- Energy Sistem
Contents
1. Pull the battery loader out and insert a CR2025 battery ju Make sure to place the battery in the correct direction When not using the remote control for a long period of time remove the battery When operating range reduces replace the battery Do not recharge disassemble or heat the battery Misuse of the battery may result in leakage that will damage the remote control To use the remote control point it towards to the IR receiver The remote control range is 4 metres or less within a 30 angle from the remote sensor If the remote s battery is low the remote may not function properly so replacing the battery immediately is recommended The remote control will not work if the way to the receiver is blocked sunlight or other very strong light will decrease the sensitivity of the remote control This portable TV comes with a built in rechargeable Lithium lon battery Charge the battery fully before initial use for at least 8 hours Charging time is normally about 4hours A fully charged battery delivers about 2 5 hours of use When the battery is weak an indication symbol will appear on the screen and the unit will power off automatically after a few minutes Caution Make sure to check the voltage specification of the wall outlet is the same rating with the receiver To prevent the risk of electric shock do not open the cover or the back of the TV 6 1 Antenna The TV unit is supplied with a telesco2. You can open the main menu by pressing Menu Exit You can press AV to select mode which you want to enter In Main Menu press to choose Digital TV option and then Press ENTER once to enter Digital TV menu as shown in Under the Digital TV menu there are six different options System offers an efficient function of channel management There are two independent pages for channel management TV and RADIO Under the channel manager menu press ENTER to enter channel orga nizer menu Channel organizer page includes favourite channels moving and channel deleting Note It will pop up and dialogue box prompting that Channel not available when there are no channels in database and it will not enter into channel organizer page Press select channel Press lt d to choose the line where Favourite Chan nel move and delete and press ENTER to set and cancel Favourite Channel move or delete After setting corresponding figure will appear Note After moving a channel press yellow button to free the selection Under the channel sorting the channels shall be listed according to certain sequence so that the user can easily find them Note It will pop up and dialogue box prompting that Channel not availa ble when there are no programs in database and it will not enter into channel sorting page Press AV tochoose Type Press 4 to set Sorting Parameters Before sorting the type of sort
3. you can automatically update the software of the device Use lt d gt to select YES or NO Select YES to come back to the factory default settings Here you can find system software information including H W Version S W Version F W version Checksum Build Date and Build Time Press Menu Exit to return to previous menu When playing a Digital TV channel you press OK from the front panel to open the Digital TV basic function menu FAV Program If there are some favourite pro grams that have been set up press to enter into the favourite program list Press AV to select the favourite program and use ENTER to confirm the choice or else press Menu Exit to exit TV Radio Press TV RADIO to switch between TV player and RADIO player when the program is in full screen EPG Electronic programs guide GATINEAU 4 Note The program signal must contain EPG date In other case it may be not available Enter into the EPG page to know more about the programs to be played Subtitle Note The program signal must contain Subtitle date In other case it may be not available Subtitle is defaulted to be off To see the subtitle information enter the Subtitle menu of the current programs Use 4 to choose whether to open subtitle or not and press to move upward and downward to choose language Note The program signal must contain TTX date In other case it may be not av
4. terrestrial digital transmissions in your area The file is damaged or the code is wrong Change the file The format of the video is not compatible or file is damaged The resolution of the files not suitable Change the file 10 SPECIFICATIONS tem Specificactions muton RF Input Level 20 78 dBm Tuner IF Bandwidth 7 MHz amp 8 MHz Modulation QPSK IGQAM 64QAM Decoder Format MPEG2 Video Output Format 4 3 amp 16 9 MPEG I layer amp 2 Decoder Format WMA USB 2 0 connector OPE Ino DivX Xvid AVI MPG audio MP3 WMA and photos RF in IEC 169 2 female connector 2 0 s lo Host max USB capacity 16 GB Card Reader ene max card capacity az ur eo DC 9V Type Digital LCD with LED backlight Resolution 1024 x 576 Dimensions wxdxt 286mm x 78mm x 39 5mm Specifications are subject to change without further notice AC 100 240V 50 60 Hz max 0 5A Input 63 Energy Sistem Soyntec S A warrants its products to be free from defects in materials and workmanship at the time of purchase The warranty period is 36 months from the date of purchase for your portable multimedia TV Visit the Support section at http support energysistem com and select your product to view the FAQ Frequently Asked Questions The solution to your problem is very likely to have been already published there You will also be able to download user manuals user guides dr
5. ENERGY SISTEM User manual Thank you for purchasing this Portable Multimedia Energy LED TV3010 First of all welcome to the Energy portable multimedia TVs world The following sections provide an overview of your new device and its basics features Please read everything carefully before start using the product A Caution A RISK OF ELECTRIC SHOCK DO NOT OPEN To ensure your safety and the safety of others please ensure that you read all the safety information before operating this product Keep this information in a safe place for future reference This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts WARNING To reduce the risk of fire or electric shock do not expose your TV30IO to rain or moisture Safety Considerations Do not use the device in humid or damp conditions Do not allow the device to get wet Do not expose the device to dripping or splashing Do not place water filled objects on top of the device Do not place naked flame sources such as candles on the top of the device Ventilation The slots and openings on the device are for ventilation Do not cover or block them as it may cause overheating NEVER let children push anything into the holes or slots on the case Battery Disposal Please ensure batteries are disposed of safely Never dispose of batteries a fire or with other household waste Check with your
6. ailable If you want to watch teletext please select TTX to enter into TTX page Use the following keys A goto the previous page go to the next page go back 100 pages P advance 100 pages TTX or Menu Exit exit Press lt d to switch between Stereo Left left channel Right right channel Then use A V to switch the language of sound anthony hayveood Program info Show the information of current program when it is in normal playing state You can also press INFO to access to Program info 1 2 2 Movie Press ENTER key to enter to next directory Press Menu Exit to return to previous directory It displays only video files and folders Use tochoose the video file and press ENTER to play selected file While playing a video press ENTER to pause or play Press 4 lt to play previous video press P P to play next video 98 Press gt gt or 4 44 to modify the playback speed Press Menu Exit to exit play mode and return to file directory Press AV to choose Music option Press ENTER to confirm and enter into the main directory Press ENTER key to enter to next directory Press Menu Exit to return to previous directory It displays only audio files and folders Use A V tochoose audio files and press ENTER to play selected music file Press lt to play previous audio file press B P to play next audio file While p
7. e different themes are available 2 Time on OSD sets whether to display system time in full screen play channel not Press lt 4 to choose between ON and OFF 3 OSD Timeout sets some information hint dialogue box and displays time length Press lt 4 gt to choose among 6 seconds OSD Trans sets menu transparency Press 44 to adjust value between 0 60 OSD Language The system has the user interface supporting a couple of languages you can set language via OSD Language option Press 44 to enter OSD Language List 6 Ist audio and 2nd audio Language option Press lt d to enter the currently supported Audio Language list then press A V to choose language and finally press ENTER to confirm TV Through TV setup you can adjust image configuratuon All TV setup options are listed on the left of the menu The values corresponding to this option can be displayed on the right of the menu Move the cursor to the desired TV option and press lt 4 to choose among available options the set takes effect immediately The different options in TV menu are Aspect Ratio 4 3PS 4 3LB I6 9 Brightness 0 100 Contrast 0 100 HUE 6 5 4 3 2 1 0 1 2 3 4 5 6 Saturation 0 12 gt no System setup Press Vto select the System Setup option you want to change Press 44 to enter into the list on the right and then use again to select the desired
8. ing shall be set including the following items First Option Choose the programs to be sorted via the selection area such as England Italy France etc 2 Second Option Press FTA free of charge Scramble encrypted ALL Free and Encrypted Channels 3 Third Option According to alphabetic order All 7 Z A LCN LCN After sorting is set to realize chan nel sorting press ENTER Then the system will ask you if you really want to save the channel sorting T E e 2 Edit Channels Has different operations such as Add and Rename channels Note It will pop up a dialogue box prompting No Carriers when there are no programs in database and it will not enter into ADD Edit Channel page 4 Add Channel menu Under Add Channel menu there are 6 parameters for adding a channel as follows Area Name For Area Name press gt in the remote controller to enter the Area Name list on the right then press AV to choose area name press ENTER to confirm Carrier Press 44 gt to choose Channel Name Press to enter Rename Channel page Audio PID Video PID PCR PID Press 0 9 number key to revise values Press ENTER to confirm the adding the system will hint with Update succeeds and return to Edit Channel menu If you do not like one or some channels you can delete it them in Channel Organizer menu But if you do not like all TV or Radio you can enter Delete All me
9. ivers and updates If you cannot find an appropriate solution in the Support section you may send us your enquiry or warranty service request by email support energysistem co uk Alternatively you may prefer to contact the distributor from which you purchased the product presenting the purchase receipt or invoice Specifications are subject to change without notice 2011 by Energy Sistem All rights reserved All company brand and product names are trademarks or registered trademarks of their respective companies Energy Sistem Soyntec 5 A Pol Ind Finestrat C Calpe no 1 03509 Finestrat Alicante 902 388 388 902 119 034 A53107488 We declare under our own exclusive responsibility that the product Energy Sistem Portable Multimedia TV Energy LED TV30IO White Is in compliance with the essential directives norms and standards of the European Union 89 336 EEC EMC Directive China This symbol on the product or the instructions means that your electrical and electronic equipment should be disposed at the end of life separately from your household waste For more information please contact the local authority or dealer where you purchased the product
10. laying music press ENTER to pause or play Press gt gt or lt lt to modify the playback speed Press Menu Exit to exit music play mode and return to file directory Press A V to choose Photo option Press ENTER to confirm and enter into the main directory Press ENTER key to enter to next directory Press Menu Exit to return to previous directory It displays only photo files and folders Use AV to choose photo files and press ENTER to open selected photo file Press 4 lt to play previous photo press gt to play next photo Press Menu Exit to exit play mode and return to file directory Press AV to choose Disk Mana ger option Press ENTER to confirm Press Menu Exit to exit from Disk Manager In TV or Radio playing mode press PVR to open REC selection window and select YES to begin recording While recording press PVR to open REC selection window again and select YES to exit Note REC files can only be saved in the memory of an external USB device In desktop of Disk Manager press V to select a file in the list of files Press ENTER to play the selected file In desktop of Disk Manager press the green button of the remote control to switch between operations of PLAY Delete One Delete all After pressing ENTER to select one operation a new dialog box appears Select YES to confirm or NO to cancel The programs recorded from TV can be played in Movie function Y
11. ll exit the scanning page and save the program Then it will return to the installation menu and play it in a small window Area search is a kind of intelligent and convenient mode of programs searching which covers programs of all frequency points of target countries or regions At present this system covers many targets countries and regions including Germany England Italy France Spain etc To enter into Area Search menu move the cursor to Area Search by using A V and then press ENTER After entering into area search page system will scan all programs one by one under frequency points of current countries or regions selected automatically During scanning press Menu Exit to stop and exit scanning If any pro gram is detected and the scanning process is finished system will exit the scanning page and save the program Then it will return to the installation menu and play it in a small window Configuration provides individuali zed system setup function you can configure the system according to your own hobby and demand You can set the user interface display mode according to your own demand When the cursor moves on the option in OSD menu the values corresponding to this option appear on the right of the menu Press to move upward and downward to choose the options OSD menu The different options in OSD menu are OSD sets system menu theme fiv
12. local authority for disposal regulations Cleaning ALWAYS unplug the product before you clean it Do not use liquid or aerosol cleaners Clean the device with a soft damp not wet cloth 3 CONTROLS AND CONNECTIONS 3 1 Front view ENERGY SISTEM N E i 22 10 LED Screen o 2 CH Move up in the menus and change to the next channel in viewing mode 3 CH Move down in the menus and change to the previous channel in viewing mode 4 VOL Move right change settings in menus Increase the volume level in viewing mode 5 VOL Move left change settings in menus Decrease the volume level in viewing mode 6 OK confirma selection 7 MENU Press to open the menus exit to go back to the topper menus 8 Mode Press this button to switch display mode 4 3LB 4 3PS 16 9 9 LED indicator 10 IR receiver The LED states are shown as Blue The battery has finished charging and is full Red Device on and battery charging Device off and battery charging Null Device on Device off Flashing The device is in STANDBY mode 39 3 2 Top view Stand 2 Antenna 3 3 Side view SD SDHC MMC Card Reader 2 USB jack m 3 ON OFF 4 9 DC 9V Jack 3 5 mm Earphone Jack 3 4 Rear view Hanging bracket to the wall 2 Remote control jack J Speakers ENERGY TV3010 10 Multimedia P
13. nu to delete all TV and Radio channels Under Channel Manager menu press A V to choose Delete All option and then press ENTER To delete all TV channels or all radio channels press AV to move the cursor to All TV Channels option or All Radio channels option press ENTER Then the system will ask you if you really want to delete all channels Under the installation menu there are two kinds of Installation modes Auto Search and Manual Search To enter into auto searching menu move the cursor to Auto Search by using A Y and then press ENTER After entering into auto search page system will scan all programs one by one under frequency points of current countries or regions selected automatically During scanning process press Menu Exit to stop and exit scanning If any program is detected and the scan ning process is finished system will exit the scanning page and save the program Then it will return to the installation menu and play it in a small window If you know the frequency of the program or if you want to scan the program at any frequency required you can select manual scanning To enter into manual searching menu move the cursor to Manual Search by using A Y and then press ENTER It will display the relevant parame ters Freq KHz and Band Width Then press ENTER to start sear ching If any program is detected and the scanning process is finished system wi
14. ortable LED TV 0 9 To change the channel and to select individual menu options ON STANDBY Press to turn on the device or to change to Standby mode MODE Press this button to switch display mode 4 3LB 4 3 5 16 9 PVR Record programs of TV or Radio MUTE Press once to turn the sound off on mute control FAV To operate the favourite channels EPG Press this button to display Electronic Program Guide SUB Subtitle INFO GOTO Press to display the information of the current programs or to go toa specific instant of the video playback TTX Press to enter Teletext if available L R Press to change the sound of channel TV Radio TV Radio switch Menu Exit Press to open the menus and press again to exit B Play next file chapter lt 4 44 Play previous file chapter gt P Fast forward the video playing 44 44 Fast rewind the video playing PLAY PAUSE Starts or pauses the current playback Move up in the menus and change to the next channel in viewing mode Move down in the menus and change to the previous channel in viewing mode P Move right change settings in menus Increase the volume level in viewing mode Move left change settings in menus Decrease the volume level in viewing mode ENTER To confirm a selection Or to open the channel list Menu Note SUB TTX EPG may not be available for all channels 4 P will act as RED GREEN YELLOW BLUE key depending on context
15. ou will find the file in PVR folder which contains all the recordings done The programs recorded from Radio can be played in Music function If you experience problems with this receiver or its installation in the first instance please read carefully the relevant sections of this User Manual and this Troubleshooting section The LED does not Check that the mains cable is when the device is mains needs to be recharged properly and charged Battery exhausted Charge battery The remote control is not working e control is incorrectly aimed Aim the remote control to the TV that nothing blocks the front panel The program signals no subtitle Try pressing the SUB button to open iP date the subtitle d display the subtitle The subtitle doesn t open or decus signal is too weak Make sure the signal is good When the device tries to find and store channels you get the message No signal OR When only very few of the expected number of channels are found Can t play the music file correctly OR Can t play the video Picture or video can not be seen in full screen The aerial is not properly Check the aerial installation connected to the machine including its connections The aerial is not correctly direc Check that the aerial is directed ted towards the transmitter towards the transmitter The aerial is not suitable for Check that digital transmissions digital channels are available in your area There are no
16. ping antenna that will provide good reception in most situations Be sure to keep the TV stationary when trying to receive a signal Any movement of the TV can result in loss of the digital signal j i le p Please pull the Antenna just like the figure shows We recommend to use an external antenna instead of the portable antenna inclu ded when the signal isn t good enough 6 2 Connecting the earphones You can connect stereo earphones to the headphone jack for private listening When earphones are connected the speakers will automatically turn off Caution Loud volume can damage your hearing Decrease the volume before connecting earphones and then raise the volume back to a comfortable level 43 I A C 2 eal 6 3 Installing stand Insert the front end of the support to the slot on the back cover and then rotate the base as illustrated in bottom until the support is locked properly USER INTEFACE 7 1 Powering ON the system OFF ON Power On Switch ON OFF button from OFF to ON The system will enter DVB mode as soon as the system is powered on System interface when there are no TV RADIO programs in the database If the database has already got TV or RADIO programs saved the sys tem will continue with the program it was playing before it was powered off Press AV to switch to the previous or next program And press P to adjust the sound volume
17. value Finally press ENTER to confirm the umma Selection The different options in System Setup menu are Surround set stage effect OFF Concert Church Passive Live 2 LCN set the LCN on or off When you choose ON the front of the programs will display the LCN number 3 Area To set scanning area Choose an area to download preset channel settings Time Use it to enter time set In Time menu there are two time modes auto and manual When the cursor moves onto Timer Mode option press 44 gt to choose time mode a Auto setting revise via setting GMT Offset Summer Time options az L zj eo The system settings are Auto as deffault GMT Offset press to move the cursor into the Properties list on the right Press AV to move upward and downward the cursor and choose the relevant GMT Offset Finally press ENTER to confirm the choice 2 Summer Time move the cursor to Summer Time option and use gt to set Summer Time b Manual setting revise via setting Date Time options Date press lt gt to enter date setting menu Use 44 to switch days use AY switch weeks use lt lt lt switch months and use gt gt P switch years 2 Time Press 0 9 number key to revise values After time is set Press ENTER to save the setting the system will hint with Update succeeds If there is a software upgrade avai lable
Download Pdf Manuals
Related Search