such as a printer mobile device etc VPN Virtual Private Network A way to communicate through a dedicated server securely to a corporate network over the Internet WAN Wide Area Network A public network that extends beyond architectural geographical or political boundaries unlike a LAN which is usually a private network located within a room building or other limited area WEP Wired Equivalent Privacy An IEEE standard security protocol for 802 11 networks Superseded by WPA and WPA2 Wi Fi Wireless Fidelity Any system that
33. t sunlight or store it in hot areas High temperature can shorten the life of electronic devices Do not allow children to play with the device or charger Use an antistatic cloth to clean the device Do not use chemical or abrasive cleanser as these could damage the plastic case Turn off your device before you clean it Use the device within the temperature range of 10 C 35 C and the storage temperature range is 20 C 60 C The humidity range is 5 90 Do not use your device during a thunderstorm Remove the charger from the mains socket Do not take out your SIM card unnecessarily The SIM card may be easily lost or it can be damaged by static electricity Do not place the device alongside computer disks credit cards travel cards or other magnetic media The information contained on the disks or cards may be affected by the device Do not paint the device Do not remove the device battery while the device is switched on Take care not to allow metal objects such as coins or key rings to contact or short circuit the battery terminals Do not dispose of batteries in fire The device s Li ION batteries may be safely disposed of at a Li ION recycling point Follow local requirements for recycling Do not put the device s battery in your mouth as battery electrolytes are toxic Do not modify or remanufacture attempt to insert foreign objects into the battery immerse or expose to water or other liquids expose t
34. y related to the defect s The antenna keypad display rechargeable battery and battery charger if included with the Product are similarly warranted for twelve 12 months from the date of purchase This Warranty extends only to consumers who purchase the product in the United States or Canada and it is not transferable or assignable This Warranty does not apply to a Product subjected to abnormal use or conditions accident mishandling neglect unauthorized alteration misuse improper installation or repair or improper storage b Product whose mechanical serial number or electronic serial number has been removed altered or defaced c Damage from exposure to moisture humidity excessive temperatures or extreme environmental conditions d Damage resulting from connection to or use of any accessory or other product not approved or authorized by the Company e Defects in appearance cosmetic decorative or structural items such as framing and non operative parts f Product damaged from external causes such as fire flooding dirt sand weather conditions battery leakage blown fuse theft or improper usage of any electrical source g Product subjected to unauthorized modifications to the software of the Product or to the Product itself h Product subjected to the unauthorized opening or repair of the Product i Product subjected to hacking password mining jail breaking the unlocking of the boot loader usin
Download Pdf Manuals
Related Search