Home

DS-7604NI-E1/4P DS-7608NI-E2/8P DS-7616NI

1. Figure 65 Playback Menu Figure 38 shows main steps to play record Searching for Recorded Files The Playback Interface allows for easy searching of recorded files To search for recorded files using the Playback Interface 1 2 3 5 Enter the Playback menu shown in Figure 37 by going to Menu gt Playback gt Record Select the channel to search for recordings on Select the date to search for recordings on using the calendar The system date is shown on the left of the calendar You may change the month and year of the calendar by clicking the left and right arrows next to the month and year Dates with recordings in the selected month and channel are displayed in light blue Dates without recordings are light gray The active selected date is lighted up with a green box Click on the desired date that is highlighted in light blue to search for recordings If recordings exist the timeline will be filled with blue bars to designate recorded files The playback marker indicated by a green vertical line will automatically jump to the beginning of the earliest recordings for the selected date The marker can be moved to any other location by clicking on the desired position on the blue bars or drag it Select in the Playback Controls to start playback of the recording Playing Back Recorded Files After finding the recordings you would like to play back you may use the Playback Controls to navigate through
2. dave MEM RM UNI E 14 IR Remote Control Operations 5 oor eoo 15 MOUSE ined 18 ehe t betae ip 18 2 Activating DVR 50 edet d Pedes 20 Getting eC epe E EE 39 statne Upand Shuttme Down Your NVR 40 tema nateneaeies 40 S do D SEQUENS 40 YOU NIS oie edel teu Ea ous 40 DEockimos Y out NV I it s rates ct 40 B Hr 42 Checkins tbe Sus OF 0f IN VIS eset cess iO sel alee a 43 nione d neci Eoo a mc Ei oan ec ee 47 live nist TEES 48 Undersndina Live Peed ICOlS 22225 eee eti Uaec toe 48 Cperdunp
3. 14 D14 1 Aug gt 4 2014 5 S 2 345 6 89 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 bme po i 2014 06 27 14 43 47 2014 08 07 15 21 02 Figure 66 Full Screen Playback Mode m Clicking BH will return to the original playback mode 7 Click the Mute button to turn on and off audio during playback 8 Click to enable digital zoom Once enabled the regular recorded feed will be shown in the lower right corner while the zoomed in view will be shown on the full screen The zoomed in region be changed by moving the red rectangle in the regular recorded feed window 9 Click to add tag and manage it 71 DS 7600 Series NVR User s Manual 10 Click to control playback Playing Back Multiple Channels You may also playback recordings from multiple channels simultaneously To playback recordings from multiple channels 1 2 3 4 9 Note Search and select recording to playback in the Playback Interface Enter into Full Screen mode shown in Figure 39 by clicking the Full Screen button In Full Screen mode you may select additional channels to playback by clicking the checkbox next to the desired camera in the Channel Selector panel Playback will begin simultaneously on the selected channels You may stop playback on any of the channels b
4. Figure 46 Image Settings Menu 51 DS 7600 Series NVR User s Manual 2 Youcan also adjust the image parameters like Brightness Contrast Saturatio m and sharpness a dragging the corresponding icon The affect will be displayed immediately on the screen 3 Click the OK button to save the settings and back to the Live Feed mode You can also enter the Image setting menu by going to Menu gt Cameras Setup gt Image as shown in Figure 20 The steps are similar to the live feed icon setting steps amera 01 D1 E Image ite Balance Figure 47 Image Settings Menu Live View Strategy Set the strategy for selected channel Steps 1 Click the Live View Strategy icon for a selected channel This will bring up the Live View Strategy menu as shown in Figure 21 Figure 48 Live View Strategy Menu 2 There are three strategies for selection Real time Balanced and Fluency Select one strategy according to the real situation 3 Click OK to save the settings 52 DS 7600 Series NVR User s Manual Using Display Menu The Display Menu can be accessed by right clicking the mouse on any of the display in Live Feed mode The Display Menu as shown in Figure 22 allows you to quickly change into different display modes and to start stop auto switching of the display modes Menu Single Screen Multi screen Previous Screen Next Screen Start Auto switch Start Recording Add IP Camera Output Mode
5. VISION DS 7604NI E1 4P DS 7608NI E2 8P DS 7616NI E2 16P NVR USER S MANUAL Version 3 3 2 DS 7600 Series NVR User s Manual Hikvision Network Video Recorder User s Manual This manual as well as the software described in it 1s furnished under license and may be used or copied only in accordance with the terms of such license The content of this manual is furnished for informational use only is subject to change without notice and should not be construed as a commitment by Hikvision Digital Technology Co Ltd Hikvision Hikvision assumes no responsibility or liability for any errors or inaccuracies that may appear in the book Except as permitted by such license no part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical recording or otherwise without the prior written permission of Hikvision HIKVISION MAKES NO WARRANTIES EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE REGARDING THE HIKVISION SOFTWARE HIKVISION DOES NOT WARRANT GUARANTEE OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE HIKVISION SOFTWARE IN TERMS OF ITS CORRECTNESS ACCURACY RELIABILITY CURRENTNESS OR OTHERWISE THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE HIKVISION SOFTWARE IS ASSUMED BY YOU THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED
6. Audio On Audio Off Icon Enable disable audio for selected channel PTZ Control Icon Enable PTZ control mode for the selected channel Digital Zoom Icon Zoom in the selected area to the full screen Image Settings Icon Enter the image setting menu for selected channel Live View Strategy Icon Set strategy for selected channel including Real time Balanced and Fluency x Close Icon Exit out of current setting and return to previous mode Operating the Live Feed In Live Feed mode you may adjust the settings for individual cameras by left clicking on the desired channel with the mouse The selected channel will be surrounded with a green border as shown in Figure 16 48 DS 7600 Series NVR User s Manual Figure 43 Live Feed Mode The settings you may adjust with each channel include Manual Record Enable disable manual record by clicking the icon for a selected channel Instant Playback Click the Instant playback icon to show the record in last five minutes If no record is found it means there 15 no record during the last five minutes Audio Enable disable audio for a selected channel by clicking the Enable disable Audio icon PTZ Control If the selected camera is a PTZ camera you may control it directly from the display 1 Select the display that corresponds to a PTZ camera 2 Click the PTZ Control icon to bring up additional PTZ control buttons as shown in Figure 17 49 DS 7600 Series NVR User s
7. Click to exit out of the menu 58 DS 7600 Series NVR User s Manual CHAPTERS5 Record Settings 59 DS 7600 Series NVR User s Manual Configuring Settings for Recording There are multiple ways to setup your NVR for recording They include setting up a recording schedule triggering a recording by motion detection and or a sensor alarm Configuring Recording Settings Before setting your NVR up for recording certain settings should be configured first The first set of settings to configure in this menu 15 the recording parameters To configure the recording parameters as following steps l Enter the Parameters Settings menu by going to Menu Recording Configuration Parameters as shown in Figure 27 Substream Record Camera amera 01 D1 rz 2048 1536 ain Stream Figure 54 Parameters Settings Menu 2 Select main stream tab to configure the parameters of main stream 1 2 3 4 5 6 7 Select the camera to configure in the Camera dropdown list Select the Recording Mode to configure Both Continuous and Event can be configured Select the stream type in the Stream Type dropdown list If the camera supports audio input the options will include Video amp Audio and Video Select the camera resolution in the Resolution dropdown list The options for the camera resolution are various according to the IP camera Select the bit rate type in the Bitrate Type dropdown list The options for t
8. Before connecting and operating your device please be advised of the following tips Ensure unit is installed in a well ventilated dust free environment Unit is designed for indoor use only Keep all liquids away from the device Ensure environmental conditions meet factory specifications Ensure unit is properly secured to a rack or shelf Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive electronics within the unit Use the device in conjunction with an UPS if possible Power down the unit before connecting and disconnecting accessories and peripherals A factory recommended HDD should be used for this device mproper use or replacement of the battery may result in hazard of explosion Replace with the same or equivalent type only Dispose of used batteries according to the instructions provided by the battery manufacturer DS 7600 Series NVR User s Manual CONTENTS C HAT LEREIntFoductiOnzo nnne ade d obo Ed E Ide IDE 8 BOE ep p 9 DN 9 Rean addi idm 11 Product pplicadomDISPt otf as docs ub Eodem a eoque slit 13 dtt a MM LL MEIN MN d ME LI 14 PCO IMU AIC
9. Add New Device Type Activation Security Resource Usa HDD Statu User Name admin Password ic nf at nainea Confirm Password OK Cancel Online Device 3 gt Refresh Every 155 Client AddAll Modify ResetPassword ctivate Filter IP Device Type Firmware Version Security ServerPort Start Time Ac 10 102 102 209 DS 6704HFI V1 2 0build 140414 Active 8000 2015 05 05 10 25 01 Nc Encoding device DVRIDVS NVRAPCAPD iVMS 4200 10 102 102 210 DS 7608NI SE 8P V2 3 10build 141128 Active 8000 2015 04 09 09 00 59 Nc PCNVRAVMS 4200 EncodeCard server yperations are stopped Tool Help ivMS 4200 admin 0 1 1349221 x File System view Control Panel Device Management Group Organization Device for Management 0 EmPdmgDee 00 AddDevice Di Modi X Delete emote Co Allocatic OR Code vate Refresh All Add New Device Type Activation Security Resource Usa HDD Statu User Name admin Password Confirm Password Cancel Online Device 3 Refresh Every 15s Client Add All Modify ResetPassword Activate Filter IP Device Type Firmware Version Security Server Pot Start Time 10 102 102209 DS 6704HFI V1 2 Obuild 140414 Active 8000 2015 05 05 10 25 01 Encoding device DVRI DVS NVRAPCAPD iVMS 4200 10 102 102210 DS 7608NI SE
10. 0 12 6 23 1 Cancel Figure 113 Network Settings Menu To export network packet By connecting the NVR to network the captured network data packet can be exported to USB flash disk SATA CD RW and other local backup devices 1 Enter the Network Detection menu by going to Menu gt Maintenance gt Network Detection 2 Select the Network Detection tab to enter the Network Detection menu 3 Click the Export button to start exporting 4 After the exporting is complete click OK to finish the packet export as shown in Figure 114 Figure 114 Export Process Bar Note Click the Refresh button if the connected local backup device cannot be displayed When it fails to detect the backup device please check whether it is compatible with the NVR You can format the backup device if the format is incorrect To view network status 1 Enter the Network Stat menu by going to Menu gt Maintenance gt Network Detection 2 Select the Network Stat tab to enter the Network Stat menu as shown in Figure 115 134 DS 7600 Series NVR User s Manual Traffic Network Detection IP Camera 12Mbps Remote Live View Obps Remote Playback Obps Receive Idle 28Mbps Net Send Idle 40Mbps Figure 115 Network Stat Interface 3 Check the bandwidth of IP Camera Remote Live View Remote Playback Net Receive Idle and Net Send Idle 4 Youcanclick the Refresh button to get the newest status 135
11. 1 IPv6 Address IPv6 Gateway IPv6 Prefix Length HTTP Port Device Serial No DS 2CD4A35FWD IZHS20 Enable DHCP Password Device Activation New Password 290099009 Strong Confirm Password 27 DS 7600 Series NVR User s Manual Online Devices 17 Help Total number of online devices 3 1 Save as Excel Refresh Modify Network Parameters Device Type IPv4 Address Security Software Version IPv4 Gateway 192 168 1 64 DS 2CD4A35F 192 168 1 64 Active V5 3 0build 150417 192 168 1 1 8000 DS 7608NI SE 10 102 102 210 Active V2 3 10build 141128 10 102 102 Subnet Mask 255 255 255 0 DS 6704HFI 10 102 102 209 i 2 40414 10 102 102 IPv4 Gateway 192 168 1 1 IPv6 Address IPv6 Gateway IPv6 Prefix Length HTTP Port The device is activated ID 001 Device Serial No DS 2CD4A35FWD IZHS20 Enable DHCP Password Device Activation New Password 9900099929 Strong Confirm Password Figure 19 Confirmation Window DS 7600 Series NVR User s Manual iVMS 4200 Windows Client Software v2 3 1 3 or higher Activation 1 2 Launch the iVMS 4200 software Go to Control Panel Device Management Figure 15 On the bottom of the screen in the Online Devices section the screen will display all Hikvision devices on the network A new field called Security will display whether the DVR NVR is active or not Figure 16 If the DVR NVR
12. BY SOME STATES THE ABOVE EXCLUSION MAY NOT APPLY TO YOU IN NO EVENT WILL HIKVISION ITS DIRECTORS OFFICERS EMPLOYEES OR AGENTS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL INCIDENTAL OR INDIRECT DAMAGES INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS BUSINESS INTERRUPTION LOSS OF BUSINESS INFORMATION AND THE LIKE ARISING OUT OF THE USE OR INABILITY TO USE THE HIKVISION SOFTWARE EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU DS 7600 Series NVR User s Manual Regulatory information FCC information FCC compliance This equipment has been tested and found to comply with the limits for a digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense FCC conditions This device complies with part 15 of the FCC Rules Operation is subject to the following two co
13. Connect the NVR to a VGA HDMI monitor You will only see NVR menu system when it s connected to a VGA HDMI monitor e Press the POWER switch on the back rear panel The unit begins to start up Shutdown Your NVR 1 Shutdown your by going to Menu gt Maintenance click in lower left corner to pop up the Shutdown menu as shown in Figure 7 Cancel Figure 34 Shutdown Menu 2 Select the Shutdown button 3 Click the Yes button 4 When an attention message with words Please power off shown in the windows press the POWER switch to power off Rebooting Your NVR While in the Shutdown menu Figure 7 you may also reboot your NVR by clicking Reboot Locking Your NVR Locking your NVR will return you to the Live Feed mode which will require the correct user name and password to exit out of it and do operation You have two methods to lock your NVR e Enter the Shutdown menu by going to Menu gt Maintenance gt Shutdown and click the Lock button e Click on lower left corner of Menu interface to lock your NVR Note You can also set auto lock time to lock the menu for a certain period of time inactivity Enable auto locking by going to Menu gt System Configuration gt General gt More Setting and select auto lock time in the Auto Locktime dropdown list 40 DS 7600 Series NVR User s Manual Note The description figures in this manual are all taken from model DS 7608NI E2 8P as an exam
14. DS 8704HFI Figure 16 Password Field with Weak Strength Password 192 168 164 Inactive 8000 10 102 102 210 Active 8000 10 102 102 209 Active 8000 il Save as Excel Refresh Port 8000 8000 8000 8000 Software Version V5 3 Obuild 15 V5 1 7build 14 V1 2 Obuild 14 V2 3 10build 1 V5 2 14 Modify Network Parameters IP Address 192 168 1 64 Port 8000 Subnet Mask 2552552550 IPv4 Gateway 192 168 1 1 IPv6 Address IPv6 Gateway IPv6 Prefix Lengt 0 HTTP Port 80 Device Serial DS 2CD4A35FWD IZt Enable DHC Password Device Activation New Password eeeeeecce Confirm Password OK Valid password range 8 16 You can use a combination of numbers lowercase uppercase and special characters for your password with at least two kinds of them contained Save Excel Refresh Software Version V5 3 0build 150417 V23 10build 141128 10 102 102 1 IPv4 Gateway 192 168 1 1 V120build 140414 10 102 102 1 Modify Network Parameters IP Address Port 8000 Subnet Mask IPv4 Gateway IPv6 Address Gateway IPv6 Prefix Length HTTP Port Device Serial No New Password Weak eo Confirm Password 192 168 1 64 2552552550 192 168 1 1 0 80 DS 2CD4A35FWD IZHS20 Enable DHCP OK A message indicates that the password has to
15. Event Record item This will bring up an attention box shown below If you click yes it will start all day continues event recording of all channels Output Mode Click the Output Mode item This will bring up an Output Mode menu shown below Four modes are available Standard Bright Gentle and Vivid Select one and click the Apply button to save the setting Note Before you start Auto switch you should set Dwell Time in Live View setting menu by going to Menu gt System Configuration Live View General Note 54 DS 7600 Series NVR User s Manual After 20 seconds of inactivity the NVR will automatically exit out of the Display menu and go back into the Live Feed mode Note The auto lock menu setting is selected by default meaning the Admin password must be enter to exit out of the Live Feed into the Main Menu 55 DS 7600 Series NVR User s Manual Configuring Live Feed Displays Live Feed displays can be customized to your own needs To customize display settings 1 Set menu output resolution and mouse pointer speed by going to Menu gt System Configuration gt General Display as shown in Figure 23 Iime Date 024 768 60HZ Figure 50 Display Menu The settings available to configure in this menu include Language The default language used 15 English Resolution Select the appropriate resolution of menu output Mouse Pointer Speed Set the speed of mouse pointer and 4 leve
16. Playback Playback File Management Recording Configuration Cameras Setup System Configuration Maintenance System Infomation Useradmin Menu Click to go to Main Menu If the system is locked you must enter the current Admin password to exit out of the Live Feed IPCamera 01 Single Screen Multi screen IPCamera 02 Previous Screen 03 Previous Screen Next Screen IPCamera 04 Next Screen Start Auto switch 05 Start Auto switch Start Recording 06 Start Recording Add IP Camera 07 Add IP Camera Output Mode 08 Playback Output Mode Playback Single Screen Multi Screen Click to switch the display mode 53 DS 7600 Series NVR User s Manual Previous Screen gt Next Screen Previous Screen Next Screen Click to view the previous next set of display In a 2x2 mode this will show the next four display In a 3x3 mode this will show the next nine display Start Auto switch gt Stop Auto switch Start Stop Auto Switch Click to start stop auto switch Auto switch will cycle through selected cameras Switching of camera can be based on an individual or multiple cameras Menu Single Screen Multi screen Previous Screen Next Screen Start Auto switch M Continuous Record Add IP Camera Event Record Output Mode Playback Start Recording Click the Continues Record
17. conjunction with the A FOCUS button The DIRECTION buttons are used to navigate between different fields and items in menus PRECIO In the Playback mode the Up and Down button is used to speed up and slow down recorded video The Left and 12 Right button will select the next and previous record files In Live View mode these buttons can be used to cycle through channels In PTZ control mode it can control the movement of the m 16 DS 7600 Series NVR User s Manual PTZ camera The ENTER button is used to confirm selection in any of the menu modes It can also be used to tick checkbox fields ENTER In Playback mode it can be used to play or pause the video In single frame Playback mode pressing the button will advance the video by a single frame In Auto switch mode it can be used to stop start auto switch Enter the PTZ Control mode In the PTZ Control mode it is used to adjust the iris of the PTZ camera In PTZ Control mode it will turn on off PTZ light 1f applicable o PTZ 4 ON 5 In Playback mode it is used to switch between play and reverse play PTZ Control Buttons to adjust the iris focus and zoom of a PTZ camera Cycle through tab pages In synchronous playback mode it is used to switch between 7 8 5 channels Aim the remote control at the IR receiver located at th
18. detection 1 Enter Tamper proof menu shown in Figure 85 by going to Menu gt Cameras Setup gt Tamper proof 107 DS 7600 Series NVR User s Manual D Zone Setting Figure 85 Tamper proof Detection Menu Select the camera to setup video tampering detection in using the camera dropdown list Check the Enable Tamper proof checkbox to enable tamper proof Adjust the Sensitivity for video tampering detection Using the mouse select the region on the preview screen for where you would like to enable tamper proof on Press the Clear button to clear region Press the Set button to set up linkage action Select the Arming Schedule tab to set the arming schedule Up to 8 periods be configured If the same schedule can be applied in other days click Copy 2 Select the Linkage Action tab to set the actions to take if tamper proof 15 detected The detail instruction of the actions please refer to Page 75 3 Click Apply to save the settings Click OK to back to the previous menu Click the Apply button on the Tamper proof interface to save the settings 108 DS 7600 Series NVR User s Manual Configuring Video Loss Video loss detection can be enabled on any of the channels on your NVR to detect the loss of video To configure video loss detection 1 Enter the Video Loss menu shown in Figure 86 by going to Menu gt Cameras Setup gt Video Loss Camera Figure 86 Video Los
19. of online devices 5 8 Save as Excel Refresh Modify Network Parameters IP Address 192 168 1 64 Port 8000 Subnet Mask 255 255 255 0 IPv4 Gateway 192 168 1 1 IPv6 Address IPv6 Gateway IPv6 Prefix Lengt 0 HTTP Port 80 ID Device Type IPv4 Address Security Port Software Version 003 DS 2CD4A35FWD IZHS 192 168 1 64 8000 V5 3 build 15 001 DS 2CD6412FWD 11 10 102 102 252 8000 51 7 14 002 5 6704 10 102 102 209 8000 V1 290build 14 004 DS 7608NI SE 8P 10 102 102 210 8000 V2 3 10build 1 005 DS 2CD2412F W 10 102 102 53 8000 V5 2 3build 14 Device Serial DS 2CD4A35FWD IZF Hisky Password Enable DHC Password Device Activation New Password eeeeeeece Confirm Password eeeeeeece OK The Strength Meter does not light up Figure 14 Password Field with Risky Unacceptable Password 25 DS 7600 Series NVR User s Manual Online Devices i Help Total number of online devices 5 IPv4 Address 192 168 1 64 10 102 102 252 10 102 102 209 10 102 102 210 10 102 102 53 ID Device Type 003 DS 2CD4A35FWD IZHS 001 DS 2CD6412FWD 11 002 5 6704 004 DS 7608NI SE 8P 005 DS 2CD2412F W Figure 15 Risky Unacceptable Password Warning Message Total number of online devices 3 ID Device Type IPv4 Address Security Port 001 DS 2CD4A35F 002 DS 7608NI SE 003
20. sent out from the NVR Enable Attached Picture Enabling will attach a small picture segment Interval can be set below the Enable Attached Picture checkbox to the out going email Enable Email Interval Enabling will let email be sent between a specified time interval Receiver Click to edit Receiver Settings Input receiver s name and address Click Apply to save the settings The email address will be added to the Receiver list You can also delete the receiver by clicking 4 You may now test the email settings by clicking the Test button If the settings have been properly configured the recipient will successfully receive a test email 5 Select the E button to save the email settings and select EA to return to the previous menu Selecting without clicking Save will quit out of the menu without saving settings 102 DS 7600 Series NVR User s Manual 103 DS 7600 Series NVR User s Manual Configuring Cameras Adding IP Cameras The DS 7600NI series NVR provides PoE interfaces which can connect to IP cameras directly The PoE interface supports Plug and Play function You can also connect to the online IP camera manually Before configuring IP cameras please ensure the network settings for your NVR is properly setup To manage IP cameras Plug and Play 1 Enter Network menu by going to Menu gt System Configuration gt Network and check the Internal NI
21. stay idle in order to prolong its lifetime and save enegy To enable HDD sleeping 1 Enter the HDD menu by going to Menu gt System Configuration gt HDD 2 Select the Record Information tab as shown in Figure 92 HDD Information Hecord information Storage Mode HDD Figure 92 Record Information Menu 3 Check the Sleeping checkbox 4 Click the Apply button S Click to exit Configuring Quota Mode Each camera can be configured with allocated quota for record To configure quota mode 1 Enter the quota mode menu by going to Menu gt System Configuration gt HDD 2 Select the Storage Mode tab as shown in Figure 93 B LES r e System Configuration HDD information Record Information Mode P Camera 1 3126 Free Quota Space 3726 GB Figure 933 Quota Mode Settings Menu 116 DS 7600 Series NVR User s Manual Select the Mode to Quota Select a camera for which you want to configure quota Enter the storage capacity in the text fields of Max Record Capacity GB If the same settings can be applied in other channels click Copy and select the corresponding channels 7 Click the Apply button to save the settings D Ege Note If the quota capacity is set to 0 then all cameras will use the total capacity of HDD for record Managing HDD Group Multiple HDDs can be managed in groups Video from specified channels can be recorded onto a particular HDD group thro
22. the Dave Deeds etitm 48 Me ee 53 Dave Peed DISD AVS Ra Satine lana E 56 Camera OTe rises cecal denen Loca atii RACES UON at Id anal done ies 57 COM A PT ERS Record UIN NEUVE 59 TOF 60 Se Ul p Soo ede Os 60 Record schedule tet addet quu ue edes dua DE 62 Con enne Holiday setti S scd eua diae taciti E iurat 66 Playa ek N E Eve Ove uu Qood DD Ua VE Eu Re 68 Play me Backa TR CC ONIN act ae on edt haee taal basada e oues A beta 69 Understanding the Playback Interface soo c be iu aetema 69 Seating For BIOS eut 70 DS 7600 Series NVR User s Manual back Recorded 70 Playin Viti ple E EMO 72 Up to 16 ch synchronous playback at 4CIF real
23. the recording The controls found under Playback Controls include Play Forward Button Button to playback recording Play Reverse Button Button to playback recording in reverse 70 DS 7600 Series NVR User s Manual Speed Down Button Button to decrease play speed Speed Up Button Button to increase play speed Mute Button Button to enable and disable audio in playback mode Add Default Tag Button to add default tag Add Customized Tag Button to add customized tag and input tag name Edit Tag Button to check edit and delete tag s Enter Exit Full Screen Mode Button to enter into and out of full screen mode To playback recorded files 1 Search and select recording to play back in the Playback Interface 2 Click the Play Forward button to begin playback of selected recording and the Pause button to pause playback 3 You may slow down or speed up the playback speed by clicking the Speed Down Speed Up button You can click to zoom in zoom out the timeline and select the exactly time 5 Click the Full Screen button to enter full screen playback mode shown in Figure 39 gt Normal L Camera 01 D1 02 D2 03 D3 04 04 5 06 D6 IPCamera 07 07 08 D8 Camera 01 09 10 010 m aiii 11 011 4 12 012 L 13 D13
24. the selected preset number 6 Repeat the steps to save more presets Note Only the first 17 presets are shown in the table To save or recall more presets click on the button Clicking button will bring up a selection box for presets up to 255 To customize PTZ patterns 1 Enter PTZ menu by going to Menu gt Cameras Setup gt PTZ Select the More Settings tab as shown in Figure 61 Select a Pattern Number to set from the dropdown list 4 Click to begin recording the movement of the PTZ Move the PTZ to the desired locations using the PTZ control buttons Click to save pattern To test out your new pattern click o to play and o to stop The PTZ should move as it did during the recording process You may click the stop button at any time to end the pattern Clicking the play button again will start playing the PTZ pattern again at the initial position To customize PTZ patrols 1 Enter the PTZ menu by going to Menu gt Cameras Setup gt PTZ gt More Settings as shown in Figure 61 Select the More Settings tab as shown in Figure 61 Select a Patrol Number to set from the dropdown list Click to pop up a KeyPoint box and add key point Select a Preset Number from the dropdown list that you would like to add to the patrol Set the duration and speed Click the OK button The Preset Number will be added to the patrol list Repeat steps 4 5 until you have included all t
25. time Playing Back 72 CHAPTER e EP EP a 74 up Video C ce taa t ernest 75 PEENE V ean Dn LM IA M LM 75 up Video 76 Backine tip Recorded Piles 78 ITAPTERSSysten 79 Contieurme 5 ace 80 Connew ie Generalis e EIE 80 OMT TINS RI 81 Conie urin V AN Emo a 82 Con eunn UIP IP E 82 83 User ACCOUN S cio doni rabo 94 Chano PASS Wy Oat ute teta dan inea eco 94 Adding a New Remote LEocab Set 85 Chane the DermisstOD Ol N 86 Perine T DD 88 TUSO acs a
26. 0 102 102 DS 2CD6412FWD 11 V5 1 7build 140904 Active 8000 2015 05 18 15 56 09 N iVMS 4200 PCNVR IVMS 4200 EncodeCard server 10 102 102 DS 7608NI SE 8P V2 3 10build 141128 Active 8000 2015 04 09 09 00 59 N i 4 No e mail account is configured and all the sending operations are stopped goa amp Figure 30 Risky Inadequate Password Warning Window ON English v Activation User Name admin Password Confirm Figure 31 Weak Acceptable Strength Password 36 DS 7600 Series NVR User s Manual HIK VISION English User Name admin Password eet ie n Medium Valid password range 8 16 You can use a combination of numbers lowercase uppercase and special character for your password with at least two kinds of them contained Essa Figure 32 Medium Acceptable Strength Password HIKVISION English Activation User Name admin Password eeesesono i9 510 9 Valid password range 8 16 You can use a combination of numbers lowercase uppercase and special character for your password with at least two kinds of them contained Confirm perenne Figure 33 Strong Acceptable Strength Password 37 DS 7600 Series NVR User s Manual Password Strength Levels STRENGTH LEVEL DESCRIPTION Password length is fewer than eight characters Level 0 Risky contains only one type of character is the same as the u
27. 01 Event Search Menu 122 DS 7600 Series NVR User s Manual 2 Select the Event Type you want to search File type includes Alarm Input and Motion files 1 Note If you select type Motion First you need to choose the cameras that you would like to include in the search If you would like include all IP cameras in the search check the IP Camera checkbox Select the start time and the end time Click the Search button A list of results with your search criteria will be shown at a pop up window You can set the Pre play and Post play time Select one result to see the details by clicking Details button or quick export by clicking the Quick Export button If you select type Alarm Input First you select one alarm input channel or you can check the Alarm Input No box to select all channels Select the start time and the end time Click the Search button A list of results with your search criteria will be shown at a pop up window and you can select recorded files to do proper settings The IP cameras need to support alarm input if you want to search through the type of alarm input 123 DS 7600 Series NVR User s Manual Locking and Unlocking Recorded Files To lock and unlock recorded files Search for recorded files using the File Management menu 2 Select the file you would like to lock unlock 3 Click the Lock icon for the selected file o means locking while g means unlocking Note Locked files will neve
28. 013 05 27 08 33 26 Power Information 2013 05 27 08 33 26 Local HDD Infor Information 2013 05 27 08 33 26 Local HDD Infor Information 2013 05 27 08 33 35 Start Recording L Alarm 2013 05 27 08 33 36 Start Motion Det Exception 2013 05 27 08 33 49 IP Camera Disc A Exception 2013 05 27 08 33 49 IP Camera Disc Exception 2013 05 27 08 33 49 IP Camera Disc 201305 27 00 00 2012 05 27 ppssess i I SLIIIIIIJ Figure 107 Log Search Results 6 Click under the Detail item to view the detail information as shown in Figure 108 a DEUM Camera address 192 158 1 5 Domain Protocol HIKVISIOM Configuration port 000 Video port 1 2014 05 27 08 33 49 xception lP Camera Disconnected Figure 108 Log Information 7 Click Previous Next to view the previous next log information 8 Click OK to back to the previous menu 9 If applicable you may also view the associated video to the selected log entry by 10 Log files can also be exported onto a USB storage device To export a log file connect a USB storage device to the NVR select the log files to export and click the Export button 11 Click to exit out of menu 131 Network detection You can view the network traffic to obtain real time information and connecting status of your NVR To view network traffic 1 Enter the Network Detection menu b
29. 1 Enter the Factory Default menu shown in Figure 104 by going to Menu gt Maintenance gt Factory Default system Maintenance Figure 104 Factory Default Menu 127 DS 7600 Series NVR User s Manual 2 Select the OK button to restore factory defaults or select E to return to the previous menu Note Network information such as IP address subnet mask and gateway will not be restored 128 DS 7600 Series NVR User s Manual Exporting amp Importing Configuration Configuration information from your NVR can be exported to a USB storage device and imported into another NVR This will allow you to efficiently setup the same configuration on numerous NVRs To export NVR configuration 1 7 Enter the Import Export menu shown in Figure 105 by going to Menu Maintenance Import Export n Device Figure 105 Import Export Menu Connect the USB storage device to a USB port on the NVR Click the Refresh button The contents of the USB storage device will be shown on the screen You can click the New Folder button to create a new folder Select the location where you would like the configuration to be stored on the USB storage device Click Export to export a configuration file to USB storage device The configuration file will be named devCfg bin Click pes to exit out of the Import Export menu To import NVR configuration 1 Enter Import Export menu shown
30. 5 LLLA D eade d 109 icu Au lito 109 110 10 Disk Management 112 INA IAT DIS costa EU M EI ME EE EE 113 Checkine Status Li e d iode tote 113 Tori dipl D D 113 cu na EM 115 Enabne EIDID OV ree tee en Ce ae eo iU AC EE LAT RU 115 HDD S 5 T M 116 C onppe rmie MOOO 116 Nanas mo HDPC TOUD E 117 TBD OO 119 119 Sector Detection i3 ond adnata an ataca du edax dad MU dudar 119 Manas me MN DATI EN MM vee EE DEDE 121 Ed CMI TOR 121 Sear MN FOr P
31. 6 Note At least 2 hard disks must be installed when you want to set a HDD to Redundancy mode and one of them with R W property Configuring Record Schedule A record schedule allows you to schedule multiple time periods per day for recording Setting up a record schedule will allow you to further conserve disk space by recording only during the time periods you would like to record at Steps 1 Enter the Schedule menu shown in Figure 30 by going to Menu gt Recording Configuration gt Schedule Mon 0000 2400 Tue 0000 2400 Wed 00 00 2400 0000 2400 38 Fri 0000 2400 Sat 0000 2400 Sun 0000 2400 Figure 57 Record Schedule Configuration Menu 62 DS 7600 Series NVR User s Manual 2 Select the camera to configure from the camera dropdown list 3 Check the Enable Schedule checkbox to enable the record schedule If the checkbox 1s unchecked the record schedule will be disabled 4 Edit the record schedule There are three ways to set the record schedule e Instant edit Select a day from Monday to Sunday to configure schedule for 2 Setup time periods for schedule If the 24HR checkbox is checked recording will occur over the entire day To setup multiple time periods uncheck 24HR and enter the Start End Time for the selected day The start End time are listed using a 24 hr cycle i e 18 00 is equivalent to 6 00pm Up to 8 discontinuous periods can be configured for each day 3 Sele
32. 73 by going to Menu gt Recording Configuration gt Trigger Alarm Output Alarm Input Status lt 1 Local 2 Local 3 Local 4 192 168 254 2 8000 1 Figure 73 Trigger Settings Menu Select the Alarm Input tab Select the Alarm Input No in the dropdown list Edit the Alarm Name Select the trigger Type for the external alarm input device N O means Normal Open N C means Normal Close These two types can be selected 6 Check the Enable Alarm Input checkbox to enable the selected alarm input Uncheck the checkbox to disable alarm input 7 Click the Set button to pop up the Settings menu as shown in Figure 74 I qm D 98 DS 7600 Series NVR User s Manual Arming Schedule Linkage Action PTZ Linking Figure 74 Trigger Channel Settings Menu 1 Select the Trigger Channel tab and check the checkbox of channels which you want the alarm to trigger recording Click Apply to save the settings 2 Select the Arming Schedule tab Choose one day in a week and set an arming schedule If the schedule can also be applied to other days click Copy Click Apply to save the settings 3 Select the Linkage Action tab which is same as Figure 71 to set other actions Click Apply to save the settings 4 Select the PTZ Linking tab as shown in Figure 75 to set the PTZ actions only if a PTZ camera is configured on the NVR Only one PTZ action can be selected per alarm input Click Apply to save the settings Trigg
33. 8P V2 3 10build 141128 Active 8000 2015 04 09 09 00 59 NC PCNVR IVMS 4200 EncodeCard NERO ESTE configured all the sending operations are stopped Figure 25 Medium Adequate Password Strengt 32 DS 7600 Series NVR User s Manual File System View Tool Help iVMS 4200 admin f 9 124921 Control Panel Device Management Organization Device for Management 0 i Security Resource Usa HDD Statu User Name Password ME M eee Strong Valid pa ord range 8 16 You can nation of numb lowert uppercase and character for your p ord with atleast two kinds of them contained Confirm Password eeeeeeece OK Cancel Online Device 3 lt gt Refresh Every 155 s Addto Client AddAll 7 Modify Netinfo 7 Reset Password Activate Filter IP Device Firmware Version Security Serer Pot Start Time 10 102 102 209 DS 6704HFI V1 2 0build 140414 Active 8000 2015 05 05 10 25 01 Encoding device DVR DVS NVR IPC IPD iVMS 4200 10 102 102 210 DS 7608NI SE 8P V2 3 10build 141128 Active 8000 2015 04 09 09 00 59 PCNVR IVMS 4200 J server No e mail accountis configured and all the sending operations are stopped Figure 26 Strong Adequate Password Strength File System View Tool Help A iVMS 4200 admin Control Panel z Ma
34. C IPv4 is configured properly 2 Connect the cameras via PoE interface 3 Enter the Cameras menu by going to Menu gt Cameras Setup gt IP Cameras as shown in Figure 79 B oe IP Camera Import Export PoE Setup 10 18 0 216 192 168 254 4 192 168 254 5 192 168 254 6 192 168 254 7 192 168 254 8 192 168 254 9 IPCamera 02 HIKVISION IPCamera 03 HIKVISION IPCamera 04 HIKVISION IPCamera 05 HIKVISION IPCamera 06 HIKVISION IPCamera 07 HIKVISION IPCamera 08 HIKVISION es 2 2 2 2 Um Figure 79 Cameras Configuration Menu 4 The cameras connect via PoE interface are listed with internal NIC IP address Note The Plug and Play camera cannot be deleted and edit in this interface Manual 1 Enter the Cameras menu as shown in Figure 79 2 Click the Search button to automatically detect connected IP cameras on the network 3 Left click the detected cameras The basic information of the selected camera will display on the left side of the interface 4 Click e near the IP address to modify the camera s IP address subnet mask and port Input the password and click Apply to confirm the settings 104 DS 7600 Series NVR User s Manual 5 Youcan also click Protocol to pop up a Protocol Management windows as shown in Figure 76 to edit the protocol parameters Costume Protocol Custom Protocol 1 Figure 80 Protocol Management Settings Menu 6 Click e in the camera list shown below Th
35. Client Add All Modify Netinfo Reset Password Activate Filter IP Device Type Firmware Version Security Server Port Start Time Encoding device 192 168 1 64 DS 2CD4A35FWD V5 30build 150417 Inactive 8000 2015 05 27 02 05 11 DVR DVS NVR IPC IPD 10102102 DS 2CD6412FWD 11 V5 1 7build 140904 Active 8000 2015 05 18 15 56 09 N iVMS 4200 PCNVR IVMS 4200 1 EncodeCard server 10 102 102 DS 7608NI SE 8P V2 3 1 4 141128 Active 8000 2015 04 09 09 00 59 N Figure 29 Risky Inadequate Password Strength 35 DS 7600 Series NVR User s Manual File System View Tool Help iVMS 4200 admin 0 11 36 18 x Control Panel Main View Device Management Server Group Organization Device for Management 0 Sl Activation RC Activate Refres Fit A message indicates Add New Device Type User Name admin Security Resource U HDD St that the password has Password 000000000 to meet minimum requirements Valid password range 8 16 You can use a combination of numbers lowercase uppercase and special characters for your password with at least two kinds of them contained Online Device 5 Refresh Every 155 Add to Client Add All Modify Netinfc Reset Password Activate IP Device Firmware Version Security Server Port Start Time A Encoding device 192 1681 64 DS 2CD4A35FWD V5 30build 150417 Inactive 8000 2015 05 27 02 05 11 N DVR DVS NVR IPC IPD 1
36. Group A message indicates that the password has Encoding Device Activation ORC Activate gt Refres Filter m to meet minimum Add New Device Type Nic Security Resource U HDD St requirements Organization Device for Management 0 admin User Name Password 99999999 Valid password range 8 16 You can use a combination of numbers lowercase uppercase and special characters for your password with at least two kinds of them contained Confirm Password 000000006 Cancel Online Device 5 gt Refresh Every 15s to Client Add All Modify Netinfo Reset Password 9 Activate Filter IP Device Type Firmware Version Security Server Start Time A zem 192 168 1 6 DS 2CD4A35FWD V5 30build 150417 Inactive 8000 2015 05 27 02 05 11 Encoding device DVR DVS NVR IPC IPD 10 102 102 DS 2CD6412FWD 11 V5 1 7build 140904 Active 8000 2015 05 18 15 56 09 N iVMS 4200 PCNVR IVMS 4200 EncodeCard server 10 102 102 DS 7608NI SE 8P V2 3 10build 141128 Active 8000 2015 04 09 09 00 59 N ie No e mail account is configured and the sending operations are stopped E Figure 23 Risky Inadequate Password Strength Warning Message 31 DS 7600 Series NVR User s Manual File System View Tool Help iVMS 4200 admin ES 124921 Control Panel Device Management EE Server Group Organization Device for Management 0
37. Manual 3 4 Note Figure 44 PTZ Control Mode Control the PTZ by using PTZ control buttons Pan and tilt PTZ by clicking on the directional buttons Zoom in and out using the Zoom In Out buttons and recall presets patrols and patterns by clicking the corresponding icons Below is the description of the PTZ control icons E Direction buttons and the auto cycle button Prat Focus Focus BD is is ESOS The speed of the PTZ movement Light On Off Wiper On Off LA 3D Zoom Image Centralization Menu Click to return to the Live Feed mode 50 DS 7600 Series NVR User s Manual PTZ parameters for the camera must be set correctly before the PTZ can be controlled Digital Zoom Mode Enable digital zoom on the selected channel Once enabled the regular feed will be shown in the lower right corner while the zoomed in view will be shown on the full screen The zoomed in region may be changed by moving the red rectangle in the regular feed window as shown in the Figure 18 Right click to back to the Live Feed mode Figure 45 Digital Zoom Image Settings Set the image mode and image parameters like brightness contrast saturation hue and so on for selected channel Steps 1 Click the Image Settings icon for a selected channel This will bring up the Image Settings menu as shown Figure 19 x NOT NO 4 ar 4 hr No eo
38. ameters Settings Configuring parameters restoring factory default parameters and importing exporting configuration files e Local Camera Management Adding deleting and editing of network camera s Local Advanced Operation Operating HDD management upgrading system firmware clearing I O alarm output e Local Shutdown Reboot Shutting down or rebooting NVR Remote Configuration Remote Log Search Remotely viewing logs that are saved the NVR e Remote Parameters Settings Remotely configuring parameters restoring factory default parameters and importing exporting configuration files Remote Camera Management Remotely adding deleting and editing of network camera s Remote Serial Port Control Configuring settings for RS 485 ports Remote Video Output Control Sending remote button control signal Two Way Audio Realizing two way radio between the remote client and the NVR Remote Alarm Control Remotely arming notify alarm and exception message to the remote client and controlling the alarm output e Remote Advanced Operation Remotely operating HDD management upgrading system firmware clearing I O alarm output e Remote Shutdown Reboot Remotely shutting down or rebooting the NVR Camera Configuration Local Video Export Locally exporting recorded files of the selected camera s Local Playback Locally playing back recorded files of the selected camera s Local PTZ Control Locally controlling PTZ mov
39. anging Password You can change the default password by going to Menu System Configuration User as shown in Figure 52 Admin 00 00 00 00 00 00 84 DS 7600 Series NVR User s Manual Figure 78 User Settings Menu To change the password 1 Click to pop up the Edit User menu as shown in Figure 53 00 00 00 00 00 00 Cancel Figure 79 Edit User Menu 2 Enter the old password in the Old Password textbox 3 Check the Change Password checkbox 4 Enter the new password in the Password textbox 5 Youcan enter the User s MAC Address of the remote PC If it is configured and enabled it only allows the remote user with this MAC address to access the device 6 Youcan also enter the User s IP Address of the remote PC If it is configured and enabled it only allows the remote user with this IP address to access the device 7 Click the OK button to save the setting and back to the up level Adding a New Remote Local User You may add up to 31 new users to your NVR To add new users 1 Onthe User interface shown in Figure 53 click Add to enter Add User interface as shown in Figure 54 85 DS 7600 Series NVR User s Manual 0 00 00 00 00 00 Figure 80 Add User Menu 2 Enter the information for new user including User Name Password Level and User s MAC and IP Address Level Set the user level to Guest or Operator Different user levels have different default operating permission e Guest Gues
40. as Configuring Basic PTZ Settings Settings for a PTZ camera must be configured before it can be used Before proceeding verify that the PTZ camera is connected properly To configure PTZ settings 1 adi 5 Note Enter the PTZ menu shown in Figure 64 by going to Main Menu gt Cameras Setup gt PTZ A More Settings Camera v _ Mone Tm o IK VISION Address range 0 255 Figure 854 General Settings of PTZ Configuration Select the General tab Select the PTZ camera to configure in the Camera dropdown list Configure PTZ settings including those of Baud Rate Data Bit Stop Bit Parity Flow Ctrl PTZ Protocol and Address according to the parameters of the PTZ camera s Click the Apply button to save the settings All the parameters should be exactly the same as the PTZ camera parameters For example if the PTZ camera uses the protocol of Hikvision you should select Hikvision in the PTZ Protocol field To test and verify PTZ settings 1 2 Enter the PTZ Configuration menu by going to Menu gt Cameras Setup gt PTZ Select the More Settings tab shown in Figure 65 92 DS 7600 Series NVR User s Manual General Camera Preset Pattern Patrol Paroi Ic Figure 65 More Settings of PTZ Configuration 3 Select the camera to test in the Camera dropdown list 4 Using the Directional buttons and other PTZ co
41. ay them back Understanding the Playback Interface It s important to understand how to use the Playback Interface to efficiently navigate through recorded files To access the Playback Interface shown in Figure 37 go to Menu Playback Record Normal dee Camera 01 02 Tag 03 gt Smart 04 Event Sub periods Camera 01 07 L 08 09 iPCamera 10 iPCamera 12 13 14 External File Figure 64 Playback Interface DS 7600 Series NVR User s Manual Full Screen button Going to a full screen view Normal Normal Min Ca Event Select a Camera 01 camera to 02 Tag 03 L 04 Select the Camera 01 desired date to Camera amp External File 07 L 08 L 09 L 10 11 Press PLAY to 12 begin playback 13 A IPCamoera 14 Smart Sub periods Click on the timeline to select the desired time of 21 28 4 22 23 24 25 26 27 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
42. be triggered when the NVR detects certain exceptions To setup exception configuration 1 Enter the Exception menu shown in Figure 77 by going to Menu gt System Configuration gt Exception 100 DS 7600 Series NVR User s Manual Enable Event Hint Exception Type DD Full Figure 77 Exception Configuration Menu 2 Select the Exception Type to configure The exception types include HDD Full If selected trigger action when HDD is full HDD Error If selected trigger action when errors on the HDD are detected Network Disconnected If selected trigger action when a network disconnected is detected IP Conflicted If selected trigger action if an IP conflicted is detected Illegal Login If selected trigger action when illegal logins are detected Recording exception If selected trigger action when recording exception is detected All if selected trigger action when any one of exception above is detected 3 Select the actions to take when the exception is detected More than one action can be selected The actions available includes Audible Warning NVR will sound an audio warning if exception is detected Notify Surveillance Center NVR will notify surveillance center if exception is detected Send Email NVR will send an email out to the designated recipients if exception is detected Trigger Alarm Output NVR will trigger alarm output if the connected camera supports alarm output Selecting this option will enab
43. cces pet aa C HH 88 Cheats a Password 89 SWC USEE MINNIE 89 Reset admin user s password with Password 90 C Ame Passi op Eoi 92 Comiisurine Basic PEZ 92 Customizing PTZ Presets Patterns and Patrols 93 Contpurme linm and EXCSpHIODS 95 Sette Up Monon Dele HON isa ee aUe 95 Alarm pU 98 Tar 99 100 Contieurimne Email Sell DS dia PO 101 CHAPTER 9 Camera ES NE aseo euo nonet 103 Conn cunno CANCE AG 104 OTHOT 104 DS 7600 Series NVR User s Manual Privacy 22 ene to Hon RE a a dni 107 Connew ne ibd despide vdd NONEM NAE IE EM M HP NN DUIS PM PD 107 y Ideo 088
44. ct recording type under Type for selected day of the week Recording type includes Continuous for continuous recording or Event for recording when an event is triggered 1 from detected motion for the selected time period 4 Select the Add button to add time frame to schedule The newly added time frame will appear in the schedule on the right You can click to delete selected time period the right Continuous recordings are shown in blue on the schedule while event recordings are shown in yellow An example of this can be seen in Figure 30 5 If there are scheduling errors detected error messages such as those shown in Figure 31 will appear Figure 58 Schedule Configuration Error Messages 6 Repeat the above steps to set recoding schedule for other days in the week e Edit the schedule 5 Click the Edit button on the bottom right to pop up the Edit Schedule menu as shown in Figure 32 Schedule Figure 59 Edit Schedule Menu 6 Select a day from Monday to Sunday 63 DS 7600 Series NVR User s Manual 7 9 10 11 12 1 2 3 Setup time periods for schedule If the Day checkbox is checked recording will occur over the entire day To setup multiple time periods uncheck Day and enter the Start End Time for the selected day You can select recording type for each period Click the Apply button to save the settings Repeat the above steps to set record schedule for other
45. d disks must be installed when you want to set a HDD to Redundancy mode and one of them with R W property 118 DS 7600 Series NVR User s Manual HDD Detect The device provides the HDD detection function such as the adopting of the S M A R T and the Bad Sector Detection technique S M A R T The S M A R T Self Monitoring Analysis and Reporting Technology is a monitoring system for HDD to detect and report on various indicators of reliability in the hopes of anticipation failures Bad Sector Detection _ Continue to use this disk when sell evaluation is failed aa Ses O E SMART Information Raw Read Error Rate 41399380 Spin Up Time OK 4 9 0 Start Stop Count OK 3 454 Reallocated Sector 3 0 Seok Lrror Rate OK 55 12921 69495 Power on Hours Count OK 5 1888 Spin Up Retry Court OK 4 0 4 Figure 97 5 Settings Interface To viewing S M A R T information md xd 5 Note Enter the S M A R T Settings interface by going to Menu System Maintenance HDD Detect Select the S M A R T Settings tab as shown in Figure 97 Select a HDD to view its S M A R T information list You can choose the Self test Type from the dropdown list including Short Test Expanded Test and Conveyance Test Click the Test button to start the S M A R T HDD self evaluation If you want to use the HDD even when the S M A R T checking is failed you ca
46. d like include all IP cameras in the search check the IP Camera checkbox Select the Record Type Record type includes Continuous Event Manual and All Select the File Type File type includes Locked Unlocked and All Select the start time and the end time Click the Search button A search result window will pop up as shown in Figure 100 A list of results with your search criteria will be shown at the bottom of the menu eee 121 DS 7600 Series NVR User s Manual 2013 05 27 08 33 35 09 37 16 229 282KB 2013 05 27 09 38 39 09 42 40 14 495KB gt 2013 05 27 09 42 41 10 24 40 179 747KB 2013 05 27 08 51 49 09 37 16 293 701KB gt gt S iD3 2013 05 27 09 42 41 10 07 28 189 739KB iD3 2013 05 27 10 07 28 10 23 27 44 598KB 1 Figure 100 Search Result Window You may now play the selected file by clicking the Play button 8 recorded files can also be exported into a USB storage device To export recorded files connect a USB storage device to the NVR select the recorded files to export and click the Export button 9 Click the Cancel button to exit out of the File Management menu Searching for Event Files Event recorded files can be searched by criteria in the File Management menu To search for all recorded Event files 1 Enter the File Management menu by going to Menu gt File Management Event y w ile Management Event Type Include Cameras Figure 1
47. days in this week If the schedule can also be applied to other days click the Copy button to pop up a Copy to window as shown in Figure 33 Figure 60 Copy Schedule to Other Days Check the corresponding checkbox of the day to copy the record schedule to Click the OK button to save the settings and back to upper level menu or click the Cancel button to back without saving Click the Apply button to save the settings and click OK to exit Draw the schedule Click to select a recording type None means no recording Use the mouse to drag and draw time periods in the assigned area The minimum time unit is hour here Up to 8 discontinuous periods can be for each day Click the Apply button to save the settings or click to exit without saving S Repeat the above steps to set record schedule for other channels If the same schedule can be applied to other channels click the Copy button to pop up a Copy to window as shown in Figure 34 Figure 61 Copy Schedule to Other Channels 64 DS 7600 Series NVR User s Manual 6 Check the corresponding checkbox of other channels to copy the record schedule to 7 Click the OK button to save the setting and back to upper level menu or click the Cancel button to back without saving 8 Click the Apply button to save the settings Note Enable the Start Recording in the Display Menu will also create a schedule in Schedule Configuration It will start all day continue or event reco
48. ddress 4 Subnet Mask IPv4 Default Gateway IPv6 Address 1 IPv6 Address 2 IPv6 Default Gateway Preferred DNS Server Alternate DNS Server Enable DHCP Figure 41 6 Select the HDD tab to enter the HDD Information menu to view the HDD status free apace capacity etc as shown in Figure 15 10 18 0 106 255 255 255 0 10 18 0 254 fe80 c256 e3ff fe02 42a0 64 10 1 7 88 10 17 77 Enabled Network Information Menu 45 DS 7600 Series NVR User s Manual Record Information Storage Modo Figure 42 HDD Information Menu 46 DS 7600 Series NVR User s Manual CHAPTER4 Live Feed 47 DS 7600 Series NVR User s Manual Watching a Live Feed The Live Feed mode is automatically started after the NVR boots up It is also at the very top of the menu hierarchy thus hitting the ESC button multiple times depending on which menu you re on will bring you to the Live Feed mode Understanding Live Feed Icons There are multiple icons on the screen of each channel in Live Feed mode to indicate different camera status and settings These icons include Event Icon Indicates video loss or tampering motion detection and or sensor alarm s Record Icon Indicates the current channel is recording The recording may have been started from a schedule and or triggered from motion or alarm Manual Record Icon Enable disable manual record Instant Playback Icon Instant playback the record in last five minutes
49. e front of the unit to test operation If there is no response Using the mouse go into Menu gt System Configuration gt General gt More Settings Check and remember NVR ID The default IDs is 255 This is valid for all IR controls Press the DEV button on the remote Enter NVR from step 2 GP dil cm 17 DS 7600 Series NVR User s Manual 5 Press the ENTER button on the remote control If there 1s still no response from the remote please check the following l Batteries are installed correctly and the polarities of the batteries are not reversed 2 Batteries are fresh and not out of charge 3 receiver is not obstructed 4 No fluorescent lamp is used nearby Using a USB Mouse A regular 3 button Left Right Scroll wheel USB mouse can also be used with this NVR To use a USB mouse 1 Plug USB mouse into one of the USB ports on the front panel of the NVR 2 The mouse should automatically be detected If in a rare case that the mouse is not detected please refer to the recommended device list from your provider The buttons on the mouse corresponds to 1 Left Button e Single Click Select a component of a menu such as a button or an input field This is similar to pressing the ENTER button on the remote controls e Double Click Switch between single screen and multi screen mode in Preview Playback mode e Click and Drag Clicking and dragging the Left mouse button can be used to control the pa
50. e selected area is part of the motion detection region Dragging or left clicking on areas that overlap the current selected motion detection area will include them into the region You may also click the Full Screen button to include the whole area into the motion detection region Left clicking on any part of the grid will remove that section from the motion detection region 6 If you re not satisfied with the selected region you may click the Clear button to reset the motion detection area 7 Select the actions to take if motion is detected in the designated regions Click the Set button to pop up the Handing menu 95 DS 7600 Series NVR User s Manual Arming Schedule Linkage Action Figure 68 Trigger Channel Settings Menu 1 Select the Trigger Channel tab and check the checkbox of channels which you want the motion detection event to trigger recording Click Apply to save the setting 2 Select the Arming Schedule tab as shown in Figure 69 Choose one day in a week and set an arming schedule If the schedule can also be applied to other days click Copy Click the Apply button to save the settings Iriqger Channel Linkage Action 00 00 00 00 i 10 00 00 00 00 00 0000 00 00 00 00 Cancel Figure 69 Arming Schedule Settings Menu 3 Select the Linkage Action tab as shown in Figure 70 96 DS 7600 Series NVR User s Manual Trigger Channel Arming Schedule Cancel Figure 70 Linkage Action Se
51. eam Settings Menu 4 Select record tab as shown in Figure 29 to configure some parameters of recording Main Stream Substream Camera Camera 01 01 m Figure 56 Record Settings Menu 1 Select the Pre record time The pre record time is the time in seconds to record before a recording is triggered Setting the pre record time to Max will allow the NVR to use up to the maximum available buffer space for recording 2 Select the Post record time The post record time is the time in seconds to also record after a recording has ended 3 Enter the Erase Video After The Erase Video After time denotes the amount of days that files will be deleted after its initial recording Setting the time to 0 will allow the to only delete and overwrite files when the HDD is full 61 DS 7600 Series NVR User s Manual Note The redundant record is to decide whether you want the camera to save the record files or captured pictures in the redundant HDD You must configure the redundant HDD in HDD settings Note You must click the Apply button after adjusting the configuration of each tab before you move on to adjust another one Note Event recordings are recordings that are triggered from motion detection and or from an external alarm Note If an event occurs during Continuous recording the frame rate will automatically switch to that set for Event recording Note For holiday settings you can refer to Page 4
52. ement of the selected camera s Local Manual Operation Local manual operation of the selected camera s Remote Live View Remotely viewing live video of the selected camera s Remote Playback Remotely playing back recorded files of the selected camera s Remote PTZ Control Remotely controlling PTZ movement of the selected camera s Remote Manual Operation Remotely manual operation of the selected camera s 4 Click the Apply button to save the parameters Note If you forget the password of your NVR contact your supplier with the serial number of your NVR to obtain a secure code to reset your NVR Note User settings only appear on the list of System Configuration when login with Administrator accounts Deleting a User To delete a user from the NVR 1 Enter the User menu shown in Figure 52 by going to Menu gt System Configuration gt User 2 Select a user and click to delete 3 Click Yes to confirm the deletion of user or click No to cancel Editing a User To edit a user 88 DS 7600 Series NVR User s Manual Enter the User menu shown in Figure 52 by going to Menu System Configuration User 1 2 Select a user and click to edit user 3 Edit user information including user name password level and MAC address 4 Click the OK button to save and exit Note User password can be both numbers and characters You can click the button the password editable fields to enter charact
53. end the alarm event and exception message to the surveillance center Configuring UPnP Universal Plug and Play UPnP can permits the device seamlessly discover the presence of other network devices on the network and establish functional network services for data sharing communications etc You can use the UPnP function to enable the fast connection of the device to the WAN via a router without port mapping To configure UPnP 1 Select the NAT tab to enter the UPnP settings interface as shown in Figure 50 82 DS 7600 Series NVR User s Manual General DDNS Email SNMP More Settings Enable UPnP Inactive HTTP Port RTSP Port 7 Inactive Server Port 7 Inactive ezviz Access 2 Inactive 7 e7vi7 Access D Inactive Figure 76 UPnP Settings Menu 2 Check the Enable UPnP checkbox 3 Select the Mapped Type There are two types e Auto Automatic mapping port 8000 80 10554 443 e Manual Edit the port by clic 4 Click the Apply button to save the settings Configuring More Settings You can configure alarm host and port by selecting the more setting tab as shown in Figure 51 General Platform Access DDNS Email SNMP More settings Alarm Host Figure 77 More Settings Menu 83 DS 7600 Series NVR User s Manual 1 Alarm Host Send the alarm event or exception message to the alarm host when an alarm is triggered The remote alarm host must have the CMS Client Management System Software
54. er Channel Arming Schedule Linkage Action Comora3 Figure 75 PTZ Linking Settings Menu 8 Ifthe same settings can be applied to other alarm inputs click the Copy button to copy the settings to others 9 Click Apply to save the settings 10 You can check the alarm input status in the Alarm Input Status list on the Alarm Input Interface Configuring Alarm Outputs If the camera supports alarm output there will trigger an alarm output when an alarm is triggered To configure alarm output 99 DS 7600 Series NVR User s Manual 1 Enter the Trigger menu by going to Menu gt Recording Configuration gt Trigger 2 Select the Alarm Output tab as shown in Figure 76 Alarm Input Alarm Output Alarm Output Status 172 6 2397 8000 gt 1 Figure 76 Alarm Output Settings Menu Select the Alarm Output No in the dropdown list Edit the Alarm Name Select the Dwell Time Setup arming schedule for the alarm output by click the Set button Choose one day in a week and set an arming schedule If the schedule can also be applied to other days click Copy Click Apply to save the settings and back to the Alarm Output interface If the same setting can also be applied to other alarm output click Copy Click Apply to save the settings You can check the alarm output status in the Alarm Output Status list in the Alarm Output interface Configuring Exceptions Actions can also
55. erating permissions which includes the limit to access any channel Operation alarm exceptions and information log recording and searching Import and export device configuration information Network self adaptive 10M 100M 1000M network interfaces and 4 or 8 independent PoE network interface are provided is supported TCP IP protocol DHCP DNS DDNS NTP SADP SMTP SNMP UPnP NES and iSCSI are supported TCP UDP and RTP for unicast Auto manual port mapping and automatically discovered by UPnP Remote web browser access by HTTPS ensures high security 10 DS 7600 Series NVR User s Manual Remote search playback download locking and unlocking the record files and downloading files broken transfer resume Remote parameters setup remote import export of device parameters Remote viewing of the device status system logs and alarm status Remote locking and unlocking of control panel and mouse Remote HDD formatting and program upgrading Remote system restart and shutdown Alarm and exception information can be sent to the remote host Remotely start stop recording Remotely start stop alarm output Upgrade by remote FTP server is supported Remote PTZ control Two way voice talk and voice broadcasting Embedded WEB server Support access by Ezviz Development Support SDK for Windows and Linux system Source code of application software for demo Development su
56. ere will pop up an Edit IP Camera menu as shown in Figure 81 Camera 01 192 168 1 10 8000 HIKVISION DS 2C Conn Camera 03 172 6 23 124 8000 HIK VISION DS 2C Conn D IPCamera 03 192 168 1 4 8000 HIK VISION Disc IPCamera 04 192 168 1 5 8000 HIK VISION Disc IPCamera 05 192 168 1 5 8000 HIKVISION Disc Figure 81 Camera List anual 172 6 23 124 I VISION Figure 82 Edit IP Camera Menu 7 Select the Adding Method to Manual 8 Input IP camera address and other necessary information of the camera you want to connect 105 DS 7600 Series NVR User s Manual 9 Input the password and click the Apply button to save the settings Click OK to exit this menu Click Cancel without clicking Apply or OK will back without saving 10 You can click on the camera list anytime you want to configure the added camera 11 If the camera is manually added you can select the camera and click the Advance Set button to pop up an Advance Settings window as shown in Figure 83 Password Maintenance Upgrade 192 168 254 10 Cancel Figure 83 Advance Settings Menu 1 Select the Network tab to modify the IP Camera Address and Configuration Port Click Apply to save the settings Select Password tab to change the password Click Apply to save the settings Select Maintenance tab to reboot or default the selected camera Select Upgrade tab to upgrade IPC using firmware from external storage device Click OK to back to the prev
57. ers Create a Password Key To create a password key which can reset password for admin user 1 Enter the User menu shown in Figure 52 by going to Menu gt System Configuration gt User 2 Click on to enter the password key export menu as shown below Figure 59 Password Key menu 3 Choose the device name and select the dictionary and click on Export button to export password key Switch User On the main menu see in Figure 60 information about users are show on the lower left i 2 User admin to switch users 89 DS 7600 Series NVR User s Manual Playback File Management VCA Search Recording Configuration Cameras Setup System Configuration Maintenance System Information 2 Useradmin Figure 60 Main Menu Reset admin user s password with Password Key If user forgets its admin password he can use the previous created password key to reset its password To reset the password 1 Click the red box area to enter the password recovery menu Figure 61 Main Menu 2 Click on the Password Key button in the menu shown below 90 DS 7600 Series NVR User s Manual 1620131104BBRR42801014 Password Key Figure 62 Main Menu 3 Import the Password Key from external storage device and reset default password Device Name Cancel Figure 63 Main Menu 91 DS 7600 Series NVR User s Manual Configuring PTZ Camer
58. es found on the front panel They include POWER Turn on off NVR Enable Disable Remote Control Switch to the corresponding channel in Live view or PTZ Control mode 3 Alphanumeric Input numbers and characters in Edit mode Switch between different channels in All day Playback mode Delete characters before cursor Check the checkbox and select the ON OFF switch 4 EDIT 15 DS 7600 Series NVR User s Manual Start stop record clipping in playback Adjust focus in the PTZ Control menu It is also used to switch between input methods upper and lowercase alphabet symbols and numeric input Enter the Manual Record setting menu REC In PTZ control settings press the button and then you can call a PTZ preset by pressing Numeric button 5 It is also used to turn audio on off in the Playback mode 7 It is also used to auto scan in the PTZ Control menu INFO Zoom in the PTZ camera in the PTZ Control setting The button is used to enter the All day Playback mode PLAY Switch between main and spot output VOIP In PTZ Control mode it can be used to zoom out the image Press the button will help you return to the Main menu after successful login 0 MENU PTZ Control mode the MENU WIPER button will start wiper if applicable In Playback mode it is used to show hide the control interface Switch between single screen and multi screen mode EPEY In PTZ Control mode it is used to adjust the focus in
59. gure your own settings enter the settings for e Address IP address you would like to use for your NVR e Subnet Mask Subnet Mask of network e Default Gateway IP address of your Gateway Typically the IP address of your router e MTU The valid value range of MTU is 500 9670 6 DNS Server The preferred and alternate Domain Name System DNS Server to be used with your NVR 7 Internal IPv4 Address You need to configure the internal NIC address so that IP addresses are assigned to the cameras connected to the PoE or built in switch interfaces 8 Click the Apply button to save the settings 9 Click the Refresh button to refresh the updated network information after enabling DHCP Configuring DDNS Dynamic DNS allows you to create a hostname and associate it to your IP address making access to your NVR over the internet easier To configure DDNS 1 Select the DDNS tab to enter the DDNS settings interface as shown in Figure 48 General Platform Access Email SNMP NAI More Settings Enable DDNS a Figure 74 DDNS Settings Menu Check the Enable DDNS checkbox Select a DDNS type from the DDNS Type selection dropdown list Five different DDNS types are selectable IPServer DynDNS PeanetHull NO IP HiDDNS PServer Enter Server Address for IPServer DynDNS 1 Enter Server Address for DynDNS 2 Enter the domain obtained from the DynDNS website in the Domain Name textbox 3 Enter the User Name and Password registe
60. h for turning on off the device Network interfaces with Network interface for the cameras and to provide power over PoE function Ethernet 12 DS 7600 Series NVR User s Manual Alarm In Out Alarm Input Output Interface Note The rear panel of 7616NI E2 16P provides 16 independent 100 Mbps PoE network interfaces Product Application Diagram IR Remote Audio Input USB Device Dome Figure 4 Product Application Diagram Note DS 7604NI E1 4P DS 7608NI E2 8P and DS 7616NI E2 16P can only connect network cameras 13 Operating Your NVR There are numerous ways to navigate and operate your NVR You may use the Front Panel the IR Infrared Remote a Mouse and the Soft Keyboard Front Panel The following figure shows the front panel of NVR E OPOWER OSTATUS OTx Rx Figure 3 NVR Front Panel The items on the front panel include 1 Status Indicators e Power Power indicator turns yellow when system is running e Status Status indicator blinks red when data is being read from or written to HDD Tx Rx Tx Rx indictor blinks yellow when network connection is functioning properly 2 USB Ports Connects USB mouse or USB flash memory devices 14 DS 7600 Series NVR User s Manual IR Remote Control Operations The NVR may also be controlled with the included IR remote control shown in Figure 5 Figure 4 Remote Control The keys on the remote control closely resemble the on
61. he camera bit rate type include Variable and Constant Select the recording Frame Rate to use for the designated camera A rate of 30 Full Frame all the way down to 1 16 of a frame can be selected Set the video quality using the Video Quality slider Increasing the video quality will also increase the max bit rate recommended The max bit rate can be adjusted according to this recommend Select the max bit rate mode in the Max Bitrate Mode dropdown menu The options for the camera max bit rate mode include General and Customize 32 16384kbps 60 DS 7600 Series NVR User s Manual 9 Check the checkbox of record audio to enable or disable audio while recording If the selected camera does not support audio the checkbox will not be editable 10 Select the Video Stream option to choose use mainstream or substream to record 11 Click the Apply button to save the settings 12 Repeat the steps to set other cameras Note The parameters of event recording cannot be configured and they are as same as the ones of continuous recording Note The remaining time that installed HDDs are capable of recording based on current record parameter is shown in the tab of estimated time of recording 3 Select Substream tab as shown in Figure 28 to configure the parameters of sub stream The steps are the same as main stream configuration Main Stream Record Camera 01 D9 T 352 240 CIF Camera 12fps Figure 55 Substr
62. he presets you would like to have on the patrol Click the Up and Down button at the bottom of the list to change the order of the presets in the patrol To test out your new preset click the Play and Stop button shown PTZ should move through the list of added presets and end the patrol when you click Stop 94 DS 7600 Series NVR User s Manual Configuring Alarms and Exceptions Setting up Motion Detection Set up properly using motion detected recording will increase the number of days your NVR is able to record It will only record relevant events rather than everything which will also make searching for events easier To set up motion detection 1 Enter the Motion Detection menu shown in Figure 67 by going to Menu gt Recording Configuration Motion Detection Camera amera 01 D1 Y Zone Setting Figure 67 Motion Detection Settings Menu 2 Select the camera to configure in the camera dropdown list 3 Check the Enable Motion Detection checkbox to enable motion detection for the selected camera Uncheck the checkbox to disable motion detection 4 Setthe motion detection sensitivity by adjusting the green Sensitivity bar The more lime green rectangles selected in the bar the higher the sensitivity will be to motion 5 Setthe motion detection region in the preview screen on the right side of the menu by left clicking with the mouse on an open area A red grid will be shown designating that th
63. hown Click the OK button once backup has completed Figure 57 Export Finished Message Click the Cancel button to return to the File Management menu 10 You can also click Quick Export in the Record menu to export all the record files for the selected channel 78 DS 7600 Series NVR User s Manual CHAPTERS System Configuration 79 DS 7600 Series NVR User s Manual Configuring Network Settings Network settings must be configured before you re able to use your NVR over the network Configuring General Settings To configure network general settings 1 Enter the Network Configuration menu shown in Figure 46 by going to Menu System Configuration Network Plaltorm Access DDNS SNMP NAT More Settings e80 See 7 481 fe 7b 81 48 7b 8121 Figure 72 Network Settings Menu 2 Select the General tab The current network settings are displayed on the right side of the menu shown in Figure 47 10M 100M 1000M e80 8ee 7 A8ff fe 7b 81 5 192 168 254 1 Figure 73 General Network Settings Menu 80 DS 7600 Series NVR User s Manual 3 NIC Type Set the NIC type of the device General it is default as 10M 100M 1000M self adaptive 4 If you have a DHCP server running and would like your NVR to automatically obtain an IP address and other network settings from that server check the Enable DHCP checkbox 5 If you would like to confi
64. icator colors can vary by activation process model number and device type 21 DS 7600 Series NVR User s Manual Figure 7 Risky Inadequate Strength Password Rseessess Invalid Password Figure 8 Invalid Password Message NOTE The password strength is shown with a color indicator Figure 9 Weak Adequate Password Strength 22 DS 7600 Series NVR User s Manual Figure 10 Fair Adequate Password Strength NOTE The password strength is shown with a color indicator Figure 11 Strong Password Strength 3 After an acceptable password has been created a confirmation message will appear on the screen Figure 7 4 Press the OK button to proceed Figure 12 Activation Confirmation Message 23 DS 7600 Series NVR User s Manual SADP Software Activation v2 2 3 5 or higher 1 2 Launch the new version of the SADP software v2 2 3 5 The software will display all Hikvision devices on the network Anew field called Security will display whether the DVR NVR is active or not Figure 8 If the DVR NVR is Inactive highlight the DVR NVR and enter a new password into the New Password field on the bottom right of the screen Figure 8 See Password Strength Levels table on page 37 for guidelines The password strength will be displayed accompanied by a color indicator e Level 0 Hisky no indicator Not acceptable Level 1 Weak pink indicator Acce
65. ideo It is VGA HDMI adaptable e Full Screen Monitoring Dwell Time Set the time to dwell between switching of channels when events occur Setting Camera Order Setting the camera order allows you to logically position cameras for more efficient monitoring of your own individual location 57 DS 7600 Series NVR User s Manual General Video Oulpul Interface D1 172 6 23 10 01 D2 Camera 01 D3 Camera 03 D4 04 05 05 06 D 07 08 08 Figure 53 Camera Order Settings Menu To set the camera order 1 Note Enter the View menu shown in Figure 26 by going to Menu System Configuration Live View View Select the Screen Configuration you would like to use in Live Feed by 20604 The preview of the screen configuration on the right will change depending on the option selected Click to select a screen in the right region and double click to select a channel in the left region Thus the selected channel will be displayed in the corresponding screen X x means no channel will be displayed in this screen Click to start live view of all channels and click to stop live view all channels Click ra or to go to the previous or next page For example in 2x2 screen configuration mode pressing the Next button will bring up the next set of 4 displays Click the 1 button to save the settings
66. in Figure 105 by going to Menu gt Maintenance gt Import Export Connect the USB storage device to a USB port on the NVR Click the Refresh button The contents of the USB storage device will be shown on the screen Select the configuration file The configuration file is named devCfg bin Click the Import button In the pop up window click Yes to confirm the import and the system will automatically reboot to make it effective 129 DS 7600 Series NVR User s Manual Viewing System Logs Many events of your NVR are logged into the system logs To access the system logs and search for these events 1 Enter the System Logs menu shown in Figure 106 by going to Menu gt Maintenance gt System Logs lt gt Log Export 2014 10 30 00000 20141020 235959 2 Alarm Output Start Motion Detection Tum T Figure 106 System Logs Menu 2 Select the Start Time and the End Time 3 Select the Major Type from the dropdown list Four major types are available Alarm Exception Operation and Information You can also select 4 Select the Minor Type under the Major Type to efficiently find the logs 5 Click the Search button The search results will be displayed in a list Figure 107 Click to page up and down Note Up to 2000 log files can be displayed each time 130 DS 7600 Series NVR User s Manual oystem Maintenance ch Log Export Operation 2
67. installed e Enter the IP address of the remote PC on which the CMS Software is installed in e Enter the alarm monitoring port in Alarm Host Port which must be the same as the port configured in the software 2 Port e Server Port Enter the Server Port which designates the port to be used with the client software e HTTP Port Enter the HTTP Port which refers to the one to be used with the built in Web Server e Multicast IP Enter the Multicast IP to enable multicast RTSP Port Enter the PTSP Port PTSP is a network control protocol designed for use in entertainment and communication systems to control streaming media servers 3 Enable Virtual Host You can enable the virtual host function based on your need Click Apply to save the network settings and click to return to previous menu Click without clicking Apply will quit out of the menu without saving settings Note If you enable the high speed download function the local menu operation will be affected It 1s recommended to disable this function after finishing the remote downloading of record files Managing User Accounts By default your NVR comes with one user account the Administrator account The Administrator user name is admin and the password 15 12345 The default password for Administrator should be changed right away for security reasons The Administrator has the authority to add delete or configure parameters for many of the system functions Ch
68. ious menu se If the camera status turns Disconnected to Connected you can click gt to get the live view of the camera Note Support third party IP camera PANASONIC SONY AXIS SANYO BOSCH and ACTI 106 DS 7600 Series NVR User s Manual Configuring Privacy Mask Privacy Mask can be setup to mask off sensitive or private areas in the field of view of a camera To configure privacy zones 1 Enter the Privacy Mask menu shown in Figure 84 by going to Menu gt Cameras Setup gt Privacy Mask R Zone Setting Figure 84 Privacy Mask Settings Menu 2 Select the camera to setup privacy mask in using the camera dropdown list on the upper left of the menu 3 Click Enable Privacy Mask checkbox to enable privacy mask 4 Upto four privacy masks can be used per camera and are shown using four different colors yellow green blue and grey Using the mouse click and drag out rectangular boxes defining the desired zones 5 You may clear a privacy zone at any time by clicking on the corresponding Clear Zone button or Clear button to clear all zones 6 Select the Apply button to save the privacy mask settings and select ia to return to the previous menu Selecting without clicking Apply will quit out of the menu without saving settings Configuring Tamper proof Tamper proof detection can be used to recognize if an area of a camera 15 purposely covered and to respond accordingly To configure tamper proof
69. is Inactive highlight the DVR NVR and press the Activate button Figure 16 to display the Activation window Figure 17 Enter a new password into the Password field Figure 17 See Password otrength Levels table on page 37 for guidelines The password strength will be displayed accompanied by a color indicator e Level 0 Risky no indicator Not acceptable Level 1 Weak pink indicator Acceptable Level 2 Medium yellow indicator Acceptable e Level 3 Strong green indicator Acceptable Bar length indicates strength level Activation will be allowed if the password is of acceptable strength Figures 19 20 and 21 If the password is of unacceptable strength Risky Figure 17 warning box will be displayed Figure 18 explaining the requirements for an acceptable password Retype the password into the Confirm Password field After the password has been entered and confirmed press the OK button The DVR S NVRS s status will change to Active Figure 19 29 DS 7600 Series NVR User s Manual File System View Tool Help Control Panel Device Management Device Management nd deleting the Account Management dd users and assigning 18 Data and Statistics File System View Tool Help Control Panel Device Management Server wl Group Organization Device for Management 0 Encoding Device 02 Add Device Modify Delete Remote Co CA All
70. k the Apply button to save the settings Click OK to back to the previous menu 6 Click the Apply button on the interface to save the settings Configuring OSD Settings On Screen Display OSD settings can be configured in the OSD menu The OSD is shown in each display in Live Feed and Playback mode To configure OSD settings 1 Enter OSD menu shown in Figure 87 by going to Menu gt Cameras Setup gt OSD 110 DS 7600 Series NVR User s Manual amera 01 D1 amera 01 M DD YYYY 24 hour d on Transparent amp Not Figure 87 OSD Configuration Menu 2 Select the camera to setup OSD configuration in using the camera dropdown list 3 Configure OSD settings including Camera Name Name of selected camera Display Name Enable to display camera name in Live Feed Display Date Enable to display date in Live Feed Date Format Format of date Time Format Format of time Display Mode Display style for OSD 4 Using the mouse click and drag OSD elements on preview screen to desired location 5 Select the p button to save these settings and select to return to previous menu Selecting without clicking Apply will quit out of the menu without saving settings 111 DS 7600 Series NVR User s Manual CHAPTER 10 Disk Management 112 DS 7600 Series NVR User s Manual Managing Disks Checking Disk Status The status of all installed hard disk drives HDD and Network ha
71. le the Alarm Output list where the output to trigger can be selected 4 Select the Apply button to save the exception settings and select to return to the previous menu Selecting without clicking Apply will quit out of the menu without saving settings Configuring Email Settings If you would like to have the NVR send out emails when certain events are detected or exceptions have been triggered you must first setup the email settings To setup email settings 1 Enter the Email Configuration menu by going to Menu gt System Configuration gt Network 101 DS 7600 Series NVR User s Manual 2 Select the Email tab as shown in Figure 78 General DDNS SNMP NAT More Settings Enable Server Authent SMTP Receiver Enable Attached Picture 4 Enable Email Interval Figure 78 Email Configuration Menu 3 In this tab enter all pertinent email information including Enable Server Authentication Enable if email server requires authentication Enabling Server Authenticating will enable the User Name and Password fields User Name User name to use for server authentication Password Password to use for server authentication SMTP Server Address for SMTP server SMTP Port Port for SMTP server Enable SSL Enable Secure Sockets Layer SSL for out going email Sender Name The sender name to use when an email is sent out from the NVR Sender s Address The sender s address to use when an email is
72. licking DEA without clicking the Apply button will exit the menu without saving Checking the Status of Your NVR The current status of your NVR can be checked at anytime by going to the System Information menu The System Information menu can be accessed by going to Menu gt System Information Figure 37 System Information Menu 1 Select the Device Info tab to enter the Device Information menu to view the device name model serial No firmware version encode version and ezviz verification code as shown in Figure 10 2 Select the Camera tab to enter the Camera Information menu to view the status of each camera as shown in Figure 11 43 DS 7600 Series NVR User s Manual Figure 38 Camera Information Menu 3 Select the Record tab to enter the Record Information menu to view the recording status and encoding parameters of each camera as shown in Figure 12 Figure 39 Record Information Menu 4 Select the Alarm tab to enter the Alarm Information menu to view the alarm information as shown in Figure 13 44 DS 7600 Series NVR User s Manual B TS System Information Local lt 1 Local lt 2 lt 3 Local 4 Local 1 Used Not used Not used Not used Not supported Used Figure 40 Alarm Information Menu 5 Select the Network tab to enter the Network Information menu to view the network information as shown in Figure 14 RT system Information 4 A
73. ls are configurable Double Click Speed Set the speed of mouse double clicking and 3 levels are configurable Enable Password Enable or disable the password of live view screensaver Enable HDMI Resolution Auto Enable or disable the auto adjust of HDMI resolution 2 Set device name device no and auto lock time by going to Menu gt System Configuration gt General More Settings as shown in Figure 24 Time Date Display IDMIPVGA Figure 51 More Settings Menu 56 DS 7600 Series NVR User s Manual The settings available to configure in this menu include Device Name Edit the name of the device Device No Edit the number of the device e Auto Locktime Set the auto lock time of menu e Menu Output Mode The menu output mode is HDMI VGA adaptable 3 Setthe live view interface parameters and event output by going to Menu System Configuration Live View General as shown in Figure 25 View Video Output Interface Figure 52 Live View Menu The settings available to configure for each video output include e Video Output Interface The video output interface is VGA HDMI adaptable e Live View Mode Designates the display mode for Live Preview Dwell Time Set the time to dwell between switching of channels when Start Auto switch is selected in Live Preview e Enable Audio Output Enable or disable audio output for the selected video output e Event Output Designates the output to show event v
74. meet minimum requirements NOTE The password strength is shown with a color indicator 26 DS 7600 Series NVR User s Manual Total number of online devices 3 Save as Excel Refresh ID Device Type 4 Address Security Software Version IPv4 Gateway 001 DS 2CD4A35F 192 168 1 64 Inactive V530build 150417 19216811 DS 7608NI SE 10 102 102210 Active V2 3 10build 141128 10 102 102 1 DS 6704HFI 10 102 102 209 Active V1205uild 140414 10102 102 1 Figure 17 Password Field with Medium Strength Password Online Devices T Help e Total number of online devices 4 7 Save as Excel Refresh Device Type IPv4 Address Security Software Version IPv4 Gateway DS 2CD4A35F 192 168 1 64 Inactive V5 3 0build 150417 192 168 1 1 DS 2CD2132F 192 168 1 64 Active V5 3 0build 150327 192 168 1 1 DS 6704HFI 10 102 102 209 Active V1 2 0build 140414 10 102 102 1 DS 7608NI SE 10 102 102 210 V2 3 10build 141128 10 102 102 1 Figure 18 Password Field with Strong Strength Bar Modify Network Parameters IP Address 192 168 1 64 Port 8000 Subnet Mask 255 255 255 0 IPv4 Gateway 192 168 1 1 IPv6 Address Gateway IPV6 Prefix Length HTTP Port Device Serial No DS 2CD4A35FWD 12HS20 Enable DHCP Device Activation New Password Medum Confirm Password CETT Modify Network Parameters IP Address 192 168 1 64 Port 8000 Subnet Mask 255 255 255 0 IPv4 Gateway 192 168 1
75. n check the checkbox of the Continue to use this disk when self evaluation is failed item Bad Sector Detection 1 Enter the Bad Sector Detection menu by going to Menu gt System Maintenance gt HDD Detect 2 Select the Bad Sector Detection tab as shown in Figure 98 119 DS 7600 Series NVR User s Manual 5 Settings HDD No ull Detection E 1 863GB 465MB ot tested Figure 98 Bad Sector Detection Interface Select the HDD you want to configure in the dropdown list Choose Full Detection or Key Area Detection Click the Detect button to start the detection Click the Pause Cancel button to pause cancel at any time you want If the HDD is normal you see the green color icon on the screen while red means damaged and yellow means shield 8 Click the Error Info to see the detail damage or shield information ee es 120 DS 7600 Series NVR User s Manual Managing Files Searching for Recorded Files Previously recorded files can be searched by criteria in the File Management menu To search for all recorded files 1 Enter File Management menu shown in Figure 99 by going to Menu gt File Management Record Include Cameras 52 a4 Start End time of record 2013 02 28 03 30 18 2013 05 20 18 01 53 sl Aid 2013 05 20 00 00 00 L4 2013 05 20 23 59 59 Figure 99 File Search Menu Select the cameras that you would like to include in the search If you woul
76. n tilt of a PTZ camera as well as to vary the position of digital zoom area and camera OSD It can also be used to set the alarm areas 2 Right Button e Single Click Shows pop up menu in preview interface Exit to return to the previous menu Using the Soft Keyboard When a mouse is used to perform task on the NVR clicking on a text input field will bring up the Soft Keyboard shown in Figure 6 ESC mW 7 OF 707 le Tu d 7 7 my Pee dd 4 Space enter Figure 5 Soft Keyboard The buttons on the soft keyboard represents Switch to Uppercase Switch to uppercase input Switch to Lowercase Switch to lowercase input 18 DS 7600 Series NVR User s Manual Symbols Switch to symbols input Enter Confirm selection ESC Exit Soft Keyboard Backspace Delete the character in front of the cursor 19 DS 7600 Series NVR User s Manual 2 Activating Your DVR To ensure the highest level of protection Hikvision has launched a login procedure that requires users to create a new password for the admin account upon the first login to all devices The password must contain 8 to 16 characters combining numbers lowercase letters uppercase letters and special characters At least two types of the above mentioned characters are required to activate the device The system will check the password strength Risky passwords will n
77. nagement Server wl Group Organization Device for Management 0 Encoding Device o Add Device Modify Delete Remote Co VCA Allocation 5 QR Code Activate Refresh Filter Add New Device Type Nickname Device Serial No Security Resource Usa HDD Statu Online Device 3 gt Refresh Every 155 4 Addto Client AddAll Di Modify Netinfo Reset Password Activate Filter 192 168 1 64 DS 2CD4A35FWD IZHS V5 3 0build 150417 Encoding device DVR DVS NVR IPC IPD iVMS 4200 10 102 102 210 DS 7608NI SE 8P V2 3 10build 141128 Active 8000 2015 04 09 09 08 59 Nc PCNVR IVMS 4200 EncodeCard x server 10 102 102 209 DS 6704HFI V1 2 0build 140414 Active 8000 2015 05 05 10 28 01 4 ie Noe mail account is configured and all the sending operations are stopped Li m a NVR Status Active Figure 27 Active DVR NVR Status 33 DS 7600 Series NVR User s Manual e Web Interface Activation use if the SADP or iVMS 4200 software do not support the activation procedure 1 In a Web browser i e Internet Explorer Chrome Safari type the DVR S NVR s IP address and press Enter The Activation Window will appear instead of the login page Figure 23 Enter new password into the Password field see Password Strength Levels table on page 38 for guidelines The password strength will be displayed accompanied by a color indicator e Level 0 Hisky no indicator N
78. nditions This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation EU Conformity Statement This product and if applicable supplied accessories too are marked with CE and comply therefore with applicable harmonized European standards listed under the Low Voltage Directive 2006 95 EC the EMC Directive 2004 108 EC the RoHS Directive 201 1 65 EU 2012 19 EU WEEE directive Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union For proper recycling return this product to your local supplier upon the purchase of equivalent new equipment or dispose of it at designated collection points For more information see www recyclethis info 2006 66 EC battery directive This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union See the product documentation for specific battery information The battery is marked with this symbol which may include lettering to indicate cadmium Cd lead Pb or mercury Hg For proper recycling return the battery to your supplier or to a designated collection point For more information see www recyclethis info Industry Canada ICES 003 Compliance This device meets the CAN ICES 3 A NMB 3 A standards requirements DS 7600 Series NVR User s Manual Preventive and Cautionary Tips
79. nt 75 DS 7600 Series NVR User s Manual Click START CLIPPING Select the ending time of the incident Click END CLIPPING Same button as Start Clipping Repeat steps 1 7 as many times as required Click EXIT or right click Click YES to save clipping LM Note The Start button is not available when there is still a video clip that has not been saved or cleared Altention After pressing YES a new window pops up containing all saved clips File Management Video Clips Locked File Tag 2015 06 30 08 33 01 08 33 02 1319 26 2015 05 30 09 39 38 09 39 40 133 758KB Select the desired clipse If selected multiple clips created from EXPORT THE the same camera CLIPS TO USB will be stitched DEVICE together T Figure 70 Clips Export Interface 1 Select the desired clips 2 Press EXPORT 76 DS 7600 Series NVR User s Manual 3 After the backup is complete simply remove the USB FLASH Drive or the USB HDD ISE 1 m Folder 2012 12 27 14 59 20 10 758MB Figure 71 Export Interface 4 Ifthe available space on the storage device is adequate select the Export button to begin backup of the selected clips 5 After clips have been backed up you may click the Cancel button to return to the Playback Interface Note If the USB storage device has not been properly initialized and formatted you may click on the Format button to do so Formatting a sto
80. ntrol buttons Zoom Focus Iris the speed of the PTZ movement test the functionality of the PTZ camera If PTZ camera and protocol supports it you may also click the Auto Scan button to test its function PTZ controls buttons are shown in Figure 66 Direction Buttons Auto Sca Zoom Focus Iris Speed Figure66 PTZ Controls Button 5 If PTZ camera is not working properly make sure PTZ is connected and configured with the correct settings under the General tab Customizing PTZ Presets Patterns and Patrols Your NVR allows you to customize presets patterns and patrols for a connected PTZ camera Please make sure that the presets patrols and patterns should be supported by PTZ protocols A PTZ camera must first be configured before PTZ presets patterns and patrols can be customized See Configuring Basic PTZ Settings To customize PTZ presets 1 Enter the PTZ menu by going to Menu gt Cameras Setup gt PTZ 2 Select the More Settings tab as shown in Figure 65 3 Select Save Preset and move the camera to the desired position using the PTZ control buttons 4 Double click on a preset number The current position of the PTZ camera will be set for the selected preset number 93 DS 7600 Series NVR User s Manual 5 Totest the newly configured preset first move the PTZ camera to a different position Select Recall Preset and click on the preset number The camera should move to the location that was set for
81. ocatior Add New Device Type Nickname gt Online Device 3 Client Add All Device Type ie 9 No e mail account is configured and all the sending operations are stopped iVMS 4200 Main View 2222224 Remote Playback iewing live video controlling PTZ eer Se ing the record files and functionality and setting image playback Event Management gt ption actions for Log Search Se viewing id backing up People Counting Heat Map Displaying the hea istics wae Di ing the people counting 1 5 4200 Device Serial No gt Refresh Every 15s DS 2CD4A35FWD IZHS V5 3 0build 150417 Encoding device DVR DVS NVR IPC IPD iVMS 4200 10 102 102 209 DS 6704HFI PCNVR IVMS 4200 EncodeCard server 10 102 102 210 DS 7608NI SE 8P V1 2 0build 140414 V2 3 10build 141128 1 No e mail account is configured and all the sending operations are stopped Figure 21 Inactive DVR NVR Status E map Adding modifying deleting and basic operations of E map ora Storage Schedule DIG age schedule and System Configuration Configuring general parameters m Counting Displaying the counting statistics admin 8 amp 134525 8 n QR Code Activate 4 Refresh All Filter Security Resource Usa HDD Statu Activate 2015 04 09 09 00 59 NVR Status Inactive 30 DS 7600 Series NVR User s Manual File Sys
82. ot acceptable Level 1 Weak pink indicator Acceptable Level 2 Medium yellow indicator Acceptable e Level 3 Strong green indicator Acceptable Bar length indicates strength level Figure 24 Activation will be allowed if the password is of acceptable strength Figures 26 27 28 A white checkmark will appear in a green circle to the right of the password field If the password is unacceptable strength Risky Figure 24 a white X will appear in a red circle to the right of the password field and a warning dialog box will be displayed Figure 25 explaining the requirements for an acceptable password Press the OK button After a successful activation the user will be logged in to the DVR S NVR s live view page 34 DS 7600 Series NVR User s Manual Valid password range 8 16 You can use a combination of numbers owercase uppercase and special character f or your password with at least two kinds of th em contained GHikvision Digital Technology Co Ltd All Rights Reserved iVMS 4200 Device Management Bee Activation Activate Filter Security Res urce U HDD St Valid password Mars can use a combination 0 numbers lowercase uppercas and special character for your password with at least two kinds of them contained OK Cancel The Strength Meter does not light up Add to
83. ot be accepted Device Firmware with Secure Activation Value Series IP Camera DS 2CD2xxx V5 3 0 Smart Series IP Camera DS 2CD4xxx V5 3 0 NVR Hybrid DS 9016HWI ST V3 1 5 DS 96xxNI ST DS 7716NI SP 16 Plug n Play NVR DS 76xxNI EI E2 P V3 1 0 Turbo DVR DS 72xxHGHI SH V3 1 6 DS 73xxHQHI SH Super NVR DS 96128NI E24 H TBD DS 96256NI E24 H NOTE DVRs NVRs starting with the latest firmware see chart above WILL NO LONGER HAVE A DEFAULT PASSWORD The user must activate the NVR by creating a password for the admin account which can be done in one of four ways Local Activation 1 Power on the DVR NVR activation message will appear on the screen prompting the user to activate the device Figure 1 username field will be greyed out with the username set to admin 2 Type in a password of your choosing see Password Strength Levels table on page 37 for guidelines 20 DS 7600 Series NVR User s Manual The password strength will be displayed accompanied by a color indicator e Level 0 Hisky red indicator Not acceptable e Level 1 Weak red indicator Acceptable Level 2 Fair orange indicator Acceptable e Level 3 Strong blue indicator Acceptable Activation will not be allowed unless the password is of acceptable strength Figures 4 5 and 6 3 Retype the password into the Confirm Password field Figure 6 Activation Window NOTE strength level ind
84. ple There may have subtle differences between different models 41 DS 7600 Series NVR User s Manual Setting Date amp Time It 15 extremely important to setup the system date and time to accurately timestamp recordings and events Steps 1 Enter the System Configuration menu by going to Menu gt System Configuration gt General 2 Select the Time Date tab as shown in Figure 8 Display More Settings limefDate Time Zone GMT 08 00 Beijing Chon Enable NTP a Figure 35 System Configuration Menu 3 The current system time and date as well as the time zone will be displayed Using the directional buttons on the remote or the mouse selects the correct date time and time zone 4 To enable Daylight Savings Time 1 2 3 4 Select a time zone that supports DST Check the Enable DST checkbox and click Customize button to pop up the DST Setting menu as shown in Figure 9 You can check the Auto DST Adjusting checkbox or manually check the date of the DST period Click the Apply button to confirm the settings Click OK to return to the upper level menu Auto DST Adjustment Figure 36 DST Settings Menu 42 DS 7600 Series NVR User s Manual 5 To acquire the time and date over an NTP Network Time Protocol Server check the Enable NTP checkbox You can set the interval and enter your own NTP server 6 Click the Apply button to save the settings and click to exit out of the menu C
85. pport and training for application system Rear Panel AUDIO IN 00000000 ALARM o f ooooo 4 ooo 100000 VGA Homi 10 5 6 3 7 Figure 2 DS 7604NI E1 4P Rear Panel 1 Power Supply 48VDC power supply Audio IN RCA connector for voice talk input HDMI Interface HDMI video output connector LAN Network Interface LAN Network interface to communicate Audio OUT RCA connector for audio E VGA Interface DB9 connector for VGA output 936 local video output and menu 11 DS 7600 Series NVR User s Manual Universal Serial Bus USB ports for additional devices such as USB mouse and USB Hard Disk Drive HDD USB Interface Ground needs to be connected when NVR starts up Power Switch Switch for turning on off the device Network interfaces with Network interface for the cameras and to provide power over PoE function Ethernet Alarm In Out Alarm Input Output Interface 10 5 6 3 y Figure 3 DS 7608NI E2 8P amp DS 7616NI E2 16P Rear Panel pen 2 HDMI video opat cometon ULL EZ B pem RCA connector for audio VGA Interface DB connector for VGA output local video output and menu Universal Serial Bus USB ports for additional devices such USB Interface as USB mouse and USB Hard Disk Drive HDD Ground needs to be connected when starts up Power Switch Switc
86. ptable Level 2 Medium yellow indicator Acceptable e Level 3 Strong green indicator Acceptable Bar length indicates strength level Activation will not be allowed unless the password is of acceptable strength Figures 11 12 and 13 If the password is unacceptable strength Risky Figure 9 a warning box will be displayed Figure 10 Retype the password into the Confirm Password field After the password has been entered and confirmed press the OK button to display the pop up confirmation window Figure 14 Press the X the top right corner of the pop up confirmation window to dismiss the window 24 DS 7600 Series NVR User s Manual e Online Devices Help 2 Total number of online devices 3 Save as Excel d amp Refresh Modify Network Parameters ID Device Type IPv4 Address Security Software Version IPv4 Gateway secet 192 168 1 64 001 DS 2CD4A35F 192 168 164 Inactive V5 30build 150417 192 168 1 1 Port 8000 002 DS 7608NI SE 10 102 102 Active V2 3 10build 141128 40 102 102 Subnet Mask 255 255 255 0 003 DS 6704HFl 102 102 Active V4 20build 140414 10 102 102 1 IPv4 Gateway 192 168 1 1 IPv6 Address IPv6 Gateway IPv6 Prefix Length 0 HTTP Port 80 Device Serial No DS 2CD4A35FWD IZHS20 Enable DHCP Password Device Activation New Password Confirm Password Figure 13 Security Field SADP Online Devices 1 Help Total number
87. r be overwritten until they are unlocked 124 DS 7600 Series NVR User s Manual CHAPTER11 NVR Management 125 DS 7600 Series NVR User s Manual Managing System Upgrading the System Firmware The system firmware for your NVR can be updated from a USB storage device or FTP To update the system firmware from a USB storage device 1 Enter the Upgrade menu by going to Menu gt Maintenance gt Upgrade 2 Select the Local Upgrade tab as shown in Figure 102 gt FTP Upgrade Upgrade Figure 102 Local Upgrade Menu Connect the USB storage device to a USB port on the NVR Click the Refresh button The contents of the USB storage device will be shown on the screen Select the firmware file The firmware file is named digicap dav Click the Upgrade button to upgrade the NVR The NVR will automatically reboot after the upgrade is completed If you do not wish to upgrade at this point click the Cancel button To update the system firmware from 1 Enter the Upgrade menu by going to Menu gt Maintenance gt Upgrade 2 Select the FTP Upgrade tab as shown in Figure 103 126 DS 7600 Series NVR User s Manual System Maintenance Local Upgrade Figure 103 FTP Upgrade Menu 3 Enter the FTP Server Address 4 Click the Upgrade button to upgrade the NVR The NVR will automatically reboot after the upgrade is completed Restoring Default Settings To restore factory default settings to your NVR
88. rage device will permanently delete ALL the files on that device There is also NO WARNING MESSAGE after clicking the Format button to format the storage device Please proceed with caution and backup all critical data from the storage device before formatting 77 DS 7600 Series NVR User s Manual Backing up Recorded Files Not only can video clips be backed up full recorded files can also be backed up to a storage medium To back up recorded files l 2 2 9 Search for recorded files using the File Management menu See Searching for Recorded Files Page 50 Select the files you would like to back up by checking the box next to the file You may also check the Channel No box to select all files The total required space will be shown next to Total size You can also check the checkbox of Merge files to export Click the Export button this will take you to the Export menu same with Figure 45 In the Export menu connect a USB storage device and click the Refresh button If the device is detected a list of its file contents as well as the available free space will be shown You may delete files on the USB storage device to free up additional storage space by clicking the Delete button on the selected file You may also format the device by clicking the Format button Formatting will remove ALL files from the device When there is sufficient storage space for backup click the Export button A backup progress bar will be s
89. rd drives can be checked under the HDD menu To check the status of installed disks 1 Enter the HDD menu shown in Figure 88 by going to Menu gt System Configuration gt HDD Record Information Storage Mode a 1 863GB Normal Local 1 7606 1 Figure 88 HDD Information 2 Select the HDD Information tab to check the disk status capacity property type free space and estimated time of recording in day s Note For the HDD Detect please refer to Page 95 Setting Network HDD Add the allocated NVR Storage Space of NAS or disk of IP SAN to NVR this part will work as network HDD To set a network HDD 1 Enter the HDD menu by going to Menu gt System Configuration gt HDD 2 Click the Add NetHDD button to pop up the Add NetHDD menu as shown in Figure 89 113 DS 7600 Series NVR User s Manual elHDD 1 172 10 14 10 Idvrixdan ideri Figure 89 Add NetHDD Menu 3 Select the number and the type of network hard drive Then enter in the IP address and the directory of network hard drives 4 If you do not know the directory of network hard drives you can click Search after you enter the IP address The network hard drives in this subnet will be listed below Select the one you want to add 5 Click OK to save the settings and return the pervious menu The added hard drives will appear on the list of HDDs 6 Youcan edit or delete the network hard dri
90. rding for all channels 65 DS 7600 Series NVR User s Manual Configuring Holiday Settings You may want to have different plan for recording on holiday Follow the steps to configure the holiday settings Steps 1 Enter the Holiday menu shown in Figure 35 by going to Menu gt Recording Configuration gt Holiday Holiday Holiday3 Holidays Holidays Holiday6 Holiday f Holidays Holidays 10 11 Holidav12 Figure 62 Holiday Settings Menu Disabled 1 Jan Disabled 1 Jan Disabled 1 Jan Disabled 1 Jan Disabled 1 Jan Disabled 1 Jan Disabled Disabled 1 Disabled 1 Jan Disabled 1 Jan Disabled 1 Jan 2 Choose holiday List show on the right Click to pop up an Edit menu as shown in 3 Edit the Holiday Name or use the default one Figure 36 Figure 63 Edit Holiday Recording Configuration Menu 4 Check the Enable checkbox Cancel 66 DS 7600 Series NVR User s Manual 5 Select Mode in the dropdown list There are three different modes for the date format to configure holiday schedule 6 Setthe start and end date 7 Click the Apply button to save settings and click OK to exit 67 DS 7600 Series NVR User s Manual CHAPTER6 Playback DS 7600 Series NVR User s Manual Playing Back a Recording Previously recorded files can be played back using the Playback Interface You must first search for recordings to pl
91. rding schedule configuration Continues and event video encoding parameters 8 recording periods with separated recording types configurable Pre record and post record for alarm motion detection for recording and pre record time for schedule Searching record files and captured pictures by events alarm input motion detection VCA Customization tags searching and playing back by tags Locking and unlocking record files Searching and playing back record files by channel number recording type start time end time etc Zooming in when playback Reverse playback for multi channel Supports pause speed up speed down skip forward and skip backward when playback locating by dragging the mouse Up to 16 ch synchronous playback at 4CIF real time Support Smart Playback Backup Export video data by USB Export video clips when playback Management and maintenance of backup devices Alarm and Exception Alarm for VCA Video loss Motion detection Tampering HDD Full HDD Error Network Disconnected IP Conflicted Illegal Login Recording Exception etc Alarm triggers full screen monitoring audible warming notifying surveillance center sending email and alarm output Automatic restore when system is abnormal Other Local Functions Users can operate device by mouse and remote control Three level user management admin user can create many operating accounts and define their op
92. red in the DynDNS website PeanutHull Enter the User Name and Password obtained from PeanutHull website 81 DS 7600 Series NVR User s Manual NO IP Enter Server Address for NO IP 2 Enter the domain obtained from the DynDNS website www no ip com in the Domain Name textbox 3 Enter the User Name and Password registered the NO IP website HiDDNS The Server Address defaults to www hik online com 2 Enter the Device Domain Name The domain name can only contain the lower case letter numeric and and it must start with the lower case letter and cannot end with 3 If you have more than one device you can register an account on www hik online com to do some management 4 Click the Apply button to save the settings Configuring SNMP You can use SNMP protocol to get device status and parameters related information To configure SNMP 1 Select the SNMP tab to enter the SNMP settings interface as shown in Figure 49 General DDNS Email NAT More Settings Enable SNMP Figure 75 SNMP Settings Menu Check the Enable SNMP checkbox Enter the IP address of SNMP host in the Trap Address textbox Enter the port of SNMP host in the Trap Port textbox Click the Apply button to save the settings Ae s Note Before setting the SNMP please download the SNMP software and manage to receive the device information via SNMP port By setting the Trap Address the NVR is allowed to s
93. s Detection Menu Select the camera to setup video loss detection in using the camera dropdown list Check the Enable Video Loss Detection checkbox Press the Set button to set up linkage action Select the Arming Schedule tab to set the arming schedule Up to 8 periods be configured If the same schedule can be applied in other days click Copy 2 Select the Linkage Action tab to set the actions to take if Video Loss is detected The detail instruction of the actions please refer to Page 75 5 Click the Apply button to save the settings Click OK to back to the previous menu 6 Click the Apply button on the Video Loss interface to save the settings i UI Configuring VCA can be enabled on any of the channels on your to detect events and trigger alarms To configure VCA 1 Enter the menu shown in Figure 86 1 by going to Menu gt Cameras Setup gt 109 DS 7600 Series NVR User s Manual Figure 86 1 VCA Menu Select the camera to setup VCA Alarm in using the camera dropdown list Check the Enable VCA Alarm checkbox Press the Set button to set up linkage action 1 Select the Arming Schedule tab to set the arming schedule Up to 8 periods can be configured If the same schedule can be applied in other days click Copy 2 Select the Linkage Action tab to set the actions to take if VCA event is detected The detail instruction of the actions please refer to Page 75 5 Clic
94. ser name and or is the mirror writing of the user name This type of password will not be accepted NVRs will not accept a Level 0 password Password contains two kinds of characters The Level 1 Weak combination is number lowercase letter or number uppercase letter and the password NVRs will accept a Level 1 password length is at least eight characters This type of password will be accepted Password contains two types of characters The combination is neither number lowercase letter nor number uppercase letter and the password length is at least eight characters This type of password will be accepted Password contains more than three types of characters and the password length is at least eight characters This type of password will be accepted NOTE Types of characters are lowercase letters uppercase letters numbers and special characters Only ASCII characters are allowed NOTE strength level indicator colors can vary by activation process model number and device type 38 DS 7600 Series NVR User s Manual CHAPTERS Getting Started 39 DS 7600 Series NVR User s Manual Starting Up and Shutting Down Your NVR Proper startup and shutdown procedures are crucial to expanding the life of your NVR Startup Your NVR Ensure the power supply is plugged into an electrical outlet It is HIGHLY recommended that an Uninterruptible Power Supply UPS be used in conjunction with the unit e
95. t has the default permission of local log search and remote log search e Operator Operator has the default permission of local log search remote log search two way audio and camera configuration 3 Click the OK button to confirm adding the user Once a new user has been created the fields behind Users will become editable as shown in Figure 55 admin Admin 00 00 00 00 00 00 1 Guest 00 00 00 00 00 00 perato O DQO OD OO O0 0U Figure 81 User Settings Menu Changing the permission of User The Administrator can change the permission of both guest and operator To change the permission 1 Enter the User menu shown in Figure 52 by going to Menu gt System Configuration gt User 2 Click to enter the Permission interface as shown in Figure 56 57 58 86 DS 7600 Series NVR User s Manual Remote Configuration Camera Configuration Figure 82 Local Configuration Permission Settings Menu Local Confiquration Camera Configuration B 3 Cancel Figure 83 Remote Configuration Permission Settings Menu Local Configuration Remote Confiquration Camera Permission Remote Live View Cancel Figure 84 Camera Configuration Permission Settings Menu 3 Set the operation permission of Local Configuration Remote Configuration and Camera Configuration for the user Local Configuration e Local Log Search Searching and viewing logs and system information of NVR 87 DS 7600 Series NVR User s Manual e Local Par
96. tem View Tool Help ivMS 4200 0 x Control Panel Main View Device Management Server Group Organization Device for Management 0 Encoding Device Activation C Refres Filter Add New Device admin Security Resource U HDD St Hisky Password User Name Password 000000000 Valid password range 5 can use a combination of numbers lowercase uppercase and special character for your password with at least two kinds of them contained Confirm Password 000000008 OK Cancel The Strength Meter 4 does not light up Online Device 5 Refresh Every 155 Add to Client Add All Modify Netinfo Reset Password Activate Filter Device Firmware Version Security Server Start Time soe 192 168 1 64 DS 2CD4A35FWD V5 3 0build 150417 Inactive 8000 2015 05 27 02 05 11 N J Encoding device DVR DVS NVR IPC IPD 10 102 102 DS 2CD6412FWD 11 V5 1 7build 140904 Active 8000 2015 05 18 15 56 09 N iVMS 4200 PCNVR IVMS 4200 EncodeCard server 10 102 102 DS 7608NI SE 8P V2 3 10build 141128 Active 8000 2015 04 09 09 00 59 4 A 8 No e mail account is configured and all the sending operations are stopped Figure 22 Activation Window with Risky Inadequate Password Strength File System View Help iVMS 4200 Control Panel Ls Main View 2 Device Management Server wl
97. to delete the tag 73 DS 7600 Series NVR User s Manual CHAPTER7 Backup DS 7600 Series NVR User s Manual Backing up Video Clips Video clips can be backed up to various devices such as USB flash drives USB HDDs or a DVD writer Selecting Video Clips Video clips can be selected for backup in the Playback Interface using the controls found in the Mark Clip For Export panel shown in Figure 41 Figure 68 Mark Clip For Export Controls The controls found in the Mark Clip For Export panel include e Start Stop Button Mark the starting ending point for the video clip When you click the Start it will turn to the Stop button To select video clips in the Playback Interface 1 Enter the Playback Interface shown in Figure 42 by going to Menu gt Playback gt Record T i Event 01 I Tag Exit and save O2 clipe 03 04 lt 5 Camera 01 ME Zu nr File li Camera 01 07 08 09 10 11 12 iPCamera 13 SIPCamara 14 Smart START END Clipping Select the Select the START TIME END TIME Figure 69 Playback Menu 1 Insert a USB FLASH Drive or a USB HDD into an available USB Port 2 Goto gt 3 Select the DATE and beginning time of the incide
98. ttings Menu To set other actions including Full Screen Monitoring NVR will display the video image in full screen when motion is detected Audible Warning NVR will sound an audio warning if motion is detected in the designated regions of the camera Notify Surveillance Center NVR will notify surveillance center when motion is detected Send Email will send an email out to the designated recipients when motion 15 detected Please refer to configure email settings on Page 80 for details Trigger Alarm Output If the selected camera support alarm output NVR will trigger alarm output when motion is detected When you check the Trigger Alarm Output checkbox there will display a choose box to select Alarm Output No as shown in Figure 71 Irigger Channel Arming Schedule 1 2 6 23 97 8000 gt 1 Figure 71 Trigger Alarm Output Settings Menu 97 DS 7600 Series NVR User s Manual 8 Select the Apply button to save the motion detection settings and select OK to return to the previous menu Selecting the Cancel button without clicking Apply or OK will quit out of the menu without saving settings Configuring Alarm Inputs If the camera supports alarm input certain actions can be performed when an alarm input is triggered If no connected camera supports alarm input an attention message will pop up as shown below Figure 72 Alarm Attention Message To setup trigger actions 1 Enter the Trigger menu shown in Figure
99. ugh HDD settings To managing HDD Group 1 Enter the HDD menu by going to Menu gt System Configuration gt HDD 2 Select the Storage Mode tab as shown in Figure 93 3 Select the Mode to Group as shown in Figure 94 o system Configuration HDD Information Record Information Storage M Mode 1 j Figure 94 Group Mode Settings Menu 4 Click the Apply button to pop up an attention box as shown below Attention Figure 95 Attention for reboot 5 Click Yes to reboot and make the settings effective Click No to cancel the operation 117 DS 7600 Series NVR User s Manual 6 After rebooting you can configure local HDD settings To configure local HDD settings by going to Menu System Configuration HDD HDD Information 1 Select a HDD and click to pop up the Local HDD Settings menu as shown in Figure 96 1 863GB Cancel Figure 96 Local HDD Settings 2 Select the HDD Property from R W Read only and Redundancy Read only mode can prevent important recorded files from being overwritten when the HDD becomes full in overwrite recording mode Redundancy mode can ensure high security and reliability by recording the video onto the redundancy HDD and R W HDD simultaneously 3 Select the Group number for the current HDD The default group number for each HDD is 1 4 Click the Apply button to save the settings and click OK to the up level menu Note At least 2 har
100. vers on the HDD Information menu Note Up to 8 NetHDD can be added 114 DS 7600 Series NVR User s Manual Formatting Disk A newly installed hard disk drive HDD must be first formatted before it can be used with your NVR Formatting the disk will erase all data on it To format a new disk l Enter the HDD menu by going to Menu System Configuration HDD 2 Select a disk to format If the disk is newly installed or not formatted the status will show up as Uninitialized 3 Click the Init button 4 Aconfirmation message similar to the one shown in Figure 90 will appear on the screen Click OK to continue formatting process Cancel Figure 90 Disk Format Confirmation 5 Aformat progress bar will be shown on the menu After the disk has been formatted the status of the disk will change to Normal Record Information Storage Mode Figure 91 Disk Format Progress Bar Enabling HDD Overwrite Enabling HDD overwrite will allow the NVR to overwrite the installed disks once the disks are full To enable HDD overwrite 1 Enter the HDD menu by going to Menu gt System Configuration gt HDD 2 Select the Record Information tab as shown in Figure 92 HDD Information Storage Mode HDD Figure 92 Record Information Menu 3 Check the Overwrite checkbox 4 Click the Apply button 5 Click to exit 115 DS 7600 Series NVR User s Manual Enabling HDD Sleeping Enabling HDD sleeping will let the not recording HDD
101. work cameras can be added Independent configuration for each channel including resolution frame rate bit rate image quality etc The video input output quality is configurable Each channel supports two kinds of compression parameters the continuous and event which can be configured locally and remotely Support watermark Local Monitoring Simultaneous HDMI and VGA outputs HDMI output and VGA output at up to 1920 1080P resolution Multiple screen display in live view 1s supported and the display sequence of screens is adjustable Live view screen can be switched in group and manual switch and automatic cycle live view is also provided the interval of automatic cycle can be adjusted The selected live view channel can be shielded Motion detection tamper proof video exception alert and video loss alert functions Privacy mask Several PTZ protocols supported PTZ preset patrol and pattern Zooming in by clicking the mouse and PTZ tracing by dragging mouse HDD Management Up to 2 SATA disks can be connected 8 network disks can be connected Each SATA hard disks and network disks with a maximum of 4TB storage capacity HDD group management HDD property redundancy read only read write R W HDD quota management different capacity can be assigned to different channel DS 7600 Series NVR User s Manual Support S M A R T and bad sector detection Recording Capture and playback Holiday reco
102. y CMe BCS 122 locking and Unlocking Recorded E168 ee Ue eed 124 CARA PT E R PLINY Re Matnagemehl eeomnt cte aces Ce oet a mon ate 125 Mapas e ccc RUN 126 UW the Sy Stemi EI iS Ee Een sib tendue but da SR d Esel sem d Road 126 Restore Derault SetttHg uide diens a ra tte MED KS 127 Expotrtnp Config Ura o usua ieu am ent Eua hd alistan a Da auc a oio 129 S vsterm ae 130 eue E 132 DS 7600 Series NVR User s Manual CHAPTER1 Introduction DS 7600 Series NVR User s Manual Overview Thank you for your purchase of DS 7600 Series Network Video Recorder NVR To get detailed information about the NVR please read through the Installation s Manual and this User s Manual thoroughly The DS 7600 series NVR is a new generation product developed by HIKVISION Built on an embedded platform the DS 7600 series NVR contains the perfect combination of rock solid reliability and high performance Figure 1 05 7600 Series NVR Product Features Compression Connecting the network cameras network dome and DVS Up to 16 net
103. y going to Menu gt System Maintenance gt Network Detection 2 Select the Traffic tab and you can view the sending rate and receiving rate information on the interface as shown in Figure 109 The traffic data 1s refreshed every 1 second Network Detection Network Stat LANT iuccessful Ethernet 8c e7 48 07 2c 1c 1500 100M Full dup Figure 109 Traffic Detection To configure network detection 1 Enter the Network Detection menu by going to Menu gt Maintenance gt Network Detection 2 Select the Network Detection tab to enter the Network Detection menu as shown in Figure 110 132 DS 7600 Series NVR User s Manual oystem Maintenance Traffic Network Di Network Stat Network Delay Packet Loss Test Network Packet Export Figure 110 Network Detection 3 Enter the destination address in the text field of Destination Address 4 Click the Test button to start testing network average delay and packet loss rate The testing result will pop up on the window as shown below Figure 111 Network Detection Result 5 Click the Status to check the network status If you don t input the DNS address there will pop up a result window as shown below Figure 112 Attention Message 133 DS 7600 Series NVR User s Manual 6 You click the Network button to check the network information and you can configure network settings in this interface 10M 100M 1000M Self adaptive 172 6 23 10 255 255 255
104. y un checking the checkbox next to the channel You can also select recording in Full Screen mode by double click the date on the calendar Up to 16 ch synchronous playback at 4CIF real time 72 DS 7600 Series NVR User s Manual Playing Back Tags 1 DoI pote 10 11 12 13 Enter the Tag interface shown in Figure 40 by going to Menu Playback Tag Normal v Normal Min Ca Camera 01 iPCamera 02 03 Smart 04 Sub periods 2 Camera 01 07 08 09 10 11 iPCamera 12 13 14 External File Figure 67 Tag Playback Interface Select channel on the Channel dropdown list Select tag type for Tag Keyword or If tag type was Keyword Keyword area was editable to allow user to set keywords for fast searching Select start time and end time Select the pre play and post play time Click the Search button and the tag recording found will be listed in Result interface Click or double click the tag you want to play and it will be display in Playback interface as shown in Figure 40 Drag the timeline to the place you want to play Click to enable or disable the audio Click to play back the pictures in Full Screen mode Click to edit tag name Click

DS-7604NI-E1/4P DS-7608NI-E2/8P DS-7616NI

Contents

Download Pdf Manuals

Related Search

Related Contents