OIL DRAINER WITH VACUUM
Contents
1. dipstick opening and close the suction hose faucet 2 Close the valve faucet that connects the measuring cylinder with the reservoir Close the valve for oil draining at the elbow pipe speed clutch valve in the upper part of the reservoir and the funnel valve 3 Connect the speed clutch in the upper part of the measuring cylinder to hose with compressed air and open the compressed air control valve The pressure gauge will show value in pressure decrease 4 When the vacuum reaches minus 0 5 bar open the valve on the suction hose The machine will vacuum the oil from the vehicle engine to the measuring cylinder via the suction hose C Catching the engine oil in the funnel Using jack or lifting equipment lift the vehicle Move the funnel under the oil pan plug and unscrew the plug 2 Open the valve faucet that connects the funnel with the reservoir and valve of the speed clutch on the upper part of the reservoir The oil will be transferred from the funnel to the reservoir Ss D Pumping the oil from the measuring cylinder to the reservoir Open the valve that connects the funnel with the reservoir The oil will be transferred from the measuring cylinder to the reservoir E Pumping the old oil out of the reservoir 1 Close all valves except the vacuum generator inlet valve on the measuring cylinder NOTE It is necessary to close the valve between the measuring cylinder and the reservoir Otherwise the pressure may damage the measur2. WARRANTY CARD 1 KH Trading machines and tools are covered by 6 24 months warranty starting on the date of purchase as described in the Civil Code proof of purchase or invoice receipt must be enclosed with the warranty card when making a claim 2 This warranty does not cover defects caused by unprofessional handling machine overloads not complying with instructions contained in this manual using accessories that are not approved unauthorized repair regular wear and tear and damages occurred during transport Further this warranty does not cover parts and accessories such as the motor carbon brushes seals and hot air operated parts and parts that need to be changed regularly 3 Ifthe repair is to be found as not covered by the warranty policy all costs including the repair and ship ping to and from the repair centre will be paid by the customer according to valid price list See www L D R A A Fa R 4 When making a claim you must present the warranty card showing the date of the purchase the serial number of the machine vendor stamp and signature of sales clerk as well as the proof of W T E VA G U U Ra purchase receipt 5 Warranty claim shall be made at the vendor shop where you bought your machine or you may mail it to a service centre The vendor is obligated to fill out the warranty card date of sale serial number vendor stamp and signature All these information must be filled in at the time of sale 6 The warra
3. achine Never remove or damage them If the warning label becomes unreadable please contact your vendor e Keep your working place clean e Never work in tight spaces or in purely lit rooms Make sure the floor is solid and stable and that you can move around easily e Maintain your tools clean and in safe working conditions e Handles must be kept free of grease and dirt e Make sure no children unauthorized persons or animals have access to your workshop e Never put your hands or legs inside the working area e Never leave your machine equipment unattended during operation e Use only for purposes for which it has been designed e Use personal protective gear such as safety goggles ear protection respirator safe working shoes etc e Do not overreach use both hands e Never work under the influence of alcohol or other drugs e Do not use the machine if you feel dizzy or week e Any modifications or improvements to the machine are strictly prohibited Do not use if you discover damage bent part crack or other condition that may prevent the machine from working properly e Never perform any maintenance during operation e If you see any unusual sign or hear any strange sound switch off machine immediately e Do not forget to remove all wrenches and screwdrivers from the machine after use e Before use make sure all screws are tightened securely e Perform maintenance regularly Before use make sure the machine is in good work
4. flow capacity of 1 8 per minute medium pipe with flow capacity of 0 6 per minute and small pipe with flow capacity of 0 4 per minute Oil may be sucked out if the suction hose is 2 3 cm below the oil level The hose cannot be touching the bottom or be bent upwards Oil may not be sucked out if the hose end is above the oil level After long operation it is necessary to inspect if the speed clutch is not loose O N oO O 7 Our findings Some vehicles e g Toyota Jiamei has the dipstick opening located in such place that you cannot push the suction hose in Even if you manage to slide the hose in you cannot take it out without damaging the hose When you want to pump oil out of a vehicle you never done before make sure that there are no obstacles that may prevent you from finishing your job To avoid the above described problem use the method of catching the oil from the oil pan to the funnel 8 Place a net like textile acoustic absorber on the cap of the pumping unit If there is an air in the compressor or if the operational personnel makes a mistake water or oil may splash out Make sure you solve this problem to avoid incidental injuries due to water or oil spills CAUTION During the pumping process constantly inspect the oil temperature If the oil temperature reaches above 21 C 70F use personal protective gear and comply with all safety instructions 1 user s manual 1 pc 2 warranty card 1 pc 3 brass pi
5. ing conditions and without any damage e Use only original spare parts during repairs e Using non original spare parts or other parts not approved by the manufacturer may cause damage to the machine or personal injury to the operating personnel e Use this machine only for work that could be handled by it Do not overload tools accessories or the machine For large work volume use more powerful machine e Do not overload Measure the work load in such way so it could be done with a comfortable speed e Do not expose to extremely high temperature or direct sunlight e This machine is not designed for use in humid environments or under water AN Assembly e Do not use the machine unless completely assembled Fire prevention instructions e K Do not leave the oil drainer near heat source e AN Do not perform any welding jobs on the reservoir YA NN o amp amp Do not smoke or work with an open fire during work BA e Functional drawing AEDA ie S Fs EA x i il 7 a 1 h h funnel pressure gauge vacuum generator faucet 1 4 plastic measuring cylinder faucet 1 suction hose 7 air Supply speed clutch oe at ee ee iP adjusting Knob faucet 1 2 O 11 h l oil reservoir If the machine breaks down send it back to the vendor for quick repair Please enclose brief description of the defect That makes repair easier If the machine is still covered by
6. ing cylinder 2 Place the elbow of the drainage hose in to the used oil collection tank Make sure the tank is closed properly to prevent oil leakage 3 Open the bottom draining valve 4 Connect the speed clutch in the upper part of the reservoir to the compressed air hose and open the compressed air supply valve NOTE If you wish to stop the pumping process immediately close the air supply valve and pull the ring of the safety valve The oil will be transferred out via the draining hose NOTE The air pressure must be increased slowly to 1 prevent air losses 2 speed up the pressure decrease 3 speed up the oil pumping transfer TROUBLESHOOTING A The pressure gauge does not show the decrease in the air pressure 1 Check if the supply inlet pressure is between 8 10 bar and the air volume is up to 200I min for pipes with diameter of 6 mm Make sure all applicable valves are closed properly Check the seal conditions between the measuring cylinder and the oil reservoir OO N Even though the pressure gauge shows the correct decrease in the air pressure the pumping sucking action does not work Check the conditions of the seal between the probe and the suction hose Make sure the oil temperature is not too low Check if the suction valve on the hose is open If so close it Make sure the suction hose is not blocked or that is not touching the bottom of the oil reservoir AOO N Regularly inspec
7. mment or question in timely matter Before first use please read this manual carefully It is your responsibility to study all instructions necessary for safe use and operation and to understand all risks that may be involved during the use of power machines WARNING Do not try to use this machine before reading this entire manual and before you know how to handle it Keep this manual for future reference Pay special attention to safety instructions Not complying with safety rules may cause injury to the operating person or to people standing by or it may cause damage to the machine or to the work piece Pay special attention to safety notes and safety labels on the machine Never remove or damage them Please write information such as the invoice number and the number of the sale receipt here in this box DESCRIPTION Oil drainer is used during oil changes or vehicle repairs This new model of oil drainer is equipped with a special equipment to make oil draining easier from hard to reach areas or if you do not have access to the oil pan drain plug The oil may be vacuumed out through the measuring cylinder offering immediate control of the drained amount After the spherical valve is closed you may transfer the oil from the reservoir to collection tanks using compressed air The entire equipment is very mobile Your device was manufactured with modern technology using high quality components Drain T2197 offers reliability and long
8. nty period will be extended for the period of time for which the machine has been in the service centre possession If the repair or defect is not covered by the warranty policy all costs including the repair and shipping will be paid by the owner of the machine tool We recommend sending the machine in its original packaging Please also enclose brief description of the defect with the packaging 7 Before sending the machine for repair clean it thoroughly If the received machine is dirty it may be rejected by the service shop or you may be charged a cleaning fee SERVICE Logistic centre Klecany Topolova 483 250 67 Klecany Czech Republic Claim department phone number 266 190 156 T mobile 603 414 975 266 190 111 O2 601 218 255 Fax 260 190 100 Vodafone 608 227 255 http www KHnet cz Email servis KHnet cz Product OIL DRAINER WITH VACUUM Type T2197 Serial number product series Date of manufacture Repair centre notes Date of sale stamp signature Without the correctly filled warranty card or without proof of purchase receipt including the product type invoice purchase receipt no warranty claim will be processed Dear customer Thank you for purchasing equipment from KH Trading s r o Our company is ready to offer you our services before during and after you buy our product If you have any question comment or idea please contact our business centre We will do our best to address your co
9. operation life TECHNICAL SPECIFICATION Reservoir volume The temperature of the vacuumed oil should be between Measuring cylinder volume Recommended inlet pressure Suction pressure of the vacuum pump Vacuum probes diameter 6 x 4 mm flow volume 0 4 0 6 l min 6 x 5 mm flow volume 0 4 1 min 8 x 6 mm flow volume 1 1 6 l min 8 x 7 mm flow volume 1 1 8 l min The accuracy of instructions graphs and information contained herein depends on the printing date Due to continuous product improvement the manufacturer reserves the right to change the technical parameters of the product without prior customer notification REPAIR AND MAINTENANCE REPORT SAFETY INSTRUCTIONS Report and maintenance report Symbols used in this manual A N Warning This symbol informs you about the risk of personal injury or damage to the machine REPAIR AND MAINTENANCE REPORT SERVICE SHOP or materials Use personal safety protection gear Do not use open fire around your machine Do not smoke during work AN General instructions e Make sure you know your tool or machine and you are familiar with its operating procedure Know the hazards that may occur if not used correctly e f other person is using this machine make sure that he knows how to safely operate this equipment and that he is familiar with hazards and risk that may occur if not used correctly e Pay special attention to safety notes and safety labels on the m
10. pe diameter 8 x 7 1 pc 4 nylon pipe diameter 8 x 6 mm 2 pcs 5 brass pipe diameter 6 x 5 1 pc 6 nylon pipe diameter 6 x 4 mm 2 pcs 7 measuring cylinder 1 pc 8 funnel 1 pc DISPOSAL Used oils as well as other fluids are classified as hazardous waste and must be disposed off in accordance with valid waste management rules and regulations When the operational life of your device is over dispose off it in accordance with valid rules and regulations Your product is made of metal and plastic parts that may be recycled when separated 1 Disassemble all parts 2 Separate all parts according to the material they are made of e g metals rubber plastics etc Take the separated parts to the recycling facility near you Information about the locations of recycling centres may be found at your local City office or throughout an Internet search
11. t your device for leakage If you find a leak fix it immediately Inspect the hose tightness regularly Do not store the old oil in the reservoir too long to prevent oil decay Do not expose your machine to direct sun light Keep your tools clean Dirt from tools may enter the inner machine mechanism and cause damages to the tools or machine Do not use aggressive cleaning solution or paint thinners to clean the machine IMPORTANT NOTICE Only qualified person may operate this equipment Never smoke around the machine Best oil temperature for pumping is 15 5 37 7 C 60 100F Engine oil viscosity at this temperature is about 1 3 x higher than that for water Therefore oil flow is slower than water flow If the oil temperature is lower the oil flow is lower too and you may not be able to pump it out of the vehicle or transfer it The output pressure should be plus 10 bar for air compressors equipped with a pumping unit and plus 8 bar at the end of the pumping unit hose If the bar is less than 8 bar you may not be able to pump the oil out or the flow may be significantly lower due to the small suction pressure Besides those two factors that must be taken into consideration first you also have to select the correct probe For straight probes you may use long brass pipe with flow capacity of 1 8 per minute or small brass pipe with flow capacity of 1 4 per minute For flexible plastic probes you may chose large pipe with
12. warranty enclose the warranty card and proof of purchase receipt After the warranty period expires we repair your machine for a special price To prevent possible damages during shipping packed the machine carefully or use the original packaging material We are not liable for damages occurred during shipping due to improper packaging Note Pictures and contents in this manual may slightly differ from the actual product or accessories It is due to continuous improvement of our products Such small differences have no effect on the product functionality ASSEMBLY OPERATION A Pumping the engine old oil inside the reservoir 1 Connect the appropriate probe to the suction hose Push the probe through the oil dipstick opening and close the suction hose faucet 2 Open the valve faucet that connects the measuring cylinder with the reservoir Close the valve for oil draining at the elbow pipe speed clutch valve in the upper part of the reservoir and the funnel valve 3 Connect the vacuum generator to the hose with compressed air and open the valve with compressed air The pressure gauge will show value in pressure decrease 4 When the vacuum reaches minus 0 5 bar open the valve on the suction hose The machine will vacuum the oil from the vehicle engine to the funnel via the suction hose B Pumping the engine oil to the transparent measuring cylinder 1 Connect the appropriate probe to the suction hose Push the probe through the oil
Download Pdf Manuals
Related Search