Home

LCD MONITOR USER`S MANUAL - Karin Technology Holdings

image

Contents

1. AUTO SETUP _ To auto adjust press the button EO Automatically adjusts the clock phase H V position ste eel values for the most optimal settings Automatically adjust the R G B to a suitable color in ALL RESET Return to factory preset value OSDPOSITION Changes the OSD position 15 5 2 LANGUAGE optional and to choose OSD language Represents the TEXT mode Sa AFER MOJE Represents the GRAPHIC mode Gy COLOR STANDARD Factory preset color STANDARD Factory preset color preset color o MUTE Disable or enable sound Q VOLUME Adjust the volume of built in speaker FOR YOUR SAFETY WARNING ALWLAYS OPERATE UNDER SPECIFIED POWER SUPPLY Usage of incorrect voltage will cause malfunction and may cause fire or electric shock PROTECT and CORRECTLY USE THE CABLE Do not pull or bend the power cable and signal cable or place the monitor or any heavy objects on the cables If the cables are damaged they may cause fire or electric shock IMMEDIATELY STOP OPERATING THE MONITOR WHEN YOU DETECT ANY ABNORMAL OCCURENCE If you notice any abnormal phenomenon such as strange noise smoke or smells unplug the monitor and contact your dealer or the nearest service center immediately DO NOT REMOVE THE CABINET Removing the cabinet may expose you to the danger of fire or electric shock DO NOT PUT ANY FOREIGN OBJECT INSIDE THE MONITOR lt may cause fire electric shock or damage when ope
2. Safety EN 60950 Low Voltage Directive 73 23 ENERGY STAR This product meets the Energy Star guidelines for energy efficiency TCO 99 White Color Only 95 For All Colors Congratulations You have just purchased a TCO 99 TCO 95 approved and labeled products Your choice has provided you with a product developed for professional use Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products 10
3. the problem remains d If the problem you have experienced is not described below or you cannot correct the problem stop using the monitor and contact your dealer or the nearest service center for further assistance PROBLEM CHECK TO SEE No Display If the power cord is firmly plugged in the socket If the power switch is turned If the AC socket is OK Please check using another piece of equipment If the blank screen saver is active touch the keyboard or mouse is green If the computer is ON If the signal cable is properly connected If the signal timing of the computer is within the spec of the monitor If the monitor is on power management mode touch the keyboard or the mouse Power indicator If the computer is ON is amber If the signal cable is properly connected If the signal timing of the computer is within the spec Display is too darkor too broht If the video output level of the computer is within the spec Display is not in l If the signal timing of the computer is within the spec Display is If the power voltage is within the spec shaking If the signal timing of the computer is within the spec Displav is not If the signal cable is properly connected ni rae If the signal timing of the computer is within the spec y the video output level of the computer is within the spec 4 When ATTENTION is displayed a Power indicator does not light up a
4. LCD MONITOR USER S MANUAL GETTING STARTED 1 4 4 4 1 1 2 1 1 FEATURES 1 UNPACKING AND CHECKING OF THE PACKAGE 1 INSTALLING THE 000 1 OPERATING THE 3 How TO USE THE OSD ON SCREEN 4 THE ADJUSTMENT OF MONITOR S SCREEN DISPLAY 4 ADJUSTING THE VIEWING 5 MENU TABLE 6 FOR YOUR 7 SPECIAL NOTES ON LCD 5 8 4 4 004 8 SUPPORTED 4 0 8 TROUBLESHOOTING PROCEDURES 9 POWER MANAGEMENT 0ccceccecececccceccacececeacececeacececeaceueaeacenss 9 CONFORMITY AND 10 GETTING STARTED WARNING Do not operate the LCD monitor with unspecified power supply Usage of incorrect voltage will cause
5. POWER MANAGEMENT is set to OFF 1 Check if the signal cable is connected correctly to the computer 2 Check if the cable is broken o POWER MANAGEMENT is set to ON 1 Check the signal cable is connected 2 Check the cable line is broken 3 Check the POWER MANAGEMENT function is operated correctly After 5 seconds s Pow gF of Display Power Management The LCD Monitor complies with the VESA DPMS version 1 0p power management proposal The VESA DPMS proposal provides four phases of power saving modes by detecting the horizontal or vertical sync signal Recovery 4 On Normali Green Normal On CONFORMITY AND COMPLIANCE FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation This device generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this device does cause harmful interference to radio or television reception this can be determined by turning t
6. dio Cable User s Manual Already Built in optional Installing the Monitor DO NOT install the monitor where sudden temperature changes may occur or in humid dusty or smoky areas as may cause fire electric shock or damage DO NOT place your LCD Monitor near a window as it may be severely damaged if exposed to rain water moisture or sunlight MAINTAIN good ventilation covering of ventilation slots holes may cause fire PLACE the monitor at least 4 or 10 cm way from the walls SAFE storage temperature of the LCD Monitor is in a range of 20 to 65 Connecting the Monitor 1 Turn off your PC before connecting your LCD monitor to the PC 2 the monitor out from the box and assemble it with the detachable base Note Make sure to hock the brace Into the right position of the base 3 Take off the plastic cover on the rear bezel of the LCD monitor Note Make sure the surface of the table is clean and covered with a soft cloth to prevent damaging or scratching the panel when assembling the LCD monitor 4 Connect signal cable s Audio cable and DC adapter connector to your Monitor Make sure the cable heads are securely connected 5 Assemble the plastic cable cover back to the rear cover of the LCD monitor 6 Connect the other end of VGA cable to the VGA port of the PC system Make sure the cable head is securely connected 7 Connect the other end of Audio cable to
7. easons turn off the power switch and unplug the monitor before cleaning Do scratch rub the screen with a hard object Never use any of the following solvents on the LCD monitor Such harsh chemicals may cause damage to the cabinet and the LCD screen Thinner Spray type cleaner Benzene Wax Abrasive cleaner Acid or Alkaline solvent Rubbing the cabinet with products made of rubber or plastic for a long period of time may cause degeneration or loss of paint on the cabinet Cabinet Remove dirt with a lightly moistened cloth and mild solvent detergent Then wipe the cabinet with a soft dry cloth LCD Periodic cleaning with soft dry cloth is recommended Do not use tissue to clean the screen It damage the LCD screen Supported Timing j Display Mode Horizontal Frequenc Vertical Frequenc 31 5 KHz 60 0 Hz VGA 37 5 KHz 75 0 Hz 720 x 400 31 5 KHz 70 1 Hz 35 1 KHz 56 3 Hz 37 9 KHz 60 3 Hz ene een 46 9 KHz 75 0 Hz 48 1 KHz 72 0 Hz 48 4 KHz 60 0 Hz 56 5 KHz 70 0 Hz 60 0 KHz 75 0 Hz 640 480 3550 2 667Hz 832 624 49 7 2 74 6 Hz MS DOS 640x350 31 5 KHz 70 1 Hz Troubleshooting Procedures If the LCD monitor fails to function correctly please follow the following steps for a possible solution 1 Perform the adjustments according to Operating the Monitor 2 Refer to the following items if you cannot find a proper item listed in the Operating the Monitor or if
8. he device off and on you are encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Caution To comply with the limits for an Class computing device you should use the shielded signal cord and power cord supplied with this unit The Federal Communication Commission warns that changes or modifications of the unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Radio Frequency Interference Statement Warning This is a Class B product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Canadian Doc Notice For Class B Computing Devices This digital apparatus does not exceed the Class limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulation of the Canadian Department of Communications CE MARKING DECLARATION OF CONFROMITY The LCD monitor complies with the requirements of related European standards which include Emission EN 55022 61000 3 2 61000 3 3 Immunity 50082 1
9. malfunction and may cause fire or electric shock Introduction Bright and sharp images of text and graphics are what you will find with your LCD color monitor The LCD monitor provides a maximum resolution of 1024 x 768 pixels with a flicker free display at up to 75Hz refresh rates that offers bright sharp and vibrant color display without the radiation emission and hazards of CRT monitors Features Supports XGA resolution of 1024 768 pixels VESA DPMS compliant power saving e Digital Character Smoothing e Automatic Set Up Ergonomic Design TCO Approved Windows 95 98 2000 Plug amp Play Compliant Versatile functional amp User friendly OSD Plug amp Play Conform to the VESA standards and support DDC1 2B spec Unpacking and Checking of the Package Contents Before unpacking your LCD Monitor prepare a suitable workspace for your LCD Monitor and computer You need a stable level and clean surface near a wall outlet 1 Set the LCD Monitor box an upright position and open from the top of the box before removing the right left cushions Note Please notice that the AC DC adaptor is placed on the side of the cushion make sure the adaptor will be held and removed out from the carton while removing the cushion 2 Remove the back cover from your monitor pull from the bottom of cover to open to install your PC system Accessories 1 pc 1 1 pc 1 pc pc 1 pc VGA Cable AC DC Adaptor Power Cord Au
10. o Use the OSD Screen Display OSD function allows the user to easily adjust the display to the desired quality Structure of OSD l 50 Main Menu 60 0 KHz V 75 0 Hz AI 1024 X 768 Operating Procedure Power on the LCD monitor Press to pop up OSD menu Press to select main menu item Press to select sub menu item Press and buttons to adjust Press the EXIT button when finish adjusting 4 The Adjustment of Monitor s Screen Display There two ways to adjust the monitor s screen auto adjustment and manual adjustment Auto adjustment 1 2 3 Power ON the LCD monitor and computer Select AUTO SETUP of OSD screens by pressing the button to AUTO SETUP Press button while displaying AUTO SETUP screen The auto adjustment is started AUTO SETUP will be displayed during auto adjustment It takes about 10 seconds to finish adjustment Manual adjustment a b Power ON the LCD monitor and computer 6 PROCEED GO OKAZ Vo 75 0 HZ 14 1024 768 Adjust according to the aforementioned Operating Procedure and Menu Table to adjust the screen to your favorable screen display OSD Adjustment Lock This function is used to prevent changing the adjusted status by mistake All the adjusting items except BRIGHTNESS will be l
11. ocked Press the and buttons simultaneously and the CONTROL LOCK screen is displayed Press button and it will become OFF ON CONTROL LOCK status The LOCKED will be displayed in the up right corner of screen indicating that OSD is in locked NOTE posite Do not touch the scr E an angle It may damage Bee ee eee catch your fingers wh cl 1024 X 768 CONTROL 22 55 1 an 293 Cy TA buttons simultaneously and CONTROL T 2 LOCK screen will appear Press he button to release the CONTROL LOCK 1024 X 768 The CONTROL LOCK screen will disappear automatically Volume control directly push and button to turn up down audio volume Adjusting the Viewing Angle Your LCD Monitor is designed to allow you to adjust it to an optimal viewing angle Menu Table Main Sub FunctionName Function 00 BRIGHTNESS _ Adjusts the level of brightness and darkness CONTRAST Adjusts the RGB color pattern set of the contrast Adjusts the number of pixels from source video CLOCK PHASE PHASE CLOCK PHASE Adjusts the phase relative to video H sync signal Adjusts the phase relative to video H sync signal phase relative to video H sync signal HORIZONTAL POSITION Moves the screen horizontally left right VERTICAL POSITION Moves the screen vertically up down
12. rating the monitor with foreign objects inside DO NOT USE THE MONITOR NEAR WATER Operating the monitor in close proximity to water where the water may be spilt or splashed onto the monitor may cause fire or electric shock BAD WEATHER CONDITIONS It is advisable not to operate the monitor during heavy thunderstorms as intermittent breaks in power may cause malfunction Do not touch the plug under these circumstances as it may cause electric shock CAUTION DISCONNECT CABLES WHEN MOVING THE MONITOR When moving the monitor always turn off the switch unplug the monitor and disconnect the signal cable If the cables are not properly disconnected when moving the monitor it may cause fire or electric shock DO NOT TOUCH THE PLUG WITH WET HANDS Pulling or inserting the plug with wet hands may cause electric shock HOLD THE PLUG WHEN DISCONNECTING To disconnect the power cable or signal cable always pull the cable by the plug Never pull on the cable as this may cause fire or electric shock OTHERS ERGONOMICS RECOMMENDATIONS Do not operate the monitor in a dark room or against a bright background For optimal viewing comfort the monitor should be just below eye level and 30 60 cm 16 24 inches away from your eyes When using the monitor over a prolonged period of time a ten minute break per hour is recommended SPECIAL NOTES ON LCD MONITORS The following are normal with LCD monitors and do not indicate a problem When fi
13. rst turning on the LCD monitor if the picture does not fit in the display area it is because of the type of computer that is used In such case adjust the picture position to its correct position See Operating the Monitor The screen may flicker during initial use Turn off the power switch and then turn it on again the flickering should disappear Users may notice a little uneven brightness on the screen depending on the desktop pattern they use is normal for LCD monitors to show such uneven brightness Due to the nature of the LCD screen switching of images after a prolonged period of time of displaying the same image the image from the previous screen may remain In such case the screen is recovered slowly by changing the image or turning off the power switch for hours If the screen becomes dark flickers does light up contact your dealer the nearest service center for a backlight replacement Do not attempt to replace it yourself If you need return your unit for service and the original packaging was discarded please contact your dealer or the nearest service center for advice or replacement of packaging Cleaning WARNING If you dropped any material or liquid such as water onto the monitor when cleaning unplug the power cable immediately and contact your dealer or the nearest service center Always make sure your hands are dry when unplugging the power cable CAUTION For safety r
14. sound card s Audio out jack 8 Plug the female end of the power cord into the AC adaptor 9 Connect the male end of the power cord into a wall socket 10 Turn on your computer and then turn on your LCD Monitor NOTE For added protection it is recommended to use a Surge Protection device plugged between the AC Adapter and the electrical wall outlet to prevent the effects of sudden current variations from reaching the LCD Monitor Sudden peaks of electricity may cause damage to the Monitor OPERATING THE MONITOR The LCD monitor has been preset at the factory with the Timing shown in Appendix to create optimal picture Users are also able to adjust the picture to the desired brightness and sharpness by following the instructions Buttons Functions EXIT Button Exit the OSD On Screen Display Press to bring up the On Screen Display and select main menu items Press to bring up the On Screen Display and 7655 sub menu items Adjust sub setting bars CONTRAST Minus key BRIGHTNESS etc to decrease setting values of the OSD Adjust setting bars i e CONTRAST Plus key BRIGHTNESS etc to increase setting values of the OSD Green Normal operation Amber Power Management i e DPMS mode reduces power consumption lt 5W when receiving no horizontal and or vertical sync signal Power Switch For turning ON OFF the monitor LED power status display How t

Download Pdf Manuals

image

Related Search

Related Contents

Swann T3 User's Manual  05603 – Manual for Hand Portable Carbon  ビッグスクーター  Pro'sKit MT-1132 multimeter  USER MANUAL ENDOVUE 24 SURGICAL DISPLAY  MANUEL D`UTILISATION  Hitachi CP-X4014WN User's Manual  Installation Manual  Le programme pdf 924Ko - Région Midi  Fiche technique Régulateur automatique - Maison  

Copyright © All rights reserved.
DMCA: DMCA_mwitty#outlook.com.